I.S. EN 187105:2002
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
SINGLE MODE OPTICAL CABLE (DUCT/DIRECT BURIED INSTALLATION)
Hardcopy , PDF
13-05-2021
English
01-01-2002
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
1 Scope
2 Normative references
3 Terminology
4 General information
4.1 General cable description
4.1.1 Characteristics of optical fibre
4.1.2 Characteristics of optical fibre cable elements
4.1.3 Characteristics of optical fibre cables
4.1.4 Environmental and product safety requirements
4.1.5 Informative note: Upgrading to meet future network
requirements
4.2 Optical fibre spliceability
4.3 Testing
5 Requirements for cabled single mode optical fibres
5.1 Fibre materials
5.2 Optical requirements
5.2.1 Attenuation coefficient
5.2.2 Point discontinuities
5.2.3 Chromatic dispersion
5.2.4 Cut-off wavelength
5.2.5 Mode field diameter
5.2.6 Macrobending sensitivity
5.2.7 Polarisation mode dispersion (PMD)
5.2.8 Refractive group index
5.3 Geometrical requirements
5.3.1 Mode field concentricity error
5.3.2 Primary coating non circularity
5.3.3 Cladding/primary coating concentricity error
5.4 Mechanical requirements
5.4.1 Fibre proof test
5.4.2 Coating strip force
5.4.3 Stress corrosion susceptibility
6 Requirements for cable elements
6.1 Element design
6.1.1 Modularity
6.1.2 Fibre and elements identification
6.2 Element characteristics
6.2.1 Ribbon
6.2.2 Tube kinking
7 Requirements for optical cables
7.1 Cable construction
7.1.1 Cable core
7.1.2 Anti-buckling and strength elements splicing
7.1.3 Cable element stranding
7.1.4 Spliced fibres
7.1.5 Spare fibres
7.1.6 Cable sheath removal
7.2 Cable marking
7.2.1 Cable marking
7.2.2 Identification marking
7.2.3 Cable length marking (if required)
7.3 Cable materials
7.3.1 Tube filling compound material
7.3.2 Water-blocking material
7.3.3 Filling and water-blocking material flow
7.3.4 Cable material compatibility
7.4 Cable sheath
7.4.1 Sheath material
7.4.2 Sheath thickness
7.4.3 Outer cable diameter
7.4.4 Moisture barrier
7.5 Mechanical requirements
7.5.1 Cable bend
7.5.2 Cable impact
7.5.3 Cable crush
7.5.4 Cable tensile performance
7.5.5 Cable torsion
7.5.6 Cable repeated bending
7.6 Environmental requirements
7.6.1 Temperature cycling
7.6.2 Stripping force stability of cabled optical fibres
7.6.3 Water penetration
7.6.4 Hydrogen in cables
7.6.5 Environmental impact
7.7 Electrical protection
7.7.1 Continuity of metallic members
7.7.2 Lightning damage susceptibility
8 Product qualification requirements
8.1 General
8.2 Definitions
8.3 Optical fibre qualification
8.4 Cable qualification
8.4.1 Cable element qualification
8.4.2 Optical fibre cable qualification
Includes proposed functional mechanical, environmental and optical requirements, recommended features, and test methods for assessing the product against the stated requirements.
DevelopmentNote |
To be used in conjunction with EN 60794-3 and EN 60794-3-10. (09/2002)
|
DocumentType |
Standard
|
Pages |
42
|
PublisherName |
National Standards Authority of Ireland
|
Status |
Withdrawn
|
Standards | Relationship |
SN EN 187105 : 2002 | Identical |
NF EN 187105 : 2002 | Identical |
EN 187105:2002 | Identical |
DIN EN 187105 : 2002 | Identical |
NEN EN 187105 : 2002 | Identical |
BS EN 187105:2002 | Identical |
EN 60794-3-10:2015 | Optical fibre cables - Part 3-10: Outdoor cables - Family specification for duct, directly buried or lashed aerial optical telecommunication cables |
EN 60793-1-32:2010 | Optical fibres - Part 1-32: Measurement methods and test procedures - Coating strippability |
IEC 60793-1-5:1995 | Optical fibres - Part 1: Generic specification - Section 5: Measuring methods for environmental characteristics |
EN 60793-1-44:2011 | OPTICAL FIBRES - PART 1-44: MEASUREMENT METHODS AND TEST PROCEDURES - CUT-OFF WAVELENGTH |
EN 60793-1-30:2011 | Optical fibres - Part 1-30: Measurement methods and test procedures - Fibre proof test |
IEC 60793-1-4:2001 | Optical fibres - Part 1-4: Generic specification - Measuring methods for transmission and optical characteristics |
IEC 60793-2:2015 | Optical fibres - Part 2: Product specifications - General |
EN 60794-3:2015 | Optical fibre cables - Part 3: Sectional specification - Outdoor cables |
EN 60794-1-1:2016 | Optical fibre cables - Part 1-1: Generic specification - General |
EN 188102:1995 | Family Specification: Single-mode dispersion shifted (B2) optical fibre |
EN 60793-1-40:2003 | Optical fibres - Part 1-40: Measurement methods and test procedures - Attenuation |
EN 188000 : 1992 | GENERIC SPECIFICATION FOR OPTICAL FIBRES |
EN 61663-1 : 1999 | LIGHTNING PROTECTION - TELECOMMUNICATION LINES - PART 1 - FIBRE OPTIC INSTALLATIONS |
EN 50290-2-28:2002 | Communication cables - Part 2-28: Common design rules and construction - Filling compounds for filled cables |
IEC 60793-1-2:1995 | Optical fibres - Part 1: Generic specification - Section 2: Measuring methods for dimensions |
IEC TR 61931:1998 | Fibre optic - Terminology |
EN 60794-1-2:2017/AC:2017-07 | OPTICAL FIBRE CABLES - PART 1-2: GENERIC SPECIFICATION - BASIC OPTICAL CABLE TEST PROCEDURES - GENERAL GUIDANCE (IEC 60794-1-2:2017) |
HD 402 : 200S2 | STANDARD COLOURS FOR INSULATION FOR LOW-FREQUENCY CABLES AND WIRES |
EN 60793-1-42:2013/AC:2013 | OPTICAL FIBRES - PART 1-42: MEASUREMENT METHODS AND TEST PROCEDURES - CHROMATIC DISPERSION |
EN 188100:1995 | Sectional Specification: Single-mode (SM) optical fibre |
EN 188101:1995 | Family Specification: Single-mode dispersion unshifted (B1.1) optical fibre |
EN 50290-2-24 : 2002 AMD 1 2008 | COMMUNICATION CABLES - PART 2-24: COMMON DESIGN RULES AND CONSTRUCTION - PE SHEATHING |
EN 60811-1-1:1995/A1:2001 | INSULATING AND SHEATHING MATERIALS OF ELECTRIC CABLES - COMMON TEST METHODS - GENERAL APPLICATION - MEASUREMENT OF THICKNESS AND OVERALL DIMENSIONS - TESTS FOR DETERMINING MECHANICAL PROPERTIES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.