I.S. EN 1765:2016
Current
The latest, up-to-date edition.
RUBBER HOSE ASSEMBLIES FOR OIL SUCTION AND DISCHARGE SERVICES - SPECIFICATION FOR THE ASSEMBLIES
Hardcopy , PDF
English
01-01-2016
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
National Foreword
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Classification
5 Materials and construction
6 End connections
7 Dimensions and tolerances
8 Physical properties
9 Test report
10 Type testing
11 Frequency of testing
12 Marking
Annex A (informative) - Information to be supplied by the
purchaser
Annex B (informative) - Recommendations for packaging and
transportation of oil suction and discharge hose
assemblies
Annex C (informative) - Masses
Annex D (normative) - Wet adhesion test
Annex E (normative) - Hydrostatic test for suction and
discharge hose assemblies
Annex F (normative) - Minimum bend radius test
Annex G (normative) - Burst test
Annex H (normative) - Test frequency for type testing and
routine test
Annex I (informative) - Test frequency for production
acceptance tests
Defines the characteristics of four types of oil suction and discharge hose assemblies used for the conveyance of petroleum, including crude oils and other liquid petroleum products containing a maximum aromatics content of 50% (v/v).
| DocumentType |
Standard
|
| Pages |
34
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| UNE-EN 1765:2017 | Identical |
| DIN EN 1765:2016-12 | Identical |
| NBN EN 1765 : 2016 | Identical |
| UNI EN 1765 : 2005 | Identical |
| SN EN 1765 : 2017 | Identical |
| NS EN 1765 : 1997 | Identical |
| NEN EN 1765 : 2016 | Identical |
| NF EN 1765 : 2016 | Identical |
| EN 1765:2016 | Identical |
| BS EN 1765:2004 | Identical |
| DIN EN 1765:1997-11 | Identical |
| EN ISO 8330:2014 | Rubber and plastics hoses and hose assemblies - Vocabulary (ISO 8330:2014) |
| EN ISO 7233:2016 | Rubber and plastics hoses and hose assemblies - Determination of resistance to vacuum (ISO 7233:2016) |
| EN ISO 1402:2009 | Rubber and plastics hoses and hose assemblies - Hydrostatic testing (ISO 1402:2009) |
| EN ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009) |
| ISO 4649:2017 | Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using a rotating cylindrical drum device |
| EN ISO 8031:2009 | Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity (ISO 8031:2009) |
| ISO 7233:2016 | Rubber and plastics hoses and hose assemblies Determination of resistance to vacuum |
| ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods |
| EN 14420-4:2013 | Hose fittings with clamp units - Part 4: Flange connections |
| EN ISO 8033:2017 | Rubber and plastics hoses - Determination of adhesion between components (ISO 8033:2016) |
| EN 14420-2:2013 | Hose fittings with clamp units - Part 2: Hose side parts of hose tail |
| ISO 8330:2007 | Rubber and plastics hoses and hose assemblies Vocabulary |
| ISO 15614-1:2017 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys |
| ASME B1.20.1 : 2013(R2018) | PIPE THREADS, GENERAL PURPOSE (INCH) |
| ISO 1431-1:2012 | Rubber, vulcanized or thermoplastic Resistance to ozone cracking Part 1: Static and dynamic strain testing |
| EN ISO 1460:1994 | Metallic coatings - Hot dip galvanized coatings on ferrous materials - Gravimetric determination of the mass per unit area (ISO 1460:1992) |
| EN 14420-3:2013 | Hose fittings with clamp units - Part 3: Clamp units, bolted or pinned |
| ISO 1460:1992 | Metallic coatings Hot dip galvanized coatings on ferrous materials Gravimetric determination of the mass per unit area |
| ISO 7005-1:2011 | Pipe flanges — Part 1: Steel flanges for industrial and general service piping systems |
| ISO 1402:2009 | Rubber and plastics hoses and hose assemblies Hydrostatic testing |
| ISO 8033:2016 | Rubber and plastics hoses Determination of adhesion between components |
| ISO 8031:2009 | Rubber and plastics hoses and hose assemblies Determination of electrical resistance and conductivity |
| ISO 1817:2015 | Rubber, vulcanized or thermoplastic Determination of the effect of liquids |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.