I.S. EN 16682:2017
Current
The latest, up-to-date edition.
CONSERVATION OF CULTURAL HERITAGE - METHODS OF MEASUREMENT OF MOISTURE CONTENT, OR WATER CONTENT, IN MATERIALS CONSTITUTING IMMOVABLE CULTURAL HERITAGE
Hardcopy , PDF
English
01-01-2017
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
National Foreword
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations
5 Moisture and water content in materials
6 Absolute and relative methods
7 Taking and handling samples
8 Calibration
9 Use of existing European Standards concerning modern
building materials
10 Test report
Annex A (normative) - Absolute methods
Annex B (normative) - Relative methods
Annex C (informative) - Other relative methods
Annex D (informative) - Methods with special safety requirements
Bibliography
Defines a basic framework to take and interpret this kind of measurements on the above cultural heritage materials that have undergone weathering, pest attack, salt migration or other transformations over time.
| DocumentType |
Standard
|
| Pages |
70
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Standards | Relationship |
| EN 16682:2017 | Identical |
| ISO 7183:2007 | Compressed-air dryers Specifications and testing |
| EN 13183-3:2005 | Moisture content of a piece of sawn timber - Part 3: Estimation by capacitance method |
| EN 15757:2010 | Conservation of Cultural Property - Specifications for temperature and relative humidity to limit climate-induced mechanical damage in organic hygroscopic materials |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| EN ISO 374-1:2016 | Protective gloves against dangerous chemicals and micro-organisms - Part 1: Terminology and performance requirements for chemical risks (ISO 374-1:2016) |
| EN ISO 13130:2011 | Laboratory glassware - Desiccators (ISO 13130:2011) |
| EN 455-1:2000 | Medical gloves for single use - Part 1: Requirements and testing for freedom from holes |
| ISO 3567:2011 | Vacuum gauges — Calibration by direct comparison with a reference gauge |
| EN 322:1993 | Wood-based panels - Determination of moisture content |
| ISO 9712:2012 | Non-destructive testing Qualification and certification of NDT personnel |
| ISO 3529-3:2014 | Vacuum technology — Vocabulary — Part 3: Total and partial pressure vacuum gauges |
| EN 16085:2012 | Conservation of Cultural property - Methodology for sampling from materials of cultural property - General rules |
| EN 16096:2012 | Conservation of cultural property - Condition survey and report of built cultural heritage |
| ISO 5280:1979 | Xylene for industrial use — Specification |
| EN 1428:2012 | Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Azeotropic distillation method |
| EN ISO 15512:2016 | Plastics - Determination of water content (ISO 15512:2016) |
| UNI 11085 : 2003 | CULTURAL HERITAGE - NATURAL AND ARTIFICIAL STONES - MOISTURE CONTENT DETERMINATION: GRAVIMETRIC METHOD |
| BS 812-109:1990 | Testing aggregates Methods for determination of moisture content |
| EN 15758:2010 | Conservation of Cultural Property - Procedures and instruments for measuring temperatures of the air and the surfaces of objects |
| EN 13040:2007 | Soil improvers and growing media - Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density |
| UNI 11086 : 2003 | CULTURAL HERITAGE - NATURAL AND ARTIFICIAL STONES - DETERMINATION OF EQUILIBRIUM MOISTURE CONTENT |
| ASTM D 4442 : 2016 : REDLINE | Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Based Materials |
| ISO 11461:2001 | Soil quality — Determination of soil water content as a volume fraction using coring sleeves — Gravimetric method |
| ISO 10304-1:2007 | Water quality Determination of dissolved anions by liquid chromatography of ions Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate |
| UNI 11121 : 2004 | CULTURAL HERITAGE - NATURAL AND ARTIFICIAL STONES - IN FIELD WATER CONTENT DETERMINATION BY CALCIUM- CARBIDE METHOD |
| ISO 2596:2006 | Iron ores — Determination of hygroscopic moisture in analytical samples — Gravimetric, Karl Fischer and mass-loss methods |
| ISO/IEC Guide 99:2007 | International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
| EN 420:2003+A1:2009 | Protective gloves - General requirements and test methods |
| ISO 5272:1979 | Toluene for industrial use — Specifications |
| ISO 16979:2003 | Wood-based panels Determination of moisture content |
| ISO 13130:2011 | Laboratory glassware — Desiccators |
| ISO 20807:2004 | Non-destructive testing Qualification of personnel for limited application of non-destructive testing |
| ISO 15512:2016 | Plastics Determination of water content |
| EN ISO 11461:2014 | Soil quality - Determination of soil water content as a volume fraction using coring sleeves - Gravimetric method (ISO 11461:2001) |
| ISO/IEC 17024:2012 | Conformity assessment — General requirements for bodies operating certification of persons |
| EN 772-10:1999 | Methods of test for masonry units - Part 10: Determination of moisture content of calcium silicate and autoclaved aerated concrete units |
| ISO 760:1978 | Determination of water Karl Fischer method (General method) |
| UNI 9091-3 : 1989 | WOOD - DETERMINATION OF MOISTURE CONTENT - AZEOTROPIC DISTILLATION METHOD |
| ISO 1026:1982 | Fruit and vegetable products Determination of dry matter content by drying under reduced pressure and of water content by azeotropic distillation |
| EN 15898:2011 | Conservation of cultural property - Main general terms and definitions |
| ISO Guide 34:2009 | General requirements for the competence of reference material producers |
| EN ISO 10304-1:2009 | Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate (ISO 10304-1:2007) |
| EN ISO 14911:1999 | Water quality - Determination of dissolved Li+, Na+, NH4+, K+, Mn2+, Ca2+, Mg2+, Sr2+ and Ba2+ using ion chromatography - Method for water and waste water (ISO 14911:1998) |
| ISO/IEC Guide 98-3:2008 | Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) |
| ISO 14911:1998 | Water quality — Determination of dissolved Li+, Na+, NH4+, K+, Mn2+, Ca2+, Mg2+, Sr2+ and Ba2+ using ion chromatography — Method for water and waste water |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.