I.S. EN 16457:2014
Current
Current
The latest, up-to-date edition.
CHARACTERIZATION OF WASTE - FRAMEWORK FOR THE PREPARATION AND APPLICATION OF A TESTING PROGRAMME - OBJECTIVES, PLANNING AND REPORT
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-01-2014
Publisher
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Defining a waste testing programme
5 Carrying out a waste testing programme
6 Overall testing report
Annex A (normative) - Matrix testing steps versus
parameters specifying the standards to be
used in a waste testing programme
Annex B (informative) - A-deviations
Bibliography
Describes requirements for a waste testing programme regarding mainly objectives, planning and report with the intent to ensure reliable and comparable results when using the reference methods that have been developed and/or adopted by CEN/TC 292.
| DocumentType |
Standard
|
| Pages |
30
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Standards | Relationship |
| EN 16457:2014 | Identical |
| CEN/TR 15310-2:2006 | Characterization of waste - Sampling of waste materials - Part 2: Guidance on sampling techniques |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| EN 12457-2:2002 | Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 2: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 4 mm (without or with size reduction) |
| CEN/TR 16176:2011 | Characterization of waste - Screening methods for elemental composition by X-ray fluorescence spectrometry for on-site verification |
| ISO 11074:2015 | Soil quality — Vocabulary |
| CEN/TR 16130:2011 | Characterization of waste - On-site verification |
| CEN/TR 16365:2012 | Characterization of waste - Sampling of waste from extractive industries |
| EN 16377:2013 | Characterization of waste - Determination of brominated flame retardants (BFR) in solid waste |
| CEN/TR 16363:2012 | Characterization of waste - Kinetic testing for assessing acid generation potential of sulfidic waste from extractive industries |
| CEN/TR 15310-1:2006 | Characterization of waste - Sampling of waste materials - Part 1: Guidance on selection and application of criteria for sampling under various conditions |
| PREN 15863 : DRAFT 2013 | CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TEST FOR BASIC CHARACTERIZATION - DYNAMIC MONOLITHIC LEACHING TEST WITH PERIODIC LEACHANT RENEWAL, UNDER FIXED TEST CONDITIONS |
| EN 13137:2001 | Characterization of waste - Determination of total organic carbon (TOC) in waste, sludges and sediments |
| EN 15308:2016 | Characterization of waste - Determination of selected polychlorinated biphenyls (PCB) in solid waste by gas chromatography with electron capture or mass spectrometric detection |
| EN 14582:2016 | Characterization of waste - Halogen and sulfur content - Oxygen combustion in closed systems and determination methods |
| EN 12457-4:2002 | Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 4: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with size reduction) |
| EN 14346:2006 | Characterization of waste - Calculation of dry matter by determination of dry residue or water content |
| CEN/TR 15018:2005 | Characterization of waste - Digestion of waste samples using alkali-fusion techniques |
| ISO/IEC Guide 99:2007 | International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
| CEN/TS 15864:2015 | Characterization of waste - Leaching behaviour test for basic characterization - Dynamic monolithic leaching test with continuous leachant renewal under conditions relevant for specified scenario(s) |
| EN 12457-1:2002 | Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 1: One stage batch test at a liquid to solid ratio of 2 l/kg for materials with high solid content and with particle size below 4 mm (without or with size reduction) |
| EN 15192:2006 | Characterisation of waste and soil - Determination of Chromium(VI) in solid material by alkaline digestion and ion chromatography with spectrophotometric detection |
| ENV 13005 : DRAFT 1999 | GUIDE TO THE EXPRESSION OF UNCERTAINTY IN MEASUREMENT |
| EN 16192:2011 | Characterization of waste - Analysis of eluates |
| EN 15309:2007 | Characterization of waste and soil - Determination of elemental composition by X-ray fluorescence |
| CEN/TR 16110:2010 | Characterization of waste - Guidance on the use of ecotoxicity tests applied to waste |
| EN 12920:2006+A1:2008 | Characterization of waste - Methodology for the determination of the leaching behaviour of waste under specified conditions |
| ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
| EN 15002:2015 | Characterization of waste - Preparation of test portions from the laboratory sample |
| EN 15169:2007 | Characterization of waste - Determination of loss on ignition in waste, sludge and sediments |
| EN 13656:2002 | Characterization of waste - Microwave assisted digestion with hydrofluoric (HF), nitric (HNO3) and hydrochloric (HCl) acid mixture for subsequent determination of elements |
| EN 14345:2004 | Characterization of waste - Determination of hydrocarbon content by gravimetry |
| EN 12457-3:2002 | Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 3: Two stage batch test at a liquid to solid ratio of 2 l/kg and 8 l/kg for materials with high solid content and with particle size below 4 mm (without or with size reduction) |
| EN 14039:2004 | Characterization of waste - Determination of hydrocarbon content in the range of C10 to C40 by gas chromatography |
| EN 13657:2002 | Characterization of waste - Digestion for subsequent determination of aqua regia soluble portion of elements |
| EN 15527:2008 | Characterization of waste - Determination of polycyclic aromatic hydrocarbons (PAH) in waste using gas chromatography mass spectrometry (GC/MS) |
| CEN/TS 16229:2011 | Characterization of waste - Sampling and analysis of weak acid dissociable cyanide discharged into tailings ponds |
| CEN/TS 16023:2013 | Characterization of waste - Determination of gross calorific value and calculation of net calorific value |
| PREN 14997 : DRAFT 2013 | CHARACTERISATION OF WASTE - LEACHING BEHAVIOUR TEST - INFLUENCE OF PH ON LEACHING WITH CONTINUOUS PH CONTROL |
| CEN/TS 14405 : 2004 | CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TESTS - UP-FLOW PERCOLATION TEST (UNDER SPECIFIED CONDITIONS) |
| CEN/TR 15310-3:2006 | Characterization of waste - Sampling of waste materials - Part 3: Guidance on procedures for sub-sampling in the field |
| CEN/TS 15862:2012 | Characterisation of waste - Compliance leaching test - One stage batch leaching test for monoliths at fixed liquid to surface area ratio (L/A) for test portions with fixed minimum dimensions |
| EN 15216:2007 | Characterization of waste - Determination of total dissolved solids (TDS) in water and eluates |
| EN 14899:2005 | Characterization of waste - Sampling of waste materials - Framework for the preparation and application of a Sampling Plan |
| CEN/TR 15310-4:2006 | Characterization of waste - Sampling of waste materials - Part 4: Guidance on procedures for sample packaging, storage, preservation, transport and delivery |
| EN ISO 9000:2015 | Quality management systems - Fundamentals and vocabulary (ISO 9000:2015) |
| CEN/TR 15310-5:2006 | Characterization of waste - Sampling of waste materials - Part 5: Guidance on the process of defining the sampling plan |
| CEN/TS 15364:2006 | Characterization of waste - Leaching behaviour tests - Acid and base neutralization capacity test |
| PREN 14429 : DRAFT 2013 | CHARACTERISATION OF WASTE - LEACHING BEHAVIOUR TEST - INFLUENCE OF PH ON LEACHING WITH INITIAL ACID/BASE ADDITION |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.