I.S. EN 14906:2012
Current
The latest, up-to-date edition.
LEATHER - LEATHER FOR AUTOMOTIVE - TEST METHODS AND TESTING PARAMETERS
Hardcopy , PDF
English
01-01-2012
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 General principles
5 Sampling
6 Conditioning and sampling preparation
7 List of test methods
8 Test reports
Bibliography
Provides guidelines to select the test methods to assess the performance of leather for automotive.
DevelopmentNote |
Supersedes I.S. CEN/TS 14906. (06/2012)
|
DocumentType |
Standard
|
Pages |
13
|
PublisherName |
National Standards Authority of Ireland
|
Status |
Current
|
Supersedes |
Standards | Relationship |
EN 14906:2012 | Identical |
EN ISO 3377-1:2011 | Leather - Physical and mechanical tests - Determination of tear load - Part 1: Single edge tear (ISO 3377-1:2011) |
VDA 230-205 : 2005 | AUTOMOTIVE LEATHER - DETERMINATION LOOSE GRAIN EFFECT |
EN ISO 17186:2011 | Leather - Physical and mechanical tests - Determination of surface coating thickness (ISO 17186:2011) |
ISO 2588:2014 | Leather Sampling Number of items for a gross sample |
EN ISO 3376:2011 | Leather - Physical and mechanical tests - Determination of tensile strength and percentage extension (ISO 3376:2011) |
ISO 15701:2015 | Leather — Tests for colour fastness — Colour fastness to migration into polymeric material |
ISO 105-B06:1998 | Textiles Tests for colour fastness Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test |
ISO 11644:2009 | Leather — Test for adhesion of finish |
ISO 26082-1:2012 | Leather Physical and mechanical test methods for the determination of soiling Part 1: Rubbing (Martindale) method |
ISO 9237:1995 | Textiles — Determination of the permeability of fabrics to air |
EN ISO 4044:2017 | Leather - Chemical tests - Preparation of chemical test samples (ISO 4044:2017) |
EN ISO 9237:1995 | Textiles - Determination of permeability of fabrics to air (ISO 9237:1995) |
EN ISO 15701:2015 | Leather - Tests for colour fastness - Colour fastness to migration into polymeric material (ISO 15701:2015) |
VDA 278 : 2011 | THERMAL DESORPTION ANALYSIS OF ORGANIC EMISSIONS FOR THE CHARACTERIZATION OF NON-METALLIC MATERIALS FOR AUTOMOBILES |
EN ISO 2589:2016 | Leather - Physical and mechanical tests - Determination of thickness (ISO 2589:2016) |
ISO 17071:2006 | Leather — Physical and mechanical tests — Determination of fogging characteristics |
EN 15987:2015 | Leather - Terminology - Key definitions for the leather trade |
ISO 14268:2012 | Leather — Physical and mechanical tests — Determination of water vapour permeability |
ISO 5402-1:2017 | Leather Determination of flex resistance Part 1: Flexometer method |
ISO 2418:2017 | Leather — Chemical, physical and mechanical and fastness tests — Sampling location |
EN ISO 15700:1999 | Leather - Tests for colour fastness - Colour fastness to water spotting (ISO 15700:1998) |
EN ISO 2418:2017 | Leather - Chemical, physical and mechanical and fastness test - Sampling location (ISO 2418:2017) |
EN ISO 11640:2012 | Leather - Tests for colour fastness - Colour fastness to cycles of to-and-fro rubbing (ISO 11640:2012) |
ISO 23910:2017 | Leather — Physical and mechanical tests — Measurement of stitch tear resistance |
EN ISO 17071:2011 | Leather - Physical and mechanical tests - Determination of fogging characteristics (ISO 17071:2006) |
EN ISO 14087:2011 | Leather - Physical and mechanical tests - Determination of bending force (ISO 14087:2011) |
ISO 4044:2017 | Leather — Chemical tests — Preparation of chemical test samples |
ISO 2589:2016 | Leather Physical and mechanical tests Determination of thickness |
ISO 17076-2:2011 | Leather — Determination of abrasion resistance — Part 2: Martindale ball plate method |
EN ISO 17226-3:2011 | Leather - Chemical determination of formaldehyde content - Part 3: Determination of formaldehyde emissions from leather (ISO 17226-3:2011) |
VDA 277 : 1995 | NICHTMETALLISCHE WERKSTOFFE DER KFZ-INNENAUSSTATTUNG - BESTIMMUNG DER EMISSION ORGANISCHER VERBINDUNGEN |
EN ISO 105-B06:2004 | Textiles - Tests for colour fastness - Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test (ISO 105-B06:1998, including Amendment 1:2002) |
ISO 2420:2017 | Leather — Physical and mechanical tests — Determination of apparent density and mass per unit area |
ISO 11640:2012 | Leather Tests for colour fastness Colour fastness to cycles of to-and-fro rubbing |
EN ISO 17227:2002 | Leather - Physical and mechanical tests - Determination of dry heat resistance of leather (ISO 17227:2002) |
EN ISO 11644:2009 | Leather - Test for adhesion of finish (ISO 11644:2009) |
EN ISO 14268:2012 | Leather - Physical and mechanical tests - Determination of water vapour permeability (ISO 14268:2012) |
ISO 17227:2002 | Leather — Physical and mechanical tests — Determination of dry heat resistance of leather |
VDA 270 : 2016 | DETERMINATION OF THE ODOUR CHARACTERISTICS OF TRIM MATERIALS IN MOTOR VEHICLES |
EN ISO 17074:2011 | Leather - Physical and mechanical tests - Determination of resistance to horizontal spread of flame (ISO 17074:2006) |
EN ISO 17228:2015 | Leather - Tests for colour fastness - Change in colour with accelerated ageing (ISO 17228:2015) |
EN ISO 2419:2012 | Leather - Physical and mechanical tests - Sample preparation and conditioning (ISO 2419:2012) |
ISO 17186:2011 | Leather — Physical and mechanical tests — Determination of surface coating thickness |
EN 20105-A02:1994 | Textiles - Tests for colour fastness - Part A02: Grey scale for assessing change in colour (ISO 105-A02:1993) |
ISO 14087:2011 | Leather — Physical and mechanical tests — Determination of bending force |
ISO 105-A02:1993 | Textiles Tests for colour fastness Part A02: Grey scale for assessing change in colour |
ISO 17226-3:2011 | Leather — Chemical determination of formaldehyde content — Part 3: Determination of formaldehyde emissions from leather |
ISO 2419:2012 | Leather — Physical and mechanical tests — Sample preparation and conditioning |
ISO 17074:2006 | Leather — Physical and mechanical tests — Determination of resistance to horizontal spread of flame |
ISO 15700:1998 | Leather — Tests for colour fastness — Colour fastness to water spotting |
ISO 3376:2011 | Leather Physical and mechanical tests Determination of tensile strength and percentage extension |
EN ISO 5402-1:2017 | Leather - Determination of flex resistance - Part 1: Flexometer method (ISO 5402-1:2017) |
VDA 230-206 : 2007 | EXAMINATION OF THE STICK-SLIP BEHAVIOUR OF MATERIAL PAIRS PART 1 TO 3 |
EN ISO 2420:2017 | Leather - Physical and mechanical tests - Determination of apparent density and mass per unit area (ISO 2420:2017) |
EN ISO 17076-2:2011 | Leather - Determination of abrasion resistance - Part 2: Martindale ball plate method (ISO 17076-2:2011) |
ISO 17228:2015 | Leather — Tests for colour fastness — Change in colour with accelerated ageing |
ISO 3377-1:2011 | Leather — Physical and mechanical tests — Determination of tear load — Part 1: Single edge tear |
EN ISO 23910:2017 | Leather - Physical and mechanical tests - Measurement of stitch tear resistance (ISO 23910:2017) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.