I.S. EN 14803:2006
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
IDENTIFICATION AND/OR DETERMINATION OF THE QUANTITY OF WASTE
Hardcopy , PDF
03-07-2020
English
01-01-2006
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
4.1 General requirements on safety and health
4.2 Data carriers
4.3 Sensing devices
4.4 On Board Computer (OBC)
4.5 Data processing centre (DPC)
4.6 Data structure and transfer
4.7 Integrity of data
Annex A (normative) Positions of transponders on waste
containers to be handled by the comb
lifting device with identification
Annex B (normative) Positions of optical data carriers (dot
code/bar code labels) on waste containers
Annex C (informative) Recommended positions of transponders
on waste containers to be handled by
lifting devices other than the comb
lifting device defined in A.2
Annex D (normative) Integration of systems for ID and DQW on
lifting devices - requirements
Annex E (normative) Application and registration procedures
for manufacturers/suppliers
Bibliography
Specifies general requirements and verifications for methods of identification of waste containers and/or determination of the quantity of waste including: - safety requirements; - interface requirements and performances; - data to be treated and their integrity.
| DocumentType |
Standard
|
| Pages |
33
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| ONORM EN 14803 : 2006 | Identical |
| UNE-EN 14803:2007 | Identical |
| NEN EN 14803 : 2006 | Identical |
| NS EN 14803 : 1ED 2006 | Identical |
| UNI EN 14803 : 2006 | Identical |
| EN 14803:2006 | Identical |
| SN EN 14803 : 2006 | Identical |
| NF EN 14803 : 2006 | Identical |
| BS EN 14803:2006 | Identical |
| NBN EN 14803 : 2006 | Identical |
| DIN EN 14803:2006-05 | Identical |
| EN 45501 : 2015 | METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS |
| EN 840-4:2012 | Mobile waste and recycling containers - Part 4: Containers with 4 wheels with a capacity up to 1 700 l with flat lid(s), for wide trunnion or BG- and/or wide comb lifting devices - Dimensions and design |
| IEC 60068-2-27:2008 | Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
| EN 840-3:2012 | Mobile waste and recycling containers - Part 3: Containers with 4 wheels with a capacity up to 1 300 l with dome lid(s), for trunnion and/or comb lifting devices - Dimensions and design |
| EN 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
| ISO 7250:1996 | Basic human body measurements for technological design |
| EN 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| EN 45501:2015 | METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS |
| IEC 60068-2-38:2009 | Environmental testing - Part 2-38: Tests - Test Z/AD: Composite temperature/humidity cyclic test |
| EN 840-1:2012 | Mobile waste and recycling containers - Part 1: Containers with 2 wheels with a capacity up to 400 l for comb lifting devices - Dimensions and design |
| EN 60068-2-27:2009 | Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
| EN 60068-2-38:2009 | Environmental testing - Part 2-38: Tests - Test Z/AD: Composite temperature/humidity cyclic test |
| IEC 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
| EN 60068-2-6:2008 | Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal) |
| EN ISO 7250 : 1997 | BASIC HUMAN BODY MEASUREMENTS FOR TECHNOLOGICAL DESIGN |
| EN 840-2:2012 | Mobile waste and recycling containers - Part 2: Containers with 4 wheels with a capacity up to 1 300 l with flat lid(s), for trunnion and/or comb lifting devices - Dimensions and design |
| EN 1556:1998 | Bar coding - Terminology |
| IEC 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
| 1998/37/EC : 1998 | DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY |
| ISO 11784:1996 | Radio frequency identification of animals Code structure |
| EN 840-5:2012 | Mobile waste and recycling containers - Part 5: Performance requirements and test methods |
| EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
| EN 840-6:2012 | Mobile waste and recycling containers - Part 6: Safety and health requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.