I.S. EN 14566:2008
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
MECHANICAL FASTENERS FOR GYPSUM PLASTERBOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
15-09-2009
07-03-2008
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Test methods
6 Evaluation of conformity
7 Designation
8 Marking, labelling and packaging
Annex A (informative) - Examples of fixing types
Annex B (informative) - Sampling procedure for testing
Annex ZA (informative) - Clauses of this European Standard
addressing the provisions of the EU
Construction Products Directive
Bibliography
Describes the characteristics and performance of mechanical fasteners, including nails, screws and staples, intended to be used for the fixing of gypsum plasterboard, gypsum boards with fibrous reinforcement, products from secondary processing and suitable ancillary products, to timber and metal, as appropriate, in building construction works.
| DevelopmentNote |
2008 Edition Re-Issued in September 2009 & incorporates AMD 1 2009. (09/2009)
|
| DocumentType |
Standard
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| NBN EN 14566 : 2008 + A1 2009 | Identical |
| NEN EN 14566 : 2008 + A1 2009 | Identical |
| UNI EN 14566 : 2009 | Identical |
| NF EN 14566 : 2008 + A1 2009 | Identical |
| BS EN 14566 : 2008 | Identical |
| DIN EN 14566:2009-10 | Identical |
| EN 14566:2008+A1:2009 | Identical |
| I.S. 440:2009 | TIMBER FRAME DWELLINGS |
| EN 520:2004+A1:2009 | Gypsum plasterboards - Definitions, requirements and test methods |
| EN ISO 6508-1:2016 | Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016) |
| EN 13915:2017 | Prefabricated gypsum plasterboard panels with a cellular paperboard core - Definitions, requirements and test methods |
| EN 14209:2017 | Preformed plasterboard cornices - Definitions, requirements and test methods |
| ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
| EN 13950:2014 | Gypsum board thermal/acoustic insulation composite panels - Definitions, requirements and test methods |
| EN 14496:2017 | Gypsum based adhesives for thermal/acoustic insulation composite panels and gypsum boards - Definitions, requirements and test methods |
| EN ISO 9227:2017 | Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017) |
| ISO 12777-2:2000 | Methods of test for pallet joints — Part 2: Determination of withdrawal and head pull-through resistance of pallet nails and staples |
| EN 10327:2004 | Continuously hot-dip coated strip and sheet of low carbon steels for cold forming - Technical delivery conditions |
| EN 15283-2:2008+A1:2009 | Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 2: Gypsum fibre boards |
| EN 15283-1:2008+A1:2009 | Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 1: Gypsum boards with mat reinforcement |
| EN 10143:2006 | Continuously hot-dip coated steel sheet and strip - Tolerances on dimensions and shape |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN 10230-1:1999 | Steel wire nails - Part 1: Loose nails for general applications |
| EN 338:2016 | Structural timber - Strength classes |
| ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
| EN 10084:2008 | Case hardening steels - Technical delivery conditions |
| EN ISO 12777-2:2000 | Methods of test for pallet joints - Part 2: Determination of withdrawal and head pull-through resistance of pallet nails and staples (ISO 12777-2:2000) |
| ISO 12777-3:2002 | Methods of test for pallet joints — Part 3: Determination of strength of pallet joints |
| EN ISO 12777-3:2002 | Methods of test for pallet joints - Part 3: Determination of strength of pallet joints (ISO 12777-3:2002) |
| EN 13963:2014 | Jointing materials for gypsum boards - Definitions, requirements and test methods |
| EN 14195:2014 | Metal framing components for gypsum board systems - Definitions, requirements and test methods |
| EN 14353:2017 | Metal beads and feature profiles for use with gypsum plasterboards - Definitions, requirements and test methods |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.