I.S. EN 14286:2008
Current
The latest, up-to-date edition.
ALUMINIUM AND ALUMINIUM ALLOYS - WELDABLE ROLLED PRODUCTS FOR TANKS FOR THE STORAGE AND TRANSPORTATION OF DANGEROUS GOODS
Hardcopy , PDF
English
01-01-2008
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Selection of materials
5 Designation of the products
6 Ordering information
7 Requirements
7.1 General
7.2 Technical conditions for inspection and delivery
7.3 Mechanical properties
7.4 Surface conditions
7.5 Tolerances on dimensions and form
8 Inspection
8.1 Inspections to be carried out
8.2 Type and content of inspection documents
9 Quality assurance
10 Marking
Annex A (informative) Explanation of temper designations
used in Table 1 based on definitions of EN 515
Bibliography
Provides the technical conditions of inspection and delivery, the mechanical properties, the tolerances on dimensions and form of rolled semi-finished aluminium alloy products intended for tanks for the storage and transportation of dangerous goods, in particular of gasoline and other liquid hydrocarbons.
| DocumentType |
Standard
|
| Pages |
14
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| UNI EN 14286 : 2008 | Identical |
| UNE-EN 14286:2009 | Identical |
| NEN EN 14286 : 2008 | Identical |
| NS EN 14286 : 3ED 2008 | Identical |
| SN EN 14286 : 2008 | Identical |
| EN 14286:2008 | Identical |
| NBN EN 14286 : 2009 | Identical |
| NF EN 14286 : 2008 | Identical |
| BS EN 14286:2008 | Identical |
| DIN EN 14286:2008-11 | Identical |
| EN 10002-1 : 2001 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE |
| ASTM G 67 : 2013 | Standard Test Method for Determining the Susceptibility to Intergranular Corrosion of 5XXX Series Aluminum Alloys by Mass Loss After Exposure to Nitric Acid (NAMLT Test) |
| EN 485-3:2003 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 3: Tolerances on dimensions and form for hot-rolled products |
| EN 485-2:2016 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties |
| EN 485-4:1993 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 4: Tolerances on shape and dimensions for cold-rolled products |
| ISO 7438:2016 | Metallic materials Bend test |
| EN 12258-1:2012 | Aluminium and aluminium alloys - Terms and definitions - Part 1: General terms |
| ASTM G 66 : 1999 | Standard Test Method for Visual Assessment of Exfoliation Corrosion Susceptibility of 5XXX Series Aluminum Alloys (ASSET Test) |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 515:2017 | Aluminium and aluminium alloys - Wrought products - Temper designations |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| ISO 9001:2015 | Quality management systems — Requirements |
| ASTM B 928/B928M : 2015 : REDLINE | Standard Specification for High Magnesium Aluminum-Alloy Products for Marine Service and Similar Environments |
| EN 573-3:2013 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products |
| EN ISO 7438:2016 | Metallic materials - Bend test (ISO 7438:2016) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.