I.S. EN 13126-6:2008
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOORS HEIGHT WINDOWS - PART 6: VARIABLE GEOMETRY STAY HINGES (WITH OR WITHOUT A FRICTION STAY)
Hardcopy , PDF
03-10-2018
English
01-01-2008
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Classification
4.1 General
4.2 Category of use (1 - first digit)
4.3 Durability (2 - second digit)
4.4 Mass (3 - third digit)
4.5 Fire resistance (4 - fourth digit)
4.6 Safety in use (5 - fifth digit)
4.7 Corrosion resistance (6 - sixth digit)
4.8 Security (7 - seventh digit)
4.9 Application (8 - eighth digit)
4.10 Test sizes - size limitations (9 - ninth digit)
4.11 Example of classification for variable geometry stay
hinges (with or without a friction system - EN 13126-6)
5 Requirements
5.1 General
5.2 Integrated restrictors
5.3 Additional requirements
5.3.1 Pull-in and pull-in abuse test
5.3.2 Friction test (where applicable)
5.3.3 Obstructed track test
5.3.4 Ease of sash movement test
5.3.5 Durability test
5.3.6 Durability pull-in test
5.3.7 Simulated negative pressure test
5.3.8 Static load test
5.3.9 Additional load test
6 Test apparatus
6.1 General
6.2 Assembly
6.2.1 General
6.2.2 Fixing
6.3 Additional equipment
6.3.1 Block for pull-in abuse test
6.3.2 Steel cross for simulated negative pressure test
7 Test methods
7.1 Samples
7.2 Pull-in test
7.2.1 General
7.2.2 Pull-in test procedure
7.3 Friction test
7.3.1 General
7.3.2 Friction test
7.4 Obstructed track test procedure
7.5 Pull-in abuse test
7.6 Ease of sash movement test procedure
7.7 Durability test
7.7.1 General
7.7.2 Durability pull-in test procedure
7.8 Simulated negative pressure test
7.9 Static load test procedure
7.10 Additional load test procedure
7.11 Corrosion resistance
Annex A (normative) Types of variable geometry stay hinges
(with or without a friction system)
Annex B (informative) Test method diagrams
Annex C (normative) Flow chart of test procedures
Describes requirements and test methods for durability, strength, security and function of mechanically operated variable geometry stay hinges (with or without a friction system).
| DevelopmentNote |
Supersedes I.S. TS 13126-6. (01/2009)
|
| DocumentType |
Standard
|
| Pages |
27
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| EN 13126-6:2008 | Identical |
| EN 12519:2004 | Windows and pedestrian doors - Terminology |
| CEN/TS 13126-5:2004 | Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 5: Devices that restrict the opening of windows |
| ISO 4520:1981 | Chromate conversion coatings on electroplated zinc and cadmium coatings |
| EN 13126-1:2011 | Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 1: Requirements common to all types of hardware |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.