I.S. EN 1279-2:2002
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
GLASS IN BUILDING - INSULATING GLASS UNITS - PART 2: LONG TERM TEST METHOD AND REQUIREMENTS FOR MOISTURE PENETRATION
Hardcopy , PDF
14-08-2016
English
01-01-2002
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions, abbreviations and symbols
3.1 Terms and definitions
3.2 Abbreviations
3.3 Symbols
4 Requirements
4.1 Moisture penetration index
4.2 Edge seal strength
4.3 Gas leakage rate
5 Method of test
5.1 Principle
5.2 Climate conditions in cabinet
5.3 Number, description and selection of the test
specimens
5.4 Procedure
6 Methods of measurement
6.1 Measurement of dew point temperature
6.2 Measurement of moisture content
6.2.1 General
6.2.2 Moisture content of desiccant in bulk
6.2.3 Moisture content of desiccant incorporated
in organic spacer
6.2.4 Moisture content in insulating glass units
without desiccant
7 Test report
Annex A (normative) - Reference method for dew point
temperature measurement
A.1 General
A.2 Apparatus and materials
A.3 Procedure
Annex B (normative) - Moisture content measurement
according to the 950 degree C drying method
B.1 Applicability
B.2 Apparatus, materials and preparatory work
B.3 Initial and final moisture content
B.4 Standard moisture adsorption capacity
Annex C (normative) - Moisture content measurement
according to the Karl Fischer method
C.1 Applicability
C.2 Apparatus, materials and preparatory work
C.3 Initial and final moisture content
C.4 Standard moisture adsorption capacity
Annex D (normative) - Establishing the standard moisture
adsorption capacity of desiccants
D.1 General
D.2 Appropriate information
D.3 Generally accepted values for desiccant in bulk
D.4 Desiccant manufacturing
Bibliography
Specifies requirements for moisture penetration and the long term test method for insulating glass units and ensures by means of an adequate evaluation of conformity to this standard that over time: - energy savings are made because the U-value and solar factor do not change significantly; - health is preserved because sound reduction and vision do not change significantly; - safety is provided because mechanical resistance does not change significantly.
| DevelopmentNote |
Supersedes I.S. 330. (08/2016)
|
| DocumentType |
Standard
|
| Pages |
31
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| DIN EN 1279-2:2015-08 (Draft) | Identical |
| UNE-EN 1279-2:2003 | Identical |
| SN EN 1279-2 : 2002 | Identical |
| NEN EN 1279-2 : 2002 | Identical |
| NF EN 1279-2 : 2003 | Identical |
| NS EN 1279-2 : 1ED 2003 | Identical |
| BS EN 1279-2:2002 | Identical |
| UNI EN 1279-2 : 2004 | Identical |
| NBN EN 1279-2 : 2003 | Identical |
| ONORM EN 1279-2 : 2003 | Identical |
| EN 1279-2:2002 | Identical |
| PREN 1279-1 : DRAFT 95 | GLASS IN BUILDING - INSULATING GLASS UNITS - PART 1: GENERALITIES AND DIMENSIONAL TOLERANCES |
| EN 1279-6:2002 | Glass in building - Insulating glass units - Part 6: Factory production control and periodic tests |
| EN 572-2:2012 | Glass in building - Basic soda lime silicate glass products - Part 2: Float glass |
| EN 1279-3:2002 | Glass in building - Insulating glass units - Part 3: Long term test method and requirements for gas leakage rate and for gas concentration tolerances |
| EN 1279-4:2002 | Glass in building - Insulating glass units - Part 4: Methods of test for the physical attributes of edge seals |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 572-1:2012+A1:2016 | Glass in building - Basic soda-lime silicate glass products - Part 1: Definitions and general physical and mechanical properties |
| ISO 760:1978 | Determination of water Karl Fischer method (General method) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.