I.S. EN 12186:2014
Current
The latest, up-to-date edition.
GAS INFRASTRUCTURE - GAS PRESSURE REGULATING STATIONS FOR TRANSMISSION AND DISTRIBUTION - FUNCTIONAL REQUIREMENTS
Hardcopy , PDF
English
01-01-2014
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Foreword
1 Scope
2 Normative references
3 Terms, definitions, symbols and abbreviations
4 Quality and management system
5 Environmental impact
6 Layout of the gas pressure regulating station
7 Housings
8 Design of the station
9 Pressure control
10 Testing
11 Commissioning
12 Operation and maintenance
13 Decommissioning and disposal
Annex A (informative) - Glossary
Annex B (informative) - Significant technical changes
between this European Standard and the previous
edition
Bibliography
Covers the relevant functional requirements for gas pressure regulating stations, which form part of gas transmission or distribution systems. Applies to the design, materials, construction, testing, operation and maintenance of gas pressure regulating stations.
DevelopmentNote |
Supersedes I.S. 821. (11/2017)
|
DocumentType |
Standard
|
Pages |
40
|
PublisherName |
National Standards Authority of Ireland
|
Status |
Current
|
Supersedes |
Standards | Relationship |
BS EN 12186:2014 | Identical |
NS EN 12186 : 2014 | Identical |
NF EN 12186 : 2014 | Identical |
UNE-EN 12186:2015 | Identical |
NEN EN 12186 : 2014 | Identical |
NBN EN 12186 : 2014 | Identical |
SN EN 12186:2014 | Identical |
EN 12186:2014 | Identical |
DIN EN 12186:2014-12 | Identical |
UNI EN 12186 : 2014 | Identical |
I.S. 821:2006 | GAS PRESSURE REGULATING STATIONS FOR DISTRIBUTION |
I.S. 822:2007 | GAS PRESSURE REGULATING INSTALLATIONS ON SERVICE PIPELINES |
I.S. 328:2015/AC1:2015 | GAS TRANSMISSION PIPELINES AND PIPELINE INSTALLATIONS (EDITION 4) |
I.S. 329:2015 | GAS DISTRIBUTION MAINS (EDITION 3) |
I.S. 328:2015 | GAS TRANSMISSION PIPELINES AND PIPELINE INSTALLATIONS (EDITION 4) |
EN 12732:2013+A1:2014 | Gas infrastructure - Welding steel pipework - Functional requirements |
EN 1127-1:2011 | Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology |
EN 12327:2012 | Gas infrastructure - Pressure testing, commissioning and decommissioning procedures - Functional requirements |
EN 15001-1:2009 | Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
EN 1775:2007 | Gas supply - Gas pipework for buildings - Maximum operating pressure less than or equal to 5 bar - Functional recommendations |
EN 60079-10-1:2015 | Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres |
EN 62305-4:2011/AC:2016 | PROTECTION AGAINST LIGHTNING - PART 4: ELECTRICAL AND ELECTRONIC SYSTEMS WITHIN STRUCTURES (IEC 62305-4:2010) |
EN 12007-1:2012 | Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 1: General functional requirements |
EN 13463-1:2009 | Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements |
EN 1594:2013 | Gas infrastructure - Pipelines for maximum operating pressure over 16 bar - Functional requirements |
EN 62305-4:2011/AC:2016-11 | Protection against lightning - Part 4: Electrical and electronic systems within structures |
CEN/TS 15399:2007 | Gas Supply Systems - Guidelines for Management systems for Gas Distribution Network |
EN 62305-3:2011 | Protection against lightning - Part 3: Physical damage to structures and life hazard |
ISO 1400:1975 | Vulcanized rubbers of high hardness (85 to 100 IRHD) Determination of hardness |
EN 437:2003+A1:2009 | Test gases - Test pressures - Appliance categories |
EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
EN 334:2005+A1:2009 | Gas pressure regulators for inlet pressures up to 100 bar |
ISO 14001:2015 | Environmental management systems — Requirements with guidance for use |
CEN/TR 13737-1:2012 | Implementation Guide for functional standards prepared by CEN/TC 234 Gas infrastructure - Part 1: General |
EN 10204:2004 | Metallic products - Types of inspection documents |
EN 62305-2:2012 | Protection against lightning - Part 2: Risk management |
IEC 60079-14:2013 | Explosive atmospheres - Part 14: Electrical installations design, selection and erection |
EN ISO 14001:2015 | Environmental management systems - Requirements with guidance for use (ISO 14001:2015) |
EN 60079-14:2014/AC:2016 | EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION (IEC 60079-14:2013/COR1:2016) |
CEN/TR 16388:2012 | Gas-Specific Environmental Document - Guideline for incorporating within standards to minimize the environmental impact of gas infrastructure across the whole life cycle |
CEN/TR 13737-2:2014 | Gas infrastructure - Implementation Guide for Functional Standards prepared by CEN/TC 234 - Part 2: National Pages related to CEN/TC 234 standards |
ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
EN 16348:2013 | Gas infrastructure - Safety Management System (SMS) for gas transmission infrastructure and Pipeline Integrity Management System (PIMS) for gas transmission pipelines - Functional requirements |
EN 1081:1998 | Resilient floor coverings - Determination of the electrical resistance |
EN ISO 9000:2015 | Quality management systems - Fundamentals and vocabulary (ISO 9000:2015) |
EN 1776:2015 | Gas infrastructure - Gas measuring systems - Functional requirements |
1997/23/EC : 1997 | DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.