I.S. EN 12094-5:2006
Current
The latest, up-to-date edition.
FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 5: REQUIREMENTS AND TEST METHODS FOR HIGH AND LOW PRESSURE SELECTOR VALVES AND THEIR ACTUATORS
Hardcopy , PDF
English
01-01-2006
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
4.1 General design
4.2 Connection threads and flanges
4.3 Function and ambient temperatures
4.4 Resistance to internal pressure and leakage
4.5 Resistance to bursting
4.6 Operational reliability
4.7 Flow characteristics
4.8 Resistance to corrosion
4.9 Resistance to stress corrosion
4.10 Vibration resistance
4.11 Operating force
4.12 Documentation
5 Type test methods
5.1 Conditions
5.2 Samples and order of tests
5.3 Compliance
5.4 Test for function
5.5 Test for resistance to internal pressure and
leakage
5.6 Test for resistance to bursting
5.7 Test for operational reliability
5.8 Test for operation under temperature conditions
5.9 Test for flow characteristic data
5.10 Test for resistance to corrosion
5.11 Test for resistance to stress corrosion
5.12 Vibration test
5.13 Test for operating force
6 Marking
7 Evaluation of conformity
7.1 General
7.2 Initial type testing
7.3 Factory production control (FPC)
Annex ZA (informative) - Clauses of this European
Standard addressing the provisions of the EU
Construction Products Directive
ZA.1 Scope and relevant characteristics
ZA.2 Procedure for the attestation of conformity
of selector valves and their actuators
ZA.3 CE Marking and labelling
Bibliography
Provides requirements and explains test methods for selector values and their actuators used in CO[2]-, Inert Gas- or Halocarbon gas fire extinguishing systems.
| DocumentType |
Standard
|
| Pages |
31
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NEN EN 12094-5 : 2006 | Identical |
| SN EN 12094-5 : 2006 | Identical |
| NS EN 12094-5 : 2ED 2006 | Identical |
| UNE-EN 12094-5:2007 | Identical |
| NF EN 12094-5 : 2006 | Identical |
| EN 12094-5:2006 | Identical |
| NBN EN 12094-5 : 2006 | Identical |
| UNI EN 12094-5 : 2006 | Identical |
| BS EN 12094-5:2006 | Identical |
| DIN EN 12094-5:2006-07 | Identical |
| 93/68/EEC : 1993 AMD 2 1998 | COUNCIL DIRECTIVE 93/68/EEC OF 22.7.93 AMENDING DIRECTIVES 87/404/EEC, 88/378/EEC, 89/106/EEC, 89/336/EEC, 89/392/EEC, 89/686/EEC, 90/384/EEC, 90/385/EEC, 90/396/EEC, 91/263/EEC, 92/42/EEC AND 73/23/EEC |
| ISO 7005-2:1988 | Metallic flanges — Part 2: Cast iron flanges |
| EN 45011:1998 | General requirements for bodies operating product certification systems (ISO/IEC Guide 65:1996) |
| ISO 7005-3:1988 | Metallic flanges Part 3: Copper alloy and composite flanges |
| EN 45011 : 1998 | GENERAL REQUIREMENTS FOR BODIES OPERATING PRODUCT CERTIFICATION SYSTEMS |
| EN ISO 228-1:2003 | Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000) |
| EN 1092-4:2002 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 4: Aluminium alloy flanges |
| ISO 7-1:1994 | Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 60068-2-6:2008 | Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal) |
| ISO 7005-1:2011 | Pipe flanges — Part 1: Steel flanges for industrial and general service piping systems |
| EN 1092-2:1997 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 2: Cast iron flanges |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.