I.S. EN 10343:2009
Current
The latest, up-to-date edition.
STEELS FOR QUENCHING AND TEMPERING FOR CONSTRUCTION PURPOSES - TECHNICAL DELIVERY CONDITIONS
Hardcopy , PDF
English
01-01-2009
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Classification and designation
5 Designation to be used on ordering
6 Manufacturing process
7 Requirements
8 Inspection
9 Evaluation of conformity
10 Preparation of samples and test pieces
11 Testing on compliance criteria
12 Marking, labelling, packaging
Annex A (normative) - Ruling sections for the mechanical
properties
A.1 Terms and Definitions
A.2 Determination of the diameter of the equivalent
ruling section
Annex B (normative) - Dimensional standards applicable to
products complying with this
European Standard
Annex ZA (informative) - Relationship between this European
Standard and the Essential
Requirements of EU Directive 89/106/EEC,
EU Construction Products Directive
ZA.1 Scope and relevant characteristics
ZA.2 Procedures for the attestation of conformity of
structural metallic construction products
ZA.3 CE marking and labelling
Describes the technical delivery requirements for the following steel products intended for use in the construction industry: - bars (including hammer-forged bars); - wide flats; - hot-rolled strip and sheet/plate; - forgings.
| DocumentType |
Standard
|
| Pages |
36
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Standards | Relationship |
| EN 10343:2009 | Identical |
| EN ISO 14284:2002 | Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996) |
| EN 10002-1 : 2001 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE |
| EN 10052:1993 | Vocabulary of heat treatment terms for ferrous products |
| EN 10048:1996 | Hot rolled narrow steel strip - Tolerances on dimensions and shape |
| EN 10051:2010 | Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels - Tolerances on dimensions and shape |
| EN 10079:2007 | Definition of steel products |
| EN 10027-2:2015 | Designation systems for steels - Part 2: Numerical system |
| CEN/TR 10261:2013 | Iron and steel - European standards for the determination of chemical composition |
| EN 10221:1995 | Surface quality classes for hot-rolled bars and rods - Technical delivery conditions |
| EN 10029:2010 | Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape |
| EN ISO 377:2017 | Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017) |
| EN ISO 643:2012 | Steels - Micrographic determination of the apparent grain size (ISO 643:2012) |
| EN 10045-1 : 1990 | METALLIC MATERIALS - CHARPY IMPACT TEST - PART 1: TEST METHOD |
| EN 10308:2001 | Non destructive testing - Ultrasonic testing of steel bars |
| EN 10163-2:2004 | Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 2: Plate and wide flats |
| EN 10060:2003 | Hot rolled round steel bars for general purposes - Dimensions and tolerances on shape and dimensions |
| ISO 3887:2003 | Steels Determination of depth of decarburization |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 10021:2006 | General technical delivery conditions for steel products |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 643:2012 | Steels Micrographic determination of the apparent grain size |
| EN 10083-1:2006 | Steels for quenching and tempering - Part 1: General technical delivery conditions |
| EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
| EN 10083-2:2006 | Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels |
| EN 10020:2000 | Definition and classification of grades of steel |
| EN 10061:2003 | Hot rolled hexagon steel bars for general purposes - Dimensions and tolerances on shape and dimensions |
| EN 10059:2003 | Hot rolled square steel bars for general purposes - Dimensions and tolerances on shape and dimensions |
| EN 10160:1999 | Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method) |
| ISO 377:2017 | Steel and steel products — Location and preparation of samples and test pieces for mechanical testing |
| ISO 14284:1996 | Steel and iron — Sampling and preparation of samples for the determination of chemical composition |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.