I.S. 325-2:1995
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
CODE OF PRACTICE FOR USE OF MASONRY - PART 2: MASONRY CONSTRUCTION
Hardcopy , PDF
31-03-2010
English
01-01-1995
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Preface
Declaration
Section one - General
1 Scope
2 Definitions
Section two - Materials and components
3 Masonry units
4 Mortars
5 Wall ties
6 Anchorages, dowels and fixings
7 Reinforcement
8 Damp-proof courses
9 Sealants
10 Airbricks, gratings and flues
11 Sills
12 Lintels
13 Copings and cappings
14 Flashings and weatherings and insulation in cavity
walls
Section three - Design
15 General design considerations
16 Design for stability
17 Structural detailing for stability
18 Movement in masonry
19 Exclusion of moisture
20 Durability
21 Mortars and renders
22 Fire resistance of walls
23 Thermal properties
24 Sound absorption and noise reduction
25 Masonry bonds and other constructional details
Section four - Workmanship
26 General
27 Setting out of masonry construction
28 Storage of materials on site
29 Batching, mixing and use of mortars
30 Laying of masonry units
31 Construction details
32 Provision of services, including fixings and chases
33 Protection against damage during construction
34 Supervision
Appendices
A Determination of movement in masonry
B Masonry bonds and joint finishes
C Structural design procedure for wall ties
D Use of replacement wall ties
E Durability designations of bricks
Tables
Figures
References
Index
Covers general recommendations for the design and construction of block and brick masonry, including materials and components, and the workmanship aspects of masonry construction.
| DocumentType |
Standard
|
| Pages |
142
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy |
| I.S. 444:1998 | THE USE OF STRUCTURAL TIMBER IN BUILDINGS |
| BS 476-23:1987 | Fire tests on building materials and structures Methods for determination of the contribution of components to the fire resistance of a structure |
| BS 5493:1977 | Code of practice for protective coating of iron and steel structures against corrosion |
| DIN 18540:2014-09 | SEALING OF EXTERIOR WALL JOINTS IN BUILDING USING JOINT SEALANTS |
| BS 5977-2:1983 | Lintels Specification for prefabricated lintels |
| BS 8000-3:1989 | Workmanship on building sites Code of practice for masonry |
| BS 6213:1982 | Guide to selection of constructional sealants |
| BS 4841-2:1975 | Rigid polyurethane (PUR) and polyisocyanurate (PIR) foam for building applications Laminated board for use as a wall and ceiling insulation |
| BS 6676-2:1986 | Thermal insulation of cavity walls using man-made mineral fibre batts (slabs) Code of practice for installation of batts (slabs) filling the cavity |
| BS 8004:1986 | Code of practice for foundations |
| I.S. ISO 1791:1988 | BUILDING CONSTRUCTION - MODULAR COORDINATION VOCABULARY |
| I.S. EN 10143:2006 | CONTINUOUSLY HOT-DIP COATED STEEL SHEET AND STRIP - TOLERANCES ON DIMENSIONS AND SHAPE |
| BS CP102(1973) : 1973 | CODE OF PRACTICE FOR PROTECTION OF BUILDINGS AGAINST WATER FROM THE GROUND |
| ISO 6707-1:2017 | Buildings and civil engineering works Vocabulary Part 1: General terms |
| BS 493:1970 | Specification for airbricks and gratings for wall ventilation |
| I.S. 325-1:1986 | CODE OF PRACTICE FOR USE OF MASONRY - PART 1: STRUCTURAL USE OF UNREINFORCED MASONRY |
| I.S. 268:1987 | METAL WALL TIES FOR MASONRY WALLS |
| I.S. 189:1974 | CONCRETE BUILDING BRICKS |
| BS 849:1939 | Code of practice for plain sheet zinc roofing |
| BS 6093:1981 | Code of practice for design of joints and jointing in building construction |
| BS 5390:1976 | Code of practice for stone masonry |
| BS 6232-2:1982 | Thermal insulation of cavity walls by filling with blown man-made mineral fibre Code of practice for installation of blown man-made mineral fibre in cavity walls with masonry and/or concrete leaves |
| I.S. EN 10113-2:1993 | HOT-ROLLED PRODUCTS IN WELDABLE FINE GRAIN STRUCTURAL STEELS PART 2: DELIVERY CONDITIONS FOR NORMALIZED/NORMALIZED ROLLED STEELS |
| BS 6017:1981 | Specification for copper refinery shapes |
| BS 1199 & 1200(1976) : 1976 AMD 5126 | SPECIFICATIONS FOR BUILDING SANDS FROM NATURAL SOURCES |
| I.S. ISO 1803/2:1988 | BUILDING CONSTRUCTION - TOLERANCES - VOCABULARY - PART 2: DERIVED TERMS |
| BS 3111-2:1979 | Steel for cold forged fasteners and similar components Stainless steel |
| I.S. 260:1984 | MINERAL FIBRE MATS FOR THERMAL INSULATION OF BUILDINGS |
| BS 5642-1(1978) : 1978 | SILLS, COPINGS AND CAPPINGS - PART 1: SPECIFICATION FOR WINDOW SILLS OF PRECAST CONCRETE, CAST STONE, CLAYWARE, SLATE AND NATURAL STONE |
| I.S. 20-1:1987 | CONCRETE BUILDING BLOCKS - PART 1: NORMAL DENSITY BLOCKS |
| I.S. EN 10113-1:1993 | HOT-ROLLED PRODUCTS IN WELDABLE FINE GRAIN STRUCTURAL STEELS PART 1: GENERAL DELIVERY CONDITIONS |
| BS 8301:1985 | Code of practice for building drainage |
| I.S. 91:1983 | CLAY BUILDING BRICKS |
| I.S. 57-1:1987 | DAMP-PROOF COURSES - PART 1: BITUMEN DAMP-PROOF COURSES |
| BS 6461-1:1984 | Installation of chimneys and flues for domestic appliances burning solid fuel (including wood and peat) Code of practice for masonry chimneys and flue pipes |
| BS 5617:1985 | Specification for urea-formaldehyde (UF) foam systems suitable for thermal insulation of cavity walls with masonry or concrete inner and outer leaves |
| BS 6180:1982 | Code of practice for protective barriers in and about buildings |
| BS 3837:1977 | Specification for expanded polystyrene boards |
| BS 476-20:1987 | Fire tests on building materials and structures Method for determination of the fire resistance of elements of construction (general principles) |
| I.S. 240:1980 | PRE-CAST PRESTRESSED CONCRETE UNITS FOR USE IN COMPOSITE LINTELS |
| I.S. ISO 2444:1988 | JOINTS IN BUILDINGS - VOCABULARY |
| BS 5810:1979 | Code of practice for access for the disabled to buildings |
| BS 476-21:1987 | Fire tests on building materials and structures Methods for determination of the fire resistance of loadbearing elements of construction |
| BS 2873:1969 | Specification for copper and copper alloys. Wire |
| BS DD93(1984) : 1984 | METHODS FOR ASSESSING EXPOSURE TO WIND-DRIVEN RAIN |
| I.S. 326-2-2:1995 | CONCRETE - PART 2-2: METHODS FOR SPECIFYING CONCRETE MIXES |
| I.S. 326-2-1:1995 | CONCRETE - PART 2-1: GUIDE TO SPECIFYING CONCRETE |
| I.S. 190:1974 | CALCIUM SILICATE BUILDING BRICKS |
| BS 402-1:1990 | Clay roofing tiles and fittings Specification for plain tiles and fittings |
| I.S. 3:1972 | CONCRETE ROOFING TILES |
| I.S. 51:2001 | CLAY FLUE LININGS AND FLUE TERMINALS |
| I.S. 326-2-4:1995 | CONCRETE - PART 2-4: SPECIFICATION FOR THE PROCEDURES TO BE USED IN SAMPLING, TESTING AND ASSESSING COMPLIANCE OF CONCRETE |
| BS 1881-5:1970 | Testing concrete Methods of testing hardened concrete for other than strength |
| I.S. 89-1:1981 | WINDOW SILLS |
| I.S. 406:1987 | MASONRY MORTARS |
| BS 6399-1:1984 | Loading for buildings Code of practice for dead and imposed loads |
| BS 5642-2(1983) : 1983 | SILLS, COPINGS AND CAPPINGS - PART 2: SPECIFICATION FOR COPINGS AND CAPPINGS OF PRECAST CONCRETE, CAST STONE, CLAYWARE, SLATE AND NATURAL STONE |
| I.S. 193:2006 | TIMBER TRUSSES FOR ROOFS |
| BS 743:1970 | Specification for materials for damp-proof courses |
| BS 6510:1984 | Specification for steel windows, sills, window boards and doors |
| I.S. 326-2-3:1995 | CONCRETE - PART 2-3: SPECIFICATION FOR THE PROCEDURES TO BE USED IN PRODUCING AND TRANSPORTING CONCRETE |
| BS 6676-1:1986 | Thermal insulation of cavity walls using man-made mineral fibre batts (slabs) Specification for man-made mineral fibre batts (slabs) |
| BS 5628-2:1985 | Code of practice for use of masonry Structural use of reinforced and prestressed masonry |
| S.R. 11:1988 | STRUCTURAL TIMBER FOR DOMESTIC CONSTRUCTION |
| I.S. ISO 1803/1:1988 | BUILDING CONSTRUCTION - TOLERANCES - VOCABULARY - PART 1: GENERAL TERMS |
| I.S. EN 10113-3:1993 | HOT-ROLLED PRODUCTS IN WELDABLE FINE GRAIN STRUCTURAL STEELS PART 3: DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED STEELS |
| BS 5618:1985 | Code of practice for thermal insulation of cavity walls (with masonry or concrete inner and outer leaves) by filling with urea-formaldehyde (UF) foam systems |
| BS 6750:1986 | Specification for modular coordination in building |
| BS 6270-1:1982 | Code of practice for cleaning and surface repair of buildings Natural stone, cast stone and clay and calcium silicate brick masonry |
| I.S. 57-2:1987 | DAMP-PROOF COURSES - PART 2: POLYETHYLENE DAMP-PROOF COURSES |
| BS 476-22:1987 | Fire tests on building materials and structures Method for determination of the fire resistance of non-loadbearing elements of construction |
| I.S. 65:1973 | MASTIC ASPHALT FOR BUILDING |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.