FED-STD-141 Revision D:2001
Current
Current
The latest, up-to-date edition.
Paint, Varnish, Lacquer and Related Materials: Methods of Inspection, Sampling and Testing
Available format(s)
PDF
Language(s)
English
Published date
22-03-2001
Publisher
£14.68
Excluding VAT
Gives methods to determine physical and chemical properties of paint, varnish, lacquer and related materials to evaluate their conformance to federal and military specifications. Includes inspection, sampling and testing procedures.
| DocumentType |
Standard
|
| Pages |
61
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
This standard elaborates the methods used to determine the physical and chemical properties of paint, varnish, lacquer, and related materials. The purpose of this standard is to establish standardized testing methodologies and to eliminate unnecessary or undesirable variations in test results when evaluating a product¿s adherence to specification requirements. If any variation or modification of the methods established in this standard is required by any specification, the procedures listed in the specification will take precedence. Any conflict between this standard and any particular specification will be resolved in favor of the specification.
| SAE AMS3165F | Solvent, Petroleum Aromatic |
| MIL-C-81797 Revision A:1994 | Coating, Inorganically Bonded Aluminum (Electrophoretically Deposited) (No S/S Document) |
| A-A-3127 Base Document:1998 | Coating System: Aluminum Epoxy Mastic for Minimally Prepared Atmospheric Steel (No S/S Document) |
| MIL-DTL-43719 Revision D:2009 | Marking Materials and Markers, Adhesive, Elastomeric, Pigmented; General Specification for |
| DOD-E-18214 Revision B:1978 | ENAMEL, INTERIOR, DECK, DARK GREEN (FORMULA NO. 19) (METRIC) (S/S BY DOD-E-24635 & FED-STD-595) |
| MIL-DTL-24607 Revision B:2008 | Enamel, Interior, Nonflaming (Dry), Chlorinated Alkyd Resin |
| MIL-DTL-1115 Revision E:2010 | Enamel, Interior, Alkyd, White (Formula No. 30) |
| VV B 680 : C | BRAKE FLUID, AUTOMOTIVE |
| A-A-3161 Base Document:1998 | Primer Coating, Conditioner for Chalking Exterior Surfaces (No S/S Document) |
| DOD-E-1265 Revision D:1977 | ENAMEL, EXTERIOR, ALKYD, OCEAN GRAY, NO. 17 (FORMULA NO. 5-0) (METRIC) (S/S BY DOD-E-24635 OR FED-STD-595) |
| MIL-P-85658 Base Document:1986 | PAINT, WATER DISPLACING |
| MIL-P-24351 Revision A:1985 | PRIMER COATING, ALKYD, BLUE (FORMULA NO. 6N35-2) (S/S BY FED-STD-595/15187) |
| MIL-I-46058 Revision C:1972 | Insulating Compound, Electrical (for Coating Printed Circuit Assemblies) |
| MIL E 15090 : C | ENAMEL, EQUIPMENT, LIGHT GRAY (FORMULA NO. 111) |
| MIL-P-24608 Revision A:1987 | Pipe,Fittings, and Adhesive Kits, Glass Reinforced Thermosetting Epoxy Resin for Shipboard Piping Systems |
| MIL-P-60169 Revision B:1970 | Paper, Sealing |
| MIL-D-63370 Base Document:1981 | Dispenser, Mine Ground Vehicle, M128 Preparation for Shipment and Storage of |
| SAE AMS3721 | Tape for Organic Coatings Adhesion Testing |
| MIL-E-52891 Revision B:1988 | Enamel, Lusterless, Zinc Phosphate, Styrenated Alkyd Type |
| MIL-E-16400 Revision H:1987 | Electronic, Interior Communication and Navigation Equipment, Naval Ship and Shore: General Specification for (S/S by MIL-STD-2036) |
| MIL C 53039 : A | COATING, ALIPHATIC POLYURETHANE, SINGLE COMPONENT, CHEMICAL AGENT RESISTANT |
| ASTM B 449 : 1993 : R1998 | Standard Specification for Chromates on Aluminum |
| A-A-3067 Base Document:1996 | Paint: Alkyd, Exterior, Low Voc (No S/S Document) |
| MIL-E-82401 Base Document:1965 | Enamel, Exterior, Vinyl-Alkyd, Red (No S/S Document) |
| DOD E 24635 : (1) | ENAMEL, GRAY, SILICONE ALKYD COPOLYMER SEMIGLOSS (FOR EXTERIOR USE) (METRIC) |
| TT-P-1952 Revision F:2015 | Paint, Traffic and Airfield Marking, Waterborne |
| MIL-C-24495 Base Document:1973 | Chair, Stacking, Steel, Naval Shipboard Use (No S/S Document) |
| A-A-3132 Revision A:2003 | Coating System: Epoxy Primer/Urethane Topcoat for Minimally Prepared Atmospheric Steel (No S/S Document) |
| TT-E-505 Revision B:1985 | ENAMEL (ODORLESS, ALKYD, INTERIOR, HIGH GLOSS) (S/S BY TT-E-506) |
| TT-E-509 Revision C:1986 | ENAMEL, ODORLESS, ALKYD, INTERIOR, SEMIGLOSS, WHITE AND TINTS (S/S BY A-A-50574) |
| MIL STD 001303 : C | PAINTING OF NAVAL ORDNANCE EQUIPMENT |
| ASTM D 4592 : 2012 | Standard Specification for Preformed Retroreflective Pavement Marking Tape for Limited Service Life |
| A-A-3126 Base Document:1972 | Coating System: Tile-Like High Performance Architectural (No S/S Document) |
| MIL-C-52032 Revision D:1995 | Coating, Interior, Fuel Resistant, VOC Complaint for Gasoline Containers (No S/S Document) |
| MIL-P-15930 Revision C:1981 | PRIMER COATING, SHIPBOARD, VINYL-ZINC CHROMATE (FORMULA NO. 120 - FOR HOT SPRAY) (NO S/S DOCUMENT) |
| A-A-3121 Revision A:2004 | Paint, Rubber-Base: for Interior Use (Concrete and Masonry Floors) |
| DOD C 22325 : A | COLOR, TINTING, FOR INTERIOR NONFLAMING (DRY) PAINTS (METRIC) |
| A-A-3120 Base Document:1997 | Paint: for Swimming Pools |
| TT-P-664 Revision D:1988 | PRIMER COATING, ALKYD, CORROSION-INHIBITING, LEAD AND CHROMATE FREE, VOC-COMPLIANT (S/S BY SSPC-PAINT25) |
| DOD P 24631 : (1) SUPP 1 | PAINT, CAMOUFLAGE FOR SUBMARINES, GENERAL SPECIFICATION FOR (METRIC) |
| MIL C 53072 : B | CHEMICAL AGENT RESISTANT COATING (CARC) SYSTEM APPLICATION PROCEDURES AND QUALITY CONTROL INSPECTION |
| MIL B 46176 : A | BRAKE FLUID, SILICONE, AUTOMOTIVE, ALL WEATHER, OPERATIONAL AND PRESERVATIVE, METRIC |
| MIL-I-43295 Revision A:1968 | Ink, Marking, Vinyl |
| MIL-DTL-18492 Revision B:2011 | Tanks, Cartridge, Powder, Rocket, and Components (Aluminum) |
| MIL-PRF-24667 Revision C:2008 | Coating System, Nonskid, for Roll or Spray Application |
| TT-I-735 Revision A:1963 | Isopropyl Alcohol |
| MIL-PRF-32405 Base Document:2013 | Cleaner, Hand Wipe, Metallic Substrates, Low or Exempt VOC and HAP Free |
| MIL-C-25107 Revision B:1972 | Carbon Removing Compound, Orthodichlorobenzene, for Engine Parts (No S/S Document) |
| MIL-DTL-24631 Revision A:1997 | Paint, Camouflage for Submarines, General Specification for (Metric) |
| DOD-V-15218 Revision C:1977 | VARNISH (MIXING, PHENOLIC) (METRIC) (NO S/S DOCUMENT) |
| MIL T 81772 : B | THINNER, AIRCRAFT COATING |
| MIL-PRF-24763 Revision B:2009 | Enamel, Emulsion Type, for Shipboard use |
| MIL A 3316 : C | ADHESIVE, FIRE RESISTANT, THERMAL INSULATION |
| MIL W 3688 : C | WAX EMULSION (RUST INHIBITING) |
| DOD-P-15144 Revision B:1977 | PAINT, FORMULA NO. 34 (BINDER FOR ANTI SWEAT COATINGS) (METRIC) (NO S/S DOCUMENT) |
| MIL-S-51421 Base Document:1976 | SCREENING, CHEMICAL BIOLOGICAL FILTER (NO S/S DOCUMENT) |
| MIL-R-82483 Revision A:1976 | RESIN, POLYESTER, SOLUTIONS (NO S/S DOCUMENT) |
| TT-V-119 Revision D:1973 | VARNISH, SPAR, PHENOLIC-RESIN (S/S BY A-A-1800) |
| MIL-P-87938 Base Document:1984 | PEROXIDE, METHYL ETHYL KETONE, TECHNICAL (S/S BY A-A-59304) |
| A-A-3054 Base Document:1996 | Paint: Heat Resisting (204 Deg. C) (No S/S Document) |
| MIL-DTL-700 Revision B:1998 | Enamel, Deck, Interior, Gray (Formula No. 20L) (S/S by MIL-DTL-15090) |
| MIL-DTL-450 Revision D:2011 | Coating Compound, Bituminous Solvent Type, Black (for Ammunition) |
| MMM A 178 : A | ADHESIVE, PAPER LABEL, WATER RESISTANT |
| TT-P-55 Revision B:1965 | PAINT, POLYVINYL ACETATE EMULSION, EXTERIOR (S/S BY TT-P-19 & TT-P-96) |
| MIL-A-87135 Base Document:1979 | ADHESIVES, NON-CONDUCTIVE, FOR ELECTRONICS APPLICATION |
| MIL-C-50443 Base Document:1969 | Cartridge, 105MM, HE, M444E1, Body Assembly and Base Plug for |
| TT-L-50 Revision G:1976 | LACQUER, NITROCELLULOSE, ACRYLIC AND ACRYLIC BUTYRATE, AEROSAL (IN PRESSURIZED DISPENSERS) (NO S/S DOCUMENT) |
| MIL-C-46168 Revision D:1987 | Coating, Aliphatic Polyurethane, Chemical Agent Resistant (See Notice 1 for Replacement Information) |
| MIL P 8116 : B | PUTTY, ZINC CHROMATE, GENERAL PURPOSE |
| MIL-R-10036 Revision E:1987 | RUST ARRESTING COATING (FOR TREATMENT OF RUSTED METAL) (NO S/S DOCUMENT) |
| MIL-L-46159 Revision A:1976 | Lacquer, Acrylic, Low Reflective (S/S by MIL-C-46168 or MIL-c-53039 now MIL-DTL-53039) |
| A-A-3130 Revision A:2003 | Paint (for Application to Wet Surfaces) |
| DOD-C-24654 Base Document:1985 | COATINGS, EPOXY, PORTABLE WATER TANKS (METRIC) (S/S BY MIL-PRF-23236) |
| A-A-3007 Base Document:1996 | Thinner: for Phenol-Formaldehyde and Medium Oil and Styrenated Alkyd Paints and Varnishes |
| A-A-3164 Revision A:2007 | Synthetic Lacquer, Camouflage, Exterior, VOC Compliant |
| MIL-DTL-24441 Revision D:2009 | Paint, Epoxy-Polyamide, General Specification for |
| MIL-C-47069 Revision B:1991 | Coating, Electrically Conductive, Air-Drying (No S/S Document) |
| MIL-C-87179 Base Document:1984 | Coating, Protective, Solvent Removable, for Microcircuits (S/S by SAE-AMS2535) |
| MIL C 85322 : B | COATING ELASTOMERIC, POLYURETHANE, RAIN EROSION RESISTANT, FOR EXTERIOR AIRCRAFT USE |
| MIL P 85582 : B | PRIMER COATINGS: EPOXY, WATERBORNE |
| ASTM D 6763 : 2016 : REDLINE | Standard Guide for Testing Exterior Wood Stains and Clear Water Repellents |
| JJJ-L-821 Revision A:1969 | LITHOGRAPHIC PLATE PRESERVING GUM (NO S/S DOCUMENT) |
| MIL L 14486 : A NOTICE 1 | LACQUER, VINYL RESIN, SEMI-GLOSS |
| MIL-PRF-32171 Revision B:2009 | Deck Coatings, High Durability |
| MMM-A-122 Revision C:1978 | ADHESIVE, BUTADIENE ACRYLONITRILE BASE, MEDIUM SOLIDS, GENERAL PURPOSE (NO S/S DOCUMENT) |
| MIL-A-17682 Revision E:1982 | Adhesive, Starch (S/S by A-A-50535) |
| MIL W 18723 : D | WAX, AIRCRAFT, WATERPROOF, SOLVENT TYPE |
| MIL-A-60091 Revision B:1988 | Adhesive for Bonding Demolition Charges to Structural Surfaces (No S/S Document) |
| MIL P 53030 : A | PRIMER COATING, EPOXY, WATER REDUCIBLE, LEAD & CHROMATE FREE |
| MIL D 7850 : A | DOPE, CELLULOSE - ACETATE - BUTYRATE, FIRST COAT, FUNGICIDAL |
| TT-S-179 Revision B:1975 | SEALER SURFACE, PIGMENTED OIL, FOR PLASTER AND WALLBOARD (S/S BY A-A-2994) |
| MIL-PRF-4556 Revision F:1998 | Coating Kit, Epoxy, for Interior of Steel Fuel Tanks (S/S by MIL-PRF-23236) |
| TT-P-85 Revision E:1977 | PAINT, TRAFFIC AND AIRFIELD MARKING, SOLVENT BASE (S/S BY TT-P-1952 OR A-A-2886) |
| MIL-F-22735 Revision C:1980 | Film, Elastomeric, Fluorescent, for Weapons System (ASG) (No S/S Document) |
| AA-V-200 Revision A:1965 | Venetian Blinds (No S/S Document) |
| MIL-C-47068 Base Document:1974 | Coating, Conductive, Epoxy, Silver (S/S by SAE-AMS3682) |
| CCC-S-00320 Base Document:1963 | Sheeting and Tape, Reflective, Adhesive Backing (S/S by L-S-300) |
| TT P 1411 : A | PAINT, COPOLYMER RESIN, CEMENTITIOUS (FOR WATERPROOFING CONCRETE AND MASONRY WALLS) |
| TT-P-1757 Revision B:1997 | Primer Coating, ALKYD Base, One Component |
| TT-P-645 Revision C:2013 | Paint, Alkyd Type, Formula Number 84 |
| MIL-T-23624 Base Document:1962 | TOLYLENE - 2, 4 - DIISOCYANATE (NO S/S DOCUMENT) |
| TT-R-2918 Revision A:2001 | Remover, Paint, No Hazardous Air Pollutants (HAPS) |
| L-S-125 Revision B:1972 | Screening, Nonmetallic, Insect (No S/S Document) |
| MIL-E-46096 Revision C:1973 | Enamel, Lustreless, Quick Drying, Styrenated Alkyd Type, Solar Heat Reflecting (S/S by MIL-C-46168 or MIL-DTL-53039) |
| TT-F-325 Revision A:1965 | Filler, Engraving, Stamped Marking |
| TT-P-662 Revision B:1969 | PRIMER SURFACER, SANDING, LACQUER AND ENAMEL TYPE (NO S/S DOCUMENT) |
| MIL-L-19537 Revision C:1965 | Lacquer: Acrylic-Nitrocellulose Gloss (for Aircraft use) (S/S by MIL-L-81352) |
| MIL-G-51145 Revision A:1967 | Glazing Compound, Baking Pan (No S/S Document) |
| TT-P-1728 Revision A:1974 | PAINT, LATEX-BASE, INTERIOR, FLAT, DEEP TONE (NO S/S DOCUMENT) |
| TT-P-641 Revision G:1976 | Primer, Paint, Zinc Dust-Zinc Oxide (for Galvanized Surfaces) (S/S by MIL-DTL-24441/20) |
| ASTM B 921 : 2008 : R2018 | Standard Specification for Non-hexavalent Chromium Conversion Coatings on Aluminum and Aluminum Alloys |
| ASTM E 1795 : 2017 : REDLINE | Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
| ASTM D 3322 : 1982 : R2001 | Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal |
| ASTM D 3334 : 1980 | Methods of Testing Fabrics Woven from Polyolefin Monofilaments (Withdrawn 1990) |
| ASTM F 726 : 2017 : REDLINE | Standard Test Method for Sorbent Performance of Adsorbents for use on Crude Oil and Related Spills |
| ASTM E 1797 : 2012 | Standard Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
| ASTM B 635 : 2000 : R2009 | Standard Specification for Coatings of Cadmium-Tin Mechanically Deposited |
| ASTM B 449 : 1993 : R2004 | Standard Specification for Chromates on Aluminum |
| ASTM D 3218 : 2007 : R2018 | Standard Specification for Polyolefin Monofilaments |
| PD IEC/PAS 61249-8-1:2014 | Qualification and performance of electrical insulating compound for printed wiring assemblies |
| ASME AG-1 : 2019 | CODE ON NUCLEAR AIR AND GAS TREATMENT |
| MIL BULL 343 : A | DOCUMENTS APPLICABLE TO AIRCRAFT ENGINES AND PROPELLERS, USE OF |
| MIL-PRF-25134 Revision C:1996 | REMOVER, PAINT AND LACQUER, SOLVENT TYPE (NO S/S DOCUMENT) |
| AA-R-200 Revision F:1987 | Refrigerator, Mechanical, Commercial, Self-Contained, Reach-In and Pass-Through (No S/S Document) |
| ASME AG 1 : 2012 | CODE ON NUCLEAR AIR AND GAS TREATMENT |
| MIL-B-28658 Revision E:1991 | Building Components, Panelized, Prefabricated Ready-Cut, Relocatable (No S/S Document) |
| MIL-B-29171 Revision B:1991 | Buildings, Relocatable, Insulated, Metal, Folding Frame (No S/S Document) |
| TT-E-2784 Revision A:1991 | ENAMEL (ACRYLIC-EMULSION, EXTERIOR) (S/S BY A-A-3183) |
| TT-F-1098 Revision D:1974 | FILLER, BLOCK SOLVENT THINNER, FOR POROUS SURFACES (CONCRETE BLOCK, CINDER BLOCK, STUCCO, ETC.) (NO S/S DOCUMENT) |
| P-W-2891 Revision A:2002 | Wipe Solvents, Exempt and Non-Exempt |
| MIL-C-81945 Revision B:1989 | Coating Compounds, Weapon Insulation, Intumescent |
| TT-E-527 Revision D:1988 | ENAMEL, ALKYD, LUSTERLESS, LOW VOC CONTENT (NO S/S DOCUMENT) |
| TT-P-29 Revision K:1991 | PAINT, LATEX (S/S BY A-A-2246) |
| MIL-C-83231 Revision A:1981 | Coatings, Polyurethane, Rain Erosion Resistant for Exterior Aircraft and Missile Plastic Parts (S/S by SAE-AMS-C-83231) |
| MIL-P-21600 Revision A:1962 | PAINT SYSTEM, FLUORESCENT, REMOVABLE, FOR AIRCRAFT APPLICATION (S/S BY SAE-AMS-P-21600) |
| MIL-L-45779 Revision C:1984 | Loader - Transporter, Guided Missile: XM501E2 and XM501E3; Processing for Storage and Shipment of (See Notice 1 for Replacement Information) |
| MIL-W-71125 Base Document:1992 | WOOD PRESERVATIVES: WATERBORNE OR WATER REDUCIBLE (S/S BY A-A-59276) |
| DOD-P-15328 Revision D:1978 | Primer (Wash), Pretreatment (Formula NO. 117 for Metals) (Metric) (S/S by TT-C-490) |
| MIL P 11414 : E | PRIMER COATING, LACQUER, RUST INHIBITING |
| MIL P 53022 : B | PRIMER, EPOXY COATING, CORROSION INHIBITING, LEAD & CHROMATE FREE |
| TT-P-38 Revision E:1985 | PAINT, ALUMINUM, READY-MIXED (NO S/S DOCUMENT) |
| TT-P-86 Revision H:1987 | PAINT, RED-LEAD BASE, READY-MIXED (NO S/S DOCUMENT) |
| DOD E 700 : A | ENAMEL, DECK, INTERIOR, GRAY (FORMULA NO.20L) (METRIC) |
| ASTM D 3218 : 2007 | Standard Specification for Polyolefin Monofilaments |
| TT-L-47 Revision C:1976 | LACQUER, FLUORESCENT TYPE, SYNTHETIC BASE IN PRESSURIZED CONTAINER (S/S BY A-A-713) |
| MIL-I-24718 Base Document:1990 | Insulating Resins, Solventless, Vacuum-Pressure-Impregnating; General Specification for |
| MIL S 14947 : NOTICE 2 | SIGHT ASSEMBLY, FRONT |
| MIL-C-14836 Revision A:1972 | Case, Projectile, Burster, M9A1 |
| MIL-P-28642 Base Document:1977 | PAINT (TOPCOAT), VINYL CHLORIDE-ACETATE COPOLYMER, HIGH-BUILD (FOR STEEL AND MASONRY) (S/S BY MIL-P-24441 AND MIL-C-85285) |
| MIL-PRF-8116D:2014 | PUTTY, GENERAL PURPOSE, NON-HARDENING |
| MIL-P-47215 Revision B:1992 | Primer, Ablative Resistant Coating (No S/S Document) |
| MIL E 1115 : D | ENAMEL, INTERIOR AND EXTERIOR, ALKYD, WHITE (FORMULA NO. 30) |
| MIL-E-52929 Base Document:1977 | Enamel, Alkyd, Camouflage, Flash Dry (S/S by MIL-C-46168 or MIL-DTL-53039) |
| MIL-P-46105 Base Document:1966 | PRIMER COATING, WELD-THROUGH, ZINC-RICH (S/S BY SSPC-PAINT30) |
| TT-P-001957 Base Document:1984 | PAINT, LATEX (BACTERIOSTATIC AND FUNGISTATIC) (NO S/S DOCUMENT) |
| MIL C 87895 : 0 | COMPOUND, POLYMERIC BASED, HOT MELT (CAVITY LINING), (FOR INTERNAL USE IN AMMUNITION) |
| SAE AS6370A | Wire, Electrical, Insulated, Antenna |
| MIL-C-47092 Base Document:1974 | Coating, Polyvinyl Chloride, Application of (No S/S Document) |
| MIL-P-38336 Revision A:1994 | PRIMER COATING, INORGANIC, ZINC DUST PIGMENTED, SELF-CURING, FOR STEEL SURFACES (S/S BY SAE-AMS-P-38336) |
| TT-T-306 Revision E:1993 | THINNER, SYNTHETIC RESIN ENAMELS (S/S BY A-A-3007) |
| MIL-C-17504 Revision B:1960 | Coating Compound, Acrylic, Clear (No S/S Document) |
| MIL F 18264 : D | FINISHES: ORGANIC, WEAPONS SYSTEM, APPLICATION AND CONTROL OF |
| AASHTO T 237 : 2005 | METHOD OF TEST FOR TESTING EPOXY RESIN ADHESIVE |
| MIL-B-18670 Revision A:1976 | Box, Small Arms Ammunition, Mark 1 Mod 0 |
| O-L-164 Revision D:1970 | LEATHER DRESSING, MILDEW PREVENTIVE (NO S/S DOCUMENT) |
| MIL-HDBK-510 Revision A:2014 | Aerospace Fuels Certification |
| MIL-I-17563 Revision C:1992 | Impregnants for Cast of Powder Metal Components |
| MIL-C-40084 Revision C:1990 | Corrosion Preventive Compound, Water-Emulsifiable, Oil Type |
| MIL-W-6370 Revision C:1963 | Wire, Electrical, Insulated, Antenna (S/S by SAE-AS6370) |
| MIL-C-83445 Revision A:1980 | Coating System, Polyurethane, Non-Yellowing, White, Rain Erosion Resistant, Thermally Reflective (S/S by SAE-AMS-C-83445) |
| TT-L-57 Revision C:1972 | LACQUER, RUBBING, CLEAR, (FOR WOOD FURNITURE) (S/S BY A-A-2850) |
| TT-P-47 Revision G:1984 | PAINT, OIL (NONPENETRATING - FLAT, READY-MIXED TINTS AND WHITE) (S/S BY A-A-2246) |
| MIL-P-70524 Base Document:1990 | Projectile, 105mm, HE, RA, XM913/XM927 Warhead Insulation Assembly For |
| MIL-E-19603 Revision C:1974 | Enamel, Baking, for Roller Coat Application |
| TT-P-001385 Base Document:1976 | PRIMER COATING, SYNTHETIC, GRAY (FOR METAL EQUIPMENT) (S/S BY A-A-2786, TT-P-664) |
| MIL-C-82747 Base Document:1988 | Coating Polyurethane Clear, Safflower Oil Modified Alkyd (No S/S Document) |
| MIL-C-87936 Revision A:1985 | Cleaning Compounds, Aircraft Exterior Surfaces, Water Dilutable (S/S by MIL-C-87937) |
| DOD-P-24555 Base Document:1977 | Paint, Aluminum, Heat-Resisting (650 Degree C), Low-Emissivity (0.40 or Less) (Metric) |
| SS-S-1996 Base Document:1976 | SEALER, WATER AND WEATHER RESISTANT, FOR ASPHALT, CONCRETE, AND MASONRY SURFACES (NO S/S DOCUMENT) |
| MIL P 24441 : B | PAINT, EPOXY POLYAMIDE, GENERAL SPECIFICATION FOR |
| TT-N-97 Revision D:2007 | Naphtha; Aromatic |
| MIL P 52995 : 0 | PRIMER COATING, SYNTHETIC, CORROSION INHIBITING, LACQUER RESISTING, LEAD AND CHROMATE FREE |
| TT-E-001793 Base Document:1972 | ENAMEL, SEMI-GLOSS, FOR METAL AND WOOD FURNITURE (S/S BY TT-E-2784 & A-A-2787) |
| TT-L-58 Revision E:1978 | LACQUER, SPRAYING, CLEAR AND PIGMENTED, FOR INTERIOR USE (S/S BY A-A-3003) |
| MIL-C-53004 Revision B:1989 | Camouflage Screening Systems, Modular, Lightweight, Synthetic, Woodland, Desert and Snow |
| MIL A 8625 : F | ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS |
| TT-P-1565 Revision B:1978 | PAINT, BOOT-TOPPING BLACK (NO S/S DOCUMENT) |
| MIL-T-6095 Revision B:1969 | THINNER, CELLULOSE-NITRATE-DOPE, BLUSH RETARDING (NO S/S DOCUMENT) |
| MIL-P-514 Revision D:1966 | PLATE, IDENTIFICATION, INSTRUCTION AND MARKING, BLANK (S/S BY A-A-50271) |
| MIL-E-199 Revision A:1962 | Ether, Diethyl, Technical |
| GG R 1506 : A | ROD, LEVEL. PHILADELPHIA |
| MIL-C-82594 Base Document:1971 | Corrosion Preventive Compound and Surface Sealer for Nonferrous Metals (No S/S Document) |
| SAE AS22805 | Spray Kit, Self Pressurized |
| TT-P-615 Revision D:1967 | PRIMER COATING: BASIC LEAD CHROMATE READY MIXED (NO S/S DOCUMENT) |
| MMM-A-179 Revision B:1982 | ADHESIVE: PAPER LABEL (S/S BY A-A-3006) |
| MIL-V-16399 Revision A:1971 | Varnish, Moistureproof |
| MIL P 28640 : 0 | POLYSULFIDE LATEX, WD-6 |
| TT-P-1510 Revision A:1975 | PAINT, LATEX, EXTERIOR, FOR WOOD SURFACES, WHITE AND TINTS (NO S/S DOCUMENT) |
| MIL-P-52192 Revision B:1971 | Primer Coating, Epoxy (S/S by MIL-P-53022, or MIL-P-53030) |
| TT-P-636 Revision D:1971 | PRIMER COATING, ALKYD, WOOD AND FERROUS METAL (S/S BY TT-P-664, MIL-P-53030) |
| MIL C 46081 : A | COATING COMPOUND, THERMAL INSULATING (INTUMESCENT) |
| MIL-F-52252 Base Document:1962 | Filter, Dent, Metal Surface (No S/S Document) |
| MIL-PRF-32170 Revision A:2006 | Deck Tiles, Wear-Resistant |
| TT-E-490 Revision E:1975 | Enamel, Silicone Alkyd Copolymer, Semigloss (for Exterior and Interior Use (S/S by MIL-PRF-24635) |
| TT-F-336 Revision E:1978 | FILLER, WOOD, PASTE (NO S/S DOCUMENT) |
| MIL E 24635 : B | ENAMEL, SILICONE ALKYD COPOLYMER (METRIC) |
| MIL E 11195 : E | ENAMEL, LUSTERLESS, FAST DRY, VOC COMPLAINT |
| MIL-B-24781 Base Document:1993 | Batterboard Systems, Synthetic (S/S by A-A-59001) |
| TT-S-708 Revision A:1962 | STAIN, OIL, SEMI-TRANSPARENT, WOOD, EXTERIOR (NO S/S DOCUMENT) |
| SAE AMSP21600A | Paint System, Fluorescent, Removable, for Aircraft Application |
| MIL L 46171 : NOTICE 1 | LACQUER, LUSTRELESS, HOT SPRAY FOR TIP IDENTIFICATION OF AMMUNITION (FOR PROCUREMENT USE MIL-L-1195) |
| TT-P-110 Revision C:1977 | PAINT, TRAFFIC BLACK (NONREFLECTORIZED) (S/S BY TT-P-1952 OR A-A-2886) |
| MIL-C-11796 Revision C:1986 | Corrosion Preventive Compound, Petrolatum, Hot Application |
| DOD-P-24655 Base Document:1985 | PAINT, UNDERWATER HULL, ANTICORROSION (METRIC) (S/S BY DOD-P-24647) |
| DOD E 1115 : C | ENAMEL, INTERIOR, ALKYD, WHITE [FORMULA NO.30] METRIC |
| A-A-50542 Revision A:1994 | Coating System: Reflective, Slip-Resistant, Chemical-Resistant Urethane for Maintenance Facility Floors (No S/S Document) |
| TT-P-605 Revision B:1976 | PRIMER COATING, ALL PURPOSE GRAY, ALKYD (IN PRESSURIZED DISPENSERS) (S/S BY A-A-1551) |
| MIL-P-22298 Revision A:1985 | PAINT, BLACK, POLYISOBUTYLENE (FORMULA NO. 133) (S/S BY DOD-P-24631) |
| MIL-PRF-26915 Revision D:1997 | Primer Coating, for Steel Surfaces (Future Acquisitions for this Item May Refer to: MIL-PRF-32550 and MIL-DTL-53022) |
| MIL-DTL-53022 Revision C Interim Revision:2007 | Primer, Epoxy Coating, Corrosion Inhibiting Lead and Chromate Free |
| A-A-1788 Base Document:1997 | VARNISH, OIL: INTERIOR (NO S/S DOCUMENT) |
| TT-E-489 Revision J:1994 | Enamel, Alkyd, Gloss, Low VOC Content (See Notice 2 for Replacement Information) |
| ASTM D 3322 : 1982 : R1996 : EDT 1 | Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal |
| MIL P 53084 : 0 | PRIMER, CATHODIC ELECTRODEPOSITION, CHEMICAL AGENT RESISTANT |
| TT-P-2756 Revision A:1996 | Polyurethane Coating: Self-Priming Topcoat, Low Volatile Organic Compounds (VOC) Content (No S/S Document) |
| MIL-I-6869 Revision D:1971 | Impregnants for Aluminum Alloy and Magnesium Alloy Castings (S/S by MIL-I-17563) |
| TT-P-650 Revision D:1988 | Primer Coating, Latex Base, Interior, White (for Gypsum Wallboard) (See Notice 1 for Replacement Information) |
| MIL P 14105 : D | PAINT, HEAT-RESISTING (FOR STEEL SURFACES) |
| SAE AMSC5541A | Chemical Conversion Coatings on Aluminum and Aluminum Alloys |
| MIL-C-83019 Base Document:1968 | Coating, Polyurethane, for Protection of Integral Fuel Tank Sealing Compound |
| MIL-A-3167 Revision A:1976 | Adhesives (for Plastic Inhibitors) |
| MIL-C-81562 Revision B:1983 | Coatings, Cadmium, Tin-Cadmium and Zinc (Mechanically Deposited) (S/S by SAE-AMS-C-81562) |
| MIL-PRF-81352 Revision C:2005 | Coatings, Aircraft Touch-Up |
| MIL L 11195 : D | LACQUER, LUSTRELESS, HOT SPRAY |
| MIL-A-63576 Revision A:1985 | Aluminum Oxide Coatings, Lubricative, for Aluminum and Aluminum Alloys (No S/S Document) |
| MIL P 26915 : C | PRIMER COATING, ZINC DUST PIGMENTED, FOR STEEL SURFACES |
| MIL-C-29475 Base Document:1994 | Coating, Water Borne Polyurethane Camouflage (S/S by MIL-DTL-64159) |
| ASTM D 4712 : 1987 : REV A : R1996 | Standard Guide for Testing Industrial Water-Reducible Coatings |
| ASTM D 3322 : 1982 : R2011 | Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal |
| ASTM D 3730 : 2017 : REDLINE | Standard Guide for Testing High-Performance Interior Architectural Wall Coatings |
| ASTM D 3322 : 1982 : R2005 | Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal |
| MIL-L-296 Revision B:1973 | Lacquer, Purple |
| DOD E 24607 : A | ENAMEL, INTERIOR, NONFLAMING (DRY), CHLORINATED ALKYD RESIN, SEMIGLOSS (METRIC) |
| SSPC-PAINT 43 : 2012 | DIRECT-TO-METAL ALIPHATIC POLYUREA COATING, PERFORMANCE-BASED |
| TT L 34 : B INT AMD (1) | LACQUER, (WORKABLE FIXATIVE) NITROCELLULOSE (IN PRESSURIZED DISPENSERS) |
| WW-P-405 Revision B:1974 | Pipe, Corrugated (Iron or Steel, Zinc Coated) (S/S by ASTM-A760/ASTM-A760M, ASTM-A761/ASTM-A761M, ASTM-A762/ASTM-A762M, and ASTM-A849 |
| L-C-530 Revision C:1987 | COATING, PIPE, THERMOPLASTIC RESIN (NO S/S DOCUMENT) |
| MIL-D-5549 Revision B:1971 | Dope, Cellulose-Acetate-Butyrate Clear for Aircraft Use (No S/S Document) |
| MIL-P-85121 Base Document:1980 | Projectiles, 20mm Mark 100 Series |
| MIL-E-46145 Base Document:1970 | Enamel, Fungus Resistant, Lustreless, Quick Drying, Styrenated Alkyd Type (No S/S Document) |
| DOD PRF 24176 : B | CEMENT, EPOXY, METAL REPAIR AND HULL SMOOTHING (METRIC) |
| MIL-C-27725 Revision B:1969 | Coating, Corrosion Preventive, for Aircraft Integral Fuel Tanks (S/S by SAE-AMS-C-27725) |
| MIL-P-53032 Base Document:1983 | PRIMER COATING, WATER REDUCIBLE, EPOXY ESTER-LATEX TYPE, LEAD AND CHROMATE FREE (NO S/S DOCUMENT) |
| MIL C 81904 : B | COATING COMPOUND, THERMAL INSULATION, ABLATIVE |
| TT-P-31 Revision D:1973 | PAINT, OIL, IRON-OXIDE, READY-MIXED, RED AND BROWN (S/S BY SSPC-PAINT25) |
| TT-R-248 Revision B:1981 | REMOVER, PAINT AND LACQUER, SOLVENT TYPE |
| TT-P-002119 Base Document:1980 | PAINT, LATEX BASE, HIGH TRAFFIC AREA, FLAT AND EGGSHELL FINISH (LOW LUSTRE), (FOR INTERIOR USE) (S/S BY A-A-2246) |
| MIL-C-83873 Revision A:1993 | Cleaning Compound, Precoating Surface, Aircraft and Aerospace Ground Equipment (Age) (S/S by MIL-C-87937) |
| MIL-W-14993 Revision B:1975 | WARHEAD SECTION, GUIDED MISSILE, PRACTICE, M231 (NO S/S DOCUMENT) |
| TT-E-485 Revision F:1968 | ENAMEL, SEMIGLOSS, RUST-INHIBITING (NO S/S DOCUMENT) |
| MIL-P-21563 Revision B:1962 | Paint System, Fluorescent, for Aircraft Application (No S/S Document) |
| ASTM D 2932 : 1980 : R1988 : EDT 1 | Guide for Testing Exterior Solvent-Based House and Trim Coatings (Withdrawn 1993) |
| MIL-PRF-23236 Revision D:2009 | Coating Systems for Ship Structures |
| MIL P 46093 : A | PRIMER COATING, SYNTHETIC (FOR BRAKE DRUMS) |
| MIL-P-22332 Revision B:1972 | Paint, Priming, Exterior and Interior (for Ammunition) (S/S by MIL-DTL-11414) |
| TT P 659 : C | PRIMER COATING & SURFACER SYNTHETIC, TINTS & WHITE, (FOR METAL & WOOD SURFACE) |
| MIL-T-48149 Revision A:1976 | Titanium Dioxide, Dry |
| MIL-L-46075 Revision A:1971 | Lacquer, Red (for Ammunition Primers) |
| MIL-V-173 Revision C:1969 | Varnish, Moisture-and-Fungus Resistant (for Treatment of Communications, Electronic, and Associated Equipment) User may Consult ASTM-D3955 and ASTM-D295) |
| SAE AS7108C | NADCAP Audit Criteria for Chemical Processing |
| TT-E-751 Revision C:1967 | Ethyl Acetate, Technical |
| TT-C-520 Revision B:1973 | COATING COMPOUND, BITUMINOUS, SOLVENT TYPE, UNDERBODY (FOR MOTOR VEHICLES)(S/S BY MIL-C-62218) |
| MIL C 22750 : F | COATING, EPOXY, VOC-COMPLIANT |
| MIL-C-18187 Revision A:1965 | Costings, Protective; Application to Fabric Surfaces of Aircraft (No S/S DOCUMENT) |
| TT-P-620 Revision C:1968 | PRIMER COATING, CONDITIONER FOR CHALKING EXTERIOR SURFACES (S/S BY A-A-3161) |
| A-A-2994 Base Document:1996 | Primer Coating, Interior, for Walls and Wood (No S/S Document) |
| ASTM B 635 : 2000 : R2004 : EDT 1 | Standard Specification for Coatings of Cadmium-Tin Mechanically Deposited |
| TT-S-001992 Base Document:1975 | STAIN, LATEX, EXTERIOR FOR WOOD SURFACES (NO S/S DOCUMENT) |
| TT-N-95 Revision B:1967 | Naphtha, Aliphatic |
| TT-L-1155 Base Document:1967 | LINSEED OIL, ALKALI REFINED (S/S BY A-A-714) |
| MIL-STD-1303 Revision B:1975 | Painting of Naval Ordnance Equipment (No S/S Document) |
| MIL P 47160 : 0 | PAINT, OPTICAL, BLACK |
| MIL L 13629 : C NOTICE 1 | LACQUER, AIR DRYING FOR CRIMPED PARTS |
| MIL-DTL-53030 Revision B Interim Revision:2003 | Primer Coating, Epoxy, Water Based, Lead and Chromate Free |
| DOD-E-18210 Revision B:1978 | ENAMEL, INTERIOR, DECK, RED (FORMULA NO. 23) (METRIC) (S/S BY DOD-E-24635 & FED-STD-595) |
| MIL-P-22299 Revision B:1985 | PAINT, ANTIFOULING, POLYISOBUTYLENE (FORMULA NO. 134) (S/S BY DOD-P-24631) |
| MIL P 19834 : B | PLATE, IDENTIFICATION, METAL FOIL, ADHESIVE BACKED |
| MIL-C-81751 Revision B:1972 | Coating, Metallic-Ceramic |
| MIL-P-60812 Base Document:1968 | Projectile, 4.2 Inch, WP, Smoke, M328A1 Metal Parts Assembly |
| MIL-P-20689 Revision D:1988 | PLASTIC PLASTISOL (FOR COATING METALLIC OBJECTS) (S/S BY A-A-59464) |
| SS-S-210 Revision A:1975 | Sealing Compound, Preformed Plastic, for Expansion Joints and Pipe Joints (No S/S Document) |
| MIL-DTL-15090 Revision E:2010 | Enamel, Equipment, Light Gray (Navy Formula No.111) |
| MIL-PRF-24613 Revision A:2007 | Deck Covering Materials, Interior, Cosmetic Polymeric |
| TT C 517 : A | COATING, STRIPPABLE MASKING (FOR SPRAY BOOTHS AND GLASS) |
| TT-V-121 Revision H:1978 | Varnish, Spar, Water-Resisting (S/S by A-A-1800) |
| MIL-B-8942 Revision A:1965 | Bearings, Plain, TFE Lined, Self-Aligning |
| MIL C 46127 : A | COATING, GRAY, UNDERCOAT (SOLAR HEAT REFLECTING) |
| MIL-A-81801 Revision A:1994 | Anodic Coating for Zinc and Zinc Alloys (No S/S Document) |
| TT-S-223 Revision B:1978 | SEALER, SURFACE, FLOOR, WATER EMULSION (S/S BY A-A-2542) |
| MIL-E-52835 Revision A:1977 | Enamel, Modified Alkyd, Camouflage, Lusterless (S/S by MIL-C-46168 or MIL-DTL-53039) |
| TT P 25 : F NOTICE 1 | PRIMER COATING, EXTERIOR UNDERCOAT FOR WOOD, READY-MIXED, WHITE AND TINTS |
| MIL C 27315 : A | COATING SYSTEMS, ELASTOMERIC, THERMALLY REFLECTIVE AND RAIN EROSION RESISTANT |
| TT-L-132 Base Document:1966 | LITHOGRAPHIC PLATE ASPHALTUM SOLUTION (NO S/S DOCUMENT) |
| MIL-P-19602 Revision B:1974 | Primer, Size Coating, Baking, for Roller Coat Application |
| MIL-STD-808 Revision A:1983 | FINISH, MATERIALS AND PROCESSES FOR CORROSION PREVENTION AND CONTROL IN SUPPORT EQUIPMENT |
| A-A-3165 Revision A:2007 | Lacquer, Gloss, for Aircraft Use |
| MIL L 52909 : NOTICE 1 | LACQUER, ACRYLIC, CAMOUFLAGE, LUSTERLESS |
| TT-E-508 Revision C:1977 | ENAMEL, INTERIOR SEMIGLOSS, TINTS AND WHITES (S/S BY A-A-50574) |
| SAE AMS3095A | Paint: High Gloss For Airline Exterior System |
| MMM-A-130 Revision B:1974 | ADHESIVE, CONTACT (S/S BY A-A-1936) |
| MIL-C-47044 Base Document:1965 | Coating, Conformal of Welded Modules, Process Requirements for (No S/S Document) |
| MMM-A-00150 Revision B:1976 | ADHESIVE FOR ACOUSTICAL MATERIALS (NO S/S DOCUMENT) |
| TT-P-115 Revision F:1984 | PAINT, TRAFFIC, HIGHWAY, WHITE AND YELLOW (NO S/S DOCUMENT) |
| MIL-C-8507 Revision D:1963 | Coating, Wash Primer (Pretreatment) for Metals, Application of (for Aeronautical Use) |
| MIL C 5541 : E | CHEMICAL CONVERSION COATINGS ON ALUMINUM AND ALUMINUM ALLOYS |
| MIL-E-52798 Revision A:1976 | Enamel, Alkyd, Camouflage (S/S by MIL-C-46168 or MIL-DTL-53039) |
| MIL D 48561 : A | |
| TT E 00488 : B | ENAMEL, PRIMER COATING AND CLEAR LACQUER (IN PRESSURIZED DISPENSERS) |
| MIL-P-87112 Base Document:1977 | PRIMER COATING, ELASTOMERIC, POLYSULFIDE, CORROSION INHIBITING |
| MIL-P-15931 Revision F:1991 | PAINT, ANTIFOULING, VINYL (FORMULAS NO. 121A, AND 129A) (SEE NOTICE 1 FOR REPLACEMENT INFORMATION) |
| TT-E-776 Revision B:1960 | Ethylene Glycol Monobutyl Ether (for Use in Organic Coatings) (S/S by ASTM-D330) |
| MIL-C-81346 Revision B:1973 | Compound, Deck Covering, Nonslip, Lightweight for Aluminum Alloy Landing Mats (No S/S Document) |
| MIL-V-83148 Base Document:1970 | VARNISHES, ELECTRICALLY INSULATIVE, MOISTURE-, FUNGUS-, AND HIGH TEMPERATURE-RESISTANT (NO S/S DOCUMENT) |
| MIL-PRF-24635 Revision E:2009 | Coating System, Weather-Resistant, Exterior Use |
| MIL-A-24179 Revision A:1969 | Adhesive, Flexible Unicellular-Plastic Thermal Insulation |
| MIL C 47070 : 0 | COMPOUND, URETHANE |
| TT-P-37 Revision C:1968 | PAINT, ALKYD RESIN, EXTERIOR TRIM, DEEP COLORS (NO S/S DOCUMENT) |
| MIL-F-13088 Revision A:1966 | Finish, Protective, Tung (China Wood) Oil Base (For Wooden Components of Small Arms) |
| MIL P 28641 : 0 | PRIMER COATING, VINYL CHLORIDE ACETATE COPOLYMER, HIGH BUILD (FOR STEEL AND MASONRY) |
| ASTM B 921 : 2008 : R2013 | Standard Specification for Non-hexavalent Chromium Conversion Coatings on Aluminum and Aluminum Alloys |
| SAE AMS3259B | Sealing Compound, Polythioether Nonchromated, Corrosion Inhibiting for Intermittent Use to 360°F (182°C) |
| SAE AMS3603A | Protective Film, High Performance, Polymeric Pressure Sensitive Adhesive, for Aircraft Exterior Applications |
| ASTM D 4592 : 2012 : R2017 | Standard Specification for Preformed Retroreflective Pavement Marking Tape for Limited Service Life |
| MIL-STD-186 Revision F:2002 | Manufacturing Process Protective Finishingfor Army Missile Weapon Systems |
| MIL-T-19588 Revision A:1964 | TOLUENE-METHYL ISOBUTYL KETONE MIXTURE (NO S/S DOCUMENT) |
| A-A-3185 Base Document:2001 | Paint, Latex (Containing Post-Consumer Material) (See Notice 2 for Replacement Information) |
| MIL-PRF-24596 Revision B:2009 | Coating Compounds, Nonflaming, Fire-Resistant |
| MIL-C-12475 Revision D:1968 | Chair, Straight, W/O Arms (No S/S Document) |
| MIL-DTL-3688 Revision D:2005 | Wax Emulsion (Rust Inhibiting) |
| MIL-C-10578 Revision D:1982 | Corrosion Removing and Metal Conditioning Compound (Phosphoric Acid Base) |
| MIL-S-0010133 Revision D:1974 | SEAT, OUTLET-VALVE, ALUMINUM-BASE-ALLOY DIECASTING FOR OUTLET VALVE, C15 (NO S/S DOCUMENT) |
| MIL E 46136 : A | ENAMEL, SEMI-GLOSS, ALKYD, SOLAR HEAT REFLECTING, OLIVE DRAB |
| MIL-P-52905 Revision A:1994 | PAINT CAMOUFLAGE, REMOVABLE (NO S/S DOCUMENT) |
| MIL-C-47138 Base Document:1965 | Coating, Polyvinyl Chloride (No S/S Document) |
| DOD P 24648 : 0 | PRIMER COATING, ZINC DUST PIGMENTED FOR EXTERIOR STEEL SURFACES (METRIC) |
| TT-E-515 Revision A:1971 | ENAMEL, ALKYD, LUSTERLESS, QUICK-DRYING (NO S/S DOCUMENT) |
| P-P-200 Revision D:0197 | PEN CLEANER, LIQUID (NO S/S DOCUMENT) |
| MIL-S-11207 Revision D:1966 | STEEL SHEETS, CORRUGATED, 2-1/2-INCH NOMINAL CORRUGATIONS, PAINTED OR UNPAINTED (S/S BY A-A-52313) |
| MIL-C-10119 Revision C:1984 | Canister, M11; Components for (No S/S Document) |
| MIL-C-46157 Revision A:1983 | Coating Compound, Temporary Protective for Retrograde Materials (No S/S Document) |
| MIL C 46883 : 0 | COATING, OPTICAL BLACK |
| MIL L 46142 : 0 | LACQUER, LUSTRELESS, SOLAR HEAT REFLECTING |
| MIL L 52962 : 0 | LACQUER, CHLOROSULFONATED POLYETHYLENE, CAMOUFLAGE, LUSTERLESS |
| MMM-A-187 Revision B:1968 | ADHESIVE, EPOXY RESIN BASE LOW AND INTERMEDIATE STRENGTH, GENERAL PURPOSE (S/S BY A-A-3053) |
| MIL-C-21109 Revision C:1988 | Cloth, Coated, Nylon, Raft Botton |
| GGG-T-106 Revision F:1987 | TAPE, MEASURING, (GENERAL USE) (NO S/S DOCUMENT) |
| MIL-A-82484 Base Document:1967 | Adhesive and Sealing Compounds, Cellulose Nitrate Base, Solvent Type (for Ordnance Use) |
| TT-V-51 Revision F:1974 | Varnish: Asphalt (S/S by A-A-1632) |
| TT-P-96 Revision D:1976 | PAINT, LATEX BASE, FOR EXTERIOR SURFACES (WHITE AND TINTS) (S/S BY TT-P-19) |
| TT-P-1181 Revision A:1968 | PAINT, STYRENE-ACRYLATE SOLVENT TYPE, TINTS AND DEEP TONES (FOR EXTERIOR MASONRY) (S/S BY TT-P-95) |
| TT C 00598 : C | CALKING COMPOUND, OIL AND RESIN BASE TYPE (FOR BUILDING CONSTRUCTION) |
| MIL P 47279 : NOTICE 1 | PRIMER, SILICONE ADHESIVE |
| TT I 00559 : C | INK, MARKING STENCIL, OPAQUE, FOR POROUS SURFACES (WOOD BOXES, FIBER CARTONS ETC.) |
| TT-S-711 Revision C:1978 | STAIN, OIL TYPE, WOOD, INTERIOR (NO S/S DOCUMENT) |
| MIL-P-7962 Revision D:1980 | PRIMER COATING, CELLULOSE-NITRATE MODIFIED ALKYD TYPE, CORROSION-INHIBITING, FAST-DRYING (FOR SPRAY APPLICATION OVER PRETREATMENT COATING) (NO S/S DOCUMENT) |
| MMM-A-134 Base Document:1970 | Adhesive, Epoxy Resin, Metal to Metal Structural Bonding |
| MMM-A-185 Revision B:1974 | ADHESIVE, RUBBER (FOR PAPER BONDING) |
| MIL-S-22805 Revision B:1993 | SPRAY KIT, SELF PRESSURIZED (S/S BY SAE-AS22805) |
| TT P 001952 : C | PAINT, TRAFFIC AND AIRFIELD MARKING, WATERBORNE |
| MIL-L-19538 Revision C:1970 | Lacquer, Acrylic Nitrocellulose, Camouflage (for Aircraft Use) (S/S by MIL-L-81352) |
| MIL-C-27251 Revision A:1971 | Cleaning Compound, Aircraft Surface, Low Temperature (No S/S Document) |
| MIL-L-758 Revision A:1962 | Lead Sterite (for Use in Ammunition) (No S/S Document) |
| MIL C 450 : C | COATING COMPOUND, BITUMINOUS SOLVENT TYPE, BLACK (FOR AMMUNITION) |
| MIL-S-11388 Revision D:1983 | SEALING MATERIAL FOR METAL CONTAINER SEAMS |
| MIL-I-46877 Base Document:1973 | Insulating Compound Kit, Electrical (No S/S Document) |
| MIL-DTL-5541 Revision F:2006 | Chemical Conversion Coatings on Aluminum and Aluminum Alloys |
| MMM-A-002048 Base Document:1978 | ADHESIVE, FIRE RESISTANT, THERMAL INSULATION (S/S BY MIL-A-3316) |
| AA-V-200 Revision B Interim Revision:1973 | Venetian Blinds (No S/S Document) |
| MIL H 55460 : A | HEADSET-MICROPHONE H-182()/PT |
| MMM-A-1058 Revision A:1975 | Adhesive, Rubber Base, (in Pressurized Dispensers) |
| MIL-C-81946 Base Document:1973 | Coating System, Thermal Insulation, Intumescent (No S/S Document) |
| TT-C-499 Revision A:1975 | COATING COMPOUND, CHEMICAL RESISTANT, CLEAR (S/S BY TT-C-542) |
| TT-C-530 Revision C:1995 | COATING COMPOUND, RUST INHIBITIVE, FISH OIL BASE (NO S/S DOCUMENT) |
| MIL-C-10464 Revision F:1990 | Cans, Hermetic Sealing, Metal, Light Gage, Tear-Strip Type |
| MIL-R-81261 Revision A:1970 | RAIN REPELLENT, GLASS WINDOW AND WINDSHIELD, FOR IN-FLIGHT APPLICATION (NO S/S DOCUMENT) |
| MIL-T-12879 Revision A:1966 | TREATMENTS, CHEMICAL, PREPAINT AND CORROSION INHIBITIVE, FOR ZINC SURFACES (S/S BY ASTM-D2092) |
| O-S-605 Revision D:1967 | SODIUM SILICATE SOLUTION (NO S/S DOCUMENT) |
| MIL-C-38334 Revision A:1971 | Corrosion Removing Compound, Prepaint, for Aircraft Aluminum Surfaces (S/S by SAE-AMS1640) |
| TT-C-542 Revision E:1978 | COATING, POLYURETHANE, OIL-FREE, MOISTURE-CURING (NO S/S DOCUMENT) |
| MIL-E-22118 Revision B:1974 | Enamel, Electrical-Insulating |
| MIL STD 795 : 0 | COLORS |
| ASTM F 716 : 2009-10 | TEST METHODS FOR SORBENT PERFORMANCE OF ABSORBENTS |
| MIL-D-51411 Base Document:1974 | Dye, Yellow, Thiodiphenyl-4,4\'-Diazo-Bis-Salicylic |
| TT-P-54 Revision C:1973 | Paint, Phosphorescent, Ready-Mixed (Non-Radioactive) (S/S by ASTM-E2072) |
| CGSB 1.160 : 1993 | LOW GLOSS ACRYLIC CELLULOSE NITRATE LACQUER |
| MIL-P-15169 Revision B:1963 | PIGMENT, CUPROUS OXIDE (NO S/S DOCUMENT) |
| MIL-E-20090 Revision A:1967 | Enamel, Alkyd, Striping, Brown (Formula No. 41) (S/S by TT-E-489 and FED-STD-595) |
| TT-P-52 Revision D:1973 | PAINT, OIL (ALKYD-OIL) WOOD SHAKES AND ROUGH SIDING (S/S BY TT-P-102) |
| TT-E-522 Revision A:1974 | ENAMEL, PHENOLIC, OUTSIDE (NO S/S DOCUMENT) |
| ASTM D 3323 : 1980 : R1988 : EDT 1 | Guide for Testing Interior Solvent-Thinned Flat Wall Paints (Withdrawn 1993) |
| TT-P-350 Revision B:1967 | PIGMENT, LAMPBLACK-DRY (S/S BY A-A-2922) |
| TT-S-178 Revision B:1972 | SEALER, SURFACE RENEWER FOR WOOD AND SEALER FOR CONCRETE (NO S/S DOCUMENT) |
| MIL-P-20088 Revision C:1986 | PRESERVATION SOLUTION CONCENTRATE, SONAR SEA CHEST (NO S/S DOCUMENT) |
| O-C-650 Revision B:1975 | CORRECTION FLUID, WHITE, OPAQUE, AND THINNER (NO S/S DOCUMENT) |
| MIL-C-7966 Revision C:1987 | Cloth, Coated, Rubber, Nylon Base (No S/S Document) |
| DOD-R-18708 Revision B:1990 | RUST-ARRESTING COATING, SHIPBOARD EXTERIOR, GRAY, NAVY FORMULA NO. 123G METRIC (NO S/S DOCUMENT) |
| DOD P 24647 : A (2) | PAINT, ANTIFOULING, SHIP HULL (METRIC) |
| MIL-R-53086 Base Document:1988 | RUST CONVERTER, METRIC (NO S/S DOCUMENT) |
| MIL-C-22325 Revision B:1988 | Color, Tinting, for Interior Nonflaming (Dry) Paints (Metric) (S/S by DOD-E-24607 and MIL-PRF-24596) |
| TT-E-545 Revision C:1986 | PRIMER COATING, INTERIOR, FOR WALLS AND WOOD (S/S BY A-A-2994) |
| MIL P 15183 : B NOTICE 1 | PAINT, EXTERIOR, ALKYD, GRAY, NO. 11 (FORMULA NO 109) (METRIC) |
| MIL-L-52043 Revision C:1972 | Lacquer, Semi Gloss, Cellulose Nitrate (No S/S Document) |
| MIL-P-47005 Base Document:1974 | PASTE, COLOR CONCENTRATE, EPOXY RESIN BASE (NO S/S DOCUMENT) |
| TT-P-81 Revision E:1973 | PAINT, OIL, ALKYD, READY MIXED EXTERIOR, MEDIUM SHADES (S/S BY TT-P-102) |
| MIL-M-43803 Base Document:1972 | Markings, Inked or Painted, Opaque, on Nonporous Surfaces (No S/S Document) |
| AASHTO M 248 : 1991 | SPECIFICATION FOR READY-MIXED WHITE AND YELLOW TRAFFIC PAINTS |
| MIL-P-28582 Base Document:1972 | PRIMER COATING, EXTERIOR, LEAD PIGMENT-FREE, (UNDERCOAT FOR WOOD, READY-MIXED, WHITE AND TINTS) (S/S BY A-A-2336) |
| MIL P 22636 : NOTICE 1 | PRIMER COATING; FOR RED FUMING NITRIC ACID RESISTANT PAINT |
| A-A-3058 Base Document:1996 | Paint, Interior, Fire Retardant (No S/S Document) |
| TT-B-1325 Revision D:2007 | Beads (Glass Spheres) Retro-Reflective |
| MIL-C-8514 Revision C:1967 | Coating Compound, Metal Retreatment, Resin-Acid (ASG) |
| MIL-DTL-19834 Revision C:2006 | Plates, Identification or Instruction, Metal Foil, Adhesive Backed General Specification for |
| MIL P 24647 : B | PAINT SYSTEM, ANTICORROSIVE & ANTIFOULING, SHIP HULL |
| TT-L-215 Revision D:1977 | LINSEED OIL, RAW (FOR USE IN ORGANIC COATINGS) (S/S BY A-A-379) |
| MIL-I-13857 Revision B:1983 | Impregnation of Metal Castings |
| MIL-H-9896 Revision C:1988 | Hardware, Universal Load Carrying Sling (No S/S Document) |
| MIL-P-63137 Revision B:1981 | Projectile, 8-Inch, HE, RA, M650 Warhead Section, Forward (No S/S Document) |
| MIL E 24763 : A | ENAMEL, EMULSION TYPE, FOR SHIPBOARD USE |
| MIL STD 194 : A NOTICE 2 | SYSTEM FOR PAINTING AND FINISHING FIRE-CONTROL MATERIEL |
| TT-P-1511 Revision B:1981 | PAINT, LATEX (GLOSS AND SEMIGLOSS, TINTS AND WHITE) (FOR INTERIOR USE) (S/S BY TT-P-29) |
| MIL C 4556 : E | COATING KIT, EPOXY, FOR INTERIOR OF STEEL FUEL TANKS |
| MIL-S-12935 Revision D:1973 | SEALER, SURFACE, FOR KNOTS (NO S/S DOCUMENT) |
| MIL R 46073 : B | REMOVER, PAINT; ORGANIC, SOLVENT TYPE |
| AA-B-605 Revision A:1973 | Box, Filing, Steel |
| GG-M-1262 Revision A:1972 | Marker, Tube Type White |
| MIL C 87937 : B | CLEANING COMPOUND, AEROSPACE EQUIPMENT |
| SAE AMS1376B | Remover, Epoxy Paint Acid-Type, Thickened |
| TT-D-376 Revision D:1975 | Dipentene, Technical (for Use in Organic Coatings) (No S/S Document) |
| L-P-1035 Revision A:1974 | PLASTIC MOLDING MATERIAL, VINYL CHLORIDE POLYMER AND VINYL CHLORIDE-VINYL ACETATE COPOLYMER, RIGID (S/S BY ASTM-D1784) |
| MIL-C-22608 Revision B:1966 | Compound, Insulating, High, Temperature (No S/S Document) |
| TT-V-109 Revision C:1978 | VARNISH, INTERIOR, ALKYD-RESIN (S/S BY A-A-1788) |
| TT-E-496 Revision B:1967 | ENAMEL, HEAT-RESISTING (400 DEG. F.), BLACK (S/S BY A-A-3054) |
| MIL-C-47200 Base Document:1974 | Compound, Coating, Polyurethane, Electrical Insulating, Room Temperature Cure (S/S by MIL-I-46058) |
| SAE AMS3146 | Coating, Interior Aircraft Cabin Low Heat and Smoke Release |
| TT-T-266 Revision D:1976 | THINNER, DOPE AND LACQUER (CELLULOSE NITRATE) (S/S BY A-A-857) |
| MIL-P-48322 Revision B:1981 | Projectile, 8 Inch HE, RA, M650 AFT Warhead Section and Strippable Coating Assembly (No S/S Document) |
| MIL-P-48323 Revision C:1984 | Projectile, 8 Inch, HE, RA, M650 Rocket Motor Body Assembly (No S/S Document) |
| TT-P-28 Revision H:2007 | Coating, Heat Resisting |
| ASTM D 4712 : 1987 : REV A : R2001 | Standard Guide for Testing Industrial Water-Reducible Coatings |
| MIL-F-71021 Base Document:1991 | Fuze, Proximity, Artillery: M732A2 (Unboostered) |
| SAE AMSC81562A | Coatings, Cadmium, Tin-Cadmium and Zinc (Mechanically Deposited) |
| SAE AMSA8625A | Anodic Coatings for Aluminum and Aluminum Alloys |
| ASTM E 903 : 2012 | Standard Test Method for Solar Absorptance, Reflectance, and Transmittance of Materials Using Integrating Spheres |
| GOST 849:2018 | Primary nickel. SpecificationsE |
| BS EN 2536:1995 | Hard anodizing of aluminium alloys |
| EN 2536:1995 | Aerospace series - Hard anodizing of aluminium alloys |
| A-A-3183 Base Document:2000 | Paint, Latex, Exterior, (for Wood and Masonry) (No S/S Document) |
| MIL-C-18480 Revision B:1982 | Coating Compound, Bituminous, Solvent, Coal-Tar Base |
| SAE AMS2438E | Plating, Chromium Thin, Hard, Dense Deposit |
| MIL C 85285 : C | |
| MIL-W-15234 Revision C:1988 | WHITING (S/S BY ASTM-D1199) |
| MIL-C-81947 Revision A:1975 | Coating Compound, Thermal Insulation, Three-Component, Intumescent (No S/S Document) |
| MIL-R-81294 Revision D:1990 | Remover, Paint, Epoxy, Polysulfide, and Polyurethane Systems |
| MIL-V-13811 Revision D:1976 | Varnish, Waterproofing, Electrical, Ignition (No S/S Document) |
| MIL-C-47175 Revision A:1980 | Compound, Polyurethane, for Conformal Coating of Electronic Circuitry |
| AA-C-001770 Revision A Interim Revision:1978 | CABINET, WARDROBE AND STORAGE, CONTEMPORARY STYLE, STEEL, GENERAL OFFICE (S/S BY A-A-2113) |
| TT-E-491 Revision C:1977 | ENAMEL, GLOSS, SYNTHETIC (FOR METAL AND WOOD FURNITURE) (S/S BY TT-E-2784) |
| PPP-C-1337 Revision B:1976 | Containers, Composite; (Steel Drum with Polyethylene Insert) (S/S by A-A-58020) |
| MIL P 52977 : 0 | PRIMER COATING, ALKYD, ANTICORROSIVE, LEAD AND CHROMATE FREE |
| TT-T-390 Revision A:1971 | TINTING MEDIUM, CONCENTRATE GENERAL PURPOSE (S/S BY A-A-3108) |
| MIL-C-47116 Revision A:1979 | Coating, Epoxy/Amine (No S/S Document) |
| TT-C-001951 Base Document:1976 | COATING, CLEAR (SATIN FINISH), POLYURETHANE, LATEX, FOR INTERIOR USE (NO S/S DOCUMENT) |
| MIL D 5551 : B | DOPE, CELLULOSE ACETATE BUTYRATE, PIGMENTED, GLOSS |
| MIL L 81352 : A | LACQUER, ACRYLIC (FOR NAVAL WEAPONS SYSTEMS) |
| MIL-T-81838 Base Document:1971 | Tank, Fuel, Aircraft, Auxiliary External 300 Gallon, Type AERO-1D |
| MIL-PRF-81904 Revision C:2011 | Coating Compound, Thermal-Insulation |
| PPP-P-704 Revision E:1981 | Pails, Metal: (Shipping, Steel, 1 through 12 Gallons) |
| MIL-I-7171 Revision D:1993 | Insulation Blanket, Thermal-Acoustical (S/S by SAE-AMS-I-7171) |
| MIL-B-8943 Revision A:1966 | Bearing, Journal-Plain and Flanged, TFE Lined (S/S by SAE-AS8943) |
| DOD-E-699 Revision D:1978 | ENAMEL, EXTERIOR, DECK, GRAY (FORMULA NO. 20) (METRIC) (S/S BY DOD-E-24635 & FED-STD-595) |
| DOD-E-698 Revision C:1978 | ENAMEL, ALKYD, DECK, BLACK (FORMULA NO. 24) (METRIC) (S/S BY DOD-E-24635 & FED-STD-595) |
| MIL-R-81903 Revision A:1977 | Remover, Acid Activated, for Amine-Cured Epoxy Coating Systems |
| MMM-A-1754 Base Document:1973 | ADHESIVE AND SEALING COMPOUND, EPOXY, METAL FILLED |
| AA-D-001918 Base Document:1975 | DESKS, FLAT TOP, STEEL, CONTEMPORARY STYLE (S/S BY A-A-2095) |
| MIL-S-48112 Base Document:1972 | SEALING COMPOUND BUTYL RUBBER SEALANT (FOR USE IN AMMUNITION) (NO S/S DOCUMENT) |
| MIL-C-82407 Base Document:1968 | Coating, Epoxy, for Steel Structures (No S/S Document) |
| MIL-P-6884 Revision F:1973 | PAINT, CAMOUFLAGE OR TEMPORARY IDENTIFICATION, SOLVENT REMOVABLE (NO S/S DOCUMENT) |
| SAE AMS1659 | COATING, SOIL BARRIER Semi-Permanent |
| MIL-DTL-81706 Revision B:2004 | Chemical Conversion Materials for Coating Aluminum and Aluminum Alloys |
| TT-P-1536 Revision A:1975 | PLUMBING FIXTURE SETTING COMPOUND (S/S BY A-A-3110) |
| TT-P-2760 Revision A:1994 | Primer Coating: Polyurethane, Elastomeric, High-Solids |
| TT-E-529 Revision G:1988 | ENAMEL, ALKYD, SEMIGLOSS, LOW VOC CONTENT (S/S BY A-A-2962) |
| MIL-P-14829 Base Document:1968 | Projectile, 4.2 Inch Tactical CS, XM633 Metal Parts Assembly |
| TT-L-190 Revision D:1976 | LINSEED OIL, BOILED, (FOR USE IN ORGANIC COATING) (S/S BY A-A-371) |
| MIL-S-50080 Revision A:1961 | SCREEN, FLOCKED GRID (NO S/S DOCUMENT) |
| SAE AMS2473H | Chemical Film Treatment for Aluminum Alloys General Purpose Coating |
| DOD-P-15146 Revision B:1977 | PAINT, EXTERIOR, DULL BLACK (FORMULA NO. 104) (METRIC) (S/S BY DOD-E-24635, FED-STD-595) |
| TT-I-1795 Revision A:1973 | Ink, Marking, Stencil, Opaque (Porous and Non-Porous Surfaces) (S/S BY A-A-208) |
| MIL P 47115 : A | PAINT, EPOXY, ABRASION, HEAT AND CORROSION RESISTANT |
| MMM A 131 : A NOTICE 1 | ADHESIVES: GLASS-TO-METAL (FOR BONDING OF OPTICAL ELEMENTS) |
| MIL-B-52598 Revision B:1969 | Bag, Sand, Acrylic (S/S by A-A-52140) |
| TT S 001543 : A | SEALING COMPOUND, SILICONE RUBBER BASE (FOR CALKING, SEALING, AND GLAZING IN BUILDINGS AND OTHER STRUCTURES) |
| MMM-A-105 Base Document:1967 | Adhesive and Sealing Compounds Cellulose Nitrate Base, Solvent Type (S/S by A-A-529) |
| TT-P-95 Revision C:1975 | PAINT, RUBBER, FOR SWIMMING POOLS AND OTHER CONCRETE AND MASONRY SURFACES (S/S BY A-A-3120) |
| TT-I-535 Revision D:1972 | INK, DUPLICATING MACHINE STENCIL, PASTE, BLACK (S/S BY A-A-206) |
| MIL-P-81351 Revision A:1976 | PEROXIDE, METHYL ETHYL KETONE (S/S BY MIL-P-87938) |
| MMM-A-189 Revision C:1985 | ADHESIVE, SYNTHETIC-RUBBER, THERMOPLASTIC, GENERAL-PURPOSE |
| TT-I-1788 Base Document:1972 | INK, DUPLICATING, LITHOGRAPHIC PROCESS KIT (NO S/S DOCUMENT) |
| MIL-W-81319 Revision A:1967 | WHEELS, ABRASIVE: NON-WOVEN NYLON, RESIN REINFORCED (S/S BY A-A-59292) |
| TT-A-516 Revision D:1962 | Amyl Alcohol: Secondary ( Use ASTM-D391) |
| MIL-C-81350 Base Document:1966 | Catechol, 4-Tertiary Butyl (No S/S Document) |
| MIL-P-14553 Revision C:1972 | PRIMER COATING, DIPPING AUTOMOTIVE (NO S/S DOCUMENT) |
| TT-P-59 Revision E:1975 | PAINT, READY MIXED, INTERNATIONAL ORANGE (NOT FOR RESIDENTIAL USE) (NO S/S DOCUMENT) |
| TT-C-555 Revision B:1973 | COATING, TEXTURED (FOR INTERIOR AND EXTERIOR MASONRY SURFACES) (NO S/S DOCUMENT) |
| MIL P 23377 : G | PRIMER COATING, EPOXY, HIGH SOLIDS |
| TT-C-535 Revision B:1972 | COATING, EPOXY, TWO COMPONENT, FOR INTERIOR USE ON METAL, WOOD, WALLBOARD, PAINTED SURFACES CONCRETE AND MASONRY (S/S BY A-A-3126) |
| TT-S-00227 Revision E:1969 | SEALING COMPOUND, ELASTOMERIC TYPE, MULTI-COMPONENT (FOR CALKING, SEALING, AND GLAZING IN BUILDINGS AND OTHER STRUCTURES) (S/S BY A-A-1556) |
| MIL-W-13518 Revision C:1967 | Wood Preservative: Tetrachlorophenoland Pentachlorophenol Surface Sealing Compound (No S/S Document) |
| TT-P-32 Revision B:1978 | PAINT, BLACKBOARD COATING (NO S/S DOCUMENT) |
| MIL-C-53050 Base Document:1985 | Camouflage Kit, Ground Launched Cruise Missile (GLCM) System (No S/S Document) |
| AASHTO M 300 : 2003 | SPECIFICATION FOR INORGANIC ZINC-RICH PRIMER |
| MIL V 12276 : D | VARNISH, PHENOLIC, BAKING |
| MIL-PRF-85582 Revision E:2012 | PRIMER COATINGS: EPOXY, WATERBORNE |
| MIL-I-24092 Revision D:1993 | Insulating Varnishes and Solventless Resins for Application by the Dip Process |
| MIL P 9503 : B | PAINT, RUBBER, RIGID AND AIR SUPPORTED RADOME |
| MIL-L-10287 Revision B:1976 | Lacquer, Cellulose Nitrate for Identification of Small Arms Ammunition |
| A-A-3108 Revision B:2004 | Tinting Medium, Enamel: Universal Colorants |
| MIL E 15145 : C | ENAMEL, ZINC DUST PIGMENTED, FRESH WATER TANK PROTECTIVE, FORMULA NO. 102 |
| MIL-L-51131 Revision A:1974 | Lithium Stearate (No S/S Document) |
| TT S 00230 : C | SEALING COMPOUND, ELASTOMERIC TYPE SINGLE COMPONENT (FOR CALKING, SEALING, AND GLAZING IN BUILDINGS AND OTHER STRUCTURES) |
| TT B 848 : B | BUTYL ALCOHOL, SECONDARY (FOR USE IN ORGANIC COATINGS) |
| MIL-F-51068 Revision F:1986 | Filters, Particulate (High-Efficiency Fire Resistant) (S/S by ASME-AG1) |
| MIL A 48611 : A | ADHESIVE SYSTEM, EPOXY-ELASTOMERIC, FOR GLASS TO METAL |
| MIL-A-87134 Base Document:1978 | ADHESIVE, CONTACT, FOR CUSTOM FIT HELMET LINERS |
| MIL-C-15179 Revision B:1971 | Castor Oil, Dehydrated (No S/S Document) |
| TT S 227 : B NOTICE 1 | SEALING COMPOUND, RUBBER BASE, TWO COMPONENT (FOR CALKING, SEALING, & GLAZING IN BUILDING CONSTRUCTION) |
| MIL-R-47025 Revision A:1991 | Resin, Casting, Fire Retardant, Epoxy Base |
| MIL-PRF-32587 Base Document:2018 | Remover, Paint, Hap-Free, Neutral |
| AASHTO M 249 : 2012 | SPECIFICATION FOR WHITE AND YELLOW REFLECTIVE THERMOPLASTIC STRIPING MATERIAL (SOLID FORM) |
| MIL-T-49110 Base Document:1977 | Telephone Set TA-838()/TT |
| TT-P-1046 Revision A:1975 | PRIMER COATING, ZINC DUST, CHLORINATED RUBBER, (FOR STEEL AND GALVANIZED SURFACES) (S/S BY TT-P-641) |
| MIL L 46138 : 0 | LACQUER, LUSTRELESS, ACRYLIC NITROCELLULOSE, SOLAR HEAT REFLECTING, OLIVE DRAB |
| L-T-776 Revision A:1966 | Tray, Service (Laminated Fiber Glass, Polyester Resin) (S/S by A-A-2594) |
| MIL-C-52933 Base Document:1977 | Camouflage Screening Systems, Modular, Lightweight, Synthetic-Snow (S/S by MIL-C-53004) |
| GG-P-001428 Revision A:1975 | Preventive Dentistry Kit, Patient (S/S BY A-A-50871) |
| TT-S-176 Revision E:1974 | SEALER, SURFACE, VARNISH TYPE, FLOOR, WOOD OR CORK (S/S BY A-A-2335) |
| GG-C-00590 Revision B:1970 | Copyholder, Typist\'s (No S/S Document) |
| MIL-C-43460 Revision B:1979 | Coatings, Lusterless, for Helmets and Liners (No S/S Document) |
| MIL-P-16406 Revision A:1974 | PAINT, BLACK, HIGH-GLOSS, QUICK DRYING (NO S/S DOCUMENT) |
| TT-P-001984 Base Document:1975 | PRIMER COATING, LATEX BASE, EXTERIOR, UNDERCOAT FOR WOOD, WHITE AND TINTS (NO S/S DOCUMENT) |
| MIL-V-13750 Revision B:1972 | Varnish, Phenol-Formaldehyde, Clear and Aluminum Pigmented |
| MIL-P-50569 Revision C:1982 | Projectile, 155MM, HE, Rocket Assisted M549 Series, Motor Body Bonding Assembling For |
| MIL P 14458 : A NOTICE 1 | PAINT, RUBBER, RED FUMING NITRIC ACID RESISTANT |
| MIL-PRF-87937 Revision D:2001 | Cleaning Compound, Aerospace Equipment |
| DOD-PRF-24648 Base Document:1985 | Primer Coating, Zinc Dust Pigmented for Exterior Steel Surfaces (Metric) (S/S by A-A-59745) |
| SS-W-110 Revision C:1972 | WATER REPELLENT, COLORLESS, SILICONE RESIN BASE (NO S/S DOCUMENT) |
| TT-E-001384 Base Document:1979 | ENAMEL, GLOSS, SYNTHETIC (FOR METAL EQUIPMENT) (S/S BY TT-E-2784 AND A-A-2787) |
| MIL-DTL-12276 Revision E:2006 | Varnish, Phenolic, Baking |
| MIL-P-60814 Base Document:1967 | Projectile, AP-T, 90mm, M318A1 Metal Parts |
| ASTM D 3218 : 2007 : R2012 | Standard Specification for Polyolefin Monofilaments |
| MIL-P-24380 Revision B:1989 | Paint, Anchor Chain, Solvent Type, Gloss Black (Metric)(S/S by MIL-PRF-24635) |
| TT B 838 : A | BUTYL ACETATE, NORMAL (FOR USE IN ORGANIC COATINGS) |
| TT-V-81 Revision G:1978 | VARNISH, MIXING, FOR ALUMINUM PAINT (NO S/S DOCUMENT) |
| MIL-PRF-24647 Revision E:2013 | Paint System, Anticorrosive and Antifouling, Ship Hull |
| TT-E-1593 Revision B:1974 | ENAMEL, SILICONE ALKYD COPOLYMER, GLOSS (FOR EXTERIOR AND INTERIOR USE) (NO S/S DOCUMENT) |
| TT-P-30 Revision E:1977 | PAINT, ALKYD, ODORLESS, INTERIOR, FLAT, WHITE AND TINTS (S/S BY TT-P-29) |
| MIL-V-13497 Revision A:1962 | Varnish, Impregnating, Electrical-Insulating (for Fire Control Instruments) (S/S by NEMA-RE2) |
| MIL-P-8793 Revision A:1961 | PAINT, (GLOSS AND NONSPECULAR), FOR USE ON ELASTOMERIC PIGMENTED FILM (NO S/S DOCUMENT) |
| SAE AMS3144 | Primer, Anodic Electrodeposition for Aircraft Applications |
| ASTM B 635 : 2000 | Standard Specification for Coatings of Cadmium-Tin Mechanically Deposited |
| ASTM B 449 : 1993 : R2010 : EDT 1 | Standard Specification for Chromates on Aluminum |
| ASTM B 921 : 2008 | Standard Specification for Non-hexavalent Chromium Conversion Coatings on Aluminum and Aluminum Alloys |
| ASTM B 635 : 2000 : R2015 | Standard Specification for Coatings of Cadmium-Tin Mechanically Deposited |
| ASTM D 3322 : 1982 : R2017 | Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal |
| ASTM D 4712 : 1987 : REV A : R2005 | Standard Guide for Testing Industrial Water-Reducible Coatings (Withdrawn 2014) |
| ASTM E 1797 : 2012 : R2017 : EDT 1 | Standard Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
| ASTM B 449 : 1993 : R2015 | Standard Specification for Chromates on Aluminum |
| IEC PAS 61249-8-1:2014 | Qualification and performance of electrical insulating compound for printed wiring assemblies |
| 13/30295424 DC : 0 | BS IEC/PAS 61249-8-1 ED.1 - QUALIFICATION AND PERFORMANCE OF ELECTRICAL INSULATING COMPOUND FOR PRINTED WIRING ASSEMBLIES |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : All end users must be registered with an Account prior to user licenses being assigned.