FED-STD-102 Revision B:1963
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
PRESERVATION, PACKAGING, AND PACKING LEVELS
Available format(s)
PDF
Superseded date
01-06-1993
Superseded by
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.Establishes levels of preservation and packaging and levels of packing as guidelines for contracting officers and procurement agents in procurement of supplies and equipment.
| DocumentType |
Standard
|
| Pages |
3
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Superseded
|
| SupersededBy |
| AA C 30 : D | CABINET, KEY, (BOXES AND RACKS METAL AND IDENTIFICATION SYSTEMS) |
| ASTM B 127 : 2005 : R2009 | Standard Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, and Strip |
| MIL-I-82847 Base Document:1990 | IGNITION COMPOUND, MAGNESIUM-POLYTETRAFLUOROETHYLENE |
| TT-I-735 Revision A:1963 | ISOPROPYL ALCOHOL |
| DDD-P-0053 Revision C:1963 | PAD, ABDOMINAL (DRAINAGE DRESSING, COMBINATION) |
| L-F-475 Revision A:1965 | FLOOR COVERING VINYL, SURFACE (TILE AND ROLL), WITH BACKING |
| MIL-C-85254 Base Document:1981 | CHARGE, LINEAR SHAPED |
| GG-S-636 Revision B:1957 | SPLINT, WIRE, LADDER |
| GGG-F-570 Revision A:1966 | FORCEPS, SHEET HOLDER |
| TT-L-50 Revision G:1976 | LACQUER, NITROCELLULOSE, ACRYLIC AND ACRYLIC BUTYRATE, AEROSOL (IN PRESSURIZED DISPENSERS) |
| GGG-C-291 Revision A:1963 | CHALK LINE AND REEL (SELF-CHALKING) |
| MIL A 23941 : A | ADHESIVE, EPOXY TYPE, TWO PART |
| GGG-H-496 Revision C:1961 | HOE; GARDEN, MORTAR, AND MORTAR MIXING |
| GGG-E-00930 Base Document:1963 | EXTRACTOR, ELECTRON TUBE (TONG TYPE) |
| GG-T-380 Base Document:1958 | |
| AA-O-00235 Base Document:1962 | OFFICE FURNITURE, STEEL, SECTIONAL |
| GGG-P-446 Revision A:1964 | PLATE, LAPPING |
| SS-C-466 Revision E:1964 | CLOTH, THREAD, AND TAPE-ASBESTOS |
| AA-V-200 Revision A:1965 | VENETIAN BLINDS |
| NNN-C-688 Base Document:1962 | CRUCIBLE, IGNITION LABORATORY METAL |
| GGG-P-655 Revision B:1964 | PRICKER, SAILMAKER'S |
| GG-S-921 Revision B:1958 | SYRINGE, LUER, (ALL-GLASS) |
| NNN-D-345 Revision A:1963 | DISH EVAPORATING PLATINUM |
| MIL-D-82687 Base Document:1980 | DEVICE, ARMING FIRING, ROCKET MOTOR MARK 298 MOD O |
| L-F-001641 Base Document:1971 | FLOOR COVERING TRANSLUCENT OR TRANSPARENT VINYL SURFACE WITH BACKING |
| MIL F 85406 : 0 | FUSE SYSTEM, JOINT SERVICE ELECTRONIC BOMB FMU-139/B |
| MIL-C-85257 Base Document:1981 | CORD ASSEMBLY, DETONATING |
| QQ-W-345 Revision B:1965 | WIRE, ELECTRICAL, STEEL, COPPER COVERED |
| GG-B-636 Revision B:1960 | BRACKET, X-RAY FILM HANGER, RADIOGRAPHIC, STORAGE |
| GGG-C-00413 Base Document:1964 | CLAMPING TOOL, STRAP BAND, HOSE |
| TT-F-325 Revision A:1965 | FILLER, ENGRAVING, STAMPED MARKING |
| GGG-N-185 Revision A:1964 | NEEDLE, CABLE LACING |
| AA-T-636 Revision A:1957 | TRAY, DESK; AND SUPPORT SET, STACKING, DESK TRAY |
| GGG-C-415 Revision A:1965 | CLAW, TACK |
| GG-B-89 Revision B:1958 | BAND, ABRASIVE (SILICON-CARBIDE), FOR DENTAL LATHES |
| MIL-P-50769 Base Document:1973 | PRIMER, PERCUSSION, CCU-20/A & PRIMER, PERCUSSION, CCU-21/A |
| GGG-E-950 Revision A:1988 | EXTRACTOR, STUFFING BOX AND PUMP PACKING (AND TAMPER); AND EXTRACTOR, LANTERN GLAND |
| MIL-D-82490 Base Document:1967 | DRIVER, GAS OPERATED MARK 8 MOD 0 |
| GGG-A-926 Revision C:1961 | AX, (SINGLE BIT, DOUBLE BIT, PICK HEAD AND MATTOCK HEAD) |
| GGG-S-0075 Revision A:1966 | SAW SET, HAND |
| GGG M 00100 : 0 | MARLINESPIKE (MANILA ROPE) |
| ASTM B 127 : 2005 : R2014 | Standard Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, and Strip |
| ASTM B 127 : 2005 | Standard Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, and Strip |
| ASTM B 163 : 2011 : R2017 | Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes |
| GG S 001090 : A | SUCTION AND PRESSURE APPARATUS, SURGICAL, EXPLOSION-PROOF, SINGLE COMPRESSOR, MOBILE, 110 VOLT, 60 CYCLE, AC: (FOR EAR, NOSE AND THROAT PROCEDURES) |
| NNN-O-001191 Base Document:1966 | OVEN LABORATORY |
| L-P-509 Revision A:1965 | PLASTIC SHEET, ROD AND TUBE, LAMINATED, THERMOSETTING |
| MIL-B-85464 Base Document:1981 | BOOSTER, FUSE, MARK 38 MOD 2 |
| MIL-B-85599 Base Document:1983 | BOOSTER, FUSE, MARK 60 MOD 2 |
| JJJ A 711 : D NOTICE 1 | ASPARAGUS, CANNED |
| MIL-P-85710 Base Document:1986 | PARACHUTES, PERSONNEL, EMERGENCY ESCAPE GENERAL DESIGN SPECIFICATION FOR |
| TT-S-735 Revision A:1988 | STANDARD TEST FLUIDS, HYDROCARBON |
| AA-D-195 Revision B:1961 | DESK, FLAT TOP, STEEL, CONFERENCE TYPE |
| HHH-S-616 Revision C:1957 | SPINACH PLANTS, FRESH |
| TT-T-306 Revision E:1993 | THINNER, SYNTHETIC RESIN, ENAMELS |
| QQ-T-830 Revision A:1961 | TUBE, STEEL, (CARBON, MECHANICAL; SEAMLESS AND WELDED) |
| GG-K-508 Revision B:1957 | KNIVES, DENTAL: CRAFTSMAN'S, COMPOUND, AND PLASTER |
| GG-R-571 Revision B:0194 | ROLLER, BANDAGE |
| MIL-P-82534 Base Document:1968 | PROGRAMMER, RANGE AND AIRFRAME SEPARATION MARK 3 MOD 1 |
| ASTM B 865 : 2004 : R2010 | Standard Specification for Precipitation Hardening Nickel-Copper-Aluminum Alloy (UNS N05500) Bar, Rod, Wire, Forgings, and Forging Stock |
| GG-V-350 Base Document:1990 | VIEWER, DENTAL RADIOGRAPHIC FILM, 110 VOLT, AC-DC |
| W-B-411 Revision A:1961 | BLASTING MACHINE, GALVANOMETER, BLASTING, RESISTOR ASSEMBLY |
| QQ-A-371 Revision F:1971 | ALUMINUM ALLOY INGOT (FOR REMELTING) |
| UU-P-00175 Base Document:1965 | PAPER, CORRECTION |
| JJJ-A-20 Base Document:1958 | ACACIA, TECHNICAL (GUM ARABIC) |
| P-D-240 Base Document:1960 | DETERGENT, SURGICAL |
| GG-A-616 Revision E:1978 | APPLICATOR, DISPOSABLE |
| GGG-T-870 Revision A:1957 | TWEEZERS, CRAFTSMAN'S |
| GGG-W-301 Revision B:1963 | WHEEL, BUFFING AND POLISHING |
| GGG-P-00475 Base Document:1964 | PLIERS, JEWELLERS |
| GGG-W-643 Revision B:1963 | WRENCH, PIPE, INTERNAL-GRIPPING |
| GGG-H-135 Base Document:1966 | HAWK, PLASTERER'S |
| GG-W-101 Revision B:1957 | WASHERS, BEDPAN AND URINAL |
| GGG-F-00340 Base Document:1965 | FILE, ROTARY |
| GGG A 00450 : 1964 | ALIGNMENT TOOL, ELECTRIC EQUIPMENT |
| P-P-105 Revision C:1970 | PAPER, ABRASIVE, FLINT |
| UU-B-368 Revision B:1992 | BINDER, LOOSE-LEAF, SPRING BACK |
| GG-S-604 Base Document:1960 | SPECULUM, VAGINAL |
| DD-S-720 Revision A:1960 | STOPCOCK, LABORATORY APPARATUS, TAPER-GROUND |
| GGG S 00278 : A (4) | SHEARS AND SCISSORS |
| TT I 531 : C NOTICE 1 | INK, DRAWING, WATERPROOF, COLORED (S/S BY A-A-2331) |
| TT-S-708 Revision A:1962 | STAIN, OIL, SEMI-TRANSPARENT, WOOD, EXTERIOR |
| JJ-B-178 Revision B:1957 | BELT, ROUND (DENTAL ENGINES) |
| GGG-A-151 Revision D:1964 | ADZ |
| L-P-387 Revision A:1963 | PLASTIC SHEET, LAMINATED, THERMOSETTING (FOR DESIGNATION PLATES) |
| DDD-B-40 Revision A:1958 | BANDAGE, CANTON FLANNEL |
| C-N-200 Revision A:1961 | NEATS FOOT OIL |
| GGG-B-376 Revision B:1963 | BIT, SCREW-DRIVER, (TAPERED SQUARE SHANK, FLAT TIP AND CROSS TIP) |
| ASTM B 167 : 2011 | Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Seamless Pipe and Tube |
| ASTM B 865 : 2004 | Standard Specification for Precipitation Hardening Nickel-Copper-Aluminum Alloy (UNS N05500) Bar, Rod, Wire, Forgings, and Forging Stock |
| GGG-D-326 Revision C:1964 | DIGGER; POSTHOLE, HINGED |
| GGG-K-471 Revision C:1963 | KNIFE, DRAW |
| GGG-B-121 Revision B:1964 | BAR, SINE; PLATE SINE (AND FIXTURES) |
| MIL F 23938 : A | FERRIC OXIDE |
| GG-D-441 Revision B:1957 | DISPENSER, STRIP, DENTAL |
| GGG W 631 : B INT AMD (5) | WRENCH ADJUSTABLE OPEN END AUTO AND MONKEY |
| SS-C-646 Revision B:1969 | CRAYON, MARKING, LUMBER |
| GGG-B-351 Revision B:1963 | BIN, STORAGE AND DISPLAY, ROTARY |
| U-C-115 Revision B:1958 | CAPSULE, GELATIN |
| QQ-B-728 Base Document:1961 | BRONZE MANGANESE; ROD, SHAPES, FORGINGS, AND FLAT PRODUCTS (FLAT WIRE, STRIP, SHEET, BAR, AND PLATES) |
| MIL-G-82405 Base Document:1966 | GLOVES, CLOTH, JERSEY, WORK, POLYVINYL IMPREGNATED |
| GGG-N-398 Revision A:1963 | NUT RUNNER, PNEUMATIC, PORTABLE |
| GGG-H-131 Revision C:1957 | HATCHET (CLAW, HALF, LATHING, BROAD AND BARREL) |
| MIL-A-85317 Base Document:1980 | ACTUATOR, ELECTRO-PYROTECHNIC, LINEAR, ATU-89/B |
| MIL-S-82492 Base Document:1967 | SWITCH, INTEGRATOR MARK 62 MOD 2 |
| MIL-I-85487 Base Document:1981 | IGNITER, ROCKET MOTOR, MARK 297 MOD 1 |
| MIL-C-85253 Base Document:1981 | CODE DETONATING |
| MIL-F-85596 Base Document:1983 | FIN, RETARDER, AIR INFLATABLE BSU-85/B |
| GG-I-271 Revision C:1964 | IGNITER, FRICTION, OXYACETYLENE-TORCH |
| SS-S-210 Revision A:1975 | SEALING COMPOUND, PREFORMED PLASTIC FOR EXPANSION JOINTS & PIPE JOINTS |
| GGG-R-00620 Base Document:1965 | ROLLER, HAND (RUBBER ROLLER) |
| G-M-656 Revision A:1958 | MOUNTS, RADIOGRAPHIC FILM, DENTAL |
| AA C 0010 : B | CABINET, BEDSIDE, METAL, HOSPITAL TYPE |
| GG-P-181 Revision C:1963 | PENHOLDERS (WRITING) |
| MIL A 52242 : A | ALUMINUM ALLOY EXTRUDED ROD, BAR, AND SHAPES, 7001 |
| MIL-R-7705 Revision B:1975 | RADOME, GENERAL SPECIFICATION FOR |
| MIL-P-70343 Base Document:1990 | PACKING, FIBERGLASS, ROPE & WICK |
| NNN R 560 : A | ROD STIRRING LABORATORY |
| FF-P-416 Revision E:1963 | PIN, SAFETY |
| NNN G 698 : C | GRID WIRE GAUZE LABORATORY |
| GGG-T-0030 Base Document:1965 | TACKER, STAPLE (COMPRESSION TYPE, MANUALLY OPERATED FOR ROUND CROWNED STAPLES) AND STAPLE, TACKER (ROUND CROWNED) |
| GGG-S-00275 Base Document:1965 | SHEARS, BARBERS |
| FF-B-195 Base Document:1960 | BEARING, SLEEVE, (BRONZE, PLAIN OR FLANGED) |
| MIL-C-85300 Base Document:1982 | COOLER, CRYOGENIC DETECTOR |
| DDD-D-626 Revision A:1959 | DRAPE, SURGICAL, CLOTH |
| GG-C-121 Base Document:1959 | CANNULA, BRAIN, FRAZIER |
| GGG-T-563 Revision A:1958 | TOOLS, BLACKSMITHS': CHISELS, FLATTERS, FULLERS, SET HAMMERS, HARDIES, BOLT HEADING TOOLS, PUNCHES, AND SWAGES |
| GGG-D-671 Revision D:1964 | DRILL; HAND, AND PUSH |
| GG C 225 : NOTICE 1 | CHEST, X-RAY FILM PROTECTIVE |
| GG-N-350 Base Document:1961 | NIPPER, INGROWN TOENAIL |
| GGG-S-793 Revision A:1964 | STRIPPER, WIRE, BENCH |
| MIL-C-24723 Base Document:1989 | CASTINGS, NICKEL-COPPER ALLOY |
| GGG-P-791 Revision C:1961 | PULLERS, NAIL, HAND |
| GG-A-614 Base Document:1960 | APPLICATOR, METAL |
| GGG-T-350 Revision B:1966 | TIRE LOCK RING TOOL, TIRE REMOVING TOOL, AND TIRE IRON |
| GG-S-928 Revision B:1950 | |
| QQ-M-44 Revision B:1964 | MAGNESIUM ALLOY PLATE AND SHEET (AZ31B) |
| L-P-525 Revision A:1958 | PLASTIC STRIP, DENTAL MATRIX |
| NNN-S-750 Base Document:1962 | STAND LABORATORY APPARATUS SUPPORT |
| QQ-Z-301 Revision C:1964 | ZINC SHEET AND STRIP |
| DDD-C-641 Revision B:1964 | CURTAIN, AIR PORT, CURTAIN, DOORWAY AND CURTAIN FIXTURES |
| TT-E-776 Revision B:1960 | ETHYLENE GLYCOL MONOBUTYL ETHER (FOR USE IN ORGANIC COATINGS) |
| L-F-36 Revision C:1963 | FACESHIELD, INDUSTRIAL |
| GGG-T-00559 Base Document:1964 | TOOL KIT, LEATHERCRAFT |
| DD-T-733 Base Document:1960 | TUBE, HYPODERMIC NEEDLE PROTECTING |
| GG-S-945 Revision A:1959 | SYRINGE AND NEEDLE, DISPOSABLE, HYPODERMIC, STERILE, SINGLE INJECTION |
| ASTM B 167 : 2011 : R2016 | Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Seamless Pipe and Tube |
| ASTM B 163 : 2011 : EDT 2 | Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes |
| SAE AMS I 538 : 2016 | INSULATION, ELECTRICAL, PASTED-MICA |
| L E 530 : A | ENVELOPE, TRANSPARENT |
| GGG-K-266 Revision B:1964 | KEY, COWL FASTENER |
| MIL-S-82529 Base Document:1968 | SWITCH, THERMAL MARK 56 MOD 1 |
| DD-W-131 Revision C:1958 | WATCH GLASS, LABORATORY |
| L-P-410 Revision A:1966 | PLASTIC, POLYAMIDE (NYLON), RIGID: RODS, TUBES, FLATS, MOLDED AND CAST PARTS |
| GG-S-328 Revision B:1958 | SHIELDS, EYE SURGERY |
| GGG-H-33 Revision B:1996 | HAMMER, HAND AND MALLET, SURFACE, PROTECTIVE, HOLDER AND ADAPTER, INSERTED HAMMER FACE, AND FACES, HAMMER, INSERTED |
| SS P 201 : D NOTICE 1 | PENCIL, NONMECHANICAL, COLORED LEAD |
| NNN T 792 : A NOTICE 1 | TUBE DRYING LABORATORY |
| MIL-STD-490 Revision A:1985 | SPECIFICATION PRACTICES |
| GGG-F-00626 Revision A:1994 | FORK, STONE, HAND, D-HANDLE |
| AA-S-00275 Base Document:1964 | SHELVING, STORAGE AND DISPLAY, STEEL, BOLTLESS |
| QQ A 325 : B | ALUMINUM ALLOY BARS, RODS, WIRE, AND SPECIAL SHAPES, ROLLED, DRAWN OR COLD FINISHED 6061. |
| NNN-T-580 Base Document:1963 | TONG LABORATORY |
| MIL-S-27419 Base Document:1968 | STEEL BILLET, CORROSION RESISTANT, ANNEALED, PREMIUM QUALITY |
| L-P-393 Revision A:1964 | PLASTIC MOLDING MATERIAL,POLYCARBONATE, INJECTION AND EXTRUSION |
| L T 0030 : NOTICE 1 | TAB, SIGNAL, PLASTIC, TAB SET, SIGNAL, PLASTIC |
| AA-C-295 Revision A Interim Revision:1963 | CHAIRS, ROTARY, STEEL, TUBULAR SPECIAL PURPOSE |
| GGG-P-453 Revision A:1965 | PLATE, SURFACE, CAST IRON |
| DDD-P-52 Base Document:1959 | PAD, CLOTH, COPPER SULFATE IMPREGNATED |
| MIL T 82535 : (1) NOTICE 1 | TIMER, INTERVAL, MARK 11 MOD 2 (ASSEMBLY) |
| MIL-S-85354 Base Document:1980 | SWITCH INERTIA, FUZE |
| MIL-F-85400 Base Document:1980 | FUSE, GUIDED MISSILE, DUMMY FMU-138(D-1)/B |
| MIL-F-85815 Revision A:1993 | FUSE, BOMB, ELECTRONIC FMU-139A/B |
| GG-H-166 Revision B:1958 | |
| GG-S-00792 Base Document:1963 | STYLUS, DUPLICATING STENCIL |
| GG-C-620 Revision C:1962 | COUNTER, RECIPROCATING, HAND-HELD |
| GG-O-588 Revision B:1964 | OPENER, LETTER, HAND, METAL |
| MIL P 46610 : E | PRIMER, PERCUSSION, STYPHNATE AND CHLORATE TYPES, FOR SMALL ARMS AMMUNITION |
| GG-F-615 Base Document:1961 | FORCEPS, SPLINTER |
| GGG-O-599 Revision B:1963 | OPENER, CRATE |
| GG-G-00650 Revision A:1970 | GRID, RADIOGRAPHIC, STRAIGHT, WAFER TYPE |
| MIL-F-85744 Base Document:1987 | FUSE, PROXIMITY, DISPENSER FMU-140/B |
| NNN D 350 : A NOTICE 1 | DISH GUM TEST |
| DD-B-601 Base Document:1959 | BOTTLE, STOPPER, MILK DILUTION, 160 MILLILITRES |
| NNN-T-698 Base Document:1963 | TRIPOD LABORATORY APPARATUS |
| GG W 00101 : C | WASHERS, BEDPAN AND URINAL |
| MIL-STD-1475 Base Document:1974 | CONTAMINATION CONTROL TECHNOLOGY PACKAGING PROTECTION OF PRECISION CLEANED MATERIAL |
| MIL-S-85565 Base Document:1985 | SERVO COLD GAS |
| AA-V-200 Revision B Interim Revision:1973 | VENETIAN BLINDS |
| PPP-C-850 Revision D:1964 | CUSHIONING MATERIAL, POLYSTYRENE EXPANDED, RESILIENT (FOR PACKAGING USES) |
| KK-W-266 Revision A:1961 | WHEEL, BUFFING, CHAMOIS, 3 INCH |
| UU T 54 : E | TAB, INDEX, GUMMED |
| DD-F-786 Revision C:1960 | FUNNEL, FILTERING, LABORATORY, PORCELAIN, BUCHNER TYPE |
| GGG-B-440 Revision B:1964 | Blade, Circular Saw, Woodcutting |
| JJJ-B-81 Revision E:1976 | BALL, ABSORBENT, COTTON OR RAYON, NON STERILE |
| RR-G-700 Revision B:1963 | GRIP, WIRE, STRAND, WIRE ROPE AND CABLE |
| GGG-J-65 Revision A:1965 | JOINTER, BRICK |
| MIL-C-82493 Base Document:1967 | CABLE ASSEMBLY MARK 10 MOD O |
| W-T-631 Revision C:1961 | TRANSFORMER, POWER DISTRIBUTION |
| GG-F-620 Base Document:1960 | FORCEPS, TOWEL |
| GGG-P-441 Revision A:1965 | PLATES, ANGLE, ADJUSTABLE AND SOLID |
| GGG-S-190 Revision A:1965 | SEAMER, SHEET METAL, HAND |
| GG-S-325 Base Document:1961 | SHIELD, EYE, SURGICAL, FOX |
| GG-R-563 Revision B:1957 | ROLL, ABSORBENT COTTON AND ROLL, CELLULOSE |
| HH-P-41 Revision D:1986 | PACKING, ASBESTOS, ROPE AND WICK |
| NNN-G-690 Base Document:1963 | GRADUATE LIQUID LABORATORY PLASTIC |
| GG-B-426 Revision B:1960 | BLOCK, BITE |
| AA-B-60 Base Document:1959 | BASSINET AND DRESSING TABLE COMBINATION, HOSPITAL, CORROSION-RESISTING STEEL |
| GGG-C-800 Revision B:1964 | CUTTER, WIRE ROPE, HAND OPERATED |
| QQ-C-576 Revision B:1961 | COPPER FLAT PRODUCTS WITH SLIT, SLIT AND EDGE-ROLLED, SHEARED, SAWED OR MACHINED EDGES, (PLATE, BAR, SHEET, AND STRIP) |
| GGG-C-137 Revision A:1964 | CAP, VICE JAW |
| GGG W 00656 : 0 | WRENCH, SOCKET (SET, SPARK PLUG, HAND, INCLUDING HANDLES AND ATTACHMENTS) |
| GGG-H-20 Revision A:1961 | HAMMER, HAND, (BODY AND FENDER, FORGED STEEL HEAD) |
| GG-L-340 Base Document:1960 | LIGHT, COLOR PERFECTION TESTING |
| GG-D-223 Revision B:1958 | DEPRESSOR, TONGUE, METAL |
| MIL-S-82489 Base Document:1967 | SWITCH, DRIVER MARK 76 MOD 0 |
| GGG-W-680 Revision A:1964 | WRENCHES, TAP AND REAMER, ADJUSTABLE |
| FF-C-436 Revision F:1988 | CLIP, PAPER, WIRE |
| GGG-N-350 Revision A:1959 | NIPPERS AND PINCERS |
| GG-B-814 Revision B:1959 | BURNER, ALCOHOL, PRESSURE-TYPE |
| MIL-C-85256 Base Document:1981 | CARTRIDGE, IMPULSE, CCU-13/B |
| GGG-C-771 Revision D:1964 | CUTTERS, PIPE; AND CUTTERS, TUBE |
| NNN-M-560 Base Document:1962 | MORTAR AND PESTLE |
| GG-M-100 Revision A:1958 | MAGNIFIER (BINOCULAR) |
| DD-F-776 Revision C:1960 | FUNNEL, FILTERING, LABORATORY, GLASS, BUCHNER TYPE |
| GGG-T-20 Revision B:1964 | TACKER, STAPLE, (COMPRESSION TYPE, MANUALLY OPERATED), AND STAPLE, TACKER |
| H-B-531 Revision C:1962 | BRUSH, SCRUB, DECK |
| HH-I-00536 Revision A:1963 | INSULATION, ELECTRICAL, MICA, NATURAL MUSCOVITE |
| NNN-B-789 Base Document:1963 | BURET STRAIGHT PRECISION (SUPERSEDES IN PART FED SPEC DD-V-581A) |
| L-C-566 Revision C:1957 | COMB, HAIR (PLASTIC) |
| L-S-281 Revision C:1963 | SHIELD, ERASING, TYPIST |
| GGG-B-471 Revision B:1964 | BLADE, COPING SAW; AND BLADE, JEWELLERS' SAW |
| TT I 00521 : A | INK, COPYING AND RECORD |
| H-B-621 Revision F:1958 | BRUSH, STENCIL |
| FF-N-180 Revision A:1966 | NEEDLE, EXCEPT SURGICAL, HAND |
| MIL-G-85258 Base Document:1981 | GENERATOR, GAS PRESSURE, PROPELLANT ACTUATED BBU-18/B |
| MIL-F-85571 Revision A:1986 | FUZE, BOMB, ELECTRONIC, FMU-139/B |
| GGG-E-926 Revision B:1963 | EXTRACTOR; COTTER-PIN |
| BB-O-925 Revision A:1961 | OXYGEN, TECHNICAL, GAS AND LIQUID |
| JJJ B 0087 : NOTICE 1 | BALL, GAUZE |
| GGG-B-101 Revision D:1963 | BAR, CHISEL, PINCH, PRY, WRECKING, DIGGING, TRAMPING, DIGGING AND TRAMPING, AND CROWBAR |
| GGG-D-647 Revision A:1965 | DRILL BLANKS AND DRILL BLANK SETS |
| ASTM B 163 :2011 | Standard Specification for Seamless Nickel and Nickel Alloy (UNS N06845) Condenser and Heat-Exchanger Tubes |
| ASTM B 168 : 2011 | Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Plate, Sheet, |
| ASTM B 865 : 2004 : R2015 | Standard Specification for Precipitation Hardening Nickel-Copper-Aluminum Alloy<brk/> (UNS N05500) Bar, Rod, Wire, Forgings, and Forging Stock |
| UU-B-335 Revision A:1957 | BINDER, LOOSE LEAF, (WITH OR WITHOUT FLEXIBLE PRONG) |
| LLL-B-650 Revision A:1965 | BOX, FILING, CLOTH COVERED WOOD OR FIBER |
| NN-H-0085 Base Document:1964 | HANDLE, FILE (ADJUSTABLE TYPE) |
| GGG-H-570 Revision A:1965 | HOLDER AND GUIDE, DRIVE PIN |
| DDD-P-53 Revision B:1957 | PAD, ABDOMINAL (DRAINAGE DRESSING COMBINES) |
| GG-F-617 Base Document:1961 | |
| GGG-D-691 Revision B:1962 | DRILL, MASONRY, HAND AND HOLDER, MASONRY DRILL, HAND |
| GG-B-686 Revision B:1957 | BROACH, ROOT CANAL, DENTAL |
| GGG-S-00625 Base Document:1964 | SPOON, BODY AND FENDER |
| L-P-392 Revision A:1964 | PLASTIC MOLDING MATERIAL, ACETAL, INJECTION AND EXTRUSION |
| GG I 492 : A | INDICATOR, SIGHT LIQUID |
| AA-S-81 Revision B:1962 | SAFES, OFFICE, FIRE RESISTANT, BURGLARY PROTECTION |
| GGG-G-00695 Revision A:1965 | GROOVER, SHEET METAL, HAND |
| GGG-S-131 Revision E:1965 | SCRIBER, MACHINISTS |
| GG-C-136 Revision B:1958 | CATHETERS, URETERAL, (X-RAY, GRADUATED) |
| MIL-P-82491 Base Document:1967 | POWER SUPPLY MARK 112 MOD 1 |
| MIL-M-85255 Base Document:1981 | MOTOR, HOT GAS (MAU-132A/B) |
| GGG-R-200 Revision B:0196 | REMOVAL TOOL, OIL FILTER |
| GGG-C-414 Revision A:1965 | CLAMP, WIRE SPLICING |
| GG-S-605 Base Document:1960 | SPECULUM SET, EAR |
| KK-P-91 Revision B:1963 | PALM, SEWING, (SAILMARKERS' AND SADLERS') |
| MIL-B-85685 Base Document:1988 | BOOSTER, FUZE, MARK 60 MOD 3 |
| MIL-C-83360 Revision C:1975 | CLEANING AND LUBRICATING COMPOUND, ELECTRICAL CONTACT |
| GGG-T-00570 Revision A:1965 | TORCH KIT, SOLDERING (PROPANE GAS) |
| MIL-L-85297 Base Document:1980 | LEAD, EXPLOSIVE MARK 24 MOD O MARK 25 MOD O |
| L-P-506 Revision A:1963 | PLASTIC SHEET AND FILM, POLYSTYRENE, BIAXIALLY ORIENTED |
| GGG-H-86 Revision C:1963 | HAMMER, HAND, (FORGED STEEL HEAD) |
| NNN F 800 : A NOTICE 1 | FUNNEL SEPARATORY |
| GGG-B-50 Revision A:1966 | BAG, LINEMAN'S TOOL, ROUND |
| GG-H-590 Base Document:1959 | HOLDER, RADIOGRAPHIC FILM CASSETTE |
| GGG-D-780 Revision A:1965 | DRIVER, PROJECTILE, UNIT, POWDER ACTUATED (TRIGGER-FIRED, LOW VELOCITY, PISTON TYPE) |
| TT-A-516 Revision D:1962 | AMYL ALCOHOL, SECONDARY |
| W-S-865 Revision C:1959 | SWITCH BOX, (ENCLOSED), SURFACE-MOUNTED |
| GGG-S-775 Revision A:1960 | STUD REMOVER AND SETTER |
| NNN-B-001194 Base Document:1966 | BOTTLE DROPPER AND DROPPING TK |
| O-N-335 Base Document:1962 | NICKEL SALT, ELECTROPLATING |
| GGG H 580 : A | HOOK, MATERIAL HANDLING, HAND |
| ZZ-G-100 Revision A:1961 | GLOVES, RUBBER, AUTOPSY |
| GGG-H-00110 Base Document:0196 | HANDLING TOOL, SHEET MATERIAL (VACUUM TYPE) |
| CCC C 531 : E | CLOTH, TRACING |
| UU B 342 : A | BINDER, LOOSE LEAF, RING, ENGINEER S FIELD BOOK |
| LLL-F-00550 Base Document:1964 | FORK AND SPOON, PICNIC (WOOD) |
| GG H 925 : 0 | HYDROMETERS, GRADUATED SCALE (FOR GENERAL LABORATORY USE) |
| GGG-O-591 Revision F:1977 | OILER, HAND |
| HH-I-538 Revision B:1964 | INSULATION, ELECTRICAL, PASTED-MICA |
| NNN C 440 : NOTICE 1 | CLAMP UTILITY LABORATORY AND HOLDER BURET CLAMP |
| DD S 750 : A | STOPPER, LABORATORY APPARATUS, TAPER-GROUND |
| GG-T-750 Base Document:1958 | TUBE, DUODENAL, SURGICAL, (REHFUSS) |
| AA-P-560 Revision A:1966 | POINTER, LECTURE |
| GGG-T-0040 Revision A Interim Revision:1965 | TAMPERS, HAND |
| GGG-W-653 Revision B:1964 | WRENCH, RATCHET, REVERSIBLE |
| QQ-B-750 Base Document:1961 | BRONZE, PHOSPHOR, BAR, PLATE, ROD, SHEET, STRIP, FLAT WIRE, AND STRUCTURAL AND SPECIAL SHAPED SECTIONS |
| O-I-501 Revision B:1964 | INHIBITORS, PICKLING (FOR USE WITH SULPHURIC ACID) |
| O-S-00650 Base Document:1965 | SODIUM SULFITE, ANHYDROUS, TECHNICAL, AND SODIUM BISULFITE, ANHYDROUS, TECHNICAL, FOR WATER TREATMENT |
| GG-T-675 Base Document:1958 | TRIMMER, ANIMAL TOENAIL |
| GGG-A-145 Revision A:1965 | ADJUSTING TOOL, BRAKE SHOE (SPOON TYPE) |
| MIL-S-82487 Base Document:1967 | SWITCH, SQUIB MARK 65 MOD 0 |
| GGG-F-671 Revision B:1957 | FRAME, HAND HACKSAW; FRAME, JEWELER'S SAW; AND FRAME, COPING SAW |
| GG-G-590 Base Document:1961 | GONIOMETER, ORTHOPEDIC |
| GGG-D-698 Revision A:1963 | DRILL, RATCHET (REVERSIBLE) |
| MIL-V-85402 Base Document:1980 | VALVE, AIR, DUAL, PYROTECHNIC ACTUATED FZU-43/B |
| VV-S-190 Base Document:1961 | SEALING COMPOUND (DIPCOAT) |
| GGG-D-694 Revision A:1960 | DRILL, MASONRY, ROTARY DRIVEN |
| JJJ-B-87 Base Document:1959 | BALL, GAUZE |
| DD-T-710 Base Document:1957 | TUBE, CONNECTING, LABORATORY GLASSWARE AND CONNECTOR, ELASTIC TUBING, BRANCHED |
| GGG-P-00788 Base Document:1964 | PULLER, MECHANICAL, WATCH AND CLOCK HAND |
| GGG A 00147 : 0 | ADJUSTING TOOL, VALVE TAPPET |
| GG-R-60 Revision C:1965 | RAZORS, SAFETY; AND BLADES, RAZOR |
| GG-S-176 Revision A:1960 | SCREEN, X-RAY INTENSIFYING, ROENTGENOGRAPHIC, FOR DIAGNOSTIC RADIOGRAPHY |
| DDD-E-940 Base Document:1963 | EYELET REINFORCEMENT, GUMMED, CLOTH |
| GGG-R-0080 Base Document:1965 | RAKE (ASPHALT, ROAD) |
| TT B 848 : B | BUTYL ALCOHOL, SECONDARY (FOR USE IN ORGANIC COATINGS) |
| TT-I-526 Revision A:1964 | INK, DRAWING, BLACK AND COLORS (FOR GLAZED PLASTIC SURFACES) |
| QQ-C-40 Base Document:1963 | CALKING, LEAD WOOL AND LEAD PIG |
| MIL-D-85580 Revision B:1988 | DEVICE, SAFETY AND ARMING, FUZE, DUMMY, FSU-10(D-1)/A AND DEVICE, SAFETY AND ARMING, FUZE, TRAINING, FSU-10(T-1)/A |
| GGG-S-285 Revision B:1964 | SHEARS, PRUNING, HAND, (TWO-HAND OPERATED, LOPPING) |
| GGG-S-284 Revision B:1964 | SHEARS; PRUNING, HAND, (ONE-HAND OPERATED) |
| GGG-F-00420 Base Document:1963 | FISHING TOOL, PNEUMATIC TYPE VALVE |
| QQ C 586 : C | COPPER NICKEL ZINC ALLOY, ROD, SHAPES, FLAT PRODUCTS WITH FINISHED EDGES (FLAT WIRE, STRIP, AND BAR) |
| GG-H-582 Base Document:1959 | HOLDER, PATIENT'S BED-TRAY CARD |
| QQ-M-40 Revision B:1962 | MAGNESIUM ALLOY FORGINGS |
| TT S 227 : B NOTICE 1 | SEALING COMPOUND, RUBBER BASE, TWO COMPONENT (FOR CALKING, SEALING, & GLAZING IN BUILDING CONSTRUCTION) |
| GG L 110 : NOTICE 1 | LANCET, FINGER BLEEDING |
| L-C-780 Revision A:1965 | CURTAIN, SHOWER AND WINDOW, PLASTIC |
| ASTM B 250/B250M : 2016 : REDLINE | Standard Specification for General Requirements for Wrought Copper Alloy Wire |
| MIL-D-85465 Revision B:1988 | DEVICE, SAFETY AND ARMING, FUZE FSU-10/A |
| GG-L-00410 Base Document:1964 | LINE GUIDE, LETTERING, ADJUSTABLE |
| H-B-401 Revision C:1964 | BRUSHES, MUCILAGE AND PASTE |
| L-P-511 Base Document:1964 | PLASTIC SHEET, LAMINATED, THERMOSETTING, COTTON FABRIC BASE, PHENOLIC-RESIN, POST-FORMING |
| DD-B-599 Revision A:1961 | BOTTLE, STOPPER, VACCINE, ROUND AND STOPPER, BOTTLE, RUBBER |
| GG-G-650 Base Document:1959 | GRID, RADIOGRAPHIC, STRAIGHT, WAFER TYPE |
| K-B-1069 Revision A:1972 | BASKET, FRAME MOUNTED |
| DDD-B-60 Base Document:1959 | BANDAGE, GAUZE, TUBULAR |
| KKK-L-370 Revision D:1988 | LINING, FRICTION, (CLUTCH AND BRAKE, METALLIC, METAL-CERAMIC AND SEMI-METALLIC) |
| UU P 675 : B INT AMD (7) | POCKET PLANNING SET |
| O-S-377 Revision B:1966 | SODIUM PYROPHOSPHATE, ANHYDROUS, TECHNICAL (TETRASODIUM-PYROPHOSPHATE) (S/S BY DOD-S-51517) |
| NNN-B-788 Revision A:0196 | BULB DROPPING PIPETTE |
| GGG-S-665 Revision C:1963 | STRIPPER, CABLE, HAND, AND STRIPPER, WIRE, HAND |
| DDD-P-50 Base Document:1959 | PAD, COTTON, DRESSING, EYE PAD |
| GGG-D-651 Revision D:1964 | DRILL, BREAST |
| GGG-H-506 Revision D:1962 | HOE, MATTOCKS, AND PICK |
| L-F-320 Revision B:1965 | FILM, THERMAL DEVELOPING |
| MIL-A-82516 Base Document:1967 | |
| GG-S-125 Base Document:1961 | SAW, PLASTER-CAST, ENGEL |
| UU-B-370 Revision A:1958 | BINDER, LOOSE-LEAF, POST-TYPE, (STORAGE-TYPE) |
| UU-P-680 Revision A:1964 | PORTFOLIO, DOUBLE-POCKET, PRESENTATION |
| RR-P-586 Revision A:1958 | POT, MELTING, (NONELECTRIC, SOLDER STYLE) |
| GG G 66 : B | GAGE, PRESSURE, DIAL INDICATING |
| L-P-389 Revision A:1964 | PLASTIC MOLDING MATERIAL, FEP FLUOROCARBON, MOLDING AND EXTRUSION |
| TT B 838 : A | BUTYL ACETATE, NORMAL (FOR USE IN ORGANIC COATINGS) |
| DDD-S-251 Revision D:1966 | SHADE, ROLLER, WINDOW, ROLLER, SLAT, CORD, AND ACCESSORIES |
| GGG-G-31 Revision A:1961 | GAGES, MARKING AND MORTISING |
| ASTM B 163 : 2011 : EDT 1 | Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes |
| ASTM B 168 : 2011(R2016) | Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Plate, Sheet, and Strip |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.