EN ISO 9377-2:2000
Current
The latest, up-to-date edition.
Water quality - Determination of hydrocarbon oil index - Part 2: Method using solvent extraction and gas chromatography (ISO 9377-2:2000)
15-10-2000
Foreword
1 Scope
2 Normative references
3 Term and definition
4 Interferences
5 Principle
6 Reagents
7 Apparatus
8 Sampling and sample preservation
9 Procedure
10 Test report
11 Precision
Annex A (informative) Example of a column and a
microseparator
Annex B (informative) Examples of gas chromatograms of
mineral oil standard and water samples
Annex C (informative) Determination of boiling range of a
mineral oil from the gas chromatogram
Bibliography
Defines a procedure for the determination of the hydrocarbon oil index in waters by means of gas chromatography. This method is applicable for surface water, waste water and water from sewage treatment plants and permits the determination of a hydrocarbon oil index in concentrations above 0.1 mg/l. This method does not apply to the quantitative determination of the content of volatile mineral oil. However, on the basis of the peak pattern of the gas chromatogram, certain qualitative information on the composition of the mineral oil contamination can be derived.
| Committee |
CEN/TC 230
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| BS 6068-2.72(2000) : 2000 | Identical |
| NS EN ISO 9377-2 : 1ED 2000 | Identical |
| SN EN ISO 9377-2 : 2001 | Identical |
| I.S. EN ISO 9377-2:2000 | Identical |
| SS-EN ISO 9377-2 : 2001 | Identical |
| ISO 9377-2:2000 | Identical |
| BS EN ISO 9377-2:2000 | Identical |
| PN EN ISO 9377-2 : 2003 | Identical |
| UNE-EN ISO 9377-2:2001 | Identical |
| NBN EN ISO 9377-2 : 2001 | Identical |
| NEN EN ISO 9377-2 : 2000 | Identical |
| DIN EN ISO 9377-2:2001-07 | Identical |
| UNI EN ISO 9377-2 : 2002 | Identical |
| NF EN ISO 9377-2 : 2000 | Identical |
| BS EN 14039:2004 | Characterization of waste. Determination of hydrocarbon content in the range of C10 to C40 by gas chromatography. |
| CEN/TS 16811-3:2015 | Winter service equipment and products - De-icing agents - Part 3: Other solid and liquid de-icing agents - Requirements and test methods |
| PD CEN/TS 16811-3:2015 | Winter maintenance equipment. De-icing agents Other solid and liquid de-icing agents. Requirements and test methods |
| BS EN 16811-1:2016 | Winter service equipment and products. De-icing agents Sodium chloride. Requirements and test methods |
| VDI 3455:2013-08 | Emission control - High-volume car body painting plants |
| EN 16811-1:2016 | Winter service equipment and products - De-icing agents - Part 1: Sodium chloride - Requirements and test methods |
| EN 16811-2:2016 | Winter service equipment and products - De-icing agents - Part 2: Calcium chloride and Magnesium chloride - Requirements and test methods |
| EN 14039:2004 | Characterization of waste - Determination of hydrocarbon content in the range of C10 to C40 by gas chromatography |
| BS EN 16811-2:2016 | Winter service equipment and products. De-icing agents Calcium chloride and Magnesium chloride. Requirements and test methods |
| S.R. CEN/TS 16811-3:2015 | WINTER MAINTENANCE EQUIPMENT - DE-ICING AGENTS - PART 3: OTHER SOLID AND LIQUID DE-ICING AGENTS - REQUIREMENTS AND TEST METHODS |
| BS EN 1825-1:2004 | Grease separators Principles of design, performance and testing, marking and quality control |
| BS EN 858-1:2002 | Separator systems for light liquids (e.g. oil and petrol) Principles of product design, performance and testing, marking and quality control |
| DIN CEN/TS 16811-3;DIN SPEC 30757:2016-08 | WINTER SERVICE EQUIPMENT AND PRODUCTS - DE-ICING AGENTS - PART 3: OTHER SOLID AND LIQUID DE-ICING AGENTS - REQUIREMENTS AND TEST METHODS |
| DIN EN 14039:2005-01 | Characterization of waste - Determination of hydrocarbon content in the range of C10 to C40 by gas chromatography; |
| DIN EN 1825-1:2004-12 | Grease separators - Part 1: Principles of design, performance and testing, marking and quality control; German version EN 1825-1:2004 |
| ISO 5667-3:2012 | Water quality Sampling Part 3: Preservation and handling of water samples |
| ISO 8466-1:1990 | Water quality Calibration and evaluation of analytical methods and estimation of performance characteristics Part 1: Statistical evaluation of the linear calibration function |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.