EN ISO 9000:2015
Current
Current
The latest, up-to-date edition.
Quality management systems - Fundamentals and vocabulary (ISO 9000:2015)
Published date
15-09-2015
Publisher
Sorry this product is not available in your region.
Foreword
Introduction
1 Scope
2 Fundamental concepts and quality management
principles
3 Terms and definitions
Annex A (informative) - Concept relationships and
their graphical representation
Bibliography
Alphabetical index of terms
ISO 9000:2015 describes the fundamental concepts and principles of quality management which are universally applicable to the following:organizations seeking sustained success through the implementation of a quality management system;customers seeking confidence in an organization's ability to consistently provide products and services conforming to their requirements;organizations seeking confidence in their supply chain that their product and service requirements will be met;organizations and interested parties seeking to improve communication through a common understanding of the vocabulary used in quality management;organizations performing conformity assessments against the requirements of ISO 9001;providers of training, assessment or advice in quality management;developers of related standards.ISO 9000:2015 specifies the terms and definitions that apply to all quality management and quality management system standards developed by ISO/TC 176.
| Committee |
CEN/BT
|
| DevelopmentNote |
Supersedes EN ISO 8402. (07/2005) Supersedes EN ISO 9000-1. (08/2012)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| SN EN ISO 9000 : 2015 | Identical |
| NBN EN ISO 9000 : 2015 | Identical |
| BS EN ISO 9000:2015 | Identical |
| ISO 9000:2015 | Identical |
| NF EN ISO 9000:2015 | Identical |
| UNI EN ISO 9000 :2015 | Identical |
| DIN EN ISO 9000:2015-11 | Identical |
| SS-EN ISO 9000:2015 | Identical |
| UNI EN ISO 9000 : 2005 | Identical |
| NEN EN ISO 9000 : 2015 | Identical |
| UNE-EN ISO 9000:2015 | Identical |
| NS EN ISO 9000 : 2000 | Identical |
| I.S. EN ISO 9000:2015 | Identical |
| PN EN ISO 9000 : 2015 | Identical |
| SN EN ISO 9000:2015 + FPREN ISO 9000:2015 DUO-PAKET:2015 | Identical |
| SN EN ISO 9000:2015 + ISO/FDIS 9000:2015 PAQUET DUO:2015 | Identical |
| ISO/DIS 9000:2014 | Identical |
| DIN EN 1325:2014-07 | Value Management - Vocabulary - Terms and definitions |
| PREN 15497 : DRAFT 2011 | STRUCTURAL FINGER JOINTED SOLID TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS |
| 02/700015 DC : DRAFT JAN 2002 | BS EN 14350-2 - CHILD CARE ARTICLES - DRINKING EQUIPMENT - CHEMICAL REQUIREMENTS AND TEST METHODS |
| PD CEN/TR 14585-2:2006 | Corrugated metal hose assemblies for pressure applications Guidance on the use of conformity assessment procedures |
| BS EN 15224:2016 | Quality management systems. EN ISO 9001:2015 for healthcare |
| DIN EN 13282-3:2015-06 | Hydraulic road binders - Part 3: Conformity evaluation |
| 08/30182184 DC : DRAFT AUG 2008 | BS EN 13263-2 AMD1 - SILICA FUME FOR CONCRETE - PART 2: CONFORMITY EVALUATION |
| UNE-EN 16431:2015 | Railway applications - Track - Hollow sleepers and bearers |
| 09/30183366 DC : 0 | BS EN 13611:2007/A1 - SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - GENERAL REQUIREMENTS |
| 11/30247279 DC : 0 | BS EN 1337-1 - STRUCTURAL BEARINGS - PART 1: GENERAL |
| 09/30202006 DC : 0 | BS EN 15359 - SOLID RECOVERED FUELS - SPECIFICATIONS AND CLASSES |
| 08/30184309 DC : DRAFT SEP 2008 | BS EN 12952-5 - WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 5: WORKMANSHIP AND CONSTRUCTION OF PRESSURE PARTS OF THE BOILER |
| I.S. EN 12966-2:2005 | ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS - PART 2: INITIAL TYPE TESTING |
| DIN EN 16265:2016-05 | PYROTECHNIC ARTICLES - OTHER PYROTECHNIC ARTICLES - IGNITION DEVICES |
| UNI CEI CEN/TR 16469 : 2014 | HYDROMETRY - MEASUREMENT OF THE RAINFALL INTENSITY (LIQUID PRECIPITATION): REQUIREMENTS, CALIBRATION METHODS AND FIELD MEASUREMENTS |
| I.S. EN 12967-3:2007 | HEALTH INFORMATICS - SERVICE ARCHITECTURE - PART 3: COMPUTATIONAL VIEWPOINT |
| BS EN 16265:2015 | Pyrotechnic articles. Other pyrotechnic articles. Ignition devices |
| BS EN 16431:2014 | Railway applications. Track. Hollow sleepers and bearers |
| BS EN 50207:2001 | Railway applications. Electronic power converters for rolling stock |
| BS EN 15357:2011 | Solid recovered fuels. Terminology, definitions and descriptions |
| I.S. EN 15424:2007 | STERILIZATION OF MEDICAL DEVICES - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| DIN EN 15619 E : 2014 | RUBBER OR PLASTIC COATED FABRICS - SAFETY OF TEMPORARY STRUCTURES (TENTS) - SPECIFICATION FOR COATED FABRICS INTENDED FOR TENTS AND RELATED STRUCTURES |
| I.S. EN 287-1:2011 | QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 1: STEELS |
| BS EN 61249-2-26:2005 | Materials for printed boards and other interconnecting structures Reinforced base materials, clad and unclad. Non-halogenated epoxide non-woven/woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
| UNI EN 1474-1 : 2009 | INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS |
| BS EN 61249-2-23:2005 | Materials for printed boards and other interconnecting structures Reinforced base materials, clad and unclad - Non-halogenated phenolic cellulose paper reinforced laminated sheets, economic grade, copper-clad |
| CEN/TR 15628:2007 | Maintenance - Qualification of Maintenance personnel |
| UNI EN 1090-3 : 2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| BS CECC 265001:1998 | Harmonized system of quality assessment for electronic components. Technology approval schedule. Film and hybrid integrated circuits |
| I.S. EN 15221-5:2011 | FACILITY MANAGEMENT - PART 5: GUIDANCE ON FACILITY MANAGEMENT |
| BS EN 16751:2016 | Bio-based products. Sustainability criteria |
| 12/30256100 DC : 0 | BS EN 12878 - PIGMENTS FOR THE COLOURING OF BUILDING MATERIALS BASED ON CEMENT AND/OR LIME - SPECIFICATIONS AND METHODS OF TEST |
| BS EN 60966-1:1999 | Radio frequency and coaxial cable assemblies Generic specification. General requirements and test methods |
| 12/30235100 DC : DRAFT JAN 2012 | BS EN 14428 AMD 1 - SHOWER ENCLOSURES - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| DIN EN 12764:2015-09 | SANITARY APPLIANCES - SPECIFICATION FOR WHIRLPOOL BATHS |
| BS EN 62282-3-200:2016 | Fuel cell technologies Stationary fuel cell power systems. Performance test methods |
| DIN EN 15593:2008-05 | Packaging - Management of hygiene in the production of packaging for foodstuffs - Requirements |
| 11/30239903 DC : DRAFT MAR 2011 | BS EN 15013 - PLASTICS PIPING SYSTEMS - NON-PRESSURE DRAINAGE AND SEWERAGE PIPING COMPONENTS BURIED IN GROUND - REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR PIPES AND FITTINGS |
| UNI EN 15593 : 2008 | PACKAGING - MANAGEMENT OF HYGIENE IN THE PRODUCTION OF PACKAGING FOR FOODSTUFFS - REQUIREMENTS |
| BS EN 15001-2:2008 | Gas infrastructure. Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations Detailed functional requirements for commissioning, operation and maintenance |
| 11/30239906 DC : 0 | BS EN 15014 - PLASTICS PIPING SYSTEMS - BURIED AND ABOVE GROUND PIPING COMPONENTS FOR WATER AND OTHER LIQUIDS UNDER PRESSURE - REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR PIPES AND FITTINGS |
| 10/30229864 DC : 0 | BS EN ISO 11240 - HEALTH INFORMATICS - IDENTIFICATION OF MEDICINAL PRODUCTS - DATA ELEMENTS AND STRUCTURES FOR UNIQUE IDENTIFICATION AND EXCHANGE OF UNITS OF MEASUREMENT |
| BS EN 61230:2008 | Live working. Portable equipment for earthing or earthing and short-circuiting |
| BS EN 60300-3-16:2008 | Dependability management Application guide. Guidelines for specification of maintenance support services |
| BS EN 61249-2-18:2002 | Materials for interconnection structures. Sectional specification set for reinforced base materials, clad and unclad Polyester non-woven fibreglass reinforced laminated sheet of defined flammability (vertical burning test), copper clad |
| 10/30238725 DC : 0 | BS EN 60469 - TRANSITIONS, PULSES AND RELATED WAVEFORMS - TERMS, DEFINITIONS AND ALGORITHMS |
| 09/30198066 DC : 0 | BS EN 15927 - SERVICES OFFERED BY HEARING AID PROFESSIONALS |
| PREN 17161 : DRAFT 2017 | DESIGN FOR ALL - ACCESSIBILITY FOLLOWING A DESIGN FOR ALL APPROACH IN PRODUCTS, GOODS AND SERVICES - EXTENDING THE RANGE OF USERS |
| 15/30270279 DC : 0 | BS EN 16432-2 - RAILWAY APPLICATIONS - BALLASTLESS TRACK SYSTEMS - PART 2: SUBSYSTEMS AND COMPONENTS |
| CEI EN 61249-2-18 : 2002 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-18: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - POLYESTER NON-WOVEN FIBREGLASS REINFORCED LAMINATED SHEET OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
| BS EN 16323:2014 | Glossary of wastewater engineering terms |
| BS EN 50090-2-3:2005 | Home and building electronic systems (HBES) System overview. General functional safety requirements for products intended to be integrated in HBES |
| 02/711556 DC : 0 | LINKS FOR USE WITH STEEL CHAINS OF GRADE 8 |
| DIN EN 16311:2013-05 | ENGINEERING SERVICES - TERMINOLOGY TO DESCRIBE ENGINEERING SERVICES FOR INDUSTRIAL PRODUCTS |
| NF EN 50128 : 2011 | RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - SOFTWARE FOR RAILWAY CONTROL AND PROTECTION SYSTEMS |
| BS EN 61987-10:2009 | Industrial-process measurement and control. Data structures and elements in process equipment catalogues Lists of properties (LOPs) for industrial-process measurement and control for electronic data exchange. Fundamentals |
| I.S. CEN TS 14773:2004 | POSTAL SERVICES - QUALITY OF SERVICE - MEASUREMENT OF LOSS AND SUBSTANTIAL DELAY IN PRIORITY AND FIRST CLASS SINGLE PIECE MAIL USING A SURVEY OF TEST LETTERS |
| 11/30247591 DC : DRAFT JULY 2011 | BS EN 16311 - ENGINEERING CONSULTANCY SERVICES - TERMINOLOGY AT A HIGH LEVEL TO DESCRIBE THE ENGINEERING SERVICES FOR INDUSTRIAL PRODUCTS |
| DD CEN/TS 13476-4:2008 | Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Guidance for the assessment of conformity |
| 15/30320419 DC : 0 | BS EN 14527 - SHOWER TRAYS FOR DOMESTIC PURPOSES |
| PD CEN/TR 13695-2:2004 | Packaging. Requirements for measuring and verifying the four heavy metals and other dangerous substances present in packaging, and their release into the environment Requirements for measuring and verifying dangerous substances present in packaging, and their release into the environment |
| BS EN 16271:2012 | Value management. Functional expression of the need and functional performance specification. Requirements for expressing and validating the need to be satisfied within the process of purchasing or obtaining a product |
| BS EN 61478:2001 | Live working. Ladders of insulating material |
| 02/105845 DC : DRAFT SEP 2002 | PREN 14527 - SHOWER TRAYS FOR DOMESTIC PURPOSES |
| BS EN 61249-2-4:2002 | Materials for interconnection structures. Sectional specification set for reinforced base materials, clad and unclad Polyester non-woven/woven fibreglass laminated sheet of defined flammability (vertical burning test), copper-clad |
| CEI EN 61249-2-2 : 2005 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-2: REINFORCED BASE MATERIALS, CLAD AND UNCLAD PHENOLIC CELLULOSE PAPER REINFORCED LAMINATE SHEETS, HIGH ELECTRICAL GRADE, COPPER-CLAD |
| 08/30176350 DC : DRAFT MAR 2008 | BS ISO 12967-2 - HEALTH INFORMATICS - SERVICE ARCHITECTURE - PART 2: INFORMATION VIEWPOINT |
| 13/30279690 DC : 0 | BS EN 16250-1 - LEVELS OF PERFORMANCE AND ACCEPTANCE FOR STREET CLEANING AND MUNICIPAL WASTE MANAGEMENT SERVICES - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 60895:2003 | LIVE WORKING - CONDUCTIVE CLOTHING FOR USE AT NOMINAL VOLTAGE UP TO 800 KV A.C. AND +/- 600 KV D.C. |
| 04/30124490 DC : DRAFT OCT 2004 | EN 15049 - RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - TORSION BAR, STEEL |
| BS EN 62430:2009 | Environmentally conscious design for electrical and electronic products |
| 10/30212556 DC : 0 | BS EN 13282-3 - HYDRAULIC ROAD BINDERS - PART 3: CONFORMITY EVALUATION |
| 09/30202368 DC : 0 | BS 5760-18 - RELIABILITY OF SYSTEMS, EQUIPMENT AND COMPONENTS - PART 18: GUIDE TO THE DEMONSTRATION OF DEPENDABILITY REQUIREMENTS - THE DEPENDABILITY CASE |
| S.R. CEN/TS 12200-2:2017 | PLASTICS RAINWATER PIPING SYSTEMS FOR ABOVE GROUND EXTERNAL USE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| BS EN 15069:2008 | Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel |
| ISO 13485:2016 | Medical devices Quality management systems Requirements for regulatory purposes |
| BS EN 60872-2:1999 | Maritime navigation and radiocommunication equipment and systems. Radar plotting aids Automatic tracking aids (ATA). Methods of testing and required test results |
| CEI EN 61249-2-5 : 2005 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES PART 2-5: REINFORCED BASE MATERIALS, CLAD AND UNCLAD BROMINATED EPOXIDE CELLULOSE PAPER REINFORCED CORE / WOVEN E-GLASS REINFORCED SURFACES LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
| BS EN 61249-2-2:2005 | Materials for printed boards and other interconnecting structures Reinforced base materials, clad and unclad - Phenolic cellulose paper reinforced laminated sheets, high electrical grade, copper-clad |
| UNE-EN 15221-3:2012 | Facility Management - Part 3: Guidance on quality in Facility Management |
| 15/30322448 DC : 0 | BS EN 9223-101 - PROGRAMME MANAGEMENT - CONFIGURATION MANAGEMENT - PART 101: CONFIGURATION IDENTIFICATION |
| PREN 9101 : 200P7 | QUALITY MANAGEMENT SYSTEMS - AUDIT REQUIREMENTS FOR AVIATION, SPACE, AND DEFENSE ORGANIZATIONS |
| BS EN 61249-2-8:2003 | Materials for interconnection structures. Sectional specification set for reinforced base materials, clad and unclad Reinforced base materials clad and unclad. Modified brominated epoxide woven fibreglass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
| UNE-CEN/TS 1555-7:2015 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 7: Guidance for the assessment of conformity |
| UNI CEN/TS 15511 : 2008 | POSTAL SERVICES - QUALITY OF SERVICE - INFORMATION AVAILABLE ON POSTAL SERVICES |
| S.R. CEN/TS 13598-3:2012 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE)(PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 3: GUIDANCE FOR ASSESSMENT OF CONFORMITY |
| I.S. EN 16844:2017+A2:2019 | Aesthetic medicine services - Non-surgical medical treatments |
| CEI EN 61744 : 2006 | CALIBRATION OF FIBRE OPTIC CHROMATIC DISPERSION TEST SETS |
| 07/30166909 DC : DRAFT AUG 2007 | BS EN 15714-2 - INDUSTRIAL VALVES - ACTUATORS - PART 2: ELECTRIC ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| DIN EN 16432-2:2015-04 (Draft) | RAILWAY APPLICATIONS - BALLASTLESS TRACK SYSTEMS - PART 2: SYSTEM DESIGN, SUBSYSTEMS AND COMPONENTS |
| PREN 9223-102 : DRAFT 2016 | PROGRAMME MANAGEMENT - CONFIGURATION MANAGEMENT - PART 102: CONFIGURATION STATUS ACCOUNTING |
| PREN 9277 : DRAFT 2014 | AEROSPACE SERIES - PROGRAMME MANAGEMENT - GUIDE FOR THE MANAGEMENT OF SYSTEM ENGINEERING |
| PREN 9223-100 : DRAFT 2016 | PROGRAMME MANAGEMENT - CONFIGURATION MANAGEMENT - PART 100: A GUIDE FOR THE APPLICATION OF THE PRINCIPLES OF CONFIGURATION MANAGEMENT |
| PREN 9136 : 2016 | AEROSPACE SERIES - ROOT CAUSE ANALYSIS AND PROBLEM SOLVING (9S METHODOLOGY) |
| PREN 9145 : DRAFT 2016 | AEROSPACE SERIES - REQUIREMENTS FOR ADVANCED PRODUCT QUALITY PLANNING AND PRODUCTION PART APPROVAL PROCESS |
| PREN 9278 : DRAFT 2017 | AEROSPACE SERIES - GENERAL PRINCIPLES OF OBSOLESCENCE MANAGEMENT OF CHEMICALS, MATERIALS AND PROCESSES |
| I.S. EN 15221-4:2011 | FACILITY MANAGEMENT - PART 4: TAXONOMY, CLASSIFICATION AND STRUCTURES IN FACILITY MANAGEMENT |
| I.S. EN 16432-2:2017 | RAILWAY APPLICATIONS - BALLASTLESS TRACK SYSTEMS - PART 2: SYSTEM DESIGN, SUBSYSTEMS AND COMPONENTS |
| I.S. EN 9223-100:2018 | PROGRAMME MANAGEMENT - CONFIGURATION MANAGEMENT - PART 100: A GUIDE FOR THE APPLICATION OF THE PRINCIPLES OF CONFIGURATION MANAGEMENT |
| I.S. EN 61478:2002 | LIVE WORKING - LADDERS OF INSULATING MATERIAL |
| CEI EN 61249-4-11 : 2006 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES PART 4-11: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD NON-HALOGENATED EPOXIDE, WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY |
| I.S. EN 16848:2016 | BIO-BASED PRODUCTS - REQUIREMENTS FOR BUSINESS TO BUSINESS COMMUNICATION OF CHARACTERISTICS USING A DATA SHEET |
| I.S. EN 9223-102:2018 | PROGRAMME MANAGEMENT - CONFIGURATION MANAGEMENT - PART 102: CONFIGURATION STATUS ACCOUNTING |
| I.S. EN 15358:2011 | SOLID RECOVERED FUELS - QUALITY MANAGEMENT SYSTEMS - PARTICULAR REQUIREMENTS FOR THEIR APPLICATION TO THE PRODUCTION OF SOLID RECOVERED FUELS |
| I.S. EN 13282-3:2015 | HYDRAULIC ROAD BINDERS - PART 3: CONFORMITY EVALUATION |
| BS EN 15619:2014 | Rubber or plastic coated fabrics. Safety of temporary structures (tents). Specification for coated fabrics intended for tents and related structures |
| I.S. EN 61249-2-22:2005 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-22: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - MODIFIED NON-HALOGENATED EPOXIDE WOVEN E-GLASS LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
| S.R. CEN/TS 16800:2015 | GUIDELINE FOR THE VALIDATION OF PHYSICO-CHEMICAL ANALYTICAL METHODS |
| I.S. EN 17007:2017 | MAINTENANCE PROCESS AND ASSOCIATED INDICATORS |
| I.S. EN 1474-1:2008 | INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS |
| I.S. CLC/TS 61112:2006 | BLANKETS OF INSULATING MATERIAL FOR ELECTRICAL PURPOSES |
| I.S. CR 14269:2001 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - GUIDELINES FOR THE PURCHASE |
| I.S. EN 60966-3:2003 | RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 3: SECTIONAL SPECIFICATION FOR SEMI-FLEXIBLE COAXIAL CABLE ASSEMBLIES |
| I.S. EN 61249-4-18:2013 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-18: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD (FOR THE MANUFACTURE OF MULTILAYER BOARDS) - HIGH PERFORMANCE EPOXIDE WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST) FOR LEAD-FREE ASSEMBLY |
| I.S. EN 61249-2-2:2005 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-2: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - PHENOLIC CELLULOSE PAPER REINFORCED LAMINATE SHEETS, HIGH ELECTRICAL GRADE, COPPER-CLAD |
| I.S. EN 15359:2011 | SOLID RECOVERED FUELS - SPECIFICATIONS AND CLASSES |
| CEI EN 61249-4-12 : 2006 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES PART 4-12: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD NON-HALOGENATED MULTIFUNCTIONAL EPOXIDE WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY |
| CEI EN 61249-2-11 : 2005 | MATERIAUX POUR CIRCUITS IMPRIMES ET AUTRES STRUCTURES D'INTERCONNEXION - PARTIE 2-11: MATERIAUX DE BASE RENFORCES, PLAQUES ET NON PLAQUES - FEUILLES STRATIFIEES RENFORCEES EN POLYIMIDE ET TISSU DE VERRE DE TYPE E EPOXYDE BROME MODIFIE OU NON MODIFIE, D'INFLAMMABILITE DEFINIE (ESSAI DE COMBUSTION VERTICALE), PLAQUEES CUIVRE |
| CEI EN 50365 : 2004 | ELECTRICALLY INSULATING HELMETS FOR USE ON LOW VOLTAGE INSTALLATIONS |
| DD CEN ISO/TS 15876-7:2003 | Plastics piping systems for hot and cold water installations. Polybutylene (PB) Guidance for the assessment of conformity |
| DIN EN 14428:2015-09 | SHOWER ENCLOSURES - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| I.S. EN 16751:2016 | BIO-BASED PRODUCTS - SUSTAINABILITY CRITERIA |
| DD CEN/TS 14632:2006 | Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure. Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP). Guidance for the assessment of conformity |
| I.S. CEN/TR 14585-2:2006 | CORRUGATED METAL HOSE ASSEMBLIES FOR PRESSURE APPLICATIONS - PART 2: GUIDANCE ON THE USE OF CONFORMITY ASSESSMENT PROCEDURES |
| 17/30366897 DC : 0 | BS EN 17161 - DESIGN FOR ALL - ACCESSIBILITY FOLLOWING A DESIGN FOR ALL APPROACH IN PRODUCTS, GOODS AND SERVICES - EXTENDING THE RANGE OF USERS |
| UNI EN 15234-1 : 2011 | SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 1: GENERAL REQUIREMENTS |
| DIN EN 1090-3:2008-09 | EXECUTION OF STEEL AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL RULES FOR EXECUTION OF ALUMINIUM STRUCTURES |
| ONORM EN 1090-3 : 2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| EN 9223-102:2018 | Programme Management - Configuration Management - Part 102: Configuration status accounting |
| UNI EN 9120 : 2010 | QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR AVIATION, SPACE AND DEFENCE DISTRIBUTORS |
| EN 9223-105:2018 | Programme Management - Configuration Management - Part 105: Glossary |
| I.S. EN 15619:2014 | RUBBER OR PLASTIC COATED FABRICS - SAFETY OF TEMPORARY STRUCTURES (TENTS) - SPECIFICATION FOR COATED FABRICS INTENDED FOR TENTS AND RELATED STRUCTURES |
| BS EN 1090-3:2008 | Execution of steel structures and aluminium structures Technical requirements for aluminium structures |
| I.S. EN 16679:2014 | PACKAGING - TAMPER VERIFICATION FEATURES FOR MEDICINAL PRODUCT PACKAGING |
| EN ISO/TS 15874-7 : 2003 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYPROPYLENE (PP) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| DIN EN 1822-5:2011-01 | HIGH EFFICIENCY AIR FILTERS (EPA, HEPA AND ULPA) - PART 5: DETERMINING THE EFFICIENCY OF FILTER ELEMENTS |
| I.S. EN 1822-5:2009 | HIGH EFFICIENCY AIR FILTERS (EPA, HEPA AND ULPA) - PART 5: DETERMINING THE EFFICIENCY OF FILTER ELEMENTS |
| EN 1822-5:2009 | High efficiency air filters (EPA, HEPA and ULPA) - Part 5: Determining the efficiency of filter elements |
| EN 285:2015 | Sterilization - Steam sterilizers - Large sterilizers |
| DIN EN 13261:2011-01 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - AXLES - PRODUCT REQUIREMENTS |
| DIN EN 13262:2011-06 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - WHEELS - PRODUCT REQUIREMENTS |
| DIN EN 1422:2014-08 | STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS |
| DIN EN 12952-6:2011-10 | Water-tube boilers and auxiliary installations - Part 6: Inspection during construction; documentation and marking of pressure parts of the boiler |
| DIN EN ISO 22000:2005-11 | FOOD SAFETY MANAGEMENT SYSTEMS - REQUIREMENTS FOR ANY ORGANIZATION IN THE FOOD CHAIN |
| 10/30214967 DC : 0 | BS EN 14588 - SOLID BIOFUELS - TERMINOLOGY, DEFINITIONS AND DESCRIPTIONS |
| BS EN 14996:2006 | Water quality. Guidance on assuring the quality of biological and ecological assessments in the aquatic environment |
| BS EN 13980:2002 | Potentially explosive atmospheres. Application of quality systems |
| UNE-EN 12159:2013 | Builders hoists for persons and materials with vertically guided cages |
| BS EN 450-2:2005 | Fly ash for concrete Conformity evaluation |
| I.S. EN ISO 13485:2016 | MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR REGULATORY PURPOSES (ISO 13485:2016) |
| BS EN 15038:2006 | Translation services. Service requirements |
| EN 197-2:2014 | Cement - Part 2: Conformity evaluation |
| UNE-EN 505:2013 | Roofing products from metal sheet - Specification for fully supported roofing products of steel sheet |
| BS EN ISO 16426:2002 | Fasteners. Quality assurance system |
| BS EN ISO 16091:2002 | Space systems. Integrated logistic support |
| BS EN 13913:2003 | Railway applications. Rubber suspension components. Elastomer-based mechanical parts |
| BS EN 13802:2013 | Railway applications. Suspension components. Hydraulic dampers |
| BS EN 14508:2016 | Postal services. Quality of service. Measurement of the transit time of end-to-end services for single piece non-priority mail and second class mail |
| BS EN 13261 : 2009 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - AXLES - PRODUCT REQUIREMENTS |
| BS EN 487:2009 | Aluminium and aluminium alloys. Rolling ingots. Specifications |
| BS EN 15424:2007 | Sterilization of medical devices. Low temperature steam and formaldehyde. Requirements for development, validation and routine control of a sterilization process for medical devices |
| ISO 17511:2003 | In vitro diagnostic medical devices Measurement of quantities in biological samples Metrological traceability of values assigned to calibrators and control materials |
| BS EN 13597:2003 | Railway applications. Rubber suspension components. Rubber diaphragms for pneumatic suspension springs |
| BS EN 12159:2012 | Builders hoists for persons and materials with vertically guided cages |
| BS EN 505:2013 | Roofing products from metal sheet. Specification for fully supported roofing products of steel sheet |
| DIN EN 1422:1997-11 | STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 13263-2:2005 | SILICA FUME FOR CONCRETE - PART 2: CONFORMITY EVALUATION |
| DIN EN 12899-4:2008-02 | Fixed, vertical road traffic signs - Part 4: Factory production control |
| I.S. EN 12259-1:1999 | FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR SPRINKLER AND WATER SPRAY SYSTEMS - PART 1: SPRINKLERS |
| EN 15357:2011 | Solid recovered fuels - Terminology, definitions and descriptions |
| CEN/TS 16800:2015 | Guideline for the validation of physico-chemical analytical methods |
| DIN EN 14996:2006-08 | Water quality - Guidance on assuring the quality of biological and ecological assessments in the aquatic environment |
| EN 13263-2:2005+A1:2009 | Silica fume for concrete - Part 2: Conformity evaluation |
| EN 61249-4-5:2005 | Materials for printed boards and other interconnecting structures - Part 4-5: Sectional specification set for prepreg materials, unclad - Polyimide, modified or unmodified, woven E-glass prepreg of defined flammability |
| EN 1337-8:2007 | Structural bearings - Part 8: Guide Bearings and Restraint Bearings |
| EN 10266:2003 | Steel tubes, fittings and structural hollow sections - Symbols and definitions of terms for use in product standards |
| EN 12967-2:2007 | Health informatics - Service architecture - Part 2: Information viewpoint |
| EN 61249-2-37:2009 | Materials for printed boards and other interconnecting structures - Part 2-37: Reinforced base materials, clad and unclad - Modified non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly |
| EN 50365:2002 | Electrically insulating helmets for use on low voltage installations |
| CEN/TS 13598-3:2012 | Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride)(PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3: Guidance for assessment of conformity |
| CEN/TS 15718:2011 | Railway applications - Wheelsets and bogies - Product requirements for cast wheels |
| EN 12899-4:2007 | Fixed, vertical road traffic signs - Part 4: Factory production control |
| EN 12798:2007 | Transport Quality Management System - Road, Rail and Inland navigation transport - Quality management system requirements to supplement EN ISO 9001 for the transport of dangerous goods with regard to safety |
| EN 12952-5:2011 | Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler |
| EN 60966-3:2009 | Radio frequency and coaxial cable assemblies - Part 3: Sectional specification for semi-flexible coaxial cable assemblies |
| EN 62304:2006/A1:2015 | MEDICAL DEVICE SOFTWARE - SOFTWARE LIFE-CYCLE PROCESSES (IEC 62304:2006/A1:2015) |
| EN 61249-4-19:2013 | Materials for printed boards and other interconnecting structures - Part 4-19: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - High performance non-halogenated epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly |
| EN 12967-3:2007 | Health informatics - Service architecture - Part 3: Computational viewpoint |
| EN 61478:2001/A1:2003 | LIVE WORKING - LADDERS OF INSULATING MATERIAL |
| EN 13428:2004 | Packaging - Requirements specific to manufacturing and composition - Prevention by source reduction |
| CEN/TR 15592:2007 | Health services - Quality management systems - Guide for the use of EN ISO 9004:2000 in health services for performance improvement |
| EN 15628:2014 | Maintenance - Qualification of maintenance personnel |
| EN 61508-2:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems |
| EN 61249-4-15 : 2009 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-15: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD (FOR THE MANUFACTURE OF MULTILAYER BOARDS) - MULTIFUNCTIONAL EPOXIDE WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST) FOR LEAD-FREE ASSEMBLY |
| EN 61249-4-2:2005 | Materials for printed boards and other interconnecting structures - Part 4-2: Sectional specification set for prepreg materials, unclad - Multifunctional epoxide woven E-glass prepreg of defined flammability |
| EN 60870-5-6:2009 | Telecontrol equipment and systems - Part 5-6: Guidelines for conformance testing for the EN 60870-5 companion standards |
| EN 12966-3:2005 | Road vertical signs - Variable message traffic signs - Part 3: Factory production control |
| CEN/TS 15674:2007 | Air quality - Measurement of stationary source emissions - Guidelines for the elaboration of standardised methods |
| EN 61249-2-1:2005 | Materials for printed boards and other interconnecting structures - Part 2-1: Reinforced base materials, clad and unclad - Phenolic cellulose paper reinforced laminated sheets, economic grade, copper-clad |
| CEN/TS 15472:2016 | Postal services - Method for measurement of parcel transit time for cross-border parcels within the European Union and EFTA using Tracking and Tracing |
| CEN/TS 16919:2016 | Postal services - Interface and data transfer format for capturing postal automation events IDT-PAE |
| EN 15224:2016 | Quality management systems - EN ISO 9001:2015 for healthcare |
| EN 15234-1:2011 | Solid biofuels - Fuel quality assurance - Part 1: General requirements |
| CEN/TR 15941:2010 | Sustainability of construction works - Environmental product declarations - Methodology for selection and use of generic data |
| EN 12258-2:2004 | Aluminium and aluminium alloys - Terms and definitions - Part 2: Chemical analysis |
| EN 13263-1:2005+A1:2009 | Silica fume for concrete - Part 1: Definitions, requirements and conformity criteria |
| EN 13549:2001 | Cleaning services - Basic requirements and recommendations for quality measuring systems |
| CEN/TR 16862:2015 | Plastics welding supervisor - Task, responsibilities, knowledge, skills and competence |
| CEN/TS 15357:2006 | Solid recovered fuels - Terminology, definitions and descriptions |
| DIN EN 1090-2:2011-10 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| EN 60966-4:2003 | Radio frequency and coaxial cable assemblies - Part 4: Sectional specification for semi-rigid coaxial cable assemblies |
| EN 14588:2010 | Solid biofuels - Terminology, definitions and descriptions |
| EN 62282-3-200:2016 | Fuel cell technologies - Part 3-200: Stationary fuel cell power systems - Performance test methods |
| DIN EN 15424:2007-08 | STERILIZATION OF MEDICAL DEVICES - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| CEN/TS 15234:2006 | Solid biofuels - Fuel quality assurance |
| EN 13352:2012 | Specification for the performance of automatic tank contents gauges |
| EN 12966-2:2005 | Road vertical signs - Variable message traffic signs - Part 2: Initial type testing |
| EN 1325-2:2004 | Value Management, Value Analysis, Functional Analysis vocabulary - Part 2: Value Management |
| EN 61249-2-26:2005 | Materials for printed boards and other interconnecting structures - Part 2-26: Reinforced base materials, clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
| EN 15331:2011 | Criteria for design, management and control of maintenance services for buildings |
| EN 1337-6:2004 | Structural bearings - Part 6: Rocker bearings |
| EN 61230:2008 | LIVE WORKING - PORTABLE EQUIPMENT FOR EARTHING OR EARTHING AND SHORT-CIRCUITING |
| CEN/TS 15675:2007 | Air quality - Measurement of stationary source emissions - Application of EN ISO/IEC 17025:2005 to periodic measurements |
| EN 12186:2014 | Gas infrastructure - Gas pressure regulating stations for transmission and distribution - Functional requirements |
| EN 12899-5:2007 | Fixed, vertical road traffic signs - Part 5: Initial type testing |
| EN 62507-1:2011 | Identification systems enabling unambiguous information interchange - Requirements - Part 1: Principles and methods |
| EN 13213:2001 | Hollow floors |
| EN 61249-2-18:2002 | Materials for printed boards and other interconnecting structures - Part 2-18: Reinforced base materials, clad and unclad - Polyester non-woven fibreglass reinforced laminated sheet of defined flammability (vertical burning test), copper-clad |
| EN 61249-4-16:2009 | Materials for printed boards and other interconnecting structures - Part 4-16: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Multifunctional non-halogenated epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly |
| EN 15358:2011 | Solid recovered fuels - Quality management systems - Particular requirements for their application to the production of solid recovered fuels |
| EN 61193-3:2013 | Quality assessment systems - Part 3: Selection and use of sampling plans for printed board and laminate end-product and in-process auditing |
| DIN EN 13889:2009-02 | FORGED STEEL SHACKLES FOR GENERAL LIFTING PURPOSES - DEE SHACKLES AND BOW SHACKLES, GRADE 6 - SAFETY |
| VDI/VDE 2180 Blatt 6:2013-06 | Safeguarding of industrial process plants by means of process control engineering (PCE) - Application of functional safety in the context of explosion protection |
| EN 50207:2000 | Railway applications - Electronic power converters for rolling stock |
| DIN EN 15221-3:2011-12 | Facility Management - Part 3: Guidance on quality in Facility Management |
| BS EN 61751:1998 | Laser modules used for telecommunication. Reliability assessment |
| I.S. EN ISO/TS 15876-7:2004 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYBUTYLENE (PB) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| CEI EN 61249-2-37 : 2010 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-37: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - MODIFIED NON-HALOGENATED EPOXIDE WOVEN E-GLASS LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY |
| 14/30295890 DC : 0 | BS EN 1330-1 - NON-DESTRUCTIVE TESTING - TERMINOLOGY - PART 1: LIST OF GENERAL TERMS |
| BS EN 61249-4-16:2009 | Materials for printed boards and other interconnecting structures Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards). Multifunctional non-halogenated epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly |
| DIN EN 16114:2011-12 | MANAGEMENT CONSULTANCY SERVICES |
| I.S. EN 285:2015 | STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS |
| 14/30285784 DC : 0 | BS EN 16730 - RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS WITH UNDER SLEEPER PADS |
| BS EN 61249-2-1:2005 | Materials for printed boards and other interconnecting structures Reinforced base materials, clad and unclad. Phenolic cellulose paper reinforced laminated sheets, economic grade, copper-clad |
| EN 12764:2015 | Sanitary appliances - Specification for whirlpool baths |
| 10/30234625 DC : 0 | BS EN 14420-1 - HOSE FITTINGS WITH CLAMP UNITS - PART 1: REQUIREMENTS, SURVEY, DESIGNATION AND TESTING |
| DIN EN 13480 Beiblatt 1:2002-08 | Metallic industrial piping - Part 7: Guidance on the use of conformity assessment procedures |
| 14/30301120 DC : 0 | BS EN 4677-001 - AEROSPACE SERIES - WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS - JOINTS OF METALLIC MATERIALS BY ELECTRON BEAM WELDING - PART 001: QUALITY OF WELDED ASSEMBLIES |
| I.S. EN 61249-2-23:2005 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-23: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - NON-HALOGENATED PHENOLIC CELLULOSE PAPER REINFORCED LAMINATED SHEETS, ECONOMIC GRADE, COPPER-CLAD |
| I.S. EN 45510-2-9:2008 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-9: ELECTRICAL EQUIPMENT - CABLING SYSTEMS |
| PD CEN/TR 16862:2015 | Plastics welding supervisor. Task, responsibilities, knowledge, skills and competence |
| BS EN 61249-2-6:2003 | Materials for printed boards and other interconnecting structures Reinforced base materials, clad and unclad - Brominated epoxide non-woven/woven E-glass glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
| BS EN 16311:2013 | Engineering services. Terminology to describe engineering services for industrial products |
| 06/30150265 DC : 0 | EN 1474-1 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS |
| 13/30280729 DC : 0 | BS EN 12186 - GAS INFRASTRUCTURE - GAS PRESSURE REGULATING STATIONS FOR TRANSMISSION AND DISTRIBUTION - FUNCTIONAL REQUIREMENTS |
| UNI EN 16431 : 2014 | RAILWAY APPLICATIONS - TRACK - HOLLOW SLEEPERS AND BEARERS |
| PREN 1090-3 : DRAFT 2017 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| BS EN 62507-1:2011 | Identification systems enabling unambiguous information interchange. Requirements Principles and methods |
| BS EN 50365:2002 | Electrically insulating helmets for use on low voltage installations |
| DIN EN 15234-1:2011-05 | Solid biofuels - Fuel quality assurance - Part 1: General requirements |
| BS EN 61249-2-42:2010 | Materials for printed boards and other interconnecting structures Reinforced base materials clad and unclad. Brominated epoxide non-woven / woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly |
| BS EN 61249-4-12:2005 | Materials for printed boards and other interconnecting structures Sectional specification set for prepreg materials, unclad. Non-halogenated multifuctional epoxide woven E-glass prepeg of defined flammability |
| 17/30355946 DC : 0 | BS ISO 21976 - PACKAGING - TAMPER VERIFICATION FEATURES FOR MEDICINAL PRODUCT PACKAGING |
| 15/30323537 DC : 0 | BS EN 16887 - LEATHER - ENVIRONMENTAL FOOTPRINT - PRODUCT CATEGORY RULES (PCR) - CARBON FOOTPRINTS |
| BS EN 50397-2:2009 | Covered conductors for overhead lines and the related accessories for rated voltages above 1 kV AC and not exceeding 36 kV AC Accessories for covered conductors. Tests and acceptance criteria |
| BS EN 61249-4-5:2005 | Materials for printed boards and other interconnecting structures Sectional specification set for prepreg materials, unclad Polymide, modified or unmodified, woven E-glass prepeg of defined flammability |
| DIN EN 15001-1:2011-02 | Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
| I.S. EN 15628:2014 | MAINTENANCE - QUALIFICATION OF MAINTENANCE PERSONNEL |
| I.S. EN ISO 21351:2005 | SPACE SYSTEMS - FUNCTIONAL AND TECHNICAL SPECIFICATIONS |
| I.S. EN 1614:2006 | HEALTH INFORMATICS - REPRESENTATION OF DEDICATED KINDS OF PROPERTY IN LABORATORY MEDICINE |
| PD CEN/TS 13598-3:2012 | Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride)(PVC-U), polypropylene (PP) and polyethylene (PE) Guidance for assessment of conformity |
| 02/400807 DC : DRAFT SEP 2002 | BS EN 14534 - POSTAL SERVICES - QUALITY OF SERVICE - MEASUREMENT OF THE TRANSIT TIME OF END-TO-END SERVICES FOR BULK MAIL |
| PD CEN/TR 15569:2009 | Solid biofuels. A guide for a quality assurance system |
| 03/310083 DC : DRAFT JUNE 2003 | BS EN 14730-2 - RAILWAY APPLICATIONS - TRACK - WELDING OF RAILS - PART 2: QUALIFICATION OF ALUMINOTHERMIC WELDERS, APPROVAL OF CONTRACTORS AND ACCEPTANCE OF WELDS |
| BS EN ISO/IEC 80079-34:2011 | Explosive atmospheres Application of quality systems for equipment manufacture |
| BS EN 60936-1:2000 | Maritime navigation and radiocommunication equipment and systems. Radar Shipborne radar. Performance requirements. Methods of testing and required test results |
| 12/30256977 DC : 0 | BS EN 15619 - RUBBER OR PLASTIC COATED FABRICS - SAFETY OF TEMPORARY STRUCTURES (TENTS) - SPECIFICATION FOR COATED FABRICS INTENDED FOR TENTS AND RELATED STRUCTURES |
| 02/711948 DC : DRAFT OCT 2002 | SPACE SYSTEMS - FUNCTIONAL AND TECHNICAL SPECIFICATIONS |
| 16/30339543 DC : 0 | BS EN 62820-3-2 ED 1.0 - BUILDING INTERCOM SYSTEMS - PART 3-2: APPLICATION GUIDELINES - ADVANCED SECURITY BUILDING INTERCOM |
| I.S. EN 60966-2-1:2009 | RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 2-1: SECTIONAL SPECIFICATION FOR FLEXIBLE COAXIAL CABLE ASSEMBLIES |
| 01/106279 DC : 0 | PREN 14229 - WOOD POLES FOR OVERHEAD LINES - REQUIREMENTS |
| 10/30236007 DC : 0 | BS EN 16214-1 - SUSTAINABLY PRODUCED BIOMASS FOR ENERGY APPLICATIONS - PRINCIPLES, CRITERIA, INDICATORS AND VERIFIERS FOR BIOFUELS AND BIOLIQUIDS - PART 1: TERMINOLOGY |
| UNI EN 16457 : 2014 | CHARACTERIZATION OF WASTE - FRAMEWORK FOR THE PREPARATION AND APPLICATION OF A TESTING PROGRAMME - OBJECTIVES, PLANNING AND REPORT |
| 05/30129859 DC : DRAFT FEB 2005 | EN 15161 - WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - INSPECTION, OPERATION, MAINTENANCE AND REPAIR |
| 99/707162 DC : DRAFT APR 99 | PREN 13480-5 - METALLIC INDUSTRIAL PIPING - PART 5: INSPECTION AND TESTING |
| 13/30278952 DC : 0 | BS EN 16372 - AESTHETIC SURGERY AND AESTHETIC NON-SURGICAL MEDICAL SERVICES |
| 03/102154 DC : DRAFT MAY 2003 | CEN TS 14632 - PLASTICS PIPING SYSTEMS FOR DRAINAGE, SEWERAGE AND WATER SUPPLY, PRESSURE AND NON-PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP) - GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| BS EN 61355:1997 | Classification and designation of documents for plants, systems and equipment |
| DD CEN/TS 15359:2006 | Solid recovered fuels. Specifications and classes |
| BS EN 61249-2-10:2003 | Materials for printed boards and other interconnecting structures Reinforced base materials clad and unclad. Cyanate ester, brominated epoxide, modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
| 15/30322457 DC : 0 | BS EN 9223-104 - PROGRAMME MANAGEMENT - CONFIGURATION MANAGEMENT - PART 104: CONFIGURATION CONTROL |
| BS EN 1474-3:2008 | Installation and equipment for liquefied natural gas. Design and testing of marine transfer systems Offshore transfer systems |
| I.S. EN 61193-3:2013 | QUALITY ASSESSMENT SYSTEMS - PART 3: SELECTION AND USE OF SAMPLING PLANS FOR PRINTED BOARD AND LAMINATE END-PRODUCT AND IN-PROCESS AUDITING (IEC 61193-3:2013 (EQV)) |
| BS EN 16679:2014 | Packaging. Tamper verification features for medicinal product packaging |
| 10/30216654 DC : 0 | BS EN 12842 - DUCTILE IRON FITTINGS FOR PVC-U OR PE PIPING SYSTEMS - REQUIREMENTS AND TEST METHODS |
| BS EN 15221-3:2011 | Facility Management Guidance on quality in Facility Management |
| DD CEN/TS 15234:2006 | Solid biofuels. Fuel quality assurance |
| 12/30254896 DC : 0 | BS EN 197-2 - CEMENT - PART 2: CONFORMITY EVALUATION |
| UNI CEN/TR 15569 : 2009 | SOLID BIOFUELS - A GUIDE FOR A QUALITY ASSURANCE SYSTEM |
| 01/107225 DC : DRAFT OCT 2001 | PREN 14250 - TIMBER STRUCTURES - PRODUCT REQUIREMENTS FOR PREFABRICATED TRUSSES USING PUNCHED METAL PLATE FASTENERS |
| 10/30219009 DC : 0 | BS EN 15234-1 - SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 1: GENERAL REQUIREMENTS |
| EN ISO 17511:2003 | In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values assigned to calibrators and control materials (ISO 17511:2003) |
| PD CEN/TR 16469:2013 | Hydrometry. Measurement of the rainfall intensity (liquid precipitation): requirements, calibration methods and field measurements |
| UNE-EN 9120:2011 | Quality Management Systems - Requirements for Aviation, Space and Defence Distributors |
| 15/30289283 DC : 0 | BS EN 14516 - BATHS FOR DOMESTIC PURPOSES |
| 17/30361562 DC : 0 | BS EN 4677-001 - AEROSPACE SERIES - WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS - JOINTS OF METALLIC MATERIALS BY ELECTRON BEAM WELDING - PART 001: QUALITY OF WELDED ASSEMBLIES |
| 06/30149867 DC : 0 | EN 15511 - POSTAL SERVICES - QUALITY OF SERVICE - INFORMATION AVAILABLE ON POSTAL SERVICES |
| PREN 1090-2 : DRAFT 2015 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| BS EN 61249-2-21:2003 | Materials for printed boards and other interconnecting structures Reinforced base materials, clad and unclad - Non-halogenated epoxide woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
| BS EN 61249-2-37:2009 | Materials for printed boards and other interconnecting structures Reinforced base materials, clad and unclad. Modified non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly |
| I.S. EN 16844:2017 | AESTHETIC MEDICINE SERVICES - NON-SURGICAL MEDICAL PROCEDURES |
| CEI EN 61249-2-23 : 2005 | MATERIAUX POUR CIRCUITS IMPRIMES ET AUTRES STRUCTURES D'INTERCONNEXION - PARTIE 2-23: MATERIAUX DE BASE RENFORCES, PLAQUES ET NON PLAQUES - FEUILLES STRATIFIEES RENFORCEES DE PAPIER CELLULOSE PHENOLIQUE NON HALOGENE, DE QUALITE ECONOMIQUE, PLAQUEES CUIVRE |
| UNE-CEN/TR 15628:2011 IN | Maintenance - Qualification of Maintenance personnel |
| DD CEN/TS 15718:2011 | Railway applications. Wheelsets and bogies. Product requirements for cast wheels |
| BS EN 61249-2-9:2003 | Materials for interconnection structures. Sectional specification set for reinforced base materials, clad and unclad Reinforced base materials clad and unclad. Bismaleimide/triazine, modified epoxide or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
| PREN 12186 : DRAFT 2013 | GAS INFRASTRUCTURE - GAS PRESSURE REGULATING STATIONS FOR TRANSMISSION AND DISTRIBUTION - FUNCTIONAL REQUIREMENTS |
| I.S. CEN TS 15234:2006 | SOLID BIOFUELS - FUEL QUALITY ASSURANCE |
| BS EN 61249-2-5:2003 | Materials for printed boards and other interconnecting structures Reinforced base materials, clad and unclad - Brominated epoxide cellulose paper reinforced core/woven E-glass reinforced surfaces laminated sheets of defined flammability (vertical burning test), copper-clad |
| 01/101336 DC : DRAFT JAN 2001 | PREN 13964 - SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS |
| 13/30282202 DC : 0 | BS EN 16622 - HYDRAULIC SILICA-CALCIUM FUME FOR CONCRETE - DEFINITIONS, REQUIREMENTS AND CONFORMITY CRITERIA |
| BS EN 15593:2008 | Packaging. Management of hygiene in the production of packaging for foodstuffs. Requirements |
| 08/30176347 DC : DRAFT MAR 2008 | BS ISO 12967-1 - HEALTH INFORMATICS - SERVICE ARCHITECTURE - PART 1: ENTERPRISE VIEWPOINT |
| CR 13695-2 : 2002 | PACKAGING - REQUIREMENTS FOR MEASURING AND VERIFYING THE FOUR HEAVY METALS AND OTHER DANGEROUS SUBSTANCES PRESENT IN PACKAGING, AND THEIR RELEASE INTO THE ENVIRONMENT - REQUIREMENTS FOR MEASURING AND VERIFYING DANGEROUS SUBSTANCES PRESENT IN PACKAGING, AND THEIR RELEASE INTO THE ENVIRONMENT |
| CEI EN 61249-4-2 : 2006 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES PART 4-2: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD - MULTIFUNCTIONAL EPOXIDE WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY |
| 08/30184312 DC : DRAFT SEP 2008 | BS EN 12952-6 - WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 6: INSPECTION DURING CONSTRUCTION; DOCUMENTATION AND MARKING OF PRESSURE PARTS OF THE BOILER |
| 07/30173607 DC : 0 | BS EN 15718 - RAILWAY APPLICATIONS - MONOBLOCK WHEEL PRODUCTS - CAST WHEELS |
| DD CEN/TS 15357:2006 | Solid recovered fuels. Terminology, definitions and descriptions |
| I.S. EN 61249-2-8:2003 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-8: REINFORCED BASE MATERIALS CLAD AND UNCLAD - MODIFIED BROMINATED EPOXIDE WOVEN FIBREGLASS REINFORCED LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
| I.S. EN ISO 17511:2003 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN BIOLOGICAL SAMPLES - METROLOGICAL TRACEABILITY OF VALUES ASSIGNED TO CALIBRATORS AND CONTROL MATERIALS |
| DD CEN/TS 12201-7:2003 | Plastics piping systems for water supply. Polyethylene (PE) Guidance for the assessment of conformity |
| CEI EN 60393-1 : 2010 | POTENTIOMETERS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION |
| UNI EN 15358 : 2011 | SOLID RECOVERED FUELS - QUALITY MANAGEMENT SYSTEMS - PARTICULAR REQUIREMENTS FOR THEIR APPLICATION TO THE PRODUCTION OF SOLID RECOVERED FUELS |
| CEN Guide 14:2010 | Common policy guidance for addressing standardisation on qualification of professions and personnel |
| UNE-EN 16114:2012 | Management consultancy services |
| I.S. EN 62366-1:2015 | MEDICAL DEVICES - PART 1: APPLICATION OF USABILITY ENGINEERING TO MEDICAL DEVICES |
| I.S. EN 15593:2008 | PACKAGING - MANAGEMENT OF HYGIENE IN THE PRODUCTION OF PACKAGING FOR FOODSTUFFS - REQUIREMENTS |
| DIN EN 16622:2016-02 | SILICA-CALCIUM FUME FOR CONCRETE - DEFINITIONS, REQUIREMENTS AND CONFORMITY CRITERIA |
| CEI EN 61249-2-9 : 2004 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-9: REINFORCED BASE MATERIALS CLAD AND UNCLAD - BISMALEIMIDE/TRIAZINE, MODIFIED EPOXIDE OR UNMODIFIED, WOVEN E-GLASS REINFORCED LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
| PREN 9223-104 : DRAFT 2016 | PROGRAMME MANAGEMENT - CONFIGURATION MANAGEMENT - PART 104: CONFIGURATION CONTROL |
| EN 14428:2015 | Shower enclosures - Functional requirements and test methods |
| UNE-EN 12764:2016 | Sanitary appliances - Specification for whirlpool baths |
| UNE-EN 15357:2012 | Solid recovered fuels - Terminology, definitions and descriptions |
| S.R. CWA 15833:2008 | HUMANITARIAN MINE ACTION - QUALITY MANAGEMENT - QUALITY ASSURANCE (QA) AND QUALITY CONTROL (QC) FOR MECHANICAL DEMINING |
| I.S. EN 61249-2-36:2009 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-36: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - EPOXIDE WOVEN E-GLASS LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY |
| I.S. EN 1325:2014 | VALUE MANAGEMENT - VOCABULARY - TERMS AND DEFINITIONS |
| EN 60601-1-10:2008/A1:2015 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-10: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR THE DEVELOPMENT OF PHYSIOLOGIC CLOSED-LOOP CONTROLLERS (IEC 60601-1-10:2007) |
| S.R. CWA 16275:2011 | GUIDELINES FOR THE SELECTION OF CONSULTANTS ADVISING SMES ON INTEGRATED QUALITY, ENVIRONMENT, HEALTH AND SAFETY MANAGEMENT SYSTEMS |
| I.S. EN 16323:2014 | GLOSSARY OF WASTEWATER ENGINEERING TERMS |
| CEI EN 61249-2-35 : 2010 | MATERIAUX POUR CIRCUITS IMPRIMES ET AUTRES STRUCTURES D'INTERCONNEXION - PARTIE 2-35: MATERIAUX DE BASE RENFORCES, PLAQUES ET NON PLAQUES - FEUILLES STRATIFIEES EN TISSU DE VERRE DE TYPE E EPOXYDE MODIFIE, PLAQUEES CUIVRE, D'INFLAMMABILITE DEFINIE (ESSAI DE COMBUSTION VERTICALE) POUR LES ASSEMBLAGES SANS PLOMB |
| I.S. EN 9277:2015 | AEROSPACE SERIES - PROGRAMME MANAGEMENT - GUIDE FOR THE MANAGEMENT OF SYSTEMS ENGINEERING |
| I.S. EN 16887:2017 | LEATHER - ENVIRONMENTAL FOOTPRINT - PRODUCT CATEGORY RULES (PCR) - CARBON FOOTPRINTS |
| I.S. EN ISO/IEC 80079-34:2011 | EXPLOSIVE ATMOSPHERES - PART 34: APPLICATION OF QUALITY SYSTEMS FOR EQUIPMENT MANUFACTURE |
| S.R. CEN TS 15675:2007 | AIR QUALITY - MEASUREMENT OF STATIONARY SOURCE EMISSIONS - APPLICATION OF EN ISO/IEC 17025:2005 TO PERIODIC MEASUREMENTS |
| I.S. CEN TS 15359:2006 | SOLID RECOVERED FUELS - SPECIFICATIONS AND CLASSES |
| I.S. EN 1090-3:2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| I.S. EN ISO 25424:2011 | STERILIZATION OF MEDICAL DEVICES - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| I.S. EN 13060:2014 | SMALL STEAM STERILIZERS |
| I.S. EN 61249-4-12:2005 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-12: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD - NON-HALOGENATED MULTIFUNCTIONAL EPOXIDE WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY |
| I.S. EN 16457:2014 | CHARACTERIZATION OF WASTE - FRAMEWORK FOR THE PREPARATION AND APPLICATION OF A TESTING PROGRAMME - OBJECTIVES, PLANNING AND REPORT |
| I.S. EN 50239:2018 | RAILWAY APPLICATIONS - RADIO REMOTE CONTROL SYSTEM OF TRACTION VEHICLE FOR SHUNTING APPLICATION |
| CEI UNI EN 12966-3 : 2009 | ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS - PART 3: FACTORY PRODUCTION CONTROL |
| I.S. CEN ISO TS 14907-1:2005 | ROAD TRANSPORT AND TRAFFIC TELEMATICS - ELECTRONIC FEE COLLECTION - TEST PROCEDURES FOR USER AND FIXED EQUIPMENT - PART 1: DESCRIPTION OF TEST PROCEDURES |
| 18/30365863 DC : 0 | BS EN 1337-1 - STRUCTURAL BEARINGS - PART 1: GENERAL |
| I.S. EN 61249-2-9:2003 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - REINFORCED BASE MATERIALS, CLAD AND UNCLAD - BISMALEIMIDE/TRIAZINE MODIFIED EPOXIDE OR UNMODIFIED, WOVEN E-GLASS REINFORCED LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
| I.S. EN 12764:2015 | SANITARY APPLIANCES - SPECIFICATION FOR WHIRLPOOL BATHS |
| I.S. EN 61249-2-35:2009 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-35: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - MODIFIED EPOXIDE WOVEN E-GLASS LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY |
| I.S. CR 13445-7:2002 | UNFIRED PRESSURE VESSELS - PART 7: GUIDANCE ON THE USE OF THE CONFORMITY PROCEDURES |
| S.R. CEN TS 15674:2007 | AIR QUALITY - MEASUREMENT OF STATIONARY SOURCE EMISSIONS - GUIDELINES FOR THE ELABORATION OF STANDARDISED METHODS |
| I.S. EN 61249-2-38:2009 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-38: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - NON-HALOGENATED EPOXIDE WOVEN E-GLASS LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY |
| PREN 752 : DRAFT 2015 | DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS - SEWER SYSTEM MANAGEMENT |
| I.S. EN 61249-4-1:2008 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-1: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD (FOR THE MANUFACTURE OF MULTILAYER BOARDS) - EPOXIDE WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY |
| EN 50239:2018 | Railway applications - Radio remote control system of traction vehicle for shunting application |
| EN 9223-100:2018 | Programme Management - Configuration Management - Part 100: A guide for the application of the principles of configuration management |
| NF EN 9110 : 2011 | QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR AVIATION MAINTENANCE ORGANIZATIONS |
| CEN/TR 13695-2:2004 | Packaging - Requirements for measuring and verifying the four heavy metals and other dangerous substances present in packaging, and their release into the environment - Part 2: Requirements for measuring and verifying dangerous substances present in packaging, and their release into the environment |
| ISO/TS 15875-7:2003 | Plastics piping systems for hot and cold water installations Crosslinked polyethylene (PE-X) Part 7: Guidance for the assessment of conformity |
| S.R. CLC/TR 50674:2018 | GUIDELINES FOR THE VERIFICATION OF HOUSEHOLD APPLIANCES UNDER ENERGY LABELLING AND ECO DESIGN |
| S.R. CEN/TS 16919:2016 | POSTAL SERVICES - INTERFACE AND DATA TRANSFER FORMAT FOR CAPTURING POSTAL AUTOMATION EVENTS IDT-PAE |
| BS EN 1090-2 : 2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| DIN EN 1090-2:2015-07 (Draft) | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| UNI EN 1090-2 : 2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| I.S. EN 14726:2005 | ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL ANALYSIS - GUIDELINE FOR SPARK OPTICAL EMISSION SPECTROMETRIC ANALYSIS |
| I.S. CEN TS 1555-7:2003 | PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| EN 62430:2009 | Environmentally conscious design for electrical and electronic products |
| DIN EN 197-2:2014-05 | CEMENT - PART 2: CONFORMITY EVALUATION |
| UNE-EN 12952-6:2012 | Water-tube boilers and auxiliary installations - Part 6: Inspection during construction; documentation and marking of pressure parts of the boiler |
| I.S. EN 1330-1:2014&LC:2015 | NON DESTRUCTIVE TESTING - TERMINOLOGY - PART 1: LIST OF GENERAL TERMS |
| I.S. EN 1474-2:2008 | INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 2: DESIGN AND TESTING OF TRANSFER HOSES |
| DIN EN 13263-2:2009-07 | SILICA FUME FOR CONCRETE - PART 2: CONFORMITY EVALUATION |
| DIN EN 12842:2012-11 | Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods |
| DIN EN 13352:2012-06 | Specification for the performance of automatic tank contents gauges |
| DIN EN 12159:2013-03 | Builders hoists for persons and materials with vertically guided cages |
| DIN EN 14679:2005-07 | Execution of special geotechnical works - Deep mixing |
| DIN EN 598:2009-10 | Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Requirements and test methods (includes Amendment A1:2009) |
| DIN EN 15259:2008-01 | Air quality - Measurement of stationary source emissions - Requirements for measurement sections and sites and for the measurement objective, plan and report |
| DIN EN 1337-6:2004-08 | Structural bearings - Part 6: Rocker bearings |
| DIN EN 505:2013-06 | ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STEEL SHEET |
| DIN EN 15049:2007-12 | Railway applications - Suspension components - Torsion bar, steel |
| BS EN 12899-4:2007 | Fixed, vertical road traffic signs Factory production control |
| UNE-EN 14080:2013 | Timber structures - Glued laminated timber and glued solid timber - Requirements |
| UNE-EN 14065:2017 | Textiles - Laundry processed textiles - Biocontamination control system |
| BS EN 1614:2006 | Health informatics. Representation of dedicated kinds of property in laboratory medicine |
| BS EN 598 : 2007 | DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR SEWERAGE APPLICATIONS - REQUIREMENTS AND TEST METHODS |
| DIN EN 15079:2015-07 | COPPER AND COPPER ALLOYS - ANALYSIS BY SPARK OPTICAL EMISSION SPECTROMETRY (S-OES) |
| UNE-EN 12186:2015 | Gas infrastructure - Gas pressure regulating stations for transmission and distribution - Functional requirements |
| 04/30124785 DC : 0 | EN 15069 - SAFETY GAS CONNECTION VALVES FOR METAL HOSE ASSEMBLIES USED FOR THE CONNECTION OF DOMESTIC APPLIANCES USING GASEOUS FUEL |
| BS EN 12435:2006 | Health informatics. Expression of results of measurements in health sciences |
| BS EN 287-1:2011 | Qualification test of welders. Fusion welding Steels |
| ISO 25424:2009 | Sterilization of medical devices Low temperature steam and formaldehyde Requirements for development, validation and routine control of a sterilization process for medical devices |
| BS EN 14516 : 2015 | BATHS FOR DOMESTIC PURPOSES |
| DIN EN 681-1:2006-11 | Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber |
| I.S. EN 12507:2005 | TRANSPORTATION SERVICES - GUIDANCE NOTES ON THE APPLICATION OF EN ISO 9001:2000 TO THE ROAD TRANSPORTATION, STORAGE, DISTRIBUTION AND RAILWAY GOODS INDUSTRIES |
| I.S. EN 486:2009 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUSION INGOTS - SPECIFICATIONS |
| I.S. EN 13428:2004 | PACKAGING - REQUIREMENTS SPECIFIC TO MANUFACTURING AND COMPOSITION - PREVENTION BY SOURCE REDUCTION |
| I.S. EN 14508:2016 | POSTAL SERVICES - QUALITY OF SERVICE - MEASUREMENT OF THE TRANSIT TIME OF END-TO-END SERVICES FOR SINGLE PIECE NON-PRIORITY MAIL AND SECOND CLASS MAIL |
| I.S. EN 12798:2007 | TRANSPORT QUALITY MANAGEMENT SYSTEM - ROAD, RAIL AND INLAND NAVIGATION TRANSPORT - QUALITY MANAGEMENT SYSTEM REQUIREMENTS TO SUPPLEMENT EN ISO 9001 FOR THE TRANSPORT OF DANGEROUS GOODS WITH REGARD TO SAFETY |
| I.S. EN 598:2007 | DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR SEWERAGE APPLICATIONS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 14065:2016 | TEXTILES - LAUNDRY PROCESSED TEXTILES - BIOCONTAMINATION CONTROL SYSTEM |
| I.S. EN 12842:2012 | DUCTILE IRON FITTINGS FOR PVC-U OR PE PIPING SYSTEMS - REQUIREMENTS AND TEST METHODS |
| DIN EN 14420-1:2013-09 | Hose fittings with clamp units - Part 1: Requirements, types of fixing and connection, designation and testing |
| DIN EN 1776:2016-05 | GAS INFRASTRUCTURE - GAS MEASURING SYSTEMS - FUNCTIONAL REQUIREMENTS |
| I.S. EN 13889:2003 | FORGED STEEL SHACKLES FOR GENERAL LIFTING PURPOSES - DEE SHACKLES AND BOW SHACKLES - GRADE 6 - SAFETY |
| I.S. EN 12952-6:2011 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 6: INSPECTION DURING CONSTRUCTION; DOCUMENTATION AND MARKING OF PRESSURE PARTS OF THE BOILER |
| I.S. EN 505:2013 | ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STEEL SHEET |
| DIN EN 12878:1999-09 | PIGMENTS FOR THE COLOURING OF BUILDING MATERIALS BASED ON CEMENT AND/OR LIME - SPECIFICATIONS AND METHODS OF TEST |
| DIN EN 12899-5:2008-02 | Fixed, vertical road traffic signs - Part 5: Initial type testing |
| DIN EN 197-2:2000-11 | CEMENT - PART 2: CONFORMITY EVALUATION |
| I.S. EN 13263-1:2005 | SILICA FUME FOR CONCRETE - PART 1: DEFINITIONS, REQUIREMENTS AND CONFORMITY CRITERIA |
| I.S. EN 15079:2015 | COPPER AND COPPER ALLOYS - ANALYSIS BY SOURCE OPTICAL EMISSION SPECTROMETRY (S-OES) |
| I.S. EN 12186:2014 | GAS INFRASTRUCTURE - GAS PRESSURE REGULATING STATIONS FOR TRANSMISSION AND DISTRIBUTION - FUNCTIONAL REQUIREMENTS |
| I.S. EN 13352:2012 | SPECIFICATION FOR THE PERFORMANCE OF AUTOMATIC TANK CONTENTS GAUGES |
| I.S. EN 14180:2014 | STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING |
| I.S. EN 12878:2014 | PIGMENTS FOR THE COLOURING OF BUILDING MATERIALS BASED ON CEMENT AND/OR LIME - SPECIFICATIONS AND METHODS OF TEST |
| I.S. EN 1422:2014 | STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 12159:2012 | BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES |
| DIN EN 13597:2008-04 | Railway applications - Rubber suspension components - Rubber diaphragms for pneumatic suspension springs |
| I.S. EN 12952-5:2011 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 5: WORKMANSHIP AND CONSTRUCTION OF PRESSURE PARTS OF THE BOILER |
| DIN EN 14180:2003-10 | STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING |
| DIN EN 12966-3:2005-07 | ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS - PART 3: FACTORY PRODUCTION CONTROL |
| I.S. EN 502:2013 | ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STAINLESS STEEL SHEET |
| ONORM EN 1474-2 : 2009 | INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 2: DESIGN AND TESTING OF TRANSFER HOSES |
| I.S. EN 13802:2013 | RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - HYDRAULIC DAMPERS |
| I.S. EN 1776:2015 | GAS INFRASTRUCTURE - GAS MEASURING SYSTEMS - FUNCTIONAL REQUIREMENTS |
| I.S. EN 487:2009 | ALUMINIUM AND ALUMINIUM ALLOYS - ROLLING INGOTS - SPECIFICATIONS |
| DIN EN 14585-1 Beiblatt 1:2006-04 | Corrugated metal hose assemblies for pressure applications - Part 2: Guidance on the use of conformity assessment procedures |
| I.S. EN 14359:2017 | GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS |
| I.S. EN 599-1:2009 | DURABILITY OF WOOD AND WOOD-BASED PRODUCTS - EFFICACY OF PREVENTIVE WOOD PRESERVATIVES AS DETERMINED BY BIOLOGICAL TESTS - PART 1: SPECIFICATION ACCORDING TO USE CLASS |
| I.S. EN 14420-1:2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 1: REQUIREMENTS, TYPES OF FIXING AND CONNECTION, DESIGNATION AND TESTING |
| UNI EN 502 : 2013 | ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STAINLESS STEEL SHEET |
| UNI EN 12878 : 2014 | PIGMENTS FOR THE COLOURING OF BUILDING MATERIALS BASED ON CEMENT AND/OR LIME - SPECIFICATIONS AND METHODS OF TEST |
| VDE 0674-1 : 2001-12 | TESTS ON INDOOR AND OUTDOOR POST INSULATORS OF CERAMIC MATERIAL OR GLASS FOR SYSTEMS WITH NOMINAL VOLTAGES GREATER THAN 1 KV |
| VDI/VDE 3699 Blatt 5:2014-09 | Process control using display screens - Alarms/messages |
| VDI 4066 Blatt 4:2016-04 | Hygiene requirements for the production and filling of dairy products without recontamination |
| VDI 2219:2016-09 | Information technology in product development - Introduction and usage of PDM systems |
| VDI 4500 Blatt 4:2011-12 | Technical documentation - Documentation process - Planning, layout, creation |
| VDI 4800 Blatt 1:2016-02 | Resource efficiency - Methodological principles and strategies |
| VDI/VDE 3511 Blatt 4.4:2005-07 | Temperature measurement in industry - Radiation thermometry - Calibration of radiation thermometers |
| KTA 3507 : 2014(R2017) | FACTORY TESTS, POST-REPAIR TESTS AND CERTIFICATION OF SATISFACTORY PERFORMANCE IN SERVICE OF MODULES AND DEVICES FOR THE INSTRUMENTATION AND CONTROLS OF THE SAFETY SYSTEM |
| VDI/VDE 2600 Blatt 1:2013-10 | Inspection process management - Identification, classification and proof of suitability for inspection processes |
| VDI/VDE 2862 Blatt 2:2015-02 | Minimum requirements for application of fastening systems and tools - Applications in plant construction, mechanical engineering, equipment manufacturing and for flange connections in components under pressure boundary |
| VDI/VDE 2634 Blatt 2:2012-08 | Optical 3-D measuring systems - Optical systems based on area scanning |
| VDI/VDE 3682 Blatt 1:2015-05 | Formalised process descriptions - Concept and graphic representation |
| VDI 4510:2006-05 | Engineering services and requirements to engineering service providers |
| VDI 2700 Blatt 5:2011-12 | Securing of loads on road vehicles - Quality management systems |
| VDI 4060 Blatt 2:2005-06 | Integrated Management Systems - Guidance for practical implementation - Case studies |
| VDI 3986:2014-07 | Determination of efficiencies of conventional power stations |
| VDI/VDE 2862 Blatt 1:2012-04 | Minimum restrictions for application of fastening systems and tools - Applications in the automotive industry |
| VDI 3786 Blatt 1:2013-08 | Environmental meteorology - Meteorological measurements - Fundamentals |
| VDI 3892:2015-03 | Emission control - Roasted-coffee-producing industry - Plants with a minimum daily output of at least 0,5 tonnes |
| VDI 4003:2007-03 | Reliability management |
| VDI 2870 Blatt 2:2013-02 | Lean production systems - List of methods |
| BS 5760-0:2014 | Reliability of systems, equipment and components Guide to reliability and maintainability |
| VDI 5600 Blatt 1:2016-10 | Manufacturing execution systems (MES) |
| VDI 4084:2017-09 (Draft) | Corrective maintenance and remanufacturing of internal combustion engines - Terminology and processes |
| VDI 5600 Blatt 3:2013-07 | Manufacturing Execution Systems (MES) - Logic interfaces for machine and plant control |
| VDI/VDE 3516 Blatt 1:1978-10 | Process analytical equipment |
| DIN EN 60168 : 2001-12 | TESTS ON INDOOR AND OUTDOOR POST INSULATORS OF CERAMIC MATERIAL OR GLASS FOR SYSTEMS WITH NOMINAL VOLTAGES GREATER THAN 1 KV |
| VDI 2209:2009-03 | 3D product modelling - Technical and organizational requirements - Procedures, tools, and applications - Cost-effective practical use |
| VDI 2870 Blatt 1:2012-07 | Lean production systems - Basic principles, introduction, and review |
| VDI 4060 Blatt 1:2005-06 | Integrated Management Systems - Guidance for practical implementation - General information |
| VDI 3894 Blatt 1:2011-09 | Emissions and immissions from animal husbandry - Housing systems and emissions - Pigs, cattle, poultry, horses |
| VDI 4256 Blatt 1:2010-10 | Bioaerosols and biological agents - Determination of performance characteristics - Culture-based counting methods |
| VDI 3431:2016-08 | Bending of profiles - Testing notes for profile bending elements |
| VDI/VDE 2645 Blatt 2:2014-09 | Capability test for fastening technology - Machine capability test - MCT |
| VDI/VDE 3528 Blatt 1:2017-06 | Requirements of commercial grade products and criteria for their use in the instrumentation and control systems important to safety in nuclear power plants - General part |
| VDI/VDE/DGQ/DKD 2622 Blatt 1:2014-06 | Calibration of measuring equipment for electrical quantities - Fundamentals |
| VDI 2083 Blatt 7:2015-10 | Cleanroom technology - Ultrapure media - Quality, supply, distribution |
| CEI EN 60966-4 : 2005 | RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 4: SECTIONAL SPECIFICATION FOR SEMI-RIGID COAXIAL CABLE ASSEMBLIES |
| CEI EN 60903 : 2005 | LIVE WORKING - GLOVES OF INSULATING MATERIAL IMPIANTI |
| I.S. EN 61751:1999 | LASER MODULES USED FOR TELECOMMUNICATION - RELIABILITY ASSESSMENT |
| 11/30250267 DC : 0 | BS EN 16323 - GLOSSARY OF WASTEWATER ENGINEERING TERMS |
| I.S. EN 15001-2:2008 | GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON INDUSTRIAL INSTALLATIONS - PART 2: DETAILED FUNCTIONAL REQUIREMENTS FOR COMMISSIONING, OPERATION AND MAINTENANCE |
| DIN EN 16751:2016-06 | BIO-BASED PRODUCTS - SUSTAINABILITY CRITERIA |
| 10/30227686 DC : 0 | BS EN 13352 - SPECIFICATION FOR THE PERFORMANCE OF AUTOMATIC TANK CONTENTS GAUGES |
| DIN EN 1337-8:2008-01 | STRUCTURAL BEARINGS - PART 8: GUIDE BEARINGS AND RESTRAINT BEARINGS |
| 17/30364387 DC : 0 | BS EN 50069 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - GAS-FILLED WELDED COMPOSITE ENCLOSURES OF CAST AND WROUGHT ALUMINIUM ALLOYS |
| CEI EN 60895 : 2005 | LIVE WORKING - CONDUCTIVE CLOTHING FOR USE AT NOMINAL VOLTAGE UP TO 800 KV AC AND (+/-) 600 KV DC |
| PREN 12842 : DRAFT 2010 | DUCTILE IRON FITTINGS FOR PVC-U OR PE PIPING SYSTEMS - REQUIREMENTS AND TEST METHODS |
| DIN EN 13670:2011-03 | Execution of concrete structures |
| BS EN 50128:2011 | Railway applications. Communication, signalling and processing systems. Software for railway control and protection systems |
| BS EN 61249-2-35:2009 | Materials for printed boards and other interconnecting structures Reinforced base materials, clad and unclad. Modified epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly |
| DD CEN/TS 1852-2:2009 | Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene (PP) Guidance for the assessment of conformity |
| 03/319909 DC : DRAFT NOV 2003 | BS EN 14817 - RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - AIR-SPRING CONTROL ELEMENTS |
| I.S. EN 450-2:2005 | FLY ASH FOR CONCRETE - PART 2: CONFORMITY EVALUATION |
| I.S. EN 306:1997 | HEAT EXCHANGERS - METHODS OF MEASURING THE PARAMETERS NECESSARY FOR ESTABLISHING THE PERFORMANCE |
| BS EN 61249-4-19:2013 | Materials for printed boards and other interconnecting structures Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards). High performance non-halogenated epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly |
| BS EN 17007:2017 | Maintenance process and associated indicators |
| BS EN 15358:2011 | Solid recovered fuels. Quality management systems. Particular requirements for their application to the production of solid recovered fuels |
| BS EN 13670:2009 | Execution of concrete structures |
| I.S. EN 12966-3:2005 | ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS - PART 3: FACTORY PRODUCTION CONTROL |
| 14/30304489 DC : 0 | BS EN 9277 - AEROSPACE SERIES - PROGRAMME MANAGEMENT - GUIDE FOR THE MANAGEMENT OF SYSTEM ENGINEERING |
| BS EN 61249-2-38:2009 | Materials for printed boards and other interconnecting structures Reinforced base materials, clad and unclad. Non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly |
| 11/30215034 DC : DRAFT MAR 2011 | BS EN 12159 - BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES |
| BS EN 61249-2-19:2002 | Materials for interconnection structures. Sectional specification set for reinforced base materials, clad and unclad Epoxide cross-plied linear fibreglass-reinforced laminated sheets of defined flammability (vertical burning test) copper clad |
| EN 50657:2017 | Railways Applications - Rolling stock applications - Software on Board Rolling Stock |
| PD CEN/TS 15472:2016 | Postal services. Method for measurement of parcel transit time for cross-border parcels within the European Union and EFTA using Tracking and Tracing |
| 15/30317874 DC : 0 | BS EN 16844 - AESTHETIC MEDICINE SERVICES - NON-SURGICAL MEDICAL PROCEDURES |
| DIN EN 16679:2015-03 | PACKAGING - TAMPER VERIFICATION FEATURES FOR MEDICINAL PRODUCT PACKAGING |
| BS EN 61249-4-15:2009 | Materials for printed boards and other interconnecting structures Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards). Multifunctional epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly |
| DIN EN 15357:2011-05 | Solid recovered fuels - Terminology, definitions and descriptions |
| PD CEN/TS 16919:2016 | Postal services. Interface and data transfer format for capturing postal automation events IDT-PAE |
| PD CEN/TR 15809:2008 | Characterization of sludges. Hygienic aspects. Treatments |
| BS EN 61249-4-17:2009 | Materials for printed boards and other interconnecting structures Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards). Non-halogenated epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly |
| UNE-EN 16214-1:2013 | Sustainability criteria for the production of biofuels and bioliquids for energy applications - Principles, criteria, indicators and verifiers - Part 1: Terminology |
| BS EN 50657:2017 | Railways Applications. Rolling stock applications. Software on Board Rolling Stock |
| BS EN 61249-4-1:2008 | Materials for printed boards and other interconnecting structures Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards). Epoxide woven E-glass prepreg of defined flammability |
| EN 62282-4-102:2017 | Fuel cell technologies - Part 4-102: Fuel cell power systems for industrial electric trucks - Performance test methods |
| UNI EN 15221-4 : 2011 | FACILITY MANAGEMENT - PART 4: TAXONOMY, CLASSIFICATION AND STRUCTURES IN FACILITY MANAGEMENT |
| 09/30194526 DC : 2009 | BS EN 15331 - CRITERIA FOR DESIGN, MANAGEMENT AND CONTROL OF MAINTENANCE SERVICES FOR BUILDINGS |
| BS EN 16310:2013 | Engineering services. Terminology to describe engineering services for buildings, infrastructure and industrial facilities |
| PREN 50069 : DRAFT 2017 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - GAS-FILLED WELDED COMPOSITE ENCLOSURES OF CAST AND WROUGHT ALUMINIUM ALLOYS |
| PD CEN/TS 16800:2015 | Guideline for the validation of physico-chemical analytical methods |
| PD CR 13445-7:2002 | Unfired pressure vessels Guidance on the use of the conformity procedures |
| 12/30257022 DC : 0 | BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - GENERAL REQUIREMENTS |
| S.R. CEN TR 13695-2:2004 | PACKAGING - REQUIREMENTS FOR MEASURING AND VERIFYING THE FOUR HEAVY METALS AND OTHER DANGEROUS SUBSTANCES PRESENT IN PACKAGING, AND THEIR RELEASE INTO THE ENVIRONMENT - PART 2: REQUIREMENTS FOR MEASURING AND VERIFYING DANGEROUS SUBSTANCES PRESENT IN PACKAGING, AND THEIR RELEASE INTO THE ENVIRONMENT |
| UNI EN ISO 25424 : 2011 | STERILIZATION OF MEDICAL DEVICES - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| CEI CECC 200025 : 2000 | PROCESS ASSESSMENT SCHEDULE: PRINTED BOARD ASSEMBLY FACILITIES |
| I.S. EN 16265:2015 | PYROTECHNIC ARTICLES - OTHER PYROTECHNIC ARTICLES - IGNITION DEVICES |
| BS EN 16887:2017 | Leather. Environmental footprint. Product Category Rules (PCR). Carbon footprints |
| 12/30250634 DC : 0 | BS EN 13802 - RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - HYDRAULIC DAMPERS |
| DIN EN ISO/IEC 80079-34:2012-03 | EXPLOSIVE ATMOSPHERES - PART 34: APPLICATION OF QUALITY SYSTEMS FOR EQUIPMENT MANUFACTURE (ISO/IEC 80079-34:2011) |
| BS EN 16263-1:2015 | Pyrotechnic articles. Other pyrotechnic articles Terminology |
| I.S. EN 16431:2014 | RAILWAY APPLICATIONS - TRACK - HOLLOW SLEEPERS AND BEARERS |
| UNE-EN 62304:2007 | Medical device software - Software life-cycle processes (IEC 62304:2006) |
| 12/30273046 DC : 0 | BS EN 15628 - MAINTENANCE - QUALIFICATION OF MAINTENANCE PERSONNEL |
| I.S. CEN TS 12666-2:2006 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| BS EN 60966-3:2009 | Radio frequency and coaxial cable assemblies Sectional specification for semi-flexible coaxial cable assemblies |
| BS EN 61204-6:2001 | Low voltage power supplies, d.c. output Requirements for low-voltage power supplies of assessed performance |
| BS PD TR 13480-7 : 2002 | METALLIC INDUSTRIAL PIPING - GUIDANCE ON THE USE OF CONFORMITY ASSESSMENT PROCEDURES |
| PD CEN/TR 15592:2007 | Health services. Quality management systems. Guide for the use of EN ISO 9004:2000 in health services for performance improvement |
| DIN EN 15359:2012-01 | Solid recovered fuels - Specifications and classes |
| BS EN 1337-8:2007 | Structural bearings Guide bearings and restraint bearings |
| 02/702684 DC : DRAFT FEB 2002 | PREN 14372 - CHILD USE AND CARE ARTICLES - CUTLERY AND FEEDING UTENSILS - SAFETY REQUIREMENTS AND TESTS |
| 02/106355 DC : DRAFT OCT 2002 | EN 12966-3 - VERTICAL ROAD - TRAFFIC SIGNS - PART 3: VARIABLE MESSAGE SIGNS - FACTORY PRODUCTION CONTROL |
| 05/30128234 DC : DRAFT FEB 2005 | EN 1473 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS |
| PD CEN/TS 1555-7:2013 | Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Guidance for the assessment of conformity |
| UNE-EN 15358:2011 | Solid recovered fuels - Quality management systems - Particular requirements for their application to the production of solid recovered fuels |
| DD CEN/TS 15674:2007 | Air quality. Measurement of stationary source emissions. Guidelines for the elaboration of standardised methods |
| DD CEN/TS 14773:2004 | Postal services. Quality of service. Measurement of loss and substantial delay of priority and first class single piece mail using a survey of test letters |
| 13/30279826 DC : 0 | BS EN 15551 - RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS |
| BS EN 1474-2:2008 | Installation and equipment for liquefied natural gas. Design and testing of marine transfer systems Design and testing of transfer hoses |
| BS EN 15221-5:2011 | Facility management Guidance on facility management processes |
| PD CLC/TR 50674:2018 | Guidelines for the verification of household appliances under energy labelling and eco design |
| UNE-EN 16457:2014 | Characterization of waste - Framework for the preparation and application of a testing programme - Objectives, planning and report |
| UNE-EN 16372:2015 | Aesthetic surgery services |
| BS EN 60936-2:1999 | Maritime navigation and radiocommunication equipment and systems. Radar Shipborne radar for high speed craft (HSC). Methods of testing and required test results |
| BS EN 45510-4-4:2002 | Guide for the procurement of power station equipment. Boiler auxiliaries Fuel preparation equipment |
| UNI EN 15331 : 2011 | CRITERIA FOR DESIGN, MANAGEMENT AND CONTROL OF MAINTENANCE SERVICES FOR BUILDINGS |
| CLC/TS 61111:2006 | Matting of insulating material for electrical purposes |
| UNI EN 16323 : 2014 | GLOSSARY OF WASTEWATER ENGINEERING TERMS |
| I.S. EN 16271:2012 | VALUE MANAGEMENT - FUNCTIONAL EXPRESSION OF THE NEED AND FUNCTIONAL PERFORMANCE SPECIFICATION - REQUIREMENTS FOR EXPRESSING AND VALIDATING THE NEED TO BE SATISFIED WITHIN THE PROCESS OF PURCHASING OR OBTAINING A PRODUCT |
| 15/30322445 DC : 0 | BS EN 9223-100 - PROGRAMME MANAGEMENT - CONFIGURATION MANAGEMENT - PART 100: A GUIDE FOR THE APPLICATION OF THE PRINCIPLES OF CONFIGURATION MANAGEMENT |
| 14/30281836 DC : 0 | BS ISO 8000-8 - DATA QUALITY - PART 8: INFORMATION AND DATA QUALITY: CONCEPTS AND MEASURING |
| BS EN 61193-3:2013 | Quality assessment systems Selection and use of sampling plans for printed board and laminate end-product and in-process auditing |
| BS EN 60966-4:2003 | Radio frequency and coaxial cable assemblies Sectional specification for semi-rigid coaxial cable assemblies |
| BS EN 60601-1-10 : 2008 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-10: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR THE DEVELOPMENT OF PHYSIOLOGIC CLOSED-LOOP CONTROLLERS |
| PD CR 14269:2001 | Chemicals used for treatment of water intended for human consumption. Guidelines for the purchase of products |
| 06/30152723 DC : DRAFT JULY 2006 | BS ISO 3545 - STEEL TUBES, FITTINGS AND STRUCTURAL HOLLOW SECTIONS - SYMBOLS AND DEFINITIONS OF TERMS FOR USE IN PRODUCT STANDARDS |
| DIN EN 15221-5:2011-12 | Facility Management - Part 5: Guidance on Facility Management processes |
| 02/104837 DC : 0 | PREN 12271-10 - SURFACE DRESSING - SPECIFICATIONS - PART 10: FACTORY PRODUCTION CONTROL |
| EN ISO/TS 15876-7 : 2003 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYBUTYLENE (PB) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| PREN 9223-101 : DRAFT 2016 | PROGRAMME MANAGEMENT - CONFIGURATION MANAGEMENT - PART 101: CONFIGURATION IDENTIFICATION |
| DIN EN 1474-3:2009-02 | INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 3: OFFSHORE TRANSFER SYSTEMS |
| PREN 50518 : DRAFT 2016 | MONITORING AND ALARM RECEIVING CENTRE |
| PREN 1337-1 : DRAFT 2018 | STRUCTURAL BEARINGS - PART 1: GENERAL |
| UNE-EN 1090-2:2011 | Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures |
| S.R. CEN TS 15511:2008 | POSTAL SERVICES - QUALITY OF SERVICE - INFORMATION AVAILABLE ON POSTAL SERVICES |
| S.R. CWA 15661:2007 | PROVIDING E-LEARNING SUPPLIES TRANSPARENCY PROFILES |
| DIN CEN/TS 15472;DIN SPEC 16590:2016-08 | POSTAL SERVICES - METHOD FOR MEASUREMENT OF PARCEL TRANSIT TIME FOR CROSS-BORDER PARCELS WITHIN THE EUROPEAN UNION AND EFTA USING TRACKING AND TRACING |
| UNI EN 16311 : 2013 | ENGINEERING SERVICES - TERMINOLOGY TO DESCRIBE ENGINEERING SERVICES FOR INDUSTRIAL PRODUCTS |
| I.S. EN 50491-4-1:2012 | GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 4-1: GENERAL FUNCTIONAL SAFETY REQUIREMENTS FOR PRODUCTS INTENDED TO BE INTEGRATED IN BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) |
| DIN EN 16214-1:2012-11 | SUSTAINABILITY CRITERIA FOR THE PRODUCTION OF BIOFUELS AND BIOLIQUIDS FOR ENERGY APPLICATIONS - PRINCIPLES, CRITERIA, INDICATORS AND VERIFIERS - PART 1: TERMINOLOGY |
| I.S. EN 1474-3:2008 | INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 3: OFFSHORE TRANSFER SYSTEMS |
| I.S. CLC/TS 61111:2006 | MATTING OF INSULATING MATERIAL FOR ELECTRICAL PURPOSES |
| I.S. EN 9223-104:2018 | PROGRAMME MANAGEMENT - CONFIGURATION MANAGEMENT - PART 104: CONFIGURATION CONTROL |
| S.R. CEN TR 15941:2010 | SUSTAINABILITY OF CONSTRUCTION WORKS - ENVIRONMENTAL PRODUCT DECLARATIONS - METHODOLOGY FOR SELECTION AND USE OF GENERIC DATA |
| EN 13060:2014 | Small steam sterilizers |
| CEI EN 50657 : 1ED 2018 | RAILWAYS APPLICATIONS - ROLLING STOCK APPLICATIONS - SOFTWARE ON BOARD ROLLING STOCK |
| I.S. EN 16372:2014 | AESTHETIC SURGERY SERVICES |
| PREN 287-1 : DRAFT 2010 | QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 1: STEELS |
| CEI EN 60966-3 : 2010 | RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 3: SECTIONAL SPECIFICATION FOR SEMI-FLEXIBLE COAXIAL CABLE ASSEMBLIES |
| BS EN 9104-001:2013 | Aerospace series. Quality management systems Requirements for Aviation, Space, and Defence Quality Management System Certification Programs |
| EN 14726:2005 | Aluminium and aluminium alloys - Chemical analysis - Guideline for spark optical emission spectrometric analysis |
| I.S. EN 15224:2016 | QUALITY MANAGEMENT SYSTEMS - EN ISO 9001:2015 FOR HEALTHCARE |
| I.S. EN 60384-1:2016 | FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION |
| UNI EN 15001-2 : 2009 | GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 2: DETAILED FUNCTIONAL REQUIREMENTS FOR COMMISSIONING, OPERATION AND MAINTENANCE |
| I.S. EN 45510-4-5:2002 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 4-5: BOILER AUXILIARIES - COAL HANDLING AND BULK STORAGE PLANT |
| I.S. EN 14428:2015 | SHOWER ENCLOSURES - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| I.S. EN 9223-105:2018 | PROGRAMME MANAGEMENT - CONFIGURATION MANAGEMENT - PART 105: GLOSSARY |
| S.R. CEN/TS 15472:2016 | Postal services - Method for measurement of parcel transit time for cross-border parcels within the European Union and EFTA using Tracking and Tracing |
| S.R. CWA 15992:2009 | HARMONIZATION OF DATA INTERCHANGE IN TOURISM |
| BS EN 16114:2011 | Management consultancy services |
| I.S. CEN TS 13244-7:2003 | PLASTICS PIPING SYSTEMS FOR BURIED AND ABOVE-GROUND PRESSURE SYSTEMS FOR WATER FOR GENERAL PURPOSES, DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| I.S. EN 16622:2015 | SILICA-CALCIUM FUME FOR CONCRETE - DEFINITIONS, REQUIREMENTS AND CONFORMITY CRITERIA |
| PREN 14359 : DRAFT 2014 | GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS |
| PREN 197-2 : DRAFT 2012 | CEMENT - PART 2: CONFORMITY EVALUATION |
| BS EN 9120:2010 | Quality management systems. Requirements for aviation, space and defence distributors |
| UNI EN 16271 : 2013 | VALUE MANAGEMENT - FUNCTIONAL EXPRESSION OF THE NEED AND FUNCTIONAL PERFORMANCE SPECIFICATION - REQUIREMENTS FOR EXPRESSING AND VALIDATING THE NEED TO BE SATISFIED WITHIN THE PROCESS OF PURCHASING OR OBTAINING A PRODUCT |
| UNE-EN 13282-3:2015 | Hydraulic road binders - Part 3: Conformity evaluation |
| UNE-EN 14428:2016 | Shower enclosures - Functional requirements and test methods |
| UNI EN 1474-2 : 2009 | INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 2: DESIGN AND TESTING OF TRANSFER HOSES |
| EN 9223-101:2018 | Programme Management - Configuration Management - Part 101: Configuration identification |
| ISO/TS 15874-7:2003 | Plastics piping systems for hot and cold water installations Polypropylene (PP) Part 7: Guidance for the assessment of conformity |
| EN 1090-2:2008+A1:2011 | Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures |
| EN 17007:2017 | Maintenance process and associated indicators |
| UNE-EN 12952-5:2012 | Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler |
| I.S. EN 60393-1:2009 | POTENTIOMETERS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION |
| EN 16844:2017 | Aesthetic medicine services - Non-surgical medical treatments |
| ISO/TS 15876-7:2003 | Plastics piping systems for hot and cold water installations Polybutylene (PB) Part 7: Guidance for the assessment of conformity |
| EN 1090-3:2008 | Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures |
| CEN ISO/TS 15875-7:2003 | Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 7: Guidance for the assessment of conformity (ISO/TS 15875-7:2003) |
| UNE-EN 14359:2017 | Gas-loaded accumulators for fluid power applications |
| BS EN 1822-5:2009 | High efficiency air filters (EPA, HEPA and ULPA) Determining the efficiency of filter elements |
| UNI EN 1822-5 : 2010 | HIGH EFFICIENCY AIR FILTERS (EPA, HEPA AND ULPA) - PART 5: DETERMINING THE EFFICIENCY OF FILTER ELEMENTS |
| DIN EN 13263-1:2009-07 | SILICA FUME FOR CONCRETE - PART 1: DEFINITIONS, REQUIREMENTS AND CONFORMITY CRITERIA |
| DIN EN 12878:2014-07 | PIGMENTS FOR THE COLOURING OF BUILDING MATERIALS BASED ON CEMENT AND/OR LIME - SPECIFICATIONS AND METHODS OF TEST |
| DIN EN 12507:2005-12 | Transportation services - Guidance notes on the application of EN ISO 9001:2000 to the road transportation, storage, distribution and railway goods industries |
| DIN EN 12186:2014-12 | GAS INFRASTRUCTURE - GAS PRESSURE REGULATING STATIONS FOR TRANSMISSION AND DISTRIBUTION - FUNCTIONAL REQUIREMENTS |
| DIN EN 681-1:2016-07 (Draft) | Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber; German and English version prEN 681-1:2016 |
| DIN EN 13060:2015-03 | SMALL STEAM STERILIZERS |
| DIN EN 287-1:2011-11 | QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 1: STEELS |
| DIN EN 12259-1:2006-03 | Fixed firefighting systems - Components for sprinkler and water spray systems - Part 1: Sprinklers |
| DIN EN 285:2016-05 | Sterilization - Steam sterilizers - Large sterilizers |
| DIN EN 486:2009-11 | Aluminium and aluminium alloys - Extrusion ingots - Specifications |
| DIN EN 14359:2011-04 | GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS |
| DIN EN 14508:2016-06 | POSTAL SERVICES - QUALITY OF SERVICE - MEASUREMENT OF THE TRANSIT TIME OF END-TO-END SERVICES FOR SINGLE PIECE NON-PRIORITY MAIL AND SECOND CLASS MAIL |
| BS EN 13549:2001 | Cleaning services. Basic requirements and recommendations for quality measuring systems |
| BS EN 14726:2005 | Aluminium and aluminium alloys. Chemical analysis. Guideline for spark optical emission spectrometric analysis |
| BS EN 13889 : 2003 | FORGED STEEL SHACKLES FOR GENERAL LIFTING PURPOSES - DEE SHACKLES AND BOW SHACKLES - GRADE 6 - SAFETY |
| BS EN 13312-1:2001 | Biotechnology. Performance criteria for piping and instrumentation General performance criteria |
| BS EN ISO 21351:2005 | Space systems. Functional and technical specifications |
| BS EN 13263-2 : 2005 | SILICA FUME FOR CONCRETE - PART 2: CONFORMITY EVALUATION |
| BS EN 197-2:2014 | Cement Conformity evaluation |
| UNE-EN 12842:2013 | Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods |
| BS EN 14817:2006 | Railway applications. Suspension components. Air-spring control elements |
| DIN EN 1337-4:2004-08 | Structural bearings - Part 4: Roller bearings |
| I.S. EN 14080:2013 | TIMBER STRUCTURES - GLUED LAMINATED TIMBER AND GLUED SOLID TIMBER - REQUIREMENTS |
| UNI EN 13262 : 2011 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - WHEELS - PRODUCT REQUIREMENTS |
| UNI EN 13260 : 2011 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - WHEELSETS - PRODUCT REQUIREMENTS |
| UNI EN 13261 : 2011 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - AXLES - PRODUCT REQUIREMENTS |
| UNE-EN 287-1:2011 | Qualification test of welders - Fusion welding - Part 1: Steels |
| EN 13261:2009+A1:2010 | Railway applications - Wheelsets and bogies - Axles - Product requirements |
| EN 60895:2003 | Live working - Conductive clothing for use at nominal voltage up to 800 kV a.c. and ± 600 kV d.c. |
| I.S. EN 13262:2004 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - WHEELS - PRODUCT REQUIREMENTS |
| EN 13262:2004+A2:2011 | Railway applications - Wheelsets and bogies - Wheels - Product requirements |
| EN 1474-2:2008 | Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 2: Design and testing of transfer hoses |
| EN 13260:2009+A1:2010 | Railway applications - Wheelsets and bogies - Wheelsets - Product requirements |
| I.S. EN 13260:2009 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - WHEELSETS - PRODUCT REQUIREMENTS |
| EN 62366-1:2015/AC:2015 | MEDICAL DEVICES - PART 1: APPLICATION OF USABILITY ENGINEERING TO MEDICAL DEVICES (IEC 62366-1:2015) |
| EN 1474-1:2008 | Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 1: Design and testing of transfer arms |
| EN 15161:2006 | Water conditioning equipment inside buildings - Installation, operation, maintenance and repair |
| EN 16311:2013 | Engineering services - Terminology to describe engineering services for industrial products |
| EN 502:2013 | Roofing products from metal sheet - Specification for fully supported roofing products of stainless steel sheet |
| EN ISO 16091:2002 | Space systems - Integrated logistic support (ISO 16091:2002) |
| UNI EN 487 : 2009 | ALUMINIUM AND ALUMINIUM ALLOYS - ROLLING INGOTS - SPECIFICATIONS |
| UNI EN 12952-5 : 2011 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 5: WORKMANSHIP AND CONSTRUCTION OF PRESSURE PARTS OF THE BOILER |
| UNI EN 12159 : 2013 | BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES |
| UNI EN 12186 : 2014 | GAS INFRASTRUCTURE - GAS PRESSURE REGULATING STATIONS FOR TRANSMISSION AND DISTRIBUTION - FUNCTIONAL REQUIREMENTS |
| UNI EN 15167-2 : 2006 | GROUND GRANULATED BLAST FURNACE SLAG FOR USE IN CONCRETE, MORTAR AND GROUT - PART 2: CONFORMITY EVALUATION |
| UNI EN 505 : 2013 | ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STEEL SHEET |
| UNI EN 13263-1 : 2009 | SILICA FUME FOR CONCRETE - PART 1: DEFINITIONS, REQUIREMENTS AND CONFORMITY CRITERIA |
| UNI EN 12899-4 : 2008 | FIXED, VERTICAL ROAD TRAFFIC SIGNS - PART 4: FACTORY PRODUCTION CONTROL |
| UNI EN 599-1 : 2014 | DURABILITY OF WOOD AND WOOD-BASED PRODUCTS - EFFICACY OF PREVENTIVE WOOD PRESERVATIVES AS DETERMINED BY BIOLOGICAL TESTS - PART 1: SPECIFICATION ACCORDING TO USE CLASS |
| UNI EN 13889 : 2009 | FORGED STEEL SHACKLES FOR GENERAL LIFTING PURPOSES - DEE SHACKLES AND BOW SHACKLES - GRADE 6: SAFETY |
| UNI EN 14679 : 2005 | EXECUTION OF SPECIAL GEOTECHNICAL WORKS - DEEP MIXING |
| UNI EN 13802 : 2014 | RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - HYDRAULIC DAMPERS |
| UNI EN 12842 : 2012 | DUCTILE IRON FITTINGS FOR PVC-U OR PE PIPING SYSTEMS - REQUIREMENTS AND TEST METHODS |
| UNI EN 14080 : 2013 | TIMBER STRUCTURES - GLUED LAMINATED TIMBER AND GLUED SOLID TIMBER - REQUIREMENTS |
| UNI EN 13263-2 : 2009 | SILICA FUME FOR CONCRETE - PART 2: CONFORMITY EVALUATION |
| UNI EN 15069 : 2009 | SAFETY GAS CONNECTION VALVES FOR METAL HOSE ASSEMBLIES USED FOR THE CONNECTION OF DOMESTIC APPLIANCES USING GASEOUS FUEL |
| UNI EN 15001-1 : 2009 | GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING |
| UNI EN 14588 : 2010 | SOLID BIOFUELS - TERMINOLOGY, DEFINITIONS AND DESCRIPTIONS |
| UNI EN 14180 : 2014 | STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING |
| UNI EN 1422 : 2014 | STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS |
| UNI EN 287-1 : 2012 | QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 1: STEELS |
| UNI EN 12952-6 : 2011 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 6: INSPECTION DURING CONSTRUCTION; DOCUMENTATION AND MARKING OF PRESSURE PARTS OF THE BOILER |
| UNI EN 15619 : 2014 | RUBBER OR PLASTIC COATED FABRICS - SAFETY OF TEMPORARY STRUCTURES (TENTS) - SPECIFICATION FOR COATED FABRICS INTENDED FOR TENTS AND RELATED STRUCTURES |
| EN 45510-2-9:2008 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-9: ELECTRICAL EQUIPMENT - CABLING SYSTEMS |
| UNI EN 12899-5 : 2008 | FIXED, VERTICAL ROAD TRAFFIC SIGNS - PART 5: INITIAL TYPE TESTING |
| UNI EN 14420-1 : 2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 1: REQUIREMENTS, TYPES OF FIXING AND CONNECTION, DESIGNATION AND TESTING |
| UNI EN 598 : 2009 | DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR SEWERAGE APPLICATIONS - REQUIREMENTS AND TEST METHODS |
| UNI EN 486 : 2009 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUSION INGOTS - SPECIFICATIONS |
| CEI EN 61249-4-19 : 2014 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-19: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD (FOR THE MANUFACTURE OF MULTILAYER BOARDS) - HICH PERFORMANCE NON-HALOGENATED EPOXIDE WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST) FOR LEAD-FREE ASSEMBLY |
| UNI CEN/TS 15718 : 2011 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - PRODUCT REQUIREMENTS FOR CAST WHEELS |
| 15/30322454 DC : 0 | BS EN 9223-103 - PROGRAMME MANAGEMENT - CONFIGURATION MANAGEMENT - PART 103: CONFIGURATION VERIFICATIONS, REVIEWS AND AUDITS |
| PD CEN/TR 15628:2007 | Maintenance. Qualification of maintenance personnel |
| DIN EN ISO 25424:2011-09 | STERILIZATION OF MEDICAL DEVICES - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| DIN EN 15628:2014-10 | MAINTENANCE - QUALIFICATION OF MAINTENANCE PERSONNEL |
| 12/30255894 DC : 0 | BS EN ISO 13940 - HEALTH INFORMATICS - SYSTEM OF CONCEPTS TO SUPPORT CONTINUITY OF CARE |
| DIN EN 16323:2014-07 | GLOSSARY OF WASTEWATER ENGINEERING TERMS |
| 11/30249114 DC : 0 | BS EN 15497 - STRUCTURAL FINGER JOINTED SOLID TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS |
| BS EN 60966-2-1:2009 | Radio frequency and coaxial cable assemblies Sectional specification for flexible coaxial cable assemblies |
| DD CEN/TS 15675:2007 | Air quality. Measurement of stationary source emissions. Application of EN ISO/IEC 17025:2005 to periodic measurements |
| BS EN 61249-2-22:2005 | Materials for printed boards and other interconnecting structures Reinforced base materials, clad and unclad - Modified non-halogenated epoxide woven E-glass laminated sheets of defined flammability (vertical burning test), copper-clad |
| 16/30341010 DC : 0 | BS EN 50239 - RAILWAY APPLICATIONS - RADIO REMOTE CONTROL SYSTEM OF TRACTION VEHICLE FOR SHUNTING TRAFFIC |
| PREN 13802 : DRAFT 2012 | RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - HYDRAULIC DAMPERS |
| PREN 12878 : DRAFT 2012 | PIGMENTS FOR THE COLOURING OF BUILDING MATERIALS BASED ON CEMENT AND/OR LIME - SPECIFICATIONS AND METHODS OF TEST |
| DIN EN 1474-1:2009-03 | INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS |
| CEI EN 61249-2-21 : 2005 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-21: REINFORCED BASE MATERIALS, CLAD AND UNCLAD NON-HALOGENATED EPOXIDE WOVEN E-GLASS REINFORCED LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
| BS EN ISO 25424:2011 | Sterilization of medical devices. Low temperature steam and formaldehyde. Requirements for development, validation and routine control of a sterilization process for medical devices |
| PREN 17180 : DRAFT 2017 | STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE VAPORIZED HYDROGEN PEROXIDE STERILIZERS - REQUIREMENTS AND TESTING |
| I.S. EN 13670:2009 | EXECUTION OF CONCRETE STRUCTURES |
| BS EN 61249-4-18:2013 | Materials for printed boards and other interconnecting structures Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards). High performance epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly |
| FD TR 13480-7 : 2003 FD | METALLIC INDUSTRIAL PIPING - PART 7: GUIDANCE ON THE USE OF CONFORMITY ASSESSMENT PROCEDURES |
| 00/124250 DC : DRAFT NOV 2000 | BS EN 14041 - RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - HEALTH, SAFETY AND ENERGY-SAVING REQUIREMENTS |
| UNI CEN/TR 14245 : 2015 | CEMENT - GUIDELINES FOR THE APPLICATION OF EN 197-2 CONFORMITY EVALUATION |
| DIN EN 13445 Beiblatt 1:2002-08 | Unfired pressure vessels - Part 7: Guidance on the use of the conformity assessment procedures |
| UNI EN 15359 : 2011 | SOLID RECOVERED FUELS - SPECIFICATIONS AND CLASSES |
| BS EN 61508-2:2010 | Functional safety of electrical/electronic/ programmable electronic safety-related systems Requirements for electrical/electronic/ programmable electronic safety-related systems |
| CEI UNI EN 45510-4-5 : 2006 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 4-5: BOILER AUXILIARIES - COAL HANDLING AND BULK STORAGE PLANT |
| PREN 1330-1 : DRAFT 2014 | NON-DESTRUCTIVE TESTING - TERMINOLOGY - PART 1: LIST OF GENERAL TERMS |
| PREN 15001-2 : DRAFT 2017 | GAS SUPPLY SYSTEMS - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 2: DETAILED FUNCTIONAL REQUIREMENTS FOR COMMISSIONING, OPERATION AND MAINTENANCE |
| 11/30239914 DC : 0 | BS EN 16250-1 - LEVELS OF PERFORMANCE AND ACCEPTANCE FOR STREET CLEANING AND MUNICIPAL WASTE MANAGEMENT SERVICES - PART 1: GENERAL REQUIREMENTS |
| DD CEN/TS 14758-2:2007 | Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene with mineral modifier(s) (PP-MD) Guidance for the assessment of conformity |
| 11/30242719 DC : 0 | BS EN 16271 - VALUE MANAGEMENT - FUNCTIONAL EXPRESSION OF THE NEED AND FUNCTIONAL PERFORMANCE SPECIFICATION - REQUIREMENTS FOR EXPRESSING AND VALIDATING THE NEED TO BE SATISFIED WITHIN THE PROCESS OF PURCHASING OR OBTAINING A PRODUCT |
| BS EN 61249-2-36:2009 | Materials for printed boards and other interconnecting structures Reinforced base materials, clad and unclad. Epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly |
| UNE-EN 16622:2016 | Silica-calcium fume for concrete - Definitions, requirements and conformity criteria |
| DIN EN 16431 E : 2014 | RAILWAY APPLICATIONS - TRACK - HOLLOW SLEEPERS AND BEARERS |
| BS EN 61508-7:2010 | Functional safety of electrical/electronic/ programmable electronic safety related systems Overview of techniques and measures |
| BS EN 60903:2003 | Live working. Gloves of insulating material |
| 96/205776 DC : DRAFT MAY 1996 | BS CECC 200021 - PROCESS ASSESSMENT SCHEDULE FOR MASS LAMINATION PANELS |
| BS 6068-5.42(2006) : 2006 | WATER QUALITY - GUIDANCE ON ASSURING THE QUALITY OF BIOLOGICAL AND ECOLOGICAL ASSESSMENTS IN THE AQUATIC ENVIRONMENT |
| 15/30322460 DC : 0 | BS EN 9223-105 - PROGRAMME MANAGEMENT - CONFIGURATION MANAGEMENT - PART 105: GLOSSARY |
| PREN 14508 : DRAFT 2015 | POSTAL SERVICES - QUALITY OF SERVICE - MEASUREMENT OF THE TRANSIT TIME OF END-TO-END SERVICES FOR SINGLE PIECE NON-PRIORITY MAIL AND SECOND CLASS MAIL |
| I.S. EN 12967-2:2007 | HEALTH INFORMATICS - SERVICE ARCHITECTURE - PART 2: INFORMATION VIEWPOINT |
| CR 14269:2001 | Chemicals used for treatment of water intended for human consumption - Guidelines for the purchase |
| UNI EN 15221-3 : 2011 | FACILITY MANAGEMENT - PART 3: GUIDANCE ON QUALITY IN FACILITY MANAGEMENT |
| I.S. EN 1325-2:2004 | VALUE MANAGEMENT, VALUE ANALYSIS, FUNCTIONAL ANALYSIS VOCABULARY - PART 2: VALUE MANAGEMENT |
| BS EN 61249-2-7:2002 | Materials for interconnection structures. Sectional specification set for reinforced base materials, clad and unclad Epoxide woven E-glass laminated sheet of defined flammability (vertical burning test), copper-clad |
| BS EN 16730:2016 | Railway applications. Track. Concrete sleepers and bearers with under sleeper pads |
| I.S. EN ISO 14620-1:2002 | SPACE SYSTEMS - SAFETY REQUIREMENTS - PART 1: SYSTEM SAFETY |
| I.S. EN 12967-1:2007 | HEALTH INFORMATICS - SERVICE ARCHITECTURE - PART 1: ENTERPRISE VIEWPOINT |
| UNE-EN 15359:2012 | Solid recovered fuels - Specifications and classes |
| CEI EN 61249-2-1 : 2005 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-1: REINFORCED BASE MATERIALS, CLAD AND UNCLAD PHENOLIC CELLULOSE PAPER REINFORCED LAMINATED SHEETS,ECONOMIC GRADE, COPPER CLAD |
| BS EN 15234-1:2011 | Solid biofuels. Fuel quality assurance General requirements |
| 08/30181434 DC : DRAFT DEC 2008 | BS EN 12159 AMD1 - BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES |
| UNE-EN 16848:2017 | Bio-based products - Requirements for Business to Business communication of characteristics using a Data Sheet |
| PD CEN/TR 15941:2010 | Sustainability of construction works. Environmental product declarations. Methodology for selection and use of generic data |
| UNE-EN 16265:2016 | Pyrotechnic articles - Other pyrotechnic articles - Ignition devices |
| PD CEN/TS 12200-2:2017 | Plastics rainwater piping systems for above ground external use. Unplasticized poly(vinyl chloride) (PVC-U) Guidance for the assessment of conformity |
| PD CEN/TR 15840:2009 | Evaluation of conformity of fly ash for concrete. Guidelines for the application of EN 450-2 |
| DIN EN 16730:2016-09 | RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS WITH UNDER SLEEPER PADS |
| CEI EN 60966-2-1 : 2010 | RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 2-1: SECTIONAL SPECIFICATION FOR FLEXIBLE COAXIAL CABLE ASSEMBLIES |
| DIN EN 16887 E : 2017 | LEATHER - ENVIRONMENTAL FOOTPRINT - PRODUCT CATEGORY RULES (PCR) - CARBON FOOTPRINTS |
| UNI EN 15357 : 2011 | SOLID RECOVERED FUELS - TERMINOLOGY, DEFINITIONS AND DESCRIPTIONS |
| UNI CEN/TS 1555-7 : 2013 | PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| BS EN 1474-1:2008 | Installation and equipment for liquefied natural gas. Design and testing of marine transfer systems Design and testing of transfer arms |
| 15/30320416 DC : 0 | BS EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| DD CEN/TS 12666-2:2005 | Plastics piping systems for non-pressure underground drainage and sewerage. Polyethylene (PE) Guidance for the assessment of conformity |
| DD CEN/TS 1555-7:2003 | Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Guidance for the assessment of conformity |
| 97/541589 DC : DRAFT MAY 1997 | PREN 12845 - FIXED FIREFIGHTING SYSTEMS - AUTOMATIC SPRINKLER SYSTEMS - DESIGN AND INSTALLATION |
| BS EN 15628:2014 | Maintenance. Qualification of maintenance personnel |
| 02/104824 DC : DRAFT JULY 2002 | BS EN 14516 - BATHS FOR DOMESTIC PURPOSES |
| UNE-EN 15331:2012 | Criteria for design, management and control of maintenance services for buildings |
| BS EN 15331:2011 | Criteria for design, management and control of maintenance services for buildings |
| BS EN 61249-2-11:2003 | Materials for printed boards and other interconnecting structures Reinforced base materials, clad and unclad - Polyimide, brominated epoxide modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
| CEI UNI EN 45510-4-4 : 2006 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 4-4: BOILER AUXILIARIES - FUEL PREPARATION EQUIPMENT |
| 02/106354 DC : DRAFT OCT 2002 | EN 12966-2 - VERTICAL ROAD TRAFFIC SIGNS - PART 2: VARIABLE MESSAGE SIGNS - INITIAL TYPE TESTING |
| S.R. CEN TR 15592:2007 | HEALTH SERVICES - QUALITY MANAGEMENT SYSTEMS - GUIDE FOR THE USE OF EN ISO 9004:2000 IN HEALTH SERVICES FOR PERFORMANCE IMPROVEMENT |
| 14/30274238 DC : 0 | BS EN 14359 - GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS |
| CEN/TR 15809:2008 | Characterization of sludges - Hygienic aspects - Treatments |
| 12/30263896 DC : 0 | BS EN 16457 - CHARACTERIZATION OF WASTE - FRAMEWORK FOR THE PREPARATION AND APPLICATION OF A TESTING PROGRAMME - OBJECTIVES, PLANNING AND REPORT |
| 08/30176353 DC : DRAFT MAR 2008 | BS ISO 12967-3 - HEALTH INFORMATICS - SERVICE ARCHITECTURE - PART 3: COMPUTATIONAL VIEWPOINT |
| BS EN 1325:2014 | Value Management. Vocabulary. Terms and definitions |
| BS EN 16214-1:2012 | Sustainability criteria for the production of biofuels and bioliquids for energy applications. Principles, criteria, indicators and verifiers Terminology |
| BS EN 16622:2015 | Silica-calcium fume for concrete. Definitions, requirements and conformity criteria |
| BS EN 61249-4-2:2005 | Materials for printed boards and other interconnecting structures Sectional specification set for prepreg materials, unclad. Multifunctional expoxide woven E-glass prepeg of defined flammability |
| DD CEN/TS 15358:2006 | Solid recovered fuels. Quality management systems. Particular requirements for their application to the production of solid recovered fuels |
| 14/30289280 DC : 0 | BS EN 12764 - SANITARY APPLIANCES - SPECIFICATION FOR WHIRLPOOL BATHS |
| 03/101361 DC : DRAFT OCT 2003 | EN 13428 - PACKAGING - REQUIREMENTS SPECIFIC TO MANUFACTURING AND COMPOSITION - PREVENTION BY SOURCE REDUCTION |
| BS EN 82045-1:2001 | Document management Principles and methods |
| BS EN 15359:2011 | Solid recovered fuels. Specifications and classes |
| DD CEN ISO/TS 15874-7:2003 | Plastics piping systems for hot and cold water installations. Polypropylene (PP) Guidance for the assessment of conformity |
| DD CEN ISO/TS 15875-7:2003 | Plastics piping systems for hot and cold water installations. Crosslinked polyethylene (PE-X) Guidance for the assessment of conformity |
| I.S. EN 62366-1:2015/AC:2015 | MEDICAL DEVICES - PART 1: APPLICATION OF USABILITY ENGINEERING TO MEDICAL DEVICES |
| CEI EN 82045-1 : 2002 | DOCUMENT MANAGEMENT - PART 1: PRINCIPLES AND METHODS |
| BS EN 61744:2005 | Calibration of fibre optic chromatic dispersion test sets |
| 02/645215 DC : DRAFT OCT 2002 | EN 50090-2-3:2002 - HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 2-3: SYSTEM OVERVIEW - GENERAL FUNCTIONAL SAFETY REQUIREMENTS FOR PRODUCTS INTENDED TO BE INTEGRATED IN HBES |
| I.S. EN 50128:2011 | RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - SOFTWARE FOR RAILWAY CONTROL AND PROTECTION SYSTEMS |
| S.R. CEN TR 15809:2008 | CHARACTERIZATION OF SLUDGES - HYGIENIC ASPECTS - TREATMENTS |
| UNI EN 1325 : 2014 | VALUE MANAGEMENT - VOCABULARY - TERMS AND DEFINITIONS |
| UNI CEN/CR 13445-7 : 2010 | UNFIRED PRESSURE VESSELS - PART 7: GUIDANCE ON THE USE OF THE CONFORMITY PROCEDURES |
| DIN EN 16887:2015-07 (Draft) | LEATHER - ENVIRONMENTAL FOOTPRINT - PRODUCT CATEGORY RULES (PCR) - CARBON FOOTPRINTS |
| PREN 9223-103 : DRAFT 2016 | PROGRAMME MANAGEMENT - CONFIGURATION MANAGEMENT - PART 103: CONFIGURATION VERIFICATIONS, REVIEWS AND AUDITS |
| BS EN 60300-3-1:2004 | Dependability management. Application guide Analysis techniques for dependability. Guide on methodology |
| PREN 9223-105 : DRAFT 2016 | PROGRAMME MANAGEMENT - CONFIGURATION MANAGEMENT - PART 105: GLOSSARY |
| UNI CEN/TS 13598-3 : 2012 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 3: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| PREN 9110 : 200P4 | QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR AVIATION MAINTENANCE ORGANIZATIONS |
| UNI EN 1474-3 : 2009 | INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 3: OFFSHORE TRANSFER SYSTEMS |
| PREN 9100 : 200P4 | QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR AVIATION, SPACE AND DEFENCE ORGANIZATIONS |
| 16/30334735 DC : 0 | BS EN 15224 - HEALTH CARE SERVICES - QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS BASED ON EN ISO 9001:2015 |
| EN 14516:2015 | Baths for domestic purposes |
| PREN 9162 : 200P1 | AEROSPACE SERIES - AEROSPACE OPERATOR SELF-VERIFICATION PROGRAMS |
| DIN EN 16457:2014-07 | CHARACTERIZATION OF WASTE - FRAMEWORK FOR THE PREPARATION AND APPLICATION OF A TESTING PROGRAMME - OBJECTIVES, PLANNING AND REPORT |
| UNE-EN 16271:2013 | Value management - Functional expression of the need and functional performance specification - Requirements for expressing and validating the need to be satisfied within the process of purchasing or obtaining a product |
| S.R. CEN/TR 15569:2009 | SOLID BIOFUELS - A GUIDE FOR A QUALITY ASSURANCE SYSTEM |
| UNE-EN 50128:2012 | Railway applications - Communication, signalling and processing systems - Software for railway control and protection systems |
| CEI EN 61249-2-26 : 2005 | MATERIAUX POUR CIRCUITS IMPRIMES ET AUTRES STRUCTURES D'INTERCONNEXION - PARTIE 2-26: MATERIAUX DE BASE RENFORCES, PLAQUES ET NON PLAQUES - FEUILLES STRATIFIEES RENFORCEES EN TISSU DE VERRE DE TYPE EPOXYDE TISSE/NON TISSE, NON-HALOGENE, D'INFLAMMABILITE DEFINIE (ESSAI DE COMBUSTION VERTICALE), PLAQUEES CUIVRE |
| BS EN 61508-4:2010 | Functional safety of electrical/electronic/ programmable electronic safety related systems Definitions and abbreviations |
| S.R. CEN/TR 14245:2014 | CEMENT - GUIDELINES FOR THE APPLICATION OF EN 197-2 CONFORMITY EVALUATION |
| I.S. EN 16311:2013 | ENGINEERING SERVICES - TERMINOLOGY TO DESCRIBE ENGINEERING SERVICES FOR INDUSTRIAL PRODUCTS |
| CEI EN 61249-2-42 : 2011 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-42: REINFORCED BASE MATERIALS CLAD AND UNCLAD - BROMINATED EPOXIDE NON-WOVEN / WOVEN E-GLASS REINFORCED LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY |
| UNI CEN/TR 13480-7 : 2012 | METALLIC INDUSTRIAL PIPING - PART 7: GUIDANCE ON THE USE OF CONFORMITY ASSESSMENT PROCEDURES |
| UNE-EN 9104-001:2013 | Aerospace series - Quality management systems - Part 001: Requirements for Aviation, Space, and Defence Quality Management System Certification Programs |
| I.S. EN 60903:2003 | LIVE WORKING - GLOVES OF INSULATING MATERIAL |
| S.R. CEN TR 15628:2007 | MAINTENANCE - QUALIFICATION OF MAINTENANCE PERSONNEL |
| I.S. EN 9223-101:2018 | PROGRAMME MANAGEMENT - CONFIGURATION MANAGEMENT - PART 101: CONFIGURATION IDENTIFICATION |
| I.S. EN 15331:2011 | CRITERIA FOR DESIGN, MANAGEMENT AND CONTROL OF MAINTENANCE SERVICES FOR BUILDINGS |
| PREN 15224 : DRAFT 2016 | HEALTH CARE SERVICES - QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS BASED ON EN ISO 9001:2015 |
| UNI EN 16310 : 2013 | ENGINEERING SERVICES - TERMINOLOGY TO DESCRIBE ENGINEERING SERVICES FOR BUILDINGS, INFRASTRUCTURE AND INDUSTRIAL FACILITIES |
| I.S. EN 16214-1:2012 | SUSTAINABILITY CRITERIA FOR THE PRODUCTION OF BIOFUELS AND BIOLIQUIDS FOR ENERGY APPLICATIONS - PRINCIPLES, CRITERIA, INDICATORS AND VERIFIERS - PART 1: TERMINOLOGY |
| I.S. EN 9223-103:2018 | PROGRAMME MANAGEMENT - CONFIGURATION MANAGEMENT - PART 103: CONFIGURATION VERIFICATIONS, REVIEWS AND AUDITS |
| S.R. CEN TR 13480-7:2002 | METALLIC INDUSTRIAL PIPING - PART 7: GUIDANCE ON THE USE OF CONFORMITY ASSESSMENT PROCEDURES |
| I.S. EN 9136:2018 | AEROSPACE SERIES - ROOT CAUSE ANALYSIS AND PROBLEM SOLVING (9S METHODOLOGY) |
| I.S. EN 14516:2015 | BATHS FOR DOMESTIC PURPOSES |
| I.S. EN 9300-200:2018 | AEROSPACE SERIES - LOTAR - LONG TERM ARCHIVING AND RETRIEVAL OF DIGITAL TECHNICAL PRODUCT DOCUMENTATION SUCH AS 3D, CAD AND PDM DATA - PART 200: COMMON CONCEPTS FOR LONG TERM ARCHIVING AND RETRIEVAL OF PRODUCT STRUCTURE INFORMATION |
| EN 9120:2010 | Quality Management Systems - Requirements for Aviation, Space and Defence Distributors |
| I.S. EN 61249-4-19:2013 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-19: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD (FOR THE MANUFACTURE OF MULTILAYER BOARDS) - HIGH PERFORMANCE NON-HALOGENATED EPOXIDE WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST) FOR LEAD-FREE ASSEMBLY |
| I.S. EN 61249-2-7:2002 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-7: REINFORCED BASE MATERIALS CLAD AND UNCLAD - EPOXIDE WOVEN E-GLASS LAMINATED SHEET OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
| EN 9136:2018 | Aerospace series - Root cause analysis and problem solving (9S Methodology) |
| 17/30334194 DC : 0 | BS EN 17095 - RAILWAY APPLICATIONS - ROLLING STOCK MAINTENANCE - MAINTENANCE RECORDS |
| 17/30348949 DC : 0 | BS EN 1090-3 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| I.S. EN 61355:1999 | CLASSIFICATION AND DESIGNATION OF DOCUMENTS FOR PLANTS, SYSTEMS AND EQUIPMENT |
| CEN/TR 15840:2009 | Evaluation of conformity of fly ash for concrete - Guidelines for the application of EN 450-2 |
| CLC/TS 61112:2006 | Blankets of insulating material for electrical purposes |
| PREN 14516 : DRAFT 2015 | BATHS FOR DOMESTIC PURPOSES |
| CEN/TR 15569:2009 | Solid biofuels - A guide for a quality assurance system |
| BS EN 12764 : 2015 | SANITARY APPLIANCES - SPECIFICATION FOR WHIRLPOOL BATHS |
| PREN 17095 : DRAFT 2017 | RAILWAY APPLICATIONS - ROLLING STOCK MAINTENANCE - MAINTENANCE RECORDS |
| I.S. EN 9120:2010 | QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR AVIATION, SPACE AND DEFENCE DISTRIBUTORS |
| I.S. CR 13695-2:2002 | PACKAGING - REQUIREMENTS FOR MEASURING AND VERIFYING THE FOUR HEAVY METALS AND OTHER DANGEROUS SUBSTANCES PRESENT IN PACKAGING, AND THEIR RELEASE INTO THE ENVIRONMENT - PART 2: REQUIREMENTS FOR MEASURING AND VERIFYING DANGEROUS SUBSTANCES PRESENT IN PACKAGING, AND THEIR RELEASE INTO THE ENVIRONMENT |
| S.R. CWA 15832:2008 | HUMANITARIAN MINE ACTION - FOLLOW-ON PROCESSES AFTER THE USE OF DEMINING MACHINES |
| DIN EN ISO 17511:2003-11 | In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values assigned to calibrators and control materials (ISO 17511:2003) |
| I.S. CEN TS 12201-7:2003 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - POLYETHYLENE (PE) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| I.S. EN ISO/TS 15875-7:2004 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CROSSLINKED POLYETHYLENE (PE-X) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| UNE-EN 1822-5:2010 | High efficiency air filters (EPA, HEPA and ULPA) - Part 5: Determining the efficiency of filter elements |
| DIN EN 12798:2007-08 | Transport quality management system - Road, rail and inland navigation transport - Quality management system requirements to supplement EN ISO 9001 for the transport of dangerous goods with regard to safety |
| DIN EN 14180:2014-09 | STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING |
| DIN EN 13802:2014-03 | Railway applications - Suspension components - Hydraulic dampers |
| DIN EN 13428:2004-10 | Packaging - Requirements specific to manufacturing and composition - Prevention by source reduction; German version EN 13428:2004 |
| DIN EN 14080:2013-09 | TIMBER STRUCTURES - GLUED LAMINATED TIMBER AND GLUED SOLID TIMBER - REQUIREMENTS |
| DIN EN 502:2013-06 | ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STAINLESS STEEL SHEET |
| UNE-EN 13230-1:2016 | Railway applications - Track - Concrete sleepers and bearers - Part 1: General requirements |
| 04/30124829 DC : 0 | EN 15070 - STRIP WOUND FLEXIBLE SAFETY METALLIC HOSE ASSEMBLIES FOR THE CONNECTION OF DOMESTIC APPLIANCES USING GASEOUS FUELS |
| BS EN 599-1 : 2009 | DURABILITY OF WOOD AND WOOD-BASED PRODUCTS - EFFICACY OF PREVENTIVE WOOD PRESERVATIVES AS DETERMINED BY BIOLOGICAL TESTS - PART 1: SPECIFICATION ACCORDING TO USE CLASS |
| BS EN 13263-1 : 2005 | SILICA FUME FOR CONCRETE - PART 1: DEFINITIONS, REQUIREMENTS AND CONFORMITY CRITERIA |
| BS EN 13428:2004 | Packaging. Requirements specific to manufacturing and composition. Prevention by source reduction |
| BS EN 13612:2002 | Performance evaluation of in vitro diagnostic medical devices |
| BS EN 12258-2:2004 | Aluminium and aluminium alloys. Terms and definitions Chemical analysis |
| UNE-EN 15001-1:2010 | Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
| BS EN 14359:2017 | Gas-loaded accumulators for fluid power applications |
| ISO 14620-1:2002 | Space systems Safety requirements Part 1: System safety |
| BS EN 502:2013 | Roofing products from metal sheet. Specification for fully supported roofing products of stainless steel sheet |
| BS EN 12186:2014 | Gas infrastructure. Gas pressure regulating stations for transmission and distribution. Functional requirements |
| UNI EN 197-2 : 2014 | CEMENT - PART 2: CONFORMITY EVALUATION |
| BS EN 1330-1:2014 | Non destructive testing. Terminology List of general terms |
| BS EN 12878:2014 | Pigments for the colouring of building materials based on cement and/or lime. Specifications and methods of test |
| BS EN 13262 : 2004 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - WHEELS - PRODUCT REQUIREMENTS |
| ISO/IEC 80079-34:2011 | Explosive atmospheres Part 34: Application of quality systems for equipment manufacture |
| UNE-EN 1776:2017 | Gas infrastructure - Gas measuring systems - Functional requirements |
| UNE-EN 486:2010 | Aluminium and aluminium alloys - Extrusion ingots - Specifications |
| BS EN 12967-1:2007 | Health informatics. Service architecture Enterprise viewpoint |
| BS EN 12967-2:2007 | Health informatics. Service architecture Information viewpoint |
| BS EN 12952-5:2011 | Water-tube boilers and auxiliary installations Workmanship and construction of pressure parts of the boiler |
| BS EN 13486:2002 | Temperature recorders and thermometers for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream. Periodic verification |
| BS EN 1776:2015 | Gas infrastructure. Gas measuring systems. Functional requirements |
| BS EN ISO 17511:2003 | In vitro diagnostic medical devices. Measurement of quantities in biological samples. Metrological traceability of values assigned to calibrators and control materials |
| BS EN 1337-6:2004 | Structural bearings Rocker bearings |
| UNE-EN ISO 13485:2016 | Medical devices - Quality management systems - Requirements for regulatory purposes (ISO 13485:2016) |
| UNE-EN 487:2010 | Aluminium and aluminium alloys - Rolling ingots - Specifications |
| UNE-EN 13802:2014 | Railway applications - Suspension components - Hydraulic dampers |
| EN ISO/IEC 80079-34:2011 | Explosive atmospheres - Part 34: Application of quality systems for equipment manufacture (ISO/IEC 80079-34:2011) |
| I.S. EN 197-2:2014 | CEMENT - PART 2: CONFORMITY EVALUATION |
| BS EN 14420-1:2013 | Hose fittings with clamp units Requirements, types of fixing and connection, designation and testing |
| CEN/TR 14245:2014 | Cement - Guidelines for the application of EN 197-2 Conformity Evaluation |
| BS EN 9200:2004 | Programme management. Guidelines for project management specification |
| BS EN 15161:2006 | Water conditioning equipment inside buildings. Installation, operation, maintenance and repair |
| UNE-EN 15079:2015 | Copper and copper alloys - Analysis by spark optical emission spectrometry (S-OES) |
| BS EN 13060 : 2014 | SMALL STEAM STERILIZERS |
| UNE-EN 599-1:2010 | Durability of wood and wood-based products - Efficacy of preventive wood preservatives as determined by biological tests - Part 1: Specification according to use class |
| BS EN 14679:2005 | Execution of special geotechnical works. Deep mixing |
| BS EN 285:2015 | Sterilization. Steam sterilizers. Large sterilizers |
| DIN EN 15069:2010-07 | Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel |
| BS EN 10266:2003 | Steel tubes, fittings and structural hollow sections. Symbols and definitions of terms for use in product standards |
| ISO 21351:2005 | Space systems Functional and technical specifications |
| ISO 16426:2002 | Fasteners — Quality assurance system |
| BS EN 12952-6:2011 | Water-tube boilers and auxiliary installations Inspection during construction; documentation and marking of pressure parts of the boiler |
| UNE-EN 14516:2017 | Baths for domestic purposes |
| BS EN 15049:2007 | Railway applications. Suspension components. Torsion bar, steel |
| BS EN 14180:2014 | Sterilizers for medical purposes. Low temperature steam and formaldehyde sterilizers. Requirements and testing |
| BS EN 14065:2016 | Textiles. Laundry processed textiles. Biocontamination control system |
| UNE-EN 13262:2005 | Railway applications - Wheelsets and bogies - Wheels - Product requirement. |
| UNE-EN 13352:2012 | Specification for the performance of automatic tank contents gauges |
| BS EN 14080:2013 | Timber structures. Glued laminated timber and glued solid timber. Requirements |
| BS EN 12966-2:2005 | Road vertical signs. Variable message traffic signs Initial type testing |
| UNE-EN 13670:2013 | Execution of concrete structures |
| UNE-EN 502:2013 | Roofing products from metal sheet - Specification for fully supported roofing products of stainless steel sheet |
| BS EN 13975:2003 | Sampling procedures used for acceptance testing of in vitro diagnostic medical devices. Statistical aspects |
| BS EN 12966-3:2005 | Road vertical signs. Variable message traffic signs Factory production control |
| BS EN 13298:2003 | Railway applications. Suspension components. Helical suspension springs, steel |
| BS EN 12507:2005 | Transportation services. Guidance notes on the application of EN ISO 9001:2000 to the road transportation, storage, distribution and railway goods industries |
| BS EN ISO 13485:2016 | Medical devices. Quality management systems. Requirements for regulatory purposes |
| EN 45510-2-9 : 2008 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-9: ELECTRICAL EQUIPMENT - CABLING SYSTEMS |
| EN 61751:1998 | Laser modules used for telecommunication - Reliability assessment |
| EN 14817:2006 | Railway applications - Suspension components - Air spring control elements |
| EN 9277:2015 | Aerospace series - Programme Management - Guide for the management of Systems Engineering |
| EN 486:2009 | Aluminium and aluminium alloys - Extrusion ingots - Specifications |
| EN 15069:2008 | Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel |
| EN 16751:2016 | Bio-based products - Sustainability criteria |
| EN 16372:2014 | Aesthetic surgery services |
| EN 14359:2017 | Gas-loaded accumulators for fluid power applications |
| EN 16271:2012 | Value management - Functional expression of the need and functional performance specification - Requirements for expressing and validating the need to be satisfied within the process of purchasing or obtaining a product |
| EN ISO 10012:2003 | Measurement management systems - Requirements for measurement processes and measuring equipment (ISO 10012:2003) |
| EN 450-2:2005 | Fly ash for concrete - Part 2: Conformity evaluation |
| EN 16887:2017 | Leather - Environmental footprint - Product Category Rules (PCR) - Carbon footprints |
| EN 16310:2013 | Engineering services - Terminology to describe engineering services for buildings, infrastructure and industrial facilities |
| EN 16114:2011 | Management consultancy services |
| EN 45510-4-4:2002 | Guide for procurement of power station equipment - Part 4-4: Boiler auxiliaries - Fuel preparation equipment |
| EN 16263-1:2015 | Pyrotechnic articles - Other pyrotechnic articles - Part 1: Terminology |
| EN 15424:2007 | Sterilization of medical devices - Low temperature steam and formaldehyde - Requirements for development, validation and routine control of a sterilization process for medical devices |
| EN 14420-1:2013 | Hose fittings with clamp units - Part 1: Requirements, types of fixing and connection, designation and testing |
| EN 14080:2013 | Timber structures - Glued laminated timber and glued solid timber - Requirements |
| EN 15221-5:2011 | Facility Management - Part 5: Guidance on Facility Management processes |
| EN 15001-1:2009 | Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
| EN 16622:2015 | Silica-calcium fume for concrete - Definitions, requirements and conformity criteria |
| EN 15038:2006 | Translation services - Service requirements |
| EN 16214-1:2012 | Sustainability criteria for the production of biofuels and bioliquids for energy applications - Principles, criteria, indicators and verifiers - Part 1: Terminology |
| EN 15049:2007 | Railway applications - Suspension components - Torsion bar, steel |
| EN 15001-2:2008 | Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 2: Detailed functional requirements for commissioning, operation and maintenance |
| EN 287-1:2011 | Qualification test of welders - Fusion welding - Part 1: Steels |
| EN 13980:2002 | Potentially explosive atmospheres - Application of quality systems |
| EN 15079:2015 | Copper and copper alloys - Analysis by spark optical emission spectrometry (S-OES) |
| EN 1776:2015 | Gas infrastructure - Gas measuring systems - Functional requirements |
| EN 13889:2003+A1:2008 | Forged steel shackles for general lifting purposes - Dee shackles and bow shackles - Grade 6 - Safety |
| EN 12159:2012 | Builders hoists for persons and materials with vertically guided cages |
| EN 14996:2006 | Water quality - Guidance on assuring the quality of biological and ecological assessments in the aquatic environment |
| EN 16679:2014 | Packaging - Tamper verification features for medicinal product packaging |
| EN 9104:2006 | Aerospace series - Quality management systems - Requirements for Aerospace Quality Management System Certification/Registrations Programs |
| EN ISO 25424:2011 | Sterilization of medical devices - Low temperature steam and formaldehyde - Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 25424:2009) |
| EN 15221-3:2011 | Facility Management - Part 3: Guidance on quality in Facility Management |
| EN 15619:2014 | Rubber or plastic coated fabrics - Safety of temporary structures (tents) - Specification for coated fabrics intended for tents and related structures |
| EN 15167-2:2006 | Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 2: Conformity evaluation |
| EN 16431:2014 | Railway applications - Track - Hollow sleepers and bearers |
| EN 15259:2007 | Air quality - Measurement of stationary source emissions - Requirements for measurement sections and sites and for the measurement objective, plan and report |
| EN 505:2013 | Roofing products from metal sheet - Specification for fully supported roofing products of steel sheet |
| EN 14065:2016 | Textiles - Laundry processed textiles - Biocontamination control system |
| EN ISO/TS 15877-7 : 2003 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| EN 12878:2014 | Pigments for the colouring of building materials based on cement and/or lime - Specifications and methods of test |
| EN 16457:2014 | Characterization of waste - Framework for the preparation and application of a testing programme - Objectives, planning and report |
| EN ISO 14620-1:2002 | Space systems - Safety requirements - Part 1: System safety (ISO 14620-1:2002) |
| EN 16730:2016 | Railway applications - Track - Concrete sleepers and bearers with under sleeper pads |
| EN 1422:2014 | Sterilizers for medical purposes - Ethylene oxide sterilizers - Requirements and test methods |
| EN 1330-1:2014 | Non destructive testing - Terminology - Part 1: List of general terms |
| EN 599-1:2009+A1:2013 | Durability of wood and wood-based products - Efficacy of preventive wood preservatives as determined by biological tests - Part 1: Specification according to use class |
| EN 12842:2012 | Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods |
| EN 13913:2003 | Railway applications - Rubber suspension components - Elastomer-based mechanical parts |
| EN 598:2007+A1:2009 | Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Requirements and test methods |
| EN 306:1997 | Heat exchangers - Methods of measuring the parameters necessary for establishing the performance |
| EN 16265:2015 | Pyrotechnic articles - Other pyrotechnic articles - Ignition devices |
| EN 13597:2003 | Railway applications - Rubber suspension components - Rubber diaphragms for pneumatic suspension springs |
| EN 1474-3:2008 | Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 3: Offshore transfer systems |
| EN 13670:2009 | Execution of concrete structures |
| EN ISO 21351:2005 | Space systems - Functional and technical specifications (ISO 21351:2005) |
| EN 14180:2014 | Sterilizers for medical purposes - Low temperature steam and formaldehyde sterilizers - Requirements and testing |
| EN 14508:2016 | Postal services - Quality of service - Measurement of the transit time of end-to-end services for single piece non-priority mail and second class mail |
| EN 487:2009 | Aluminium and aluminium alloys - Rolling ingots - Specifications |
| EN 13975:2003 | Sampling procedures used for acceptance testing of in vitro diagnostic medical devices - Statistical aspects |
| EN 13802:2013 | Railway applications - Suspension components - Hydraulic dampers |
| EN 15593:2008 | Packaging - Management of hygiene in the production of packaging for foodstuffs - Requirements |
| EN ISO 16426:2002 | Fasteners - Quality assurance system (ISO 16426:2002) |
| EN 9200:2004 | Aerospace series - Programme management - Guidelines for project management specification |
| EN 45510-4-5:2002 | Guide for procurement of power station equipment - Part 4-5: Boiler auxiliaries - Coal handling and bulk storage plant |
| EN 16323:2014 | Glossary of wastewater engineering terms |
| EN 1614:2006 | Health informatics - Representation of dedicated kinds of property in laboratory medicine |
| EN 15221-4:2011 | Facility Management - Part 4: Taxonomy, Classification and Structures in Facility Management |
| PREN 50657 : DRAFT 2016 | RAILWAY APPLICATIONS - ROLLING STOCK APPLICATIONS - SOFTWARE ON BOARD OF ROLLING STOCK, EXCLUDING RAILWAY CONTROL AND PROTECTION APPLICATIONS |
| UNE-EN 15221-5:2012 | Facility Management - Part 5: Guidance on Facility Management processes |
| UNE-EN 16730:2017 | Railway applications - Track - Concrete sleepers and bearers with under sleeper pads |
| UNE-EN 16263-1:2016 | Pyrotechnics articles - Other pyrotechnic articles - Part 1: Terminology |
| PREN 14420-1 : DRAFT 2010 | HOSE FITTINGS WITH CLAMP UNITS - PART 1: REQUIREMENTS, SURVEY, DESIGNATION AND TESTING |
| BS EN 13282-3:2013 | Hydraulic road binders Conformity evaluation |
| DIN EN 15221-4:2011-12 | Facility Management - Part 4: Taxonomy, Classification and Structures in Facility Management |
| S.R. CEN/TR 16862:2015 | PLASTICS WELDING SUPERVISOR - TASK, RESPONSIBILITIES, KNOWLEDGE, SKILLS AND COMPETENCE |
| I.S. EN 14588:2010 | SOLID BIOFUELS - TERMINOLOGY, DEFINITIONS AND DESCRIPTIONS |
| I.S. EN 61249-2-37:2009 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-37: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - MODIFIED NON-HALOGENATED EPOXIDE WOVEN E-GLASS LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY |
| CEI EN 50397-2 : 2011 | COVERED CONDUCTORS FOR OVERHEAD LINES AND THE RELATED ACCESSORIES FOR RATED VOLTAGES ABOVE 1 KV AC AND NOT EXCEEDING 36 KV AC - PART 2: ACCESSORIES FOR COVERED CONDUCTORS - TESTS AND ACCEPTANCE CRITERIA |
| PREN 50128 : DRAFT 2009 | RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - SOFTWARE FOR RAILWAY CONTROL AND PROTECTION SYSTEMS |
| 10/30235392 DC : 0 | BS EN 287-1 - QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 1: STEELS |
| 09/30180884 DC : 0 | BS EN 50128 - RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - SOFTWARE FOR RAILWAY CONTROL AND PROTECTION SYSTEMS |
| I.S. EN 15001-1:2009 | GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING |
| 11/30179635 DC : 0 | BS EN 13850 - POSTAL SERVICES - QUALITY OF SERVICES - MEASUREMENT OF THE TRANSIT TIME OF END-TO-END SERVICES FOR SINGLE PIECE PRIORITY MAIL AND FIRST CLASS MAIL |
| PD CEN/TR 14245:2014 | Cement. Guidelines for the application of EN 197-2 Conformity Evaluation |
| BS EN 15221-4:2011 | Facility management Taxonomy, classification and structures in facility management |
| I.S. CEN TS 15358:2006 | SOLID RECOVERED FUELS - QUALITY MANAGEMENT SYSTEMS - PARTICULAR REQUIREMENTS FOR THEIR APPLICATION TO THE PRODUCTION OF SOLID RECOVERED FUELS |
| BS EN 16372:2014 | Aesthetic surgery services |
| CECC 200025 : 1998 | PROCESS ASSESSMENT SCHEDULE: PRINTED BOARD ASSEMBLY FACILITIES |
| 17/30364380 DC : 0 | BS EN 50064 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - GAS-FILLED WROUGHT ALUMINIUM AND ALUMINIUM ALLOY ENCLOSURES |
| 10/30209040 DC : 0 | BS EN 13940-2 - HEALTH INFORMATICS - SYSTEM OF CONCEPTS TO SUPPORT CONTINUITY OF CARE - PART 2: HEALTH CARE PROCESS AND WORKFLOW |
| DIN EN 15628 E : 2014 | MAINTENANCE - QUALIFICATION OF MAINTENANCE PERSONNEL |
| BS EN 62282-4-102:2017 | Fuel cell technologies Fuel cell power systems for industrial electric trucks. Performance test methods |
| CEI EN 61249-2-38 : 2009 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-38: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - NON-HALOGENATED EPOXIDE WOVEN E-GLASS LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY |
| CEI EN 61249-4-1 : 2010 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-1: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD (FOR THE MANUFACTURE OF MULTILAYER BOARDS) - EPOXIDE WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY |
| UNE-EN 1325:2014 | Value Management - Vocabulary - Terms and definitions |
| I.S. CEN TS 14632:2006 | PLASTICS PIPING SYSTEMS FOR DRAINAGE, SEWERAGE AND WATER SUPPLY, PRESSURE AND NON-PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON POLYESTER RESIN (UP) - GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| 11/30239900 DC : DRAFT MAR 2011 | BS EN 15012 - PLASTICS PIPING SYSTEMS - NON PRESSURE SOIL AND WASTE DISCHARGE PIPING COMPONENTS WITHIN THE BUILDING STRUCTURE - REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR PIPES AND FITTINGS |
| CEI EN 61249-2-6 : 2005 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-6: REINFORCED BASE MATERIALS, CLAD AND UNCLAD BROMINATED EPOXIDE NON-WOVEN/WOVEN E-GLASS REINFORCED LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
| I.S. EN 50657:2017 | RAILWAYS APPLICATIONS - ROLLING STOCK APPLICATIONS - SOFTWARE ON BOARD ROLLING STOCK |
| I.S. EN 15038:2006 | TRANSLATION SERVICES - SERVICE REQUIREMENTS |
| BS EN 61249-4-14:2009 | Materials for printed boards and other interconnecting structures Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) Epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly |
| 03/303958 DC : DRAFT APR 2003 | EN 14679 - EXECUTION OF SPECIAL GEOTECHNICAL WORKS - DEEP MIXING |
| BS EN 60870-5-6:2009 | Marine energy. Wave, tidal and other water current converters Scale testing of tidal stream energy systems |
| BS EN 60393-1:2009 | Potentiometers for use in electronic equipment Generic specification |
| 13/30277457 DC : 0 | BS EN 1776 - GAS INFRASTRUCTURE - GAS MEASURING SYSTEMS - FUNCTIONAL REQUIREMENTS |
| 12/30256067 DC | BS EN 12899-4 AMD1. Fixed, vertical road traffic signs. Part 4. Factory production control |
| I.S. EN 61249-4-11:2005 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-11: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD - NON-HALOGENATED EPOXIDE, WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY |
| DD CEN/TS 13244-7:2003 | Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage. Polyethylene (PE) Guidance for the assessment of conformity |
| I.S. EN 61249-2-4:2002 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-4: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - POLYESTER NON-WOVEN/WOVEN FIBREGLASS LAMINATED SHEET OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
| 15/30319759 DC : 0 | BS EN 13269 - MAINTENANCE - GUIDELINE ON PREPARATION OF MAINTENANCE CONTRACTS |
| I.S. EN ISO/TS 15874-7:2004 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS POLYPROPYLENE (PP) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| BS EN 9277:2015 | Aerospace series. Programme Management. Guide for the management of Systems Engineering |
| PREN 50126-5 : DRAFT 2012 | RAILWAY APPLICATIONS - THE SPECIFICATION AND DEMONSTRATION OF RELIABILITY, AVAILABILITY, MAINTAINABILITY AND SAFETY (RAMS) - PART 5: FUNCTIONAL SAFETY - SOFTWARE |
| DIN EN 15619:2014-07 | RUBBER OR PLASTIC COATED FABRICS - SAFETY OF TEMPORARY STRUCTURES (TENTS) - SPECIFICATION FOR COATED FABRICS INTENDED FOR TENTS AND RELATED STRUCTURES |
| DIN EN 1474-2:2009-02 | Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 2: Design and testing of transfer hoses |
| CEI EN 62282-4-102 : 1ED 2017 | FUEL CELL TECHNOLOGIES - PART 4-102: FUEL CELL POWER SYSTEMS FOR INDUSTRIAL ELECTRIC TRUCKS - PERFORMANCE TEST METHODS |
| S.R. CEN TR 15840:2009 | EVALUATION OF CONFORMITY OF FLY ASH FOR CONCRETE - GUIDELINES FOR THE APPLICATION OF EN 450-2 |
| 16/30332108 DC : 0 | BS EN 50657 - RAILWAY APPLICATIONS - ROLLING STOCK APPLICATIONS - SOFTWARE ON BOARD OF ROLLING STOCK, EXCLUDING RAILWAY CONTROL AND PROTECTION APPLICATIONS |
| BS EN 45510-4-5:2002 | Guide for the procurement of power station equipment. Boiler auxiliaries Coal handling and bulk storage plant |
| BS EN 61209:1999 | Maritime navigation and radiocommunication equipment and systems. Integrated bridge systems (IBS). Operational and performance requirements, methods of testing and required test results |
| 15/30179639 DC : 0 | BS EN 14508 - POSTAL SERVICES - QUALITY OF SERVICE - MEASUREMENT OF THE TRANSIT TIME OF END-TO-END SERVICES FOR SINGLE PIECE NON-PRIORITY MAIL AND SECOND CLASS MAIL |
| 03/311760 DC : DRAFT JULY 2003 | ISO 10432 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SUBSURFACE SAFETY VALVE EQUIPMENT |
| BS EN 50491-4-1:2012 | General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) General functional safety requirements for products intended to be integrated in Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) |
| DD CEN/TS 15511:2008 | Postal services. Quality of service. Information available on postal services |
| UNE-EN 62282-3-201:2013 | Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems |
| 16/30299842 DC : 0 | BS EN 50518 - MONITORING AND ALARM RECEIVING CENTRE |
| S.R. CEN Guide 14:2010 | COMMON POLICY GUIDANCE FOR ADDRESSING STANDARDIZATION ON QUALIFICATION OF PROFESSIONS AND PERSONNEL |
| I.S. EN 60966-4:2003 | RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 4: SECTIONAL SPECIFICATION FOR SEMI-RIGID COAXIAL CABLE ASSEMBLIES |
| I.S. EN 61249-2-42:2010 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-42: REINFORCED BASE MATERIALS CLAD AND UNCLAD - BROMINATED EPOXIDE NON-WOVEN/WOVEN E-GLASS REINFORCED LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY |
| DIN EN 15224:2016-04 (Draft) | QUALITY MANAGEMENT SYSTEMS - EN ISO 9001:2015 FOR HEALTHCARE |
| DIN EN 16457 E : 2014 | CHARACTERIZATION OF WASTE - FRAMEWORK FOR THE PREPARATION AND APPLICATION OF A TESTING PROGRAMME - OBJECTIVES, PLANNING AND REPORT |
| 05/30138598 DC : 0 | EN 752 - DRAIN AND SEWER SYSTEMS FOR OUTSIDE BUILDINGS |
| UNI EN 16114 : 2011 | MANAGEMENT CONSULTANCY SERVICES |
| NF EN 15358 : 2011 | SOLID RECOVERED FUELS - QUALITY MANAGEMENT SYSTEMS - PARTICULAR REQUIREMENTS FOR THEIR APPLICATION TO THE PRODUCTION OF SOLID RECOVERED FUELS |
| BS EN 15001-1:2009 | Gas infrastructure. Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations Detailed functional requirements for design, materials, construction, inspection and testing |
| DIN EN 16271:2013-03 | Value management - Functional expression of the need and functional performance specification - Requirements for expressing and validating the need to be satisfied within the process of purchasing or obtaining a product |
| DIN EN 16431:2014-10 | RAILWAY APPLICATIONS - TRACK - HOLLOW SLEEPERS AND BEARERS |
| UNE-EN 15221-4:2012 | Facility Management - Part 4: Taxonomy, Classification and Structures in Facility Management |
| BS EN 61160:2005 | Design review |
| I.S. EN 16730:2016 | RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS WITH UNDER SLEEPER PADS |
| I.S. EN 61249-2-26:2005 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-26: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - NON-HALOGENATED EPOXIDE NON-WOVEN/WOVEN E-GLASS REINFORCED LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
| BS EN 62366-1:2015 | Medical devices Application of usability engineering to medical devices |
| 09/30202002 DC : 0 | BS EN 15358 - SOLID RECOVERED FUELS - QUALITY MANAGEMENT SYSTEMS - PARTICULAR REQUIREMENTS FOR THEIR APPLICATION TO THE PRODUCTION OF SOLID RECOVERED FUELS |
| PREN 50064 : DRAFT 2017 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - GAS-FILLED WROUGHT ALUMINIUM AND ALUMINIUM ALLOY ENCLOSURES |
| 14/30297213 DC : 0 | BS EN 1473 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS |
| 12/30217447 DC : 0 | BS ISO 13611 - INTERPRETING - GUIDELINES FOR COMMUNITY INTERPRETING |
| BS EN 16457:2014 | Characterization of waste. Framework for the preparation and application of a testing programme. Objectives, planning and report |
| UNI EN 15221-5 : 2011 | FACILITY MANAGEMENT - PART 5: GUIDANCE ON FACILITY MANAGEMENT PROCESSES |
| I.S. EN 61481:2001 | LIVE WORKING - PORTABLE PHASE COMPARATORS FOR VOLTAGES OF 1 KV TO 36 KV A.C. |
| NF EN 9120 : 2011 | QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR AVIATION, SPACE AND DEFENSE DISTRIBUTORS |
| CEI UNI EN 12966-2/Ab:2020-02 | ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS - PART 2: INITIAL TYPE TESTING |
| PREN 50239 : DRAFT 2016 | RAILWAY APPLICATIONS - RADIO REMOTE CONTROL SYSTEM OF TRACTION VEHICLE FOR SHUNTING TRAFFIC |
| BS EN 61249-4-11:2005 | Materials for printed boards and other interconnecting structures Sectional specification set for prepreg materials, unclad. Non-halogenated epoxide woven E-glass prepeg of defined flammability |
| 98/263682 DC : DRAFT SEP 1998 | PREN 50309 - OPTICAL FIBRE AMPLIFIER RELIABILITY STANDARD |
| UNI EN 13670 : 2010 | EXECUTION OF CONCRETE STRUCTURES |
| UNE-EN 15224:2017 | Quality management systems - EN ISO 9001:2015 for healthcare |
| BS EN 60895:2003 | Live working. Conductive clothing for use at a nominal voltage up to 800 kV a.c. and ± 600 kV d.c. |
| UNE-EN 62402:2011 | Obsolescence management - Application guide |
| I.S. EN 61249-2-6:2005/AC:2005 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-6: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - BROMINATED EPOXIDE NON-WOVEN/WOVEN E-GLASS REINFORCED LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
| S.R. CEN/TS 15718:2011 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - PRODUCT REQUIREMENTS FOR CAST WHEELS |
| DIN EN 16310:2013-05 | ENGINEERING SERVICES - TERMINOLOGY TO DESCRIBE ENGINEERING SERVICES FOR BUILDINGS, INFRASTRUCTURE AND INDUSTRIAL FACILITIES |
| PREN 9120 : 200P4 | QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR AVIATION, SPACE AND DEFENCE DISTRIBUTORS |
| I.S. EN 16263-1:2015 | PYROTECHNIC ARTICLES - OTHER PYROTECHNIC ARTICLES - PART 1: TERMINOLOGY |
| PREN 13269 : DRAFT 2015 | MAINTENANCE - GUIDELINE ON PREPARATION OF MAINTENANCE CONTRACTS |
| S.R. CEN/TR 16469:2013 | HYDROMETRY - MEASUREMENT OF THE RAINFALL INTENSITY (LIQUID PRECIPITATION): REQUIREMENTS, CALIBRATION METHODS AND FIELD MEASUREMENTS |
| PREN 12764 : DRAFT 2014 | SANITARY APPLIANCES - SPECIFICATION FOR WHIRLPOOL BATHS |
| I.S. EN 50397-2:2009 | COVERED CONDUCTORS FOR OVERHEAD LINES AND THE RELATED ACCESSORIES FOR RATED VOLTAGES ABOVE 1 KV AC AND NOT EXCEEDING 36 KV AC - PART 2: ACCESSORIES FOR COVERED CONDUCTORS - TESTS AND ACCEPTANCE CRITERIA |
| CEN/TS 15511:2008 | Postal services - Quality of service - Information available on postal services |
| I.S. EN 1090-2:2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| S.R. CEN/TS 1555-7:2013 | PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| S.R. CWA 15899:2008 | STANDARDIZATION OF AN INNOVATION CAPABILITY RATING FOR SMES |
| I.S. EN 15221-3:2011 | FACILITY MANAGEMENT - PART 3: GUIDANCE ON QUALITY IN FACILITY MANAGEMENT |
| I.S. EN 61249-2-1:2005 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-1: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - PHENOLIC CELLULOSE PAPER REINFORCED LAMINATED SHEETS, ECONOMIC GRADE, COPPER CLAD |
| CEI EN 50491-4-1 : 2014 | GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 4-1: GENERAL FUNCTIONAL SAFETY REQUIREMENTS FOR PRODUCTS INTENDED TO BE INTEGRATED IN BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) |
| CEI EN 61249-2-36 : 2010 | MATERIAUX POUR CIRCUITS IMPRIMES ET AUTRES STRUCTURES D'INTERCONNEXION - PARTIE 2-36: MATERIAUX DE BASE RENFORCES, PLAQUES ET NON PLAQUES - FEUILLES STRATIFIEES EN TISSU DE VERRE DE TYPE E EPOXYDE, PLAQUEES CUIVRE, D'INFLAMMABILITE DEFINIE (ESSAI DE COMBUSTION VERTICALE) POUR LES ASSEMBLAGES SANS PLOMB |
| I.S. EN 61249-4-5:2005 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-5: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD - POLYIMIDE, MODIFIED OR UNMODIFIED, WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY |
| CEI EN 61249-4-18 : 2014 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-18: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD (FOR THE MANUFACTURE OF MULTILAYER BOARDS) - HIGH PERFORMANCE EPOXIDE WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST) FOR LEAD-FREE ASSEMBLY |
| CEI UNI CEN/TR 16469 : 2015 | HYDROMETRY - MEASUREMENT OF THE RAINFALL INTENSITY (LIQUID PRECIPITATION): REQUIREMENTS, CALIBRATION METHODS AND FIELD MEASUREMENTS |
| CEI EN 61249-4-5 : 2006 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-5: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD - POLYIMIDE, MODIFIED OR UNMODIFIED, WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY |
| I.S. EN 16310:2013 | ENGINEERING SERVICES - TERMINOLOGY TO DESCRIBE ENGINEERING SERVICES FOR BUILDINGS, INFRASTRUCTURE AND INDUSTRIAL FACILITIES |
| UNE-EN 15234-1:2011 | Solid biofuels - Fuel quality assurance - Part 1: General requirements |
| I.S. EN 45510-4-4:2002 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 4-4: BOILER AUXILIARIES - FUEL PREPARATION EQUIPMENT |
| BS EN 62304 : 2006 | MEDICAL DEVICE SOFTWARE - SOFTWARE LIFE-CYCLE PROCESSES |
| I.S. EN 62282-4-102:2017 | FUEL CELL TECHNOLOGIES - PART 4-102: FUEL CELL POWER SYSTEMS FOR INDUSTRIAL ELECTRIC TRUCKS - PERFORMANCE TEST METHODS |
| RG.AERO 000 103 : 0 | PROGRAMME MANAGEMENT - A GUIDE FOR THE APPLICATION OF CONFIGURATION VERIFICATIONS, REVIEWS AND AUDITS |
| DIN EN 15331:2011-11 | Criteria for design, management and control of maintenance services for buildings |
| UNE-EN 1090-3:2011 | Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures |
| I.S. EN 9104-001:2013 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - PART 001: REQUIREMENTS FOR AVIATION, SPACE, AND DEFENCE QUALITY MANAGEMENT SYSTEM CERTIFICATION PROGRAMS |
| UNI EN 9104-001 : 2013 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - PART 001: REQUIREMENTS FOR AVIATION, SPACE, AND DEFENCE QUALITY MANAGEMENT SYSTEM CERTIFICATION PROGRAMS |
| UNI CEI EN ISO/IEC 80079-34 : 2012 | EXPLOSIVE ATMOSPHERES - PART 34: APPLICATION OF QUALITY SYSTEMS FOR EQUIPMENT MANUFACTURE |
| BS EN 14428 : 2015 | SHOWER ENCLOSURES - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| UNE-EN 50491-4-1:2013 | General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 4-1: General functional safety requirements for products intended to be integrated in Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) |
| EN 9223-104:2018 | Programme Management - Configuration Management - Part 104: Configuration Control |
| EN 9223-103:2018 | Programme Management - Configuration Management - Part 103: Configuration Verifications, Reviews and Audits |
| CEI EN 61249-2-8 : 2004 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-8: REINFORCED BASE MATERIALS CLAD AND UNCLAD MODIFIED BROMINATED EPOXIDE WOVEN FIBERGLASS REINFORCED LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
| CLC/TR 50674:2018 | Guidelines for the verification of household appliances under energy labelling and eco design |
| UNE-EN 13060:2015 | Small steam sterilizers |
| UNI EN 16214-1 : 2012 | SUSTAINABILITY CRITERIA FOR THE PRODUCTION OF BIOFUELS AND BIOLIQUIDS FOR ENERGY APPLICATIONS - PRINCIPLES, CRITERIA, INDICATORS AND VERIFIERS - PART 1: TERMINOLOGY |
| UNE-EN 16323:2014 | Glossary of wastewater engineering terms |
| EN 9300-200:2018 | Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 200: Common Concepts for LOng Term Archiving and Retrieval of Product Structure Information |
| UNE-EN 82079-1:2015 | Preparation of instructions for use - Structuring, content and presentation - Part 1: General principles and detailed requirements |
| UNE-EN ISO 25424:2011 | Sterilization of medical devices - Low temperature steam and formaldehyde - Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 25424:2009) |
| BS EN 16844 : 2017 | AESTHETIC MEDICINE SERVICES - NON-SURGICAL MEDICAL TREATMENTS |
| I.S. EN 16114:2011 | MANAGEMENT CONSULTANCY SERVICES |
| DIN EN 16848:2015-04 (Draft) | BIO-BASED PRODUCTS - REQUIREMENTS FOR BUSINESS TO BUSINESS COMMUNICATION OF CHARACTERISTICS USING A DATA SHEET |
| I.S. EN 60300-3-1:2004 | DEPENDABILITY MANAGEMENT - PART 3-1: APPLICATION GUIDE - ANALYSIS TECHNIQUES FOR DEPENDABILITY - GUIDE ON METHODOLOGY |
| I.S. EN 61249-2-18:2002 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-18: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - POLYESTER NON-WOVEN FIBREGLASS REINFORCED LAMINATED SHEET OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
| I.S. EN 61249-4-2:2005 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-2: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD - MULTIFUNCTIONAL EPOXIDE WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY |
| I.S. EN 15234-1:2011 | SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 61249-2-21:2004 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-21: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - NON-HALOGENATED EPOXIDE WOVEN E-GLASS REINFORCED LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
| I.S. EN ISO/TS 15877-7:2004 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| I.S. CEN TS 15331:2006 | CRITERIA FOR DESIGN, MANAGEMENT AND CONTROL OF MAINTENANCE SERVICES FOR BUILDINGS |
| I.S. EN 15357:2011 | SOLID RECOVERED FUELS - TERMINOLOGY, DEFINITIONS AND DESCRIPTIONS |
| I.S. CEN TS 15357:2006 | SOLID RECOVERED FUELS - TERMINOLOGY, DEFINITIONS AND DESCRIPTIONS |
| I.S. EN 61249-2-11:2005 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-11: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - POLYIMIDE, BROMINATED EPOXIDE MODIFIED OR UNMODIFIED, WOVEN E-GLASS REINFORCED LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
| EN 50128:2011/AC:2014 | RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - SOFTWARE FOR RAILWAY CONTROL AND PROTECTION SYSTEMS |
| EN 61987-10:2009/AC:2011 | INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 10: LISTS OF PROPERTIES (LOPS) FOR INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL FOR ELECTRONIC DATA EXCHANGE - FUNDAMENTALS |
| DIN EN 12952-5:2012-01 | Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler |
| DIN EN 13260:2011-01 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - WHEELSETS - PRODUCT REQUIREMENTS |
| DIN EN 13298:2003-11 | RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - HELICAL SUSPENSION SPRINGS, STEEL |
| DIN EN 599-1:2014-03 | DURABILITY OF WOOD AND WOOD-BASED PRODUCTS - EFFICACY OF PREVENTIVE WOOD PRESERVATIVES AS DETERMINED BY BIOLOGICAL TESTS - PART 1: SPECIFICATION ACCORDING TO USE CLASS |
| DIN EN 14065:2016-08 | TEXTILES - LAUNDRY PROCESSED TEXTILES - BIOCONTAMINATION CONTROL SYSTEM |
| UNE-EN 285:2016 | Sterilization - Steam sterilizers - Large sterilizers |
| BS EN 1422:2014 | Sterilizers for medical purposes. Ethylene oxide sterilizers. Requirements and test methods |
| BS EN 13260 : 2009 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - WHEELSETS - PRODUCT REQUIREMENTS |
| ISO 10012:2003 | Measurement management systems — Requirements for measurement processes and measuring equipment |
| UNE-EN 1330-1:2015 | Non destructive testing - Terminology - Part 1: List of general terms |
| BS EN 15167-2:2006 | Ground granulated blast furnace slag for use in concrete, mortar and grout Conformity evaluation |
| BS EN 12967-3:2007 | Health informatics. Service architecture Computational viewpoint |
| BS EN 13352:2012 | Specification for the performance of automatic tank contents gauges |
| BS EN 12259-1:1999 | Fixed firefighting systems. Components for sprinkler and water spray systems Sprinklers |
| BS EN 45510-2-9:2008 | Guide for procurement of power station equipment Electrical equipment. Cabling systems |
| BS EN 12259-4:2000 | Fixed firefighting systems. Components for sprinkler and water spray systems Water motor alarms |
| BS EN 12798:2007 | Transport quality management system. Road rail and inland navigation transport. Quality management system requirements to supplement EN ISO 9001 for the transport of dangerous goods, with regard to safety |
| BS EN ISO 10012:2003 | Measurement management systems. Requirements for measurement processes and measuring equipment |
| ISO 16091:2002 | Space systems Integrated logistic support |
| BS EN 1337-4:2004 | Structural bearings Roller bearings |
| BS EN ISO 14620-1:2002 | Space systems. Safety requirements System safety |
| BS EN 12842:2012 | Ductile iron fittings for PVC-U or PE piping systems. Requirements and test methods |
| BS EN 14588:2010 | Solid biofuels. Terminology, definitions and descriptions |
| BS EN 486:2009 | Aluminium and aluminium alloys. Extrusion ingots. Specifications |
| BS EN 1325-2:2004 | Value management, value analysis, functional analysis vocabulary Value management |
| BS EN 15259:2007 | Air quality. Measurement of stationary source emissions. Requirements for measurement sections and sites and for the measurement objective, plan and report |
| BS EN 12899-5:2007 | Fixed, vertical road traffic signs Initial type testing |
| BS EN 15079:2015 | Copper and copper alloys. Analysis by spark optical emission spectrometry (S-OES) |
| DIN EN 15224:2017-05 | QUALITY MANAGEMENT SYSTEMS - EN ISO 9001:2015 FOR HEALTHCARE |
| CEN/TS 12200-2:2017 | Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity |
| EN 12507:2005 | Transportation services - Guidance notes on the application of EN ISO 9001:2000 to the road transportation, storage, distribution and railway goods industries |
| DIN EN 14817:2006-08 | Railway applications - Suspension components - Air spring control elements |
| CEN/TR 14585-2:2006 | Corrugated metal hose assemblies for pressure applications - Part 2: Guidance on the use of conformity assessment procedures |
| CR 13445-7:2002 | Unfired pressure vessels - Part 7: Guidance on the use of the conformity procedures |
| EN 61249-2-7:2002/corrigendum:2005 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-7: REINFORCED BASE MATERIALS CLAD AND UNCLAD - EPOXIDE WOVEN E-GLASS LAMINATED SHEET OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
| EN 60966-2-1:2009 | Radio frequency and coaxial cable assemblies - Part 2-1: Sectional specification for flexible coaxial cable assemblies |
| CEN/TS 15358:2006 | Solid recovered fuels - Quality management systems - Particular requirements for their application to the production of solid recovered fuels |
| EN 61249-2-4:2002 | Materials for printed boards and other interconnecting structures - Part 2-4: Reinforced base materials, clad and unclad - Polyester non-woven/woven fibreglass laminated sheet of defined flammability (vertical burning test), copper-clad |
| EN 61249-2-21:2003 | Materials for printed boards and other interconnecting structures - Part 2-21: Reinforced base materials, clad and unclad - Non-halogenated epoxide woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
| EN 15359:2011 | Solid recovered fuels - Specifications and classes |
| CEN/TS 15359:2006 | Solid recovered fuels - Specifications and classes |
| EN 12967-1:2007 | Health informatics - Service architecture - Part 1: Enterprise viewpoint |
| EN 1325:2014 | Value Management - Vocabulary - Terms and definitions |
| CEN/TS 15331:2005 | Criteria for design, management and control of maintenance services for buildings |
| EN 61249-2-6:2003/corrigendum:2005 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-6: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - BROMINATED EPOXIDE NON-WOVEN/WOVEN E-GLASS REINFORCED LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
| EN 12952-6:2011 | Water-tube boilers and auxiliary installations - Part 6: Inspection during construction; documentation and marking of pressure parts of the boiler |
| EN 61249-2-22:2005 | Materials for printed boards and other interconnecting structures - Part 2-22: Reinforced base materials, clad and unclad - Modified non-halogenated epoxide woven E-glass laminated sheets of defined flammability (vertical burning test), copper-clad |
| EN 61249-4-18 : 2013 | Materials for printed boards and other interconnecting structures - Part 4-18: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - High performance epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly |
| EN 61249-2-23:2005 | Materials for printed boards and other interconnecting structures - Part 2-23: Reinforced base materials, clad and unclad - Non-halogenated phenolic cellulose paper reinforced laminated sheets, economic grade, copper-clad |
| EN 61249-2-8:2003 | Materials for printed boards and other interconnecting structures - Part 2-8: Reinforced base materials, clad and unclad - Modified brominated epoxide woven fibreglass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
| EN 61744:2005 | Calibration of fibre optic chromatic dispersion test sets |
| EN 61355:1997 | Classification and designation of documents for plants, systems and equipment |
| EN 61508-7:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7: Overview of techniques and measures |
| EN 60300-3-1:2004 | Dependability management - Part 3-1: Application guide - Analysis techniques for dependability - Guide on methodology |
| EN 61249-2-38:2009 | Materials for printed boards and other interconnecting structures - Part 2-38: Reinforced base materials, clad and unclad - Non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly |
| DIN EN 15161:2007-02 | Water conditioning equipment inside buildings - Installation, operation, maintenance and repair |
| CEN/TS 14773:2004 | Postal services - Quality of service - Measurement of loss and substantial delay in priority and first class single piece mail using a survey of test letters |
| EN 60300-3-16:2008 | Dependability management - Part 3-16: Application guide - Guidelines for specification of maintenance support services |
| CEN/TS 13244-7 : 2003 | PLASTICS PIPING SYSTEMS FOR BURIED AND ABOVE-GROUND PRESSURE SYSTEMS FOR WATER FOR GENERAL PURPOSES, DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| DIN EN 1325-2:2004-11 | VALUE MANAGEMENT, VALUE ANALYSIS, FUNCTIONAL ANALYSIS VOCABULARY - PART 2: VALUE MANAGEMENT |
| EN 12435:2006 | Health informatics - Expression of results of measurements in health sciences |
| DIN EN 45510-4-5:2002-11 | Guide for procurement of power station equipment - Part 4-5: Boiler auxiliaries; Coal handling and bulk storage plant |
| DIN EN 14726:2005-12 | ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL ANALYSIS - GUIDELINE FOR SPARK OPTICAL EMISSION SPECTROMETRIC ANALYSIS |
| EN 61249-2-42 : 2010 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-42: REINFORCED BASE MATERIALS CLAD AND UNCLAD - BROMINATED EPOXIDE NON-WOVEN/WOVEN E-GLASS REINFORCED LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY |
| DIN EN 12966-2:2005-07 | ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS - PART 2: INITIAL TYPE TESTING |
| DIN EN 15038:2006-08 | TRANSLATION SERVICES - SERVICE REQUIREMENTS |
| EN 12825:2001 | Raised access floors |
| EN 61249-4-1:2008 | Materials for printed boards and other interconnecting structures - Part 4-1: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Epoxide woven E-glass prepreg of defined flammability |
| EN 61249-2-35:2009 | Materials for printed boards and other interconnecting structures - Part 2-35: Reinforced base materials, clad and unclad - Modified epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly |
| DIN EN 450-2:2005-05 | Fly ash for concrete - Part 2: Conformity evaluation |
| CEN/TS 1555-7:2013 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 7: Guidance for the assessment of conformity |
| EN 61249-2-11:2003/corrigendum:2005 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-11: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - POLYIMIDE, BROMINATED EPOXIDE MODIFIED OR UNMODIFIED, WOVEN E-GLASS REINFORCED LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
| EN 13486:2001 | Temperature recorders and thermometers for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream - Periodic verification |
| EN 50491-4-1:2012 | General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 4-1: General functional safety requirements for products intended to be integrated in Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) |
| DIN EN 14516:2015-12 | BATHS FOR DOMESTIC PURPOSES |
| DIN EN 287-1:2004-05 | QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 1: STEELS |
| EN 61508-4:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations |
| EN 61249-2-36:2009 | Materials for printed boards and other interconnecting structures - Part 2-36: Reinforced base materials, clad and unclad - Epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly |
| EN 61249-4-12:2005 | Materials for printed boards and other interconnecting structures - Part 4-12: Sectional specification set for prepreg materials, unclad - Non-halogenated multifunctional epoxide woven E-glass prepreg of defined flammability |
| DIN EN 10266:2003-12 | STEEL TUBES, FITTINGS AND STRUCTURAL HOLLOW SECTIONS - SYMBOLS AND DEFINITIONS OF TERMS FOR USE IN PRODUCT STANDARDS |
| EN 61249-2-9:2003 | Materials for printed boards and other interconnecting structures - Part 2-9: Reinforced base materials, clad and unclad - Bismaleimide/triazine, modified epoxide or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
| DIN EN 14588:2011-01 | SOLID BIOFUELS - TERMINOLOGY, DEFINITIONS AND DESCRIPTIONS |
| DIN EN 14359:2017-09 | GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS |
| EN 61249-2-5:2003/corrigendum:2005 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-5: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - BROMINATED EPOXIDE CELLULOSE PAPER REINFORCED CORE / WOVEN E-GLASS REINFORCED SURFACES LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
| EN 13282-3:2015 | Hydraulic road binders - Part 3: Conformity evaluation |
| DIN EN 487:2009-11 | Aluminium and aluminium alloys - Rolling ingots - Specifications |
| EN 60903 : 2003 COR 2005 | LIVE WORKING - GLOVES OF INSULATING MATERIAL |
| EN 61249-2-10:2003/corrigendum:2005 | Materials for printed boards and other interconnecting structures - Part 2-10: Reinforced base materials, clad and unclad - Cyanate ester, brominated epoxide, modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
| DIN EN 15001-2:2010-04 | Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 2: Detailed functional requirements for commissioning, operation and maintenance |
| EN 61249-4-17:2009 | Materials for printed boards and other interconnecting structures - Part 4-17: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Non-halogenated epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly |
| EN 82045-1:2001 | Document management - Part 1: Principles and methods |
| EN 61249-2-2:2005 | Materials for printed boards and other interconnecting structures - Part 2-2: Reinforced base materials, clad and unclad - Phenolic cellulose paper reinforced laminated sheets, high electrical grade, copper-clad |
| EN 13298:2003 | Railway applications - Suspension components - Helical suspension springs, steel |
| CEN/TR 16469:2013 | Hydrometry - Measurement of the rainfall intensity (liquid precipitation): requirements, calibration methods and field measurements |
| DIN EN 13913:2003-08 | RAILWAY APPLICATIONS - RUBBER SUSPENSION COMPONENTS - ELASTOMER-BASED MECHANICAL PARTS |
| EN 60393-1:2009 | Potentiometers for use in electronic equipment - Part 1: Generic specification |
| DIN EN 13980:2003-02 | POTENTIALLY EXPLOSIVE ATMOSPHERES - APPLICATION OF QUALITY SYSTEMS |
| EN 61249-4-11:2005 | Materials for printed boards and other interconnecting structures - Part 4-11: Sectional specification set for prepreg materials, unclad - Non-halogenated epoxide, woven E-glass prepreg of defined flammability |
| EN 50397-2:2009 | Covered conductors for overhead lines and the related accessories for rated voltages above 1 kV AC and not exceeding 36 kV AC - Part 2: Accessories for covered conductors - Tests and acceptance criteria |
| DIN EN 45510-4-4:2002-11 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 4-4: BOILER AUXILIARIES - FUEL PREPARATION EQUIPMENT |
| EN 61160:2005 | Design review |
| EN 61249-4-14 : 2009 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-14: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD (FOR THE MANUFACTURE OF MULTILAYER BOARDS) - EPOXIDE WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST) FOR LEAD-FREE ASSEMBLY |
| UNE-EN 13260:2010 | Railway applications - Wheelsets and bogies - Wheelsets - Product requirements |
| I.S. EN 15167-2:2007 | GROUND GRANULATED BLAST FURNACE SLAG FOR USE IN CONCRETE, MORTAR AND GROUT - PART 2: CONFORMITY EVALUATION |
| I.S. EN 13486:2002 | TEMPERATURE RECORDERS AND THERMOMETERS FOR THE TRANSPORT, STORAGE AND DISTRIBUTION OF CHILLED, FROZEN, DEEP-FROZEN/QUICK-FROZEN FOOD AND ICE CREAM - PERIOD VERIFICATION |
| CEI EN 50187:2023 | High-voltage switchgear and controlgear - Gas-filled compartments of AC switchgear and controlgear with rated voltages above 1 kV up to and including 52 Kv |
| ANSI/AAMI/ISO 17664-1:2022 | Processing of health care products—Information to be provided by the medical device manufacturer for the processing of medical devices—Part 1: Critical and semi-critical medical devices |
| OVE/ONORM EN 61744 : 2006 | CALIBRATION OF FIBRE OPTIC CHROMATIC DISPERSION TEST SETS |
| ISO 10001:2007 | Quality management Customer satisfaction Guidelines for codes of conduct for organizations |
| ISO/IEC 17000:2004 | Conformity assessment Vocabulary and general principles |
| ISO 19011:2011 | Guidelines for auditing management systems |
| ISO 1087-1:2000 | Terminology work Vocabulary Part 1: Theory and application |
| ISO 10015:1999 | Quality management Guidelines for training |
| ISO/IEC 27001:2013 | Information technology — Security techniques — Information security management systems — Requirements |
| ISO/TR 10017:2003 | Guidance on statistical techniques for ISO 9001:2000 |
| ISO 31000:2009 | Risk management Principles and guidelines |
| ISO/TS 16949:2009 | Quality management systems Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations |
| ISO 10019:2005 | Guidelines for the selection of quality management system consultants and use of their services |
| ISO 10241-2:2012 | Terminological entries in standards — Part 2: Adoption of standardized terminological entries |
| ISO 10004:2012 | Quality management Customer satisfaction Guidelines for monitoring and measuring |
| ISO 10014:2006 | Quality management Guidelines for realizing financial and economic benefits |
| ISO 50001:2011 | Energy management systems Requirements with guidance for use |
| ISO 10005:2005 | Quality management systems Guidelines for quality plans |
| ISO 10008:2013 | Quality management — Customer satisfaction — Guidelines for business-to-consumer electronic commerce transactions |
| ISO 10003:2007 | Quality management Customer satisfaction Guidelines for dispute resolution external to organizations |
| ISO 10006:2003 | Quality management systems Guidelines for quality management in projects |
| ISO/IEC Guide 99:2007 | International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
| ISO 10018:2012 | Quality management Guidelines on people involvement and competence |
| ISO 3534-2:2006 | Statistics — Vocabulary and symbols — Part 2: Applied statistics |
| ISO 10002:2014 | Quality management Customer satisfaction Guidelines for complaints handling in organizations |
| ISO 9004:2009 | Managing for the sustained success of an organization A quality management approach |
| ISO/TR 10013:2001 | Guidelines for quality management system documentation |
| ISO 14001:2015 | Environmental management systems — Requirements with guidance for use |
| ISO 10012:2003 | Measurement management systems — Requirements for measurement processes and measuring equipment |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO/IEC Guide 2:2004 | Standardization and related activities — General vocabulary |
| ISO 10241-1:2011 | Terminological entries in standards — Part 1: General requirements and examples of presentation |
| ISO 704:2009 | Terminology work — Principles and methods |
| ISO 10007:2017 | Quality management — Guidelines for configuration management |
| ISO Guide 73:2009 | Risk management — Vocabulary |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.