EN ISO 5659-2:2017
Current
The latest, up-to-date edition.
Plastics - Smoke generation - Part 2: Determination of optical density by a single-chamber test (ISO 5659-2:2017)
21-06-2017
European foreword
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Principles of the test
5 Suitability of a material or product for testing
6 Specimen construction and preparation
7 Apparatus and ancillary equipment
8 Test environment
9 Setting-up and calibration procedures
10 Test procedure
11 Expression of results
12 Precision
13 Test report
Annex A (normative) - Calibration of heat flux meter
Annex B (informative) - Variability in the specific optical
density of smoke measured in the single-chamber test
Annex C (informative) - Determination of mass optical density
Annex D (informative) - Precision data from tests on
intumescent materials
Annex E (informative) - Guidance on optical density testing
Annex F (informative) - Specific sample preparation
Bibliography
ISO 5659-2:2017 specifies a method of measuring smoke production from the exposed surface of specimens of materials or composites. It is applicable to specimens that have an essentially flat surface and do not exceed 25 mm in thickness when placed in a horizontal orientation and subjected to specified levels of thermal irradiance in a closed cabinet with or without the application of a pilot flame. This method of test is applicable to all plastics.It is intended that the values of optical density determined by this test be taken as specific to the specimen or assembly material in the form and thickness tested and are not to be considered inherent, fundamental properties.The test is intended primarily for use in research and development and fire safety engineering in buildings, trains, ships, etc. and not as a basis for ratings for building codes or other purposes. No basis is provided for predicting the density of smoke that can be generated by the materials upon exposure to heat and flame under other (actual) exposure conditions. This test procedure excludes the effect of irritants on the eye.
Committee |
CEN/TC 249
|
DevelopmentNote |
Supersedes EN ISO 5659-1. (01/2013)
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Current
|
Supersedes |
Standards | Relationship |
NS EN ISO 5659-2 : 2017 | Identical |
SS-EN ISO 5659-2:2017 | Identical |
NBN EN ISO 5659-2 : 2013 | Identical |
UNI EN ISO 5659-2 : 2013 | Identical |
NF EN ISO 5659-2 : 2017 | Identical |
DIN EN ISO 5659-2:2017-11 | Identical |
DIN EN ISO 5659-2:2016-02 (Draft) | Identical |
NEN EN ISO 5659-2 : 2017 | Identical |
UNE-EN ISO 5659-2:2018 | Identical |
BS EN ISO 5659-2:2017 | Identical |
UNI EN ISO 5659-2 : 2017 | Identical |
I.S. EN ISO 5659-2:2017 | Identical |
ISO 5659-2:2017 | Identical |
SN EN ISO 5659-2 : 2017 | Identical |
UNE-EN ISO 5659-2:2013 | Identical |
PN EN ISO 5659-2 : 2017 | Identical |
I.S. EN ISO 5659-2:2012 | Identical |
I.S. EN ISO 5659-1:1999 | PLASTICS - SMOKE GENERATION - PART 1: GUIDANCE ON OPTICAL-DENSITY TESTING |
CEI EN 50290-2-25 : 2014 | COMMUNICATION CABLES - PART 2-25: COMMON DESIGN RULES AND CONSTRUCTION - POLYPROPYLENE INSULATION COMPOUNDS |
CEI UNI EN 45545-2 : 2013 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAUVIOR OF MATERIALS AND COMPONENTS |
BS EN 45545-2 : 2013 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS |
XP CEN/TS 45545-2 : 2009 XP | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS |
EN 50290-2-25:2013 | COMMUNICATION CABLES - PART 2-25: COMMON DESIGN RULES AND CONSTRUCTION - POLYPROPYLENE INSULATION COMPOUNDS |
04/19990095 DC : 0 | BS EN 45545-2 - RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS |
DIN EN 16028:2012-10 | Railway applications - Wheel/rail friction management - Lubricants for trainborne and trackside applications |
UNE-EN 50290-2-25:2014 | Communication cables - Part 2-25: Common design rules and construction - Polypropylene insulation compounds |
DIN EN 45545-2:2016-02 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS |
I.S. EN 60695-6-1:2005 | FIRE HAZARD TESTING - PART 6-1: SMOKE OBSCURATION - GENERAL GUIDANCE |
I.S. EN 16028:2012 | RAILWAY APPLICATIONS - WHEEL/RAIL FRICTION MANAGEMENT - LUBRICANTS FOR TRAINBORNE AND TRACKSIDE APPLICATIONS |
I.S. EN 45545-2:2013 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS |
BS EN 60695-6-1 : 2005 | FIRE HAZARD TESTING - PART 6-1: SMOKE OBSCURATION - GENERAL GUIDANCE |
S.R. CEN/TS 45545-2:2009 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS |
EN 60695-6-1:2005/A1:2010 | FIRE HAZARD TESTING - PART 6-1: SMOKE OBSCURATION - GENERAL GUIDANCE |
EN 45545-2:2013+A1:2015 | Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behaviour of materials and components |
UNI CEI EN 45545-2 : 2013 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAUVIOR OF MATERIALS AND COMPONENTS |
13/30281390 DC : 0 | BS EN 50290-2-25 - COMMUNICATION CABLES - PART 2-25: COMMON DESIGN RULES AND CONSTRUCTION - POLYPROPYLENE INSULATION COMPOUNDS |
10/30216687 DC : 0 | BS EN 45545-2 - RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS |
13/30293741 DC : 0 | BS EN 50290-2-37 - COMMUNICATION CABLES - PART 2-37: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION FOR COAXIAL CABLES |
BS EN 50290-2-25:2013 | Communication cables Common design rules and construction. Polypropylene insulation compounds |
BS EN 16028:2012 | Railway applications. Wheel/rail friction management. Lubricants for trainborne and trackside applications |
13/30293736 DC : 0 | BS EN 50290-2-33 - COMMUNICATION CABLES - PART 2-33: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION FOR MULTI ELEMENT METALLIC DATA CABLES FOR INDOOR APPLICATION |
PREN 50290-2-38 : DRAFT 2013 | COMMUNICATION CABLES - PART 2-38: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION FOR COAXIAL CABLES |
UNI EN 16028 : 2012 | RAILWAY APPLICATIONS - WHEEL/RAIL FRICTION MANAGEMENT - LUBRICANTS FOR TRAINBORNE AND TRACKSIDE APPLICATIONS |
PREN 50290-2-33 : DRAFT 2013 | COMMUNICATION CABLES - PART 2-33: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION FOR MULTI ELEMENT METALLIC DATA CABLES FOR INDOOR APPLICATION |
UNI CEI CEN/TS 45545-2 : 2009 | RAILWAY APPLICATIONS - FIRE PROTECTION OF RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS |
DD CEN/TS 45545-2:2009 | Railway applications. Fire protection on railway vehicles Requirements for fire behaviour of materials and components |
PREN 50290-2-37 : DRAFT 2013 | COMMUNICATION CABLES - PART 2-37: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION FOR COAXIAL CABLES |
17/30304297 DC : 0 | BS EN 17084 - RAILWAY APPLICATIONS - FIRE PROTECTION IN RAILWAY VEHICLES - TOXICITY TEST OF MATERIALS AND COMPONENTS |
I.S. EN 50290-2-25:2013 | COMMUNICATION CABLES - PART 2-25: COMMON DESIGN RULES AND CONSTRUCTION - POLYPROPYLENE INSULATION COMPOUNDS |
UNE-EN 16028:2013 | Railway applications - Wheel/rail friction management - Lubricants for trainborne and trackside applications |
IEC 60695-1-10:2016 | Fire hazard testing - Part 1-10: Guidance for assessing the fire hazard of electrotechnical products - General guidelines |
EN ISO 5659-1:1999 | Plastics - Smoke generation - Part 1: Guidance on optical-density testing (ISO 5659-1:1996) |
EN 16028:2012 | Railway applications - Wheel/rail friction management - Lubricants for trainborne and trackside applications |
08/30154274 DC : DRAFT MAR 2008 | BS ISO 25762 - PLASTICS - GUIDANCE ON THE ASSESSMENT OF FIRE CHARACTERISTICS AND FIRE PERFORMANCE OF FIBRE-REINFORCED COMPOSITES |
13/30293745 DC : 0 | BS EN 50290-2-38 - COMMUNICATION CABLES - PART 2-38: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION FOR COAXIAL CABLES |
UNE-EN 45545-2:2013 | Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behavior of materials and components |
PREN 50290-2-25 : DRAFT 2013 | COMMUNICATION CABLES - PART 2-25: COMMON DESIGN RULES AND CONSTRUCTION - POLYPROPYLENE INSULATION COMPOUNDS |
ISO 5659-1:1996 | Plastics Smoke generation Part 1: Guidance on optical-density testing |
BS EN ISO 5659-1:1999 | Plastics. Smoke generation Guidance on optical-density testing |
CEN/TS 45545-2:2009 | Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behaviour of materials and components |
IEC TS 60695-6-31:2013 | Fire hazard testing - Part 6-31: Smoke obscuration - Small-scale static test - Materials |
ISO 1514:2016 | Paints and varnishes — Standard panels for testing |
ISO 5660-1:2015 | Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement) |
ISO 29904:2013 | Fire chemistry — Generation and measurement of aerosols |
IEC 60695-6-1:2005+AMD1:2010 CSV | Fire hazard testing - Part 6-1: Smoke obscuration - General guidance |
ISO 13943:2017 | Fire safety — Vocabulary |
ISO/TS 3814:2014 | Standard tests for measuring reaction-to-fire of products and materials — Their development and application |
BS 6809:1987 | Method for calibration of radiometers for use in fire testing |
ISO 291:2008 | Plastics Standard atmospheres for conditioning and testing |
EN 45545-2:2013+A1:2015 | Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behaviour of materials and components |
ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
ISO 5725:1986 | Precision of test methods Determination of repeatability and reproducibility for a standard test method by inter-laboratory tests |
ISO 19706:2011 | Guidelines for assessing the fire threat to people |
ISO 14934-3:2012 | Fire tests — Calibration and use of heat flux meters — Part 3: Secondary calibration method |
ISO/TR 16312-2:2007 | Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fire hazard and risk assessment Part 2: Evaluation of individual physical fire models |
AFAP-2 : 2010 | NATO REACTION-TO-FIRE TESTS FOR MATERIALS - SMOKE GENERATION |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.