EN ISO 3690:2012
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Welding and allied processes - Determination of hydrogen content in arc weld metal (ISO 3690:2012)
12-09-2018
15-03-2012
Foreword
1 Scope
2 Normative references
3 Principle
4 Test procedures
Annex A (informative) - Recommendations and restrictions
in regard to older methods of measurement using
mercury
Annex B (informative) - Recommendations and restrictions
in regard to older methods of measurement using
glycerin
Annex C (informative) - Accuracy and reproducibility
Bibliography
ISO 3690:2011 specifies the sampling and analytical procedure for the determination of diffusible hydrogen in martensitic, bainitic, and ferritic steel weld metal arising from the welding of such steels using arc welding processes with filler metal.The techniques specified in ISO 3690:2011 include collection of diffusible hydrogen via displacement of mercury or collection into a headspace filled with an inert gas such as argon. The amount of hydrogen collected is determined by measuring the displaced volume in the former and by, for example, thermal conductivity in the latter.The temperature for collection of diffusible hydrogen is controlled to avoid thermal activation of non-diffusible hydrogen.
| Committee |
CEN/TC 121
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| NS EN ISO 3690 : 2012 | Identical |
| BS EN ISO 3690:2012 | Identical |
| ISO 3690:2012 | Identical |
| UNI EN ISO 3690 : 2018 | Identical |
| ÖNORM EN ISO 3690 : 2018 | Identical |
| ISO 3690:2018 | Identical |
| PN EN ISO 3690 : 2012 | Identical |
| I.S. EN ISO 3690:2018 | Identical |
| NEN-EN-ISO 3690:2018 en | Identical |
| NF EN ISO 3690 : 2012 | Identical |
| UNI EN ISO 3690 : 2012 | Identical |
| PN-EN ISO 3690:2018 | Identical |
| ONORM EN ISO 3690 : 2012 | Identical |
| NBN EN ISO 3690 : 2012 | Identical |
| SN EN ISO 3690 : 2012 | Identical |
| I.S. EN ISO 3690:2012 | Identical |
| DIN EN ISO 3690:2018-12 | Identical |
| BS EN ISO 3690:2018 | Identical |
| DIN EN ISO 3690:2012-07 | Identical |
| NEN EN ISO 3690 : 2012 | Identical |
| UNE-EN ISO 3690:2001 | Identical |
| UNE-EN ISO 3690:2012 | Identical |
| DIN EN 1011-2:2001-05 | WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 2: ARC WELDING OF FERRITIC STEELS |
| PREN 13479 : DRAFT 2014 | WELDING CONSUMABLES - GENERAL PRODUCT STANDARD FOR FILLER METALS AND FLUXES FOR FUSION WELDING OF METALLIC MATERIALS |
| DIN EN 14532-1:2005-02 | WELDING CONSUMABLES - TEST METHODS AND QUALITY REQUIREMENTS - PART 1: PRIMARY METHODS AND CONFORMITY ASSESSMENT OF CONSUMABLES FOR STEEL, NICKEL AND NICKEL ALLOYS |
| PREN 764-4 : DRAFT 2012 | PRESSURE EQUIPMENT - PART 4: ESTABLISHMENT OF TECHNICAL DELIVERY CONDITIONS FOR METALLIC MATERIALS |
| BS EN 14532-1:2004 | Welding consumables. Test methods and quality requirements Primary methods and conformity assessment of consumables for steel, nickel and nickel alloys |
| I.S. EN 764-4:2014 | PRESSURE EQUIPMENT - PART 4: ESTABLISHMENT OF TECHNICAL DELIVERY CONDITIONS FOR METALLIC MATERIALS |
| 12/30259070 DC : 0 | BS EN 764-4 - PRESSURE EQUIPMENT - PART 4: ESTABLISHMENT OF TECHNICAL DELIVERY CONDITIONS FOR METALLIC MATERIALS |
| BS PD EN ISO/TR 17844 : 2004 | WELDING - COMPARISON OF STANDARDIZED METHODS FOR THE AVOIDANCE OF COLD CRACKS |
| 14/30312130 DC : 0 | BS EN 13479 - WELDING CONSUMABLES - GENERAL PRODUCT STANDARD FOR FILLER METALS AND FLUXES FOR FUSION WELDING OF METALLIC MATERIALS |
| DIN EN 14532-2:2005-02 | WELDING CONSUMABLES - TEST METHODS AND QUALITY REQUIREMENTS - PART 2: SUPPLEMENTARY METHODS AND CONFORMITY ASSESSMENT OF CONSUMABLES FOR STEEL, NICKEL AND NICKEL ALLOYS |
| DIN EN ISO 17642-3:2005-09 | Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Part 3: Externally loaded tests (ISO 17642-3:2005) |
| BS EN ISO 17642-2:2005 | Destructive tests on welds in metallic materials. Cold cracking tests for weldments. Arc welding processes Self-restraint tests |
| DIN EN ISO 17642-2:2005-09 | Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Part 2: Self-restraint tests (ISO 17642-2:2005) |
| UNE-EN 764-4:2015 | Pressure equipment - Part 4: Establishment of technical delivery conditions for metallic materials |
| EN ISO 17642-3:2005 | Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Part 3: Externally loaded tests (ISO 17642-3:2005) |
| 02/710858 DC : DRAFT SEP 2002 | BS EN 14532-1 - WELDING CONSUMABLES - TEST METHODS AND QUALITY REQUIREMENTS - PART 1: PRIMARY METHODS AND CONFORMITY ASSESSMENT OF CONSUMABLES FOR STEEL, NICKEL AND NICKEL ALLOYS |
| 02/710859 DC : DRAFT SEP 2002 | BS EN 14532-2 - WELDING CONSUMABLES - TEST METHODS AND QUALITY REQUIREMENTS - PART 2: SUPPLEMENTARY METHODS AND CONFORMITY ASSESSMENT OF CONSUMABLES FOR STEEL, NICKEL AND NICKEL ALLOYS |
| BS EN 14532-2:2004 | Welding consumables. Test methods and quality requirements Supplementary mekthods and conformity assessment of consumables for steel, nickel and nickel alloys |
| ISO/TR 17844:2004 | Welding Comparison of standardised methods for the avoidance of cold cracks |
| BS EN 764-4:2014 | Pressure equipment Establishment of technical delivery conditions for metallic materials |
| BS EN ISO 17642-3:2005 | Destructive tests on welds in metallic materials. Cold cracking tests for weldments. Arc welding processes Externally loaded tests |
| ISO 17642-2:2005 | Destructive tests on welds in metallic materials — Cold cracking tests for weldments — Arc welding processes — Part 2: Self-restraint tests |
| EN 14532-1:2004 | Welding consumables - Test methods and quality requirements - Part 1: Primary methods and conformity assessment of consumables for steel, nickel and nickel alloys |
| EN 14532-2:2004 | Welding consumables - Test methods and quality requirements - Part 2: Supplementary methods and conformity assessment of consumables for steel, nickel and nickel alloys |
| EN ISO 17642-2:2005 | Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Part 2: Self-restraint tests (ISO 17642-2:2005) |
| EN ISO/TR 17844 : 2004 | WELDING - COMPARISON OF STANDARDISED METHODS FOR THE AVOIDANCE OF COLD CRACKS |
| EN 764-4:2014 | Pressure equipment - Part 4: Establishment of technical delivery conditions for metallic materials |
| I.S. CEN ISO TR 17844:2004 | WELDING - COMPARISON OF STANDARDISED METHODS FOR THE AVOIDANCE OF COLD CRACKS |
| UNI CEN ISO/TR 17844 : 2012 | WELDING - COMPARISON OF STANDARDISED METHODS FOR THE AVOIDANCE OF COLD CRACKS |
| KTA 3201.3 : 2007(R2012) | COMPONENTS OF THE REACTOR COOLANT PRESSURE BOUNDARY OF LIGHT WATER REACTORS - PART 3: MANUFACTURE |
| DIN EN 764-4:2015-03 | PRESSURE EQUIPMENT - PART 4: ESTABLISHMENT OF TECHNICAL DELIVERY CONDITIONS FOR METALLIC MATERIALS |
| ISO 17642-3:2005 | Destructive tests on welds in metallic materials — Cold cracking tests for weldments — Arc welding processes — Part 3: Externally loaded tests |
| ISO 2560:2009 | Welding consumables Covered electrodes for manual metal arc welding of non-alloy and fine grain steels Classification |
| DIN 8572-1:1981-03 | DETERMINATION OF HYDROGEN IN DEPOSITED WELD METAL; MANUAL ARC WELDING WITH COVERED ELECTRODE |
| AWS A4.3 : 1993 | DETERMINATION OF THE DIFFUSIBLE HYDROGEN CONTENT OF MARTENSITIC, BAINITIC, AND FERRITIC STEEL WELD METAL PRODUCED BY ARC WELDING |
| ISO 80000-1:2009 | Quantities and units — Part 1: General |
| ISO/TR 17671-1:2002 | Welding Recommendations for welding of metallic materials Part 1: General guidance for arc welding |
| ISO 14175:2008 | Welding consumables — Gases and gas mixtures for fusion welding and allied processes |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.