• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN ISO 15630-2:2010

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

Steel for the reinforcement and prestressing of concrete - Test methods - Part 2: Welded fabric (ISO 15630-2:2010)

Superseded date

13-03-2019

Published date

15-10-2010

Sorry this product is not available in your region.

Foreword
Introduction
1 Scope
2 Normative references
3 Symbols
4 General provisions concerning test pieces
5 Tensile test
6 Bend test on welded intersection
7 Determination of the weld shear force (F[s])
8 Axial force fatigue test
9 Chemical analysis
10 Measurement of the geometrical characteristics of
   the fabric
11 Test report
Bibliography

ISO 15630-2:2010 specifies test methods applicable to welded fabric for the reinforcement of concrete.

Committee
CEN/TC 459/SC 4
DevelopmentNote
Supersedes ENV 10080. (07/2002)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Superseded
SupersededBy
Supersedes

DIN V 1201:2004-08 CONCRETE PIPES AND FITTINGS, UNREINFORCED, STEEL FIBRE AND REINFORCED FOR DRAINS AND SEWERS - TYPE 1 AND TYPE 2 - REQUIREMENTS, TEST METHODS AND EVALUATION OF CONFORMITY
DIN EN 15381:2008-11 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN PAVEMENTS AND ASPHALT OVERLAYS
I.S. EN 15381:2008 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN PAVEMENTS AND ASPHALT OVERLAYS
04/30127152 DC : DRAFT DEC 2004 EN ISO 17660-1 - WELDING - WELDING OF REINFORCING STEEL - PART 1: LOAD BEARING WELDED JOINTS
UNE-EN 15381:2008 Geotextiles and geotextile-related products - Characteristics required for use in pavements and asphalt overlays
UNI EN 10080 : 2005 STEEL FOR THE REINFORCEMENT OF CONCRETE - WELDABLE REINFORCING STEEL - GENERAL
UNI EN 15381 : 2008 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN PAVEMENTS AND ASPHALT OVERLAYS
I.S. EN 10080:2005 STEEL FOR THE REINFORCEMENT OF CONCRETE - WELDABLE REINFORCING STEEL - GENERAL
EN 15381:2008 Geotextiles and geotextile-related products - Characteristics required for use in pavements and asphalt overlays
BS EN 15381:2008 Geotextiles and geotextile-related products. Characteristics required for use in pavements and asphalt overlays
EN 10080:2005 Steel for the reinforcement of concrete - Weldable reinforcing steel - General
DIN EN 10080:2005-08 STEEL FOR THE REINFORCEMENT OF CONCRETE - WELDABLE REINFORCING STEEL - GENERAL

ISO 4945:1977 Steel Determination of nitrogen content Spectrophotometric method
ISO 10701:1994 Steel and iron — Determination of sulfur content — Methylene blue spectrophotometric method
ISO 13898-2:1997 Steel and iron Determination of nickel, copper and cobalt contents Inductively coupled plasma atomic emission spectrometric method Part 2: Determination of nickel content
ISO 671:1982 Steel and cast iron Determination of sulphur content Combustion titrimetric method
ISO 4947:1986 Steel and cast iron Determination of vanadium content Potentiometric titration method
ISO 10697-1:1992 Steel — Determination of calcium content by flame atomic absorption spectrometry — Part 1: Determination of acid-soluble calcium content
ISO 15353:2001 Steel and iron — Determination of tin content — Flame atomic absorption spectrometric method (extraction as Sn-SCN)
ISO 4946:2016 Steel and cast iron Determination of copper 2,2'-Biquinoline spectrophotometric method
ISO/TR 17055:2002 Steel Determination of silicon content Inductively coupled plasma atomic emission spectrometric method
ISO 11652:1997 Steel and iron Determination of cobalt content Flame atomic absorption spectrometric method
ISO 17053:2005 Steel and iron — Determination of oxygen — Infrared method after fusion under inert gas
ISO 10702:1993 Steel and iron — Determination of nitrogen content — Titrimetric method after distillation
ISO 13898-3:1997 Steel and iron Determination of nickel, copper and cobalt contents Inductively coupled plasma atomic emission spectrometric method Part 3: Determination of copper content
ISO 4829-1:1986 Steel and cast iron Determination of total silicon content Reduced molybdosilicate spectrophotometric method Part 1: Silicon contents between 0,05 and 1,0 %
ISO 4941:1994 Steel and iron — Determination of molybdenum content — Thiocyanate spectrophotometric method
ISO 13900:1997 Steel — Determination of boron content — Curcumin spectrophotometric method after distillation
ISO 10278:1995 Steel — Determination of manganese content — Inductively coupled plasma atomic emission spectrometric method
ISO 6892-1:2016 Metallic materials Tensile testing Part 1: Method of test at room temperature
ISO 4937:1986 Steel and iron — Determination of chromium content — Potentiometric or visual titration method
ISO 13902:1997 Steel and iron — Determination of high sulfur content — Infrared absorption method after combustion in an induction furnace
ISO 4943:1985 Steel and cast iron — Determination of copper content — Flame atomic absorption spectrometric method
ISO 629:1982 Steel and cast iron — Determination of manganese content — Spectrophotometric method
ISO 4939:2016 Steel Determination of nickel Dimethylglyoxime spectrophotometric method
ISO 4935:1989 Steel and iron — Determination of sulfur content — Infrared absorption method after combustion in an induction furnace
ISO 17058:2004 Steel and iron — Determination of arsenic content — Spectrophotometric method
ISO/TR 15349-3:1998 Unalloyed steel Determination of low carbon content Part 3: Infrared absorption method after combustion in an electric resistance furnace (with preheating)
ISO 13898-4:1997 Steel and iron Determination of nickel, copper and cobalt contents Inductively coupled plasma atomic emission spectrometric method Part 4: Determination of cobalt content
ISO/TS 13899-3:2005 Steel — Determination of Mo, Nb and W contents in alloyed steel — Inductively coupled plasma atomic emission spectrometric method — Part 3: Determination of W content
ISO 10280:1991 Steel and iron — Determination of titanium content — Diantipyrylmethane spectrometric method
ISO 4938:2016 Steel and iron Determination of nickel content Gravimetric or titrimetric method
ISO 9513:2012 Metallic materials — Calibration of extensometer systems used in uniaxial testing
ISO/TR 10719:1994 Steel and iron Determination of non-combined carbon content Infrared absorption method after combustion in an induction furnace
ISO 439:1994 Steel and iron Determination of total silicon content Gravimetric method
ISO 7438:2016 Metallic materials Bend test
ISO 11653:1997 Steel — Determination of high cobalt content — Potentiometric titration method after separation by ion exchange
ISO 4942:2016 Steels and irons Determination of vanadium content N-BPHA spectrophotometric method
ISO/TR 4830-4:1978 Steel Determination of low carbon contents Part 4: Coulometric method after combustion
ISO 437:1982 Steel and cast iron Determination of total carbon content Combustion gravimetric method
ISO 9658:1990 Steel — Determination of aluminium content — Flame atomic absorption spectrometric method
ISO/TS 13899-1:2004 Steel — Determination of Mo, Nb and W contents in alloyed steel — Inductively coupled plasma atomic emission spectrometric method — Part 1: Determination of Mo content
ISO 4940:1985 Steel and cast iron — Determination of nickel content — Flame atomic absorption spectrometric method
ISO 10700:1994 Steel and iron — Determination of manganese content — Flame atomic absorption spectrometric method
ISO 15351:1999 Steel and iron — Determination of nitrogen content — Thermal conductimetric method after fusion in a current of inert gas (Routine method)
ISO 10714:1992 Steel and iron — Determination of phosphorus content — Phosphovanadomolybdate spectrophotometric method
ISO 4829-2:2016 Steels Determination of total silicon contents Reduced molybdosilicate spectrophotometric method Part 2: Silicon contents between 0,01 % and 0,05 %
ISO 15349-2:1999 Unalloyed steel Determination of low carbon content Part 2: Infrared absorption method after combustion in an induction furnace (with preheating)
ISO 17054:2010 Routine method for analysis of high alloy steel by X-ray fluorescence spectrometry (XRF) by using a near-by technique
ISO 9647:1989 Steel and iron Determination of vanadium content Flame atomic absorption spectrometric method
ISO 13899-2:2005 Steel — Determination of Mo, Nb and W contents in alloyed steel — Inductively coupled plasma atomic emission spectrometric method — Part 2: Determination of Nb content
ISO 9441:1988 Steel — Determination of niobium content — PAR spectrophotometric method
ISO 15350:2000 Steel and iron — Determination of total carbon and sulfur content — Infrared absorption method after combustion in an induction furnace (routine method)
ISO 13898-1:1997 Steel and iron Determination of nickel, copper and cobalt contents Inductively coupled plasma atomic emission spectrometric method Part 1: General requirements and sample dissolution
ISO 9556:1989 Steel and iron — Determination of total carbon content — Infrared absorption method after combustion in an induction furnace
ISO 7500-1:2015 Metallic materials Calibration and verification of static uniaxial testing machines Part 1: Tension/compression testing machines Calibration and verification of the force-measuring system
ISO 4934:2003 Steel and iron Determination of sulfur content Gravimetric method
ISO 16918-1:2009 Steel and iron — Determination of nine elements by the inductively coupled plasma mass spectrometric method — Part 1: Determination of tin, antimony, cerium, lead and bismuth
ISO 10720:1997 Steel and iron — Determination of nitrogen content — Thermal conductimetric method after fusion in a current of inert gas
ISO 10153:1997 Steel — Determination of boron content — Curcumin spectrophotometric method
ISO 10698:1994 Steel — Determination of antimony content — Electrothermal atomic absorption spectrometric method
ISO 10138:1991 Steel and iron — Determination of chromium content — Flame atomic absorption spectrometric method
ISO 10697-2:1994 Steel — Determination of calcium content by flame atomic absorption spectrometry — Part 2: Determination of total calcium content
ISO/TR 15349-1:1998 Unalloyed steel Determination of low carbon content Part 1: Infrared absorption method after combustion in an electric resistance furnace (by peak separation)
ISO 15355:1999 Steel and iron — Determination of chromium content — Indirect titration method

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.