EN ISO 15403-1:2008
Current
The latest, up-to-date edition.
Natural gas - Natural gas for use as a compressed fuel for vehicles - Part 1: Designation of the quality (ISO 15403-1:2006)
09-01-2008
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations
5 Gas composition requirements
6 Gas properties
7 Driveability
8 Test methods
9 Sampling
Annex A (informative) - Propane and butane content
Annex B (informative) - Wobbe index range
Annex C (informative) - Engine knock
Annex D (informative) - Methane number and octane number
Annex E (informative) - Water content of natural gas
Bibliography
The aim of ISO 15403-1:2006 is to provide manufacturers, vehicle operators, fuelling station operators and others involved in the compressed-natural-gas vehicle industry with information on the fuel quality for natural gas vehicles (NGVs) required to develop and operate compressed-natural-gas vehicle equipment successfully.Fuel meeting the requirements of ISO 15403-1:2006 should provide for the safe operation of the vehicle and associated equipment needed for its fuelling and maintenance, protect the fuel system from the detrimental effects of corrosion, poisoning, and liquid or solid deposition and provide satisfactory vehicle performance under any and all conditions of climate and driving demands.Some aspects of ISO 15403-1:2006 may also be applicable for the use of natural gas in stationary combustion engines.
| Committee |
CEN/TC 238
|
| DevelopmentNote |
Supersedes EN ISO 15403. (08/2010)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| UNI EN ISO 15403-1 : 2008 | Identical |
| ISO 15403-1:2006 | Identical |
| PN EN ISO 15403-1 : 2010 | Identical |
| I.S. EN ISO 15403-1:2008 | Identical |
| SN EN ISO 15403-1:2008 | Identical |
| UNE-EN ISO 15403-1:2008 | Identical |
| BS EN ISO 15403-1:2008 | Identical |
| NBN EN ISO 15403-1 : 2008 | Identical |
| NF EN ISO 15403-1 : 2008 | Identical |
| DIN EN ISO 15403-1:2009-10 | Identical |
| NS EN ISO 15403-1 : 1ED 2008 | Identical |
| SS-EN ISO 15403-1 : 2008 | Identical |
| NEN EN ISO 15403-1 : 2008 | Identical |
| BS EN 16723-2:2017 | Natural gas and biomethane for use in transport and biomethane for injection in the natural gas network Automotive fuels specification |
| I.S. EN 16723-2:2017 | NATURAL GAS AND BIOMETHANE FOR USE IN TRANSPORT AND BIOMETHANE FOR INJECTION IN THE NATURAL GAS NETWORK - PART 2: AUTOMOTIVE FUELS SPECIFICATION |
| DIN EN 16723-2:2017-10 | NATURAL GAS AND BIOMETHANE FOR USE IN TRANSPORT AND BIOMETHANE FOR INJECTION IN THE NATURAL GAS NETWORK - PART 2: AUTOMOTIVE FUELS SPECIFICATION |
| DIN EN 16723-2:2014-06 (Draft) | NATURAL GAS AND BIOMETHANE FOR USE IN TRANSPORT AND BIOMETHANE FOR INJECTION IN THE NATURAL GAS NETWORK - PART 2: AUTOMOTIVE FUELS SPECIFICATION |
| 14/30296487 DC : 0 | BS EN 16723-1 - NATURAL GAS AND BIOMETHANE FOR USE IN TRANSPORT AND BIOMETHANE FOR INJECTION IN THE NATURAL GAS NETWORK - PART 1: SPECIFICATIONS FOR BIOMETHANE FOR INJECTION IN THE NATURAL GAS NETWORK |
| I.S. EN 16723-1:2016 | NATURAL GAS AND BIOMETHANE FOR USE IN TRANSPORT AND BIOMETHANE FOR INJECTION IN THE NATURAL GAS NETWORK - PART 1: SPECIFICATIONS FOR BIOMETHANE FOR INJECTION IN THE NATURAL GAS NETWORK |
| UNE-EN 16723-1:2017 | Natural gas and biomethane for use in transport and biomethane for injection in the natural gas network - Part 1: Specifications for biomethane for injection in the natural gas network |
| BS EN 16723-1:2016 | Natural gas and biomethane for use in transport and biomethane for injection in the natural gas network Specifications for biomethane for injection in the natural gas network |
| EN 16723-2:2017 | Natural gas and biomethane for use in transport and biomethane for injection in the natural gas network - Part 2: Automotive fuels specification |
| EN 16723-1:2016 | Natural gas and biomethane for use in transport and biomethane for injection in the natural gas network - Part 1: Specifications for biomethane for injection in the natural gas network |
| ISO 6570-1:1983 | Natural gas Determination of potential hydrocarbon liquid content Part 1: Principles and general requirements |
| ISO 10715:1997 | Natural gas — Sampling guidelines |
| ISO 5164:2014 | Petroleum products — Determination of knock characteristics of motor fuels — Research method |
| ISO 6976:2016 | Natural gas — Calculation of calorific values, density, relative density and Wobbe indices from composition |
| ISO 6327:1981 | Gas analysis — Determination of the water dew point of natural gas — Cooled surface condensation hygrometers |
| ISO 12213-3:2006 | Natural gas Calculation of compression factor Part 3: Calculation using physical properties |
| ISO 7941:1988 | Commercial propane and butane Analysis by gas chromatography |
| ISO 10101-1:1993 | Natural gas — Determination of water by the Karl Fischer method — Part 1: Introduction |
| ISO 13734:2013 | Natural gas — Organic components used as odorants — Requirements and test methods |
| ISO 13686:2013 | Natural gas Quality designation |
| EN 589:2008+A1:2012 | Automotive fuels - LPG - Requirements and test methods |
| ISO 5163:2014 | Petroleum products — Determination of knock characteristics of motor and aviation fuels — Motor method |
| EN 437:2003+A1:2009 | Test gases - Test pressures - Appliance categories |
| ISO 14532:2014 | Natural gas — Vocabulary |
| NFPA 52 : 2016 | VEHICULAR NATURAL GAS FUEL SYSTEMS CODE |
| ISO 10101-2:1993 | Natural gas — Determination of water by the Karl Fischer method — Part 2: Titration procedure |
| ISO 13443:1996 | Natural gas Standard reference conditions |
| ISO 10101-3:1993 | Natural gas — Determination of water by the Karl Fischer method — Part 3: Coulometric procedure |
| ISO 6326-1:2007 | Natural gas Determination of sulfur compounds Part 1: General introduction |
| ISO 11541:1997 | Natural gas Determination of water content at high pressure |
| AGA NGV 2 : 1992 | BASIC REQUIREMENTS FOR COMPRESSED NATURAL GAS VEHICLE (NGV) FUEL CONTAINERS |
| ISO 12213-1:2006 | Natural gas Calculation of compression factor Part 1: Introduction and guidelines |
| ISO 6326-5:1989 | Natural gas Determination of sulfur compounds Part 5: Lingener combustion method |
| ISO 6326-3:1989 | Natural gas Determination of sulfur compounds Part 3: Determination of hydrogen sulfide, mercaptan sulfur and carbonyl sulfide sulfur by potentiometry |
| ISO 6326-4:1994 | Natural gas — Determination of sulfur compounds — Part 4: Gas chromatographic method using a flame photometric detector for the determination of hydrogen sulfide, carbonyl sulfide and sulfur-containing odorants |
| ISO 12213-2:2006 | Natural gas Calculation of compression factor Part 2: Calculation using molar-composition analysis |
| SAE J1616_201703 | Recommended Practice for Compressed Natural Gas Vehicle Fuel |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.