EN ISO 14692-2:2017
Current
The latest, up-to-date edition.
Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 2: Qualification and manufacture (ISO 14692-2:2017)
13-09-2017
European foreword
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions, symbols and
abbreviated terms
4 Manufacturer's declarations
5 Qualification programme
6 Requalification
7 Quality programme for manufacture
8 Component marking
9 Handling, storage and transportation
10 Documentation
Annex A (normative) - Gradients and
temperature limits
Annex B (normative) - Long term envelope
data points
Annex C (normative) - Survival tests
Annex D (normative) - Scaling rules
Annex E (normative) - Representative products
Annex F (normative) - Flange qualification
Annex G (normative) - Major Poissons ratio
Annex H (normative) - Fire endurance testing
Annex I (normative) - Alternate material
qualification
Annex J (normative) - Visual inspection
Annex K (informative) - Example of qualification
summary form
Bibliography
ISO 14692-2:2017 gives requirements for the qualification and manufacture of GRP piping and fittings in order to enable the purchase of GRP components with known and consistent properties from any source.It is applicable to qualification procedures, preferred dimensions, quality programmes, component marking and documentation.ISO 14692-2:2017 is intended to be read in conjunction with ISO 14692‑1.
| Committee |
CEN/TC 12
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| DIN EN ISO 14692-2:2018-02 | Identical |
| UNI EN ISO 14692-2 : 2017 | Identical |
| SS-EN ISO 14692-2:2017 | Identical |
| BS EN ISO 14692-2:2002 | Identical |
| ISO 14692-2:2017 | Identical |
| UNE-EN ISO 14692-2:2017 | Identical |
| NBN EN ISO 14692-2 : 2003 COR 2006 | Identical |
| SN EN ISO 14692-2 : 2017 | Identical |
| NS EN ISO 14692-2 : 2017 | Identical |
| I.S. EN ISO 14692-2:2017 | Identical |
| DIN EN ISO 14692-2:2015-09 (Draft) | Identical |
| NF EN ISO 14692-2 : 2017 | Identical |
| PN EN ISO 14692-2 : 2017 | Identical |
| NEN EN ISO 14692-2 : 2017 | Identical |
| ONORM EN ISO 14692-2 : 2018 | Identical |
| UNI EN ISO 14692-2 : 2004 | Identical |
| BS EN ISO 14692-2:2017 | Identical |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| ASTM D 3859 : 2015 : REDLINE | Standard Test Methods for Selenium in Water |
| ISO 9712:2012 | Non-destructive testing Qualification and certification of NDT personnel |
| ISO 75:1987 | Plastics and ebonite Determination of temperature of deflection under load |
| ASME PV CODE 8 DIV 1 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 1 |
| API SPEC 15HR : 2016 | HIGH-PRESSURE FIBERGLASS LINE PIPE |
| ISO 1172:1996 | Textile-glass-reinforced plastics — Prepregs, moulding compounds and laminates — Determination of the textile-glass and mineral-filler content — Calcination methods |
| ISO 11359-2:1999 | Plastics Thermomechanical analysis (TMA) Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature |
| ISO 14692-4:2017 | Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 4: Fabrication, installation and operation |
| ISO 11357-2:2013 | Plastics Differential scanning calorimetry (DSC) Part 2: Determination of glass transition temperature and glass transition step height |
| ISO 14692-1:2017 | Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 1: Vocabulary, symbols, applications and materials |
| ASTM D 696 : 2016 : REDLINE | Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between −30°C and 30°C with a Vitreous Silica Dilatometer |
| ISO 14130:1997 | Fibre-reinforced plastic composites — Determination of apparent interlaminar shear strength by short-beam method |
| ISO 834-1:1999 | Fire-resistance tests Elements of building construction Part 1: General requirements |
| ISO 4901:2011 | Reinforced plastics based on unsaturated-polyester resins Determination of the residual styrene monomer content, as well as the content of other volatile aromatic hydrocarbons, by gas chromatography |
| ASTM D 2992 : 2012 | Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings |
| ISO 14692-3:2017 | Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 3: System design |
| ASTM D 638 : 2014 : REDLINE | Standard Test Method for Tensile Properties of Plastics |
| ASME RTP 1 : 2015 | REINFORCED THERMOSET PLASTIC CORROSION-RESISTANT EQUIPMENT |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.