EN ISO 12922:2012
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU (ISO 12922:2012)
Superseded date
12-03-2020
Superseded by
Published date
01-12-2012
Publisher
Sorry this product is not available in your region.
Foreword
1 Scope
2 Normative references
3 Sampling
4 Requirements for fire-resistant hydraulic fluids and
less-flammable hydraulic fluids
Annex A (informative) - Spray ignition characteristics
Bibliography
ISO 12922:2012 specifies the minimum requirements of unused fire-resistant and less-flammable hydraulic fluids for hydrostatic and hydrodynamic systems in general industrial applications. It is not intended for use in aerospace or power-generation applications, where different requirements apply. It provides guidance for suppliers and end users of these less hazardous fluids and to the manufacturers of hydraulic equipment in which they are used.Of the categories covered by ISO 6743-4, which classifies the different types of fluids used in hydraulic applications, only the following are detailed in this International Standard: HFAE, HFAS, HFB, HFC, HFDR and HFDU.
| Committee |
CEN/TC 19
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| NF EN ISO 12922 : 2013 | Identical |
| ISO 12922:2012 | Identical |
| NBN EN ISO 12922 : 2013 | Identical |
| NEN EN ISO 12922 : 2012 | Identical |
| NS EN ISO 12922 : 2012 | Identical |
| I.S. EN ISO 12922:2012 | Identical |
| PN EN ISO 12922 : 2013 | Identical |
| SN EN ISO 12922 : 2013 | Identical |
| UNI EN ISO 12922 : 2013 | Identical |
| SS-EN ISO 12922:2012 | Identical |
| BS EN ISO 12922:2012 | Identical |
| UNE-EN ISO 12922:2013 | Identical |
| DIN EN ISO 12922:2013-04 | Identical |
| ONORM EN ISO 12922 : 2013 | Identical |
| DIN EN ISO 12922:2019-03 (Draft) | Identical |
| PD CEN/TR 14489:2005 | Fire-resistant hydraulic fluids. Classification and specification. Guidelines on selection for the protection of safety, health and the environment |
| BS EN 12111:2014 | Tunnelling machines. Road headers and continuous miners. Safety requirements |
| EN 16191:2014 | Tunnelling machinery - Safety requirements |
| UNI EN 16191 : 2014 | TUNNELLING MACHINERY - SAFETY REQUIREMENTS |
| BS EN 16191:2014 | Tunnelling machinery. Safety requirements |
| I.S. EN 12111:2014 | TUNNELLING MACHINES - ROAD HEADERS AND CONTINUOUS MINERS - SAFETY REQUIREMENTS |
| DIN EN 16191:2014-09 | TUNNELLING MACHINERY - SAFETY REQUIREMENTS |
| UNE-EN 16807:2017 | Liquid petroleum products - Bio-lubricants - Criteria and requirements of bio-lubricants and bio-based lubricants |
| DIN EN 1710:2008-08 | EQUIPMENT AND COMPONENTS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES |
| UNI EN 12111 : 2014 | TUNNELLING MACHINES - ROAD HEADERS AND CONTINUOUS MINERS - SAFETY REQUIREMENTS |
| UNI EN 1710 : 2008 | EQUIPMENT AND COMPONENTS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES |
| DIN EN 16191 E : 2014 | TUNNELLING MACHINERY - SAFETY REQUIREMENTS |
| 10/30233949 DC : 0 | BS EN 12111 - TUNNELLING MACHINES - ROAD HEADERS, CONTINUOUS MINERS AND IMPACT RIPPERS - SAFETY REQUIREMENTS |
| BS EN 16807:2016 | Liquid petroleum products. Bio-lubricants. Criteria and requirements of bio-lubricants and bio-based lubricants |
| I.S. EN 16191:2014 | TUNNELLING MACHINERY - SAFETY REQUIREMENTS |
| I.S. EN 16807:2016 | LIQUID PETROLEUM PRODUCTS - BIO-LUBRICANTS - CRITERIA AND REQUIREMENTS OF BIO-LUBRICANTS AND BIO-BASED LUBRICANTS |
| I.S. CEN/TR 14489:2005 | FIRE-RESISTANT HYDRAULIC FLUIDS - CLASSIFICATION AND SPECIFICATION - GUIDELINES ON SELECTION FOR THE PROTECTION OF SAFETY, HEALTH AND THE ENVIRONMENT |
| BS EN 1710 : 2005 | EQUIPMENT AND COMPONENTS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES |
| CEN/TR 14489:2005 | Fire-resistant hydraulic fluids - Classification and specification - Guidelines on selection for the protection of safety, health and the environment |
| EN 16807:2016 | Liquid petroleum products - Bio-lubricants - Criteria and requirements of bio-lubricants and bio-based lubricants |
| 14/30312370 DC : 0 | BS EN 16807 - LIQUID PETROLEUM PRODUCTS - BIO-LUBRICANTS - CRITERIA AND REQUIREMENTS OF BIO-LUBRICANTS AND BIO-BASED LUBRICANTS |
| 15/30310648 DC : 0 | BS ISO 15380 - LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY H (HYDRAULIC SYSTEMS) - SPECIFICATIONS FOR HYDRAULIC FLUIDS IN CATEGORIES HETG, HEPG, HEES AND HEPR |
| EN 12111:2014 | Tunnelling machines - Road headers and continuous miners - Safety requirements |
| ISO 20764:2003 | Petroleum and related products — Preparation of a test portion of high-boiling liquids for the determination of water content — Nitrogen purge method |
| ISO 20844:2015 | Petroleum and related products — Determination of the shear stability of polymer-containing oils using a diesel injector nozzle |
| ISO 3170:2004 | Petroleum liquids — Manual sampling |
| ISO 4263-3:2015 | Petroleum and related products Determination of the ageing behaviour of inhibited oils and fluids using the TOST test Part 3: Anhydrous procedure for synthetic hydraulic fluids |
| ISO 3675:1998 | Crude petroleum and liquid petroleum products Laboratory determination of density Hydrometer method |
| ISO 4263-2:2003 | Petroleum and related products Determination of the ageing behaviour of inhibited oils and fluids TOST test Part 2: Procedure for category HFC hydraulic fluids |
| ISO 14635-1:2000 | Gears — FZG test procedures — Part 1: FZG test method A/8,3/90 for relative scuffing load-carrying capacity of oils |
| ISO 5598:2008 | Fluid power systems and components Vocabulary |
| ISO 7120:1987 | Petroleum products and lubricants — Petroleum oils and other fluids — Determination of rust-preventing characteristics in the presence of water |
| ISO 20783-2:2003 | Petroleum and related products — Determination of emulsion stability of fire-resistant fluids — Part 2: Fluids in category HFB |
| ISO 6247:1998 | Petroleum products — Determination of foaming characteristics of lubricating oils |
| ISO 2160:1998 | Petroleum products Corrosiveness to copper Copper strip test |
| ISO 9120:1997 | Petroleum and related products — Determination of air-release properties of steam turbine and other oils — Impinger method |
| ISO 20623:2003 | Petroleum and related products Determination of the extreme-pressure and anti-wear properties of fluids Four ball method (European conditions) |
| ISO 4404-2:2010 | Petroleum and related products Determination of the corrosion resistance of fire-resistant hydraulic fluids Part 2: Non-aqueous fluids |
| ISO 4404-1:2012 | Petroleum and related products — Determination of the corrosion resistance of fire-resistant hydraulic fluids — Part 1: Water-containing fluids |
| ISO 12185:1996 | Crude petroleum and petroleum products — Determination of density — Oscillating U-tube method |
| ISO 20843:2011 | Petroleum and related products Determination of pH of fire-resistant fluids within categories HFAE, HFAS and HFC |
| ISO 6072:2011 | Rubber Compatibility between hydraulic fluids and standard elastomeric materials |
| ISO 20763:2004 | Petroleum and related products — Determination of anti-wear properties of hydraulic fluids — Vane pump method |
| ISO 20783-1:2011 | Petroleum and related products Determination of emulsion stability of fire-resistant fluids Part 1: Fluids in category HFAE |
| ISO 3733:1999 | Petroleum products and bituminous materials — Determination of water — Distillation method |
| ISO 20823:2003 | Petroleum and related products Determination of the flammability characteristics of fluids in contact with hot surfaces Manifold ignition test |
| ISO 6296:2000 | Petroleum products Determination of water Potentiometric Karl Fischer titration method |
| ISO 4259:2006 | Petroleum products Determination and application of precision data in relation to methods of test |
| EN 14832:2005 | Petroleum and related products - Determination of the oxidation stability and corrosivity of fire-resistant phosphate ester fluids |
| CEN/TR 14489:2005 | Fire-resistant hydraulic fluids - Classification and specification - Guidelines on selection for the protection of safety, health and the environment |
| EN 14833:2005 | Petroleum and related products - Determination of the hydrolytic stability of fire-resistant phosphate ester fluids |
| ISO/TS 15029-2:2012 | Petroleum and related products Determination of spray ignition characteristics of fire-resistant fluids Part 2: Spray test Stabilized flame heat release method |
| ISO 14935:1998 | Petroleum and related products Determination of wick flame persistence of fire-resistant fluids |
| ISO 6619:1988 | Petroleum products and lubricants — Neutralization number — Potentiometric titration method |
| ISO 760:1978 | Determination of water Karl Fischer method (General method) |
| ISO 3448:1992 | Industrial liquid lubricants — ISO viscosity classification |
| ISO 15029-1:1999 | Petroleum and related products — Determination of spray ignition characteristics of fire-resistant fluids — Part 1: Spray flame persistence — Hollow-cone nozzle method |
| ISO 6743-4:2015 | Lubricants, industrial oils and related products (class L) Classification Part 4: Family H (Hydraulic systems) |
| ISO 7745:2010 | Hydraulic fluid power — Fire-resistant (FR) fluids — Requirements and guidelines for use |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.