EN 717-1:2004
Current
Current
The latest, up-to-date edition.
Wood-based panels - Determination of formaldehyde release - Part 1: Formaldehyde emission by the chamber method
Published date
06-10-2004
Publisher
Sorry this product is not available in your region.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Principle
5 Reagents
5.1 General
5.2 Acetylacetone solution
5.3 Ammonium acetate solution
5.4 Formaldehyde standard solution
6 Apparatus
6.1 Test chamber
6.2 Air sampling system
6.3 Equipment for chemical analysis
6.4 Equipment for verification of air exchange rate
7 Test pieces
8 Procedure
8.1 Test conditions
8.2 Verification of test conditions
8.3 Chamber preparation
8.4 Preparation of test pieces
8.5 Loading and starting procedure
8.6 Air sampling and analysis
8.7 Test duration
9 Determination of formaldehyde emission
9.1 General
9.2 Principle
9.3 Procedure
9.4 Calibration curve
9.5 Calculation of the amount of absorbed formaldehyde
9.6 Calculation of the formaldehyde emission
10 Determination of test result
11 Expression of results
12 Test report
Annex A (normative) Test chambers
Annex B (normative) Determination of air exchange rate
Annex C (normative) Determination of the steady-state
emission value
Annex D (informative) Analytical procedure for the
fluorimetric determination of
formaldehyde content
Bibliography
This European Standard specifies a chamber method with three options of test chambers for the determination of the formaldehyde emission from wood-based panels in terms of the steady-state concentration in a climate chamber under defined conditions, which relate to typical conditions in real-life. This chamber method can also be applied to the estimation of formaldehyde concentrations under various conditions in practice, by the use of mathematical models.
| Committee |
CEN/TC 112
|
| DevelopmentNote |
Supersedes ENV 717-1 (12/2004) Supersedes PREN 717-1. (10/2005)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| DIN EN 717-1:2005-01 | Identical |
| UNE-EN 717-1:2006 | Identical |
| NF EN 717-1 : 2005 | Identical |
| NBN EN 717-1 : 2004 | Identical |
| PN EN 717-1 : 2006 | Identical |
| NEN EN 717-1 : 2004 | Identical |
| SN EN 717-1 : 2004 | Identical |
| UNI EN 717-1 : 2004 | Identical |
| NS EN 717-1 : 1ED 2005 | Identical |
| I.S. EN 717-1:2004 | Identical |
| BS EN 717-1:2004 | Identical |
| PREN 15497 : DRAFT 2011 | STRUCTURAL FINGER JOINTED SOLID TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS |
| ISO 14486:2012 | Laminate floor coverings — Specification |
| ISO 16000-9:2006 | Indoor air — Part 9: Determination of the emission of volatile organic compounds from building products and furnishing — Emission test chamber method |
| PD CEN/TS 16526:2013 | Sandwich boards for furniture (SWB-F). Factory made products. Definition, classification and test methods for determination of performance characteristics |
| PD CEN/TS 16516:2013 | Construction products. Assessment of release of dangerous substances. Determination of emissions into indoor air |
| PREN 14904-1 : DRAFT 2017 | SURFACES FOR SPORTS AREAS - MULTI-SPORTS FLOOR SYSTEMS FOR INDOOR USE - PART 1: ESSENTIAL CHARACTERISTICS |
| DD CEN/TS 15398:2006 | Resilient, textile and laminate floor coverings. Floor covering standard symbols |
| PREN 14342 : DRAFT 2011 | WOOD FLOORING - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| S.R. CEN TR 16098:2010 | CONSTRUCTION PRODUCTS: ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - CONCEPT OF HORIZONTAL TESTING PROCEDURES IN SUPPORT OF REQUIREMENTS UNDER THE CPD |
| S.R. CEN/TS 15398:2016 | RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - FLOOR COVERING STANDARD SYMBOLS - COMPLEMENTARY ELEMENT |
| I.S. EN 16738:2015 | EMISSION SAFETY OF COMBUSTIBLE AIR FRESHENERS - TEST METHODS |
| UNE-EN 16402:2014 | Paints and varnishes - Assessment of emissions of substances from coatings into indoor air - Sampling, conditioning and testing |
| 17/30362165 DC : 0 | BS EN 16402 - PAINTS AND VARNISHES - ASSESSMENT OF EMISSIONS OF SUBSTANCES FROM COATINGS INTO INDOOR AIR - SAMPLING, CONDITIONING AND TESTING |
| I.S. EN 14915:2013 | SOLID WOOD PANELLING AND CLADDING - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| CEN/TS 15398:2016 | Resilient, textile and laminate floor coverings - Floor covering standard symbols - Complementary element |
| EN 14915:2013+A1:2017 | Solid wood panelling and cladding - Characteristics, requirements and marking |
| BS EN 300:2006 | Oriented strand boards (OSB). Definitions, classification and specifications |
| BS EN 14279 : 2004 | LAMINATED VENEER LUMBER (LVL) - DEFINITIONS, CLASSIFICATION AND SPECIFICATIONS |
| BS EN 13698-2:2009 | Pallet production specification Construction specification for 1000 mm x 1200 mm flat wooden pallets |
| BS EN 438-7:2005 | High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates) Compact laminate and HPL composite panels for internal and external wall and ceiling finishes |
| BS EN 15197:2007 | Wood-based panels. Flaxboards. Specifications |
| BS EN 312:2010 | Particleboards. Specifications |
| CEN/TS 16354:2013 | Laminate floor coverings - Underlays - Specification, requirements and test methods |
| DIN EN 14904:2006-06 | Surfaces for sports areas - Indoor surfaces for multi-sports use - Specification |
| EN 12182:2012 | Assistive products for persons with disability - General requirements and test methods |
| CEN/TS 16526:2013 | Sandwich boards for furniture (SWB-F) - Factory made products - Definition, classification and test methods for determination of performance characteristics |
| CEN/TS 16368:2014 | Lightweight Particleboards - Specifications |
| PREN 14915 : DRAFT 2013 | SOLID WOOD PANELLING AND CLADDING - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| 11/30249117 DC : 0 | BS EN 14342 - WOOD FLOORING - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| BS EN 16738:2015 | Emission safety of combustible air fresheners. Test methods |
| I.S. EN ISO 16000-10:2006 | INDOOR AIR - PART 10: DETERMINATION OF THE EMISSION OF VOLATILE ORGANIC COMPOUNDS FROM BUILDING PRODUCTS AND FURNISHING - EMISSION TEST CELL METHOD |
| 10/30234290 DC : 0 | BS EN 636 - PLYWOOD - SPECIFICATIONS |
| BS EN 16402:2013 | Paints and varnishes. Assessment of emissions of substances from coatings into indoor air. Sampling, conditioning and testing |
| PD CEN/TS 15398:2016 | Resilient, textile and laminate floor coverings. Floor covering standard symbols. Complementary element |
| 12/30254092 DC : 0 | BS EN 16368 - LIGHTWEIGHT PARTICLEBOARDS - SPECIFICATIONS |
| BS EN 16516:2017 | Construction products: Assessment of release of dangerous substances. Determination of emissions into indoor air |
| DIN EN 15497:2014-07 | STRUCTURAL FINGER JOINTED SOLID TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS |
| 16/30339855 DC : 0 | BS EN 14041 - RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - ESSENTIAL CHARACTERISTICS |
| 11/30236369 DC : 0 | BS EN 14080 - TIMBER STRUCTURES - GLUED LAMINATED TIMBER AND GLUED SOLID TIMBER |
| 09/30203195 DC : 0 | BS EN 15497 - FINGER JOINTED STRUCTURAL TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS |
| 17/30323851 DC : 0 | BS ISO 19894 - WALKING TROLLEYS - REQUIREMENTS AND TEST METHODS |
| BS EN 16351:2015 | Timber structures. Cross laminated timber. Requirements |
| 02/121752 DC : DRAFT APR 2002 | PREN 438-7 - HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 7: COMPACT LAMINATE AND HPL COMPOSITE PANELS FOR INTERNAL AND EXTERNAL WALL AND CEILING FINISHES |
| PREN 14374 : DRAFT 2016 | TIMBER STRUCTURES - LAMINATED VENEER LUMBER (LVL) - REQUIREMENTS |
| UNI EN 15497 : 2014 | STRUCTURAL FINGER JOINTED SOLID TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS |
| UNI EN 16402 : 2013 | PAINTS AND VARNISHES - ASSESSMENT OF EMISSIONS OF SUBSTANCES FROM COATINGS INTO INDOOR AIR - SAMPLING, CONDITIONING AND TESTING |
| S.R. CEN/TS 16516:2013 | CONSTRUCTION PRODUCTS - ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - DETERMINATION OF EMISSIONS INTO INDOOR AIR |
| I.S. EN ISO 12460-3:2015 | WOOD-BASED PANELS - DETERMINATION OF FORMALDEHYDE RELEASE - PART 3: GAS ANALYSIS METHOD (ISO 12460-3:2015) |
| PREN 16354 : DRAFT 2016 | LAMINATE FLOOR COVERINGS - UNDERLAYS - SPECIFICATION, REQUIREMENTS AND TEST METHODS |
| 16/30333219 DC : 0 | BS EN 16354 - LAMINATE FLOOR COVERINGS - UNDERLAYS - SPECIFICATION, REQUIREMENTS AND TEST METHODS |
| PREN 636 : DRAFT 2010 | PLYWOOD - SPECIFICATIONS |
| DIN EN 12182:2012-07 | Assistive products for persons with disability - General requirements and test methods |
| DIN EN 13986:2015-06 | WOOD-BASED PANELS FOR USE IN CONSTRUCTION - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| DIN EN 14342:2013-09 | Wood flooring - Characteristics, evaluation of conformity and marking |
| DIN EN 14322:2004-06 | WOOD-BASED PANELS - MELAMINE FACED BOARDS FOR INTERIOR USES - DEFINITION, REQUIREMENTS AND CLASSIFICATION |
| UNE-EN 1272:2018 | Child care articles - Table mounted chairs - Safety requirements and test methods |
| UNE-EN 14080:2013 | Timber structures - Glued laminated timber and glued solid timber - Requirements |
| I.S. EN 300:2006 | ORIENTED STRAND BOARDS (OSB) - DEFINITIONS, CLASSIFICATION AND SPECIFICATIONS |
| I.S. EN 636:2012 | PLYWOOD - SPECIFICATIONS |
| I.S. EN 12182:2012 | ASSISTIVE PRODUCTS FOR PERSONS WITH DISABILITY - GENERAL REQUIREMENTS AND TEST METHODS |
| I.S. EN 13986:2004 | WOOD-BASED PANELS FOR USE IN CONSTRUCTION - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| I.S. EN 312:2010 | PARTICLEBOARDS - SPECIFICATIONS |
| I.S. EN 14342:2013 | WOOD FLOORING - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| I.S. EN 13698-2:2009 | PALLET PRODUCTION SPECIFICATION - PART 2: CONSTRUCTION SPECIFICATION FOR 1000 MM X 1200 MM FLAT WOODEN PALLETS |
| I.S. EN 13964:2014 | SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 14279:2005 | LAMINATED VENEER LUMBER (LVL) - DEFINITIONS, CLASSIFICATION AND SPECIFICATIONS |
| I.S. EN 14322:2017 | WOOD-BASED PANELS - MELAMINE FACED BOARDS FOR INTERIOR USES - DEFINITION, REQUIREMENTS AND CLASSIFICATION |
| I.S. EN 1272:2017 | CHILD CARE ARTICLES - TABLE MOUNTED CHAIRS - SAFETY REQUIREMENTS AND TEST METHODS |
| EN 16351:2015 | Timber structures - Cross laminated timber - Requirements |
| 14/30298789 DC : 0 | BS EN 16738 - EMISSION SAFETY OF COMBUSTIBLE AIR FRESHENERS - TEST METHODS |
| 11/30237554 DC : 0 | BS EN 14732 - TIMBER STRUCTURES - PREFABRICATED WALL, FLOOR AND ROOF ELEMENTS - REQUIREMENTS |
| 17/30357045 DC : 0 | BS EN 16232:2013/A1 - CHILD USE AND CARE ARTICLES - INFANT SWINGS |
| DIN EN ISO 12460-3:2016-03 | Wood-based panels - Determination of formaldehyde release - Part 3: Gas analysis method (ISO 12460-3:2015); German version EN ISO 12460-3:2015 |
| BS EN 15497:2014 | Structural finger jointed solid timber. Performance requirements and minimum production requirements |
| 11/30244187 DC : 0 | BS EN 14041 - RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - ESSENTIAL CHARACTERISTICS |
| PD CEN/TS 16368:2014 | Lightweight Particleboards. Specifications |
| PD CEN/TR 16098:2010 | Construction products. Assessment of release of dangerous substances. Concept of horizontal testing procedures in support of requirements under the CPD |
| UNI CEN/TS 16354 : 2014 | LAMINATE FLOOR COVERINGS - UNDERLAYS - SPECIFICATION, REQUIREMENTS AND TEST METHODS |
| PREN 14322 : DRAFT 2014 | WOOD-BASED PANELS - MELAMINE FACED BOARD FOR INTERIOR USES - DEFINITION, REQUIREMENTS AND CLASSIFICATION |
| 15/30329856 DC : 0 | BS EN 14904 - SURFACES FOR SPORTS AREAS - INDOOR SURFACES FOR MULTI-SPORTS USE - SPECIFICATION |
| S.R. CEN/TS 16368:2014 | LIGHTWEIGHT PARTICLEBOARDS - SPECIFICATIONS |
| I.S. EN 14041:2018 | RESILIENT, TEXTILE, LAMINATE AND MODULAR MULTILAYER FLOOR COVERINGS - ESSENTIAL CHARACTERISTICS |
| PREN 438-7 : DRAFT 2014 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 7: COMPACT LAMINATE AND HPL COMPOSITE PANELS FOR INTERNAL AND EXTERNAL WALL AND CEILING FINISHES |
| S.R. CEN/TS 16526:2013 | SANDWICH BOARDS FOR FURNITURE (SWB-F) - FACTORY MADE PRODUCTS - DEFINITION, CLASSIFICATION AND TEST METHODS FOR DETERMINATION OF PERFORMANCE CHARACTERISTICS |
| UNI CEN/TS 16368 : 2014 | LIGHTWEIGHT PARTICLEBOARDS - SPECIFICATIONS |
| UNE-EN 16738:2016 | Emission safety of combustible air fresheners - Test methods |
| EN 16402:2013 | Paints and varnishes - Assessment of emissions of substances from coatings into indoor air - Sampling, conditioning and testing |
| DIN EN 1272:2016-02 (Draft) | CHILD CARE ARTICLES - TABLE MOUNTED CHAIRS - SAFETY REQUIREMENTS AND TEST METHODS |
| DIN EN 438-7:2005-04 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes; German version EN 438-7:2005 |
| DIN EN 636:2015-05 | PLYWOOD - SPECIFICATIONS |
| DIN EN 13964:2014-08 | SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 14080:2013 | TIMBER STRUCTURES - GLUED LAMINATED TIMBER AND GLUED SOLID TIMBER - REQUIREMENTS |
| EN ISO 12460-3:2015 | Wood-based panels - Determination of formaldehyde release - Part 3: Gas analysis method (ISO 12460-3:2015) |
| EN 13986:2004 | Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
| EN 16516:2017 | Construction products: Assessment of release of dangerous substances - Determination of emissions into indoor air |
| EN 13986:2004+A1:2015 | Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
| EN 13964:2014 | Suspended ceilings - Requirements and test methods |
| EN 13698-2:2009 | Pallet production specification - Part 2: Construction specification for 1000 mm x 1200 mm flat wooden pallets |
| EN 15197:2007 | Wood-based panels - Flaxboards - Specifications |
| UNI EN 312 : 2010 | PARTICLEBOARDS - SPECIFICATIONS |
| UNI EN 14342 : 2013 | WOOD FLOORING AND PARQUET - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| UNI EN 14080 : 2013 | TIMBER STRUCTURES - GLUED LAMINATED TIMBER AND GLUED SOLID TIMBER - REQUIREMENTS |
| UNI CEN/TS 16526 : 2014 | SANDWICH BOARDS FOR FURNITURE (SWB-F) - FACTORY MADE PRODUCTS - DEFINITION, CLASSIFICATION AND TEST METHODS FOR DETERMINATION OF PERFORMANCE CHARACTERISTICS |
| UNI EN 13964 : 2014 | SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS |
| UNI EN 12182 : 2012 | ASSISTIVE PRODUCTS FOR PERSONS WITH DISABILITY - GENERAL REQUIREMENTS AND TEST METHODS |
| UNI EN 13698-2 : 2009 | PALLET PRODUCTION SPECIFICATION - PART 2: CONSTRUCTION SPECIFICATION FOR 1000 MM X 1200 MM FLAT WOODEN PALLETS |
| UNI EN 14279 : 2009 | LAMINATED VENEER LUMBER (LVL) - DEFINITIONS, CLASSIFICATION AND SPECIFICATIONS |
| DIN EN 16351:2015-12 | Timber structures - Cross laminated timber - Requirements |
| I.S. EN 15497:2014 | STRUCTURAL FINGER JOINTED SOLID TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS |
| I.S. CEN TS 15398:2006 | RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - FLOOR COVERING STANDARD SYMBOLS |
| 11/30249114 DC : 0 | BS EN 15497 - STRUCTURAL FINGER JOINTED SOLID TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS |
| 09/30202519 DC : 0 | BS EN 312 - PARTICLEBOARDS - SPECIFICATIONS |
| DIN EN 16738:2016-04 | EMISSION SAFETY OF COMBUSTIBLE AIR FRESHENERS - TEST METHODS |
| I.S. EN 16402:2013 | PAINTS AND VARNISHES - ASSESSMENT OF EMISSIONS OF SUBSTANCES FROM COATINGS INTO INDOOR AIR - SAMPLING, CONDITIONING AND TESTING |
| 14/30303732 DC : 0 | BS EN 14322 - WOOD-BASED PANELS - MELAMINE FACED BOARD FOR INTERIOR USES - DEFINITION, REQUIREMENTS AND CLASSIFICATION |
| I.S. EN 16351:2015 | TIMBER STRUCTURES - CROSS LAMINATED TIMBER - REQUIREMENTS |
| 13/30268273 DC : 0 | BS EN 14915 - SOLID WOOD PANELLING AND CLADDING - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| I.S. EN ISO 16000-9:2006 | INDOOR AIR - PART 9: DETERMINATION OF THE EMISSION OF VOLATILE ORGANIC COMPOUNDS FROM BUILDING PRODUCTS AND FURNISHING - EMISSION TEST CHAMBER METHOD |
| 05/30132020 DC : DRAFT APR 2005 | BS EN 15197 - WOOD-BASED PANELS - FLAXBOARDS - SPECIFICATIONS |
| 13/30217369 DC : 0 | BS EN 13964 - SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS |
| 15/30322088 DC : 0 | BS EN 16516 - CONSTRUCTION PRODUCTS - ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - DETERMINATION OF EMISSIONS INTO INDOOR AIR |
| 16/30340580 DC : 0 | BS EN 17009 - FLOORING OF LIGNIFIED MATERIALS OTHER THAN WOOD - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| PREN 14904 : DRAFT 2015 | SURFACES FOR SPORTS AREAS - INDOOR SURFACES FOR MULTI-SPORTS USE - SPECIFICATION |
| 09/30193698 DC : DRAFT JAN 2009 | BS EN 14080 - TIMBER STRUCTURES - GLUED LAMINATED TIMBER AND GLUED LAMINATED SOLID TIMBER - REQUIREMENTS |
| UNI CEN/TS 16516 : 2013 | CONSTRUCTION PRODUCTS - ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - DETERMINATION OF EMISSIONS INTO INDOOR AIR |
| SAE J 2989 : APR 2018 | HANDLING AND PACKAGING OF MATERIALS AND COMPONENTS FOR EMISSIONS TESTING |
| 14/30303797 DC : 0 | BS EN 438-7 - HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 7: COMPACT LAMINATE AND HPL COMPOSITE PANELS FOR INTERNAL AND EXTERNAL WALL AND CEILING FINISHES |
| BS EN ISO 16000-9:2006 | Indoor air Determination of the emission of volatile organic compounds from building products and furnishing. Emission test chamber method |
| PREN 14041 : DRAFT 2016 | RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - ESSENTIAL CHARACTERISTICS |
| PREN 16738 : DRAFT 2014 | EMISSION SAFETY OF COMBUSTIBLE AIR FRESHENERS - TEST METHODS |
| DIN EN 300:2006-09 | ORIENTED STRAND BOARDS (OSB) - DEFINITIONS, CLASSIFICATION AND SPECIFICATIONS |
| DIN EN 13698-2:2009-10 | PALLET PRODUCTION SPECIFICATION - PART 2: CONSTRUCTION SPECIFICATION FOR 1000 MM X 1200 MM FLAT WOODEN PALLETS |
| DIN EN 14080:2013-09 | TIMBER STRUCTURES - GLUED LAMINATED TIMBER AND GLUED SOLID TIMBER - REQUIREMENTS |
| BS EN 14904:2006 | Surfaces for sports areas. Indoor surfaces for multi-sports use. Specification |
| BS EN 14755:2005 | Extruded particleboards. Specifications |
| DIN EN 14904:2015-09 (Draft) | SURFACES FOR SPORTS AREAS - INDOOR SURFACES FOR MULTI-SPORTS USE - SPECIFICATION |
| UNE-EN 16351:2016 | Timber structures - Cross laminated timber - Requirements |
| BS EN 14322:2017 | Wood-based panels. Melamine faced board for interior uses. Definition, requirements and classification |
| UNE-EN 14342:2013 | Wood flooring and parquet - Characteristics, evaluation of conformity and marking |
| BS EN 14342:2013 | Wood flooring and parquet. Characteristics, evaluation of conformity and marking |
| DIN EN 15197:2007-05 | Wood-based panels - Flaxboards - Specifications |
| ISO 12460-3:2015 | Wood-based panels Determination of formaldehyde release Part 3: Gas analysis method |
| BS EN 1272:2017 | Child care articles. Table mounted chairs. Safety requirements and test methods |
| UNE-EN 312:2010 | Particleboards - Specifications |
| UNE-EN ISO 12460-3:2016 | Wood-based panels - Determination of formaldehyde release - Part 3: Gas analysis method (ISO 12460-3:2015) |
| UNE-EN 13698-2:2010 | Pallet production specification - Part 2: Construction specification for 1000 mm x 1200 mm flat wooden pallets |
| ISO 16000-10:2006 | Indoor air — Part 10: Determination of the emission of volatile organic compounds from building products and furnishing — Emission test cell method |
| BS EN 14080:2013 | Timber structures. Glued laminated timber and glued solid timber. Requirements |
| UNE-EN 13986:2006 | Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
| BS EN 12182:2012 | Assistive products for persons with disability. General requirements and test methods |
| EN 14755:2005 | Extruded particleboards - Specifications |
| EN 14904:2006 | Surfaces for sports areas - Indoor surfaces for multi-sports use - Specification |
| EN ISO 16000-10:2006 | Indoor air - Part 10: Determination of the emission of volatile organic compounds from building products and furnishing - Emission test cell method (ISO 16000-10:2006) |
| EN 14080:2013 | Timber structures - Glued laminated timber and glued solid timber - Requirements |
| EN 16738:2015 | Emission safety of combustible air fresheners - Test methods |
| EN 14279:2004+A1:2009 | Laminated Veneer Lumber (LVL) - Definitions, classification and specifications |
| EN 438-7:2005 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes |
| EN 636:2012+A1:2015 | Plywood - Specifications |
| EN 15497:2014 | Structural finger jointed solid timber - Performance requirements and minimum production requirements |
| EN 312:2010 | Particleboards - Specifications |
| EN 300:2006 | Oriented Strand Boards (OSB) - Definitions, classification and specifications |
| EN 14342:2013 | Wood flooring and parquet - Characteristics, evaluation of conformity and marking |
| I.S. EN 438-7:2005 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 7: COMPACT LAMINATE AND HPL COMPOSITE PANELS FOR INTERNAL AND EXTERNAL WALL AND CEILING FINISHES |
| UNE-EN 15497:2014 | Structural finger jointed solid timber - Performance requirements and minimum production requirements |
| BS ISO 14486:2012 | Laminate floor coverings. Specification |
| DIN EN 15497 E : 2014 | STRUCTURAL FINGER JOINTED SOLID TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS |
| 12/30258159 DC : 0 | BS EN 16402 - PAINT AND VARNISHES - ASSESSMENT OF EMISSIONS OF SUBSTANCES FROM COATINGS INTO INDOOR AIR - SAMPLING, CONDITIONING AND TESTING |
| PD CEN/TS 16354:2013 | Laminate floor coverings. Underlays. Specification, requirements and test methods |
| 11/30253102 DC : 0 | BS EN 16351 - TIMBER STRUCTURES - CROSS LAMINATED TIMBER - REQUIREMENTS |
| PREN 13964 : DRAFT 2013 | SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 16516:2017 | CONSTRUCTION PRODUCTS: ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - DETERMINATION OF EMISSIONS INTO INDOOR AIR |
| S.R. CEN/TS 16354:2013 | LAMINATE FLOOR COVERINGS - UNDERLAYS - SPECIFICATION, REQUIREMENTS AND TEST METHODS |
| 14/30295898 DC : 0 | BS EN 14904 - SURFACES FOR SPORTS AREAS - INDOOR SURFACES FOR MULTI-SPORTS USE - SPECIFICATION |
| 17/30353879 DC : 0 | BS EN 17104 - THERMOPLASTICS RIGID PROTECTIVE WALLCOVERING PANELS FOR INTERNAL USE IN BUILDINGS - PERFORMANCE CHARACTERISTICS |
| DIN EN ISO 16000-10:2006-06 | Indoor air - Part 10: Determination of the emission of volatile organic compounds from building products and furnishing - Emission test cell method (ISO 16000-10:2006) |
| UNE-EN 13964:2016 | Suspended ceilings - Requirements and test methods |
| BS EN 636 : 2012 | PLYWOOD - SPECIFICATIONS |
| BS EN ISO 16000-10:2006 | Indoor air Determination of the emission of volatile organic compounds from building products and furnishing. Emission test cell method |
| UNE-EN 14322:2017 | Wood-based panels - Melamine faced board for interior uses - Definition, requirements and classification |
| BS EN 13986 : 2004 | WOOD-BASED PANELS FOR USE IN CONSTRUCTION - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| BS EN 14915 : 2013 | SOLID WOOD PANELLING AND CLADDING - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| BS EN 13964:2014 | Suspended ceilings. Requirements and test methods |
| CEN/TR 16098:2010 | Construction products: Assessment of release of dangerous substances - Concept of horizontal testing procedures in support of requirements under the CPD |
| DIN EN ISO 16000-9:2008-04 | Indoor air - Part 9: Determination of the emission of volatile organic compounds from building products and furnishing - Emission test chamber method (ISO 16000-9:2006) |
| CEN/TS 16516:2013 | Construction products - Assessment of release of dangerous substances - Determination of emissions into indoor air |
| EN 1272:2017 | Child care articles - Table mounted chairs - Safety requirements and test methods |
| DIN EN 14915:2013-12 | SOLID WOOD PANELLING AND CLADDING - CHARACTERISTICS, REQUIREMENTS AND MARKING |
| DIN EN 312:2010-12 | Particleboards - Specifications |
| DIN EN 16402:2014-02 | PAINTS AND VARNISHES - ASSESSMENT OF EMISSIONS OF SUBSTANCES FROM COATINGS INTO INDOOR AIR - SAMPLING, CONDITIONING AND TESTING |
| DIN EN 14279:2009-07 | LAMINATED VENEER LUMBER (LVL) - DEFINITIONS, CLASSIFICATION AND SPECIFICATIONS |
| EN 14322:2017 | Wood-based panels - Melamine faced board for interior uses - Definition, requirements and classification |
| DIN EN 14755:2006-01 | Extruded particleboards - Specifications |
| UNE-EN 14915:2013 | Solid wood panelling and cladding - Characteristics, evaluation of conformity and marking |
| UNE-EN 13986:2006+A1:2015 | Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
| EN 326-1:1994 | Wood-based panels - Sampling, cutting and inspection - Part 1: Sampling and cutting of test pieces and expression of test results |
| ISO 16000-3:2011 | Indoor air — Part 3: Determination of formaldehyde and other carbonyl compounds in indoor air and test chamber air — Active sampling method |
| CR 213:1984 | Particle boards - Determination of formaldehyde emission under specified conditions - Method called: formaldehyde emission method |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.