EN 62776:2015
Current
The latest, up-to-date edition.
Double-capped LED lamps designed to retrofit linear fluorescent lamps - Safety specifications
03-04-2015
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements and general test requirements
5 Marking
6 Interchangeability
7 Pin-safety during insertion
8 Protection against accidental contact with live parts
9 Mechanical requirements for caps
10 Cap temperature rise
11 Resistance to heat
12 Resistance to flame and ignition
13 Fault conditions
14 Creepage distances and clearances
15 Lamp with protection against dust and moisture
16 Photobiological hazard
Annex A (informative) - Conformity testing during
manufacture
Bibliography
Annex ZA (normative) - Normative references to
international publications with their
corresponding European publications
IEC 62776:2014 specifies the safety and interchangeability requirements, and the exchange operation together with the test methods and conditions required to show compliance of double-capped LED lamps with G5 and G13 caps, intended for replacing fluorescent lamps with the same caps, having:- a rated power up to 125 W;- a rated voltage up to 250 V.
| Committee |
CLC/TC 34
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Current
|
| Standards | Relationship |
| BS EN 62776:2015 | Identical |
| VDE 0715-16 : 2015 | Identical |
| PN EN 62776 : 2015 | Identical |
| I.S. EN 62776:2015 | Identical |
| NEN EN IEC 62776 : 2015 | Identical |
| NBN EN 62776 : 2015 | Identical |
| UNE-EN 62776:2015 | Identical |
| CEI EN 62776 : 2015 | Identical |
| NF EN 62776 : 2015 | Identical |
| DIN EN 62776 : 2015 | Identical |
| IEC 60061-3:2005 CSV | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges |
| EN 62031:2008/A2:2015 | LED MODULES FOR GENERAL LIGHTING - SAFETY SPECIFICATIONS (IEC 62031:2008/A2:2014) |
| IEC TR 62778:2014 | Application of IEC 62471 for the assessment of blue light hazard to light sources and luminaires |
| IEC 61347-1:2015 RLV | Lamp controlgear - Part 1: General and safety requirements |
| IEC 60695-2-11:2014 | Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) |
| EN 60921:2004/A1:2006 | BALLASTS FOR TUBULAR FLUORESCENT LAMPS - PERFORMANCE REQUIREMENTS |
| IEC 60921:2004+AMD1:2006 CSV | Ballasts for tubular fluorescent lamps - Performance requirements |
| EN 60360:1998 | Standard method of measurement of lamp cap temperature rise |
| EN 61347-1:2015 | Lamp controlgear - Part 1: General and safety requirements |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| EN 60695-2-10:2013 | Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure |
| IEC 62504:2014 | General lighting - Light emitting diode (LED) products and related equipment - Terms and definitions |
| IEC 60061-4:2005 CSV | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information |
| IEC 60598-1:2014+AMD1:2017 CSV | Luminaires - Part 1: General requirements and tests |
| IEC 60061-1:2005 CSV | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps |
| IEC 62471:2006 | Photobiological safety of lamps and lamp systems |
| EN 60155:1995/A2:2007 | GLOW-STARTERS FOR FLUORESCENT LAMPS |
| ISO 4046-4:2002 | Paper, board, pulps and related terms Vocabulary Part 4: Paper and board grades and converted products |
| IEC 60155:1993 | Glow-starters for fluorescent lamps |
| IEC 60695-2-10:2013 | Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure |
| IEC 61347-2-8:2000+AMD1:2006 CSV | Lamp controlgear - Part 2-8: Particular requirements for ballasts for fluorescent lamps |
| EN 61195:1999/A2:2015 | DOUBLE-CAPPED FLUORESCENT LAMPS - SAFETY SPECIFICATIONS (IEC 61195:1999/A2:2014) |
| IEC 60360:1998 | Standard method of measurement of lamp cap temperature rise |
| EN 60695-2-11:2014 | Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) (IEC 60695-2-11:2014) |
| IEC 61195:1999+AMD1:2012+AMD2:2014 CSV | Double-capped fluorescent lamps - Safety specifications |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.