EN 62391-1:2016/AC:2016-12
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
FIXED ELECTRIC DOUBLE-LAYER CAPACITORS FOR USE IN ELECTRIC AND ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION (IEC 62391-1:2015/COR1:2016)
Amendment of
Superseded date
09-02-2022
Superseded by
Published date
12-01-2013
Sorry this product is not available in your region.
FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
4 General items
5 Tests and measurement
Annex A (normative) - Classification according to
capacitance and internal resistance
Annex B (informative) - Measuring method of capacitance
and low resistance by low frequency a.c. method
(reference)
Annex C (informative) - Thermal equilibrium time of
capacitors
Annex D (informative) - Charging/discharging efficiency and
measurement current
Annex E (informative) - Procedures for setting the
measurement current of capacitor with uncertain
nominal internal resistance
Annex F (informative) - Policy on uncertainty of
measurement and inset limits
Annex G (informative) - Reference to IEC 62391-1:2006
Annex Q (normative) - Quality assessment procedures
Bibliography
Annex ZA (normative) - Normative references to
international publications with their
corresponding European publications
Pertains to fixed electric double-layer capacitors (hereafter referred to as capacitor(s)) mainly used in d.c. circuits of electric and electronic equipment.
| Committee |
TC 40XA
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| IEC 62391-1:2015 | Identical |
| DS EN 62391-1 : 2016 COR 2016 | Identical |
| CEI EN 62391-1 : 2016 | Identical |
| SN EN 62391-1 : 2016 | Identical |
| PN EN 62391-1 : 2016 AC 2017 | Identical |
| UNE-EN 62391-1:2016/AC:2016-12 | Identical |
| DIN EN 62391-1:2016-09 | Identical |
| NEN EN IEC 62391-1 : 2016 C1 2017 | Identical |
| NBN EN 62391-1 : 2016 | Identical |
| NF EN 62391-1 : 2018 | Identical |
| I.S. EN 62391-1:2016 | Identical |
| BS EN 61881-3 : 2012 | RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - CAPACITORS FOR POWER ELECTRONICS - PART 3: ELECTRIC DOUBLE-LAYER CAPACITORS |
| EN 62813:2015 | Lithium ion capacitors for use in electric and electronic equipment - Test methods for electrical characteristics |
| EN 62391-2-1:2006 | Fixed electric double-layer capacitors for use in electronic equipment - Part 2-1: Blank detail specification - Electric-double layer capacitors for power application - Assessment level EZ |
| I.S. EN 61881-3:2012 | RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - CAPACITORS FOR POWER ELECTRONICS - PART 3: ELECTRIC DOUBLE-LAYER CAPACITORS (IEC 61881-3:2012 (EQV)) |
| BS EN 62391-2:2006 | Fixed electric double-layer capacitors for use in electronic equipment Sectional specification. Electric double-layer capacitors for power application |
| BS EN 62576:2010 | Electric double-layer capacitors for use in hybrid electric vehicles. Test methods for electrical characteristics |
| BS EN 62813:2015 | Lithium ion capacitors for use in electric and electronic equipment. Test methods for electrical characteristics |
| BS EN 62391-2-1:2006 | Fixed electric double-layer capacitors for use in electronic equipment Blank detail specification. Electric double-layer capacitors for power application. Assessment level EZ |
| I.S. EN 62391-2-1:2006 | FIXED ELECTRIC DOUBLE-LAYER CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2-1: BLANK DETAIL SPECIFICATION - ELECTRIC-DOUBLE LAYER CAPACITORS FOR POWER APPLICATION - ASSESSMENT LEVEL EZ |
| CEI EN 62391-2 : 2006 | FIXED ELECTRIC DOUBLE-LAYER CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION - ELECTRIC DOUBLE-LAYER CAPACITORS FOR POWER APPLICATION |
| I.S. EN 62391-2:2006 | FIXED ELECTRIC DOUBLE-LAYER CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION - ELECTRIC DOUBLE-LAYER CAPACITORS FOR POWER APPLICATION |
| I.S. EN 62391-1:2016 | FIXED ELECTRIC DOUBLE-LAYER CAPACITORS FOR USE IN ELECTRIC AND ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION |
| EN 62576:2010 | Electric double-layer capacitors for use in hybrid electric vehicles - Test methods for electrical characteristics |
| EN 62391-2:2006 | Fixed electric double-layer capacitors for use in electronic equipment - Part 2: Sectional specification - Electric double-layer capacitors for power application |
| EN 61881-3:2012/A1:2013 | RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - CAPACITORS FOR POWER ELECTRONICS - PART 3: ELECTRIC DOUBLE-LAYER CAPACITORS (IEC 61881-3:2012/A1:2013) |
| IEC 62391-2:2006 | Fixed electric double-layer capacitors for use in electronic equipment - Part 2: Sectional specfication - Electric double layer capacitors for power application |
| IEC 61193-2:2007 | Quality assessment systems - Part 2: Selection and use of sampling plans for inspection of electronic components and packages |
| EN 60294:2012 | Measurement of the dimensions of a cylindrical component with axial terminations |
| EN ISO 80000-1:2013 | Quantities and units - Part 1: General (ISO 80000-1:2009 + Cor 1:2011) |
| IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
| EN 62391-2:2006 | Fixed electric double-layer capacitors for use in electronic equipment - Part 2: Sectional specification - Electric double-layer capacitors for power application |
| IEC 60068-2-58:2015+AMD1:2017 CSV | Environmental testing - Part 2-58: Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD) |
| IEC 60068-2-20:2008 | Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads |
| EN 60068-2-20:2008 | Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads |
| EN 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
| EN 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
| IEC 60068-2-21:2006 | Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices |
| EN 60068-1:2014 | Environmental testing - Part 1: General and guidance |
| IEC 62391-2-1:2006 | Fixed electric double-layer capacitors for use in electronic equipment - Part 2-1: Blank detail specification - Electric double-layer capacitors for power application - Assessment level EZ |
| IEC 60384-1:2016 | Fixed capacitors for use in electronic equipment - Part 1: Generic specification |
| EN 62576:2010 | Electric double-layer capacitors for use in hybrid electric vehicles - Test methods for electrical characteristics |
| EN 61881-3:2012/A1:2013 | RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - CAPACITORS FOR POWER ELECTRONICS - PART 3: ELECTRIC DOUBLE-LAYER CAPACITORS (IEC 61881-3:2012/A1:2013) |
| EN 60717:2012 | Method for the determination of the space required by capacitors and resistors with unidirectional terminations |
| IEC 62576:2009 | Electric double-layer capacitors for use in hybrid electric vehicles - Test methods for electrical characteristics |
| IEC 60068-2-47:2005 | Environmental testing - Part 2-47: Test - Mounting of specimens for vibration, impact and similar dynamic tests |
| EN 62391-2-1:2006 | Fixed electric double-layer capacitors for use in electronic equipment - Part 2-1: Blank detail specification - Electric-double layer capacitors for power application - Assessment level EZ |
| IEC 60294:2012 | Measurement of the dimensions of a cylindrical component with axial terminations |
| IEC 60068-2-54:2006 | Environmental testing - Part 2-54: Tests - Test Ta: Solderability testing of electronic components by the wetting balance method |
| EN 61193-2 : 2007 | QUALITY ASSESSMENT SYSTEMS - PART 2: SELECTION AND USE OF SAMPLING PLANS FOR INSPECTION OF ELECTRONIC COMPONENTS AND PACKAGES |
| EN 60068-2-21:2006 | Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices |
| IEC 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
| IEC 60062:2016 | Marking codes for resistors and capacitors |
| EN 60062:2016/AC:2016-12 | MARKING CODES FOR RESISTORS AND CAPACITORS (IEC 60062:2016/COR1:2016) |
| ISO 80000-1:2009 | Quantities and units — Part 1: General |
| EN 60063:2015 | Preferred number series for resistors and capacitors |
| EN 60068-2-78:2013 | Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state |
| EN 60068-2-6:2008 | Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal) |
| IEC 60063:2015 | Preferred number series for resistors and capacitors |
| IEC 60717:2012 | Method for the determination of the space required by capacitors and resistors with unidirectional terminations |
| EN 60068-2-54:2006 | Environmental testing - Part 2-54: Tests - Test Ta: Solderability testing of electronic components by the wetting balance method |
| IEC 61881-3:2012+AMD1:2013 CSV | Railway applications - Rolling stock equipment - Capacitors forpower electronics - Part 3: Electric double-layer capacitors |
| EN 60384-1:2016 | Fixed capacitors for use in electronic equipment - Part 1: Generic specification |
| IEC 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
| EN 60695-11-5:2017 | Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance |
| IEC 60695-11-5:2016 | Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance |
| IEC 60068-2-14:2009 | Environmental testing - Part 2-14: Tests - Test N: Change of temperature |
| EN 60068-2-45:1992/A1:1993 | Environmental testing - Part 2: Tests - Test Xa and guidance: Immersion in cleaning solvents |
| EN 60068-2-14:2009 | Environmental testing - Part 2-14: Tests - Test N: Change of temperature |
| IEC 60068-2-69:2017 | Environmental testing - Part 2-69: Tests - Test Te/Tc: Solderability testing of electronic components and printed boards by the wetting balance (force measurement) method |
| EN 60068-2-47:2005 | Environmental testing - Part 2-47: Tests - Mounting of specimens for vibration, impact and similar dynamic tests |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.