EN 61676:2002/A1:2009
Current
The latest, up-to-date edition.
MEDICAL ELECTRICAL EQUIPMENT - DOSIMETRIC INSTRUMENTS USED FOR NON-INVASIVE MEASUREMENT OF X-RAY TUBE VOLTAGE IN DIAGNOSTIC RADIOLOGY
02-04-2009
INTRODUCTION
1 Scope and object
2 Normative references
3 Terminology and definitions
4 General performance requirements for measurement of
PRACTICAL PEAK VOLTAGE measurements
5 Special instrumental requirements and marking
6 ACCOMPANYING DOCUMENTS
Annex A (informative) - Recommended performance criteria
for the invasive divider
Annex B (informative) - Additional information on PRACTICAL
PEAK VOLTAGE
Annex C (informative) - Glossary of defined terms
Annex ZA (normative) - Normative references to international
publications with their corresponding
European publications
Defines the performance requirements of instruments as used in the NON-INVASIVE MEASUREMENT OF X-RAY TUBE VOLTAGE up to 150 kV and the relevant compliance tests.
| Committee |
TC 62
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Current
|
| Standards | Relationship |
| DS EN 61676 : 2003 AMD 1 2009 | Identical |
| NBN EN 61676 : 2003 AMD 1 2009 | Identical |
| NEN EN IEC 61676 : 2003 AMD 1 2009 | Identical |
| UNE-EN 61676:2003 | Identical |
| IEC 61676:2002/AMD1:2008 | Identical |
| PN EN 61676 : 2003 AMD 1 2009 | Identical |
| IEC 61676:2002+AMD1:2008 CSV | Identical |
| DIN EN 61676:2010-05 | Identical |
| NF EN 61676 : 2006 AMD 1 2009 | Identical |
| BS EN 61676 : 2002 | Identical |
| SN EN 61676 : 2002 | Identical |
| CEI EN 61676/A1:2010 | Identical |
| I.S. EN 61676:2003 | Identical |
| BS EN 61676:2002+A1:2009 | Identical |
| BS EN IEC 60534-1:2023 | Identical |
| BS EN 62467-1:2015 | Medical electrical equipment. Dosimetric instruments as used in brachytherapy Instruments based on well-type ionization chambers |
| EN 62467-1:2015 | Medical electrical equipment - Dosimetric instruments as used in brachytherapy - Part 1: Instruments based on well-type ionization chambers |
| CEI EN 60731 : 2012 | MEDICAL ELECTRICAL EQUIPMENT - DOSIMETERS WITH IONIZATION CHAMBERS AS USED IN RADIOTHERAPY |
| BS EN 60731:2012 | Medical electrical equipment. Dosimeters with ionization chambers as used in radiotherapy |
| I.S. EN 61223-3-2:2008 | EVALUATION AND ROUTINE TESTING IN MEDICAL IMAGING DEPARTMENTS - PART 3-2: ACCEPTANCE TESTS - IMAGING PERFORMANCE OF MAMMOGRAPHIC X-RAY EQUIPMENT |
| I.S. EN 60731:2012 | MEDICAL ELECTRICAL EQUIPMENT - DOSIMETERS WITH IONIZATION CHAMBERS AS USED IN RADIOTHERAPY (IEC 60731:2011 (EQV)) |
| BS EN 61223-3-2:2008 | Evaluation and routine testing in medical imaging departments Acceptance tests. Imaging performance of mammographic X-ray equipment |
| EN 61223-3-2:2008 | Evaluation and routine testing in medical imaging departments - Part 3-2: Acceptance tests - Imaging performance of mammographic X-ray equipment |
| EN 60731:2012 | Medical electrical equipment - Dosimeters with ionization chambers as used in radiotherapy |
| EN 61000-4-11:2004/A1:2017 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-11: TESTING AND MEASUREMENT TECHNIQUES - VOLTAGE DIPS, SHORT INTERRUPTIONS AND VOLTAGE VARIATIONS IMMUNITY TESTS (IEC 61000-4-11:2004/A1:2017) |
| IEC 61187:1993 | Electrical and electronic measuring equipment - Documentation |
| IEC 61000-4-11:2004+AMD1:2017 CSV | Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests |
| IEC TR 60788:2004 | Medical electrical equipment - Glossary of defined terms |
| IEC 61000-4-4:2012 RLV | Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test |
| EN 61000-4-2:2009 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
| IEC 61000-4-6:2013 | Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
| EN 61000-4-3 : 2006 AMD 2 2010 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-3: TESTING AND MEASUREMENT TECHNIQUES - RADIATED, RADIO-FREQUENCY, ELECTROMAGNETIC FIELD IMMUNITY TEST |
| ISO/IEC Guide 99:2007 | International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
| IEC 61000-4-2:2008 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
| IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV | Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
| EN 61187:1994/corrigendum:1995 | ELECTRICAL AND ELECTRONIC MEASURING EQUIPMENT - DOCUMENTATION |
| EN 61000-4-4:2012 | Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test |
| EN 61000-4-6:2014/AC:2015 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS (IEC 61000-4-6:2013) |
| EN 61010-1:2010 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements |
| ISO 7000:2014 | Graphical symbols for use on equipment — Registered symbols |
| IEC 61010-1:2010+AMD1:2016 CSV | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Logging out.