EN 61249-2-8:2003
Current
The latest, up-to-date edition.
Materials for printed boards and other interconnecting structures - Part 2-8: Reinforced base materials, clad and unclad - Modified brominated epoxide woven fibreglass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad
09-05-2003
1 Scope
2 Normative references
3 Materials and construction
3.1 Resin system
3.2 Reinforcement
3.3 Metal foil
4 Internal marking
5 Electrical properties
6 Non-electrical properties of the copper-clad
laminate
6.1 Appearance of the copper-clad sheet
6.2 Appearance of the unclad face
6.3 Laminate thickness
6.4 Bow and twist
6.5 Properties related to the copper foil bond
6.6 Punching and machining
6.7 Dimensional stability
6.8 Sheet sizes
6.9 Cut panels
7 Non-electrical properties of the base material
after complete removal of the copper foil
7.1 Appearance of the dielectric base material
7.2 Flexural strength
7.3 Flammability
7.4 Water absorption
7.5 Measling
7.6 Glass transition temperature and cure factor
8 Quality assurance
8.1 Quality system
8.2 Responsibility for inspection
8.3 Qualification inspection
8.4 Quality conformance inspection
8.5 Certificate of conformance
8.6 Safety data sheet
9 Packaging and marking
10 Ordering information
Annex A (informative) Engineering information
Annex B (informative) Common laminate constructions
Annex C (informative) Guideline for qualification and
conformance inspection
Annex ZA (normative) Normative references to international
publications with their corresponding European publications
Bibliography
Gives requirements for properties of modified brominated epoxide woven E-glass reinforced laminate sheets of defined flammability, copper-clad in thicknesses of 0,05 mm up to 3,2 mm. The flammability rating is achieved through the use of brominated fire retardants reacted as part of the epoxide polymeric structure.
| Committee |
CLC/SR 91
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Current
|
| Standards | Relationship |
| DIN EN 61249-2-8:2004-01 | Identical |
| SN EN 61249-2-8 : 2003 | Identical |
| UNE-EN 61249-2-8:2004 | Identical |
| NEN EN IEC 61249-2-8 : 2003 | Identical |
| PN EN 61249-2-8 : 2004 | Identical |
| NF EN 61249-2-8 : 2004 | Identical |
| BS EN 61249-2-8:2003 | Identical |
| CEI EN 61249-2-8 : 2004 | Identical |
| NBN EN 61249 2-8 : 2004 | Identical |
| I.S. EN 61249-2-8:2003 | Identical |
| IEC 61249-2-8:2003 | Identical |
| EN 61249-4-15 : 2009 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-15: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD (FOR THE MANUFACTURE OF MULTILAYER BOARDS) - MULTIFUNCTIONAL EPOXIDE WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST) FOR LEAD-FREE ASSEMBLY |
| EN 61249-4-2:2005 | Materials for printed boards and other interconnecting structures - Part 4-2: Sectional specification set for prepreg materials, unclad - Multifunctional epoxide woven E-glass prepreg of defined flammability |
| EN 61249-4-16:2009 | Materials for printed boards and other interconnecting structures - Part 4-16: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Multifunctional non-halogenated epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly |
| BS EN 61249-4-16:2009 | Materials for printed boards and other interconnecting structures Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards). Multifunctional non-halogenated epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly |
| CEI EN 61249-4-2 : 2006 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES PART 4-2: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD - MULTIFUNCTIONAL EPOXIDE WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY |
| BS EN 61249-4-15:2009 | Materials for printed boards and other interconnecting structures Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards). Multifunctional epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly |
| BS EN 61249-4-17:2009 | Materials for printed boards and other interconnecting structures Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards). Non-halogenated epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly |
| BS EN 62137-4:2014 | Electronics assembly technology Endurance test methods for solder joint of area array type package surface mount devices |
| BS EN 61249-4-2:2005 | Materials for printed boards and other interconnecting structures Sectional specification set for prepreg materials, unclad. Multifunctional expoxide woven E-glass prepeg of defined flammability |
| I.S. EN 62137-4:2014 | ELECTRONICS ASSEMBLY TECHNOLOGY - PART 4: ENDURANCE TEST METHODS FOR SOLDER JOINT OF AREA ARRAY TYPE PACKAGE SURFACE MOUNT DEVICES |
| BS EN 61249-4-14:2009 | Materials for printed boards and other interconnecting structures Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) Epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly |
| I.S. EN 61249-4-2:2005 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-2: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD - MULTIFUNCTIONAL EPOXIDE WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY |
| EN 62137-4:2014/AC:2015 | ELECTRONICS ASSEMBLY TECHNOLOGY - PART 4: ENDURANCE TEST METHODS FOR SOLDER JOINT OF AREA ARRAY TYPE PACKAGE SURFACE MOUNT DEVICES (IEC 62137-4:2014) |
| EN 61249-4-17:2009 | Materials for printed boards and other interconnecting structures - Part 4-17: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Non-halogenated epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly |
| EN 61249-4-14 : 2009 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-14: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD (FOR THE MANUFACTURE OF MULTILAYER BOARDS) - EPOXIDE WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST) FOR LEAD-FREE ASSEMBLY |
| EN 61249-5-1:1996 | Materials for interconnection structures - Part 5: Sectional specification set for conductive foils and films with or without coatings - Section 1: Copper foils (for the manufacture of copper-clad base materials) |
| ISO 11014-1:1994 | Safety data sheet for chemical products Part 1: Content and order of sections |
| IEC 61249-5-1:1995 | Materials for interconnection structures - Part 5: Sectional specification set for conductive foils and films with and without coatings - Section 1: Copper foils (for the manufacture of copper-clad base materials) |
| ISO 14001:2015 | Environmental management systems — Requirements with guidance for use |
| IEC 60194:2015 | Printed board design, manufacture and assembly - Terms and definitions |
| EN ISO 14001:2015 | Environmental management systems - Requirements with guidance for use (ISO 14001:2015) |
| ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
| IEC 61189-2:2006 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2: Test methods for materials for interconnection structures |
| EN ISO 9000:2015 | Quality management systems - Fundamentals and vocabulary (ISO 9000:2015) |
| EN 61189-2:2006 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2: Test methods for materials for interconnection structures |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.