EN 61190-1-2:2014
Current
The latest, up-to-date edition.
Attachment materials for electronic assembly - Part 1-2: Requirements for soldering pastes for high-quality interconnects in electronics assembly
23-05-2014
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Standardized description for products
5 Test methods
6 Requirements
7 Quality assurance provisions
8 Preparation for delivery
9 Additional information - Performance and shelf life
extension inspections
Annex A (normative) - Test report on solder paste
Annex B (informative) - Reflow condition and profile
Annex C (informative) - Typical comparison of particle
size distributions between laser diffraction
method and screen method
Bibliography
Annex ZA (normative) - Normative references to international
publications with their corresponding
European publications
IEC 61190-1-2:2014-02(en-fr) specifies general requirements for the characterization and testing of solder pastes used to make high-quality electronic interconnections in electronics assembly. This standard serves as a quality control document and is not intended to relate directly to the material's performance in the manufacturing process. This edition includes the following significant technical changes with respect to the previous edition: a) modification of the solder powder size in Table 2; b) addition of the information of 'Reflow condition and profile' in Annex B; c) addition of a new Annex C.
Committee |
CLC/SR 91
|
DocumentType |
Standard
|
PublisherName |
European Committee for Standards - Electrical
|
Status |
Current
|
Standards | Relationship |
BS EN 61190-1-2:2014 | Identical |
I.S. EN 61190-1-2:2014 | Identical |
NF EN 61190-1-2 : 2014 | Identical |
IEC 61190-1-2:2014 | Identical |
SN EN 61190-1-2:2014 | Identical |
DIN EN 61190-1-2:2014-11 | Identical |
NEN EN IEC 61190-1-2 : 2014 | Identical |
NBN EN 61190 1-2 : 2014 | Identical |
CEI EN 61190-1-2 : 2015 | Identical |
UNE-EN 61190-1-2:2014 | Identical |
PN EN 61190-1-2 : 2014 | Identical |
PNE-EN 61190-1-2:2007/FprA1 | Identical |
CEI EN 62137-1-4 : 2010 | SURFACE MOUNTING TECHNOLOGY - ENVIRONMENTAL AND ENDURANCE TEST METHODS FOR SURFACE MOUNT SOLDER JOINT - PART 1-4: CYCLIC BENDING TEST |
I.S. EN 62137-1-5:2009 | SURFACE MOUNTING TECHNOLOGY - ENVIRONMENTAL AND ENDURANCE TEST METHODS FOR SURFACE MOUNT SOLDER JOINTS - PART 1-5: MECHANICAL SHEAR FATIGUE TEST |
BS EN 62137-4:2014 | Electronics assembly technology Endurance test methods for solder joint of area array type package surface mount devices |
CEI EN 60068-2-21 : 2006 | ENVIRONMENTAL TESTING - PART 2-21: TESTS - TEST U: ROBUSTNESS OF TERMINATIONS AND INTEGRAL MOUNTING DEVICES |
I.S. EN 60749-21:2011 | SEMICONDUCTOR DEVICES - MECHANICAL AND CLIMATIC TEST METHODS - PART 21: SOLDERABILITY |
EN 60068-2-21:2006 | Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices |
BS EN 61191-1:2013 | Printed board assemblies Generic specification. Requirements for soldered electrical and electronic assemblies using surface mount and related assembly technologies |
EN 62137-1-2:2007 | Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-2: Shear strength test |
EN 60749-21:2011 | SEMICONDUCTOR DEVICES - MECHANICAL AND CLIMATIC TEST METHODS - PART 21: SOLDERABILITY |
EN 62137-1-4:2009 | Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-4: Cyclic bending test |
EN 62137-1-3:2009 | Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-3: Cyclic drop test |
EN 62137-1-5:2009 | Surface mounting technology - Environmental and endurance test methods for surface mount solder joints - Part 1-5: Mechanical shear fatigue test |
EN 62137:2004/corrigendum:2005 | ENVIRONMENTAL AND ENDURANCE TESTING - TEST METHODS FOR SURFACE-MOUNT BOARDS OF AREA ARRAY TYPE PACKAGES FBGA, BGA, FLGA, LGA, SON AND QFN |
EN 62878-1-1:2015 | Device embedded substrate - Part 1-1: Generic specification - Test methods |
I.S. EN 61191-1:2013 | PRINTED BOARD ASSEMBLIES - PART 1: GENERIC SPECIFICATION - REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES USING SURFACE MOUNT AND RELATED ASSEMBLY TECHNOLOGIES (IEC 61191-1:2013 (EQV)) |
EN 61189-5-3:2015 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-3: General test methods for materials and assemblies - Soldering paste for printed board assemblies |
CEI EN 62137-1-5 : 2010 | SURFACE MOUNTING TECHNOLOGY - ENVIRONMENTAL AND ENDURANCE TEST METHODS FOR SURFACE MOUNT SOLDER JOINT - PART 1-5: MECHANICAL SHEAR FATIGUE TEST |
CEI EN 61189-5-3 : 2016 | TEST METHODS FOR ELECTRICAL MATERIALS, PRINTED BOARDS AND OTHER INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 5-3: GENERAL TEST METHODS FOR MATERIALS AND ASSEMBLIES - SOLDERING PASTE FOR PRINTED BOARD ASSEMBLIES |
BS EN 62137-1-5:2009 | Surface mounting technology. Environmental and endurance test methods for surface mount solder joints Mechanical shear fatigue test |
BS EN 62137-1-1:2007 | Surface mounting technology. Environmental and endurance test methods for surface mount solder joint Pull strength test |
CEI EN 60749-21 : 2012 | SEMICONDUCTOR DEVICES - MECHANICAL AND CLIMATIC TEST METHODS - PART 21: SOLDERABILITY |
CEI EN 60068-2-58 : 2016 | ENVIRONMENTAL TESTING - PART 2-58: TESTS - TEST TD: TEST METHODS FOR SOLDERABILITY, RESISTANCE TO DISSOLUTION OF METALLIZATION AND TO SOLDERING HEAT OF SURFACE MOUNTING DEVICES (SMD) |
I.S. EN 61192-5:2007 | WORKMANSHIP REQUIREMENTS FOR SOLDERED ELECTRONIC ASSEMBLIES - PART 5: REWORK, MODIFICATION AND REPAIR OF SOLDERED ELECTRONIC ASSEMBLIES |
I.S. EN IEC 61190-1-3:2018 | ATTACHMENT MATERIALS FOR ELECTRONIC ASSEMBLY - PART 1-3: REQUIREMENTS FOR ELECTRONIC GRADE SOLDER ALLOYS AND FLUXED AND NON-FLUXED SOLID SOLDER FOR ELECTRONIC SOLDERING APPLICATIONS |
I.S. EN 61190-1-3:2007 | ATTACHMENT MATERIALS FOR ELECTRONIC ASSEMBLY - PART 1-3: REQUIREMENTS FOR ELECTRONIC GRADE SOLDER ALLOYS AND FLUXED AND NON-FLUXED SOLID SOLDERS FOR ELECTRONIC SOLDERING APPLICATIONS |
BS EN 62137:2004 | Environmental and endurance testing. Test methods for surface-mount boards of area array type packages FBGA, BGA, FLGA, LGA, SON and QFN |
BS EN 62137-1-3:2009 | Surface mounting technology. Environmental and endurance test methods for surface mount solder joint Cyclic drop test |
BS EN 61189-5-3:2015 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies General test methods for materials and assemblies. Soldering paste for printed board assemblies |
BS EN 62878-1-1:2015 | Device embedded substrate Generic specification. Test methods |
BS EN 62137-1-2:2007 | Surface mounting technology. Environmental and endurance test methods for surface mount solder joint Shear strength test |
BS EN 61190-1-3 : 2007 | ATTACHMENT MATERIALS FOR ELECTRONIC ASSEMBLY - PART 1-3: REQUIREMENTS FOR ELECTRONIC GRADE SOLDER ALLOYS AND FLUXED AND NON-FLUXED SOLID SOLDERS FOR ELECTRONIC SOLDERING APPLICATIONS |
I.S. EN 61189-5:2006 | TEST METHODS FOR ELECTRICAL MATERIALS, INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 5: TEST METHODS FOR PRINTED BOARD ASSEMBLIES |
I.S. EN 62137-1-2:2007 | SURFACE MOUNTING TECHNOLOGY - ENVIRONMENTAL AND ENDURANCE TEST METHODS FOR SURFACE MOUNT SOLDER JOINT - PART 1-2: SHEAR STRENGTH TEST |
I.S. EN 61189-3:2008 | TEST METHODS FOR ELECTRICAL MATERIALS, PRINTED BOARDS AND OTHER INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 3: TEST METHODS FOR INTERCONNECTION STRUCTURES (PRINTED BOARDS) |
I.S. EN 60068-2-21:2006 | ENVIRONMENTAL TESTING - PART 2-21: TESTS - TEST U: ROBUSTNESS OF TERMINATIONS AND INTEGRAL MOUNTING DEVICES |
BS EN 61189-5:2006 | Test methods for electrical materials, interconnection structures and assemblies Test methods for printed board assemblies |
I.S. EN 62025-2:2005 | HIGH FREQUENCY INDUCTIVE COMPONENTS - NON-ELECTRICAL CHARACTERISTICS AND MEASURING METHODS - PART 2: TEST METHODS FOR NON-ELECTRICAL CHARACTERISTICS |
BS EN 62025-2:2005 | High frequency inductive components. Non-electrical characteristics and measuring methods Test methods for non-electrical characteristics |
BS EN 62137-1-4:2009 | Surface mounting technology. Environmental and endurance test methods for surface mount solder joint Cyclic bending test |
I.S. EN 62137-1-1:2007 | SURFACE MOUNTING TECHNOLOGY - ENVIRONMENTAL AND ENDURANCE TEST METHODS FOR SURFACE MOUNT SOLDER JOINT - PART 1-1: PULL STRENGTH TEST |
CEI EN 62137-1-1 : 2008 | SURFACE MOUNTING TECHNOLOGY - ENVIRONMENTAL AND ENDURANCE TEST METHODS FOR SURFACE MOUNT SOLDER JOINT - PART 1-1: PULL STRENGTH TEST |
I.S. EN 62137-1-3:2009 | SURFACE MOUNTING TECHNOLOGY - ENVIRONMENTAL AND ENDURANCE TEST METHODS FOR SURFACE MOUNT SOLDER JOINT - PART 1-3: CYCLIC DROP TEST |
I.S. EN 62137:2005 | ENVIRONMENTAL AND ENDURANCE TESTING - TEST METHODS FOR SURFACE-MOUNT BOARDS OF AREA ARRAY TYPE PACKAGES FBGA, BGA, FLGA, LGA, SON AND QFN |
EN 62137-1-1 : 2007 | SURFACE MOUNTING TECHNOLOGY - ENVIRONMENTAL AND ENDURANCE TEST METHODS FOR SURFACE MOUNT SOLDER JOINT - PART 1-1: PULL STRENGTH TEST |
BS EN 60068-2-58 : 2015 | ENVIRONMENTAL TESTING - PART 2-58: TESTS - TEST TD: TEST METHODS FOR SOLDERABILITY, RESISTANCE TO DISSOLUTION OF METALLIZATION AND TO SOLDERING HEAT OF SURFACE MOUNTING DEVICES (SMD) |
BS EN 61189-3:2008 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies Test methods for interconnection structures (printed boards) |
BS EN 61192-5:2007 | Workmanship requirements for soldered electric assemblies Rework, modification and repair of soldered electronic assemblies |
CEI EN 62137-1-3 : 2009 | SURFACE MOUNTING TECHNOLOGY - ENVIRONMENTAL AND ENDURANCE TEST METHODS FOR SURFACE MOUNT SOLDER JOINT - PART 1-3: CYCLIC DROP TEST |
CEI EN 62137-1-2 : 2008 | SURFACE MOUNTING TECHNOLOGY - ENVIRONMENTAL AND ENDURANCE TEST METHODS FOR SURFACE MOUNT SOLDER JOINT - PART 1-2: SHEAR STRENGTH TEST |
BS EN 60749-21:2011 | Semiconductor devices. Mechanical and climatic test methods Solderability |
EN IEC 61190-1-3:2018 | Attachment materials for electronic assembly - Part 1-3: Requirements for electronic grade solder alloys and fluxed and non-fluxed solid solder for electronic soldering applications |
I.S. EN 61189-5-3:2015 | TEST METHODS FOR ELECTRICAL MATERIALS, PRINTED BOARDS AND OTHER INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 5-3: GENERAL TEST METHODS FOR MATERIALS AND ASSEMBLIES - SOLDERING PASTE FOR PRINTED BOARD ASSEMBLIES |
I.S. EN 62137-1-4:2009 | SURFACE MOUNTING TECHNOLOGY - ENVIRONMENTAL AND ENDURANCE TEST METHODS FOR SURFACE MOUNT SOLDER JOINT - PART 1-4: CYCLIC BENDING TEST |
BS EN 60068-2-21:2006 | Environmental testing Tests. Test U: Robustness of terminations and integral mounting devices |
I.S. EN 60068-2-58:2015 | ENVIRONMENTAL TESTING - PART 2-58: TESTS - TEST TD: TEST METHODS FOR SOLDERABILITY, RESISTANCE TO DISSOLUTION OF METALLIZATION AND TO SOLDERING HEAT OF SURFACE MOUNTING DEVICES (SMD) |
EN 61192-5 : 2007 | WORKMANSHIP REQUIREMENTS FOR SOLDERED ELECTRONIC ASSEMBLIES - PART 5: REWORK, MODIFICATION AND REPAIR OF SOLDERED ELECTRONIC ASSEMBLIES |
EN 61191-1:2013 | PRINTED BOARD ASSEMBLIES - PART 1: GENERIC SPECIFICATION - REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES USING SURFACE MOUNT AND RELATED ASSEMBLY TECHNOLOGIES (IEC 61191-1:2013) |
EN 62137-4:2014/AC:2015 | ELECTRONICS ASSEMBLY TECHNOLOGY - PART 4: ENDURANCE TEST METHODS FOR SOLDER JOINT OF AREA ARRAY TYPE PACKAGE SURFACE MOUNT DEVICES (IEC 62137-4:2014) |
OVE/ONORM EN 62025-2 : 2005 | HIGH FREQUENCY INDUCTIVE COMPONENTS - NON-ELECTRICAL CHARACTERISTICS AND MEASURING METHODS - PART 2: TEST METHODS FOR NON-ELECTRICAL CHARACTERISTICS |
EN 61189-5 : 2006 | TEST METHODS FOR ELECTRICAL MATERIALS, INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 5: TEST METHODS FOR PRINTED BOARD ASSEMBLIES |
EN 60068-2-58:2015/A1:2018 | ENVIRONMENTAL TESTING - PART 2-58: TESTS - TEST TD: TEST METHODS FOR SOLDERABILITY, RESISTANCE TO DISSOLUTION OF METALLIZATION AND TO SOLDERING HEAT OF SURFACE MOUNTING DEVICES (SMD) (IEC 60068-2-58:2015/A1:2017) |
EN 62025-2:2005 | High frequency inductive components - Non-electrical characteristics and measuring methods - Part 2: Test methods for non-electrical characteristics |
EN 61189-3:2008 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 3: Test methods for interconnection structures (printed boards) |
IEC 61189-5-3:2015 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-3: General test methods for materials and assemblies - Soldering paste for printed board assemblies |
ISO 9454-2:1998 | Soft soldering fluxes Classification and requirements Part 2: Performance requirements |
EN ISO 9454-2:2000 | Soft soldering fluxes - Classification and requirements - Part 2: Performance requirements (ISO 9454-2:1998) |
IPC HDBK 005 : 0 | GUIDE TO SOLDER PASTE ASSESSMENT |
IEC 61189-6:2006 | Test methods for electrical materials, interconnection structures and assemblies - Part 6: Test methods for materials used in manufacturing electronic assemblies |
EN 61189-5-3:2015 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-3: General test methods for materials and assemblies - Soldering paste for printed board assemblies |
IEC 61189-5:2006 | Test methods for electrical materials, interconnection structures and assemblies - Part 5: Test methods for printed board assemblies |
IEC 61190-1-1:2002 | Attachment materials for electronic assembly - Part 1-1: Requirements for soldering fluxes for high-quality interconnections in electronics assembly |
IEC 60194:2015 | Printed board design, manufacture and assembly - Terms and definitions |
EN 61190-1-3:2007/A1:2010 | ATTACHMENT MATERIALS FOR ELECTRONIC ASSEMBLY - PART 1-3: REQUIREMENTS FOR ELECTRONIC GRADE SOLDER ALLOYS AND FLUXED AND NON-FLUXED SOLID SOLDER FOR ELECTRONIC SOLDERING APPLICATIONS |
EN 60194:2006 | Printed board design, manufacture and assembly - Terms and definitions |
IEC 61190-1-3:2007+AMD1:2010 CSV | Attachment materials for electronic assembly - Part 1-3: Requirements for electronic grade solder alloys and fluxed and non-fluxed solid solders for electronic soldering applications |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.