EN 60825-1:2014/AC:2017-06
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
SAFETY OF LASER PRODUCTS - PART 1: EQUIPMENT CLASSIFICATION AND REQUIREMENTS (IEC 60825-1:2014)
Superseded date
26-02-2021
Superseded by
Published date
30-06-2017
FOREWORD
1 Scope and object
2 Normative references
3 Terms and definitions
4 Classification principles
5 Determination of the accessible
emission level and product classification
6 Engineering specifications
7 Labelling
8 Other informational requirements
9 Additional requirements for specific laser
products
Annex A (informative) - Maximum permissible
exposure values
Annex B (informative) - Examples of calculations
Annex C (informative) - Description of the classes
and potentially associated hazards
Annex D (informative) - Biophysical considerations
Annex E (informative) - MPEs and AELs expressed
as radiance
Annex F (informative) - Summary tables
Annex G (informative) - Overview of associated parts
of IEC 60825
Bibliography
Annex ZA (normative) - Normative references to international
Publications with their corresponding European
publications
Describes safety of laser products emitting laser radiation in the wavelength range 180 nm to 1 mm.
| Committee |
TC 76
|
| DevelopmentNote |
Supersedes EN 60825. (01/2003)
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| DIN EN 60825-1 Beiblatt 3:2019-04 | Identical |
| IEC 60825-1:2014 | Identical |
| NF EN 60825-1 : 2014 | Identical |
| BS EN 60825-1:2014 | Identical |
| VDE 0837-1 Beiblatt 2:2019-04 | Identical |
| PN EN 60825-1 : 2014 AC 2017 | Identical |
| I.S. EN 60825-1:2014 | Identical |
| CEI EN 60825-1 : 2015 | Identical |
| ONORM OVE EN 60825-1 : 1997 | Identical |
| DIN EN 60825-1 Berichtigung 1:2018-11 | Identical |
| DIN EN 60825-1 : 2015-07 | Identical |
| UNE-EN 60825-1:2015/AC:2017-06 | Identical |
| DIN EN 60825-1 Beiblatt 1:2008-05 | Identical |
| DIN EN 60825-1 Beiblatt 2:2019 | Identical |
| VDE 0837-1 : 2015-07 | Identical |
| SN EN 60825-1:2014 | Identical |
| NEN EN IEC 60825-1 : 2014 C11 2017 | Identical |
| I.S.EN 60825-1:2014&AC:2017-06 | Identical |
| VDE 0837-1 Beiblatt 3:2019-04 | Identical |
| NBN EN 60825-1 : 2014 | Identical |
| UNE-EN 60825-1:2015 | Identical |
| OVE/ONORM EN 60825-1 : 2015 | Identical |
| NEN 10825-1 : 94 AMD 11 97 | Similar to |
| DIN EN 1010-2:2011-05 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 2: Printing and varnishing machines including pre-press machinery (includes Amendment A1:2010) |
| UNE-EN 15163:2018 | Machines and installations for the exploitation and processing of natural stone - Safety - Requirements for diamond wire saws |
| I.S. EN 62149-5:2011 | FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 5: ATM-PON TRANSCEIVERS WITH LD DRIVER AND CDR ICS |
| BS EN 16564:2014 | Machines and plants for mining and tooling of natural stone. Safety. Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions |
| 12/30258456 DC : 0 | BS EN 60950-1:2006/FPRAE:2011 - INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 61029-2-9:2012 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 2-9: PARTICULAR REQUIREMENTS FOR MITRE SAWS (IEC 61029-2-9:1995 (MOD)) |
| BS EN 62149-2:2014 | Fibre optic active components and devices. Performance standards 850 nm discrete vertical cavity surface emitting laser devices |
| BS EN 60745-1 : 2009 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS |
| 09/30206358 DC : DRAFT SEP 2009 | BS EN 1870-4 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTI-BLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING |
| I.S. EN 61202-1:2017 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC ISOLATORS - PART 1: GENERIC SPECIFICATION |
| BS EN 62149-7:2012 | Fibre optic active components and devices. Performance standards 1310 nm discrete vertical cavity surface emitting laser devices |
| 04/30106849 DC : DRAFT MAY 2004 | EN 1870-1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS |
| BS EN 61969-3:2012 | Mechanical structures for electronic equipment. Outdoor enclosures Environmental requirements, tests and safety aspects |
| I.S. EN 12415:2000 | SAFETY OF MACHINE TOOLS - SMALL NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES |
| 12/30258455 DC : 0 | FPREN 60065:2011+FPRAA - AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS |
| BS EN 62150-1:2005 | Fibre optic active components and devices. Test and measurement procedures General and guidance |
| I.S. EN 691-1:2012 | SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS |
| 03/306044 DC : DRAFT APR 2003 | BS EN 14656 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS |
| I.S. TS 61496-3:2003 | SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 3: PARTICULAR REQUIREMENTS FOR ACTIVE OPTO-ELECTRONIC PROTECTIVE DEVICES RESPONSIVE TO DIFFUSE REFLECTION (AOPDDR) |
| CEI EN 62074-1 : 2014 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC WDM DEVICES - PART 1: GENERIC SPECIFICATION |
| 12/30253910 DC : DRAFT JULY 2012 | BS EN 1807-2 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - LOG SAWING MACHINES |
| 10/30232422 DC : DRAFT DEC 2010 | BS EN 1870-9 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 9: DOUBLE BLADE CIRCULAR SAWING MACHINES FOR CROSS-CUTTING WITH INTEGRATED FEED AND WITH MANUAL LOADING AND/OR UNLOADING |
| BS EN 60065 : 2014 | AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS (IEC 60065:2014, MODIFIED) |
| 04/30123607 DC : DRAFT OCT 2004 | EN 15061:2004 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT |
| PREN 1870-3 : DRAFT 2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 3: DOWN CUTTING CROSS-CUT SAWS AND DUAL PURPOSE DOWN CUTTING CROSS-CUT SAWS/CIRCULAR SAW BENCHES |
| BS EN 62471-5:2015 | Photobiological safety of lamps and lamp systems Image projectors |
| I.S. EN 1010-2:2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 2: PRINTING AND VARNISHING MACHINES INCLUDING PRE-PRESS MACHINERY |
| BS EN 61757-1:2012 | Fibre optic sensors Generic specification |
| DIN EN 16564:2015-04 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions |
| DIN EN 415-10:2014-07 | SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS |
| I.S. EN 13128:2001 | SAFETY OF MACHINE TOOLS - MILLING MACHINES (INCLUDING BORING MACHINES) |
| BS EN 62149-4:2010 | Fibre optic active components and devices. Performance standards 1300 nm fibre optic transceivers for Gigabit Ethernet application |
| I.S. EN 14070:2003 | SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES |
| CEI EN 62522 : 2014 | CALIBRATION OF TUNEABLE LASER SOURCES |
| 11/30237569 DC : 0 | BS EN 1870-19 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS |
| CEI EN 60876-1 : 2015 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC SPATIAL SWITCHES - PART 1: GENERIC SPECIFICATION |
| 09/30178331 DC : DRAFT FEB 2009 | BS EN 1870-7:2002/A1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 7: SINGLE BLADE LOG SAWING MACHINES WITH INTEGRATED FEED TABLE AND MANUAL LOADING AND/OR UNLOADING |
| BS EN 62368-1 : 2014 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
| BS EN 61300-1:2016 | Fibre optic interconnecting devices and passive components. Basic test and measurement procedures General and guidance |
| BS EN 60335-2-97 : 2006 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-97: PARTICULAR REQUIREMENTS FOR DRIVES FOR ROLLING SHUTTERS, AWNINGS, BLINDS AND SIMILAR EQUIPMENT |
| 10/30236215 DC : 0 | BS EN 61029-2-9:201X - SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 2-9: PARTICULAR REQUIREMENTS FOR MITRE SAWS |
| 09/30197984 DC : 0 | BS EN 1807-2 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 2: LOG SAWING MACHINES |
| 97/205962 DC : DRAFT MAY 1997 | PREN 50280 - SMALL TRANSMITTING/RECEIVING ANTENNA SYSTEMS - SAFETY REQUIREMENTS |
| I.S. EN 1870-18:2013 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 18: DIMENSION SAWS |
| BS EN 13035-11 : 2006 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 11: DRILLING MACHINES |
| 09/30179627 DC : 0 | BS ISO 4007 - PERSONAL PROTECTIVE EQUIPMENT - EYE AND FACE PROTECTION - VOCABULARY |
| CEI EN 50512 : 2014 | ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - ADVANCED VISUAL DOCKING GUIDANCE SYSTEMS (A-VDGS) |
| CEI EN 61744 : 2006 | CALIBRATION OF FIBRE OPTIC CHROMATIC DISPERSION TEST SETS |
| DIN EN 1807-1:2013-06 | Safety of woodworking machines - Band sawing machines - Part 1: Table band saws and band re-saws |
| I.S. EN 16844:2017+A2:2019 | Aesthetic medicine services - Non-surgical medical treatments |
| I.S. EN 62074-1:2014 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC WDM DEVICES - PART 1: GENERIC SPECIFICATION |
| BS EN 62504:2014 | General lighting. Light emitting diode (LED) products and related equipment. Terms and definitions |
| BS EN 60728-11:2017 | Cable networks for television signals, sound signals and interactive services Safety |
| I.S. CLC/TR 50448:2005 | GUIDE TO LEVELS OF COMPETENCE REQUIRED IN LASER SAFETY |
| PREN 15163 : DRAFT 2014 | MACHINES AND INSTALLATIONS FOR THE EXPLOITATION AND PROCESSING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR DIAMOND WIRE SAWS AND DIAMOND MULTI-WIRE SAWS |
| I.S. EN 415-10:2014 | SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS |
| CEI EN 61280-1-3 : 2011 | FIBRE OPTIC COMMUNICATION SUBSYSTEM TEST PROCEDURES - PART 1-3: GENERAL COMMUNICATION SUBSYSTEMS - CENTRAL WAVELENGTH AND SPECTRAL WIDTH MEASUREMENT |
| PREN 1870-12 : DRAFT 2011 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 12: PENDULUM CROSS-CUT SAWING MACHINES |
| I.S. EN 1807-2:2013 | SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 2: LOG SAWING MACHINES |
| CLC/TS 61496-3:2008 | Safety of machinery - Electro-sensitive protective equipment - Part 3: Particular requirements for Active Opto-electronic Protective Devices responsive to Diffuse Reflection (AOPDDR) |
| CEI EN 60601-2-22 : 2014 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-22: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF SURGICAL, COSMETIC, THERAPEUTIC AND DIAGNOSTIC LASER EQUIPMENT |
| I.S. EN 16564:2014 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES, INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS |
| I.S. EN 61300-3-4:2013 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-4: EXAMINATIONS AND MEASUREMENTS - ATTENUATION (IEC 61300-3-4:2012 (EQV)) |
| I.S. EN 61300-1:2016 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 1: GENERAL AND GUIDANCE |
| UNE-EN 14985:2012 | Cranes - Slewing jib cranes |
| I.S. EN 15949:2012 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR BAR MILLS, STRUCTURAL STEEL MILLS AND WIRE ROD MILLS |
| I.S. EN 62841-1:2015 | ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| CEI EN 60079-29-4 : 2011 | EXPLOSIVE ATMOSPHERES - PART 29-4: GAS DETECTORS - PERFORMANCE REQUIREMENTS OF OPEN PATH DETECTORS FOR FLAMMABLE GASES |
| I.S. EN 50088:1996 | SAFETY OF ELECTRIC TOYS |
| DIN EN 60601-2-40 : 1998 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-40: PARTICULAR REQUIREMENTS FOR THE SAFETY OF ELECTROMYGRAPHS AND EVOKED RESPONSE EQUIPMENT |
| CEI EN 61291-4 : 2012 | OPTICAL AMPLIFIERS - PART 4: MULTICHANNEL APPLICATIONS - PERFORMANCE SPECIFICATION TEMPLATE |
| I.S. EN 50346:2003 | INFORMATION TECHNOLOGY - CABLING INSTALLATION - TESTING OF INSTALLED CABLING |
| I.S. EN 50512:2009 | ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - ADVANCED VISUAL DOCKING GUIDANCE SYSTEMS (A-VDGS) |
| ASTM E 2581 : 2014 : REDLINE | Standard Practice for Shearography of Polymer Matrix Composites and Sandwich Core Materials in Aerospace Applications |
| DIN EN 1870-7:2013-01 | Safety of woodworking machines - Circular sawing machines - Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading |
| UNE-EN 61029-2-9:2013 | Safety of transportable motor-operated electric tools - Part 2-9: Particular requirements for mitre saws |
| DIN EN 12978:2009-10 | Industrial, commercial and garage doors and gates - Safety devices for power operated doors and gates - Requirements and test methods (includes Amendment A1:2009) |
| DIN EN 1870-12:2014-03 | Safety of woodworking machines - Circular sawing machines - Part 12: Pendulum cross-cut sawing machines |
| DIN EN 13675:2010-10 | Safety of machinery - Safety requirements for tube forming and rolling mills and their finishing line equipment (includes Amendment A1:2010) |
| DIN EN 1870-9:2013-01 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 9: DOUBLE BLADE CIRCULAR SAWING MACHINES FOR CROSS-CUTTING WITH INTEGRATED FEED AND WITH MANUAL LOADING AND/OR UNLOADING |
| DIN EN 1870-3:2015-02 | Safety of woodworking machines - Circular sawing machines - Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches |
| BS EN 60519-1:2015 | Safety in installations for electroheating and electromagnetic processing General requirements |
| UNE-EN 1870-4:2012 | Safety of woodworking machines - Circular sawing machines - Part 4: Multiblade rip sawing machines with manual loading and/or unloading |
| BS EN 13128 : 2001 | SAFETY OF MACHINE TOOLS - MILLING MACHINES (INCLUDING BORING MACHINES) |
| UNE-EN 1870-7:2013 | Safety of woodworking machines - Circular sawing machines - Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading |
| BS EN 12254:2010 | Screens for laser working places. Safety requirements and testing |
| BS EN 1870-9:2012 | Safety of woodworking machines. Circular sawing machines Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading |
| BS EN 60950:2000 | Safety of information technology equipment |
| BS EN 1870-15:2012 | Safety of woodworking machines. Circular sawing machines Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading |
| BS EN 12622 : 2009 | SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES |
| BS EN 1034-1 : 2000 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 1 - COMMON REQUIREMENTS |
| BS EN 1870-10:2013 | Safety of woodworking machines. Circular sawing machines Single blade automatic and semi-automatic up-cutting cross-cut sawing machines |
| EN 1010-2:2006+A1:2010 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 2: Printing and varnishing machines including pre-press machinery |
| EN 62496-1:2009 | Optical circuit boards - Part 1: General |
| EN 60825-4:2006/A2:2011 | SAFETY OF LASER PRODUCTS - PART 4: LASER GUARDS |
| EN 61029-2-11:2012/A11:2013 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 2-11: PARTICULAR REQUIREMENTS FOR COMBINED MITRE AND BENCH SAWS |
| EN 60728-14:2014 | Cable networks for television signals, sound signals and interactive services - Part 14: Optical transmission systems using RFoG technology |
| DIN EN 14070:2009-07 | SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES |
| EN 62149-7:2012 | Fibre optic active components and devices - Performance standards - Part 7: 1 310 nm discrete vertical cavity surface emitting laser devices |
| EN 61314-1:2012 | Fibre optic interconnecting devices and passive components - Fibre optic fan-outs - Part 1: Generic specification |
| EN 61029-2-1:2012 | Safety of transportable motor-operated electric tools - Part 2-1: Particular requirements for circular saw benches |
| EN 62134-1:2009 | Fibre optic interconnecting devices and passive components - Fibre optic closures - Part 1: Generic specification |
| DIN EN 14255-1:2005-06 | Measurement and assessment of personal exposures to incoherent optical radiation - Part 1: Ultraviolet radiation emitted by artificial sources in the workplace |
| EN 1010-1:2004+A1:2010 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements |
| EN 16191:2014 | Tunnelling machinery - Safety requirements |
| EN 60255-27:2014 | Measuring relays and protection equipment - Part 27: Product safety requirements |
| EN 61291-2:2016 | Optical amplifiers - Part 2: Single channel applications - Performance specification template |
| EN 1218-3:2001+A1:2009 | Safety of woodworking machines - Tenoning machines - Part 3: Hand fed tenoning machines with sliding table for cutting structural timbers |
| EN 80601-2-58:2015 | Medical electrical equipment - Part 2-58: Particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery |
| EN 62300:2005 | Consumer audio/video equipment digital interface with plastic optical fibre |
| EN 12336:2005+A1:2008 | Tunnelling machines - Shield machines, thrust boring machines, auger boring machines, lining erection equipment - Safety requirements |
| EN 60519-1:2015 | Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements |
| EN 60728-13:2010 | Cable networks for television signals, sound signals and interactive services - Part 13: Optical systems for broadcast signal transmissions |
| EN 12717:2001+A1:2009 | Safety of machine tools - Drilling machines |
| EN 60825-2:2004/A2:2010 | SAFETY OF LASER PRODUCTS - PART 2: SAFETY OF OPTICAL FIBRE COMMUNICATION SYSTEMS (OFCS) |
| EN 50346 : 2002 AMD 2 2009 | INFORMATION TECHNOLOGY - CABLING INSTALLATION - TESTING OF INSTALLED CABLING |
| EN 61029-2-5:2011/A11:2015 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 2-5: PARTICULAR REQUIREMENTS FOR BAND SAWS (IEC 61029-2-5:1993, MODIFIED + A1:2001, MODIFIED) |
| EN 1807-1:2013 | Safety of woodworking machines - Band sawing machines - Part 1: Table band saws and band re-saws |
| EN 61280-1-4:2010 | Fibre optic communication subsystem test procedures - Part 1-4: General communication subsystems - Light source encircled flux measurement method |
| EN 60874-1:2012 | Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 1: Generic specification |
| EN 61290-1:2015 | Optical amplifiers - Test methods - Part 1: Power and gain parameters |
| EN 61291-4:2012 | Optical amplifiers - Part 4: Multichannel applications - Performance specification template |
| EN 61300-3-28:2012 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-28: Examinations and measurements - Transient loss |
| EN 62129:2006/corrigendum:2006 | CALIBRATION OF OPTICAL SPECTRUM ANALYZERS |
| EN 60079-29-4:2010 | Explosive atmospheres - Part 29-4: Gas detectors - Performance requirements of open path detectors for flammable gases |
| EN 61850-3:2014 | Communication networks and systems for power utility automation - Part 3: General requirements |
| EN 62129-1:2016 | Calibration of wavelength/optical frequency measurement instruments - Part 1: Optical spectrum analyzers |
| EN 60950-1:2006/A2:2013 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60950-1:2005/A2:2013, MODIFIED) |
| EN 12478:2000/AC:2001 | SAFETY OF MACHINE TOOLS - LARGE NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES |
| EN 12622:2009+A1:2013 | Safety of machine tools - Hydraulic press brakes |
| UNI EN 1034-1 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 1: COMMON REQUIREMENTS |
| EN 62149-8:2014 | Fibre optic active components and devices - Performance standards - Part 8: Seeded reflective semiconductor optical amplifier devices |
| DEFSTAN 00-25(PT14)/1(2000) : 2000 | HUMAN FACTORS FOR DESIGNERS OF EQUIPMENT - PART 14: MILITARY LAND VEHICLE DESIGN |
| CEI EN 62841-1 : 2016 | ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| DIN EN 16237:2013-04 | Classification of non-electrical sources of incoherent optical radiation |
| BS EN 60728-13:2010 | Cable networks for television signals, sound signals and interactive services Optical systems for broadcast signal transmissions |
| 09/30178310 DC : DRAFT FEB 2009 | BS EN 1807:1999/A1 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES |
| BS EN 62149-8:2014 | Fibre optic active components and devices. Performance standards Seeded reflective semiconductor optical amplifier devices |
| BS EN 50152-3-2:2016 | Railway applications. Fixed installations. Particular requirements for a.c. switchgear Measurement, control and protection devices for specific use in a.c. traction systems. Current transformers |
| BS EN 15949:2012 | Safety of machinery. Safety requirements for bar mills, structural steel mills and wire rod mills |
| CEI EN 62496-1 : 2010 | OPTICAL CIRCUIT BOARDS - PART 1: GENERAL |
| 11/30237566 DC : 0 | BS EN 1870-18 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 18: DIMENSION SAWS |
| BS EN 61290-3-2:2008 | Optical amplifiers. Test methods Noise figure parameters. Electrical spectrum analyzer method |
| 11/30247811 DC : 0 | BS EN 415-10 - SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS |
| I.S. EN 61496-3:2001 | SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PARTICULAR REQUIREMENTS FOR ACTIVE OPTO-ELECTRONIC PROTECTIVE DEVICES RESPONSIVE TO DIFFUSE REFLECTION (AOPDDR) |
| UNE-EN 1870-13:2008 | Safety of woodworking machines - Circular sawing machines - Part 13: Horizontal beam panel sawing machines |
| BS EN 62149-9:2014 | Fibre optic active components and devices. Performance standards Seeded reflective semiconductor optical amplifier transceivers |
| I.S. EN 61969-3:2012 | MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - OUTDOOR ENCLOSURES - PART 3: ENVIRONMENTAL REQUIREMENTS, TESTS AND SAFETY ASPECTS (IEC 61969-3:2011 (EQV)) |
| BS EN 1870-19:2013 | Safety of woodworking machines. Circular sawing machines Circular saw benches (with and without sliding table) and building site saws |
| 07/30161753 DC : 0 | BS EN 15011 - CRANES - BRIDGE AND GANTRY CRANES |
| BS EN 60876-1:2014 | Fibre optic interconnecting devices and passive components. Fibre optic spatial switches Generic specification |
| I.S. EN 12840:2001 | SAFETY OF MACHINE-TOOLS - MANUALLY CONTROLLED TURNING MACHINES WITH OR WITHOUT AUTOMATIC CONTROL |
| I.S. EN 16844:2017 | AESTHETIC MEDICINE SERVICES - NON-SURGICAL MEDICAL PROCEDURES |
| UNI EN 1870-19 : 2014 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS |
| I.S. EN 1870-2:1999 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 2: HORIZONTAL BEAM PANEL SAWS AND VERTICAL PANEL SAWS |
| BS EN 61029-2-11 : 2012 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 2-11: PARTICULAR REQUIREMENTS FOR COMBINED MITRE AND BENCH SAWS |
| BS EN 61202-1:2017 | Fibre optic interconnecting devices and passive components. Fibre optic isolators Generic specification |
| BS EN 15093:2008 | Safety of machinery. Safety requirements for hot flat rolling mills |
| BS EN 14033-3 : 2009 | RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS |
| BS EN 61290-10-5:2014 | Optical amplifiers. Test methods Multichannel parameters. Distributed Raman amplifier gain and noise figure |
| 03/115225 DC : DRAFT SEP 2003 | BS EN 1011-6 - WELDING - RECOMMENDATION FOR WELDING OF METALLIC MATERIALS - PART 6: LASER BEAM WELDING |
| CEI EN 62150-1 : 2005 | FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - TEST AND MEASUREMENT PROCEDURES - PART 1: GENERAL AND GUIDANCE |
| UNI EN 13035-11 : 2010 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 11: DRILLING MACHINES |
| I.S. EN 61010-2-040:2015 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 2-040: PARTICULAR REQUIREMENTS FOR STERILIZERS AND WASHER-DISINFECTORS USED TO TREAT MEDICAL MATERIALS |
| 11/30244752 DC : 0 | BS EN 61029-2-5 - SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 2-5: PARTICULAR REQUIREMENTS FOR BAND SAWS |
| CEN/TR 16040:2010 | Electronic fee collection - Requirements for urban dedicated short-range communication |
| BS EN 16237:2013 | Classification of non-electrical sources of incoherent optical radiation |
| 09/30198762 DC : 0 | BS EN 1807-1 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 1: TABLE BAND SAWS AND BAND RE-SAWS |
| BS EN 61291-2:2016 | Optical amplifiers Single channel applications. Performance specification template |
| CEI EN 62149-4 : 2011 | FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 4: 1300 NM FIBRE OPTIC TRANSCEIVERS FOR GIGABIT ETHERNET APPLICATION |
| DIN EN 15094:2009-04 | Safety of machinery - Safety requirements for cold flat rolling mills |
| 11/30237557 DC : 0 | BS EN 1870-11 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI-AUTOMATIC AND AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS) |
| DIN EN 1807-2:2013-06 | Safety of woodworking machines - Band sawing machines - Part 2: Log sawing machines; German version EN 1807-2:2013 |
| 10/30233953 DC : 0 | BS EN 16191 - TUNNELLING MACHINERY - SAFETY REQUIREMENTS |
| UNI EN 16191 : 2014 | TUNNELLING MACHINERY - SAFETY REQUIREMENTS |
| UNE-EN 60079-29-4:2011 | Explosive atmospheres -- Part 29-4: Gas detectors - Performance requirements of open path detectors for flammable gases |
| 03/306593 DC : DRAFT APR 2003 | BS EN 14673 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS |
| DIN EN 15093:2009-06 | Safety of machinery - Safety requirements for hot flat rolling mills |
| UNE-EN 691-1:2013 | Safety of woodworking machines - Part 1: Common requirements |
| BS EN 61496-2:2013 | Safety of machinery. Electro-sensitive protective equipment Particular requirements for equipment using active opto-electronic protective devices (AOPDs) |
| 07/30174056 DC : 0 | BS EN 60065 - AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS |
| PREN 1870-11 : DRAFT 2011 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI-AUTOMATIC AND AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS) |
| UNI EN 15093 : 2009 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HOT FLAT ROLLING MILLS |
| BS EN 61969-1:2012 | Mechanical structures for electronic equipment. Outdoor enclosures Design guidelines |
| BS EN 61300-3-28:2012 | Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Examinations and measurements. Transient loss |
| 09/30178325 DC : DRAFT FEB 2009 | BS EN 1870-5:2002/A1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 5: CIRCULAR SAWBENCHES/UP-CUTTING CROSS-CUT SAWING MACHINES |
| BS 5724-2.40(1998) : 1998 | MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR SAFETY - PART 2-40: ELECTROMYOGRAPHS AND EVOKED RESPONSE EQUIPMENT |
| BS EN 16191:2014 | Tunnelling machinery. Safety requirements |
| I.S. EN 61029-2-1:2012 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 2-1: PARTICULAR REQUIREMENTS FOR CIRCULAR SAW BENCHES (IEC 61029-2-1:1993 (MOD) + A1:1999 (EQV) + A2:2001 (EQV)) |
| BS EN 62149-5:2011 | Fibre optic active components and devices. Performance standards ATM-PON transceivers with LD driver and CDR ICs |
| UNE-EN 16564:2015 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions |
| DD ENV 12647:1997 | Bar coding. Test specifications for bar code verifiers |
| 03/118895 DC : 0 | EN 12622 - SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES |
| I.S. EN 61207-7:2013 | EXPRESSION OF PERFORMANCE OF GAS ANALYZERS - PART 7: TUNEABLE SEMICONDUCTOR LASER GAS ANALYZERS |
| 09/30178346 DC : 0 | BS EN 1870-12:2003/A1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 12: PENDULUM CROSS-CUT SAWING MACHINES |
| CLC/TR 50448:2005 | Guide to levels of competence required in laser safety |
| CEI EN 61073-1 : 2010 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - MECHANICAL SPLICES AND FUSION SPLICE PROTECTORS FOR OPTICAL FIBRES AND CABLES - PART 1: GENERIC SPECIFICATION |
| BS EN 61010-2-040:2015 | Safety requirements for electrical equipment for measurement, control, and laboratory use Particular requirements for sterilizers and washer-disinfectors used to treat medical materials |
| 04/301783 DC : DRAFT JAN 2004 | EN 848-3 - SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 3: NUMERICALLY CONTROLLED (NC) BORING MACHINES AND ROUTING MACHINES |
| CEI EN 61314-1 : 2012 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC FAN-OUTS - PART 1: GENERIC SPECIFICATION |
| I.S. EN 60728-11:2017 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 11: SAFETY |
| I.S. EN 15093:2008 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HOT FLAT ROLLING MILLS |
| I.S. EN 60255-27:2014 | MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 27: PRODUCT SAFETY REQUIREMENTS |
| BS EN 61496-3:2001 | Safety of machinery. Electro-sensitive protective equipment Particular requirements for active opto-electronic protective devices responsive to diffuse reflection (AOPDDR) |
| I.S. EN 61757-1:2012 | FIBRE OPTIC SENSORS - PART 1: GENERIC SPECIFICATION (IEC 61757-1:2012 (EQV)) |
| BS EN 60601-2-40:1998 | Medical electrical equipment. Particular requirements for safety Specification for electromyographs and evoked response equipment |
| I.S. EN 61291-4:2012 | OPTICAL AMPLIFIERS - PART 4: MULTICHANNEL APPLICATIONS - PERFORMANCE SPECIFICATION TEMPLATE (IEC 61291-4:2011 (EQV)) |
| I.S. EN 62134-1:2009 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CLOSURES - PART 1: GENERIC SPECIFICATION |
| I.S. EN 61300-3-53:2015 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-53: EXAMINATIONS AND MEASUREMENTS - ENCIRCLED ANGULAR FLUX (EAF) MEASUREMENT METHOD BASED ON TWO-DIMENSIONAL FAR FIELD DATA FROM STEP INDEX MULTIMODE WAVEGUIDE (INCLUDING FIBRE) |
| I.S. EN 62129-1:2016 | CALIBRATION OF WAVELENGTH/OPTICAL FREQUENCY MEASUREMENT INSTRUMENTS - PART 1: OPTICAL SPECTRUM ANALYZERS |
| I.S. EN 61280-1-3:2010 | FIBRE OPTIC COMMUNICATION SUBSYSTEM TEST PROCEDURES - PART 1-3: GENERAL COMMUNICATION SUBSYSTEMS - CENTRAL WAVELENGTH AND SPECTRAL WIDTH MEASUREMENT |
| I.S. EN 61850-3:2014 | COMMUNICATION NETWORKS AND SYSTEMS FOR POWER UTILITY AUTOMATION - PART 3: GENERAL REQUIREMENTS |
| CEI EN 60728-6 : 2012 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 6: OPTICAL EQUIPMENT |
| I.S. EN 61280-2-3:2009 | FIBRE OPTIC COMMUNICATION SUBSYSTEM TEST PROCEDURES - PART 2-3: DIGITAL SYSTEMS - JITTER AND WANDER MEASUREMENTS |
| UNI EN 15949 : 2012 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR BAR MILLS, STRUCTURAL STEEL MILLS AND WIRE ROD MILLS |
| I.S. EN 61291-2:2016 | OPTICAL AMPLIFIERS - PART 2: SINGLE CHANNEL APPLICATIONS - PERFORMANCE SPECIFICATION TEMPLATE |
| EN 61010-1:2010 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements |
| EN 61010-2-040:2015 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-040 Particular requirements for sterilizers and washer-disinfectors used to treat medical materials |
| DIN EN 1010-1:2011-06 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements (includes Amendment A1:2010) |
| DIN EN 746-1:2010-02 | Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment (includes Amendment A1:2009) |
| DIN EN 1807:2010-02 | SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES |
| DIN EN 13128:2009-09 | SAFETY OF MACHINE TOOLS - MILLING MACHINES (INCLUDING BORING MACHINES) |
| DIN EN 12254:2012-04 | SCREENS FOR LASER WORKING PLACES - SAFETY REQUIREMENTS AND TESTING |
| DIN EN 12417:2009-07 | MACHINE TOOLS - SAFETY - MACHINING CENTRES |
| DIN EN 1011-6:2006-03 | WELDING - RECOMMENDATION FOR WELDING OF METALLIC MATERIALS - PART 6: LASER BEAM WELDING |
| DIN EN 1640:2010-02 | Dentistry - Medical devices for dentistry - Equipment |
| DIN EN 1870-13:2013-07 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES |
| DIN EN 1870-10:2013-07 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES |
| DIN EN 1870-8:2013-03 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 8: SINGLE BLADE EDGING CIRCULAR RIP SAWING MACHINES WITH POWER DRIVEN SAW UNIT AND MANUAL LOADING AND/OR UNLOADING |
| UNE-EN 207:2018 | Personal eye-protection equipment - Filters and eye-protectors against laser radiation (laser eye-protectors) |
| DIN EN 14656:2010-10 | Safety of machinery - Safety requirements for extrusion presses for steel and non-ferrous metals (includes Amendment A1:2010) |
| DIN EN 15011:2014-09 | Cranes - Bridge and gantry cranes (includes Amendment A1:2014) |
| BS EN 1870-2:1999 | Safety of woodworking machines. Circular sawing machines Horizontal beam panel saws and vertical panel saws |
| BS EN 1870-7:2012 | Safety of woodworking machines. Circular sawing machines Single blade log sawing machines with integrated feed table and manual loading and/or unloading |
| UNE-EN 61029-2-1:2013 | Safety of transportable motor-operated electric tools - Part 2-1: Particular requirements for circular saw benches |
| BS EN 1640:2009 | Dentistry. Medical devices for dentistry. Equipment |
| BS EN ISO 11111-1:2016 | Textile machinery. Safety requirements Common requirements |
| UNE-EN 61029-2-5:2012 | Safety of transportable motor-operated electric tools - Part 2-5: Particular requirements for band saws |
| UNE-EN 1870-10:2013 | Safety of woodworking machines - Circular sawing machines - Part 10: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines |
| BS EN 14673 : 2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS |
| EN 60065:2014/AC:2017-01 | AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS (IEC 60065:2014/COR2:2016) |
| I.S. EN 12717:2001 | SAFETY OF MACHINE TOOLS - DRILLING MACHINES |
| I.S. EN 1870-8:2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 8: SINGLE BLADE EDGING CIRCULAR RIP SAWING MACHINES WITH POWER DRIVEN SAW UNIT AND MANUAL LOADING AND/OR UNLOADING |
| I.S. EN 14656:2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS |
| I.S. EN 1870-10:2013 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES |
| I.S. EN 12622:2009 | SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES |
| I.S. EN 1870-11:2013 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS) |
| DIN EN 1218-3:2009-12 | SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 3: HAND FED TENONING MACHINES WITH SLIDING TABLE FOR CUTTING STRUCTURAL TIMBERS |
| I.S. EN 1870-12:2013 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 12: PENDULUM CROSS-CUT SAWING MACHINES |
| I.S. EN 1870-9:2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 9: DOUBLE BLADE CIRCULAR SAWING MACHINES FOR CROSSCUTTING WITH INTEGRATED FEED AND WITH MANUAL LOADING AND/OR UNLOADING |
| I.S. EN 1870-3:2014 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 3: DOWN CUTTING CROSS-CUT SAWS AND DUAL PURPOSE DOWN CUTTING CROSS-CUT SAWS/CIRCULAR SAW BENCHES |
| DIN EN 1870-1:1999-07 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS |
| EN 16564:2014 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions |
| EN 61300-3-53:2015 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-53: Examinations and measurements - Encircled angular flux (EAF) measurement method based on two-dimensional far field data from step index multimode waveguide (including fibre) |
| I.S. EN 1915-1:2013 | AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 1: BASIC SAFETY REQUIREMENTS |
| I.S. EN 60825-2:2004 | SAFETY OF LASER PRODUCTS - PART 2: SAFETY OF OPTICAL FIBRE COMMUNICATION SYSTEMS (OFCS) |
| I.S. EN ISO 11149:1998 | OPTICS AND OPTICAL INSTRUMENTS - LASERS AND LASER-RELATED EQUIPMENT - FIBRE OPTIC CONNECTORS FOR NON-TELECOMMUNICATION LASER APPLICATIONS |
| I.S. EN 12254:2010 | SCREENS FOR LASER WORKING PLACES - SAFETY REQUIREMENTS AND TESTING |
| I.S. EN 60825-4:2006 | SAFETY OF LASER PRODUCTS - PART 4: LASER GUARDS |
| I.S. EN 1870-17:2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS) |
| I.S. EN ISO 11111-1:2016 | TEXTILE MACHINERY - SAFETY REQUIREMENTS - PART 1: COMMON REQUIREMENTS (ISO 11111-1:2016) |
| DIN EN 1807:1999-10 | SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES |
| DIN EN 1034-1:2010-12 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 1: Common requirements (includes Amendment A1:2010) |
| I.S. EN 1870-15:2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 15: MULTIBLADE CROSS-CUT SAWING MACHINES WITH INTEGRATED FEED OF THE WORKPIECE AND MANUAL LOADING AND/OR UNLOADING |
| I.S. EN 1218-3:2002 | SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 3: HAND FED TENONING MACHINES WITH SLIDING TABLE FOR CUTTING STRUCTURAL TIMBERS |
| I.S. EN 1640:2009 | DENTISTRY - MEDICAL DEVICES FOR DENTISTRY - EQUIPMENT |
| I.S. EN 1034-1:2000 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 1: COMMON REQUIREMENTS |
| I.S. EN 12978:2003 | INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY DEVICES FOR POWER OPERATED DOORS AND GATES - REQUIREMENTS AND TEST METHODS |
| I.S. EN 13675:2004 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR TUBE FORMING AND ROLLING MILLS AND THEIR FINISHING LINE EQUIPMENT |
| I.S. EN 13985:2003 | MACHINE TOOLS - SAFETY - GUILLOTINE SHEARS |
| I.S. EN 617:2001 | |
| I.S. EN 746-1:1997 | INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 1: COMMON SAFETY REQUIREMENTS FOR INDUSTRIAL THERMOPROCESSING EQUIPMENT |
| EN 15011:2011+A1:2014 | Cranes - Bridge and gantry cranes |
| I.S. EN 1010-1:2005 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS |
| DIN EN 13788:2002-04 | MACHINE TOOLS - SAFETY - MULTI-SPINDLE AUTOMATIC TURNING MACHINES |
| I.S. EN 14673:2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS |
| I.S. EN 1870-5:2002 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 5: CIRCULAR SAWBENCHES/UP-CUTTING CROSS-CUT SAWING MACHINES |
| I.S. EN 208:2009 | PERSONAL EYE-PROTECTION - EYE-PROTECTORS FOR ADJUSTMENT WORK ON LASERS AND LASER SYSTEMS (LASER ADJUSTMENT EYE-PROTECTORS) |
| I.S. EN 1870-7:2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 7: SINGLE BLADE LOG SAWING MACHINES WITH INTEGRATED FEED TABLE AND MANUAL LOADING AND/OR UNLOADING |
| I.S. EN 207:2017 | PERSONAL EYE-PROTECTION EQUIPMENT - FILTERS AND EYE-PROTECTORS AGAINST LASER RADIATION (LASER EYE-PROTECTORS) |
| I.S. EN 1870-4:2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTIBLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING |
| DIN EN 12336:2010-03 | TUNNELLING MACHINES - SHIELD MACHINES, THRUST BORING MACHINES, AUGER BORING MACHINES, LINING ERECTION EQUIPMENT - SAFETY REQUIREMENTS |
| I.S. EN 14985:2012 | CRANES - SLEWING JIB CRANES |
| VDE 0400-40-1 : 2000 AMD 1 2004 | SPECIFICATION FOR OPEN PATH APPARATUS FOR THE DETECTION OF COMBUSTIBLE OR TOXIC GASES AND VAPOURS - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
| ONORM EN 15094 : 2009 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR COLD FLAT ROLLING MILLS |
| VDI 3786 Blatt 19:2016-10 (Draft) | Environmental meteorology - Ground-based remote sensing of meteorological parameters - Particle backscatter lidar |
| DIN EN 15949:2012-05 | Safety of machinery - Safety requirements for bar mills, structural steel mills and wire rod mills |
| CEI EN 61496-2 : 2014 | SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 2: PARTICULAR REQUIREMENTS FOR EQUIPMENT USING ACTIVE OPTO-ELECTRONIC PROTECTIVE DEVICES (AOPDS) |
| CEI EN 61300-3-4 : 2014 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-4: EXAMINATIONS AND MEASUREMENTS - ATTENUATION |
| TS 103 247 : 1.1.1 | ACCESS, TERMINALS, TRANSMISSION AND MULTIPLEXING (ATTM); SINGLEMODE OPTICAL FIBRE SYSTEM SPECIFICATIONS FOR HOME CABLING |
| BS EN 61029-2-9 : 2012 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 2-9: PARTICULAR REQUIREMENTS FOR MITRE SAWS |
| BS EN 62074-1:2014 | Fibre optic interconnecting devices and passive components. Fibre optic WDM devices Generic specification |
| DIN EN 13035-11:2010-07 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 11: Drilling machines (includes Amendment A1:2010) |
| EN 61290-1-3:2015 | Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method |
| BS EN 60728-14:2014 | Cable networks for television signals, sound signals and interactive services Optical transmission systems using RFoG technology |
| 14/30303383 DC : 0 | BS EN 62115/AMD:2014 - ELECTRIC TOYS - SAFETY |
| UNI EN 691-1 : 2012 | SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS |
| BS EN 61280-1-4:2010 | Fibre optic communication subsystem test procedures General communication subsystems. Light source encircled flux measurement method |
| BS EN 61280-2-3:2009 | Fibre optic communication subsystem test procedures Digital systems. Jitter and wander measurements |
| 09/30175681 DC : 0 | BS EN 14656:2006/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS |
| BS EN 60825-12:2004 | Safety of laser products Safety of free space optical communication systems used for transmission of information |
| EN 60728-11:2017 | Cable networks for television signals, sound signals and interactive services - Part 11: Safety |
| BS EN 61290-10-1:2009 | Optical amplifiers. Test methods Multichannel parameters. Pulse method using an optical switch and optical spectrum analyzer |
| 11/30237560 DC : 0 | BS EN 1870-12 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 12: PENDULUM CROSS-CUT SAWING MACHINES |
| DD ENV 12648:1997 | Bar coding. Test specifications for bar code printers |
| BS EN 61291-4:2012 | Optical amplifiers Multichannel applications. Performance specification template |
| I.S. EN 13788:2002 | MACHINE TOOLS - SAFETY - MULTI-SPINDLE AUTOMATIC TURNING MACHINES |
| BS EN 50512:2009 | Electrical installations for lighting and beaconing of aerodromes. Advanced visual docking guidance systems (A-VDGS) |
| UNE-EN 50512:2011 | Electrical installations for lighting and beaconing of aerodromes - Advanced Visual Docking Guidance Systems (A-VDGS) |
| 15/30317874 DC : 0 | BS EN 16844 - AESTHETIC MEDICINE SERVICES - NON-SURGICAL MEDICAL PROCEDURES |
| CEI EN 61300-1 : 2012 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 1: GENERAL AND GUIDANCE |
| BS EN 61314-1:2012 | Fibre optic interconnecting devices and passive components. Fibre optic fan-outs Generic specification |
| I.S. EN 1649:2004 | AIDC TECHNOLOGIES - OPERATIONAL ASPECTS AFFECTING THE READING OF BAR CODE SYMBOLS |
| BS EN 60255-27:2014 | Measuring relays and protection equipment Product safety requirements |
| 08/30181001 DC : DRAFT APR 2008 | BS EN 50512 - ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - ADVANCED VISUAL DOCKING GUIDANCE SYSTEMS (A-VDGS) |
| I.S. EN 62149-7:2012 | FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 7: 1310 NM DISCRETE VERTICAL CAVITY SURFACE EMITTING LASER DEVICES (IEC 62149-7:2012 (EQV)) |
| BS EN 60601-2-22:2013 | Medical electrical equipment Particular requirements for basic safety and essential performance of surgical, cosmetic, therapeutic and diagnostic laser equipment |
| BS EN 62496-2-1:2011 | Optical circuit boards Measurements. Optical attenuation and isolation |
| 13/30286202 DC : 0 | BS EN 60335-2-103 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-103: PARTICULAR REQUIREMENTS FOR DRIVES FOR GATES, DOORS AND WINDOWS |
| 10/30233212 DC : 0 | BS EN 848-3 - SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOLS - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES |
| 12/30253907 DC : DRAFT JULY 2012 | BS EN 1807-1 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - TABLE BAND SAWS AND BAND RE-SAWS |
| BS EN 1807-2:2013 | Safety of woodworking machines. Band sawing machines Log sawing machines |
| BS EN 62496-1:2009 | Optical circuit boards General |
| 10/30232431 DC : DRAFT DEC 2010 | BS EN 1870-17 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (MANUAL RADIAL ARM SAWS) |
| BS EN 1010-2 : 2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 2: PRINTING AND VARNISHING MACHINES INCLUDING PRE-PRESS MACHINERY |
| 09/30178334 DC : DRAFT FEB 2009 | BS EN 1870-8:2001/A1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 8: SINGLE BLADE EDGING CIRCULAR RIP SAWING MACHINES WITH POWER DRIVEN SAW UNIT AND MANUAL LOADING AND/OR UNLOADING |
| 09/30178337 DC : 0 | BS EN 1870-9:2000/A1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 9: DOUBLE BLADE CIRCULAR SAWING MACHINES FOR CROSS-CUTTING WITH INTEGRATED FEED AND WITH MANUAL LOADING AND/OR UNLOADING |
| BS EN 50346 : 2002 | INFORMATION TECHNOLOGY - CABLING INSTALLATION - TESTING OF INSTALLED CABLING |
| CEI EN 62099 : 2002 | FIBRE OPTIC WAVELENGTH SWITCHES - GENERIC SPECIFICATION |
| UNI EN 15094 : 2009 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR COLD FLAT ROLLING MILLS |
| EN 61202-1:2017 | Fibre optic interconnecting devices and passive components - Fibre optic isolators - Part 1: Generic specification |
| BS EN 1807-1:2013 | Safety of woodworking machines. Band sawing machines Table band saws and band re-saws |
| DIN EN 1870-18:2013-08 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 18: DIMENSION SAWS |
| 04/30110326 DC : DRAFT APR 2004 | EN 1870-17 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT CIRCULAR SAWING MACHINES WITH ONE SAW UNIT (MANUAL RADIAL ARM SAWS) |
| I.S. EN 61280-1-4:2010 | FIBRE OPTIC COMMUNICATION SUBSYSTEM TEST PROCEDURES - PART 1-4: GENERAL COMMUNICATION SUBSYSTEMS - LIGHT SOURCE ENCIRCLED FLUX MEASUREMENT METHOD |
| I.S. EN 61314-1:2012 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC FAN-OUTS - PART 1: GENERIC SPECIFICATION (IEC 61314-1:2011 (EQV)) |
| BS EN 61603-1:1997 | Transmission of audio and/or video and related signals using infra-red radiation General |
| 11/30237563 DC : 0 | BS EN 1870-10 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES |
| 10/30214958 DC : 0 | BS EN 1915-1 - AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 1: BASIC SAFETY REQUIREMENTS |
| I.S. EN 60874-1:2012 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - CONNECTORS FOR OPTICAL FIBRES AND CABLES - PART 1: GENERIC SPECIFICATION (IEC 60874-1:2011 (EQV)) |
| DIN EN 16191:2014-09 | TUNNELLING MACHINERY - SAFETY REQUIREMENTS |
| BS EN 50083-6:1998 | Cabled distribution systems for television and sound signals Optical equipment |
| CEI EN 62368-1 : 2016 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
| PD CLC/TR 50448:2005 | Guide to levels of competence required in laser safety |
| 09/30178343 DC : 0 | BS EN 1870-11:2003/A1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI-AUTOMATIC AND AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS) |
| BS EN 61029-2-5 : 2011 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 2-5: PARTICULAR REQUIREMENTS FOR BAND SAWS |
| BS EN 15094:2008 | Safety of machinery. Safety requirements for cold flat rolling mills |
| BS EN 50241-1:1999 | Specification for open path apparatus for the detection of combustible or toxic gases and vapours General requirements and test methods |
| PD CEN/TR 16040:2010 | Electronic fee collection. Requirements for urban dedicated short-range communication |
| BS EN 60335-2-103:2015 | Household and similar electrical appliances. Safety Particular requirements for drives for gates, doors and windows |
| CEI EN 60728-13 : 2010 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 13: OPTICAL SYSTEMS FOR BROADCAST SIGNAL TRANSMISSIONS |
| 16/30336443 DC : 0 | BS EN 207 - PERSONAL EYE-PROTECTION EQUIPMENT - FILTERS AND EYE-PROTECTORS AGAINST LASER RADIATION (LASER EYE-PROTECTORS) |
| CEI EN 60825-12 : 2005 | SAFETY OF LASER PRODUCTS - PART 12: SAFETY OF FREE SPACE OPTICAL COMMUNICATION SYSTEMS USED FOR TRANSMISSION OF INFORMATION |
| PREN 16191 : DRAFT 2010 | TUNNELLING MACHINERY - SAFETY REQUIREMENTS |
| 03/114805 DC : DRAFT SEP 2003 | BS EN ISO/IEEE 11073-30300 - HEALTH INFORMATICS - POINT-OF-CARE MEDICAL DEVICE COMMUNICATIONS - PART 30300: TRANSPORT PROFILE - IRDA BASED - INFRARED WIRELESS |
| BS EN 61280-2-5:1998 | Fibre optic communication subsystem basic test procedures. Test procedures for digital systems Jitter transfer function measurement |
| UNE-EN 60335-2-103:2015 | Household and similar electrical appliances - Safety - Part 2-103: Particular requirements for drives for gates, doors and windows |
| UNE-EN 1807-1:2013 | Safety of woodworking machines - Band sawing machines - Part 1: Table band saws and band re-saws |
| DD CLC/TS 61496-3:2008 | Safety of machinery. Electro-sensitive protective equipment Particular requirements for active opto-electronic protective devices responsive to diffuse reflection (AOPDDR) |
| BS EN 80601-2-58:2015 | Medical electrical equipment Particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery |
| VDE 0750-2-40 : 1998 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-40: PARTICULAR REQUIREMENTS FOR THE SAFETY OF ELECTROMYOGRAPHS AND EVOKED RESPONSE EQUIPMENT |
| I.S. EN 62149-3:2014 | FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 3: MODULATOR-INTEGRATED LASER DIODE TRANSMITTERS FOR 2,5-GBIT/S TO 40-GBIT/S FIBRE OPTIC TRANSMISSION SYSTEMS |
| CEI EN 61300-3-28 : 2013 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-28: EXAMINATIONS AND MEASUREMENTS - TRANSIENT LOSS |
| CEI EN 61280-2-3 : 2010 | FIBRE OPTIC COMMUNICATION SUBSYSTEM TEST PROCEDURES - PART 2-3: DIGITAL SYSTEMS - JITTER AND WANDER MEASUREMENTS |
| AEP-4495 : 2016 | GUIDANCE FOR THE PROCUREMENT OF LASER EYE PROTECTION (LEP) FOR THE INDIVIDUAL MILITARY USER |
| I.S. EN 62496-1:2009 | OPTICAL CIRCUIT BOARDS - PART 1: GENERAL |
| BS EN 61290-11-1:2008 | Optical amplifiers. Test methods Polarization mode dispersion parameter. Jones matrix eigenanalysis (JME) |
| UNI EN 1807-2 : 2013 | SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 2: LOG SAWING MACHINES |
| I.S. EN 62496-2-1:2011 | OPTICAL CIRCUIT BOARDS - PART 2-1: MEASUREMENTS - OPTICAL ATTENUATION AND ISOLATION (IEC 62496-2-1:2011 (EQV)) |
| BS EN 60079-29-4:2010 | Explosive atmospheres Gas detectors. Performance requirements of open path detectors for flammable gases |
| I.S. EN 15163:2017 | MACHINES AND INSTALLATIONS FOR THE EXPLOITATION AND PROCESSING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR DIAMOND WIRE SAWS |
| I.S. EN 60825-12:2004 | SAFETY OF LASER PRODUCTS - PART 12: SAFETY OF FREE SPACE OPTICAL COMMUNICATION SYSTEMS USED FOR TRANSMISSION OF INFORMATION |
| I.S. EN 61029-2-11:2012 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 2-11: PARTICULAR REQUIREMENTS FOR COMBINED MITRE AND BENCH SAWS (IEC 61029-2-11:2001 (MOD)) |
| I.S. EN 60601-1-1:2001 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-1: GENERAL REQUIREMENTS FOR SAFETY - COLLATERAL STANDARD: SAFETY REQUIREMENTS FOR MEDICAL ELECTRICAL SYSTEMS |
| I.S. EN 62115:2006 | ELECTRIC TOYS - SAFETY(IEC 62115:2003 (MOD) + A1:2004 (EQV)) |
| UNI EN 415-10 : 2014 | SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS |
| UNE-EN 62471-5:2016 | Photobiological safety of lamps and lamp systems - Part 5: Image projectors |
| CEI EN 61280-1-4 : 2011 | FIBRE OPTIC COMMUNICATION SUBSYSTEM TEST PROCEDURES - PART 1-4: GENERAL COMMUNICATION SUBSYSTEMS - LIGHT SOURCE ENCIRCLED FLUX MEASUREMENT METHOD |
| CEI EN 62149-7 : 2013 | FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 7: 1310 NM DISCRETE VERTICAL CAVITY SURFACE EMITTING LASER DEVICES |
| EN 60601-2-40:1998 | Medical electrical equipment - Part 2-40: Particular requirements for the safety of electromyographs and evoked response equipment |
| I.S. EN 60950-1:2006 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60950-1:2005 (MOD)) |
| PREN 12978 : DRAFT 2017 | INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY DEVICES FOR POWER OPERATED DOORS AND GATES - REQUIREMENTS AND TEST METHODS |
| PREN 1870-10 : DRAFT 2011 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES |
| CLC/TS 61496-2:2006 | Safety of machinery - Electro-sensitive protective equipment - Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs) |
| PREN 60335-2-103 : DRAFT 2013 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-103: PARTICULAR REQUIREMENTS FOR DRIVES FOR GATES, DOORS AND WINDOWS (IEC 60335-2-103:2006, MODIFIED + A1:2010, MODIFIED) |
| EN 61280-1-3:2010 | Fibre optic communication subsystem test procedures - Part 1-3: General communication subsystems - Central wavelength and spectral width measurement |
| I.S. EN 62149-4:2010 | FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 4: 1300 NM FIBRE OPTIC TRANSCEIVERS FOR GIGABIT ETHERNET APPLICATION |
| EN 16844:2017 | Aesthetic medicine services - Non-surgical medical treatments |
| UNE-EN 60728-11:2012 | Cable networks for television signals, sound signals and interactive services - Part 11: Safety |
| DIN EN 1870-11:2014-02 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS) |
| DIN EN 1870-17:2015-06 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS) |
| DIN EN 12622:2014-02 | Safety of machine tools - Hydraulic press brakes (includes Amendment A1:2013) |
| DIN EN 1870-15:2013-01 | Safety of woodworking machines - Circular sawing machines - Part 15: Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading |
| DIN EN 1649:2004-11 | AIDC technologies - Operational aspects affecting the reading of bar code symbols |
| DIN EN 12717:2009-07 | SAFETY OF MACHINE TOOLS - DRILLING MACHINES |
| DIN EN 848-3:2013-01 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOLS - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES |
| DIN EN 13985:2009-11 | Machine tools - Safety - Guillotine shears (includes Amendment A1:2009) |
| DIN EN 14673:2010-10 | Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals (includes Amendment A1:2010) |
| BS EN 12478:2001 | Safety of machine tools. Large numerically controlled turning machines and turning centres |
| BS EN 746-1 : 1997 | INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 1: COMMON SAFETY REQUIREMENTS FOR INDUSTRIAL THERMOPROCESSING EQUIPMENT |
| BS EN 1649:2004 | AIDC technologies. Operational aspects affecting the reading of bar code symbols |
| UNE-EN 1870-8:2013 | Safety of woodworking machines - Circular sawing machines - Part 8: Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading |
| UNE-EN 208:2010 | Personal eye-protection - Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors) |
| BS EN ISO 15616-1:2003 | Acceptance tests for CO<sub>2</sub>- laser beam machines for high quality welding and cutting General principles, acceptance conditions |
| EN 62149-3:2014 | Fibre optic active components and devices - Performance standards - Part 3: Modulator-integrated laser diode transmitters for 2,5-Gbit/s to 40-Gbit/s fibre optic transmission systems |
| EN 62149-5:2011 | Fibre optic active components and devices - Performance standards - Part 5: ATM-PON transceivers with LD driver and CDR ICs |
| CEI EN 60519-1 : 2016 | SAFETY IN INSTALLATIONS FOR ELECTROHEATING AND ELECTROMAGNETIC PROCESSING - PART 1: GENERAL REQUIREMENTS |
| UNE-EN 61010-1:2011 | Safety requirements for electrical equipment for measurement, control and laboratory use -- Part 1: General requirements |
| EN 60601-2-22:2013 | Medical electrical equipment - Part 2-22: Particular requirements for basic safety and essential performance of surgical, cosmetic, therapeutic and diagnostic laser equipment |
| EN 61969-1:2012 | Mechanical structures for electronic equipment - Outdoor enclosures - Part 1: Design guidelines |
| EN 60745-1:2009/A11:2010 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS |
| EN 60745-1:2006 | Hand-held motor-operated electric tools - Safety - Part 1: General requirements |
| EN 1011-6:2005 | Welding - Recommendation for welding of metallic materials - Part 6: Laser beam welding |
| UNE-EN 848-3:2013 | Safety of woodworking machines - One side moulding machines with rotating tool - Part 3: Numerically controlled (NC) boring and routing machines |
| EN 61496-2:2013 | Safety of machinery - Electro-sensitive protective equipment - Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs) |
| UNE-EN 60950-1:2007 | Information technology equipment - Safety - Part 1: General requirements |
| EN 61969-3:2012 | Mechanical structures for electronic equipment - Outdoor enclosures - Part 3: Environmental requirements, tests and safety aspects |
| EN 13985:2003+A1:2009 | Machine tools - Safety - Guillotine shears |
| EN 1870-15:2012 | Safety of woodworking machines - Circular sawing machines - Part 15: Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading |
| UNI EN 1870-8 : 2013 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 8: SINGLE BLADE EDGING CIRCULAR RIP SAWING MACHINES WITH POWER DRIVEN SAW UNIT AND MANUAL LOADING AND/OR UNLOADING |
| UNI EN 1870-13 : 2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES |
| UNI EN 1010-1 : 2011 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS |
| UNI EN 1870-15 : 2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 15: MULTI-BLADE CROSS-CUT SAWING MACHINES WITH INTEGRATED FEED OF THE WORKPIECE AND MANUAL LOADING AND/OR UNLOADING |
| UNI EN 1640 : 2010 | DENTISTRY - MEDICAL DEVICES FOR DENTISTRY - EQUIPMENT |
| EN 617:2001+A1:2010 | Continuous handling equipment and systems - Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers |
| UNI EN 848-3 : 2012 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES |
| UNI EN 617 : 2011 | CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - SAFETY AND EMC REQUIREMENTS FOR THE EQUIPMENT FOR THE STORAGE OF BULK MATERIALS IN SILOS, BUNKERS, BINS AND HOPPERS |
| UNI EN 14673 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS |
| EN 50088 : 96 COR 2007 | SAFETY OF ELECTRIC TOYS |
| UNI EN 1010-2 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 2: PRINTING AND VARNISHING MACHINES INCLUDING PRE-PRESS MACHINERY |
| ENV 12647 : DRAFT 1997 | BAR CODING - TEST SPECIFICATIONS FOR BAR CODE VERIFIERS |
| UNI EN 12417 : 2009 | MACHINE TOOLS - SAFETY - MACHINING CENTRES |
| UNI EN 12978 : 2009 | INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY DEVICES FOR POWER OPERATED DOORS AND GATES - REQUIREMENTS AND TEST METHODS |
| EN 50241-1 : 99 AMD 1 2004 | SPECIFICATION FOR OPEN PATH APPARATUS FOR THE DETECTION OF COMBUSTIBLE OR TOXIC GASES AND VAPOURS - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
| UNI EN 1870-11 : 2013 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS) |
| UNI EN 1915-1 : 2014 | AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 1: BASIC SAFETY REQUIREMENTS |
| EN 1870-11:2013 | Safety of woodworking machines - Circular sawing machines - Part 11: Semi automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws) |
| UNI EN 1870-9 : 2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 9: DOUBLE BLADE CIRCULAR SAWING MACHINES FOR CROSS-CUTTING WITH INTEGRATED FEED AND WITH MANUAL LOADING AND/OR UNLOADING |
| UNI EN 1870-12 : 2014 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 12: PENDULUM CROSS-CUT SAWING MACHINES |
| UNI EN 14656 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS |
| UNI EN 14985 : 2012 | CRANES - SLEWING JIB CRANES |
| UNI EN 1870-10 : 2013 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES |
| EN 61300-3-4:2013 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-4: Examinations and measurements - Attenuation |
| UNI EN 1870-4 : 2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTIBLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING |
| UNI EN 1870-1 : 2009 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS |
| UNI EN 16237 : 2013 | CLASSIFICATION OF NON-ELECTRICAL SOURCES OF INCOHERENT OPTICAL RADIATION |
| ONORM EN 15061 : 2009 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT |
| EN 61290-11-1:2008 | Optical amplifiers - Test methods - Part 11-1: Polarization mode dispersion parameter - Jones matrix eigenanalysis (JME) |
| UNI EN 12336 : 2009 | TUNNELLING MACHINES - SHIELD MACHINES, THRUST BORING MACHINES, AUGER BORING MACHINES, LINING ERECTION EQUIPMENT - SAFETY REQUIREMENTS |
| UNI EN 14070 : 2009 | SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES |
| UNI EN 13985 : 2009 | MACHINE TOOLS - SAFETY - GUILLOTINE SHEARS |
| UNI EN 13128 : 2009 | SAFETY OF MACHINE TOOLS - MILLING MACHINES (INCLUDING BORING MACHINES) |
| UNI EN 1807 : 2010 | SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES |
| UNI EN 12254 : 2010 | SCREENS FOR LASER WORKING PLACES - SAFETY REQUIREMENTS AND TESTING |
| UNI EN 12717 : 2009 | SAFETY OF MACHINE TOOLS - DRILLING MACHINES |
| UNI EN 1870-5 : 2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 5: CIRCULAR SAWBENCHES/UP-CUTTING CROSS-CUT SAWING MACHINES |
| UNI EN 1218-3 : 2009 | SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 3: HAND FED TENONING MACHINES WITH SLIDING TABLE FOR CUTTING STRUCTURAL TIMBERS |
| UNI EN 13675 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR TUBE FORMING AND ROLLING MILLS AND THEIR FINISHING LINE EQUIPMENT |
| UNI EN 208 : 2010 | PERSONAL EYE-PROTECTION - EYE-PROTECTORS FOR ADJUSTMENT WORK ON LASERS AND LASER SYSTEMS (LASER ADJUSTMENT EYE-PROTECTORS) |
| UNI EN 1870-7:2012 | Safety of woodworking machines - Circular sawing machines - Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading |
| UNI EN 12622 : 2014 | SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES |
| UNI EN 746-1 : 2009 | INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 1: COMMON SAFETY REQUIREMENTS FOR INDUSTRIAL THERMOPROCESSING EQUIPMENT |
| UNI EN 1807-1 : 2013 | SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 1: TABLE BAND SAWS AND BAND RE-SAWS |
| 08/30184608 DC : DRAFT SEP 2008 | BS EN 1640 - DENTISTRY - MEDICAL DEVICES FOR DENTISTRY - EQUIPMENT |
| 10/30227080 DC : DRAFT JUNE 2010 | BS EN 691-1 - SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS |
| BS EN 80601-2-60:2015 | Medical electrical equipment Particular requirements for the basic safety and essential performance of dental equipment |
| DIN EN 16191 E : 2014 | TUNNELLING MACHINERY - SAFETY REQUIREMENTS |
| 13/30283451 DC : 0 | BS EN 60335-2-97:2006/AA - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-97: PARTICULAR REQUIREMENTS FOR DRIVES FOR ROLLING SHUTTERS, AWNINGS, BLINDS AND SIMILAR EQUIPMENT |
| NF EN 13035-11 : 2006 + A1 2010 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 11: DRILLING MACHINES |
| I.S. EN 13035-11:2006 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 11: DRILLING MACHINES |
| DIN EN 1870-19:2014-03 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS |
| BS EN 61300-2-14:2013 | Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Tests. High optical power |
| DIN EN 50241-1 : 2000 AMD 1 2004 | SPECIFICATION FOR OPEN PATH APPARATUS FOR THE DETECTION OF COMBUSTIBLE OR TOXIC GASES AND VAPOURS - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
| I.S. EN 848-3:2012 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES |
| BS EN 61274-1:2012 | Fibre optic interconnecting devices and passive components. Adaptors for fibre optic connectors Generic specification |
| BS EN 1011-6:2005 | Welding. Recommendations for welding of metallic materials Laser beam welding |
| 14/30297842 DC : 0 | BS EN 15163 - MACHINES AND INSTALLATIONS FOR THE EXPLOITATION AND PROCESSING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR DIAMOND WIRE SAWS AND DIAMOND MULTI-WIRE SAWS |
| 07/30169273 DC : 0 | BS EN 61029-2-11 - SAFETY OF TRANSPORTABLE MOTOR - OPERATED ELECTRIC TOOLS - PART 2-11: PARTICULAR REQUIREMENTS FOR COMBINED MITRE AND BENCH SAWS |
| CEI EN 61603-1 : 1998 | TRANSMISSION OF AUDIO AND/OR VIDEO AND RELATED SIGNALS USING INFRA-RED RADIATION - PART 1: GENERAL |
| PREN 848-3 : DRAFT 2010 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOLS - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES |
| CEI EN 62471-5 : 2016 | PHOTOBIOLOGICAL SAFETY OF LAMPS AND LAMP SYSTEMS - PART 5: IMAGE PROJECTORS |
| BS EN 50088:1996 | Safety of electric toys |
| 07/30166811 DC : 0 | BS EN ISO 23125 - SAFETY OF MACHINE TOOLS - TURNING MACHINES |
| 12/30263881 DC : 0 | BS EN 1870-3 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 3: DOWN CUTTING CROSS-CUT SAWS AND DUAL PURPOSE DOWN CUTTING CROSS-CUT SAWS/CIRCULAR SAW BENCHES |
| 09/30175684 DC : 0 | BS EN 14673:2006/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS |
| I.S. EN 12478:2000 | SAFETY OF MACHINE TOOLS - LARGE NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES |
| 09/30178813 DC : 0 | BS EN 1870-13:2007/A1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES |
| I.S. EN 61010-1:2010/A1:2019 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
| BS EN 62115 : 2005 | ELECTRIC TOYS - SAFETY |
| 03/309922 DC : DRAFT JUNE 2003 | CENELEC TS 61496-2 - SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 2: PARTICULAR REQUIREMENTS FOR EQUIPMENT USING ACTIVE OPTO-ELECTRONIC PROTECTIVE DEVICES (AOPD) |
| BS EN 61207-7:2013 | Expression of performance of gas analyzers Tuneable semiconductor laser gas analyzers |
| BS EN 62129-1:2016 | Calibration of wavelength/optical frequency measurement instruments Optical spectrum analyzers |
| 02/564996 DC : DRAFT NOV 2002 | BS EN ISO 16201 - TECHNICAL AIDS FOR DISABLED PERSONS - REMOTE CONTROL SYSTEMS |
| 04/30058509 DC : DRAFT JUNE 2004 | BS EN 14985 - CRANES - SLEWING JIB CRANES |
| 09/30201995 DC : 0 | BS EN 15949 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR BAR MILLS, STRUCTURAL STEEL MILLS AND WIRE ROD MILLS |
| 09/30178356 DC : 0 | BS EN 1870-17:2007/A1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (MANUAL RADIAL ARM SAWS) |
| BS EN 61290-1:2015 | Optical amplifiers. Test methods Power and gain parameters |
| EN 1034-1:2000+A1:2010 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 1: Common requirements |
| BS EN 15163:2017 | Machines and installations for the exploitation and processing of natural stone. Safety. Requirements for diamond wire saws |
| BS EN 415-10:2014 | Safety of packaging machines General Requirements |
| UNE-EN 60065:2015 | Audio, video and similar electronic apparatus - Safety requirements |
| CEI EN 61202-1 : 2010 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC ISOLATORS - PART 1: GENERIC SPECIFICATION |
| BS EN 62522:2014 | Calibration of tuneable laser sources |
| CEI EN 61300-2-14 : 2013 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-14: TESTS - HIGH OPTICAL POWER |
| 14/30304361 DC : 0 | BS EN ISO 11111-1 - TEXTILE MACHINERY - SAFETY REQUIREMENTS - PART 1: COMMON REQUIREMENTS |
| CEI EN 61969-3 : 2012 | MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - OUTDOOR ENCLOSURES - PART 3: ENVIRONMENTAL REQUIREMENTS, TESTS AND SAFETY ASPECTS |
| 12/30258453 DC : 0 | BS EN 62368-1 AMD - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
| I.S. EN 60335-2-97:2007 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-97: PARTICULAR REQUIREMENTS FOR DRIVES FOR ROLLING SHUTTERS, AWNINGS, BLINDS AND SIMILAR EQUIPMENT |
| I.S. EN 62522:2014 | CALIBRATION OF TUNEABLE LASER SOURCES |
| DD ENV 12646:1997 | Bar coding. Test specifications for bar code scanners and decoders |
| BS EN 61300-3-4:2013 | Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Examinations and measurements. Attenuation |
| BS EN 62149-3:2014 | Fibre optic active components and devices. Performance standards Modulator-integrated laser diode transmitters for 2,5-Gbit/s to 40-Gbit/s fibre optic transmission systems |
| 10/30236218 DC : 0 | BS EN 61029-2-11:201X - SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 2-11: PARTICULAR REQUIREMENTS FOR COMBINED MITRE AND BENCH SAWS |
| BS EN 61744:2005 | Calibration of fibre optic chromatic dispersion test sets |
| BS EN 62300:2005 | Consumer audio/video equipment digital interface with plastic optical fibre |
| UNI EN 1870-18 : 2014 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 18: DIMENSION SAWS |
| UNE-EN 1807-2:2013 | Safety of woodworking machines - Band sawing machines - Part 2: Log sawing machines |
| BS EN 62129:2006 | Calibration of optical spectrum analyzers |
| CEI EN 60601-1-1 : 2003 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-1: GENERAL REQUIREMENTS FOR SAFETY - COLLATERAL STANDARD: SAFETY REQUIREMENTS FOR MEDICAL ELECTRICAL SYSTEMS |
| I.S. EN 60335-2-103:2015 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-103: PARTICULAR REQUIREMENTS FOR DRIVES FOR GATES, DOORS AND WINDOWS |
| CEI EN 61850-3 : 2014 | COMMUNICATION NETWORKS AND SYSTEMS FOR POWER UTILITY AUTOMATION - PART 3: GENERAL REQUIREMENTS |
| CEI EN 80601-2-60 : 2016 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-60: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF DENTAL EQUIPMENT |
| I.S. EN 60065:2014 | AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS |
| I.S. EN 60601-2-22:2013 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-22: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF SURGICAL, COSMETIC, THERAPEUTIC AND DIAGNOSTIC LASER EQUIPMENT (IEC 60601-2-22:2007 (EQV) + A1:2012 (EQV)) |
| I.S. EN 62368-1:2014 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS (IEC 62368-1:2014, MODIFIED) |
| I.S. TS 61496-2:2003 | SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 2: PARTICULAR REQUIREMENTS FOR EQUIPMENT USING ACTIVE OPTO-ELECTRONIC PROTECTIVE DEVICES (AOPD) |
| I.S. EN 61969-1:2012 | MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - OUTDOOR ENCLOSURES - PART 1: DESIGN GUIDELINES (IEC 61969-1:2011 (EQV)) |
| I.S. EN 61029-2-5:2011 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 2-5: PARTICULAR REQUIREMENTS FOR BAND SAWS (IEC 61029-2-5:1993, MODIFIED + A1:2001, MODIFIED) |
| I.S. EN 15094:2008 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR COLD FLAT ROLLING MILLS |
| I.S. EN 62300:2005 | CONSUMER AUDIO/VIDEO EQUIPMENT DIGITAL INTERFACE WITH PLASTIC OPTICAL FIBRE |
| I.S. EN 16191:2014 | TUNNELLING MACHINERY - SAFETY REQUIREMENTS |
| I.S. EN 60601-1:2006&A1:2013&AC:2014&A12:2014 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE |
| I.S. EN 16237:2013 | CLASSIFICATION OF NON-ELECTRICAL SOURCES OF INCOHERENT OPTICAL RADIATION |
| I.S. EN 60601-2-40:1999 | MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR SAFETY - SPECIFICATION FOR ELECTROMYOGRAPHS AND EVOKED RESPONSE EQUIPMENT |
| S.R. CEN TR 16040:2010 | PERCEPTION DE TELEPEAGE - EXIGENCES POUR L'USAGE DU DSRC EN URBAIN |
| CEI EN 62496-2-1 : 2012 | OPTICAL CIRCUIT BOARDS - PART 2-1: MEASUREMENTS - OPTICAL ATTENUATION AND ISOLATION |
| I.S. EN 61290-10-5:2014 | OPTICAL AMPLIFIERS - TEST METHODS - PART 10-5: MULTICHANNEL PARAMETERS - DISTRIBUTED RAMAN AMPLIFIER GAIN AND NOISE FIGURE |
| CEI EN 60255-27 : 2014 | MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 27: PRODUCT SAFETY REQUIREMENTS |
| 17/30362673 DC : 0 | BS EN 12978 - INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY DEVICES FOR POWER OPERATED DOORS AND GATES - REQUIREMENTS AND TEST METHODS |
| EN 62368-1:2014/AC:2017-03 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS (IEC 62368-1:2014, MODIFIED) |
| EN 15163:2017 | Machines and installations for the exploitation and processing of natural stone - Safety - Requirements for diamond wire saws |
| CEI EN 60874-1 : 2012 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - CONNECTORS FOR OPTICAL FIBRES AND CABLES - PART 1: GENERIC SPECIFICATION |
| I.S. EN 61010-1:2010 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 1011-6:2006 | WELDING - RECOMMENDATION FOR WELDING OF METALLIC MATERIALS - PART 6: LASER BEAM WELDING |
| I.S. EN 60745-1:2009 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 15011:2011 | CRANES - BRIDGE AND GANTRY CRANES |
| I.S. EN 61300-3-28:2012 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-28: EXAMINATIONS AND MEASUREMENTS - TRANSIENT LOSS (IEC 61300-3-28:2012 (EQV)) |
| DIN EN 14985:2012-05 | Cranes - Slewing jib cranes |
| EN 61280-2-3:2009/corrigendum:2010 | FIBRE OPTIC COMMUNICATION SUBSYSTEM TEST PROCEDURES - PART 2-3: DIGITAL SYSTEMS - JITTER AND WANDER MEASUREMENTS |
| EN 61746-2:2011/AC:2014 | CALIBRATION OF OPTICAL TIME-DOMAIN REFLECTOMETERS (OTDR) - PART 2: OTDR FOR MULTIMODE FIBRES |
| UNE-EN 1915-1:2013 | Aircraft ground support equipment - General requirements - Part 1: Basic safety requirements |
| DIN EN 207:2016-05 (Draft) | PERSONAL EYE-PROTECTION EQUIPMENT - FILTERS AND EYE-PROTECTORS AGAINST LASER RADIATION (LASER EYE-PROTECTORS) |
| DIN EN 617:2011-06 | Continuous handling equipment and systems - Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers (includes Amendment A1:2010) |
| DIN EN 1870-1:2009-08 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS |
| BS EN 60601-1 : 2006 | MEDICAL ELECTRICAL EQUIPMENT PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE |
| BS EN 1870-12:2013 | Safety of woodworking machines. Circular sawing machines Pendulum cross-cut sawing machines |
| ISO 15616-1:2003 | Acceptance tests for CO2-laser beam machines for high quality welding and cutting — Part 1: General principles, acceptance conditions |
| BS EN 13675 : 2004 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR TUBE FORMING AND ROLLING MILLS AND THEIR FINISHING LINE EQUIPMENT |
| BS EN 848-3:2012 | Safety of woodworking machines. One side moulding machines with rotating tool Numerically controlled (NC) boring and routing machines |
| BS EN 1010-1 : 2004 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS |
| BS EN 1218-3 : 2001 | SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 3: HAND FED TENONING MACHINES WITH SLIDING TABLE FOR CUTTING STRUCTURAL TIMBERS |
| BS EN 12840:2001 | Safety of machine tools. Manually controlled turning machines with or without automatic control |
| BS EN 12417 : 2001 | MACHINE TOOLS - SAFETY - MACHINING CENTRES |
| BS EN 1870-1 : 2007 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS |
| 17/30357380 DC : 0 | BS EN 15011 - CRANES - BRIDGE AND GANTRY CRANES |
| UNE-EN 60825-2:2005 | Safety of laser products -- Part 2: Safety of optical fibre communication systems (OFCS) |
| BS EN 12336 : 2005 | TUNNELLING MACHINES - SHIELD MACHINES, THRUST BORING MACHINES, AUGER BORING MACHINES, LINING ERECTION EQUIPMENT - SAFETY REQUIREMENTS |
| BS EN 14255-2:2005 | Measurement and assessment of personal exposures to incoherent optical radiation Visible and infrared radiation emitted by artificial sources in the workplace |
| BS EN ISO 11073-30300:2005 | Health informatics. Point-of-care medical device communication Transport profile. Infrared wireless |
| EN 80601-2-60:2015 | Medical electrical equipment - Part 2-60: Particular requirements for the basic safety and essential performance of dental equipment |
| BS EN 12717 : 2001 | SAFETY OF MACHINE TOOLS - DRILLING MACHINES |
| BS EN 14255-1:2005 | Measurement and assessment of personal exposures to incoherent optical radiation Ultraviolet radiation emitted by artifical sources in the workplace |
| UNE-EN 1870-15:2013 | Safety of woodworking machines - Circular sawing machines - Part 15: Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading |
| BS EN 1807 : 1999 | SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES |
| UNE-EN 12622:2011 | Safety of machine tools - Hydraulic press brakes |
| BS EN 14985:2012 | Cranes. Slewing jib cranes |
| BS EN 12978 : 2003 | INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY DEVICES FOR POWER OPERATED DOORS AND GATES - REQUIREMENTS AND TEST METHODS |
| BS EN 13985 : 2003 | MACHINE TOOLS - SAFETY - GUILLOTINE SHEARS |
| BS EN 1870-3:2014 | Safety of woodworking machines. Circular sawing machines Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches |
| BS EN 1870-11:2013 | Safety of woodworking machines. Circular sawing machines Semi automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws) |
| ISO/IEEE 11073-30300:2004 | Health informatics — Point-of-care medical device communication — Part 30300: Transport profile — Infrared wireless |
| BS EN 1870-4:2012 | Safety of woodworking machines. Circular sawing machines Multiblade rip sawing machines with manual loading and/or unloading |
| BS EN 207:2017 | Personal eye-protection equipment. Filters and eye-protectors against laser radiation (laser eye-protectors) |
| ISO 11111-1:2016 | Textile machinery Safety requirements Part 1: Common requirements |
| BS EN 14070 : 2003 | SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES |
| BS EN 1870-13 : 2007 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES |
| BS EN 60950-1 : 2006 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
| BS EN 12415:2001 | Safety of machine tools. Small numerically controlled turning machines and turning centres |
| UNE-EN 617:2002 | Continuous handling equipment and systems- Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers. |
| UNE-EN 62115:2006 | Electric toys - Safety (IEC 62115:2003 + A1:2004, modified) |
| BS EN 13788:2002 | Machine tools. Safety. Multi-spindle automatic turning machines |
| BS EN 15011 : 2011 | CRANES - BRIDGE AND GANTRY CRANES |
| 10/30218104 DC : 0 | BS EN 15011 - CRANES - BRIDGE & GANTRY CRANES |
| UNE-EN 1870-9:2013 | Safety of woodworking machines - Circular sawing machines - Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading |
| UNE-EN 61300-3-4:2014 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-4: Examinations and measurements - Attenuation |
| UNE-EN ISO 11111-1:2016 | Textile machinery - Safety requirements - Part 1: Common requirements (ISO 11111-1:2016) |
| BS EN 1870-5 : 2002 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 5: CIRCULAR SAW BENCHES/UP-CUTTING CROSS-CUT SAWING MACHINES |
| BS EN 62841-1:2015 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety General requirements |
| EN 14255-1:2005 | Measurement and assessment of personal exposures to incoherent optical radiation - Part 1: Ultraviolet radiation emitted by artificial sources in the workplace |
| EN 691-1:2012 | Safety of woodworking machines - Part 1: Common requirements |
| ENV 12646 : 1997 | BAR CODING - TEST SPECIFICATIONS FOR BAR CODE SCANNERS AND DECODERS |
| EN 13788 : 2001 | MACHINE TOOLS - SAFETY - MULTI-SPINDLE AUTOMATIC TURNING MACHINES |
| EN 207:2017 | Personal eye-protection equipment - Filters and eye-protectors against laser radiation (laser eye-protectors) |
| EN 415-10:2014 | Safety of packaging machines - Part 10: General Requirements |
| EN 13675:2004+A1:2010 | Safety of machinery - Safety requirements for tube forming and rolling mills and their finishing line equipment |
| EN 16237:2013 | Classification of non-electrical sources of incoherent optical radiation |
| EN ISO 11111-1:2016 | Textile machinery - Safety requirements - Part 1: Common requirements (ISO 11111-1:2016) |
| EN 14656:2006+A1:2010 | Safety of machinery - Safety requirements for extrusion presses for steel and non-ferrous metals |
| EN ISO 15616-1:2003 | Acceptance tests for CO2-laser beam machines for high quality welding and cutting - Part 1: General principles, acceptance conditions (ISO 15616-1:2003) |
| EN 1915-1:2013 | Aircraft ground support equipment - General requirements - Part 1: Basic safety requirements |
| EN 14985:2012 | Cranes - Slewing jib cranes |
| EN 15094:2008 | Safety of Machinery - Safety requirements for cold flat rolling mills |
| EN ISO 11073-30300:2005 | Health informatics - Point-of-care medical device communication - Part 30300: Transport profile - Infrared wireless (ISO/IEEE 11073-30300:2004) |
| EN 15949:2012 | Safety of machinery - Safety requirements for bar mills, structural steel mills and wire rod mills |
| EN 1870-13:2007+A2:2012 | Safety of woodworking machines - Circular sawing machines - Part 13: Horizontal beam panel sawing machines |
| EN 746-1:1997+A1:2009 | Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment |
| EN 1807:1999+A1:2009 | Safety of woodworking machines - Band sawing machines |
| EN 1649:2004 | AIDC technologies - Operational aspects affecting the reading of bar code symbols |
| EN 15093:2008 | Safety of Machinery - Safety requirements for hot flat rolling mills |
| EN 1870-2:1999/AC:2002 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 2: HORIZONTAL BEAM PANEL SAWS AND VERTICAL PANEL SAWS |
| ENV 12648 : 1997 | BAR CODING - TEST SPECIFICATIONS FOR BAR CODE PRINTERS |
| EN 1870-3:2014 | Safety of woodworking machines - Circular sawing machines - Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches |
| EN 1870-18:2013 | Safety of woodworking machines - Circular sawing machines - Part 18: Dimension saws |
| EN 1640:2009 | Dentistry - Medical devices for dentistry - Equipment |
| EN 1807-2:2013 | Safety of woodworking machines - Band sawing machines - Part 2: Log sawing machines |
| EN 1870-1:2007+A1:2009 | Safety of woodworking machines - Circular sawing machines - Part 1: Circular saw benches (with and without sliding table), dimension saws and building site saws |
| EN 1870-5 : 2002 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 5: CIRCULAR SAWBENCHES/UP-CUTTING CROSS-CUT SAWING MACHINES |
| EN 1870-7:2012 | Safety of woodworking machines - Circular sawing machines - Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading |
| EN 1870-19:2013 | Safety of woodworking machines - Circular sawing machines - Part 19: Circular saw benches (with and without sliding table) and building site saws |
| EN 14673:2006+A1:2010 | Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals |
| EN 12978:2003+A1:2009 | Industrial, commercial and garage doors and gates - Safety devices for power operated doors and gates - Requirements and test methods |
| EN 1870-17:2012+A1:2015 | Safety of woodworking machines - Circular sawing machines - Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit (radial arm saws) |
| EN 14033-3:2017 | Railway applications - Track - Railbound construction and maintenance machines - Part 3: General safety requirements |
| EN 1870-8:2012 | Safety of woodworking machines - Circular sawing machines - Part 8: Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading |
| EN 1870-4:2012 | Safety of woodworking machines - Circular sawing machines - Part 4: Multiblade rip sawing machines with manual loading and/or unloading |
| EN ISO 11149 : 1997 | OPTICS AND OPTICAL INSTRUMENTS - LASERS AND LASER-RELATED EQUIPMENT - FIBRE OPTIC CONNECTORS FOR NON-TELECOMMUNICATION LASER APPLICATIONS |
| EN 848-3:2012 | Safety of woodworking machines - One side moulding machines with rotating tool - Part 3: Numerically controlled (NC) boring and routing machines |
| EN 1870-12:2013 | Safety of woodworking machines - Circular sawing machines - Part 12: Pendulum cross-cut sawing machines |
| EN 14255-2:2005 | Measurement and assessment of personal exposures to incoherent optical radiation - Part 2: Visible and infrared radiation emitted by artificial sources in the workplace |
| EN 1870-10:2013 | Safety of woodworking machines - Circular sawing machines - Part 10: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines |
| EN 1870-9:2012 | Safety of woodworking machines - Circular sawing machines - Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading |
| PREN 61029-2-5 : DRAFT 2011 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 2-5: PARTICULAR REQUIREMENTS FOR BAND SAWS |
| DD CLC/TS 61496-2:2006 | Safety of machinery. Electro-sensitive protective equipment Particular requirements for equipment using active opto-electronic protective devices (AOPDs) |
| BS EN 691-1:2012 | Safety of woodworking machines Common requirements |
| BS EN 62134-1:2009 | Fibre optic interconnecting devices and passive components. Fibre optic closures Generic specification |
| UNE-EN 61029-2-11:2013 | Safety of transportable motor-operated electric tools - Part 2-11: Particular requirements for combined mitre and bench saws |
| DIN EN 691-1:2013-01 | SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS |
| BS EN 61300-3-53:2015 | Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Examinations and measurements. Encircled angular flux (EAF) measurement method based on two-dimensional far field data from step index multimode waveguide (including fibre) |
| 03/119040 DC : DRAFT NOV 2003 | PREN 1010-1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS |
| BS EN 1870-18:2013 | Safety of woodworking machines. Circular sawing machines Dimension saws |
| BS EN 61280-1-3:2010 | Fibre optic communication subsystem test procedures General communication subsystems. Central wavelength and spectral width measurement |
| I.S. EN 1870-1:2007 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS |
| 04/30111093 DC : DRAFT MARCH 2004 | EN 14255-2 - MEASUREMENT AND ASSESSMENT OF PERSONAL EXPOSURES TO INCOHERENT OPTICAL RADIATIONBUSTION ENGINE POWERED DEVICES - PART 2 - VISIBLE AND INFRARED RADIATION EMITTED BY ARTIFICIAL SOURCES IN THE WORKPLACE |
| UNE-EN 60079-28:2016 | Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation |
| I.S. EN 1870-13:2007 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES |
| CEI EN 61969-1 : 2012 | MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - OUTDOOR ENCLOSURES - PART 1: DESIGN GUIDELINES |
| I.S. EN 60728-13:2010 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 13: OPTICAL SYSTEMS FOR BROADCAST SIGNAL TRANSMISSIONS |
| EN 60601-1-1:2001 | Medical electrical equipment - Part 1-1: General requirements for safety - Collateral standard: Safety requirements for medical electrical systems |
| I.S. EN 62471-5:2015 | PHOTOBIOLOGICAL SAFETY OF LAMPS AND LAMP SYSTEMS - PART 5: IMAGE PROJECTORS |
| BS EN 61290-1-3:2015 | Optical amplifiers. Test methods Power and gain parameters. Optical power meter method |
| 09/30180832 DC : DRAFT AUG 2009 | BS EN 13675 AMD1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR TUBE FORMING AND ROLLING MILLS AND FINISHING LINE EQUIPMENT |
| S.R. CLC/TS 61496-3:2008 | SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 3: PARTICULAR REQUIREMENTS FOR ACTIVE OPTO-ELECTRONIC PROTECTIVE DEVICES RESPONSIVE TO DIFFUSE REFLECTION (AOPDDR) |
| 03/301332 DC : DRAFT JAN 2003 | ISO 12649 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR BINDING AND FINISHING SYSTEMS AND EQUIPMENT |
| BS EN 61746-2:2011 | Calibration of optical time-domain reflectometers (OTDR) OTDR for multimode fibres |
| BS EN 61850-3:2014 | Communication networks and systems for power utility automation General requirements |
| I.S. EN 62149-2:2014 | FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 2: 850 NM DISCRETE VERTICAL CAVITY SURFACE EMITTING LASER DEVICES |
| DIN EN 14033-3:2014-08 (Draft) | RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS |
| BS EN 61029-2-1:2012 | Safety of transportable motor-operated electric tools Particular requirements for circular saw benches |
| UNE-EN 1870-18:2013 | Safety of woodworking machines - Circular sawing machines - Part 18: Dimension saws |
| BS EN 61073-1:2009 | Fibre optic interconnecting devices and Passive components. Mechanical splices and fusion splice protectors for optical fibres and cables Generic specification |
| 09/30178322 DC : DRAFT JAN 2009 | BS EN 1870-4 AMD1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTIBLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING |
| BS EN 60728-6:2011 | Cable networks for television signals, sound signals and interactive services Optical equipment |
| I.S. EN 12417:2001 | MACHINE TOOLS - SAFETY - MACHINING CENTRES |
| 09/30182299 DC : 0 | BS EN 1010-2:2006/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 2: PRINTING AND VARNISHING MACHINES INCLUDING PRE-PRESS MACHINERY |
| I.S. EN 14033-3:2017 | RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS |
| PREN 207 : DRAFT 2016 | PERSONAL EYE-PROTECTION EQUIPMENT - FILTERS AND EYE-PROTECTORS AGAINST LASER RADIATION (LASER EYE-PROTECTORS) |
| 09/30178340 DC : 0 | BS EN 1870-10:2003/A1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES |
| I.S. EN 80601-2-60:2015 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-60: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF DENTAL EQUIPMENT |
| I.S. EN 61744:2006 | CALIBRATION OF FIBRE OPTIC CHROMATIC DISPERSION TEST SETS |
| BS EN 60874-1:2012 | Fibre optic interconnecting devices and passive components. Connectors for optical fibres and cables Generic specification |
| IEC 60950:1999 | Safety of information technology equipment |
| CEI EN 60728-11 : 2014 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 11: SAFETY |
| CEI EN 62149-5 : 2012 | FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 5: ATM-PON TRANSCEIVERS WITH LD DRIVER AND CDR ICS |
| I.S. EN 1807-1:2013 | SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 1: TABLE BAND SAWS AND BAND RE-SAWS |
| I.S. EN 62149-8:2014 | FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 8: SEEDED REFLECTIVE SEMICONDUCTOR OPTICAL AMPLIFIER DEVICES |
| I.S. EN 62150-1:2005 | FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - TEST AND MEASUREMENT PROCEDURES - PART 1: GENERAL AND GUIDANCE |
| I.S. EN 60876-1:2014 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC SPATIAL SWITCHES - PART 1: GENERIC SPECIFICATION |
| I.S. EN 61496-2:2013 | SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 2: PARTICULAR REQUIREMENTS FOR EQUIPMENT USING ACTIVE OPTO-ELECTRONIC PROTECTIVE DEVICES (AOPDS) |
| CEI EN 62134-1 : 2011 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CLOSURES - PART 1: GENERIC SPECIFICATION |
| I.S. EN 60728-14:2014 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 14: OPTICAL TRANSMISSION SYSTEMS USING RFOG TECHNOLOGY |
| I.S. EN 62149-9:2014 | FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 9: SEEDED REFLECTIVE SEMICONDUCTOR OPTICAL AMPLIFIER TRANSCEIVERS |
| I.S. EN 61274-1:2012 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - ADAPTORS FOR FIBRE OPTIC CONNECTORS - PART 1: GENERIC SPECIFICATION (IEC 61274-1:2011 (EQV)) |
| I.S. EN 61290-11-1:2008 | OPTICAL AMPLIFIERS - TEST METHODS - PART 11-1: POLARIZATION MODE DISPERSION PARAMETER - JONES MATRIX EIGENANALYSIS (JME) |
| I.S. EN 1870-19:2013 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS |
| CEI EN 60601-2-40 : 1999 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-40: PARTICULAR REQUIREMENTS FOR THE SAFETY OF ELECTROMYOGRAPHS AND EVOKED RESPONSE EQUIPMENT |
| UNE-EN 61300-1:2017 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 1: General and guidance |
| ASTM E 2982 : 2014 | Standard Guide for Nondestructive Testing of Thin-Walled Metallic Liners in Filament-Wound Pressure Vessels Used in Aerospace Applications |
| TS 105 175-1 : 2.0.0 | ACCESS, TERMINALS, TRANSMISSION AND MULTIPLEXING (ATTM); PLASTIC OPTICAL FIBRE SYSTEM SPECIFICATIONS FOR 100 MBIT/S AND 1 GBIT/S |
| BS EN 16844 : 2017 | AESTHETIC MEDICINE SERVICES - NON-SURGICAL MEDICAL TREATMENTS |
| I.S. EN 61300-2-14:2013 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-14: TESTS - HIGH OPTICAL POWER (IEC 61300-2-14:2012 (EQV)) |
| DIN EN 1870-4:2012-06 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTIBLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING |
| I.S. EN 60079-29-4:2010 | EXPLOSIVE ATMOSPHERES - PART 29-4: GAS DETECTORS - PERFORMANCE REQUIREMENTS OF OPEN PATH DETECTORS FOR FLAMMABLE GASES |
| I.S. EN 50241-1:1999 | SPECIFICATION FOR OPEN PATH APPARATUS FOR THE DETECTION OF COMBUSTIBLE OR TOXIC GASES AND VAPOURS - GENERAL REQUIREMENTS AND TEST METHODS |
| I.S. EN 60519-1:2015 | SAFETY IN INSTALLATIONS FOR ELECTROHEATING AND ELECTROMAGNETIC PROCESSING - PART 1: GENERAL REQUIREMENTS |
| EN 61207-7:2013/AC:2015 | EXPRESSION OF PERFORMANCE OF GAS ANALYZERS - PART 7: TUNEABLE SEMICONDUCTOR LASER GAS ANALYZERS (IEC 61207-7:2013) |
| DIN EN 1870-5:2013-01 | Safety of woodworking machines - Circular sawing machines - Part 5: Circular saw benches/up-cutting cross-cut sawing machines (includes Amendment A2:2012) |
| BS EN 1870-8:2012 | Safety of woodworking machines. Circular sawing machines Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading |
| BS EN 14656 : 2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS |
| BS EN 208:2009 | Personal eye-protection. Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors) |
| BS EN 60825-4 : 2006 | SAFETY OF LASER PRODUCTS - PART 4: LASER GUARDS |
| BS EN 1915-1:2013 | Aircraft ground support equipment. General requirements Basic safety requirements |
| BS EN ISO 11149:1997 | Optics and optical instruments. Lasers and laser related equipment. Fibre optic connectors for non-telecommunication laser applications |
| BS EN 60825-2 : 2004 | SAFETY OF LASER PRODUCTS - PART 2: SAFETY OF OPTICAL FIBRE COMMUNICATION SYSTEMS (OFCS) |
| BS EN 617 : 2001 | |
| BS EN 1870-17 : 2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS) |
| EN 61300-2-14:2013 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-14: Tests - High optical power |
| EN 61029-2-9:2012/A11:2013 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 2-9: PARTICULAR REQUIREMENTS FOR MITRE SAWS (IEC 61029-2-9:1995, MODIFIED) |
| EN 12415:2000/A1:2002 | SAFETY OF MACHINE TOOLS - SMALL NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES |
| EN 61290-10-5:2014 | Optical amplifiers - Test methods - Part 10-5: Multichannel parameters - Distributed Raman amplifier gain and noise figure |
| EN 61496-3:2001 | Safety of machinery - Electro-sensitive protective equipment - Part 3: Particular requirements for Active Opto-electronic Protective Devices responsive to Diffuse Reflection (AOPDDR) |
| EN 61290-10-1:2009 | Optical amplifiers - Test methods - Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer |
| EN 62074-1:2014 | Fibre optic interconnecting devices and passive components - Fibre optic WDM devices - Part 1: Generic specification |
| EN 61757-1:2012 | Fibre optic sensors - Part 1: Generic specification |
| EN 60335-2-103:2015 | Household and similar electrical appliances - Safety - Part 2-103: Particular requirements for drives for gates, doors and windows |
| EN 61300-1:2016 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 1: General and guidance |
| EN 62841-1:2015/AC:2015 | ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| EN 13035-11:2006+A1:2010 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 11: Drilling machines |
| EN 61744:2005 | Calibration of fibre optic chromatic dispersion test sets |
| EN 62496-2-1:2011 | Optical circuit boards - Part 2-1: Measurements - Optical attenuation and isolation |
| EN 61290-3-2:2008 | Optical amplifiers - Test methods - Part 3-2: Noise figure parameters - Electrical spectrum analyzer method |
| EN 62149-4:2010 | Fibre optic active components and devices - Performance standards - Part 4: 1 300 nm fibre optic transceivers for Gigabit Ethernet application |
| EN 62115:2005/A12:2015 | ELECTRIC TOYS - SAFETY (IEC 62115:2003 + A1:2004, MODIFIED) |
| EN 60728-6:2011 | Cable networks for television signals, sound signals and interactive services - Part 6: Optical equipment |
| EN 50512:2009 | Electrical installations for lighting and beaconing of aerodromes - Advanced Visual Docking Guidance Systems (A-VDGS) |
| DIN EN 208:2010-04 | Personal eye-protection - Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors) |
| EN 60335-2-97:2006/A12:2015 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-97: PARTICULAR REQUIREMENTS FOR DRIVES FOR ROLLING SHUTTERS, AWNINGS, BLINDS AND SIMILAR EQUIPMENT |
| EN 62150-1:2005 | Fibre optic active components and devices - Test and measurement procedures - Part 1: General and guidance |
| EN 62149-2:2014 | Fibre optic active components and devices - Performance standards - Part 2: 850 nm discrete vertical cavity surface emitting laser devices |
| EN 61274-1:2012 | Fibre optic interconnecting devices and passive components - Adaptors for fibre optic connectors - Part 1: Generic specification |
| EN 50083-6:1997 | Cable networks for television signals, sound signals and interactive services - Part 6: Optical equipment |
| EN 12840 : 2001 | SAFETY OF MACHINE-TOOLS - MANUALLY CONTROLLED TURNING MACHINES WITH OR WITHOUT AUTOMATIC CONTROL |
| EN 208 : 1998 | PERSONAL EYE-PROTECTION - EYE-PROTECTORS FOR ADJUSTMENT WORK ON LASERS AND LASER SYSTEMS (LASER ADJUSTMENT EYE-PROTECTORS) |
| EN 60950:2000/corrigendum:2002 | SAFETY OF INFORMATION TECHNOLOGY EQUIPMENT |
| EN 62522:2014 | Calibration of tuneable laser sources |
| EN 60825-12:2004 | Safety of laser products - Part 12: Safety of free space optical communication systems used for transmission of information |
| DIN EN 14255-2:2006-03 | Measurement and assessment of personal exposures to incoherent optical radiation - Part 2: Visible and infrared radiation emitted by artificial sources in the workplace |
| EN 60876-1:2014 | Fibre optic interconnecting devices and passive components - Fibre optic spatial switches - Part 1: Generic specification |
| EN 61073-1:2009 | Fibre optic interconnecting devices and passive components - Mechanical splices and fusion splice protectors for optical fibres and cables - Part 1: Generic specification |
| EN 62149-9:2014 | Fibre optic active components and devices - Performance standards - Part 9: Seeded reflective semiconductor optical amplifier transceivers |
| EN 62471-5:2015 | Photobiological safety of lamps and lamp systems - Part 5: Image projectors |
| UNI EN 15011 : 2014 | CRANES - BRIDGE AND GANTRY CRANES |
| UNE-EN 746-1:1997 | INDUSTRIAL THERMOPROCESSING EQUIPMENT. PART 1: COMMON SAFETY REQUIREMENTS FOR INDUSTRIAL THERMOPROCESSING EQUIPMENT. |
| UNE-EN 1870-17:2013 | Safety of woodworking machines - Circular sawing machines - Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit (radial arm saws) |
| UNE-EN 15011:2011 | Cranes - Bridge and gantry cranes |
| UNE-EN 1870-5:2003 | Safety of woodworking machines - Circular sawing machines - Part 5: Circular sawbenches/up-cutting cross-cut sawing machines. |
| OVE/ONORM EN 61744 : 2006 | CALIBRATION OF FIBRE OPTIC CHROMATIC DISPERSION TEST SETS |
| IEC TR 60825-9:1999 | Safety of laser products - Part 9: Compilation of maximum permissible exposure to incoherent optical radiation |
| IEC 60825-2:2004+AMD1:2006+AMD2:2010 CSV | Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCS) |
| IEC TR 60825-13:2011 | Safety of laser products - Part 13: Measurements for classification of laser products |
| ISO 11146-1:2005 | Lasers and laser-related equipment Test methods for laser beam widths, divergence angles and beam propagation ratios Part 1: Stigmatic and simple astigmatic beams |
| ISO 13694:2015 | Optics and photonics Lasers and laser-related equipment Test methods for laser beam power (energy) density distribution |
| IEC 60825-4:2006+AMD1:2008+AMD2:2011 CSV | Safety of laser products - Part 4: Laser guards |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| IEC 60825-12:2004 | Safety of laser products - Part 12: Safety of free space optical communication systems used for transmission of information |
| ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
| IEC 60027-1:1992 | Letters symbols to be used in electrical technology - Part 1: General |
| IEC 60601-2-22:2007+AMD1:2012 CSV | Medical electrical equipment - Part 2-22: Particular requirements for basic safety and essential performance of surgical, cosmetic, therapeutic and diagnostic laser equipment |
| IEC TR 60825-8:2006 | Safety of laser products - Part 8: Guidelines for the safe use of laser beams on humans |
| IEC TR 60825-14:2004 | Safety of laser products - Part 14: A user's guide |
| IEC 62115:2017 | Electric toys - Safety |
| IEC TR 60825-3:2008 | Safety of laser products - Part 3: Guidance for laser displays and shows |
| IEC 60079-0:2011 | Explosive atmospheres - Part 0: Equipment - General requirements |
| ISO 15004-2:2007 | Ophthalmic instruments — Fundamental requirements and test methods — Part 2: Light hazard protection |
| ISO 80000-1:2009 | Quantities and units — Part 1: General |
| IEC TR 60825-5:2003 | Safety of laser products - Part 5: Manufacturer's checklist for IEC 60825-1 |
| IEC 61010-1:2010+AMD1:2016 CSV | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements |
| IEC 62368-1:2014 | Audio/video, information and communication technology equipment - Part 1: Safety requirements |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.