EN 60794-3:2015
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Optical fibre cables - Part 3: Sectional specification - Outdoor cables
Superseded date
08-04-2022
Superseded by
Published date
16-01-2015
Sorry this product is not available in your region.
FOREWORD
1 Scope
2 Normative references
3 Terms, definitions, symbols and abbreviations
4 Optical fibre
5 Cable element
6 Optical fibre cable construction
7 Installation and operating conditions
8 Characterization of cable elements
9 Optical fibre cable tests
10 Quality assurance
Bibliography
Annex ZA (normative) - Normative references to
international publications with their
corresponding European publications
IEC 60794-3:2014 specifies the requirements for optical fibre cables and cable elements which are intended to be used externally in communications networks. Other types of applications requiring similar types of cables can be considered. Requirements for cables to be used in ducts, for directly buried applications, aerial cables and cables for lake and river crossings are included in this standard. Also included are cables for specialized use in sewers and in water and gas pipes. For aerial application, this standard does not cover all functional aspects of cables installed in the vicinity of overhead power lines. For such applications, additional requirements and test methods may be necessary. Moreover, this standard excludes optical ground wires and cables attached to the phase or earth conductors of overhead power lines. For cables for lake and river crossings, this standard does not cover methods of cable repair, nor repair capability, nor does it cover cables for use with underwater line amplifiers. This fourth edition cancels and replaces the third edition, published in 2001, and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:- the specification has been streamlined by cross-referencing with IEC 60794-1-1;- soft strippable tubes introduced into the "polymeric" tube heading and metal tubes have been added;- ribbon clauses have been simplified;- more precise outer sheath details have been added;- cable element tests and cable tests have been simplified by the use of tables instead of text;- Annex A on PMD has been removed, to avoid duplication with IEC TR 61282-3.Keywords: outdoor cables, requirements for optical fibre cables and cable elements
| Committee |
CLC/TC 86A
|
| DevelopmentNote |
Supersedes EN 187100. (03/2004)
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NF EN 60794-3 : 2015 | Identical |
| IEC 60794-3:2014 | Identical |
| NBN EN 60794-3 : 2015 | Identical |
| NEN EN IEC 60794-3 : 2015 | Identical |
| I.S. EN 60794-3:2002 | Identical |
| PN EN 60794-3 : 2015 | Identical |
| DIN EN 60794-3 : 2015 | Identical |
| UNE-EN 60794-3:2015 | Identical |
| BS EN 60794-3:2015 | Identical |
| CEI EN 60794-3 : 2015 | Identical |
| OVE/ONORM EN 60794-3 : 2016 | Identical |
| EN IEC 60794-3:2022 | Identical |
| VDE 0888-108 : 2015 | Identical |
| PNE-FprEN 60794-3 | Identical |
| SN EN 60794-3:2015 | Identical |
| CLC/TS 50430:2005 | Optical fibre cables - Gas pipe cables - Family specification for cables to be installed in high pressure gas pipes |
| 15/30272336 DC : 0 | BS EN 50411-3-4 - FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-4: FIBRE MANAGEMENT SYSTEM, MODULAR SPLICE AND CONNECTOR WALL BOX, FOR CATEGORY C & A |
| CEI EN 61869-6 : 1ED 2017 | INSTRUMENT TRANSFORMERS - PART 6: ADDITIONAL GENERAL REQUIREMENTS FOR LOW-POWER INSTRUMENT TRANSFORMERS |
| DIN EN 50173:2000-07 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS |
| DD CLC/TS 50429:2005 | Optical fibre cables. Sewer cables. Family specification for cables to be installed in storm and sanitary sewers |
| BS EN 60794-1-3:2017 | Optical fibre cables Generic specification. Optical cable elements |
| BS EN 60794-3-60:2008 | Optical fibre cables Outdoor cables. Family specification for drinking water pipe cables and subducts for installation by blowing and/or pulling/dragging/floating in drinking water pipes |
| CLC/TS 50429:2005 | Optical fibre cables - Sewer cables - Family specification for cables to be installed in storm and sanitary sewers |
| CEI CLC/TS 50430 : 2005 | OPTICAL FIBRE CABLES - GAS PIPE CABLES - FAMILY SPECIFICATION FOR CABLES TO BE INSTALLED IN HIGH PRESSURE GAS PIPES |
| CEI CLC/TS 50431 : 2005 | OPTICAL FIBRE CABLES - DRINKING WATER PIPE CABLES - FAMILY SPECIFICATION FOR CABLES TO BE INSTALLED IN DRINKING WATER PIPES |
| I.S. EN 60794-3-10:2015 | OPTICAL FIBRE CABLES - PART 3-10: OUTDOOR CABLES - FAMILY SPECIFICATION FOR DUCT, DIRECTLY BURIED AND LASHED AERIAL OPTICAL TELECOMMUNICATION CABLES |
| BS EN 187104:2001 | Harmonized system of quality assessment for electronic components. Family specification. Single-mode optical fibre cables to beused as underwater cables for lakes and river crossings, etc |
| CEI CLC/TS 50429 : 2005 | OPTICAL FIBRE CABLES - SEWER CABLES - FAMILY SPECIFICATION FOR CABLES TO BE INSTALLED IN STORM AND SANITARY SEWERS |
| CEI EN 60794-1-23 : 2013 | OPTICAL FIBRE CABLES - PART 1-23: GENERIC SPECIFICATION - BASIC OPTICAL CABLE TEST PROCEDURES - CABLE ELEMENT TEST METHODS |
| DIN EN 187102 : 1996 | FAMILY SPECIFICATION: OPTICAL AERIAL TELECOMMUNICATION CABLES |
| EN 60794-1-3:2017 | Optical fibre cables - Part 1-3: Generic specification - Optical cable elements |
| I.S. EN 60794-5:2016 | OPTICAL FIBRE CABLES - PART 5: SECTIONAL SPECIFICATION - MICRODUCT CABLING FOR INSTALLATION BY BLOWING |
| I.S. EN 60794-3-70:2016 | OPTICAL FIBRE CABLES - PART 3-70: OUTDOOR CABLES - FAMILY SPECIFICATION FOR OUTDOOR OPTICAL FIBRE CABLES FOR RAPID/MULTIPLE DEPLOYMENT |
| I.S. EN 61869-6:2016 | INSTRUMENT TRANSFORMERS - PART 6: ADDITIONAL GENERAL REQUIREMENTS FOR LOW-POWER INSTRUMENT TRANSFORMERS |
| I.S. CLC TS 50431:2005 | OPTICAL FIBRE CABLES - DRINKING WATER PIPE CABLES - FAMILY SPECIFICATION FOR CABLES TO BE INSTALLED IN DRINKING WATER PIPES |
| EN 60794-3-60:2008 | Optical fibre cables - Part 3-60: Outdoor cables - Family specification for drinking water pipe cables and subducts for installation by blowing and/or pulling/dragging/floating in drinking water pipes |
| EN 60794-2-20:2014 | Optical fibre cables - Part 2-20: Indoor cables - Family specification for multi-fibre optical cables |
| EN 60794-5:2016 | Optical fibre cables - Part 5: Sectional specification - Microduct cabling for installation by blowing |
| EN 60794-3-50 : 2008 | OPTICAL FIBRE CABLES - PART 3-50: OUTDOOR CABLES - FAMILY SPECIFICATION FOR GAS PIPE CABLES AND SUBDUCTS FOR INSTALLATION BY BLOWING AND/OR PULLING/DRAGGING IN GAS PIPES |
| EN 60794-5-20:2014 | Optical fibre cables - Part 5-20: Family specification - Outdoor microduct fibre units, microducts and protected microducts for installation by blowing |
| EN 60794-4:2003 | Optical fibre cables - Part 4: Sectional specification - Aerial optical cables along electrical power lines |
| EN 61753-111-9:2010 | Fibre optic interconnecting devices and passive components - Performance standard - Part 111-9: Sealed closures for category S - Subterranean |
| EN 50516-2-1:2011 | INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-1: TYPE ODVA PC INDUSTRIAL TERMINATED ON EN 60793-2-10 CATEGORY A1A AND A1B MULTIMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY 1 (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN EN 50173-1 AND IEC 61753-1-3 |
| EN 61869-6:2016 | Instrument transformers - Part 6: Additional general requirements for low-power instrument transformers |
| EN 61753-101-3:2008 | Fibre optic interconnecting devices and passive components performance standard - Part 101-3: Fibre management systems for Category U - Uncontrolled environment |
| EN 60794-1-23:2012 | OPTICAL FIBRE CABLES - PART 1-23: GENERIC SPECIFICATION - BASIC OPTICAL CABLE TEST PROCEDURES - CABLE ELEMENT TEST METHODS (IEC 60794-1-23:2012) |
| EN 60794-2-30:2008 | Optical fibre cables - Part 2-30: Indoor cables - Family specification for ribbon cables |
| EN 61753-111-7:2010 | Fibre optic interconnecting devices and passive components - Performance standard - Part 111-7: Sealed closures for category A - Aerial |
| EN 187101:1995 | Family Specification: Optical telecommunication cables to be used in ducts or direct buried application |
| EN 187200:2001 | Sectional Specification: Optical cables to be used along electrical power lines (OCEPL) |
| EN 187104:2001 | Family specification - Single-mode optical fibre cables to be used as underwater cables for lakes and river crossings etc. |
| BS EN 61869-6:2016 | Instrument transformers Additional general requirements for low-power instrument transformers |
| BS EN 60794-5-10:2014 | Optical fibre cables Family specification. Outdoor microduct optical fibre cables, microducts and protected microducts for installation by blowing |
| BS EN 187200:2001 | Harmonized systems of quality assessment for electronic components. Sectional specificaton. Optical cables to be used along electrical power lines (OCEPL) |
| DIN EN 187101 : 1996 | FAMILY SPECIFICATION: OPTICAL TELECOMMUNICATION CABLES TO BE USED IN DUCTS OR DIRECT BURIED APPLICATION |
| I.S. EN 60794-3-12:2013 | OPTICAL FIBRE CABLES - PART 3-12: OUTDOOR CABLES - DETAILED SPECIFICATION FOR DUCT AND DIRECTLY BURIED OPTICAL TELECOMMUNICATION CABLES FOR USE IN PREMISES CABLING (IEC 60794-3-12:2012 (EQV)) |
| BS EN 61753-111-7:2010 | Fibre optic interconnecting devices and passive components performance standard Sealed closures for category A. Aerial |
| BS EN 61753-101-3:2009 | Fibre optic interconnecting devices and passive components performance standard Fibre management systems for category U. Uncontrolled environment |
| BS EN 187102:1995 | Harmonized system of quality assessment for electronic components. Family specification: optical aerial telecommunication cables |
| EN 61753-111-8:2010 | Fibre optic interconnecting devices and passive components - Performance standard - Part 111-8: Sealed closures for category G - Ground |
| BS EN 187105:2002 | Single mode optical cable (duct/direct buried installation) |
| I.S. EN 60794-1-23:2012 | OPTICAL FIBRE CABLES - PART 1-23: GENERIC SPECIFICATION - BASIC OPTICAL CABLE TEST PROCEDURES - CABLE ELEMENT TEST METHODS (IEC 60794-1-23:2012 (EQV)) |
| BS EN 50411-2:2008 | Fibre organisers and closures to be used in optical fibre communication systems. Product specifications General and guidance for optical fibre cable joint closures, protected microduct closures, and microduct connectors |
| CEI EN 60794-3-10 : 2015 | OPTICAL FIBRE CABLES - PART 3-10: OUTDOOR CABLES - FAMILY SPECIFICATION FOR DUCT, DIRECTLY BURIED OR LASHED AERIAL OPTICAL TELECOMMUNICATION CABLES |
| CEI EN 60794-3-60 : 2010 | OPTICAL FIBRE CABLES - PART 3-60: OUTDOOR CABLES - FAMILY SPECIFICATION FOR DRINKING WATER PIPE CABLES AND SUBDUCTS FOR INSTALLATION BY BLOWING AND/OR PULLING/DRAGGING/FLOATING IN DRINKING WATER PIPES |
| CEI EN 60794-2-30 : 2010 | OPTICAL FIBRE CABLES - PART 2-30: INDOOR CABLES - FAMILY SPECIFICATION FOR RIBBON CABLES |
| I.S. EN 60794-2-30:2008 | OPTICAL FIBRE CABLES - PART 2-30: INDOOR CABLES - FAMILY SPECIFICATION FOR RIBBON CABLES |
| I.S. EN 60794-3-20:2016 | OPTICAL FIBRE CABLES - PART 3-20: OUTDOOR CABLES - FAMILY SPECIFICATION FOR SELF-SUPPORTING AERIAL TELECOMMUNICATION CABLES |
| I.S. EN 60794-3-21:2016 | OPTICAL FIBRE CABLES - PART 3-21: OUTDOOR CABLES PRODUCT SPECIFICATION FOR OPTICAL SELF-SUPPORTING AERIAL TELECOMMUNICATION CABLES FOR USE IN PREMISES CABLING |
| CEI EN 50174-3 : 2014 | INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS |
| UNE-EN 60794-2-30:2011 | Optical fibre cables - Part 2-30: Indoor cables - Family specification for ribbon cables |
| EN 60794-3-12:2013 | Optical fibre cables - Part 3-12: Outdoor cables - Detailed specification for duct and directly buried optical telecommunication cables for use in premises cabling |
| CEI EN 60794-1-3 : 1ED 2017 | OPTICAL FIBRE CABLES - PART 1-3: GENERIC SPECIFICATION - OPTICAL CABLE ELEMENTS |
| BS EN 50516-1-1:2011 | Industrial connector sets and interconnect components to be used in optical fibre control and communication systems. Product specifications Type SC-RJ PC industrial terminated on EN 60793-2-10 category A1a and A1b multimode fibre to meet the requirements of category I (industrial environments) as specified in IEC 61753-1-3 |
| TS 102 873 : 1.1.1 | ACCESS, TERMINALS, TRANSMISSION AND MULTIPLEXING (ATTM); OPTICAL EXTERNAL NETWORK TESTING INTERFACE |
| CEI EN 50516-1-1 : 2012 | INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 1-1: TYPE SC-RJ PC INDUSTRIAL TERMINATED ON EN 60793-2-10 CATEGORY A1A AND A1B MULTIMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY I (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN IEC 61753-1-3 |
| BS EN 60794-3-70:2016 | Optical fibre cables Outdoor cables. Family specification for outdoor optical fibre cables for rapid/multiple deployment |
| I.S. EN 60794-3-50:2008 | OPTICAL FIBRE CABLES - PART 3-50: OUTDOOR CABLES - FAMILY SPECIFICATION FOR GAS PIPE CABLES AND SUBDUCTS FOR INSTALLATION BY BLOWING AND/OR PULLING/DRAGGING IN GAS PIPES |
| DD CLC/TS 50430:2005 | Optical fibre cables. Gas pipe cables. Family specifications for cables to be installed in high pressure gas pipes |
| BS EN 60794-3-40:2008 | Optical fibre cables Outdoor cables. Family specification for sewer cables and conduits for installation by blowing and/or pulling in non-man accessible storm and sanitary sewers |
| BS EN 50411-3-1:2012 | Fibre organisers and closures to be used in optical fibre communication systems. Product specifications Fibre management system, splice wall box, for category C & G |
| 12/30260552 DC : 0 | BS EN 50174-3:201X - INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS |
| CEI EN 60794-5-20 : 2014 | OPTICAL FIBRE CABLES - PART 5-20: FAMILY SPECIFICATION - OUTDOOR MICRODUCT FIBRE UNITS, MICRODUCTS AND PROTECTED MICRODUCTS FOR INSTALLATION BY BLOWING |
| DD CLC/TS 50431:2005 | Optical fibre cables. Drinking water pipe cables. Family specification for cables to be installed in drinking water pipes |
| BS EN 60794-3-20:2016 | Optical fibre cables Outdoor cables. Family specification for self-supporting aerial telecommunication cables |
| I.S. EN 60794-4:2003 | OPTICAL FIBRE CABLES - PART 4: SECTIONAL SPECIFICATION - AERIAL OPTICAL CABLES ALONG ELECTRICAL POWER LINES |
| 12/30262212 DC : 0 | BS EN 50516-3-1 - INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: TYPE ODVA APC TERMINATED ON EN 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY 1 (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN EN 50173-1 AND IEC 61753-1-3 |
| 17/30347865 DC : 0 | BS EN 50411-3-4 - FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-4: FIBRE MANAGEMENT SYSTEMS, WALL BOX FOR SPLICE TO PATCHCORD CONNECTIONS, FOR CATEGORY C AND A |
| CEI EN 50411-2 : 2010 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2: GENERAL AND GUIDANCE FOR OPTICAL FIBRE CABLE JOINT CLOSURES, PROTECTED MICRODUCT CLOSURES, AND MICRODUCT CONNECTORS |
| BS EN 50516-3-1:2014 | Industrial connector sets and interconnect components to be used in optical fibre control and communication systems. Product specifications Type ODVA APC terminated on EN 60793-2-50 category B1.1 and B1.3 singlemode fibre to meet the requirements of category I (industrial environments) as specified in EN 50173-1 and IEC 61753-1-3 |
| 01/637057 DC : DRAFT AUG 2001 | DRAFT EN 50173 INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS |
| BS EN 60793-2-50:2016 | Optical fibres Product specifications. Sectional specification for class B single-mode fibres |
| UTEC 90 481-1 : 2005 | A SERVICE TO SET UP AREAS BY A TELECOM OPERATOR IN OPERATOR'S PREMISES |
| I.S. EN 60794-5-20:2014 | OPTICAL FIBRE CABLES - PART 5-20: FAMILY SPECIFICATION - OUTDOOR MICRODUCT FIBRE UNITS, MICRODUCTS AND PROTECTED MICRODUCTS FOR INSTALLATION BY BLOWING |
| CEI EN 50516-2-1 : 2012 | INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-1: TYPE ODVA PC INDUSTRIAL TERMINATED ON EN 60793-2-10 CATEGORY A1A AND A1B MULTIMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY 1 (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN EN 50173-1 AND IEC 61753-1-3 |
| CEI EN 60794-3-20 : 2010 | OPTICAL FIBRE CABLES - PART 3-20: OUTDOOR CABLES - FAMILY SPECIFICATION FOR SELF-SUPPORTING AERIAL TELECOMMUNICATION CABLES |
| BS EN 50173-1:2011 | Information technology. Generic cabling systems General requirements |
| I.S. EN 50174-3:2013 | INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS |
| CEI EN 50411-3-1 : 2013 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: FIBRE MANAGEMENT SYSTEM, SPLICE WALL BOX, FOR CATEGORY C & G |
| I.S. EN 60793-2-50:2016 | OPTICAL FIBRES - PART 2-50: PRODUCT SPECIFICATIONS - SECTIONAL SPECIFICATION FOR CLASS B SINGLE-MODE FIBRES |
| PREN 50174-3 : DRAFT 2012 | INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS |
| EN 50173-1:2011 | Information technology - Generic cabling systems - Part 1: General requirements |
| I.S. EN 60794-3-40:2008 | OPTICAL FIBRE CABLES - PART 3-40: OUTDOOR CABLES - FAMILY SPECIFICATION FOR SEWER CABLES AND CONDUITS FOR INSTALLATION BY BLOWING AND/OR PULLING IN NON-MAN ACCESSIBLE STORM AND SANITARY SEWERS |
| I.S. EN 50516-1-1:2011 | INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 1-1: TYPE SC-RJ PC INDUSTRIAL TERMINATED ON EN 60793-2-10 CATEGORY A1A AND A1B MULTIMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY I (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN IEC 61753-1-3 |
| EN 187102 : 95 COR 95 | OPTICAL AERIAL TELECOMMUNICATION CABLES |
| BS EN 187101:1995 | Harmonized system of quality assessment for electronic components. Family specification: optical telecommunication cables to be used in ducts or direct buried application |
| 16/30337049 DC : 0 | BS EN 50290-2-34 - COMMUNICATION CABLES - PART 2-34: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE SHEATHING COMPOUND FOR OUTDOOR OPTICAL FIBRE CABLES |
| BS EN 60794-3-21:2016 | Optical fibre cables Outdoor cables. Product specification for optical self-supporting aerial telecommunication cables for use in premises cabling |
| I.S. EN 187105:2002 | SINGLE MODE OPTICAL CABLE (DUCT/DIRECT BURIED INSTALLATION) |
| CEI EN 60794-3-40 : 2010 | OPTICAL FIBRE CABLES - PART 3-40: OUTDOOR CABLES - FAMILY SPECIFICATION FOR SEWER CABLES AND CONDUITS FOR INSTALLATION BY BLOWING AND/OR PULLING IN NON-MAN ACCESSIBLE STORM AND SANITARY SEWERS |
| UNE-EN 60794-5:2012 | Optical fibre cables - Part 5: Sectional specification - Microduct cabling for installation by blowing |
| BS EN 61753-111-9:2010 | Fibre optic interconnecting devices and passive components performance standard Sealed closures for category S. Subterranean |
| I.S. EN 60794-5-10:2014 | OPTICAL FIBRE CABLES - PART 5-10: FAMILY SPECIFICATION - OUTDOOR MICRODUCT OPTICAL FIBRE CABLES, MICRODUCTS AND PROTECTED MICRODUCTS FOR INSTALLATION BY BLOWING |
| 07/30170352 DC : DRAFT AUG 2007 | BS EN 50411-2 - FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2: GENERAL AND GUIDANCE FOR OPTICAL FIBRE CABLE JOINT CLOSURES, PROTECTED MICRODUCT CLOSURES AND MICRODUCT CONNECTORS |
| BS EN 60794-3-50:2008 | Optical fibre cables Outdoor cables. Family specification for gas pipe cables and subducts for installation by blowing and/or pulling/dragging in gas pipes |
| BS EN 50173:1996 | Information technology. Generic cabling systems |
| CEI EN 60794-3-12 : 2014 | OPTICAL FIBRE CABLES - PART 3-12: OUTDOOR CABLES - DETAILED SPECIFICATION FOR DUCT AND DIRECTLY BURIED OPTICAL TELECOMMUNICATION CABLES FOR USE IN PREMISES CABLING |
| CEI EN 50173-1 : 2011 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| CEI EN 50516-3-1 : 2014 | INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: TYPE ODVA APC TERMINATED ON EN 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY 1 (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN EN 50173-1 AND IEC 61753-1-3 |
| I.S. EN 50516-2-1:2011 | INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-1: TYPE ODVA PC INDUSTRIAL TERMINATED ON EN 60793-2-10 CATEGORY A1A AND A1B MULTIMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY I (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN EN 50173-1 AND IEC 61753-1-3 |
| I.S. EN 50516-3-1:2014 | INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: TYPE ODVA APC TERMINATED ON EN 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY 1 (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN EN 50173-1 AND IEC 61753-1-3 |
| EN 50174-3:2013/A1:2017 | INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS |
| I.S. EN 60794-2-20:2014 | OPTICAL FIBRE CABLES - PART 2-20: INDOOR CABLES - FAMILY SPECIFICATION FOR MULTI-FIBRE OPTICAL CABLES |
| CLC/TS 50431:2005 | Optical fibre cables - Drinking water pipe cables - Family specification for cables to be installed in drinking water pipes |
| CEI EN 60794-5-10 : 2014 | OPTICAL FIBRE CABLES - PART 5-10: FAMILY SPECIFICATION - OUTDOOR MICRODUCT OPTICAL FIBRE CABLES, MICRODUCTS AND PROTECTED MICRODUCTS FOR INSTALLATION BY BLOWING |
| CEI EN 60794-3-50 : 2010 | OPTICAL FIBRE CABLES - PART 3-50: OUTDOOR CABLES - FAMILY SPECIFICATION FOR GAS PIPE CABLES AND SUBDUCTS FOR INSTALLATION BY BLOWING AND/OR PULLING/DRAGGING IN GAS PIPES |
| I.S. EN 50411-2:2008 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2: GENERAL AND GUIDANCE FOR OPTICAL FIBRE CABLE JOINT CLOSURES, PROTECTED MICRODUCT CLOSURES, AND MICRODUCT CONNECTORS |
| EN 50411-3-1:2012 | Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 3-1: Fibre management system, splice wall box, for category C & G |
| BS EN 50516-2-1:2011 | Industrial connector sets and interconnect components to be used in optical fibre control and communication systems. Product specifications Type ODVA PC industrial terminated on EN 60793-2-10 category A1a and A1b multimode fibre to meet the requirements of category I (industrial environments) as specified in EN 50173-1 and IEC 61753-1-3 |
| BS EN 60794-5:2016 | Optical fibre cables Sectional specification. Microduct cabling for installation by blowing |
| BS EN 60794-3-10:2015 | Optical fibre cables Outdoor cables. Family specification for duct, directly buried or lashed aerial optical telecommunication cables |
| BS EN 60794-1-23:2012 | Optical fibre cables Generic specification. Basic optical cable test procedures. Cable element test methods |
| I.S. EN 50173-1:2011 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| BS EN 60794-2-20:2014 | Optical fibre cables Indoor cables. Family specification for multi-fibre optical cables |
| BS EN 60794-3-12:2013 | Optical fibre cables Outdoor cables. Detailed specification for duct and directly buried optical telecommunication cables for use in premises cabling |
| EN 60794-3-70:2016 | Optical fibre cables - Part 3-70: Outdoor cables - Family specification for outdoor optical fibre cables for rapid/multiple deployment |
| BS EN 61753-111-8:2010 | Fibre optic interconnecting devices and passive components performance standard Sealed closures for category G. Ground |
| BS EN 60794-5-20:2014 | Optical fibre cables Family specification. Outdoor microduct fibre units, microducts and protected microducts for installation by blowing |
| I.S. CLC TS 50430:2005 | OPTICAL FIBRE CABLES - GAS PIPE CABLES - FAMILY SPECIFICATION FOR CABLES TO BE INSTALLED IN HIGH PRESSURE GAS PIPES |
| CEI EN 60794-2-20 : 2014 | OPTICAL FIBRE CABLES - PART 2-20: INDOOR CABLES - FAMILY SPECIFICATION FOR MULTI-FIBRE OPTICAL CABLES |
| BS EN 60794-4:2003 | Optical fibre cables Sectional specification. Aerial optical cables along electrical power lines |
| BS EN 60794-2-30:2008 | Optical fibre cables Indoor cables. Family specification for ribbon cables |
| UNE-EN 60794-1-23:2013 | Optical fibre cables - Part 1-23: Generic specification - Basic optical cable test procedures - Cable element test methods |
| I.S. EN 60794-1-3:2017 | OPTICAL FIBRE CABLES - PART 1-3: GENERIC SPECIFICATION - OPTICAL CABLE ELEMENTS |
| I.S. EN 50411-3-1:2012 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: FIBRE MANAGEMENT SYSTEM, SPLICE WALL BOX, FOR CATEGORY C & G |
| CEI EN 60794-5 : 2008 | OPTICAL FIBRE CABLES - PART 5: SECTIONAL SPECIFICATION - MICRODUCT CABLING FOR INSTALLATION BY BLOWING |
| CEI EN 60793-1-48 : 2009 | OPTICAL FIBRES - PART 1-48: MEASUREMENT METHODS AND TEST PROCEDURES - POLARIZATION MODE DISPERSION |
| BS EN 50174-3 : 2013 | INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS |
| PREN 50290-2-34 : DRAFT 2016 | COMMUNICATION CABLES - PART 2-34: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE SHEATHING COMPOUND FOR OUTDOOR OPTICAL FIBRE CABLES |
| I.S. CLC TS 50429:2005 | OPTICAL FIBRE CABLES - SEWER CABLES - FAMILY SPECIFICATION FOR CABLES TO BE INSTALLED IN STORM AND SANITARY SEWERS |
| I.S. EN 60794-3-60:2008 | OPTICAL FIBRE CABLES - PART 3-60: OUTDOOR CABLES - FAMILY SPECIFICATION FOR DRINKING WATER PIPE CABLES AND SUBDUCTS FOR INSTALLATION BY BLOWING AND/OR PULLING/DRAGGING/FLOATING IN DRINKING WATER PIPES |
| EN 50516-1-1:2011/AC:2012 | INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 1-1: TYPE SC-RJ PC INDUSTRIAL TERMINATED ON EN 60793-2-10 CATEGORY A1A AND A1B MULTIMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY I (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN IEC 61753-1-3 |
| EN 60794-3-21:2016 | Optical fibre cables - Part 3-21: Outdoor cables - Product specification for optical self-supporting aerial telecommunication cables for use in premises cabling |
| EN 60794-3-40:2008 | Optical fibre cables - Part 3-40: Outdoor cables - Family specification for sewer cables and conduits for installation by blowing and/or pulling in non-man accessible storm and sanitary sewers |
| EN 50411-2:2008 | Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2: General and guidance for optical fibre cable joint closures, protected microduct closures, and microduct connectors |
| EN 60794-3-10:2015 | Optical fibre cables - Part 3-10: Outdoor cables - Family specification for duct, directly buried or lashed aerial optical telecommunication cables |
| EN 187105:2002 | Single mode optical cable (duct/direct buried installation) |
| EN 50173 : 95 AMD 1 2000 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS |
| EN 60794-5-10:2014 | Optical fibre cables - Part 5–10: Family specification - Outdoor microduct optical fibre cables, microducts and protected microducts for installation by blowing |
| EN 60794-3-20:2016 | Optical fibre cables - Part 3-20: Outdoor cables - Family specification for self-supporting aerial telecommunication cables |
| EN 50516-3-1:2014 | Industrial connector sets and interconnect components to be used in optical fibre control and communication systems - Product specifications - Part 3-1: Type ODVA APC terminated on EN 60793-2-50 category B1.1 and B1.3 singlemode fibre to meet the requirements of category I (industrial environments) as specified in EN 50173-1 and IEC 61753-1-3 |
| EN 60793-2-50:2016 | Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres |
| IEC 60811-501:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 501: Mechanical tests - Tests for determining the mechanical properties of insulating and sheathing compounds |
| EN 60793-1-32:2010 | Optical fibres - Part 1-32: Measurement methods and test procedures - Coating strippability |
| EN 60794-1-23:2012 | OPTICAL FIBRE CABLES - PART 1-23: GENERIC SPECIFICATION - BASIC OPTICAL CABLE TEST PROCEDURES - CABLE ELEMENT TEST METHODS (IEC 60794-1-23:2012) |
| IEC 60811-607:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 607: Physical tests - Test for the assessment of carbon black dispersion in polyethylene and polypropylene |
| EN 60793-1-21:2002 | Optical fibres - Part 1-21: Measurement methods and test procedures - Coating geometry |
| EN 60793-1-44:2011 | OPTICAL FIBRES - PART 1-44: MEASUREMENT METHODS AND TEST PROCEDURES - CUT-OFF WAVELENGTH |
| IEC 60793-1-44:2011 | Optical fibres - Part 1-44: Measurement methods and test procedures - Cut-off wavelength |
| EN 60811-604:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 604: Physical tests - Measurement of absence of corrosive components in filling compounds |
| IEC 60793-2:2015 | Optical fibres - Part 2: Product specifications - General |
| IEC 60304:1982 | Standard colours for insulation for low-frequency cables and wires |
| EN 60794-1-1:2016 | Optical fibre cables - Part 1-1: Generic specification - General |
| IEC TR 62839-1:2014 | Environmental declaration - Part 1: Wires, cables and accessory products - Specific rules |
| IEC 60811-203:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 203: General tests - Measurement of overall dimensions |
| EN 60811-501:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 501: Mechanical tests - Tests for determining the mechanical properties of insulating and sheathing compounds |
| IEC 60811-401:2012+AMD1:2017 CSV | Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven |
| IEC 60811-202:2012+AMD1:2017 CSV | Electric and optical fibre cables - Test methods for non-metallic materials - Part 202: General tests - Measurement of thickness of non-metallic sheath |
| IEC 60794-1-1:2015 | Optical fibre cables - Part 1-1: Generic specification - General |
| EN 60793-1-40:2003 | Optical fibres - Part 1-40: Measurement methods and test procedures - Attenuation |
| IEC 60793-1-32:2010 | Optical fibres - Part 1-32: Measurement methods and test procedures - Coating strippability |
| IEC TR 61282-3:2006 | Fibre optic communication system design guides - Part 3: Calculation of link polarization mode dispersion |
| EN 60811-607:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 607: Physical tests - Test for the assessment of carbon black dispersion in polyethylene and polypropylene |
| EN 60811-406:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 406: Miscellaneous tests - Resistance to stress cracking of polyethylene and polypropylene compounds |
| EN 60708:2005/AC:2016-08 | LOW-FREQUENCY CABLES WITH POLYOLEFIN INSULATION AND MOISTURE BARRIER POLYOLEFIN SHEATH |
| IEC 60793-1-40:2001 | Optical fibres - Part 1-40: Measurement methods and test procedures - Attenuation |
| IEC 60811-604:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 604: Physical tests - Measurement of absence of corrosive components in filling compounds |
| IEC 60793-1-21:2001 | Optical fibres - Part 1-21: Measurement methods and test procedures - Coating geometry |
| IEC 60794-1-22:2017 | Optical fibre cables - Part 1-22: Generic specification - Basic optical cable test procedures - Environmental test methods |
| IEC TR 62690:2014 | Hydrogen effects in optical fibre cables - Guidelines |
| EN 60793-2:2016 | Optical fibres - Part 2: Product specifications - General |
| HD 402 : 200S2 | STANDARD COLOURS FOR INSULATION FOR LOW-FREQUENCY CABLES AND WIRES |
| IEC TR 62691:2016 | Optical fibre cables - Guidelines to the installation of optical fibre cables |
| IEC 60708:2005 | Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath |
| EN 60811-203:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 203: General tests - Measurement of overall dimensions |
| IEC 60811-406:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 406: Miscellaneous tests - Resistance to stress cracking of polyethylene and polypropylene compounds |
| IEC 60794-1-23:2012 | Optical fibre cables - Part 1-23: Generic specification - Basic optical cable test procedures - Cable element test methods |
| IEC 60794-1-21:2015 | Optical fibre cables - Part 1-21: Generic specification - Basic optical cable test procedures - Mechanical tests methods |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.