EN 60584-2:1993
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Thermocouples - Part 2: Tolerances
Superseded date
01-12-2013
Superseded by
Published date
19-04-1993
Sorry this product is not available in your region.
Foreword
1 Scope
2 Definitions
3 Tolerances
Contains the manufacturing tolerances for both noble and base metal thermocouples manufactured in accordance with e.m.f. temperature relationships of Part 1 of the standard. The tolerance values are for a thermocouple manufactured from wires normally in the diameter range 0.25 mm to 3 mm, as delivered to the user and do not allow for calibration draft during use.
| Committee |
CLC/TC 65X
|
| DevelopmentNote |
Supersedes HD 446.2 (05/2001)
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| DIN IEC 60584-2:1992-06 | Identical |
| I.S. EN 60584-2:1993 | Identical |
| NBN EN 60584-2 : 1995 | Identical |
| CEI EN 60584-2 : 1998 | Identical |
| BS EN 60584-2:1993 | Identical |
| PN EN 60584-2 : 1997 | Identical |
| NF EN 60584-2 : 1993 | Identical |
| SN EN 60584-2 : 1993 | Identical |
| DIN EN 60584-2:1994-10 | Identical |
| NEN 10584-2 : 1993 | Identical |
| UNE-EN 60584-2:1996 | Identical |
| I.S. EN 1892:2005 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE UNDER INERT ATMOSPHERE - DETERMINATION OF TENSILE PROPERTIES |
| 05/30131018 DC : DRAFT MAR 2005 | EN 15181 - MEASURING METHOD OF THE ENERGY CONSUMPTION OF GAS FIRED OVENS |
| 02/124462 DC : DRAFT DEC 2002 | BS EN 285 - STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS |
| BS EN 60695-11-3:2012 | Fire hazard testing Test flames. 500 W flames. Apparatus and confirmational test methods |
| 07/30173974 DC : 0 | BS EN 50304/60350 AMD1 - ELECTRIC COOKING RANGES, HOBS, OVENS AND GRILLS FOR HOUSEHOLD USE - METHODS FOR MEASURING PERFORMANCE |
| I.S. EN 15157:2006 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE IN AIR AT ATMOSPHERIC PRESSURE - DETERMINATION OF FATIGUE PROPERTIES AT CONSTANT AMPLITUDE |
| 12/30261215 DC : 0 | BS EN 13060 - SMALL STEAM STERILIZERS |
| UNI EN 820-4 : 2009 | ADVANCED TECHNICAL CERAMICS - THERMOMECHANICAL PROPERTIES OF MONOLITHIC CERAMICS - PART 4: DETERMINATION OF FLEXURAL CREEP DEFORMATION AT ELEVATED TEMPERATURES |
| BS EN 820-4:2009 | Advanced technical ceramics. Thermomechanical properties of monolithic ceramics Determination of flexural creep deformation at elevated temperatures |
| 11/30252448 DC : 0 | BS EN 1422 - STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS |
| PREN 14180 : DRAFT 2012 | STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING |
| 06/30139635 DC : 0 | EN 777-2 - MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 2: SYSTEM E, SAFETY |
| DD ENV 12789:1998 | Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under air at atmospheric pressure. Determination of flexural strength |
| PREN 285 : DRAFT 2013 | STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS |
| EN 60350-2:2018 | Household electric cooking appliances - Part 2: Hobs - Methods for measuring performance |
| UNI EN 820-5 : 2009 | ADVANCED TECHNICAL CERAMICS - THERMOMECHANICAL PROPERTIES OF MONOLITHIC CERAMICS - PART 5: DETERMINATION OF ELASTIC MODULI AT ELEVATED TEMPERATURES |
| PREN 13060 : DRAFT 2012 | SMALL STEAM STERILIZERS |
| PREN 4049-001 : 200P1 | AEROSPACE SERIES - THERMOCOUPLE EXTENSION CABLE - OPERATING TEMPERATURES BETWEEN -65 DEGREE C TO 260 DEGREE C - PART 001: TECHNICAL SPECIFICATION |
| CEN/TR 16988:2016 | Estimation of uncertainty in the single burning item test |
| S.R. CEN/TR 16988:2016 | ESTIMATION OF UNCERTAINTY IN THE SINGLE BURNING ITEM TEST |
| 17/30332894 DC : 0 | BS EN 17082 - DOMESTIC AND NON-DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW |
| I.S. EN 60695-2-10:2013 | FIRE HAZARD TESTING - PART 2-10: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE APPARATUS AND COMMON TEST PROCEDURE (IEC 60695-2-10:2013 (EQV)) |
| S.R. CEN TS 15658:2007 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC FIBRES AT HIGH TEMPERATURE UNDER NON-REACTIVE ENVIRONMENT - DETERMINATION OF CREEP BEHAVIOUR BY THE HOT END METHOD |
| NF EN 2002-002 : 2006 | AEROSPACE SERIES - METALLIC MATERIALS - TEST METHODS - PART 002: TENSILE TESTING AT ELEVATED TEMPERATURE |
| DIN EN 416-1:2009-09 | SINGLE BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATERS FOR NON-DOMESTIC USE - PART 1: SAFETY |
| DIN EN 777-1:2009-09 | MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 1: SYSTEM D - SAFETY |
| DIN EN 777-3:2009-09 | MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON DOMESTIC USE - PART 3: SYSTEM F - SAFETY |
| DIN EN 777-2:2009-09 | MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 2: SYSTEM E - SAFETY |
| DIN EN 13235:2007-01 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE UNDER INERT ATMOSPHERE - DETERMINATION OF CREEP BEHAVIOUR |
| BS EN 993-9:1997 | Methods of test for dense shaped refractory products Determination of creep in compression |
| BS EN 12599:2012 | Ventilation for buildings. Test procedures and measurement methods to hand over air conditioning and ventilation systems |
| BS EN 12789:2002 | Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under air at atmospheric pressure. Determination of flexural strength |
| BS EN 12952-15:2003 | Water-tube boilers and auxiliary installations Acceptance tests |
| BS EN 821-3:2005 | Advanced technical ceramics. Monolithic ceramics. Thermo-physical properties Determination of specific heat capacity |
| BS EN 821-2:1997 | Advanced technical ceramics. Monolithic ceramics. Thermo-physical properties Determination of thermal diffusivity by the laser flash (or heat pulse) method |
| BS EN 416-1:2009 | Single burner gas-fired overhead radiant tube heaters for non-domestic use Safety |
| BS EN 15335:2007 | Advanced technical ceramics. Ceramic composites. Determination of elastic properties by resonant beam method up to 2000°C |
| BS EN 12291:2003 | Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure. Determination of compression properties |
| EN 12291:2003 | Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of compression properties |
| DIN EN 821-3:2005-04 | Advanced technical ceramics - Monolithic ceramics - Thermo-physical properties - Part 3: Determination of specific heat capacity |
| EN 12669:2000 | Direct gas-fired hot air blowers for use in greenhouses and supplementary non-domestic space heating |
| EN 61855:2003 | Household electrical hair care appliances - Methods of measuring the performance |
| EN 60695-2-10:2013 | Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure |
| EN 12290:2005 | Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of compression properties |
| CEN/TS 1007-7:2006 | Advanced technical ceramics - Ceramic composites. Methods of test for reinforcements - Part 7: Determination of the distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at high temperature |
| EN 1007-7:2010 | Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Part 7: Determination of the distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at high temperature |
| EN 1007-6:2007 | Advanced technical ceramic - Ceramic composites - Methods of test for reinforcements - Part 6: Determination of tensile properties of filaments at high temperature |
| EN 60695-11-4 : 2011 | FIRE HAZARD TESTING - PART 11-4: TEST FLAMES - 50 W FLAME - APPARATUS AND CONFIRMATIONAL TEST METHOD (IEC 60695-11-4:2011) |
| EN 12599:2012 | Ventilation for buildings - Test procedures and measurement methods to hand over air conditioning and ventilation systems |
| CEN/TS 15658:2007 | Advanced technical ceramics - Mechanical properties of ceramic fibres at high temperature under non-reactive environment - Determination of creep behaviour by the hot end method |
| EN 1319:2009 | Domestic gas-fired forced convection air heaters for space heating, with fan-assisted burners not exceeding a net heat input of 70 kW |
| EN 820-5:2009 | Advanced technical ceramics - Thermomechanical properties of monolithic ceramics - Part 5: Determination of elastic moduli at elevated temperatures |
| EN 13235:2006 | Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of creep behaviour |
| EN 12789:2002 | Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under air at atmospheric pressure - Determination of flexural strength |
| I.S. EN 50304:2009 | ELECTRIC COOKING RANGES, HOBS, OVENS AND GRILLS FOR HOUSEHOLD USE - METHODS FOR MEASURING PERFORMANCE |
| PREN 1422 : DRAFT 2011 | STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS |
| 10/30235551 DC : 0 | BS EN 60350-2 - HOUSEHOLD ELECTRIC COOKING APPLIANCES - PART 2: HOBS - METHODS FOR MEASURING PERFORMANCE |
| I.S. EN 60705:2015 | HOUSEHOLD MICROWAVE OVENS - METHODS FOR MEASURING PERFORMANCE |
| 12/30262894 DC : 0 | BS EN 14180 - STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING |
| BS EN 60350-1:2016 | Household electric cooking appliances Ranges, ovens, steam ovens and grills — Methods for measuring performance (IEC 60350-1:2016, modified) |
| I.S. EN 1894:2005 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE UNDER INERT ATMOSPHERE - DETERMINATION OF SHEAR STRENGTH BY COMPRESSION LOADING OF NOTCHED SPECIMENS |
| CEI EN 60695-11-3 : 2013 | FIRE HAZARD TESTING - PART 11-3: TEST FLAMES - 500 W FLAMES - APPARATUS AND CONFIRMATIONAL TEST METHODS |
| I.S. EN 1007-6:2007 | ADVANCED TECHNICAL CERAMIC - CERAMIC COMPOSITES - METHODS OF TEST FOR REINFORCEMENTS - PART 6: DETERMINATION OF TENSILE PROPERTIES OF FILAMENTS AT HIGH TEMPERATURE |
| 02/121895 DC : DRAFT APR 2002 | BS EN 13060 - SMALL STEAM STERILIZERS |
| BS EN 60350 : 2009 | ELECTRIC COOKING RANGES, HOBS, OVENS AND GRILLS FOR HOUSEHOLD USE - METHODS FOR MEASURING PERFORMANCE |
| 06/30139629 DC : 0 | EN 777-1 - MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 1: SYSTEM D, SAFETY |
| 13/30278676 DC : 0 | BS EN 285 - STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS |
| 02/122341 DC : DRAFT MAY 2002 | PREN 993-19:2002 - METHODS OF TEST FOR DENSE SHAPED REFRACTORY PRODUCTS - PART 19: DETERMINATION OF THERMAL EXPANSION |
| PREN 12599 : DRAFT 2010 | VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS |
| BS EN 50304 : 2009 | ELECTRIC COOKING RANGES, HOBS, OVENS AND GRILLS FOR HOUSEHOLD USE - METHODS FOR MEASURING PERFORMANCE |
| DD ENV 12923-2:2001 | Advanced technical ceramics. Monolithic ceramics Oxidation test |
| XP CEN/TS 15658 : 2007 XP | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC FIBRES AT HIGH TEMPERATURE UNDER NON-REACTIVE ENVIRONMENT - DETERMINATION OF CREEP BEHAVIOUR - HOT END METHOD |
| UNE-EN 50193-1:2016 | Electric instantaneous water heaters - Methods for measuring the Performance - Part 1: General requirements |
| I.S. EN 1007-7:2010 | ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - METHODS OF TEST FOR REINFORCEMENTS - PART 7: DETERMINATION OF THE DISTRIBUTION OF TENSILE STRENGTH AND OF TENSILE STRAIN TO FAILURE OF FILAMENTS WITHIN A MULTIFILAMENT TOW AT HIGH TEMPERATURE |
| ASTM E 2714 : 2013 : REDLINE | Standard Test Method for Creep-Fatigue Testing |
| NF EN 820-4 : 2009 | ADVANCED TECHNICAL CERAMICS - THERMOMECHANICAL PROPERTIES OF MONOLITHIC CERAMICS - PART 4: DETERMINATION OF FLEXURAL CREEP DEFORMATION AT ELEVATED TEMPERATURES |
| ISO 14848:1998 | Plastics — Unsaturated-polyester resins — Determination of reactivity at 130 degrees C |
| EN 60705:2015 | Household microwave ovens - Methods for measuring performance |
| DIN EN 1007-6:2008-02 | Advanced technical ceramic - Ceramic composites - Methods of test for reinforcements - Part 6: Determination of tensile properties of filaments at high temperature |
| DIN EN 10319-2:2007-01 | Metallic materials - Tensile stress relaxation testing - Part 2: Procedure for bolted joint models |
| DIN EN 12788:2005-11 | Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of flexural strength |
| DIN EN 1020:2010-05 | NON-DOMESTIC FORCED CONVECTION GAS-FIRED AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW INCORPORATING A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR OR COMBUSTION PRODUCTS |
| DIN EN 1319:2010-06 | DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING, WITH FAN-ASSISTED BURNERS NOT EXCEEDING A NET HEAT INPUT OF 70 KW |
| DIN EN 993-19:2004-08 | Methods of test for dense shaped refractory products - Part 19: Determination of thermal expansion by a differential method |
| DIN EN 15758:2010-12 | Conservation of Cultural Property - Procedures and instruments for measuring temperatures of the air and of the surfaces of objects |
| BS EN 1007-6:2007 | Advanced technical ceramic. Ceramic composites. Methods of test for reinforcements Determination of tensile properties of filaments at high temperature |
| BS EN 820-3:2004 | Advanced technical ceramics. Monolithic ceramics. Thermomechanical properties Determination of resistance to thermal shock by water quenching |
| BS EN 993-8:1997 | Methods of test for dense shaped refractory products Determination of refractoriness-under-load |
| BS EN 61855:2003 | Household electrical hair care appliances. Methods of measuring the performance |
| DIN EN 1893:2005-07 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPER TIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE IN AIR AT ATMOSPHERIC PRESSURE - DETERMINATION OF TENSILE PROPERTIES |
| DIN EN 12290:2005-09 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE UNDER INERT ATMOSPHERE - DETERMINATION OF COMPRESSION PROPERTIES |
| I.S. EN 12669:2000 | DIRECT GAS-FIRED HOT AIR BLOWERS FOR USE IN GREENHOUSES AND SUPPLEMENTARY NON-DOMESTIC SPACE HEATING |
| DIN EN 1363-1:2012-10 | FIRE RESISTANCE TESTS - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 12599:2012 | VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS |
| I.S. EN 14180:2014 | STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING |
| DIN EN 14180:2003-10 | STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING |
| DIN EN 1892:2005-07 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE UNDER INERT ATMOSPHERE - DETERMINATION OF TENSILE PROPERTIES |
| DIN EN 12291:2003-10 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE IN AIR AT ATMOSPHERIC PRESSURE - DETERMINATION OF COMPRESSION PROPERTIES |
| DIN EN 1894:2005-07 | Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of shear strength by compression loading of notched specimens; German version EN 1894:2005 |
| VDE 0349-2 : 1998 | METHOD OF TEST FOR THE HYDROLYTIC STABILITY - MOULDED THERMOSETS |
| VDE 0349-1 : 1994 | METHOD OF TEST FOR THE HYDROLYTIC STABILITY OF ELECTRICAL INSULATING MATERIALS - PLASTIC FILMS |
| DIN EN 61234-1 : 1994 | METHOD OF TEST FOR THE HYDROLYTIC STABILITY OF ELECTRICAL INSULATING MATERIALS - PART 1: PLASTIC FILMS |
| DIN EN 61234-2 : 1998 | ELECTRICAL INSULATING MATERIALS - METHOD OF TEST FOR THE HYDROLYTIC STABILITY - PART 2: MOULDED THERMOSETS |
| BS EN 60695-11-4:2011 | Fire hazard testing Test flames. 50 W flame. Apparatus and confirmational test method |
| I.S. EN 12788:2005 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE UNDER INERT ATMOSPHERE - DETERMINATION OF FLEXURAL STRENGTH |
| I.S. EN 12290:2005 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE UNDER INERT ATMOSPHERE DETERMINATION OF COMPRESSION PROPERTIES |
| PD CEN/TR 16988:2016 | Estimation of uncertainty in the single burning item test |
| DIN EN 1007-7:2010-12 | Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Part 7: Determination of the distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at high temperature |
| NF EN 820-5 : 2009 | ADVANCED TECHNICAL CERAMICS - THERMOMECHANICAL PROPERTIES OF MONOLITHIC CERAMICS - PART 5: DETERMINATION OF ELASTIC MODULI AT ELEVATED TEMPERATURES |
| 17/30355897 DC : 0 | BS EN 60350-2:2017/AA - HOUSEHOLD ELECTRIC COOKING APPLIANCES - PART 2: HOBS - METHODS FOR MEASURING PERFORMANCE |
| 15/30316969 DC : 0 | BS EN 15181 - MEASURING METHOD OF THE ENERGY CONSUMPTION OF GAS FIRED OVENS |
| DD ENV 12923-1:1998 | Advanced technical ceramics. Monolithic ceramics General practice for undertaking corrosion tests |
| BS EN 50193-1:2013 | Electric instantaneous water heaters General requirements |
| BS EN 820-5:2009 | Advanced technical ceramics. Thermomechanical properties of monolithic ceramics Determination of elastic moduli at elevated temperatures |
| I.S. EN 60661:2014 | METHODS FOR MEASURING THE PERFORMANCE OF ELECTRIC HOUSEHOLD COFFEE MAKERS |
| 05/30129880 DC : DRAFT FEB 2005 | EN 15157 - ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - MECHANICAL PROPERTIES AT HIGH TEMPERATURE IN AIR AT ATMOSPHERIC PRESSURE - DETERMINATION OF FATIGUE PROPERTIES AT CONSTANT AMPLITUDE |
| 10/30235547 DC : 0 | BS EN 60350-1 - HOUSEHOLD ELECTRIC COOKING APPLIANCES - PART 1: RANGES, OVENS, STEAM OVENS AND GRILLS - METHODS FOR MEASURING PERFORMANCE |
| 12/30249755 DC : DRAFT JULY 2012 | BS EN 50193-1 - ELECTRIC INSTANTANEOUS WATER HEATERS - GENERAL REQUIREMENTS |
| 10/30235574 DC : 0 | BS EN 12599 - VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS |
| 16/30333511 DC : 0 | BS EN 50193-1 - ELECTRIC INSTANTANEOUS WATER HEATERS - METHODS FOR MEASURING THE PERFORMANCE - PART 1: GENERAL REQUIREMENTS |
| PREN 15181 : DRAFT 2015 | MEASURING METHOD OF THE ENERGY CONSUMPTION OF GAS FIRED OVENS |
| 09/30210744 DC : 0 | BS EN 15365 - ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC FIBRES AT HIGH TEMPERATURE IN A NON-REACTIVE ENVIRONMENT - DETERMINATION OF CREEP BEHAVIOUR BY THE COLD END METHOD |
| NF EN 1007-7 : 2010 | ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - METHODS OF TEST FOR REINFORCEMENTS - PART 7: DETERMINATION OF THE DISTRIBUTION OF TENSILE STRENGTH AND OF TENSILE STRAIN TO FAILURE OF FILAMENTS WITHIN A MULTIFILAMENT TOW AT HIGH TEMPERATURE |
| EN 13060:2014 | Small steam sterilizers |
| I.S. EN 10319-2:2006 | METALLIC MATERIALS - TENSILE STRESS RELAXATION TESTING - PART 2: PROCEDURE FOR BOLTED JOINT MODELS |
| I.S. EN 60350:2009 | ELECTRIC COOKING RANGES, HOBS, OVENS AND GRILLS FOR HOUSEHOLD USE - METHODS FOR MEASURING PERFORMANCE |
| NORSOK I 001 : 2010 | FIELD INSTRUMENTATION |
| I.S. EN 13060:2014 | SMALL STEAM STERILIZERS |
| UNE-EN 60705:2015 | Household microwave ovens - Methods for measuring performance |
| I.S. CEN TS 15365:2006 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC FIBRES AT HIGH TEMPERATURE IN A NON-REACTIVE ENVIRONMENT - DETERMINATION OF CREEP BEHAVIOUR BY THE COLD END METHOD |
| I.S. CEN TS 820-5:2004 | ADVANCED TECHNICAL CERAMICS - METHODS OF TESTING MONOLITHIC CERAMICS - THERMOMECHANICAL PROPERTIES - PART 5: DETERMINATION OF ELASTIC MODULI AT ELEVATED TEMPERATURES |
| I.S. EN 61855:2003 | HOUSEHOLD ELECTRICAL HAIR CARE APPLIANCES - METHODS OF MEASURING THE PERFORMANCE |
| DIN EN 13060:2015-03 | SMALL STEAM STERILIZERS |
| BS EN 1892:2005 | Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under inert atmosphere. Determination of tensile properties |
| BS EN 1020:2009 | Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300 kW incorporating a fan to assist transportation of combustion air or combustion products |
| I.S. EN 777-4:2009 | MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 4: SYSTEM H - SAFETY |
| I.S. EN 777-2:2009 | MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 2: SYSTEM E - SAFETY |
| I.S. EN 416-1:2009 | SINGLE BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATERS FOR NON-DOMESTIC USE - PART 1: SAFETY |
| I.S. EN 777-3:2009 | MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON DOMESTIC USE - PART 3: SYSTEM F - SAFETY |
| I.S. EN 1319:2009 | DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING, WITH FAN-ASSISTED BURNERS NOT EXCEEDING A NET HEAT INPUT OF 70 KW |
| EN 60350 : 2009 + A11 2010 | ELECTRIC COOKING RANGES, HOBS, OVENS AND GRILLS FOR HOUSEHOLD USE - METHODS FOR MEASURING PERFORMANCE |
| I.S. EN 621:2009 | NON-DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW, WITHOUT A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR AND/OR COMBUSTION PRODUCTS |
| I.S. EN 1020:2009 | NON-DOMESTIC FORCED CONVECTION GAS-FIRED AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW INCORPORATING A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR OR COMBUSTION PRODUCTS |
| I.S. EN 777-1:2009 | MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 1: SYSTEM D - SAFETY |
| EN 821-2:1997 | Advanced technical ceramics - Monolithic ceramics - Thermo-physical properties - Part 2: Determination of thermal diffusivity by the laser flash (or heat pulse) method |
| UNI EN 12599 : 2012 | VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS |
| UNI EN 416-1 : 2009 | SINGLE BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATERS FOR NON-DOMESTIC USE - PART 1: SAFETY |
| UNI EN 777-4 : 2009 | MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 4: SYSTEM H - SAFETY |
| EN 820-4:2009 | Advanced technical ceramics - Thermomechanical properties of monolithic ceramics - Part 4: Determination of flexural creep deformation at elevated temperatures |
| UNI EN 1020 : 2009 | NON-DOMESTIC FORCED CONVECTION GAS- FIRED AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW INCORPORATING A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR OR COMBUSTION PRODUCTS |
| UNI EN 1319 : 2010 | DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING, WITH FAN- ASSISTED BURNERS NOT EXCEEDING A NET HEAT INPUT OF 70 KW |
| UNI EN 621 : 2010 | NON-DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW, WITHOUT A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR AND/OR COMBUSTION PRODUCTS |
| UNI EN 14180 : 2014 | STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING |
| UNI EN 777-1 : 2009 | MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 1: SYSTEM D - SAFETY |
| UNI EN 777-2 : 2009 | MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 2: SYSTEM E - SAFETY |
| UNI EN 777-3 : 2009 | MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 3: SYSTEM F - SAFETY |
| 04/30125773 DC : DRAFT NOV 2004 | EN 12923-1 - ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - PART 1: GENERAL PRACTICE FOR UNDERTAKING CORROSION TESTS |
| BS EN 1007-7:2010 | Advanced technical ceramics. Ceramic composites. Methods of test for reinforcements Determination of the distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at high temperature |
| BS ISO 14848:1998 | Plastics. Unsaturated-polyester resins. Determination of reactivity at 130°C |
| I.S. CEN TS 1007-7:2006 | ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES. METHODS OF TEST FOR REINFORCEMENTS - PART 7: DETERMINATION OF THE DISTRIBUTION OF TENSILE STRENGTH AND OF TENSILE STRAIN TO FAILURE OF FILAMENTS WITHIN A MULTIFILAMENT TOW AT HIGH TEMPERATURE |
| PREN 50193-1 : DRAFT 2016 | ELECTRIC INSTANTANEOUS WATER HEATERS - METHODS FOR MEASURING THE PERFORMANCE - PART 1: GENERAL REQUIREMENTS |
| 05/30129883 DC : DRAFT FEB 2005 | EN 15158 - ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - MECHANICAL PROPERTIES AT HIGH TEMPERATURE IN AIR UNDER INERT ATMOSPHERE - DETERMINATION OF FATIGUE PROPERTIES AT CONSTANT AMPLITUDE |
| I.S. EN 13235:2006 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE UNDER INERT ATMOSPHERE - DETERMINATION OF CREEP BEHAVIOUR |
| UNE-EN 60661:2015 | Methods for measuring the performance of electric household coffee makers |
| I.S. EN 820-3:2004 | ADVANCED TECHNICAL CERAMICS - METHODS OF TESTING MONOLITHIC CERAMICS - THERMOMECHANICAL PROPERTIES - PART 3: DETERMINATION OF RESISTANCE TO THERMAL SHOCK BY WATER QUENCHING |
| DIN 43735:2011-06 | PROCESS CONTROL TECHNOLOGY - ELECTRICAL TEMPERATURE SENSORS - REPLACEABLE INSERTS FOR RTDS AND THERMOCOUPLES |
| BS EN 61234-2:1998 | Method of test for hydrolytic stability of electrical insulating materials Moulded thermosets |
| DKD-R 5-6 : 2008 | |
| 05/30129877 DC : DRAFT FEB 2005 | EN 15156 - ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - MECHANICAL PROPERTIES AT ROOM TEMPERATURE - DETERMINATION OF FATIGUE PROPERTIES AT CONSTANT AMPLITUDE |
| UNI EN 1007-7 : 2010 | ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - METHODS OF TEST FOR REINFORCEMENTS - PART 7: DETERMINATION OF THE DISTRIBUTION OF TENSILE STRENGTH AND OF TENSILE STRAIN TO FAILURE OF FILAMENTS WITHIN A MULTIFILAMENT TOW AT HIGH TEMPERATURE |
| BS EN 2002-2:2005 | Aerospace series. Metallic materials. Test methods Tensile testing at elevated temperature |
| I.S. EN 60695-11-4:2011 | FIRE HAZARD TESTING - PART 11-4: TEST FLAMES - 50 W FLAME - APPARATUS AND CONFIRMATIONAL TEST METHOD (IEC 60695-11-4:2011) |
| 07/30166734 DC : 0 | BS EN 15181 - MEASURING METHOD OF THE ENERGY CONSUMPTION OF GAS FIRED OVENS |
| EN 60350-1:2016 | Household electric cooking appliances - Part 1: Ranges, ovens, steam ovens and grills - Methods for measuring Performance |
| DIN EN 820-4:2013-01 | ADVANCED TECHNICAL CERAMICS - THERMOMECHANICAL PROPERTIES OF MONOLITHIC CERAMICS - PART 4: DETERMINATION OF FLEXURAL CREEP DEFORMATION AT ELEVATED TEMPERATURES |
| UNI EN 1007-6 : 2008 | ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - METHODS OF TEST FOR REINFORCEMENTS - PART 6: DETERMINATION OF TENSILE PROPERTIES OF FILAMENTS AT HIGH TEMPERATURE |
| DD ENV 13235:2000 | Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under inert atmosphere. Determination of creep behaviour |
| DD ENV 820-4:2002 | Advanced technical ceramics. Methods of testing monolithic ceramics. Thermo-mechanical properties Determination of flexural creep deformation at elevated temperatures |
| I.S. EN 61234-1:1995 | METHOD OF TEST FOR THE HYDROLYTIC STABILITY OF ELECTRICAL INSULATING MATERIALS - PART 1: PLASTIC FILMS |
| UNE-EN 60695-11-4:2012 | Fire hazard testing - Part 11-4: Test flames - 50 W flame - Apparatus and confirmational test method |
| PREN 2002-02 : 200P3 | AEROSPACE SERIES - METALLIC MATERIALS - TEST METHODS - PART 2: TENSILE TESTING AT ELEVATED TEMPERATURE |
| PREN 4049-003 : 200P1 | AEROSPACE SERIES - THERMOCOUPLE EXTENSION CABLE - OPERATING TEMPERATURES BETWEEN -65 DEGREE C TO 260 DEGREE C - PART 003: SINGLE CORE NICKEL CHROMIUM/NICKEL ALUMINIUM - PRODUCT STANDARD |
| I.S. EN 60350-1:2016 | HOUSEHOLD ELECTRIC COOKING APPLIANCES - PART 1: RANGES, OVENS, STEAM OVENS AND GRILLS - METHODS FOR MEASURING PERFORMANCE |
| UNE-EN 60695-2-10:2013 | Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure |
| I.S. EN 60695-11-3:2012 | FIRE HAZARD TESTING - PART 11-3: TEST FLAMES - 500 W FLAMES - APPARATUS AND CONFIRMATIONAL TEST METHODS (IEC 60695-11-3:2012 (EQV)) |
| I.S. EN 2002-002:2006 | AEROSPACE SERIES - METALLIC MATERIALS - TEST METHODS - PART 2: TENSILE TESTING AT ELEVATED TEMPERATURE |
| ECA 10-08 : OCT 2011 | CALIBRATION OF THERMOCOUPLES |
| ISO/TR 15658:2009 | Fire resistance tests Guidelines for the design and conduct of non-furnace-based large-scale tests and simulation |
| DIN EN 12599:2013-01 | VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS |
| DIN EN 14180:2014-09 | STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING |
| UNE-EN 50304:2010 | Electric cooking ranges, hobs, ovens and grills for household use - Methods for measuring performance |
| BS EN 13235:2006 | Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under inert atmosphere. Determination of creep behaviour |
| BS EN 621:2009 | Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, without a fan to assist transportation of combustion air and/or combustion products |
| BS EN 12669:2000 | Direct gas-fired hot air blowers for use in greenhouses and supplementary non-domestic space heating |
| BS EN 4049-003:2006 | Aerospace series. Thermocouple extension cable. Operating temperatures between -65°C and 260°C Single core nickel chromium/nickel aluminium. Product standard |
| BS EN 12788:2005 | Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under inert atmosphere. Determination of flexural strength |
| BS EN 1893:2005 | Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure. Determination of tensile properties |
| BS EN 993-19:2004 | Methods of test for dense shaped refractory products Determination of thermal expansion by a differential method |
| BS EN 777-2:2009 | Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use System E. Safety |
| BS EN 867-4:2001 | Non-biological systems for use in sterilizers Specification for indicators as an alternative to the Bowie and Dick test for the detection of steam penetration |
| UNI EN 1363-1 : 2012 | FIRE RESISTANCE TESTS - PART 1: GENERAL REQUIREMENTS |
| BS EN 777-4:2009 | Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use System H. Safety |
| BS EN 12923-1:2006 | Advanced technical ceramics. Monolithic ceramics General practice for undertaking corrosion tests |
| BS EN 1363-1:2012 | Fire resistance tests General requirements |
| BS EN 777-1:2009 | Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use System D. Safety |
| BS EN 13060 : 2014 | SMALL STEAM STERILIZERS |
| UNE-EN 1020:2010 | Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300 kW incorporating a fan to assist transportation of combustion air or combustion products |
| BS EN 10319-2:2006 | Metallic materials. Tensile stress relaxation testing Procedure for bolted joint models |
| BS EN 14180:2014 | Sterilizers for medical purposes. Low temperature steam and formaldehyde sterilizers. Requirements and testing |
| DIN EN 12952-15:2004-01 | Water tube boilers and auxiliary installations - Part 15: Acceptance tests; German version EN 12952-15:2003 |
| UNE-EN 15758:2011 | Conservation of Cultural Property - Procedures and instruments for measuring temperatures of the air and the surfaces of objects |
| BS EN 15758:2010 | Conservation of cultural property. Procedures and instruments for measuring temperatures of the air and the surfaces of objects |
| BS EN 15158:2006 | Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under inert atmosphere. Determination of fatigue properties at constant amplitude |
| EN 1893:2005 | Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of tensile properties |
| ENV 12788 : 1998 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE UNDER INERT ATMOSPHERE - DETERMINATION OF FLEXURAL STRENGTH |
| ENV 12789 : 1998 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE UNDER AIR AT ATMOSPHERE PRESSURE - DETERMINATION OF FLEXURAL STRENGTH |
| EN 15335:2007 | Advanced technical ceramics - Ceramic composites - Determination of elastic properties by resonant beam method up to 2 000 °C |
| EN 621:2009 | Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, without a fan to assist transportation of combustion air and/or combustion products |
| EN 777-2:2009 | Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 2: System E - Safety |
| EN 867-4 : 2000 | NON-BIOLOGICAL SYSTEMS FOR USE IN STERILIZERS- PART 4: SPECIFICATION FOR INDICATORS AS AN ALTERNATIVE TO THE BOWIE AND DICK TEST FOR THE DETECTION OF STEAM PENETRATION |
| EN 15158:2006 | Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of fatigue properties at constant amplitude |
| EN 993-19:2004 | Methods of test for dense shaped refractory products - Part 19: Determination of thermal expansion by a differential method |
| EN 416-1:2009 | Single burner gas-fired overhead radiant tube heaters for non-domestic use - Part 1: Safety |
| EN 15157:2006 | Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of fatigue properties at constant amplitude |
| EN 1892:2005 | Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of tensile properties |
| EN 4049-003:2006 | Aerospace series - Thermocouple extension cable - Operating tempera-tures between - 65 °C to 260 °C - Part 003: Single core nickel chro-mium/nickel aluminium - Product standard |
| EN 15758:2010 | Conservation of Cultural Property - Procedures and instruments for measuring temperatures of the air and the surfaces of objects |
| EN 777-1:2009 | Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 1: System D - Safety |
| ENV 12923-1 : 1997 | ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - GENERAL PRACTICE FOR UNDERTAKING CORROSION TESTS |
| EN 1894:2005 | Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of shear strength by compression loading of notched specimens |
| EN 2002-002:2005 | Aerospace series - Metallic materials - Test methods - Part 2: Tensile testing at elevated temperature |
| EN 4049-001:2006 | Aerospace series - Thermocouple extension cable - Operating temperatures between - 65 °C to 260 °C - Part 001: Technical specification |
| EN 777-3:2009 | Multi-burner gas-fired overhead radiant tube heater systems for non domestic use - Part 3: System F - Safety |
| EN 821-3:2005 | Advanced technical ceramics - Monolithic ceramics. Thermo-physical properties - Part 3: Determination of specific heat capacity |
| EN 14180:2014 | Sterilizers for medical purposes - Low temperature steam and formaldehyde sterilizers - Requirements and testing |
| EN 777-4:2009 | Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 4: System H - Safety |
| ENV 13235 : 1998 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE UNDER INERT ATMOSPHERE - DETERMINATION OF CREEP BEHAVIOUR |
| EN 820-3:2004 | Advanced technical ceramics - Methods of testing monolithic ceramics - Thermomechanical properties - Part 3: Determination of resistance to thermal shock by water quenching |
| PREN 60661 : DRAFT 2012 | METHODS FOR MEASURING THE PERFORMANCE OF ELECTRIC HOUSEHOLD COFFEE MAKERS (IEC 60661:1999, MODIFIED + A1:2003, MODIFIED + A2:2005, MODIFIED) |
| 12/30259741 DC : 0 | BS EN 60661 - METHODS FOR MEASURING THE PERFORMANCE OF ELECTRIC HOUSEHOLD COFFEE MAKERS |
| I.S. EN 12789:2002 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE UNDER AIR AT ATMOSPHERIC PRESSURE - DETERMINATION OF FLEXURAL STRENGTH |
| I.S. EN 821-3:2005 | ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - THERMO-PHYSICAL PROPERTIES - PART 3: DETERMINATION OF SPECIFIC HEAT CAPACITY |
| I.S. EN 12923-1:2006 | ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - PART 1: GENERAL PRACTICE FOR UNDERTAKING CORROSION TESTS |
| UNE-EN 60695-11-3:2013 | Fire hazard testing - Part 11-3: Test flames - 500 W flames - Apparatus and confirmational test methods |
| I.S. EN 1893:2005 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE IN AIR AT ATMOSPHERIC PRESSURE - DETERMINATION OF TENSILE PROPERTIES |
| 08/30185906 DC : 0 | BS EN 820-4 - ADVANCED TECHNICAL CERAMICS - THERMOMECHANICAL PROPERTIES OF MONOLITHIC CERAMICS - PART 4: DETERMINATION OF FLEXURAL CREEP DEFORMATION AT ELEVATED TEMPERATURES |
| DD CEN/TS 15658:2007 | Advanced technical ceramics. Mechanical properties of ceramic fibres at high temperature under non-reactive environment. Determination of creep behaviour by the hot end method |
| BS EN 60350-2 : 2013 | HOUSEHOLD ELECTRIC COOKING APPLIANCES - HOBS - METHODS FOR MEASURING PERFORMANCE |
| 09/30210248 DC : 0 | BS EN 1007-7 - ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - METHODS OF TEST FOR REINFORCEMENTS - PART 7: DETERMINATION OF THE DISTRIBUTION OF TENSILE STRENGTH AND OF TENSILE STRAIN TO FAILURE OF FILAMENTS WITHIN A MULTIFILAMENT TOW AT HIGH TEMPERATURE |
| DD ENV 12788:1998 | Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under inert atmosphere. Determination of flexural strength |
| DIN EN 820-5:2009-10 | ADVANCED TECHNICAL CERAMICS - THERMOMECHANICAL PROPERTIES OF MONOLITHIC CERAMICS - PART 5: DETERMINATION OF ELASTIC MODULI AT ELEVATED TEMPERATURES |
| BS EN 60661:2014 | Methods for measuring the performance of electric household coffee makers |
| BS EN 60695-2-10:2013 | Fire hazard testing Glowing/hot-wire based test methods. Glow-wire apparatus and common test procedure |
| 08/30171902 DC : 0 | BS EN ISO 1182 - REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - NON-COMBUSTIBILITY TEST |
| EN 50193-1:2016 | Electric instantaneous water heaters - Methods for measuring the Performance - Part 1: General requirements |
| BS EN 60705 : 2015 | HOUSEHOLD MICROWAVE OVENS - METHODS FOR MEASURING PERFORMANCE |
| I.S. EN 820-4:2009 | ADVANCED TECHNICAL CERAMICS - THERMOMECHANICAL PROPERTIES OF MONOLITHIC CERAMICS - PART 4: DETERMINATION OF FLEXURAL CREEP DEFORMATION AT ELEVATED TEMPERATURES |
| 06/30139641 DC : 0 | EN 777-3 - MULTI-BURNER GAS-FORED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON DOMESTIC USE - PART 3: SYSTEM F - SAFETY |
| 08/30185915 DC : 0 | BS EN 820-5 - ADVANCED TECHNICAL CERAMICS - THERMOMECHANICAL PROPERTIES OF MONOLITHIC CERAMICS - PART 5: DETERMINATION OF ELASTIC MODULI AT ELEVATED TEMPERATURES |
| UNE-EN 60350-1:2014 | Household electric cooking appliances - Part 1: Ranges, ovens, steam ovens and grills - Methods for measuring performance |
| UNI EN 15758 : 2010 | CONSERVATION OF CULTURAL PROPERTY - PROCEDURES AND INSTRUMENTS FOR MEASURING TEMPERATURES OF THE AIR AND THE SURFACES OF OBJECTS |
| I.S. ENV 1007-6:2002 | ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - METHODS OF TEST FOR REINFORCEMENTS - PART 6: DETERMINATION OF TENSILE PROPERTIES OF FILAMENT AT HIGH TEMPERATURE |
| I.S. EN 820-5:2009 | ADVANCED TECHNICAL CERAMICS - THERMOMECHANICAL PROPERTIES OF MONOLITHIC CERAMICS - PART 5: DETERMINATION OF ELASTIC MODULI AT ELEVATED TEMPERATURES |
| I.S. EN 50193-1:2016 | ELECTRIC INSTANTANEOUS WATER HEATERS - METHODS FOR MEASURING THE PERFORMANCE - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 60350-2:2018 | HOUSEHOLD ELECTRIC COOKING APPLIANCES - PART 2: HOBS - METHODS FOR MEASURING PERFORMANCE |
| UNE-EN 13060:2015 | Small steam sterilizers |
| EN 1363-1:2012 | Fire resistance tests - Part 1: General Requirements |
| DIN EN 777-4:2009-09 | MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 4: SYSTEM H - SAFETY |
| DIN EN 12923-1:2007-03 | Advanced technical ceramics - Monolithic ceramics - Part 1: General practice for undertaking corrosion tests |
| I.S. EN 1363-1:2012 | FIRE RESISTANCE TESTS - PART 1: GENERAL REQUIREMENTS |
| BS EN 4049-001:2006 | Aerospace series. Thermocouple extension cable. Operating temperatures between -65°C and 260°C Technical specification |
| BS EN 1319:2009 | Domestic gas-fired forced convection air heaters for space heating, with fan-assisted burners not exceeding a net heat input of 70 kW |
| BS EN 777-3:2009 | Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use System F. Safety |
| BS EN 12290:2005 | Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under inert atmosphere. Determination of compression properties |
| BS EN 1894:2005 | Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under inert atmosphere. Determination of shear strength by compression loading of notched specimens |
| DIN EN 15335:2007-08 | Advanced technical ceramics - Ceramic composites - Determination of elastic properties by resonant beam method up to 2000 ?C |
| EN 12788:2005 | Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of flexural strength |
| EN 12952-15:2003 | Water-tube boilers and auxiliary installations - Part 15: Acceptance tests |
| DIN EN 621:2010-04 | NON-DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW, WITHOUT A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR AND/OR COMBUSTION PRODUCTS |
| EN 1020:2009 | Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300 kW incorporating a fan to assist transportation of combustion air or combustion products |
| EN 60695-11-3:2012 | Fire hazard testing - Part 11-3: Test flames - 500 W flames - Apparatus and confirmational test methods |
| EN 50304 : 2009 AMD 1 2010 | ELECTRIC COOKING RANGES, HOBS, OVENS AND GRILLS FOR HOUSEHOLD USE - METHODS FOR MEASURING PERFORMANCE |
| EN 61234-1:1994 | Method of test for the hydrolitic stability of electrical insulating materials - Part 1: Plastic films |
| DIN EN 820-3:2004-11 | Advanced technical ceramics - Methods of testing monolithic ceramics - Thermomechanical properties - Part 3: Determination of resistance to thermal shock by water quenching |
| CEN/TS 15365:2006 | Advanced technical ceramics - Mechanical properties of ceramic fibres at high temperature in a non-reactive environment - Determination of creep behaviour by the cold end method |
| EN 10319-2:2006 | Metallic materials - Tensile stress relaxation testing - Part 2: Procedure for bolted joint models |
| EN 12923-1:2006 | Advanced technical ceramics - Monolithic ceramics - Part 1: General practice for undertaking corrosion tests |
| EN 60661:2014 | Methods for measuring the performance of electric household coffee makers |
| CEN/TS 820-5:2004 | Advanced technical ceramics - Methods of testing monolithic ceramics. Thermomechanical properties - Part 5: Determination of elastic moduli at elevated temperatures |
| ENV 12923-2:2001 | Advanced technical ceramics - Monolithic ceramics - Part 2: Oxidation test |
| CEI EN 61855 : 2005 | HOUSEHOLD ELECTRICAL HAIR CARE APPLIANCES - METHODS OF MEASURING THE PERFORMANCE |
| BS 4937-4:1973 | International thermocouple reference tables Nickel -chromium/nickel - aluminium thermocouples. Type K |
| BS 4937-6:1974 | International thermocouple reference tables Nickel-chromium/copper-nickel thermocouples. Type E |
| BS 4937-1:1973 | International thermocouple reference tables Platinum -10% rhodium/platinum thermocouples. Type S |
| BS 4937-7:1974 | International thermocouple reference tables Platinum-30% rhodium/platinum-6% rhodium thermocouples. Type B |
| BS 4937-2:1973 | International thermocouple reference tables Platinum -13% rhodium/platinum thermocouples. Type R |
| BS 4937-3:1973 | International thermocouple reference tables Iron/copper - nickel thermocouples. Type J |
| IEC 60584-1:2013 | Thermocouples - Part 1: EMF specifications and tolerances |
| BS 4937-8:1986 | International thermocouple reference tables Nickel-chromium-silicon/nickel-silicon thermocouples including composition Type N |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.