EN 60529:1991/AC:2016-12
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
Amendment of
Superseded date
31-01-2022
Superseded by
Published date
02-12-2016
Sorry this product is not available in your region.
FOREWORD
Introduction
1 Scope and object
2 Normative references
3 Definitions
4 Designations
5 Degrees of protection against access to hazardous
parts and against solid foreign objects indicated by
the first characteristic numeral
6 Degrees of protection against ingress of water
indicated by the second characteristic numeral
7 Degrees of protection against access to hazardous
parts indicated by the additional letter
8 Supplementary letters
9 Examples of designations with the IP Code
10 Marking
11 General requirements for tests
12 Tests for protection against access to hazardous
parts indicated by the first characteristic numeral
13 Tests for protection against solid foreign objects
indicated by the first characteristic numeral
14 Tests for protection against water indicated by the
second characteristic numeral
15 Tests for protection against access to hazardous
parts indicated by the additional letter
Annex A (informative) - Examples of IP Coding for the
verification of protection of low-voltage
equipment against access to hazardous parts
Annex B (informative) - Summary of responsibilities of
relevant Technical Committees
Bibliography
Annex ZA (normative) - Normative references to
international publications with their
corresponding European publications
Pertains to the classification of degrees of protection provided by enclosures for electrical equipment with a rated voltage not exceeding 72,5 kV.
| Committee |
SR 70
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NEN EN IEC 60529 : 1992 C2 2016 | Identical |
| OVE/ONORM EN 60529 : 2014 AC 2017 | Identical |
| I.S. EN 60529:1993 | Identical |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Identical |
| DIN EN 60529 Berichtigung 1:2017-02 | Identical |
| DIN EN 60529:2014&Berichtigung 1:2017-02 | Identical |
| I.S. EN 60529:1991&A1:2000&A2:2013/ac&AC:2016-12&AC:2019 | Identical |
| DIN EN 60529 : 2014 Berichtigung 1:2017-02 | Identical |
| VDE 0470-1 Berichtigung 1: 2017-02 | Identical |
| DIN EN 60529 Berichtigung 2:2019-06 | Identical |
| DIN EN 60529 : 2014-09 | Identical |
| SN EN 60529 : 1991 AMD 1 2000 | Identical |
| NBN EN 298 : 2012 | Identical |
| NBN EN 1648-2 : 2012 | Corresponds |
| NBN EN 1648-1 : 2012 | Corresponds |
| NEN 10529 : 1992 C1 1993 | Identical |
| NF EN 60529 : 92 AMD 2 2014 | Identical |
| PN EN 60529 : 2003 AC 2017 | Identical |
| I.S. EN 60529:1991&A1:2000&A2:2013/ac& AC:2016-12 | Identical |
| I.S. EN 60529:1991 | Identical |
| DIN EN 1010-2:2011-05 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 2: Printing and varnishing machines including pre-press machinery (includes Amendment A1:2010) |
| 08/30180887 DC : DRAFT MAY 2008 | BS EN 50131-4 - ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 4: WARNING DEVICES |
| DIN EN 60601-2-30 : 2000 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-30: PARTICULAR REQUIREMENTS FOR THE SAFETY, INCLUDING ESSENTIAL PERFORMANCE, OF AUTOMATIC CYCLING NON-INVASIVE BLOOD PRESSURE MONITORING EQUIPMENT |
| 12/30255086 DC : 0 | BS EN 289 - PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS |
| I.S. EN 60335-1:2012 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS |
| UNE-EN 1501-5:2012 | Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting devices for refuse collection vehicles |
| I.S. EN IEC 62828-1:2018 | REFERENCE CONDITIONS AND PROCEDURES FOR TESTING INDUSTRIAL AND PROCESS MEASUREMENT TRANSMITTERS - PART 1: GENERAL PROCEDURES FOR ALL TYPES OF TRANSMITTERS |
| 17/30363953 DC : 0 | BS EN 416 - GAS-FIRED OVERHEAD RADIANT TUBE HEATERS AND RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY |
| I.S. EN 12098-5:2017 | ENERGY PERFORMANCE OF BUILDINGS - CONTROLS FOR HEATING SYSTEMS - PART 5: START-STOP SCHEDULERS FOR HEATING SYSTEMS - MODULES M3-5, 6, 7, 8 |
| BS EN 50325-2:2001 | Industrial communication subsystem based on ISO 11898 (CAN) for controller-device interfaces DeviceNet |
| UNE-EN 15163:2018 | Machines and installations for the exploitation and processing of natural stone - Safety - Requirements for diamond wire saws |
| NF EN 50348 : 2010 | STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR NON-IGNITABLE LIQUID COATING MATERIAL - SAFETY REQUIREMENTS |
| BS EN 62444:2013 | Cable glands for electrical installations |
| BS EN 50131-2-7-3 : 2012 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-3: INTRUSION DETECTORS - GLASS BREAK DETECTORS (ACTIVE) |
| DD CLC/TS 50131-2-7-3:2009 | Alarm systems. Intrusion and hold-up systems Intrusion detectors. Glass break detectors (active) |
| UNE-EN 50124-1:2017 | Railway applications - Insulation coordination - Part 1: Basic requirements - Clearances and creepage distances for all electrical and electronic equipment |
| UNE-EN 60947-5-3:2014 | Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB) |
| DIN EN 16840:2015-04 (Draft) | INLAND NAVIGATION VESSELS - ELECTRICAL SHORE CONNECTION, THREE-PHASE CURRENT 400 V, 50 HZ, AT LEAST 250 A |
| DIN ISO 5826 : 2000 | RESISTANCE WELDING EQUIPMENT - TRANSFORMERS - GENERAL SPECIFICATIONS APPLICABLE TO ALL TRANSFORMERS |
| CEI EN 61754-24-21 : 2010 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 24-21: TYPE SC-RJ CONNECTORS WITH PROTECTIVE HOUSINGS BASED ON IEC 61076-3-106, VARIANT 06 |
| CEI EN 60077-3 : 2002 | RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 3: ELECTROTECHNICAL COMPONENTS - RULES FOR D/C/ CIRCUIT-BREAKERS |
| CEI EN 60601-1-11 : 2016 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-11: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS USED IN THE HOME HEALTHCARE ENVIRONMENT |
| I.S. EN 60335-2-50:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPARATUS - SAFETY - PART 2-50: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC BAINS-MARIE |
| CEI EN 50216-11 : 2009 | POWER TRANSFORMER AND REACTOR FITTINGS - PART 11: OIL AND WINDING TEMPERATURE INDICATORS |
| I.S. EN 61076-3-118:2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-118: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR A 4 POLE + PE POWER CONNECTOR WITH PUSH-PULL COUPLING |
| I.S. EN 61076-2-106:2011 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-106: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CONNECTORS M 16 X 0,75 WITH SCREW-LOCKING AND DEGREE OF PROTECTION IP40 OR IP65/67 |
| BS EN 16564:2014 | Machines and plants for mining and tooling of natural stone. Safety. Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions |
| 12/30265292 DC : 0 | BS EN 12050-2 - WASTEWATER LIFTING PLANTS FOR BUILDINGS AND SITES - PRINCIPLES OF CONSTRUCTION AND TESTING - PART 2: LIFTING PLANTS FOR FAECAL-FREE WASTEWATER |
| 11/30251717 DC : 0 | BS EN 81-20 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 20: PASSENGER AND GOODS PASSENGER LIFTS |
| BS EN 45510-2-3:2000 | Guide for the procurement of power station equipment Electrical equipment. Stationary batteries and chargers |
| BS EN 50411-3-8:2016 | Fibre organizers and closures to be used in optical fibre communication systems. Product specifications Fibre management system, terminal equipment box type 1 for category C |
| BS EN 50411-2-9:2010 | Fibre organisers and closures to be used in optical fibre communications systems. Product specifications Non-sealed closures for air blown fibre microduct cable, for category S & A |
| UNE-EN ISO 18081:2017 | Non-destructive testing - Acoustic emission testing (AT) - Leak detection by means of acoustic emission (ISO 18081:2016) |
| BS EN 60076-11:2004 | Power transformers Dry-type transformers |
| DD CLC/TS 50535:2010 | Railway applications. Onboard auxiliary power converter systems |
| PREN 1808 : DRAFT 2011 | SUSPENDED ACCESS EQUIPMENT - DESIGN CALCULATIONS, STABILITY CRITERIA AND CONSTRUCTION - EXAMINATIONS AND TESTS |
| BS EN 50543:2011 | Electronic portable and transportable apparatus designed to detect and measure carbon dioxide and/or carbon monoxide in indoor ambient air. Requirements and test methods |
| BS EN 50207:2001 | Railway applications. Electronic power converters for rolling stock |
| DIN V ENV 61400-1 : 1996 | WIND TURBINE GENERATOR SYSTEMS - PART 1: SAFETY REQUIREMENTS |
| 15/30291985 DC : 0 | BS ISO 19202-1 - SUMMER TOBOGGAN RUNS - PART 1: SAFETY REQUIREMENTS AND TEST METHODS |
| BS EN 61241-1:2004 | Electrical apparatus for use in the presence of combustible dust Protection by enclosures \'tD\' |
| 14/30297515 DC : 0 | BS EN 16704-2-1 - RAILWAY APPLICATIONS - TRACK - SAFETY PROTECTION ON THE TRACK DURING WORK - PART 2-1: COMMON SOLUTIONS AND TECHNOLOGY - TECHNICAL REQUIREMENTS FOR TRACK WARNING SYSTEMS (TWS) |
| BS EN 61514-2:2013 | Industrial process control systems Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs mounted on an actuator valve assembly |
| BS EN 50411-2-5:2009 | Fibre organisers and closures to be used in optical fibre communication systems. Product specifications Sealed closures for air blown fibre microduct, type 1, for category S & A |
| 03/111582 DC : DRAFT JULY 2003 | BS EN ISO 18779 - DEVICES FOR CONSERVING OXYGEN AND OXYGEN MIXTURES - PARTICULAR REQUIREMENTS |
| BS EN 60255-1:2010 | Measuring relays and protection equipment Common requirements |
| DIN EN 15714-3:2010-02 | Industrial valves - Actuators - Part 3: Pneumatic part-turn actuators for industrial valves - Basic requirements |
| 04/30116573 DC : 0 | EN 15000 - SPECIFICATION FOR LONGITUDINAL LOAD MOMENT LIMITERS FOR VARIABLE REACH TRUCKS |
| 96/542029 DC : DRAFT AUG 96 | EN 1846-2 FIREFIGHTING AND RESCUE SERVICE VEHICLES - PART 2: COMMON REQUIREMENTS - SAFETY AND PERFORMANCE |
| DIN EN 15162:2008-10 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY REQUIREMENTS FOR GANG SAWS |
| I.S. EN 62327:2011 | RADIATION PROTECTION INSTRUMENTATION - HAND-HELD INSTRUMENTS FOR THE DETECTION AND IDENTIFICATION OF RADIONUCLIDES AND FOR THE INDICATION OF AMBIENT DOSE EQUIVALENT RATE FROM PHOTON RADIATION |
| BS EN 60745-1 : 2009 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS |
| 12/30257298 DC : 0 | BS EN 676 - FORCED DRAUGHT BURNERS FOR GASEOUS FUELS |
| 07/30170132 DC : 0 | BS EN 1859 - CHIMNEYS - METAL CHIMNEYS - TEST METHODS |
| I.S. EN 12098-2:2001 | CONTROLS FOR HEATING SYSTEMS - PART 2: OPTIMUM START-STOP CONTROL EQUIPMENT FOR HOT WATER HEATING SYSTEMS |
| PREN 50050-1 : DRAFT 2011 | ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 1: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE LIQUID COATING MATERIALS |
| 09/30206358 DC : DRAFT SEP 2009 | BS EN 1870-4 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTI-BLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING |
| 01/122563 DC : DRAFT JULY 2001 | BS EN 14175-2 - FUME CUPBOARDS - PART 2: SAFETY AND PERFORMANCE REQUIREMENTS |
| BS EN 61869-1:2009 | Instrument transformers General requirements |
| BS EN 15420:2010 | Gas-fired central heating boilers. Type C boilers of nominal heat input exceeding 70 kW, but not exceeding 1000 kW |
| CEI EN 62026-7 : 2013 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 7: COMPONET |
| CEI EN 61310-2 : 2008 | SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 2: REQUIREMENTS FOR MARKING |
| BS EN 50348:2010 | Stationary electrostatic application equipment for non-ignitable liquid coating material. Safety requirements |
| BS EN 16678:2015 | Safety and control devices for gas burners and gas burning appliances. Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa |
| DIN EN 3660-063:2016-01 | Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 063: Cable outlet, style K, straight, for heat shrinkable boot, shielded, sealed, self-locking for EN 3645 - Product standard; German and English version EN 3660-063:2015 |
| CLC/TS 50131-2-6:2004 | Alarm systems - Intrusion systems - Part 2-6: Requirements for opening contacts (magnetic) |
| BS EN 50133-2-1:2000 | Alarm systems. Access control systems for use in security applications. General requirements for components |
| BS EN 60335-2-91:2003 | Specification for safety of household and similar electrical appliances Particular requirements for walk-behind and hand-held lawn trimmers and lawn edge trimmers |
| DIN EN 14829:2007-11 | Independent gas-fired flueless space heaters for nominal heat input not exceeding 6 kW; German version EN 14829:2007 |
| BS EN 50216-2:2002 | Power transformers and reactor fittings Gas and oil actuated relay for liquid immersed transformers and reactors with conservator |
| I.S. EN 50463-2:2017 | RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 2: ENERGY MEASURING |
| BS EN 61851-22:2002 | Electric vehicle conductive charging system A.C. electric vehicle charging station |
| BS EN 50131-2-4:2008 | Alarm systems. Intrusion and hold-up systems Requirements for combined passive infrared and microwave detectors |
| BS EN 50379-2:2012 | Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances Performance requirements for apparatus used in statutory inspections and assessment |
| BS EN 50274:2002 | Low-voltage switchgear and controlgear assemblies. Protection against electric shock. Protection against unintentional direct contact with hazardous live parts |
| 14/30266573 DC : 0 | BS EN 12368 - TRAFFIC CONTROL EQUIPMENT - SIGNAL HEADS |
| I.S. EN 12098-4:2005 | CONTROLS FOR HEATING SYSTEMS - PART 4: OPTIMUM START-STOP CONTROL EQUIPMENT FOR ELECTRICAL SYSTEMS |
| 04/30106849 DC : DRAFT MAY 2004 | EN 1870-1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS |
| 12/30244749 DC : 0 | BS EN 15955-2 - RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| BS EN 50328:2003 | Railway applications. Fixed installations. Electronic power convertors for substations |
| BS EN 50286:2001 | Electrical insulating protective clothing for low-voltage installations |
| BS EN 45510-6-5:2000 | Guide for the procurement of power station equipment. Turbine auxiliaries Dry cooling systems - Section 5: Dry cooling systems |
| I.S. EN 12415:2000 | SAFETY OF MACHINE TOOLS - SMALL NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES |
| DIN EN 15166:2010-02 | Food processing machinery - Automatic back splitting machines of butchery carcasses - Safety and hygiene requirements |
| I.S. EN 50491-2:2010 | GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 2: ENVIRONMENTAL CONDITIONS |
| 12/30258455 DC : 0 | FPREN 60065:2011+FPRAA - AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS |
| 13/30276220 DC : 0 | BS EN 15571 - MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES |
| DD ENV 50231:1997 | Aeronautical ground lighting electrical installation. Constant current regulator. Equipment specifications and tests |
| BS EN 61310-2:2008 | Safety of machinery. Indication, marking and actuation Requirements for marking |
| 16/30349685 DC : 0 | BS EN 50131-2-2 - ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-2: INTRUSION DETECTORS - PASSIVE INFRARED DETECTORS |
| BS EN 15166:2008 | Food processing machinery. Automatic back splitting machines of butchery carcasses. Safety and hygiene requirements |
| I.S. EN 691-1:2012 | SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS |
| I.S. EN IEC 62561-6:2018 COR 2018 | LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 6: REQUIREMENTS FOR LIGHTNING STRIKE COUNTERS (LSC) |
| 12/30261215 DC : 0 | BS EN 13060 - SMALL STEAM STERILIZERS |
| I.S. HD 384-7-708:2005 | ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 7: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - SECTION 708: ELECTRICAL INSTALLATIONS IN CARAVAN PARKS |
| I.S. EN 15714-3:2009 | INDUSTRIAL VALVES - ACTUATORS - PART 3: PNEUMATIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| BS EN 50131-2-6:2008 | Alarm systems. Intrusion and hold-up systems Opening contacts (magnetic) |
| BS EN 15500:2008 | Control for heating, ventilating and air-conditioning applications. Electronic individual zone control equipment |
| DIN EN 50086-1 : 1994 | CONDUIT SYSTEMS FOR ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS |
| BS EN 415-8:2008 | Safety of packaging machines Strapping machines |
| BS EN 14886:2008 | Plastics and rubber machines. Bandknife cutting machines for block foams. Safety requirements |
| PREN 13278 : DRAFT 2013 | OPEN FRONTED GAS-FIRED INDEPENDENT SPACE HEATERS |
| 02/711111 DC : DRAFT SEP 2002 | PREN 415-7 - PACKAGING MACHINES SAFETY - PART 7: GROUP AND SECONDARY PACKAGING MACHINES |
| BS EN 50085-1 : 2005 | CABLE TRUNKING SYSTEMS AND CABLE DUCTING SYSTEMS FOR ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS |
| 16/30337092 DC | BS EN 13378. Pasta processing plant. Pasta presses. Safety and hygiene requirements |
| 04/102158 DC : 0 | BS EN 81-43 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 43: SPECIAL PURPOSE LIFTS FOR CRANES |
| UNI EN 1474-1 : 2009 | INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS |
| 15/30331522 DC : 0 | BS EN 12098-1 - CONTROLS FOR HEATING SYSTEMS - PART 1: CONTROL EQUIPMENT FOR HOT WATER HEATING SYSTEMS - MODULES M3-5, 6, 7, 8 |
| 10/30233949 DC : 0 | BS EN 12111 - TUNNELLING MACHINES - ROAD HEADERS, CONTINUOUS MINERS AND IMPACT RIPPERS - SAFETY REQUIREMENTS |
| 03/119040 DC : DRAFT NOV 2003 | PREN 1010-1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS |
| BS EN 15684:2012 | Building hardware. Mechatronic cylinders. Requirements and test methods |
| 11/30251974 DC : 0 | BS EN 15180 - FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 61514:2002 | Industrial-process control systems. Methods of evaluating the performance of valve positioners with pneumatic outputs |
| BS EN 16340:2014 | Safety and control devices for burners and appliances burning gaseous or liquid fuels. Combustion product sensing devices |
| 05/30131998 DC : 0 | BS EN 15180 - FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 62549:2011 | Articulated systems and flexible systems for cable guiding |
| 11/30213783 DC : 0 | BS EN 50463-1 - RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 1: GENERAL |
| BS EN 60728-5:2008 | Cable networks for television signals, sound signals and interactive services Headend equipment |
| 09/30202532 DC : 0 | BS EN 15954-2 - RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| PREN 12352 : DRAFT 2014 | TRAFFIC CONTROL EQUIPMENT - WARNING AND SAFETY LIGHT DEVICES |
| 07/30170080 DC : DRAFT AUG 2007 | PREN 50131-2-6 - ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-6: OPENING CONTACTS (MAGNETIC) |
| I.S. EN 50107-1:2002:INC:AMD1:2004 | SIGNS AND LUMINOUS-DISCHARGE-TUBE INSTALLATIONS OPERATING FROM A NO-LOAD RATED OUTPUT VOLTAGE EXCEEDING 1 KV BUT NOT EXCEEDING 10 KV - PART 1: GENERAL REQUIREMENTS |
| 12/30254959 DC : 0 | BS EN 89 - GAS-FIRED STORAGE WATER HEATERS FOR THE PRODUCTION OF DOMESTIC HOT WATER |
| CEI EN 60728-5 : 2016 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 5: HEADEND EQUIPMENT |
| UNI EN 15714-4 : 2009 | INDUSTRIAL VALVES - ACTUATORS - PART 4: HYDRAULIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| 17/30354108 DC : 0 | BS EN 17106-1 - ROAD OPERATION MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| 09/30207853 DC : 0 | BS EN 12405-2 - GAS METERS - CONVERSION DEVICES - PART 2: ENERGY CONVERSION |
| 09/30208429 DC : 0 | BS EN 50467 - RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS |
| 16/30335111 DC : 0 | BS EN 12178 - REFRIGERATING SYSTEMS AND HEAT PUMPS - LIQUID LEVEL INDICATING DEVICES - REQUIREMENTS, TESTING AND MARKING |
| EN 60670-1:2005/A1:2013 | BOXES AND ENCLOSURES FOR ELECTRICAL ACCESSORIES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS (IEC 60670-1:2002/A1:2011, MODIFIED) |
| 04/30122625 DC : DRAFT SEP 2004 | CEN/BT/TF 158 N06 - DISPENSE SYSTEMS FOR DRAUGHT BEVERAGES - PART 3: SAFETY REQUIREMENTS FOR SYSTEM COMPONENTS |
| UNE-EN 50050-2:2014 | Electrostatic hand-held spraying equipment - Safety requirements - Part 2: Hand-held spraying equipment for ignitable coating powder |
| BS EN 13216-1:2004 | Chimneys. Test methods for system chimneys General test methods |
| I.S. EN 61987-1:2007 | INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 1: MEASURING EQUIPMENT WITH ANALOGUE AND DIGITAL OUTPUT |
| 00/707535 DC : DRAFT APR 2000 | PREN 13885:2000 - FOOD PROCESSING MACHINERY - CLIPPING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| 05/30129947 DC : 0 | EN 15163 - MACHINES AND INSTALLATIONS FOR THE EXPLOITATION AND PROCESSING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR DIAMOND WIRE SAWS |
| 11/30248849 DC : 0 | BS EN 50050-3:2011 - ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 3: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE FLOCK |
| 12/30253910 DC : DRAFT JULY 2012 | BS EN 1807-2 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - LOG SAWING MACHINES |
| BS EN 81-40:2008 | Safety rules for the construction and installation of lifts. Special lifts for the transport of persons and goods Stairlifts and inclined lifting platforms intended for persons with impaired mobility |
| CEI EN 61754-24-11 : 2010 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 24-11: TYPE SC-RJ CONNECTORS WITH PROTECTIVE HOUSINGS BASED ON IEC 61076-3-117 |
| BS EN 50131-2-2:2017 | Alarm systems. Intrusion and hold-up systems Intrusion detectors. Passive infrared detectors |
| 10/30232422 DC : DRAFT DEC 2010 | BS EN 1870-9 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 9: DOUBLE BLADE CIRCULAR SAWING MACHINES FOR CROSS-CUTTING WITH INTEGRATED FEED AND WITH MANUAL LOADING AND/OR UNLOADING |
| UNE-EN 16743:2016 | Food processing machinery - Automatic industrial slicing machines - Safety and hygiene requirements |
| PREN 50463-3 : DRAFT 2015 | RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 3: DATA HANDLING |
| 11/30238482 DC : 0 | BS EN 1458-1 - DOMESTIC DIRECT GAS-FIRED TUMBLE DRYERS OF TYPES B22D AND B23D, OF NOMINAL HEAT INPUT NOT EXCEEDING 6 KW - PART 1: SAFETY |
| BS EN 50123-7-3:2003 | Railway applications. Fixed installations. d.c. switchgear. Measurement, control and protection devices for specific use in d.c. traction systems Isolating voltage transducers and other voltage measuring devices |
| BS EN 45510-6-6:2000 | Guide for the procurement of power station equipment. Turbine auxiliaries Turbine auxiliaries. Wet and wet/dry cooling towers - Section 6: Wet/dry cooling towers |
| 09/30201995 DC : 0 | BS EN 15949 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR BAR MILLS, STRUCTURAL STEEL MILLS AND WIRE ROD MILLS |
| BS EN 60065 : 2014 | AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS (IEC 60065:2014, MODIFIED) |
| DIN EN 60926 : 2000 | AUXILIARIES FOR LAMPS - STARTING DEVICES (OTHER THAN GLOW STARTERS) - GENERAL AND SAFETY REQUIREMENTS |
| PREN 1870-3 : DRAFT 2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 3: DOWN CUTTING CROSS-CUT SAWS AND DUAL PURPOSE DOWN CUTTING CROSS-CUT SAWS/CIRCULAR SAW BENCHES |
| BS EN 61076-3-115:2010 | Connectors for electronic equipment. Product requirements Rectangular connectors. Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface. Variant 12 related to IEC 61076-3-106. Push-pull type |
| PREN 50463-2 : DRAFT 2015 | RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 2: ENERGY MEASURING |
| 12/30273148 DC : 0 | BS EN 15467 - FOOD PROCESSING MACHINERY - FISH HEADING AND FILLETING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 50216-1:2002 | Power transformers and reactor fittings General |
| BS EN 50050-1:2013 | Electrostatic hand-held spraying equipment. Safety requirements Hand-held spraying equipment for ignitable liquid coating materials |
| BS EN 50463-3:2017 | Railway applications. Energy measurement on board train Data handling |
| 11/30243584 DC : 0 | BS EN 14960 - INFLATABLE PLAY EQUIPMENT - SAFETY REQUIREMENTS AND TEST METHODS |
| 17/30339497 DC : DRAFT JUNE 2017 | BS EN 14972 - FIXED FIREFIGHTING SYSTEMS - WATER MIST SYSTEMS - PART 1: DESIGN, INSTALLATION, INSPECTION AND MAINTENANCE |
| 11/30233201 DC : 0 | BS EN 61009-1 - RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITH INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCBOS) - PART 1: GENERAL RULES |
| I.S. EN 50125-3:2003 | RAILWAY APPLICATION - ENVIRONMENTAL CONDITIONS FOR EQUIPMENT - PART 3: EQUIPMENT FOR SIGNALLING AND TELECOMMUNICATIONS |
| UNI EN 13237 : 2012 | POTENTIALLY EXPLOSIVE ATMOSPHERES - TERMS AND DEFINITIONS FOR EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
| BS EN 62484:2015 | Radiation protection instrumentation. Spectroscopy-based portal monitors used for the detection and identification of illicit trafficking of radioactive material |
| 10/30185766 DC : 0 | BS EN 1889-1 - MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES |
| DIN EN 14958:2010-10 | Food processing machinery - Machinery for grinding and processing flour and semolina - Safety and hygiene requirements (includes Amendment A1:2009) |
| BS EN 15220:2016 | Railway applications. Brake indicators |
| I.S. EN 1010-2:2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 2: PRINTING AND VARNISHING MACHINES INCLUDING PRE-PRESS MACHINERY |
| 12/30258099 DC | BS EN 267. Forced draught burners for liquid fuels |
| BS EN 61757-1:2012 | Fibre optic sensors Generic specification |
| DIN EN 16564:2015-04 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions |
| I.S. EN 50274:2002 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PROTECTION AGAINST ELECTRIC SHOCK - PROTECTION AGAINST UNINTENTIONAL DIRECT CONTACT WITH HAZARDOUS LIVE PARTS |
| BS EN 61995-1:2008 | Devices for the connection of luminaires for household and similar purposes General requirements |
| BS EN 60297-3-109:2016 | Mechanical structures for electrical and electronic equipment. Dimensions of mechanical structures of the 482,6 mm (19 in) series Dimensions of chassis for embedded computing devices |
| BS EN 45545-1:2013 | Railway applications. Fire protection on railway vehicles General |
| UNE-EN 60079-26:2015 | Explosive atmospheres - Part 26: Equipment with Equipment Protection Level (EPL) Ga |
| DD CLC/TS 50131-2-3:2004 | Alarm systems. Intrusion systems Requirements for microwave detectors |
| DIN EN 415-10:2014-07 | SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS |
| BS EN 61822:2009 | Electrical installations for lighting and beaconing of aerodromes. Constant current regulators |
| I.S. EN 13128:2001 | SAFETY OF MACHINE TOOLS - MILLING MACHINES (INCLUDING BORING MACHINES) |
| NF EN 50411-2-9 : 2010 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATIONS SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-9: NON-SEALED CLOSURES FOR AIR BLOWN FIBRE MICRODUCT CABLE, FOR CATEGORY S & A |
| I.S. EN 60079-0:2012 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011 (MOD)) |
| BS EN 61050:1992 | Specification for transformers for tubular discharge lamps having a no-load output voltage exceeding 1000 V (generally called neon-transformers). General and safety requirements |
| DIN CEN/TR 16251;DIN SPEC 5509:2016-08 | RAILWAY APPLICATIONS - ENVIRONMENTAL CONDITIONS - DESIGN GUIDANCE FOR ROLLING STOCK |
| 12/30262897 DC : DRAFT JUNE 2012 | BS EN 1674 - FOOD PROCESSING MACHINERY - DOUGH SHELTERS - SAFETY AND HYGIENE REQUIREMENTS |
| CEI EN 62093 : 2005 | BALANCE-OF-SYSTEM COMPONENTS FOR PHOTOVOLTAIC SYSTEMS - DESIGN QUALIFICATION NATURAL ENVIRONMENTS |
| CEI EN 62618 : 1ED 2017 | RADIATION PROTECTION INSTRUMENTATION - SPECTROSCOPY-BASED ALARMING PERSONAL RADIATION DETECTORS (SPRD) FOR THE DETECTION OF ILLICIT TRAFFICKING OF RADIOACTIVE MATERIAL |
| BS EN 61754-24-21:2009 | Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces Type SC-RJ connectors with protective housings based on IEC 61076-3-106, variant 06 |
| PREN 12368 : DRAFT 2014 | TRAFFIC CONTROL EQUIPMENT - SIGNAL HEADS |
| BS EN 61036:1997 | Alternating current static watt-hour meters for active energy (classes 1 and 2) |
| CEI EN 60947-5-3 : 2014 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-3: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - REQUIREMENTS FOR PROXIMITY DEVICES WITH DEFINED BEHAVIOUR UNDER FAULT CONDITIONS (PDDB) |
| BS EN 61058-1 : 2002 | SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS |
| 11/30237569 DC : 0 | BS EN 1870-19 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS |
| I.S. EN 60335-2-16:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-16: PARTICULAR REQUIREMENTS FOR FOOD WASTE DISPOSERS (IEC 60335-2-16:2002 (MOD)) |
| I.S. EN 15859:2010 | AIR QUALITY - CERTIFICATION OF AUTOMATED DUST ARRESTMENT PLANT MONITORS FOR USE ON STATIONARY SOURCES - PERFORMANCE CRITERIA AND TEST PROCEDURES |
| 95/700126 DC : DRAFT JAN 1995 | PREN 1672-1 - FOOD PROCESSING MACHINERY - SAFETY AND HYGIENE REQUIREMENTS - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS |
| 15/30331510 DC : 0 | BS EN 12098-3 - CONTROLS FOR HEATING SYSTEMS - PART 3: CONTROL EQUIPMENT FOR ELECTRICAL HEATING SYSTEMS - MODULES M3-5, 6, 7, 8 |
| CEI EN 50328 : 2003 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRONIC POWER CONVERTERS FOR SUBSTATIONS |
| CLC/TS 50131-2-3:2004 | Alarm systems - Intrusion systems - Part 2-3: Requirements for microwave detectors |
| BS EN 50380:2017 | Marking and documentation requirements for Photovoltaic Modules |
| PREN 50411-3-8 : DRAFT 2014 | FIBRE ORGANIZERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-8: FIBRE MANAGEMENT SYSTEM, TERMINAL EQUIPMENT BOX TYPE 1 FOR CATEGORY C |
| BS EN 16252:2012 | Machines for compacting waste materials or recyclable fractions. Horizontal baling presses. Safety requirements |
| CEI EN 61987-10 : 2010 | INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 10: LISTS OF PROPERTIES (LOPS) FOR INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL FOR ELECTRONIC DATA EXCHANGE - FUNDAMENTALS |
| 95/216358 DC : 0 | PREN 50228-1 - PERFORMANCE REQUIREMENTS AND TEST METHODS FOR CONTROL AND MONITORING PH ANALYSERS FOR USE IN THE WATER INDUSTRY - PART 1: SPECIFICATION AND TEST METHODS FOR ASSESSING PERFORMANCE UNDER LABORATORY CONDITIONS |
| BS EN 60922:1997 | Auxiliaries for lamps. Ballasts for discharge lamps (excluding tubular fluorescent lamps). General and safety requirements |
| BS EN 60601-1-12:2015 | Medical electrical equipment General requirements for basic safety and essential performance. Collateral Standard: Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency medical services environment |
| BS EN 50463-2:2017 | Railway applications. Energy measurement on board trains Energy measuring |
| 00/706811 DC : DRAFT MAR 2000 | BS EN 13870 - FOOD PROCESSING MACHINERY - CHOP CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN 50078 : 1994 | SAFETY REQUIREMENTS FOR ARC WELDING EQUIPMENT - TORCHES AND GUNS FOR ARC WELDING |
| 05/30130669 DC : DRAFT MAR 2005 | BS EN 15165 - FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 12405-2:2012 | Gas meters. Conversion devices Energy conversion |
| 06/30139635 DC : 0 | EN 777-2 - MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 2: SYSTEM E, SAFETY |
| 11/30239006 DC : 0 | BS EN 13237 - POTENTIALLY EXPLOSIVE ATMOSPHERES - TERMS AND DEFINITIONS FOR EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
| 15/30329546 DC : 0 | BS EN 50463-2 - RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 2: ENERGY MEASURING |
| 16/30338096 DC : 0 | BS EN 303-1 - HEATING BOILERS - PART 1: HEATING BOILERS WITH FORCED DRAUGHT BURNERS - TERMINOLOGY, GENERAL REQUIREMENTS, TESTING AND MARKING |
| BS EN 60601-2-30:2000 | Medical electrical equipment. Particular requirements for safety Particular requirements for safety, including essential performance, of automatic cycling non-invasive blood pressure monitoring equipment |
| 06/30139629 DC : 0 | EN 777-1 - MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 1: SYSTEM D, SAFETY |
| 02/709474 DC : DRAFT JULY 2002 | BS EN 1760-3 - SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES |
| BS EN 61987-10:2009 | Industrial-process measurement and control. Data structures and elements in process equipment catalogues Lists of properties (LOPs) for industrial-process measurement and control for electronic data exchange. Fundamentals |
| I.S. EN 50131-2-7-2:2012 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-2: INTRUSION DETECTORS - GLASS BREAK DETECTORS (PASSIVE) |
| BS EN 62282-3-100:2012 | Fuel cell technologies Stationary fuel cell power systems. Safety |
| 04/30109635 DC : 0 | BS EN 54-23 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 23: FIRE ALARM DEVICES - VISUAL ALARMS |
| UNE-EN 50541-1:2012 | Three phase dry-type distribution transformers 50 Hz, from 100 kVA to 3 150 kVA, with highest voltage for equipment not exceeding 36 kV - Part 1: General requirements |
| I.S. EN 50486:2008 | EQUIPMENT FOR USE IN AUDIO AND VIDEO DOOR-ENTRY SYSTEMS |
| I.S. EN 62108:2016 | CONCENTRATOR PHOTOVOLTAIC (CPV) MODULES AND ASSEMBLIES - DESIGN QUALIFICATION AND TYPE APPROVAL |
| 07/30163662 DC : 0 | BS EN 778 - DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 70 KW, WITHOUT A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR AND/OR COMBUSTION PRODUCTS |
| CEI EN 60092-507 : 2016 | ELECTRICAL INSTALLATIONS IN SHIPS - PART 507: SMALL VESSELS |
| 12/30244743 DC : 0 | BS EN 15954-2 - RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| 09/30180290 DC : 0 | BS EN 1247:2004/A1 - FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR LADLES, POURING EQUIPMENT, CENTRIFUGAL CASTING MACHINES, CONTINUOUS AND SEMI CONTINUOUS CASTING MACHINES |
| CEI EN 61076-3-116 : 2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-116: RECTANGULAR CONNECTORS - PROTECTIVE HOUSINGS FOR USE WITH 8- WAY SHIELDED AND UNSHIELDED CONNECTORS FOR FREQUENCIES UP TO 600 MHZ FOR INDUSTRIAL ENVIRONMENTS INCORPORATING THE IEC 60603-7 SERIES INTERFACE - VARIANT 13 RELATED TO IEC 61076-3-106 - LOCKING LEVER |
| 08/30176065 DC : DRAFT JAN 2008 | BS EN 50194-1 - ELECTRICAL APPARATUS FOR THE DETECTION OF COMBUSTIBLE GASES IN DOMESTIC PREMISES - PART 1: TEST METHODS AND PERFORMANCE REQUIREMENTS |
| BS EN 12966:2014 | Road vertical signs. Variable message traffic signs |
| I.S. EN 50131-2-2:2017 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-2: INTRUSION DETECTORS - PASSIVE INFRARED DETECTORS |
| 08/30186439 DC : DRAFT SEP 2008 | BS EN 15869-2 - INLAND NAVIGATION VESSELS - ELECTRICAL SHORE CONNECTION, THREE-PHASE CURRENT 400 V, UP TO 32 A, 50 HZ - PART 2: ONSHORE UNIT, SAFETY REQUIREMENTS |
| CEI EN 61754-20-100 : 2013 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 20-100: INTERFACE STANDARD FOR LC CONNECTORS WITH PROTECTIVE HOUSINGS RELATED TO IEC 61076-3-106 |
| CEI EN 61534-1 : 2012 | POWERTRACK SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| PREN 1859 : DRAFT 2008 | CHIMNEYS - METAL CHIMNEYS - TEST METHODS |
| PREN 54-10 : DRAFT 2012 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 10: FLAME DETECTORS - POINT DETECTORS |
| PREN 12050-2 : DRAFT 2012 | WASTEWATER LIFTING PLANTS FOR BUILDINGS AND SITES - PRINCIPLES OF CONSTRUCTION AND TESTING - PART 2: LIFTING PLANTS FOR FAECAL-FREE WASTEWATER |
| PD CEN/TR 16251:2016 | Railway applications. Environmental conditions. Design guidance for rolling stock |
| CEI EN 50379-3 : 2012 | SPECIFICATION FOR PORTABLE ELECTRICAL APPARATUS DESIGNED TO MEASURE COMBUSTION FLUE GAS PARAMETERS OF HEATING APPLIANCES - PART 3: PERFORMANCE REQUIREMENTS FOR APPARATUS USED IN NON-STATUTORY SERVICING OF GAS FIRED HEATING APPLIANCES |
| I.S. HD 60269-3:2010 | LOW-VOLTAGE FUSES - PART 3: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY UNSKILLED PERSONS (FUSES MAINLY FOR HOUSEHOLD AND SIMILAR APPLICATIONS) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO F (IEC 60269-3:2010 (MOD)) |
| 09/30197984 DC : 0 | BS EN 1807-2 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 2: LOG SAWING MACHINES |
| BS EN 50281-1-2:1999 | Electrical apparatus for use in the presence of combustible dust. Electrical apparatus protected by enclosures Selection, installation and maintenance |
| CEI EN 62561-6 : 2012 | LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 6: REQUIREMENTS FOR LIGHTNING STRIKE COUNTERS (LSC) |
| CEI EN 62271-204 : 2012 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 204: RIGID GAS-INSULATED TRANSMISSION LINES FOR RATED VOLTAGES ABOVE 52 KV |
| 15/30298489 DC : 0 | BS EN 50124-1 - RAILWAY APPLICATIONS - INSULATION COORDINATION - PART 1: BASIC REQUIREMENTS - CLEARANCES AND CREEPAGE DISTANCES FOR ALL ELECTRICAL AND ELECTRONIC EQUIPMENT |
| BS EN 60077-2:2017 | Railway applications. Electric equipment for rolling stock Electrotechnical components. General rules |
| 11/30251971 DC : 0 | BS EN 12041 - FOOD PROCESSING MACHINERY - MOULDERS - SAFETY AND HYGIENE REQUIREMENTS |
| CEI EN 50125-2 : 2003 | RAILWAY APPLICATIONS - ENVIRONMENTAL CONDITIONS FOR EQUIPMENT - PART 2: FIXED ELECTRICAL INSTALLATIONS |
| PREN 474-1 : DRAFT 2017 | EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| 14/30301269 DC : 0 | BS EN 13160-6 - LEAK DETECTION SYSTEMS - PART 6: SENSORS IN MONITORING WELLS |
| BS EN 61754-20-100:2012 | Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces Interface standard for LC connectors with protective housings related to IEC 61076-3-106 |
| BS EN 50490:2008 | Electrical installations for lighting and beaconing of aerodromes. Technical requirements for aeronautical ground lighting control and monitoring systems. Units for selective switching and monitoring of individual lamps |
| 10/30218875 DC : 0 | BS EN 50130-5:2010 - ALARM SYSTEMS - PART 5: ENVIRONMENTAL TEST METHODS |
| PD CLC/TS 50131-2-9:2016 | Alarm systems. Intrusion and hold-up systems Intrusion detectors. Active infrared beam detectors |
| BS EN 60335-2-71:2003 | Household and similar electrical appliances. Safety Particular requirements for electrical heating appliances for breeding and rearing animals |
| BS EN 50131-2-7-2 : 2012 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-2: INTRUSION DETECTORS - GLASS BREAK DETECTORS (PASSIVE) |
| BS EN 61287-1:2014 | Railway applications. Power converters installed on board rolling stock Characteristics and test methods |
| 09/30184483 DC : 0 | BS EN 54-3 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 3: FIRE ALARM DEVICES - SOUNDERS |
| 13/30276226 DC : 0 | BS EN 16564 - MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS |
| BS EN 15180:2014 | Food processing machinery. Food depositors. Safety and hygiene requirements |
| 08/30189631 DC : DRAFT SEP 2008 | BS EN 50215 - RAILWAY APPLICATIONS - ROLLING STOCK - TESTING OF ROLLING STOCK ON COMPLETION OF CONSTRUCTION AND BEFORE ENTRY INTO SERVICE |
| BS EN 50107:1998 | Signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV |
| PREN 50119 : DRAFT 2017 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES |
| PREN 12043 : DRAFT 2012 | FOOD PROCESSING MACHINERY - INTERMEDIATE PROVERS - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 60092-507:2015 | Electrical installations in ships Small vessels |
| BS EN 16864:2017 | Building hardware. Mechatronic padlocks. Requirements and test methods |
| NF EN 62020 : 1999 AMD 1 2005 | ELECTRICAL ACCESSORIES - RESIDUAL CURRENT MONITORS FOR HOUSEHOLD AND SIMILAR USES (RCMS) |
| BS EN 50194:2000 | Electrical apparatus for the detection of combustible gases in domestic premises. Test methods and performance requirements |
| 99/241254 DC : DRAFT APR 99 | THERMOMETERS FOR MEASURING THE AIR AND PRODUCT TEMPERATURE FOR THE TRANSPORT, STORAGE AND DISTRIBUTION OF CHILLED, FROZEN, DEEP-FROZEN/QUICK-FROZEN FOOD AND ICE CREAM - TESTS, PERFORMANCE, SUITABILITY. |
| 99/240940 DC : 0 | BS EN 50331-1 - PHOTOVOLTAIC SYSTEMS IN BUILDINGS - PART 1: SAFETY REQUIREMENTS |
| I.S. EN 1870-18:2013 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 18: DIMENSION SAWS |
| DIN EN 60068-2-18 : 2001 | ENVIRONMENTAL TESTING - PART 2-18: TESTS - TEST R AND GUIDANCE: WATER (IEC 60068-2-18:2017) |
| I.S. EN 61076-7-100:2006 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 7-100: CABLE OUTLET ACCESSORIES - DETAIL SPECIFICATION FOR A METRIC CABLE SEALING CONSISTING OF AN INTEGRATED PART OF HEAVY-DUTY RECTANGULAR OR CIRCULAR CONNECTOR HOODS AND A SEALING SYSTEM |
| EN IEC 61730-1:2018/AC:2018-06 | PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION (IEC 61730-1:2016) |
| BS EN 50107-1:2002 | Signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV General requirements |
| PREN 12405-3 : DRAFT 2013 | GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER |
| BS EN 13035-11 : 2006 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 11: DRILLING MACHINES |
| PREN 15654-1 : DRAFT 2015 | RAILWAY APPLICATIONS - MEASUREMENT OF VERTICAL FORCES ON WHEELS AND WHEELSETS - PART 1: INTEROPERABLE ON-TRACK MEASUREMENT SITES FOR VEHICLES IN SERVICE |
| 99/711929 DC : DRAFT JUL 1999 | EN 13621 - FOOD PROCESSING MACHINERY - SALAD DRYERS - SAFETY AND HYGIENE REQUIREMENTS |
| 98/201910 DC : DRAFT APRIL 1998 | PREN 50297 - PHOTOELECTRIC CONTROL UNITS FOR ROAD AND STREET LIGHTING |
| CEI EN 61754-27 : 2014 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 27: TYPE M12-FO CONNECTOR FAMILY |
| BS EN 50131-2-5:2008 | Alarm systems. Intrusion and hold-up systems Requirements for combined passive infrared and ultrasonic detectors |
| 03/314480 DC : DRAFT SEP 2003 | EN 50065-4-7 - SIGNALLING ON LOW-VOLTAGE ELECTRICAL INSTALLATIONS IN THE FREQUENCY RANGE 3 KHZ TO 148,5 KHZ AND FROM 1,6 MHZ TO 30 MHZ - PART 4-7: SAFETY OF PORTABLE FILTERS |
| BS EN 50446:2006 | Straight thermocouple assembly with metal or ceramic protection tube and accessories |
| UNE-EN 61534-1:2011 | Powertrack systems -- Part 1: General requirements |
| PREN 50600-2-5 : DRAFT 2012 | BS EN 50600-2-5 - DATA CENTRE FACILITIES AND INFRASTRUCTURES - PART 2-5: SECURITY SYSTEMS |
| CEI EN 61076-7-100 : 2007 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS PART 7-100: CABLE OUTLET ACCESSORIES - DETAIL SPECIFICATION FOR A METRIC CABLE SEALING CONSISTING OF AN INTEGRATED PART OF HEAVY-DUTY RECTANGULAR OR CIRCULAR CONNECTOR HOODS AND A SEALING SYSTEM |
| UNE-EN 12899-2:2010 | Fixed, vertical road traffic signs - Part 2: Transilluminated traffic bollards (TTB) |
| CEI EN 62252 : 2005 | MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - RADAR FOR CRAFT NOT IN COMPLIANCE WITH IMO SOLAS CHAPTER V - PERFORMANCE REQUIREMENTS, METHODS OF TEST AND REQUIRED TEST RESULTS |
| CEI EN 50512 : 2014 | ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - ADVANCED VISUAL DOCKING GUIDANCE SYSTEMS (A-VDGS) |
| 04/30111616 DC : 0 | EN 81-40 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 40: STAIRLIFTS AND INCLINED LIFTING PLATFORMS INTENDED FOR PERSONS WITH IMPAIRED MOBILITY |
| UNI EN 81-40 : 2009 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 40: STAIR LIFTS AND INCLINED LIFTING PLATFORMS INTENDED FOR PERSONS WITH IMPAIRED MOBILITY |
| 02/106353 DC : DRAFT OCT 2002 | EN 12966-1 - VERTICAL ROAD TRAFFIC SIGNS - PART 1: VARIABLE MESSAGE SIGNS |
| I.S. EN 61557-16:2015 | ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 16: EQUIPMENT FOR TESTING THE EFFECTIVENESS OF THE PROTECTIVE MEASURES OF ELECTRICAL EQUIPMENT AND/OR MEDICAL ELECTRICAL EQUIPMENT |
| 04/30115503 DC : DRAFT JUN 2004 | EN 14986 - DESIGN OF FANS WORKING IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
| CEI EN 50291 : 2002 | ELECTRICAL APPARATUS FOR THE DETECTION OF CARBON MONOXIDE IN DOMESTIC PREMISES TEST METHODS AND PERFORMANCE REQUIREMENTS |
| I.S. EN 50123-4:2003 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SWITCHGEAR - PART 4: OUTDOOR D.C. DISCONNECTORS, SWITCH-DISCONNECTORS AND EARTHING SWITCHES |
| CEI EN 50369 : 2006 | LIQUID TIGHT SHEATHING SYSTEMS FOR CABLE MANAGEMENT |
| 07/30166909 DC : DRAFT AUG 2007 | BS EN 15714-2 - INDUSTRIAL VALVES - ACTUATORS - PART 2: ELECTRIC ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| UNI EN 15270 : 2008 | PELLET BURNERS FOR SMALL HEATING BOILERS - DEFINITIONS, REQUIREMENTS, TESTING, MARKING |
| PREN ISO 12696 : DRAFT 2009 | CATHODIC PROTECTION OF STEEL IN CONCRETE |
| CEI EN 50483-4 : 2011 | TEST REQUIREMENTS FOR LOW VOLTAGE AERIAL BUNDLED CABLE ACCESSORIES - PART 4: CONNECTORS |
| DIN EN 1807-1:2013-06 | Safety of woodworking machines - Band sawing machines - Part 1: Table band saws and band re-saws |
| DIN EN 45510-2-7:2003-12 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-7: ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR |
| BS EN 12098-1:2017 | Energy Performance of Buildings. Controls for heating systems Control equipment for hot water heating systems. Modules M3-5, 6, 7, 8 |
| PREN 13060 : DRAFT 2012 | SMALL STEAM STERILIZERS |
| DIN EN 15861:2013-06 | Food processing machinery - Smokehouses - Safety and hygiene requirements |
| DIN EN 15774:2011-10 | Food processing machinery - Machines for processing fresh and filled pasta (tagliatelle, cannelloni, ravioli, tortellini, orecchiette and gnocchi) - Safety and hygiene requirements |
| PREN 15194 : DRAFT 2015 | CYCLES - ELECTRICALLY POWER ASSISTED CYCLES - EPAC BICYCLES |
| PREN 15572 : DRAFT 2013 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES |
| PREN 50134-3 : DRAFT 2009 | ALARM SYSTEMS - SOCIAL ALARM SYSTEMS - PART 3: LOCAL UNIT AND CONTROLLER |
| UNE-EN 45545-1:2013 | Railway applications - Fire protection on railway vehicles - Part 1: General |
| EN 61439-1:2011 | Low-voltage switchgear and controlgear assemblies - Part 1: General rules |
| CEI EN 62549 : 2012 | ARTICULATED SYSTEMS AND FLEXIBLE SYSTEMS FOR CABLE GUIDING |
| UNE-EN 12405-1:2006 | Gas meters - Conversion devices - Part 1: Volume conversion |
| UNE-EN 50467:2012 | Railway applications - Rolling stock - Electrical connectors, requirements and test methods |
| I.S. EN 60044-8:2002 | INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSFORMERS |
| VDE 0711-2-4 : 1998 | LUMINAIRES - PART 2: PARTICULAR REQUIREMENTS; SECTION 4: PORTABLE GENERAL PURPOSE LUMINAIRES |
| BS EN 62368-1 : 2014 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
| NF EN 50122-1 : 2011 AMD 4 2018 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRICAL SAFETY, EARTHING AND THE RETURN CIRCUIT - PART 1: PROTECTIVE PROVISIONS AGAINST ELECTRIC SHOCK |
| I.S. EN 50131-2-8:2016 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-8: INTRUSION DETECTORS - SHOCK DETECTORS |
| EN 15339-2:2007 | Thermal spraying - Safety requirements for thermal spraying equipment - Part 2: Gas control units |
| DIN EN 16486:2014-10 | MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS |
| DIN EN 81-31:2010-08 | Safety rules for the construction and installation of lifts - Lifts for the transport of goods only - Part 31: Accessible goods only lifts |
| I.S. EN 61754-24-11:2009 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 24-11: TYPE SC-RJ CONNECTORS WITH PROTECTIVE HOUSINGS BASED ON IEC 61076-3-117 |
| EN 81-41:2010 | Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 41: Vertical lifting platforms intended for use by persons with impaired mobility |
| I.S. EN 62109-1:2010 | SAFETY OF POWER CONVERTERS FOR USE IN PHOTOVOLTAIC POWER SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 61076-3-106:2006 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-106: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR PROTECTIVE HOUSINGS FOR USE WITH 8-WAY SHIELDED AND UNSHIELDED CONNECTORS FOR INDUSTRIAL ENVIRONMENTS INCORPORATING THE IEC 60603-7 SERIES INTERFACE |
| BS EN 62040-1 : 2008 | UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 1: GENERAL AND SAFETY REQUIREMENTS FOR UPS |
| I.S. EN 12649:2008 | CONCRETE COMPACTORS AND SMOOTHING MACHINES - SAFETY |
| BS EN 60728-11:2017 | Cable networks for television signals, sound signals and interactive services Safety |
| I.S. EN 50176:2009 | STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE LIQUID COATING MATERIAL - SAFETY REQUIREMENTS |
| CEI EN 50155 : 2008 | RAILWAY APPLICATIONS - ELECTRONIC EQUIPMENT USED ON ROLLING STOCK |
| PREN 50131-2-10 : DRAFT 2017 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-10: INTRUSION DETECTORS - LOCK STATE CONTACTS (MAGNETIC) |
| CEI EN 61995-1 : 2009 | DEVICES FOR THE CONNECTION OF LUMINAIRES FOR HOUSEHOLD AND SIMILAR PURPOSES - PART 1: GENERAL REQUIREMENTS |
| BS EN 62271-200:2012 | High-voltage switchgear and controlgear AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV |
| S.R. CLC/TS 50131-2-7-3:2009 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-3: INTRUSION DETECTORS - GLASS BREAK DETECTORS (ACTIVE) |
| PREN 15163 : DRAFT 2014 | MACHINES AND INSTALLATIONS FOR THE EXPLOITATION AND PROCESSING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR DIAMOND WIRE SAWS AND DIAMOND MULTI-WIRE SAWS |
| I.S. EN 16864:2017 | BUILDING HARDWARE - MECHATRONIC PADLOCKS - REQUIREMENTS AND TEST METHODS |
| BS EN 16005:2012 | Power operated pedestrian doorsets. Safety in use. Requirements and test methods |
| I.S. EN 415-10:2014 | SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS |
| PREN 303-1 : DRAFT 2016 | HEATING BOILERS - PART 1: HEATING BOILERS WITH FORCED DRAUGHT BURNERS - TERMINOLOGY, GENERAL REQUIREMENTS, TESTING AND MARKING |
| I.S. EN 60400:2017 | LAMPHOLDERS FOR TUBULAR FLUORESCENT LAMPS AND STARTERHOLDERS |
| I.S. EN 60694:1999 | COMMON SPECIFICATIONS FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDS |
| I.S. EN 60335-2-23:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-23: PARTICULAR REQUIREMENTS FOR APPLIANCES FOR SKIN OR HAIR CARE |
| S.R. HD 60364-5-51:2009 | ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 5-51: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - COMMON RULES |
| I.S. EN 61386-1:2008 | CONDUIT SYSTEMS FOR CABLE MANAGEMENT - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 50110-1:2013 | OPERATION OF ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS |
| S.R. CLC/TS 50083-2-3:2018 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 2-3: LTE (4G) INTERFERENCE MITIGATION FILTERS |
| I.S. EN 1570-2:2016 | SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 2: LIFTING TABLES SERVING MORE THAN 2 FIXED LANDINGS OF A BUILDING, FOR LIFTING GOODS WITH A VERTICAL TRAVEL SPEED NOT EXCEEDING 0,15 M/S |
| I.S. EN 60309-1:1999 | PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSES - PART 1: GENERAL REQUIREMENTS (IEC 60309-1:1999 (EQV)) |
| I.S. EN 14154-4:2014 | WATER METERS - PART 4: ADDITIONAL FUNCTIONALITIES |
| I.S. EN 50019:2001 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - INCREASED SAFETY "E" |
| CEI EN 50463-3 : 2013 | RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 3: DATA HANDLING |
| I.S. EN 50365:2002 | ELECTRICALLY INSULATING HELMETS FOR USE ON LOW VOLTAGE INSTALLATIONS |
| I.S. EN 60439-1:2000 | LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1 - TYPE TESTED AND PARTIALLY TYPE TESTED ASSEMBLIES |
| CEI EN 61095 : 2010 | ELECTROMECHANICAL CONTACTORS FOR HOUSEHOLD AND SIMILAR PURPOSES |
| BS EN 61643-21 : 2001 | LOW VOLTAGE SURGE PROTECTIVE DEVICES - PART 21: SURGE PROTECTIVE DEVICES CONNECTED TO TELECOMMUNICATIONS AND SIGNALLING NETWORKS - PERFORMANCE REQUIREMENTS AND TESTING METHODS |
| I.S. HD 60364-7-702:2010 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-702: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - SWIMMING POOLS AND FOUNTAINS |
| PREN 1870-12 : DRAFT 2011 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 12: PENDULUM CROSS-CUT SAWING MACHINES |
| I.S. EN 61076-3-117:2009 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-117: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR PROTECTIVE HOUSINGS OR USE WITH 8-WAY SHIELDED AND UNSHIELDED CONNECTORS FOR INDUSTRIAL ENVIRONMENTS INCORPORATING THE IEC 60603-7 SERIES INTERFACE - VARIANT 14 RELATED TO IEC 61076-3-106 - PUSH-PULL COUPLING |
| I.S. EN 60598-2-20:2015 | LUMINAIRES - PART 2-20: PARTICULAR REQUIREMENTS - LIGHTING CHAINS |
| I.S. EN 1807-2:2013 | SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 2: LOG SAWING MACHINES |
| I.S. EN 60076-11:2004 | POWER TRANSFORMERS - PART 11: DRY-TYPE TRANSFORMERS |
| I.S. EN 1570-1:2011 | SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 1: LIFTING TABLES SERVING UP TO TWO FIXED LANDINGS |
| EN 61032:1998 | Protection of persons and equipment by enclosures - Probes for verification |
| I.S. EN 61058-1:2002 | SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS |
| CEI CLC/TS 50537-2 : 2011 | RAILWAY APPLICATIONS - MOUNTED PARTS OF THE TRACTION TRANSFORMER AND COOLING SYSTEM - PART 2: PUMP FOR INSULATING LIQUID FOR TRACTION TRANSFORMERS AND REACTORS |
| I.S. EN 50123-1:2003 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SWITCHGEAR - GENERAL |
| I.S. EN 61048:2006 | AUXILIARIES FOR LAMPS - CAPACITORS FOR USE IN TUBULAR FLUORESCENT AND OTHER DISCHARGE LAMP CIRCUITS - GENERAL AND SAFETY REQUIREMENTS |
| BS EN 61242 : 1998 | ELECTRICAL ACCESSORIES - CABLE REELS FOR HOUSEHOLD AND SIMILAR PURPOSES |
| BS EN 60079-19 : 2011 | EXPLOSIVE ATMOSPHERES - PART 19: EQUIPMENT REPAIR, OVERHAUL AND RECLAMATION |
| I.S. EN 16564:2014 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES, INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS |
| I.S. EN 16479:2014 | WATER QUALITY - PERFORMANCE REQUIREMENTS AND CONFORMITY TEST PROCEDURES FOR WATER MONITORING EQUIPMENT - AUTOMATED SAMPLING DEVICES (SAMPLERS) FOR WATER AND WASTE WATER |
| I.S. EN 16500:2014 | MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS |
| EN 62271-1:2017 | High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear |
| I.S. EN 62586-1:2017 | POWER QUALITY MEASUREMENT IN POWER SUPPLY SYSTEMS - PART 1: POWER QUALITY INSTRUMENTS (PQI) |
| BS EN 60838-1 : 2017 | MISCELLANEOUS LAMPHOLDERS - PART 1: GENERAL REQUIREMENTS AND TESTS (IEC 60838-1:2016) |
| BS EN 50539-11 : 2013 | LOW-VOLTAGE SURGE PROTECTIVE DEVICES - SURGE PROTECTIVE DEVICES FOR SPECIFIC APPLICATION INCLUDING D.C. - PART 11: REQUIREMENTS AND TESTS FOR SPDS IN PHOTOVOLTAIC APPLICATIONS |
| S.R. CLC/TS 50537-2:2010 | RAILWAY APPLICATIONS - MOUNTED PARTS OF THE TRACTION TRANSFORMER AND COOLING SYSTEM - PART 2: PUMP FOR INSULATING LIQUID FOR TRACTION TRANSFORMERS AND REACTORS |
| BS EN 61730-1 : 2007 | PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION |
| I.S. EN 16282-2:2016 | EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 2: KITCHEN VENTILATION HOODS - DESIGN AND SAFETY REQUIREMENTS |
| I.S. EN 15420:2010 | GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT EXCEEDING 70 KW, BUT NOT EXCEEDING 1000 KW |
| I.S. EN 1829-1:2010 | HIGH PRESSURE WATER JET MACHINES - SAFETY REQUIREMENTS - PART 1: MACHINES |
| BS EN 50153 : 2014 | RAILWAY APPLICATIONS - ROLLING STOCK - PROTECTIVE PROVISIONS RELATING TO ELECTRICAL HAZARDS |
| I.S. EN 60335-2-71:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-71: PARTICULAR REQUIREMENTS FOR ELECTRICAL HEATING APPLIANCES FOR BREEDING AND REARING ANIMALS |
| I.S. EN 50467:2011 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS |
| EN 13216-1:2004 | Chimneys - Test methods for system chimneys - Part 1: General test methods |
| I.S. EN 61347-1:2015 | LAMP CONTROLGEAR - PART 1: GENERAL AND SAFETY REQUIREMENTS |
| I.S. EN 16207:2014 | RAILWAY APPLICATIONS - BRAKING - FUNCTIONAL AND PERFORMANCE CRITERIA OF MAGNETIC TRACK BRAKE SYSTEMS FOR USE IN RAILWAY ROLLING STOCK |
| I.S. EN 62271-200:2012 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 200: A.C. METAL-ENCLOSED SWITCHGEAR AND CONTROLGEAR FOR RATED VOLTAGES ABOVE 1 KV AND UP TO AND INCLUDING 52 KV (IEC 62271-200:2011 (EQV)) |
| BS EN 12405-1 : 2005 | GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| BS EN 50291-1 : 2010 | ELECTRICAL APPARATUS FOR THE DETECTION OF CARBON MONOXIDE IN DOMESTIC PREMISES - PART 1: TEST METHODS AND PERFORMANCE REQUIREMENTS |
| BS EN 50545-1 : 2011 | ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF TOXIC AND COMBUSTIBLE GASES IN CAR PARKS AND TUNNELS - PART 1: GENERAL PERFORMANCE REQUIREMENTS AND TEST METHODS FOR THE DETECTION AND MEASUREMENT OF CARBON MONOXIDE AND NITROGEN OXIDES |
| BS EN 50548 : 2011 | JUNCTION BOXES FOR PHOTOVOLTAIC MODULES |
| I.S. EN 62271-212:2017 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 212: COMPACT EQUIPMENT ASSEMBLY FOR DISTRIBUTION SUBSTATION (CEADS) |
| UNE-EN 60974-6:2011 | Arc welding equipment - Part 6: Limited duty equipment |
| I.S. EN 61241-1:2004 | ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 1: PROTECTION BY ENCLOSURES "TD" |
| UNE-EN 50543:2011 | Electronic portable and transportable apparatus designed to detect and measure carbon dioxide and/or carbon monoxide in indoor ambient air - Requirements and test methods |
| I.S. EN 60998-2-1:2004 | CONNECTING DEVICES FOR LOW-VOLTAGE CIRCUITS FOR HOUSEHOLD AND SIMILAR PURPOSES - PART 2-1: PARTICULAR REQUIREMENTS FOR CONNECTING DEVICES AS SEPARATE ENTITIES WITH SCREW-TYPE CLAMPING UNITS |
| I.S. EN 61557-1:2007 | ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 15714-2:2009 | INDUSTRIAL VALVES - ACTUATORS - PART 2: ELECTRIC ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| BS EN 60238 : 2004 | EDISON SCREW LAMPHOLDERS |
| I.S. EN 50164-6:2009 | LIGHTNING PROTECTION COMPONENTS (LPC) - PART 6: REQUIREMENTS FOR LIGHTNING STRIKE COUNTERS |
| I.S. EN 15949:2012 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR BAR MILLS, STRUCTURAL STEEL MILLS AND WIRE ROD MILLS |
| I.S. EN 61076-3-116:2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-116: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR PROTECTIVE HOUSINGS FOR USE WITH 8-WAY SHIELDED AND UNSHIELDED CONNECTORS FOR FREQUENCIES UP TO 600 MHZ FOR INDUSTRIAL ENVIRONMENTS INCORPORATING THE IEC 60603-7 SERIES INTERFACE - VARIANT 13 RELATED TO IEC 61076-3-106 - LOCKING LEVER |
| CEI EN 50379-1 : 2012 | SPECIFICATION FOR PORTABLE ELECTRICAL APPARATUS DESIGNED TO MEASURE COMBUSTION FLUE GAS PARAMETERS OF HEATING APPLIANCES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
| I.S. EN 60770-3:2014 | TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 3: METHODS FOR PERFORMANCE EVALUATION OF INTELLIGENT TRANSMITTERS |
| I.S. EN 16009:2011 | FLAMELESS EXPLOSION VENTING DEVICES |
| CEI EN 50131-2-3 : 2009 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-3: REQUIREMENTS FOR MICROWAVE DETECTORS |
| PREN 15650 : DRAFT 2017 | VENTILATION FOR BUILDINGS - FIRE DAMPERS |
| BS EN 62013-1:2006 | Caplights for use in mines susceptible to firedamp General requirements. Construction and testing in relation to the risk of explosion |
| UNE-EN 1459-2:2016 | Rough-terrain trucks - Safety requirements and verification - Part 2: Slewing variable-reach trucks |
| 17/30332894 DC : 0 | BS EN 17082 - DOMESTIC AND NON-DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW |
| I.S. EN 60974-7:2013 | ARC WELDING EQUIPMENT - PART 7: TORCHES (IEC 60974-7:2013 (EQV)) |
| BS EN 50174-3 : 2013 | INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS |
| I.S. EN 15861:2012 | FOOD PROCESSING MACHINERY - SMOKEHOUSES - SAFETY AND HYGIENE REQUIREMENTS |
| PREN 16925 : DRAFT 2015 | FIXED FIREFIGHTING SYSTEMS - AUTOMATIC RESIDENTIAL SPRINKLER SYSTEMS - DESIGN, INSTALLATION AND MAINTENANCE |
| UNI CEI EN 45545-1 : 2013 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 1: GENERAL |
| CEI EN 50365 : 2004 | ELECTRICALLY INSULATING HELMETS FOR USE ON LOW VOLTAGE INSTALLATIONS |
| BS EN 50021:1999 | Electrical apparatus for potentially explosive atmospheres. Type of prot ection \'n\' |
| I.S. EN 15502-1:2012 | GAS-FIRED HEATING BOILERS - PART 1: GENERAL REQUIREMENTS AND TESTS |
| BS EN 50206-2:2010 | Railway applications. Rolling stock. Pantographs. Characteristics and tests Pantographs for metros and light rail vehicles |
| NF EN 50216-12 : 2011 | POWER TRANSFORMER AND REACTOR FITTINGS - PART 12: FANS |
| I.S. EN 61851-1:2011 | ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 1: GENERAL REQUIREMENTS |
| DIN EN 12845:2016-04 | FIXED FIREFIGHTING SYSTEMS - AUTOMATIC SPRINKLER SYSTEMS - DESIGN, INSTALLATION AND MAINTENANCE |
| I.S. EN 50131-2-7-1:2012 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-1: INTRUSION DETECTORS - GLASS BREAK DETECTORS (ACOUSTIC) |
| I.S. EN 62841-1:2015 | ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| UNE-EN 16678:2016 | Safety and control devices for gas burners and gas burning appliances - Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa |
| I.S. EN IEC 61730-1:2018 | PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION |
| UNI EN 15180 : 2014 | FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS |
| 16/30341165 DC : 0 | BS EN 14492-2 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| UNE-EN 50050-3:2014 | Electrostatic hand-held spraying equipment - Safety requirements - Part 3: Hand-held spraying equipment for ignitable flock |
| DIN EN 15595:2015-11 (Draft) | RAILWAY APPLICATIONS - BRAKING - WHEEL SLIDE PROTECTION |
| I.S. EN 14989-2:2007 | CHIMNEYS - REQUIREMENTS AND TEST METHODS FOR METAL CHIMNEYS AND MATERIAL INDEPENDENT AIR SUPPLY DUCTS FOR ROOM SEALED HEATING APPLICATIONS - PART 2: FLUE AND AIR SUPPLY DUCTS FOR ROOM SEALED APPLIANCES |
| UNE-EN 62752:2017 | In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD) |
| UNI EN 1648-2 : 2012 | LEISURE ACCOMMODATION VEHICLES - 12 V DIRECT CURRENT EXTRA LOW VOLTAGE ELECTRICAL INSTALLATIONS - PART 2: MOTOR CARAVANS |
| UNE-EN 50379-1:2012 | Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances - Part 1: General requirements and test methods |
| 17/30356734 DC : 0 | BS EN 14236 - ULTRASONIC DOMESTIC GAS METERS |
| I.S. EN 60945:2002 | MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - GENERAL REQUIREMENTS - METHODS OF TESTING AND REQUIRED TEST RESULTS |
| I.S. EN 50088:1996 | SAFETY OF ELECTRIC TOYS |
| CEI EN 61557-1 : 2008 | ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 1: GENERAL REQUIREMENTS |
| BS EN 1459-1:2017 | Rough-terrain trucks. Safety requirements and verification Variable-reach trucks |
| DIN EN 15746-2:2016-02 (Draft) | Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements; German and English version prEN 15746-2:2015 |
| BS EN 15595 : 2009 | RAILWAY APPLICATIONS - BRAKING - WHEEL SLIDE PROTECTION |
| I.S. EN 61241-11:2007 | ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 11: PROTECTION BY INTRINSIC SAFETY "ID" |
| 17/30353876 DC : 0 | BS EN 1463-3 - ROAD MARKING MATERIALS - PART 3: ACTIVE ROAD STUDS |
| BS EN 16839:2017 | Railway applications. Rolling stock. Head stock layout |
| 17/30351978 DC : 0 | BS EN 12830 - TEMPERATURE RECORDERS FOR THE TRANSPORT, STORAGE AND DISTRIBUTION OF TEMPERATURE SENSITIVE GOODS - TESTS, PERFORMANCE, SUITABILITY |
| UNE-HD 60364-7-702:2013 | Low-voltage electrical installations -- Part 7-702: Requirements for special installations or locations - Swimming pools and fountains |
| UNE-EN 16500:2015 | Machines for compacting waste materials or recyclable fractions - Vertical baling presses - Safety requirements |
| BS EN 62683:2015 | Low-voltage switchgear and controlgear. Product data and properties for information exchange |
| UNE-EN 1459-1:2018 | Rough-terrain trucks - Safety requirements and verification - Part 1: Variable-reach trucks |
| FD CEN/TS 81-83 : 2010 FD | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - EXISTING LIFTS - PART 83: RULES FOR THE IMPROVEMENT OF THE RESISTANCE AGAINST VANDALISM |
| EN 12261:2018 | Gas meters - Turbine gas meters |
| EN 1459-1:2017 | Rough-terrain trucks - Safety requirements and verification - Part 1: Variable-reach trucks |
| I.S. EN 15595:2009 | RAILWAY APPLICATIONS - BRAKING - WHEEL SLIDE PROTECTION |
| BS EN 12453:2001 | Industrial, commercial and garage doors and gates. Safety in use of power operated doors. Requirements |
| UNE-EN 60968:2015 | Self-ballasted fluorescent lamps for general lighting services - Safety requirements |
| UNE-EN 61287-1:2015 | Railway applications - Power converters installed on board rolling stock - Part 1: Characteristics and test methods |
| UNE-EN 16479:2014 | Water quality - Performance requirements and conformity test procedures for water monitoring equipment - Automated sampling devices (samplers) for water and waste water |
| I.S. EN 50545-1:2011 | ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF TOXIC AND COMBUSTIBLE GASES IN CAR PARKS AND TUNNELS - PART 1: GENERAL PERFORMANCE REQUIREMENTS AND TEST METHODS FOR THE DETECTION AND MEASUREMENT OF CARBON MONOXIDE AND NITROGEN OXIDES |
| CEI EN 61076-3-106 : 2007 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-106: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR PROTECTIVE HOUSINGS FOR USE WITH 8-WAY SHIELDED AND UNSHIELDED CONNECTORS FOR INDUSTRIAL ENVIRONMENTS INCORPORATING THE IEC 60603-7 SERIES INTERFACE |
| I.S. HD 62640:2015 | RESIDUAL CURRENT DEVICES WITH OR WITHOUT OVERCURRENT PROTECTION FOR SOCKET-OUTLETS FOR HOUSEHOLD AND SIMILAR USES |
| CEI EN 50215 : 2011 | RAILWAY APPLICATIONS - ROLLING STOCK - TESTING OF ROLLING STOCK ON COMPLETION OF CONSTRUCTION AND BEFORE ENTRY INTO SERVICE |
| NF EN 15714-4 : 2009 | INDUSTRIAL VALVES - ACTUATORS - PART 4: HYDRAULIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| I.S. EN 41003:2008 | PARTICULAR SAFETY REQUIREMENTS FOR EQUIPMENT TO BE CONNECTED TO TELECOMMUNICATION NETWORKS AND/OR A CABLE DISTRIBUTION SYSTEM |
| I.S. EN 50328:2007 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRONIC POWER CONVERTERS FOR SUBSTATIONS |
| I.S. EN 50524:2009 | DATA SHEET AND NAME PLATE FOR PHOTOVOLTAIC INVERTERS |
| I.S. EN 50522:2010 | EARTHING OF POWER INSTALLATIONS EXCEEDING 1 KV A.C. |
| EN 60079-19:2011/A1:2015 | EXPLOSIVE ATMOSPHERES - PART 19: EQUIPMENT REPAIR, OVERHAUL AND RECLAMATION (IEC 60079-19:2010) |
| I.S. EN 61958:2001 | HIGH-VOLTAGE PREFABRICATED SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - VOLTAGE PRESENCE INDICATING SYSTEMS |
| I.S. EN 50512:2009 | ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - ADVANCED VISUAL DOCKING GUIDANCE SYSTEMS (A-VDGS) |
| PREN 16770 : DRAFT 2014 | SAFETY OF WOODWORKING MACHINES - CHIP AND DUST EXTRACTION SYSTEMS FOR INDOOR INSTALLATION - SAFETY REQUIREMENTS |
| EN 12013:2018 | Plastics and rubber machines - Internal mixers - Safety requirements |
| EN 81-80:2003 | Safety rules for the construction and installation of lifts - Existing lifts - Part 80: Rules for the improvement of safety of existing passenger and goods passenger lifts |
| NF EN 1175-1 : 1998 + A1 2011 | SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL REQUIREMENTS - PART 1: GENERAL REQUIREMENTS FOR BATTERY POWERED TRUCKS |
| DIN EN 1374:2011-01 | Agricultural machinery - Silos stationary unloaders for round silos - Safety (includes Amendment A1:2010) |
| UNE-EN 14504:2017 | Inland navigation vessels - Floating landing stages and floating equipment on inland waters - Requirements, tests |
| EN 378-3:2016 | Refrigerating systems and heat pumps - Safety and environmental requirements - Part 3: Installation site and personal protection |
| BS EN 62026-2:2013 | Low-voltage switchgear and controlgear. Controller-device interfaces (CDIs) Actuator sensor interface (AS-i) |
| I.S. EN 1114-3:2001 | RUBBER AND PLASTICS MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS |
| DIN EN 1673:2010-10 | Food processing machinery - Rotary rack ovens - Safety and hygiene requirements (includes Amendment A1:2009) |
| DIN EN 12368:2015-09 | Traffic control equipment - Signal heads |
| EN 60335-1:2012/A13:2017 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED) |
| EN 60950-22:2017 | Information technology equipment - Safety - Part 22: Equipment to be installed outdoors |
| EN 61535:2009/A1:2013 | INSTALLATION COUPLERS INTENDED FOR PERMANENT CONNECTION IN FIXED INSTALLATIONS (IEC 61535:2009/A1:2012) |
| I.S. EN 676:2003 | AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS |
| DIN EN 13763-26:2004-11 | Explosives for civil uses - Detonators and relays - Part 26: Definitions, methods and requirements for devices and accessories for reliable and safe function of detonators and relays; German version EN 13763-26:2004 |
| DIN EN 12409:2011-12 | Plastics and rubber machines - Thermoforming machines - Safety requirements |
| DIN EN 609-1:2010-07 | AGRICULTURAL AND FORESTRY MACHINERY - SAFETY OF LOG SPLITTERS - PART 1: WEDGE SPLITTERS |
| DIN EN 13379:2016-06 (Draft) | PASTA PROCESSING PLANTS - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR, STICK MAGAZINE - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN 416-1:2009-09 | SINGLE BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATERS FOR NON-DOMESTIC USE - PART 1: SAFETY |
| DIN EN 1870-7:2013-01 | Safety of woodworking machines - Circular sawing machines - Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading |
| DIN EN 777-1:2009-09 | MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 1: SYSTEM D - SAFETY |
| DIN EN 1034-3:2012-02 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 3: Rereelers and winders |
| DIN EN 13288:2010-10 | Food processing machinery - Bowl lifting and tilting machines - Safety and hygiene requirements (includes Amendment A1:2009) |
| DIN EN 415-7:2009-12 | Safety of packaging machines - Part 7: Group and secondary packaging machines (includes Amendment A1:2008) |
| DIN EN 13378:2016-05 (Draft) | PASTA PROCESSING PLANTS - PASTA PRESSES - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN 415-5:2010-04 | Safety of packaging machines - Part 5: Wrapping machines (includes Amendment A1:2009) |
| DIN EN 13525:2010-05 | FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY |
| DIN EN 12158-1:2011-06 | Builders' hoists for goods - Part 1: Hoists with accessible platforms (includes Amendment A1:2010) |
| OVE/ONORM EN 50131-2-4 : 2008 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-4: REQUIREMENTS FOR COMBINED PASSIVE INFRARED AND MICROWAVE DETECTORS |
| DIN EN 13355:2010-06 | COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS |
| DIN EN 12899-2:2008-02 | Fixed, vertical road traffic signs - Part 2: Transilluminated traffic bollards (TTB) |
| DIN EN 12852:2011-02 | Food processing machinery - Food processors and blenders - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN 12978:2009-10 | INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY DEVICES FOR POWER OPERATED DOORS AND GATES - REQUIREMENTS AND TEST METHODS |
| DIN EN 1028-2:2008-06 | Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 2: Verification of general and safety requirements (includes Amendment A1:2008) |
| DIN EN 1870-12:2014-03 | Safety of woodworking machines - Circular sawing machines - Part 12: Pendulum cross-cut sawing machines |
| DIN EN 1495:2009-12 | Lifting platforms - Mast climbing work platforms (includes Amendment A2:2009) |
| DIN EN 1034-14:2010-07 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 14: Reel splitter (includes Amendment A1:2009) |
| DIN EN 1870-16:2013-01 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V CUTTING |
| DIN EN 13591:2010-10 | Food processing machinery - Fixed deck oven loaders - Safety and hygiene requirements (includes Amendment A1:2009) |
| DIN EN 26:2015-08 | Gas-fired instantaneous water heaters for the production of domestic hot water |
| DIN EN 12953-9:2007-09 | Shell boilers - Part 9: Requirements for limiting devices of the boiler and accessories |
| DIN EN 13675:2010-10 | Safety of machinery - Safety requirements for tube forming and rolling mills and their finishing line equipment (includes Amendment A1:2010) |
| DIN EN 1473:2016-10 | Installation and equipment for liquefied natural gas - Design of onshore installations |
| DIN EN 500-1:2010-05 | Mobile road construction machinery - Safety - Part 1: Common requirements (includes Amendment A1:2009) |
| DIN EN 12012-3:2010-02 | PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 3: SAFETY REQUIREMENTS FOR SHREDDERS |
| DIN EN 777-3:2009-09 | MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON DOMESTIC USE - PART 3: SYSTEM F - SAFETY |
| DIN EN 1760-3:2009-07 | SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES |
| DIN EN 1870-9:2013-01 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 9: DOUBLE BLADE CIRCULAR SAWING MACHINES FOR CROSS-CUTTING WITH INTEGRATED FEED AND WITH MANUAL LOADING AND/OR UNLOADING |
| DIN EN 777-2:2009-09 | MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 2: SYSTEM E - SAFETY |
| DIN EN 13418:2013-08 | PLASTICS AND RUBBER MACHINES - WINDING MACHINES FOR FILM OR SHEET - SAFETY REQUIREMENTS |
| DIN EN 13570:2011-02 | Food processing machinery - Mixing machines - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN 13389:2010-10 | Food processing machinery - Mixers with horizontal shafts - Safety and hygiene requirements (includes Amendment A1:2009) |
| DIN EN 1870-3:2015-02 | Safety of woodworking machines - Circular sawing machines - Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches |
| BS EN 1755:2015 | Industrial Trucks. Safety requirements and verification. Supplementary requirements for operation in potentially explosive atmospheres |
| BS EN 12966-1 : 2005 | ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS - PART 1: PRODUCT STANDARD |
| BS EN 14471 : 2013 | CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS |
| BS EN 15091:2013 | Sanitary tapware. Electronic opening and closing sanitary tapware |
| BS EN 14466 : 2005 | FIRE-FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS |
| I.S. EN 861:2007 | SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES |
| BS EN 12094-2:2003 | Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for non-electrical automatic control and delay devices |
| BS EN 13718-1:2014 | Medical vehicles and their equipment. Air ambulances Requirements for medical devices used in air ambulances |
| BS EN 12050-3:2015 | Wastewater lifting plants for buildings and sites Lifting plants for limited applications |
| BS EN 1493:2010 | Vehicle lifts |
| BS EN 61851-21:2002 | Electric vehicle conductive charging system Electric vehicle requirements for conductive connection to an a.c./d.c. supply |
| BS EN 61558-1 : 2005 | SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS |
| BS EN 81-72:2015 | Safety rules for the construction and installation of lifts. Particular applications for passenger and goods passenger lifts Firefighters lifts |
| BS EN 61535 : 2009 | INSTALLATION COUPLERS INTENDED FOR PERMANENT CONNECTION IN FIXED INSTALLATIONS |
| UNE-EN 525:2010 | Non-domestic direct gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW |
| UNE-EN 1870-4:2012 | Safety of woodworking machines - Circular sawing machines - Part 4: Multiblade rip sawing machines with manual loading and/or unloading |
| UNE-EN 12159:2013 | Builders hoists for persons and materials with vertically guided cages |
| UNE-EN 62271-212:2017 | High-voltage switchgear and controlgear - Part 212: Compact Equipment Assembly for Distribution Substation (CEADS) |
| BS EN 12855 : 2003 | FOOD PROCESSING MACHINERY - ROTATING BOWL CUTTERS - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 12414:1999 | Vehicle parking control equipment. Pay and display ticket machine. Technical and functional requirements |
| BS EN 12111:2014 | Tunnelling machines. Road headers and continuous miners. Safety requirements |
| UNE-EN 12645:2015 | Tyre pressure measuring instruments - Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles - Metrology, requirements and testing |
| 17/30338554 DC : 0 | BS EN 1175 - SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL/ELECTRONIC REQUIREMENTS |
| BS EN 12806:2003 | Automotive liquefied petroleum gas components. Other than containers |
| BS EN 1398:2009 | Dock levellers. Safety requirements |
| BS EN 12852 : 2001 | FOOD PROCESSING MACHINERY - FOOD PROCESSORS AND BLENDERS - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 13954 : 2005 | FOOD PROCESSING MACHINERY - BREAD SLICERS - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 62026-3:2015 | Low-voltage switchgear and controlgear. Controller-device interfaces (CDIs) DeviceNet |
| BS EN 1974 : 1998 | FOOD PROCESSING MACHINERY - SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 13128 : 2001 | SAFETY OF MACHINE TOOLS - MILLING MACHINES (INCLUDING BORING MACHINES) |
| BS EN 618 : 2002 | |
| BS EN 859 : 2007 | SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANING MACHINES |
| BS EN 12984 : 2005 | FOOD PROCESSING MACHINERY - PORTABLE AND/OR HAND-GUIDED MACHINES AND APPLIANCES WITH MECHANICALLY DRIVEN CUTTING TOOLS - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 1837 : 1999 | SAFETY OF MACHINERY - INTEGRAL LIGHTING OF MACHINES |
| BS EN 613:2001 | Independent gas-fired convection heaters |
| BS EN 953 : 1998 | SAFETY OF MACHINERY - GUARDS - GENERAL REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF FIXED AND MOVABLE GUARDS |
| BS EN 416-1:2009 | Single burner gas-fired overhead radiant tube heaters for non-domestic use Safety |
| 12/30235286 DC : DRAFT APR 2012 | BS EN 50153 - RAILWAY APPLICATIONS - ROLLING STOCK - PROTECTIVE PROVISIONS RELATING TO ELECTRICAL HAZARDS |
| UNE-EN 1870-7:2013 | Safety of woodworking machines - Circular sawing machines - Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading |
| BS EN 50174-2 : 2009 | INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 2: INSTALLATION PLANNING AND PRACTICES INSIDE BUILDINGS |
| BS EN 12157:1999 | Rotodynamic pumps. Coolant pump units for machine tools. Nominal flow rate, dimensions |
| BS EN 12645:2014 | Tyre pressure measuring instruments. Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles. Metrology, requirements and testing |
| UNE-EN 61812-1:2012 | Time relays for industrial and residential use - Part 1: Requirements and tests |
| BS EN 14438:2006 | Gas-fired insets for heating more than one room |
| UNE-EN 14989-2:2011 | Chimneys - Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications - Part 2: Flue and air supply ducts for room sealed appliances |
| BS EN 61347-1:2015 | Lamp controlgear General and safety requirements |
| UNE-EN 609-1:2017 | Agricultural and forestry machinery - Safety of log splitters - Part 1: Wedge splitters |
| BS EN 13418:2013 | Plastics and rubber machines. Winding machines for film or sheet. Safety requirements |
| UNE-EN 14595:2016 | Tanks for transport of dangerous goods - Service equipment - Breather device |
| UNE-EN 61140:2017 | Protection against electric shock - Common aspects for installation and equipment |
| BS EN 15433-6:2007 | Transportation loads. Measurement and evaluation of dynamic mechanical loads Automatic recording systems for measuring randomly occurring shock during monitoring of transports |
| BS EN 1374 : 2000 | AGRICULTURAL MACHINERY - SILOS STATIONARY UNLOADERS FOR ROUND SILOS - SAFETY |
| BS EN 1870-9:2012 | Safety of woodworking machines. Circular sawing machines Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading |
| BS EN 954-1:1997 | Safety of machinery. Safety related parts of control systems General principles for design |
| BS EN 12921-2 : 2005 | MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 2: SAFETY OF MACHINES USING WATER BASED CLEANING LIQUIDS |
| BS EN 50522:2010 | Earthing of power installations exceeding 1 kV a.c. |
| BS EN 14044:2014 | High rise aerial appliances for fire and rescue service use. Turntable ladders with sequential movements. Safety and performance requirements and test methods |
| BS EN 13763-26:2004 | Explosives for civil uses. Detonators and relays Definitions, methods and requirements for devices and accessories for reliable and safe functioning of detonators and relays |
| BS EN 50155:2017 | Railway applications. Rolling stock. Electronic equipment |
| BS EN 1870-15:2012 | Safety of woodworking machines. Circular sawing machines Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading |
| BS EN 454:2014 | Food processing machinery. Planetary mixers. Safety and hygiene requirements |
| BS EN 12050-2:2015 | Wastewater lifting plants for buildings and sites Lifting plants for faecal-free wastewater |
| UNE-EN 62870:2016 | Electrical installations for lighting and beaconing of aerodromes - Safety secondary circuits in series circuits - General safety requirements |
| BS EN 12622 : 2009 | SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES |
| BS EN 14797:2006 | Explosion venting devices |
| BS EN 12629-7 : 2004 | MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 7: STATIONARY AND MOBILE EQUIPMENT FOR LONG LINE MANUFACTURE OF PRESTRESSED PRODUCTS |
| DIN EN 15091:2014-03 | SANITARY TAPWARE - ELECTRONIC OPENING AND CLOSING SANITARY TAPWARE |
| BS EN 62477-1 : 2012 | SAFETY REQUIREMENTS FOR POWER ELECTRONIC CONVERTER SYSTEMS AND EQUIPMENT - PART 1: GENERAL (IEC 62477-1:2012) |
| UNE-EN 15684:2015 | Building hardware - Mechatronic cylinders - Requirements and test methods |
| BS EN 12416-1:2001 | Fixed firefighting systems. Powder systems Requirements and test methods for components |
| BS EN 1028-2 : 2002 | FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITH PRIMER - PART 2: VERIFICATION OF GENERAL AND SAFETY REQUIREMENTS |
| BS EN 13886 : 2005 | FOOD PROCESSING MACHINERY - COOKING KETTLES EQUIPPED WITH POWERED STIRRER AND/OR MIXER - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 12409 : 2008 | PLASTICS AND RUBBER MACHINES - THERMOFORMING MACHINES - SAFETY REQUIREMENTS |
| BS EN 419-1:2009 | Non-domestic gas-fired overhead luminous radiant heaters Safety |
| BS EN 1035:1999 | Tannery machines. Moving platen machinery. Safety requirements |
| BS EN 13842:2004 | Oil fired forced convection air heaters. Stationary and transportable for space heating |
| BS EN 13616:2004 | Overfill prevention devices for static tanks for liquid petroleum fuels |
| BS EN 1458-1:2011 | Domestic direct gas-fired tumble dryers of types B22D and B23D, of nominal heat input not exceeding 6 kW Safety |
| BS EN 12110:2014 | Tunnelling machines. Air locks. Safety requirements |
| BS EN 1034-1 : 2000 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 1 - COMMON REQUIREMENTS |
| 16/30282633 DC : 0 | BS EN 50155 - RAILWAY APPLICATIONS - ELECTRONIC EQUIPMENT USED ON ROLLING STOCK |
| BS EN 13463-3:2005 | Non-electrical equipment for use in potentially explosive atmospheres Protection by flameproof enclosure \'d\' |
| BS EN 13378 : 2001 | PASTA PROCESSING PLANTS - PASTA PRESSES - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 1870-10:2013 | Safety of woodworking machines. Circular sawing machines Single blade automatic and semi-automatic up-cutting cross-cut sawing machines |
| BS EN 12418 : 2000 | MASONRY AND STONE CUTTING-OFF MACHINES FOR JOB SITE - SAFETY |
| BS EN 15067:2007 | Plastics and rubber machines. Film converting machines for bags and sacks. Safety requirements |
| BS EN 12853 : 2001 | FOOD PROCESSING MACHINERY - HAND-HELD BLENDERS AND WHISKS - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 12159:2012 | Builders hoists for persons and materials with vertically guided cages |
| BS EN 415-6:2013 | Safety of packaging machines Pallet wrapping machines |
| BS EN 1673 : 2000 | FOOD PROCESSING MACHINERY - ROTARY RACK OVENS - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 12244-1:1998 | Direct gas-fired washing machines, of nominal heat input not exceeding 20 kW Safety |
| BS EN 62040-1-2:2003 | Uninterruptible power systems (UPS) General and safety requirements for UPS used in restricted access locations |
| BS EN 1678 : 1998 | FOOD PROCESSING MACHINERY - VEGETABLE CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| EN 1974:1998+A1:2009 | Food processing machinery - Slicing machines - Safety and hygiene requirements |
| DIN EN 12601:2011-07 | RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN GENERATING SETS - SAFETY |
| UNI EN 1218-5 : 2010 | SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 5: ONE SIDE PROFILING MACHINES WITH FIXED TABLE AND FEED ROLLERS OR FEED CHAIN |
| I.S. EN 12629-4:2001 | MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 4: CONCRETE ROOF TILE MAKING MACHINES |
| EN 61347-1:2015 | Lamp controlgear - Part 1: General and safety requirements |
| EN 12463:2014 | Food processing machinery - Filling machines and auxiliary machines - Safety and hygiene requirements |
| I.S. EN 14010:2004 | |
| I.S. EN 1870-16:2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V-CUTTING |
| I.S. EN 14043:2014 | HIGH RISE AERIAL APPLIANCES FOR FIRE AND RESCUE SERVICE USE - TURNTABLE LADDERS WITH COMBINED MOVEMENTS - SAFETY AND PERFORMANCE REQUIREMENTS AND TEST METHODS |
| I.S. EN 13570:2005 | FOOD PROCESSING MACHINERY - MIXING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 13289:2001 | PASTA PROCESSING PLANTS - DRYERS AND COOLERS - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 15746-2 : 2011 | RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| I.S. EN 454:2014 | FOOD PROCESSING MACHINERY - PLANETARY MIXERS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 1501-2:2005 | REFUSE COLLECTION VEHICLES AND ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 2: SIDE LOADED REFUSE COLLECTION VEHICLES |
| EN 61800-5-1:2007/A1:2017 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 5-1: SAFETY REQUIREMENTS - ELECTRICAL, THERMAL AND ENERGY (IEC 61800-5-1:2007/A1:2016) |
| CEI EN 61800-1 : 2000 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 1: GENERAL REQUIREMENTS - RATING SPECIFICATIONS FOR LOW VOLTAGE ADJUSTABLE SPEED D.C. POWER DRIVE SYSTEMS |
| DIN EN 1570:1998-08 | SAFETY REQUIREMENTS FOR LIFTING TABLES |
| EN 50178:1997 | Electronic equipment for use in power installations |
| EN 12753:2005+A1:2010 | Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety requirements |
| EN 60079-26:2015 | Explosive atmospheres - Part 26: Equipment with Equipment Protection Level (EPL) Ga |
| EN 15609:2012 | LPG equipment and accessories - LPG propulsion systems for boats, yachts and other craft |
| EN 175301-801:2006 | Detail Specification: High density rectangular connectors, round removable crimp contacts |
| EN 60269-1:2007/A2:2014 | LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS (IEC 60269-1:2006/A2:2014) |
| EN 50091-1-1:1996/corrigendum Aug. 2004 | |
| UNI EN 12158-1 : 2010 | BUILDERS' HOISTS FOR GOODS - PART 1: HOISTS WITH ACCESSIBLE PLATFORMS |
| EN 12405-2:2012 | Gas meters - Conversion devices - Part 2: Energy conversion |
| EN 12669:2000 | Direct gas-fired hot air blowers for use in greenhouses and supplementary non-domestic space heating |
| DIN EN 15033:2007-02 | Room sealed storage water heaters for the production of sanitary hot water using LPG for vehicles and boats |
| EN 50216-2 : 2002 AMD 1 2002 | POWER TRANSFORMER AND REACTOR FITTINGS - PART 2: GAS AND OIL ACTUATED RELAY FOR LIQUID IMMERSED TRANSFORMERS AND REACTORS WITH CONSERVATOR |
| DIN EN 13842:2004-10 | Oil fired forced convection air heaters - Stationary and transportable for space heating |
| EN 1010-2:2006+A1:2010 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 2: Printing and varnishing machines including pre-press machinery |
| EN 60728-4:2008 | Cable networks for television signals, sound signals and interactive services - Part 4: Passive wideband equipment for coaxial cable networks |
| EN 50411-3-5:2015 | Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 3-5: Wall outlet |
| EN 13418:2013 | Plastics and rubber machines - Winding machines for film or sheet - Safety requirements |
| DIN EN 15067:2008-03 | Plastics and rubber machines - Film converting machines for bags and sacks - Safety requirements |
| DIN EN 230:2005-10 | AUTOMATIC BURNER CONTROL SYSTEMS FOR OIL BURNERS |
| EN 60974-8:2009 | Arc welding equipment - Part 8: Gas consoles for welding and plasma cutting systems |
| EN 12098-4:2005 | Controls for heating systems - Part 4: Optimum start-stop control equipment for electrical systems |
| EN 50502:2015 | Railway applications - Rolling stock - Electric equipment in trolley buses - Safety requirements and current collection systems |
| EN 1114-1:2011 | Plastics and rubber machines - Extruders and extrusion lines - Part 1: Safety requirements for extruders |
| EN 12418:2000+A1:2009 | Masonry and stone cutting-off machines for job site - Safety |
| EN 50087 : 1993 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PARTICULAR REQUIREMENTS FOR BULK MILK COOLERS |
| EN 60335-2-99:2003 | Household and similar electrical appliances - Safety - Part 2-99: Particular requirements for commercial electric hoods |
| EN 62618:2016 | Radiation protection instrumentation - Spectroscopy-based alarming Personal Radiation Detectors (SPRD) for the detection of illicit trafficking of radioactive material |
| EN 12259-5:2002 | Fixed firefighting systems - Components for sprinkler and water spray systems - Part 5: Water flow detectors |
| EN 61243-3:2014/AC:2015 | LIVE WORKING - VOLTAGE DETECTORS - PART 3: TWO-POLE LOW-VOLTAGE TYPE |
| EN 50274 : 2002 COR 2009 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PROTECTION AGAINST ELECTRIC SHOCK - PROTECTION AGAINST UNINTENTIONAL DIRECT CONTACT WITH HAZARDOUS LIVE PARTS |
| EN 61058-1:2002/A2:2008 | SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS |
| EN 61076-7-100 : 2006 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 7-100: CABLE OUTLET ACCESSORIES - DETAIL SPECIFICATION FOR A METRIC CABLE SEALING CONSISTING OF AN INTEGRATED PART OF HEAVY-DUTY RECTANGULAR OR CIRCULAR CONNECTOR HOODS AND A SEALING SYSTEM |
| EN 12067-2:2004 | Gas/air ratio controls for gas burners and gas burning appliances - Part 2: Electronic types |
| EN 62444:2013 | CABLE GLANDS FOR ELECTRICAL INSTALLATIONS (IEC 62444:2010, MODIFIED) |
| EN 1501-5:2011 | Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting devices for refuse collection vehicles |
| DIN EN 15597-1:2010-02 | WINTER MAINTENANCE EQUIPMENT - SPREADING MACHINES (GRITTING MACHINES) - PART 1: GENERAL REQUIREMENTS AND DEFINITIONS FOR SPREADING MACHINES |
| EN 50365:2002 | Electrically insulating helmets for use on low voltage installations |
| EN 62013-1:2006 | Caplights for use in mines susceptible to firedamp - Part 1: General requirements - Construction and testing in relation to the risk of explosion |
| EN 50380:2017 | Marking and documentation requirements for Photovoltaic Modules |
| EN 62282-3-1 : 2007 | FUEL CELL TECHNOLOGIES - PART 3-1: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY |
| EN 12352:2006 | Traffic control equipment - Warning and safety light devices |
| CLC/TS 50131-3:2003 | Alarm systems - Intrusion systems - Part 3: Control and indicating equipment |
| EN 61754-24-21 : 2009 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 24-21: TYPE SC-RJ CONNECTORS WITH PROTECTIVE HOUSINGS BASED ON IEC 61076-3-106, VARIANT 06 |
| EN 61076-3-114 : 2009 | Connectors for electronic equipment - Product requirements - Part 3-114: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 11 related to IEC 61076-3-106 - Bayonet coupling type |
| EN 60335-2-39:2003/A2:2008 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-39: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC MULTI-PURPOSE COOKING PANS |
| EN 13278:2013 | Open fronted gas-fired independent space heaters |
| EN 50216-1:2002 | Power transformer and reactor fittings - Part 1: General |
| EN 60728-14:2014 | Cable networks for television signals, sound signals and interactive services - Part 14: Optical transmission systems using RFoG technology |
| EN 61400-2:2014 | Wind turbines - Part 2: Small wind turbines |
| EN 61241-14:2004 | Electrical apparatus for use in the presence of combustible dust - Part 14: Selection and installation |
| EN 13379:2001+A1:2013 | Pasta processing plants - Spreader, stripping and cutting machine, stick return conveyor, stick magazine - Safety and hygiene requirements |
| CEN/TS 16819:2015 | Postal services - Parcel boxes for end use - Technical features |
| EN 50379-3:2012 | Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances - Part 3: Performance requirements for apparatus used in non-statutory servicing of gas fired heating appliances |
| EN 62208:2011 | Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements |
| EN 61158-2:2014 | Industrial communication networks - Fieldbus specifications - Part 2: Physical layer specification and service definition |
| EN 61587-4:2012 | Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 4: Combination of performance levels for modular cabinets |
| EN 61184:2017 | Bayonet lampholders |
| EN 50379-1:2012 | Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances - Part 1: General requirements and test methods |
| EN 60694:1996/A2:2001 | COMMON SPECIFICATIONS FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDS |
| EN 62080:2009/A2:2015 | SOUND SIGNALLING DEVICES FOR HOUSEHOLD AND SIMILAR PURPOSES (IEC 62080:2001/A2:2015) |
| UNE-EN 972:1999 | TANNERY MACHINES. RECIPROCATING ROLLER MACHINES. SAFETY REQUIREMENTS. |
| EN 12044:2005+A1:2009 | Footwear, leather and imitation leather goods manufacturing machines - Cutting and punching machines - Safety requirements |
| DIN VDE 0641-11 : 1992 | CIRCUIT-BREAKERS FOR OVER CURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR INSTALLATIONS |
| HD 384.7.708 : 2005 | ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 7: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - SECTION 708: ELECTRICAL INSTALLATIONS IN CARAVAN PARKS |
| EN 61558-1:2005/A1:2009 | SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS |
| DIN EN 12312-5:2009-08 | Aircraft ground support equipment - Specific requirements - Part 5: Aircraft fuelling equipment (includes Amendment A1:2009) |
| HD 60364-5-51:2009/A12:2017 | ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 5-51: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - COMMON RULES |
| EN 60968:2015 | Self-ballasted fluorescent lamps for general lighting services - Safety requirements |
| DIN EN 14543:2017-10 | SPECIFICATION FOR DEDICATED LIQUEFIED PETROLEUM GAS APPLIANCES - PARASOL PATIO HEATERS - FLUELESS RADIANT HEATERS FOR OUTDOOR OR AMPLY VENTILATED AREA USE |
| EN 1010-5:2005 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 5: Machines for the production of corrugated board and machines for the conversion of flat and corrugated board |
| EN 50130-5:2011 | ALARM SYSTEMS - PART 5: ENVIRONMENTAL TEST METHODS |
| EN 12355:2003+A1:2010 | Food processing machinery - Derinding-, skinning- and membrane removal machines - Safety and hygiene requirements |
| EN 61241-1:2004/corrigendum Dec. 2006 | ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 1: PROTECTION BY ENCLOSURES "TD" |
| EN 1010-1:2004+A1:2010 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements |
| EN 62282-2:2012 | Fuel cell technologies - Part 2: Fuel cell modules |
| CEN/TS 81-83:2009 | Safety rules for the construction and installation of lifts - Existing lifts - Part 83: Rules for the improvement of the resistance against vandalism |
| EN 12921-2:2005+A1:2008 | Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 2: Safety of machines using water based cleaning liquids |
| EN 50369:2005 | Liquid tight sheathing systems for cable management |
| EN 12547:2014 | Centrifuges - Common safety requirements |
| EN 12050-1:2015 | Wastewater lifting plants for buildings and sites - Part 1: Lifting plants for wastewater containing faecal matter |
| EN 50176:2009 | Stationary electrostatic application equipment for ignitable liquid coating material - Safety requirements |
| EN 16191:2014 | Tunnelling machinery - Safety requirements |
| DIN EN 1114-3:2010-01 | PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS |
| EN 12416-1:2001+A2:2007 | Fixed firefighting systems - Powder systems - Part 1: Requirements and test methods for components |
| EN 13112:2002+A1:2009 | Tannery machines - Splitting and bandknife shearing machines - Safety requirements |
| EN 62271-109:2009/A1:2013 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 109: ALTERNATING-CURRENT SERIES CAPACITOR BY-PASS SWITCHES (IEC 62271-109:2008/A1:2013) |
| EN 13237:2012 | Potentially explosive atmospheres - Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres |
| EN 12182:2012 | Assistive products for persons with disability - General requirements and test methods |
| EN 12263:1998 | Refrigerating systems and heat pumps - Safety switching devices for limiting the pressure - Requirements and tests |
| EN 60255-27:2014 | Measuring relays and protection equipment - Part 27: Product safety requirements |
| EN 50177:2009/A1:2012 | STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE COATING POWDERS - SAFETY REQUIREMENTS |
| CEN/TS 15213-6:2011 | Road transport and traffic telematics - After-theft services for the recovery of stolen vehicles - Part 6: Test procedures |
| EN 12151:2007 | Machinery and plants for the preparation of concrete and mortar - Safety requirements |
| EN 61076-3-116 : 2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-116: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR PROTECTIVE HOUSINGS FOR USE WITH 8-WAY SHIELDED AND UNSHIELDED CONNECTORS FOR FREQUENCIES UP TO 600 MHZ FOR INDUSTRIAL ENVIRONMENTS INCORPORATING THE IEC 60603-7 SERIES INTERFACE - VARIANT 13 RELATED TO IEC 61076-3-106 - LOCKING LEVER |
| EN 12852:2001+A1:2010 | Food processing machinery - Food processors and blenders - Safety and hygiene requirements |
| EN 50539-11 : 2013 AMD 1 2014 | LOW-VOLTAGE SURGE PROTECTIVE DEVICES - SURGE PROTECTIVE DEVICES FOR SPECIFIC APPLICATION INCLUDING D.C. - PART 11: REQUIREMENTS AND TESTS FOR SPDS IN PHOTOVOLTAIC APPLICATIONS |
| EN 60730-1:2016 | Automatic electrical controls - Part 1: General requirements |
| CEN/TR 16251:2016 | Railway applications - Environmental conditions - Design guidance for rolling stock |
| EN 60076-11:2004 | Power transformers - Part 11: Dry-type transformers |
| EN 50125-3 : 2003 COR 2010 | RAILWAY APPLICATIONS - ENVIRONMENTAL CONDITIONS FOR EQUIPMENT - PART 3: EQUIPMENT FOR SIGNALLING AND TELECOMMUNICATIONS |
| EN 60204-11:2000/corrigendum:2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 11: REQUIREMENTS FOR HV EQUIPMENT FOR VOLTAGES ABOVE 1000 V A.C. OR 1500 V D.C. AND NOT EXCEEDING 36 KV |
| CEN/TS 45545-4:2009 | Railway applications - Fire protection on railway vehicles - Part 4: Fire safety requirements for railway rolling stock design |
| EN 12043:2014 | Food processing machinery - Intermediate provers - Safety and hygiene requirements |
| DIN EN 1114-2:2010-01 | PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 2: SAFETY REQUIREMENTS FOR DIE FACE PELLETISERS |
| EN 12899-1:2007 | Fixed, vertical road traffic signs - Part 1: Fixed signs |
| EN 1501-1:2011+A1:2015 | Refuse collection vehicles - General requirements and safety requirements - Part 1: Rear loaded refuse collection vehicles |
| EN 50191:2010 | ERECTION AND OPERATION OF ELECTRICAL TEST EQUIPMENT |
| EN 50021 : 99 COR 2000 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - TYPE OF PROTECTION "N" |
| EN 13208:2003+A1:2010 | Food processing machinery - Vegetable peelers - Safety and hygiene requirements |
| EN 12601:2010 | Reciprocating internal combustion engine driven generating sets - Safety |
| EN 1218-3:2001+A1:2009 | Safety of woodworking machines - Tenoning machines - Part 3: Hand fed tenoning machines with sliding table for cutting structural timbers |
| DIN EN 982:2009-06 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - HYDRAULICS |
| (INVALID RECORD) EN 50543:2011/AC:2011 | ELECTRONIC PORTABLE AND TRANSPORTABLE APPARATUS DESIGNED TO DETECT AND MEASURE CARBON DIOXIDE AND/OR CARBON MONOXIDE IN INDOOR AMBIENT AIR - REQUIREMENTS AND TEST METHODS |
| EN 12368:2015 | Traffic control equipment - Signal heads |
| EN 50085-1 : 2005 AMD 1 2013 | CABLE TRUNKING SYSTEMS AND CABLE DUCTING SYSTEMS FOR ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS |
| EN 62271-201:2014 | High-voltage switchgear and controlgear - Part 201: AC solid-insulation enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV |
| EN 12157:1999 | Rotodynamic pumps - Coolant pumps units for machine tools - Nominal flow rate, dimensions |
| EN 50286:1999/corrigendum:2004 | ELECTRICAL INSULATING PROTECTIVE CLOTHING FOR LOW-VOLTAGE INSTALLATIONS |
| EN 12405 : 2002 | GAS METERS - GAS-VOLUME ELECTRONIC CONVERSION DEVICES |
| EN 12336:2005+A1:2008 | Tunnelling machines - Shield machines, thrust boring machines, auger boring machines, lining erection equipment - Safety requirements |
| EN 1028-2:2002+A1:2008 | Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 2: Verification of general and safety requirements |
| EN 12899-2:2007 | Fixed, vertical road traffic signs - Part 2: Transilluminated traffic bollards (TTB) |
| EN 60998-2-1:2004 | Connecting devices for low-voltage circuits for household and similar purposes - Part 2-1: Particular requirements for connecting devices as separate entities with screw-type clamping units |
| EN 12050-3:2015 | Wastewater lifting plants for buildings and sites - Part 3: Lifting plants for limited applications |
| EN 62484:2015 | Radiation protection instrumentation - Spectroscopy-based portal monitors used for the detection and identification of illicit trafficking of radioactive material |
| EN 12779:2015 | Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements |
| EN 61754-27 : 2013 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 27: TYPE M12-FO CONNECTOR FAMILY (IEC 61754-27:2013) |
| EN 13463-3:2005 | Non-electrical equipment for use in potentially explosive atmospheres - Part 3: Protection by flameproof enclosure 'd' |
| EN 12325-1:1998 | Irrigation techniques - Centre pivot and moving lateral systems - Part 1: Presentation of the technical characteristics |
| EN 13534:2006+A1:2010 | Food processing machinery - Curing injection machines - Safety and hygiene requirements |
| EN 50541-1:2011 | Three phase dry-type distribution transformers 50 Hz, from 100 kVA to 3 150 kVA, with highest voltage for equipment not exceeding 36 kV - Part 1: General requirements |
| EN 1175-1:1998+A1:2010 | Safety of industrial trucks - Electrical requirements - Part 1: General requirements for battery powered trucks |
| EN 12717:2001+A1:2009 | Safety of machine tools - Drilling machines |
| EN 60335-2-84:2003/A1:2008 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-84: PARTICULAR REQUIREMENTS FOR TOILETS |
| EN 62271-212:2017 | High-voltage switchgear and controlgear - Part 212: Compact Equipment Assembly for Distribution Substation (CEADS) |
| EN 50411-3-8:2016 | Fibre organizers and closures to be used in optical fibre communication systems - Product specifications - Part 3-8: Fibre management system, terminal equipment box type 1 for category C |
| EN 61076-2-106:2011 | Connectors for electronic equipment - Product requirements - Part 2-106: Circular connectors - Detail specification for connectors M 16 x 0,75 with screw-locking and degree of protection IP40 or IP65/67 |
| EN 12806:2003 | Automotive liquefied petroleum gas components - Other than containers |
| EN 12621:2006+A1:2010 | Machinery for the supply and circulation of coating materials under pressure - Safety requirements |
| EN 50065-4-2 : 2001 AMD 2 2005 | SIGNALLING ON LOW VOLTAGE ELECTRICAL INSTALLATIONS IN THE FREQUENCY RANGE 3 KHZ TO 148,5 KHZ - PART 4-2: LOW VOLTAGE DECOUPLING FILTERS - SAFETY REQUIREMENTS |
| EN 13378:2001+A1:2013 | Pasta processing plants - Pasta presses - Safety and hygiene requirements |
| EN 12267:2003+A1:2010 | Food processing machinery - Circular saw machines - Safety and hygiene requirements |
| NF EN 201 : 2009 | PLASTICS AND RUBBER MACHINES - INJECTION MOULDING MACHINES - SAFETY REQUIREMENTS |
| EN 12952-11:2007 | Water-tube boilers and auxiliary installations - Part 11: Requirements for limiting devices of the boiler and accessories |
| EN 13114:2002+A1:2009 | Tannery machines - Rotating process vessels - Safety requirements |
| EN 1248:2001+A1:2009 | Foundry machinery - Safety requirements for abrasive blasting equipment |
| EN 61131-2:2007 | Programmable controllers - Part 2: Equipment requirements and tests |
| EN 61851-1:2011 | Electric vehicle conductive charging system - Part 1: General requirements |
| EN 12409:2008+A1:2011 | Plastics and rubber machines - Thermoforming machines - Safety requirements |
| EN 62586-1:2017 | Power quality measurement in power supply systems - Part 1: Power quality instruments (PQI) |
| EN 50516-2-1:2011 | INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-1: TYPE ODVA PC INDUSTRIAL TERMINATED ON EN 60793-2-10 CATEGORY A1A AND A1B MULTIMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY 1 (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN EN 50173-1 AND IEC 61753-1-3 |
| EN 50381 : 2004 COR 2005 | TRANSPORTABLE VENTILATED ROOMS WITH OR WITHOUT AN INTERNAL SOURCE OF RELEASE |
| EN 12645:2014 | Tyre pressure measuring instruments - Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles - Metrology, requirements and testing |
| EN 60335-2-38:2003/A1:2008 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-38: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC GRIDDLES AND GRIDDLE GRILLS |
| EN 12178:2016 | Refrigerating systems and heat pumps - Liquid level indicating devices - Requirements, testing and marking |
| EN 1807-1:2013 | Safety of woodworking machines - Band sawing machines - Part 1: Table band saws and band re-saws |
| EN 62271-103:2011 | High-voltage switchgear and controlgear - Part 103: Switches for rated voltages above 1 kV up to and including 52 kV |
| EN 12268:2014 | Food processing machinery - Band saw machines - Safety and hygiene requirements |
| EN IEC 62485-2:2018 | Safety requirements for secondary batteries and battery installations - Part 2: Stationary batteries |
| EN 12041:2014 | Food processing machinery - Moulders - Safety and hygiene requirements |
| EN 61050:1992/A1:1995 | TRANSFORMERS FOR TUBULAR DISCHARGE LAMPS HAVING A NON LOAD OUTPUT VOLTAGE EXCEEDING 1000 V (GENERALLY CALLED NEON TRANSFORMERS - GENERAL AND SAFETY REQUIREMENTS |
| UNI EN 12463 : 2014 | FOOD PROCESSING MACHINERY - FILLING MACHINES AND AUXILIARY MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| EN 62676-1-1:2014/AC:2014 | VIDEO SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 1-1: SYSTEM REQUIREMENTS - GENERAL (IEC 62676-1-1:2013) |
| EN 50131-10:2014 | Alarm systems - Intrusion and hold-up systems - Part 10: Application specific requirements for Supervised Premises Transceiver (SPT) |
| EN 60297-3-109 : 2016 | MECHANICAL STRUCTURES FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - DIMENSIONS OF MECHANICAL STRUCTURES OF THE 482,6 MM (19 IN) SERIES - PART 3-109: DIMENSIONS OF CHASSIS FOR EMBEDDED COMPUTING DEVICES |
| EN 61822:2009 | ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - CONSTANT CURRENT REGULATORS |
| EN 62271-202:2014/AC:2014 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 202: HIGH-VOLTAGE/LOW-VOLTAGE PREFABRICATED SUBSTATION (IEC 62271-202:2014) |
| EN 60838-2-1:1996/A2:2004 | MISCELLANEOUS LAMPHOLDERS - PART 2: PARTICULAR REQUIREMENTS - SECTION 1: LAMPHOLDERS S14 (IEC 60838-2-1:1994/A2:2004) |
| EN 62327:2011 | RADIATION PROTECTION INSTRUMENTATION - HAND-HELD INSTRUMENTS FOR THE DETECTION AND IDENTIFICATION OF RADIONUCLIDES AND FOR THE INDICATION OF AMBIENT DOSE EQUIVALENT RATE FROM PHOTON RADIATION |
| EN 61076-2-104:2014 | Connectors for electronic equipment - Product requirements - Part 2-104: Circular connectors - Detail specification for circular connectors with M8 screw-locking or snap-locking |
| EN 50206-2:2010 | Railway applications - Rolling stock - Pantographs: Characteristics and tests - Part 2: Pantographs for metros and light rail vehicles |
| EN 50131-2-8:2016 | Alarm systems - Intrusion and hold-up systems - Part 2-8: Intrusion detectors - Shock detectors |
| EN 61514-2:2013 | INDUSTRIAL PROCESS CONTROL SYSTEMS - PART 2: METHODS OF EVALUATING THE PERFORMANCE OF INTELLIGENT VALVE POSITIONERS WITH PNEUMATIC OUTPUTS MOUNTED ON AN ACTUATOR VALVE ASSEMBLY (IEC 61514-2:2013) |
| EN 60335-2-12 : 2003 AMD 1 2008 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-12: PARTICULAR REQUIREMENTS FOR WARMING PLATES AND SIMILAR APPLIANCES |
| EN 50483-4:2009 | Test requirements for low voltage aerial bundled cable accessories - Part 4: Connectors |
| EN 50464-2-3:2007 | Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2 500 kVA with highest voltage for equipment not exceeding 36 kV - Part 2-3: Distribution transformers with cable boxes on the high-voltage and/or low-voltage side - Cable boxes type 2 for use on distribution transformers meeting the requirements of EN 50464-2-1 |
| EN 62683:2015 | Low-voltage switchgear and controlgear - Product data and properties for information exchange |
| CEN/TS 16134:2011 | Chimney terminals - General requirements and material independent test methods |
| EN 60077-3:2002 | Railway applications - Electric equipment for rolling stock - Part 3: Electrotechnical components - Rules for d.c. circuit-breakers |
| EN 62718:2016 | Railway applications - Rolling stock - DC supplied electronic ballasts for lighting fluorescent lamps |
| EN 62040-1-2:2003/corrigendum:2004 | |
| HD 60364-7-702:2010 | Low-voltage electrical installations - Part 7-702: Requirements for special installations or locations - Swimming pools and fountains |
| EN 50291:2001 | Electrical apparatus for the detection of carbon monoxide in domestic premises - Test methods and performance requirements |
| EN 13352:2012 | Specification for the performance of automatic tank contents gauges |
| NF EN 1218-1 : 2000 + A1 2009 | SAFETY OF WOOD WORKING MACHINES - TENONING MACHINES - PART 1: SINGLE END TENONING MACHINES WITH SLIDING TABLE |
| EN 60945:2002 | Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results |
| EN 13244-3:2002 | Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 3: Fittings |
| EN 12244-1:1998 | Direct gas-fired washing machines, of nominal heat input not exceeding 20 kW - Part 1: Safety |
| EN 12514-2:2000 | Installations for oil supply systems for oil burners - Part 2: Safety requirements and tests - Parts, valves, pipes, filters, oil de-aerators, meters |
| EN 1114-2:1998+A1:2008 | Plastics and rubber machines - Extruders and extrusion lines - Part 2: Safety requirements for die face pelletisers |
| EN 13113:2002+A1:2010 | Tannery machines - Roller coating machines - Safety requirements |
| EN 12478:2000/AC:2001 | SAFETY OF MACHINE TOOLS - LARGE NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES |
| EN 1319:2009 | Domestic gas-fired forced convection air heaters for space heating, with fan-assisted burners not exceeding a net heat input of 70 kW |
| EN 12693:2008 | Refrigerating systems and heat pumps - Safety and environmental requirements - Positive displacement refrigerant compressors |
| EN 50078:1993 | Torches and guns for arc welding |
| EN 12757-1:2005+A1:2010 | Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing |
| EN 12215:2004+A1:2009 | Coating plants - Spray booths for application of organic liquid coating materials - Safety requirements |
| EN 50411-2-9:2010 | Fibre organisers and closures to be used in optical fibre communications systems - Product specifications - Part 2-9: Non-sealed closures for air blown fibre microduct cable, for category S & A |
| UNI EN 415-3 : 2010 | SAFETY OF PACKAGING MACHINES - PART 3: FORM, FILL AND SEAL MACHINES |
| EN 12050-2:2015 | Wastewater lifting plants for buildings and sites - Part 2: Lifting plants for faecal-free wastewater |
| EN 12979:2002 | Automotive LPG-systems - Installation requirements |
| EN 13289:2001+A1:2013 | Pasta processing plants - Dryers and coolers - Safety and hygiene requirements |
| EN 13355:2004+A1:2009 | Coating plants - Combined booths - Safety requirements |
| EN 13463-8:2003 | Non-electrical equipment for potentially explosive atmospheres - Part 8: Protection by liquid immersion 'k' |
| EN 60320-2-3:1998/A1:2005 | APPLIANCE COUPLER FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES - PART 2-3: APPLIANCE COUPLER WITH A DEGREE OF PROTECTION HIGHER THAN IPX0 |
| EN 50172:2004 | Emergency escape lighting systems |
| EN 12622:2009+A1:2013 | Safety of machine tools - Hydraulic press brakes |
| EN 12514-1:2000 | Installations for oil supply systems for oil burners - Part 1: Safety requirements and tests - Parts, oil feed pumps, control and safety devices, supply tanks |
| EN 1218-4:2004+A2:2009 | Safety of woodworking machines - Tenoning machines - Part 4: Edge banding machines fed by chain(s) |
| EN 12966-1:2005+A1:2009 | Road vertical signs - Variable message traffic signs - Part 1: Product standard |
| EN 12854:2003+A1:2010 | Food processing machinery - Beam mixers - Safety and hygiene requirements |
| EN 13035-9:2006+A1:2010 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 9: Washing installations |
| EN 12505:2000+A1:2009 | Food processing machinery - Centrifugal machines for processing edible oils and fats - Safety and hygiene requirements |
| EN 12094-2:2003 | Fixed firefighting systems - Components for gas extinguishing systems - Part 2: Requirements and test methods for non-electrical automatic control and delay devices |
| EN 12649:2008+A1:2011 | Concrete compactors and smoothing machines - Safety |
| EN 50050-3:2013 | Electrostatic hand-held spraying equipment - Safety requirements - Part 3: Hand-held spraying equipment for ignitable flock |
| EN 12098-2:2001 | Controls for heating systems - Part 2: Optimum start-stop control equipment for hot water heating systems |
| HD 638 S1:2001/A1:2006 | ROAD TRAFFIC SIGNAL SYSTEMS |
| UNI EN 1034-1 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 1: COMMON REQUIREMENTS |
| EN 12012-3:2001+A1:2008 | Plastics and rubber machines - Size reduction machines - Part 3: Safety requirements for shredders |
| EN 50490:2008 | Electrical installations for lighting and beaconing of aerodromes - Technical requirements for aeronautical ground lighting control and monitoring systems - Units for selective switching and monitoring of individual lamps |
| EN 50050:2006 | Electrical apparatus for potentially explosive atmospheres - Electrostatic hand-held spraying equipment |
| EN 12855:2003+A1:2010 | Food processing machinery - Rotating bowl cutters - Safety and hygiene requirements |
| EN 50311:2003 | Railway applications - Rolling stock - D.C. supplied electronic ballasts for lighting fluorescent lamps |
| EN 12752-1:1999 | Gas-fired type B tumble dryers of nominal heat input not exceeding 20 kW - Part 1: Safety |
| EN 12012-2:2001+A2:2008 | Plastics and rubber machines - Size reduction machines - Part 2: Safety requirements for strand pelletisers |
| EN 50014:1997/A2:1999 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - GENERAL REQUIREMENTS |
| EN 1034-2:2005+A1:2009 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 2: Barking drums |
| EN 12094-10:2003 | Fixed firefighting systems - Components for gas extinguishing systems - Part 10: Requirements and test methods for pressure gauges and pressure switches |
| EN 60974-7:2013 | Arc welding equipment - Part 7:Torches |
| EN 12255-1:2002 | Wastewater treatment plants - Part 1: General construction principles |
| DIN EN 15500:2008-12 | CONTROL FOR HEATING, VENTILATING AND AIR-CONDITIONING APPLICATIONS - ELECTRONIC INDIVIDUAL ZONE CONTROL EQUIPMENT |
| UNI EN 1218-1 : 2009 | SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 1: SINGLE END TENONING MACHINES WITH SLIDING TABLE |
| EN 60974-5:2013 | ARC WELDING EQUIPMENT - PART 5: WIRE FEEDERS (IEC 60974-5:2013) |
| EN 50548 : 2011 AMD 2 2014 | JUNCTION BOXES FOR PHOTOVOLTAIC MODULES |
| OVE/ONORM EN 50124-1 : 2011-05 | RAILWAY APPLICATIONS - INSULATION COORDINATION - PART 1: BASIC REQUIREMENTS - CLEARANCES AND CREEPAGE DISTANCES FOR ALL ELECTRICAL AND ELECTRONIC EQUIPMENT |
| CEI EN 62135-1 : 2016 | RESISTANCE WELDING EQUIPMENT - PART 1: SAFETY REQUIREMENTS FOR DESIGN, MANUFACTURE AND INSTALLATION |
| EN 88528-11:2004 | Reciprocating internal combustion engine driven alternating current generating sets - Part 11: Rotary uninterruptible power systems - Performance requirements and test methods |
| UNE-EN 50122-1:2011 | Railway applications - Fixed installations - Electrical safety, earthing and the return circuit -- Part 1: Protective provisions against electric shock |
| IPC 9592 : B | REQUIREMENTS FOR POWER CONVERSION DEVICES FOR THE COMPUTER AND TELECOMMUNICATIONS INDUSTRIES |
| EN 60726:2003 | Dry-type power transformers |
| CEI EN 62841-1 : 2016 | ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| EN 50207:2000 | Railway applications - Electronic power converters for rolling stock |
| EN 50272-2:2001 | Safety requirements for secondary batteries and battery installations - Part 2: Stationary batteries |
| 16/30334724 DC : 0 | BS EN 15433-6 - TRANSPORTATION LOADS - MEASUREMENT AND EVALUATION OF DYNAMIC MECHANICAL LOADS - PART 6: AUTOMATIC RECORDING SYSTEMS FOR MEASURING RANDOMLY OCCURRING SHOCK DURING MONITORING OF TRANSPORTS |
| I.S. EN 50411-2-9:2010 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATIONS SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-9: NON-SEALED CLOSURES FOR AIR BLOWN FIBRE MICRODUCT CABLE, FOR CATEGORY S & A |
| DIN EN 16252:2013-03 | Machines for compacting waste materials or recyclable fractions - Horizontal baling presses - Safety requirements |
| DIN EN 16207:2014-11 | RAILWAY APPLICATIONS - BRAKING - FUNCTIONAL AND PERFORMANCE CRITERIA OF MAGNETIC TRACK BRAKE SYSTEMS FOR USE IN RAILWAY ROLLING STOCK |
| PREN 1643 : DRAFT 2012 | VALVE PROVING SYSTEMS FOR AUTOMATIC SHUT-OFF VALVES FOR GAS BURNERS AND GAS APPLIANCES |
| BS EN 12261:2002 | Gas meters. Turbine gas meters |
| BS 5724-2.124(1998) : 1998 | MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR THE SAFETY OF INFUSION PUMPS AND CONTROLLERS |
| BS EN 15906:2011 | Winter maintenance equipment. Snow removal machines with rotating tools. Specification and clearing capacity |
| BS EN 60601-1-11:2015 | Medical electrical equipment General requirements for basic safety and essential performance. Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment |
| BS EN 50250 : 2002 | CONVERSION ADAPTORS FOR INDUSTRIAL USE |
| CEI 13-32 : 2000 | WATT-VAR-HOUR METERS FOR LOW-VOLTAGE THREE-PHASE NETWORKS (INTEGRATED UNITS) PRESETTED FOR PROCESSING AND REMOTE MANAGEMENT OF DATA WITH OR WITHOUT INSERTION OF CURRENT TRANSFORMERS |
| CEI EN 50543 : 2011 | ELECTRONIC PORTABLE AND TRANSPORTABLE APPARATUS DESIGNED TO DETECT AND MEASURE CARBON DIOXIDE AND/OR CARBON MONOXIDE IN INDOOR AMBIENT AIR - REQUIREMENTS AND TEST METHODS |
| CEI EN 61987-1 : 2008 | INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 1: MEASURING EQUIPMENT WITH ANALOGUE AND DIGITAL OUTPUT |
| CEI UNI EN 45545-1 : 2013 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 1: GENERAL |
| BS EN 62271-109 : 2009 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 109: ALTERNATING-CURRENT SERIES CAPACITOR BY-PASS SWITCHES |
| CEI EN 50107-2 : 2005 | SIGNS AND LUMINOUS-DISCHARGE-TUBE INSTALLATIONS OPERATING FROM A NO-LOAD RATED OUTPUT VOLTAGE EXCEEDING 1 KV BUT NOT EXCEEDING 10 KV - PART 2: REQUIREMENTS FOR EARTH-LEAKAGE AND OPEN-CIRCUIT PROTECTIVE DEVICES |
| DIN EN 12012-1:2015-05 (Draft) | PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS |
| 08/30186443 DC : DRAFT SEP 2008 | BS EN 15869-3 - INLAND NAVIGATION VESSELS - ELECTRICAL SHORE CONNECTION, THREE-PHASE CURRENT 400 V, UP TO 32 A, 50 HZ - PART 3: ON-BOARD UNIT, SAFETY REQUIREMENTS |
| I.S. EN 45510-2-5:2002 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-5: ELECTRICAL EQUIPMENT - MOTORS |
| UNI CEN/TS 15213-6 : 2011 | ROAD TRANSPORT AND TRAFFIC TELEMATICS - AFTER-THEFT SERVICES FOR THE RECOVERY OF STOLEN VEHICLES - PART 6: TEST PROCEDURES |
| NF EN 15869-2 : 2010 | INLAND NAVIGATION VESSELS - ELECTRICAL SHORE CONNECTION, THREE PHASE CURRENT 400 V, UP TO 63 A, 50 HZ - PART 2: ONSHORE UNIT, SAFETY REQUIREMENTS |
| 03/109865 DC : DRAFT JULY 2003 | BS EN 415-6 - PACKAGING MACHINES SAFETY - PART 6: PALLET WRAPPING MACHINES |
| BS EN 61076-2-106:2011 | Connectors for electronic equipment. Product requirements Circular connectors. Detail specification for connectors M 16 x 0,75 with screw-locking and degree of protection IP40 or IP65/67 |
| BS EN 50091-1-2:1999 | General and safety requirements for UPS used in restricted access locationsSpecification for uninterruptible power systems (UPS) |
| DIN EN 15955-2:2013-09 | RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| PREN 416 : DRAFT 2017 | GAS-FIRED OVERHEAD RADIANT TUBE HEATERS AND RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY |
| 11/30237566 DC : 0 | BS EN 1870-18 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 18: DIMENSION SAWS |
| 11/30247811 DC : 0 | BS EN 415-10 - SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS |
| BS EN 1501-3:2008 | Refuse collection vehicles and their associated lifting devices. General requirements and safety requirements Front loaded refuse collection vehicles |
| 12/30241400 DC : 0 | BS EN 15654-1 - RAILWAY APPLICATIONS - MEASUREMENT OF WHEEL AND AXLE LOADS - PART 1: INTEROPERABLE 'IN-SERVICE' RAIL VEHICLES |
| 17/30353695 DC : 0 | BS EN 50131-4 - ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 4: WARNING DEVICES |
| I.S. EN 12514-2:2000 | INSTALLATIONS FOR OIL SUPPLY SYSTEMS FOR OIL BURNERS - PART 2: SAFETY REQUIREMENTS AND TESTS; PARTS, VALVES, PIPES, FILTERS, OIL DE-AERATORS, METERS |
| BS EN 60335-2-10 : 2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-10: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES AND WET SCRUBBING MACHINES |
| 08/30195238 DC : 0 | |
| 03/314487 DC : DRAFT OCT 2003 | EN 50369 - LIQUID TIGHT SHEATHING SYSTEMS FOR CABLE MANAGEMENT |
| BS EN 60968:2015 | Self-ballasted fluorescent lamps for general lighting services. Safety requirements |
| UNE-EN 1870-13:2008 | Safety of woodworking machines - Circular sawing machines - Part 13: Horizontal beam panel sawing machines |
| UNE-EN 62271-204:2012 | High-voltage switchgear and controlgear - Part 204: Rigid gas-insulated transmission lines for rated voltage above 52 kV |
| I.S. EN 61754-27:2013 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 27: TYPE M12-FO CONNECTOR FAMILY (IEC 61754-27:2013 (EQV)) |
| BS EN 81-41:2010 | Safety rules for the construction and installation of lifts. Special lifts for the transport of persons and goods Vertical lifting platforms intended for use by persons with impaired mobility |
| I.S. EN 115-1:2017 | SAFETY OF ESCALATORS AND MOVING WALKS - PART 1: CONSTRUCTION AND INSTALLATION |
| I.S. EN 50206-2:2010 | RAILWAY APPLICATIONS - ROLLING STOCK - PANTOGRAPHS: CHARACTERISTICS AND TESTS - PART 2: PANTOGRAPHS FOR METROS AND LIGHT RAIL VEHICLES |
| BS EN 1870-19:2013 | Safety of woodworking machines. Circular sawing machines Circular saw benches (with and without sliding table) and building site saws |
| 01/105373 DC : DRAFT JUL 2001 | BS EN 474-1 EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 61005:2017 | RADIATION PROTECTION INSTRUMENTATION - NEUTRON AMBIENT DOSE EQUIVALENT (RATE) METERS |
| I.S. EN 60974-5:2013 | ARC WELDING EQUIPMENT - PART 5: WIRE FEEDERS (IEC 60974-5:2013 (EQV)) |
| BS EN 50119 : 2009 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES |
| 11/30244198 DC : 0 | BS EN 16282-3 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 3: KITCHEN VENTILATION CEILINGS - DESIGN AND SAFETY REQUIREMENTS |
| BS EN 61241-14:2004 | Electrical apparatus for use in the presence of combustible dust Selection and installation |
| 17/30358367 DC : 0 | BS EN 17128 - NON-APPROVED LIGHT MOTORIZED VEHICLES FOR THE TRANSPORTATION OF PERSONS AND GOODS AND RELATED FACILITIES - PERSONAL LIGHT ELECTRIC VEHICLES (PLEV) - SAFETY REQUIREMENTS AND TEST METHODS |
| BS EN 60598-2-21:2015 | Luminaires Particular requirements. Rope lights |
| I.S. EN 61987-10:2009 | INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 10: LISTS OF PROPERTIES (LOPS) FOR INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL FOR ELECTRONIC DATA EXCHANGE - FUNDAMENTALS |
| 99/703461 DC : DRAFT AUG 1999 | BS EN 50131-2-2 - ALARM SYSTEMS - INTRUSION SYSTEMS - PART 2-2: REQUIREMENTS FOR PASSIVE INFRARED DETECTORS |
| BS EN 60079-26:2015 | Explosive atmospheres Equipment with Equipment Protection Level (EPL) Ga |
| 15/30326831 DC : 0 | BS EN 1114-3 - PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS |
| I.S. EN 62790:2015 | JUNCTION BOXES FOR PHOTOVOLTAIC MODULES - SAFETY REQUIREMENTS AND TESTS |
| I.S. EN 12514-1:2000 | INSTALLATIONS FOR OIL SUPPLY SYSTEMS FOR OIL BURNERS - PART 1: SAFETY REQUIREMENTS AND TESTS - PARTS, OIL FEED PUMPS, CONTROL AND SAFETY DEVICES, SUPPLY TANKS |
| I.S. EN 12840:2001 | SAFETY OF MACHINE-TOOLS - MANUALLY CONTROLLED TURNING MACHINES WITH OR WITHOUT AUTOMATIC CONTROL |
| 13/30274904 DC : 0 | BS EN 14154-4 - WATER METERS - PART 4: ADDITIONAL FUNCTIONALITIES |
| PREN 50626-1 : DRAFT 2017 | CONDUIT SYSTEMS BURIED UNDERGROUND FOR THE PROTECTION AND MANAGEMENT OF INSULATED ELECTRICAL CABLES OR COMMUNICATION CABLES - PART 1: GENERAL REQUIREMENTS |
| 13/30286091 DC : 0 | BS EN 16678 - SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - AUTOMATIC SHUT-OFF VALVES FOR OPERATING PRESSURE OF ABOVE 500 KPA UP TO AND INCLUDING 6300 KPA |
| 04/19993045 DC : 0 | EN 14492-1 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| PREN 12405-1 : DRAFT 2017 | GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| I.S. EN 483:2000 | GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT NOT EXCEEDING 70 KW |
| UNI EN 1870-19 : 2014 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS |
| BS EN 15774:2010 | Food processing machinery. Machines for processing fresh and filled pasta (tagliatelle, cannelloni, ravioli, tortellini, orecchiette and gnocchi). Safety and hygiene requirements |
| UNI EN 16500 : 2014 | MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS |
| 12/30267815 DC : 0 | BS EN 1643 - VALVE PROVING SYSTEMS FOR AUTOMATIC SHUT-OFF VALVES FOR GAS BURNERS AND GAS APPLIANCES |
| EN 303 980 : 1.1.1 | SATELLITE EARTH STATIONS AND SYSTEMS (SES); HARMONISED STANDARD FOR FIXED AND IN-MOTION EARTH STATIONS COMMUNICATING WITH NON-GEOSTATIONARY SATELLITE SYSTEMS (NEST) IN THE 11 GHZ TO 14 GHZ FREQUENCY BANDS COVERING ESSENTIAL REQUIREMENTS OF ARTICLE 3.2 OF DIRECTIVE 2014/53/EU |
| BS EN 50588-1:2017 | Medium power transformers 50 Hz, with highest voltage for equipment not exceeding 36 kV General requirements |
| UNE-EN 50463-1:2013 | Railway applications - Energy measurement on board trains - Part 1: General |
| DD CLC/TS 50537-2:2010 | Railway applications. Mounted parts of the traction transformer and cooling system Pump for insulating liquid for traction transformers and reactors |
| I.S. EN 1870-2:1999 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 2: HORIZONTAL BEAM PANEL SAWS AND VERTICAL PANEL SAWS |
| 15/30324466 DC : 0 | BS EN 16716 - MOUNTAINEERING EQUIPMENT - AVALANCHE AIRBAG SYSTEMS - SAFETY REQUIREMENTS AND TEST METHODS |
| UNI CEN/TS 16134:2011 | CHIMNEY TERMINALS - GENARAL REQUIREMENTS AND MATERIAL INDEPENDENT TEST METHODS |
| 13/30256922 DC : 0 | BS EN 1459-1 - ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 1: VARIABLE-REACH TRUCKS |
| 15/30326124 DC : 0 | BS EN 15654-1 - RAILWAY APPLICATIONS - MEASUREMENT OF VERTICAL FORCES ON WHEELS AND WHEELSETS - PART 1: INTEROPERABLE ON-TRACK MEASUREMENT SITES FOR VEHICLES IN SERVICE |
| BS EN 1829-1:2010 | High pressure water jet machines. Safety requirements Machines |
| 04/19990095 DC : 0 | BS EN 45545-2 - RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS |
| BS EN 50463-1:2017 | Railway applications. Energy measurement on board trains General |
| 12/30235292 DC : 0 | BS EN 50343 - RAILWAY APPLICATIONS - ROLLING STOCK - RULES FOR INSTALLATION OF CABLING |
| I.S. EN 13463-5:2011 | NON-ELECTRICAL EQUIPMENT INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 5: PROTECTION BY CONSTRUCTIONAL SAFETY 'C' |
| 15/30298550 DC : 0 | BS EN 16864 - BUILDING HARDWARE - MECHATRONIC PADLOCKS - REQUIREMENTS AND TEST METHODS |
| 15/30321305 DC : 0 | BS EN 15194 - CYCLES - ELECTRICALLY POWER ASSISTED CYCLES - EPAC BICYCLES |
| BS EN 15093:2008 | Safety of machinery. Safety requirements for hot flat rolling mills |
| BS EN 60601-2-38:1997 | Medical electrical equipment. Particular requirements for safety Particular requirements for the safety of electrically operated hospital beds |
| BS EN 81-43:2009 | Safety rules for the construction and installation of lifts. Special lifts for the transport of persons and goods Lifts for cranes |
| 05/30133451 DC : 0 | EN 115 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF ESCALATORS AND MOVING WALKS |
| BS EN 14033-3 : 2009 | RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS |
| 17/30356713 DC | BS EN 88-3. Safety and control devices for gas burners and gas burning appliances. Part 3. Pressure and/or flow rate regulators for inlet pressures up to and including 500 kPa, electronic types |
| BS EN 12830:1999 | Temperature recorders for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream. Tests, performance and suitability |
| 11/30248842 DC : 0 | BS EN 50050-1:2011 - ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 1: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE LIQUID COATING MATERIALS |
| PD CLC/TR 50656:2016 | SPD application in conjunction with Class II equipment |
| BS EN 62026-7:2013 | Low-voltage switchgear and controlgear. Controller-device interfaces (CDIs) CompoNet |
| EN 1218-5:2004+A1:2009 | Safety of woodworking machines - Tenoning machines - Part 5: One side profiling machines with fixed table and feed rollers or feed chain |
| BS EN 50164-6:2009 | Lightning protection components (LPC) Requirements for lightning strike counters |
| 02/203341 DC : DRAFT FEB 2002 | PREN 50379-1 - SPECIFICATION FOR PORTABLE ELECTRICAL APPARATUS DESIGNED TO MEASURE COMBUSTION FLUE GAS PARAMETERS OF HEATING APPLIANCES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
| 12/30260942 DC : 0 | BS EN 13871 - FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINERY - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN 14154-4:2015-02 | Water meters - Part 4: Additional functionalities |
| DD ENV 13093:1998 | Public transport. Road vehicles. Driver\'s console mechanical interface requirements. Minimum display and keypad parameters |
| 13/30259082 DC : 0 | BS EN 13278 - OPEN FRONTED GAS-FIRED INDEPENDENT SPACE HEATERS |
| DIN EN 15001-1:2011-02 | Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
| I.S. EN 12405:2002 | GAS METERS - GAS-VOLUME ELECTRONIC CONVERSION DEVICES |
| PREN 1672-1 : DRAFT 2012 | FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS |
| BS EN 61076-3-106:2006 | Connectors for electronic equipment. Product requirements Rectangular connectors. Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 series interface |
| CEI EN 62094-1 : 2004 | INDICATOR LIGHT UNITS FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS |
| UNI EN 13035-11 : 2010 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 11: DRILLING MACHINES |
| I.S. EN 60998-1:2004 | CONNECTING DEVICES FOR LOW-VOLTAGE CIRCUITS FOR HOUSEHOLD AND SIMILAR PURPOSES - PART 1: GENERAL REQUIREMENTS |
| 06/30156494 DC : 0 | BS EN 15572 - MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONES - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES |
| I.S. EN 1010-5:2005 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 5: MACHINES FOR THE PRODUCTION OF CORRUGATED BOARD AND MACHINES FOR THE CONVERSION OF FLAT AND CORRUGATED BOARD |
| 15/30304603 DC : 0 | BS EN 50066 - MINI-COUPLERS FOR THE INTERCONNECTION OF ELECTRICAL MAINS SUPPLIED EQUIPMENT IN ROAD VEHICLES |
| UNI EN 81-41 : 2011 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 41: VERTICAL LIFTING PLATFORMS INTENDED FOR USE BY PERSONS WITH IMPAIRED MOBILITY |
| BS EN 60998-2-1:2004 | Connecting devices for low-voltage circuits for household and similar purposes Particular requirements for connecting devices as separate entities with screw-type clamping units |
| BS EN 62718:2016 | Railway applications. Rolling stock. DC supplied electronic ballasts for lighting fluorescent lamps |
| NF EN 54-23 : 2010 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 23: FIRE ALARM DEVICES - VISUAL ALARM DEVICES |
| 02/103833 DC : DRAFT MAY 2002 | PREN 1648-2 - LEISURE ACCOMMODATION VEHICLES - 12 V DIRECT CURRENT EXTRA LOW VOLTAGE ELECTRICAL INSTALLATIONS - PART 2: MOTOR CARAVANS |
| 02/708067 DC : DRAFT SEP 2002 | BS EN 50131-2-4 - ALARM SYSTEMS - INTRUSION SYSTEMS - PART 2-4: REQUIREMENTS FOR COMBINED PASSIVE INFRARED AND MICROWAVE DETECTORS |
| BS EN 61005:2004 | Radiation protection instrumentation. Neutron ambient dose equivalent (rate) meters |
| CEN/TR 16040:2010 | Electronic fee collection - Requirements for urban dedicated short-range communication |
| 17/30341013 DC : DRAFT AUG 2017 | BS EN 50119 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES |
| 02/121895 DC : DRAFT APR 2002 | BS EN 13060 - SMALL STEAM STERILIZERS |
| 13/30251582 DC : 0 | BS EN 50617-2 - RAILWAYS APPLICATIONS - BASIC PARAMETERS OF TRAIN DETECTION SYSTEMS - PART 2: AXLE COUNTERS |
| 09/30198762 DC : 0 | BS EN 1807-1 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 1: TABLE BAND SAWS AND BAND RE-SAWS |
| 13/30291469 DC : 0 | BS EN 13870 - FOOD PROCESSING MACHINERY - PORTION CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| 16/30342256 DC : 0 | BS EN 50107-3 - PRODUCT STANDARD COVERING LUMINOUS SIGNS WITH DISCHARGE LAMPS AND/OR LED (LIGHT EMITTING DIODES) AND/OR EL (ELECTROLUMINESCENT) LIGHTSOURCES WITH A NOMINAL VOLTAGE NOT EXCEEDING 1000 V, WITH THE EXCLUSION OF GENERAL LIGHTING, TRAFFIC- OR EMERGENCY RELATED PURPOSE |
| BS EN 45510-2-7:2002 | Guide for the procurement of power station equipment. Electrical equipment Switchgear and controlgear |
| BS EN 15572:2015 | Machines and plants for mining and tooling of natural stone. Safety. Requirements for edge finishing machines |
| 17/30354245 DC : 0 | BS EN 1648-1 - LEISURE ACCOMMODATION VEHICLES - 12 V DIRECT CURRENT EXTRA LOW VOLTAGE ELECTRICAL INSTALLATIONS - PART 1: CARAVANS |
| DIN EN 12693:2016-10 (Draft) | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS |
| BS 5266-8(2004) : 2004 | EMERGENCY ESCAPE LIGHTING SYSTEMS |
| BS EN 50281-1-1:1999 | Electrical apparatus for use in the presence of combustible dust. Electrical apparatus protected by enclosures Construction and testing |
| EN 61800-2:2015 | Adjustable speed electrical power drive systems - Part 2: General requirements - Rating specifications for low voltage adjustable speed a.c. power drive systems |
| BS EN 60255-27:2014 | Measuring relays and protection equipment Product safety requirements |
| PD CLC/TS 50131-11:2012 | Alarm systems. Intrusion and hold-up systems Hold-up devices |
| 14/30262209 DC : 0 | BS EN 50411-3-8 - FIBRE ORGANIZERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-8: FIBRE MANAGEMENT SYSTEM, TERMINAL EQUIPMENT BOX TYPE 1 FOR CATEGORY C |
| 08/30180312 DC : DRAFT MAR 2008 | BS EN 50223 - STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE FLOCK MATERIAL - SAFETY REQUIREMENTS |
| EN 474-1:2006+A5:2018 | Earth-moving machinery - Safety - Part 1: General requirements |
| CEI EN 61316 : 2000 | INDUSTRIAL CABLE REELS |
| CEI EN 50131-2-6 : 2009 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-6: OPENING CONTACTS (MAGNETIC) |
| DIN EN 15267-4:2015-08 (Draft) | AIR QUALITY - CERTIFICATION OF AUTOMATED MEASURING SYSTEMS - PART 4: PERFORMANCE CRITERIA AND TEST PROCEDURES FOR AUTOMATED MEASURING SYSTEMS FOR PERIODIC MEASUREMENTS OF EMISSIONS FROM STATIONARY SOURCES |
| PREN 1114-3 : DRAFT 2015 | PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS |
| PREN 17175 : DRAFT 2017 | GAS-FIRED OVERHEAD RADIANT STRIP HEATERS AND MULTI-BURNER CONTINUOUS RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY |
| 15/30317830 DC : 0 | BS EN 14504 - INLAND NAVIGATION VESSELS - FLOATING LANDING STAGES AND FLOATING BRIDGES ON INLAND WATERS - REQUIREMENTS, TESTS |
| DIN EN 15094:2009-04 | Safety of machinery - Safety requirements for cold flat rolling mills |
| I.S. EN 62444:2013 | CABLE GLANDS FOR ELECTRICAL INSTALLATIONS (IEC 62444:2010 (MOD)) |
| DD CLC/TS 50131-2-7-2:2009 | Alarm systems. Intrusion and hold-up systems Intrusion detectors. Glass break detectors (passive) |
| 16/30299837 DC : 0 | BS EN 50131-6 - ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 6: POWER SUPPLIES |
| 16/30339543 DC : 0 | BS EN 62820-3-2 ED 1.0 - BUILDING INTERCOM SYSTEMS - PART 3-2: APPLICATION GUIDELINES - ADVANCED SECURITY BUILDING INTERCOM |
| CEI 216-8 : 2005 | FLUSH-TYPE DETECTORS FOR THE DETECTION OF COMBUSTIBLE GASES IN DOMESTIC PREMISES - TEST METHODS AND PERFORMANCE REQUIREMENTS |
| PREN 81-40 : DRAFT 2017 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 40: STAIRLIFTS AND INCLINED LIFTING PLATFORMS INTENDED FOR PERSONS WITH IMPAIRED MOBILITY |
| 11/30237557 DC : 0 | BS EN 1870-11 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI-AUTOMATIC AND AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS) |
| BS EN 15714-3:2009 | Industrial valves. Actuators Pneumatic part-turn actuators for industrial valves. Basic requirements |
| I.S. EN 61241-14:2004 | ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 14: SELECTION AND INSTALLATION |
| DIN EN 15571:2015-03 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for surface finishing machines |
| DIN EN 45545-1:2013-08 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 1: GENERAL |
| I.S. EN 61730-1:2007 | PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION |
| DIN EN 1807-2:2013-06 | Safety of woodworking machines - Band sawing machines - Part 2: Log sawing machines; German version EN 1807-2:2013 |
| BS EN 3660-066:2017 | Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors Cable outlet, style K, 90°, for heat shrinkable boot, shielded, sealed. Product standard |
| 12/30232434 DC : 0 | BS EN 1870-5:2002+A1:2009 AMD 2 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 5: CIRCULAR SAWBENCHES/UP-CUTTING CROSS-CUT SAWING MACHINES |
| 12/30259421 DC : 0 | BS EN 1672-1 - FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS |
| 10/30233953 DC : 0 | BS EN 16191 - TUNNELLING MACHINERY - SAFETY REQUIREMENTS |
| PREN 62444 : DRAFT 2013 | CABLE GLANDS FOR ELECTRICAL INSTALLATIONS (IEC 62444:2010, MODIFIED) |
| I.S. EN 50083-3:2002 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 3: ACTIVE WIDEBAND EQUIPMENT FOR COAXIAL CABLE NETWORKS |
| PREN 61008-1 : DRAFT 2011 | RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITHOUT INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCCBS) - PART 1: GENERAL RULES |
| BS EN 60320-2-3:1999 | Appliance couplers for household and similar general purposes Appliance coupler with a degree of protection higher than IPX0 |
| UNI EN 16191 : 2014 | TUNNELLING MACHINERY - SAFETY REQUIREMENTS |
| 02/540765 DC : DRAFT SEP 2002 | BS EN 13463-3 - NON-ELECTRICAL EQUIPMENT FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 3: PROTECTION BY FLAMEPROOF ENCLOSURE 'D' |
| DD CLC/TS 50537-3:2010 | Railway applications. Mounted parts of the traction transformer and cooling system Water pump for traction converters |
| BS EN 14504:2009 | Inland navigation vessels. Floating landing stages. Requirements, tests |
| BS EN 50131-2-8:2016 | Alarm systems. Intrusion and hold-up systems Intrusion detectors. Shock detectors |
| NF EN 50130-5 : 2011 | ALARM SYSTEMS - PART 5: ENVIRONMENTAL TEST METHODS |
| 96/205308 DC : 0 | PREN 50245 - PLUGS AND SOCKET-OUTLETS 16A 250 V A.C. FOR HOUSEHOLD AND SIMILAR PURPOSES GENERAL REQUIREMENTS AND DIMENSIONS VARIANT 1 (3P + 2P) |
| BS EN 50078:1994 | Torches and guns for arc welding |
| BS EN 50125-1:2014 | Railway applications. Environmental conditions for equipment Rolling stock and on-board equipment |
| I.S. EN 50066:1993 | MINI-COUPLERS FOR THE INTERCONNECTION OF ELECTRICAL MAINS SUPPLIED EQUIPMENT IN ROAD VEHICLES SAFETY REQUIREMENTS FOR RADIO TRANSMITTING EQUIPMENT |
| 99/715383 DC : DRAFT OCT 1999 | BS EN 50131-4 - ALARM SYSTEMS - INTRUSION SYSTEMS - PART 4: WARNING DEVICES |
| 13/30275356 DC : 0 | BS EN 12966 - ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS |
| BS 7654:1993 | Specification for single phase street lighting fuses (cut-outs) for low-voltage public electricity distribution systems. 25 A rating for highway power supplies and street furniture |
| DIN EN 15093:2009-06 | Safety of machinery - Safety requirements for hot flat rolling mills |
| 04/30114100 DC : DRAFT MAY 2004 | PREN 14958 - GRAIN PROCESSING EQUIPMENT - GRINDING AND PROCESSING FLOUR AND SEMOLINA - SAFETY AND HYGIENE REQUIREMENTS |
| UNE-EN 691-1:2013 | Safety of woodworking machines - Part 1: Common requirements |
| I.S. EN 12151:2007 | MACHINERY AND PLANTS FOR THE PREPARATION OF CONCRETE AND MORTAR - SAFETY REQUIREMENTS |
| 10/30230365 DC : 0 | BS EN 50050-2 - ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT SAFETY REQUIREMENTS - PART 2: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE COATING POWDER |
| UNE-EN 50125-1:2014 | Railway applications - Environmental conditions for equipment - Part 1: Rolling stock and on-board equipment |
| BS EN 50502:2015 | Railway applications. Rolling stock. Electric equipment in trolley buses. Safety requirements and current collection systems |
| BS EN 50526-2:2014 | Railway applications. Fixed installations. D.C. surge arresters and voltage limiting devices Voltage limiting devices |
| BS EN 50541-1:2011 | Three phase dry-type distribution transformers 50 Hz, from 100 kVA to 3150 kVA, with highest voltage for equipment not exceeding 36 kV General requirements |
| 11/30251968 DC : 0 | BS EN 454 - FOOD PROCESSING MACHINERY - PLANETARY MIXERS - SAFETY AND HYGIENE REQUIREMENTS |
| 07/30163042 DC : DRAFT AUG 2007 | BS EN 1319 - DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING, WITH FAN-ASSISTED BURNERS NOT EXCEEDING A NET HEAT INPUT OF 70 KW |
| DIN EN 15164:2008-09 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR CHAIN AND BELT SLOTTING MACHINES |
| 11/30246708 DC : 0 | BS EN 62561-6 - LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 6: REQUIREMENTS FOR LIGHTNING STRIKE COUNTERS (LSC) |
| BS EN 61076-7-100:2006 | Connectors for electronic equipment. Product requirements Cable outlet accessories. Detail specification for a metric cable sealing consisting of an integrated part of heavy-duty rectangular or circular connector hoods and a sealing system |
| BS EN 50227:1999 | Control circuit devices and switching elements proximity sensors, d.c. interface for proximity sensors and switching amplifiers (NAMUR) |
| 07/30166915 DC : DRAFT AUG 2007 | BS EN 15714-4 - INDUSTRIAL VALVES - ACTUATORS - PART 4: HYDRAULIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| UNE-EN 61184:2011 | Bayonet lampholders |
| 02/710617 DC : 0 | BS EN 14492-2 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| BS EN 15714-2:2009 | Industrial valves. Actuators Electric actuators for industrial valves. Basic requirements |
| BS EN 16716:2017 | Mountaineering equipment. Avalanche airbag systems. Safety requirements and test methods |
| PREN 1870-11 : DRAFT 2011 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI-AUTOMATIC AND AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS) |
| CLC/TS 50537-2:2010 | Railway applications - Mounted parts of the traction transformer and cooling system - Part 2: Pump for insulating liquid for traction transformers and reactors |
| UNI EN 16304 : 2013 | AUTOMATIC VENT VALVES FOR GAS BURNERS AND GAS BURNING APPLIANCES |
| BS EN 15000:2008 | Safety of industrial trucks. Self propelled variable reach trucks. Specification, performance and test requirements for longitudinal load moment indicators and longitudinal load moment limiters |
| BS EN 50083-3:1999 | Cabled distribution systems for television and sound signals Active wideband equipment for coaxial cable networks |
| 15/30295265 DC : 0 | BS EN 13204 - DOUBLE ACTING HYDRAULIC RESCUE TOOLS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS |
| UNI EN 15093 : 2009 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HOT FLAT ROLLING MILLS |
| BS EN 61754-27:2013 | Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces Type M12-FO connector family |
| 04/30121837 DC : DRAFT SEP 2004 | EN 50085-1 - CABLE TRUNKING SYSTEMS AND CABLE DUCTING SYSTEMS FOR ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS |
| PREN 1889-1 : DRAFT 2010 | MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES |
| 12/30259995 DC : 0 | BS EN 12463 - FOOD PROCESSING MACHINERY - FILLING MACHINES AND AUXILIARY MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| 11/30244195 DC : 0 | BS EN 16282-2 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION OF COMMERCIAL KITCHENS - PART 2: KITCHEN VENTILATION HOODS - DESIGN AND SAFETY REQUIREMENTS |
| BS EN 50125-3:2003 | Railway applications. Environmental conditions for equipment Equipment for signalling and telecommunications |
| 93/216721 DC : DRAFT DEC 1993 | PREN 50172 - EMERGENCY ESCAPE LIGHTING SYSTEMS |
| 96/101548 DC : DRAFT MAR 1996 | BS EN 12336 TUNNELLING MACHINES - SHIELD MACHINES, HORIZONTAL THRUST-BORING MACHINES, LINING ERECTION EQUIPMENT - SAFETY REQUIREMENTS |
| DIN EN 50107 : 1998 | SIGNS AND LUMINOUS-DISCHARGE-TUBE INSTALLATIONS OPERATING FROM A NO-LOAD OUTPUT VOLTAGE EXCEEDING 1 KV BUT NOT EXCEEDING 10 KV |
| BS EN 16304:2013 | Automatic vent valves for gas burners and gas burning appliances |
| BS EN 15650:2010 | Ventilation for buildings. Fire dampers |
| ENV 50234 : DRAFT 1997 | AVIATION GROUND LIGHTING ELECTRICAL INSTALLATION - FLASHING LIGHTS: EQUIPMENT SPECIFICATIONS AND TESTS |
| PREN 50131-6 : DRAFT 2016 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 6: POWER SUPPLIES |
| 15/30331519 DC : 0 | BS EN 15500-1 - CONTROL FOR HEATING, VENTILATING AND AIR-CONDITIONING APPLICATIONS - PART 1: ELECTRONIC INDIVIDUAL ZONE CONTROL EQUIPMENT - MODULES M3-5, M4-5, M5-5 |
| 11/30240323 DC : 0 | BS EN 16252 - MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - HORIZONTAL BALING PRESSES - SAFETY REQUIREMENTS |
| UNI CEI EN 45510-2-5 : 2011 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-5: ELECTRICAL EQUIPMENT - MOTORS |
| BS EN 62586-1:2017 | Power quality measurement in power supply systems Power quality instruments (PQI) |
| 12/30235267 DC : 0 | BS EN 50125-1 - RAILWAY APPLICATIONS - ENVIRONMENTAL CONDITIONS FOR EQUIPMENT - PART 1: EQUIPMENT ON BOARD ROLLING STOCK |
| DD ENV 50091-3:1999 | Specification for uninterruptible power systems (UPS) Performance requirements and test methods |
| 12/30270038 DC : 0 | BS EN 16500 - MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS |
| BS EN 16191:2014 | Tunnelling machinery. Safety requirements |
| 17/30347865 DC : 0 | BS EN 50411-3-4 - FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-4: FIBRE MANAGEMENT SYSTEMS, WALL BOX FOR SPLICE TO PATCHCORD CONNECTIONS, FOR CATEGORY C AND A |
| BS EN 50215:2009 | Railway applications — Rolling stock — Testing of rolling stock on completion of construction and before entry into service |
| BS 5724-2.38(1997) : 1997 | MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR SAFETY - PARTICULAR REQUIREMENTS FOR THE SAFETY OF ELECTRICALLY OPERATED HOSPITAL BEDS |
| BS EN 50464-2-2:2007 | Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2500 kVA with highest voltage for equipment not exceeding 36 kV Distribution transformers with cable boxes on the high-voltage and/or low-voltage side. Cable boxes type 1 for use on distribution transformers meeting the requirements of EN 50464-2-1 |
| DIN EN 1829-1:2010-05 | High pressure water jet machines - Safety requirements - Part 1: Machines |
| UNE-EN 60974-11:2011 | Arc welding equipment - Part 11: Electrode holders |
| UNE-EN 50136-2:2013 | Alarm systems - Alarm transmission systems and equipment - Part 2: Requirements for Supervised Premises Transceiver (SPT) |
| UNE-EN 16564:2015 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions |
| 08/30175637 DC : DRAFT MAR 2008 | BS EN 15774 - FOOD PROCESSING MACHINERY - MACHINES FOR PROCESSING FRESH AND FILLED PASTA (TAGLIATELLE, CANNELLONI, RAVIOLI, TORTELLINI, ORECCHIETTE AND GNOCCHI) - SAFETY AND HYGIENE REQUIREMENTS |
| 11/30234386 DC : 0 | BS EN 1808 - SUSPENDED ACCESS EQUIPMENT - DESIGN CALCULATIONS, STABILITY CRITERIA AND CONSTRUCTION - EXAMINATIONS AND TESTS |
| BS EN 50131-3:2009 | Alarm systems. Intrusion and hold-up systems Control and indicating equipment |
| 13/30276231 DC : 0 | BS EN 13718-1 - MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS FOR MEDICAL DEVICES USED IN AIR AMBULANCES |
| 15/30317827 DC : 0 | BS EN 16840 - INLAND NAVIGATION VESSELS - ELECTRICAL SHORE CONNECTION, THREEPHASE CURRENT 400 V, 50 HZ AND AT LEAST 250 A |
| 08/30187719 DC : 0 | BS EN 1493 - VEHICLE LIFTS |
| BS EN 15268:2008 | Petrol filling stations. Safety requirements for the construction of submersible pump assemblies |
| 17/30354248 DC : 0 | BS EN 1648-2 - LEISURE ACCOMMODATION VEHICLES - 12 V DIRECT CURRENT EXTRA LOW VOLTAGE ELECTRICAL INSTALLATIONS - PART 2: MOTOR CARAVANS |
| 07/30134620 DC : 0 | BS EN 50131-6 - ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 6: POWER SUPPLIES |
| BS EN 16743:2016 | Food processing machinery. Automatic industrial slicing machines. Safety and hygiene requirements |
| BS EN 62208:2011 | Empty enclosures for low-voltage switchgear and controlgear assemblies. General requirements |
| 13/30286132 DC : 0 | BS EN 13616-2 - OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID FUELS - REQUIREMENTS AND TEST/ASSESSMENT METHODS - PART 2: OVERFILL PREVENTION DEVICES WITHOUT CLOSURE DEVICE |
| 11/30250549 DC : 0 | BS EN 14471 - CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS |
| 03/118895 DC : 0 | EN 12622 - SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES |
| 93/210506 DC : DRAFT AUG 1993 | EN 50156 ELECTRICAL EQUIPMENT FOR FURNACES - PART 1 RULES FOR INSTALLATION (PREN 50156-1) |
| BS EN 16486:2014 | Machines for compacting waste materials or recyclable fractions. Compactors. Safety requirements |
| BS EN 62040-1-1:2003 | Uninterruptible power systems (UPS) General and safety requirements for UPS used in operator access areas |
| CEI EN 50176 : 2010 | STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE LIQUID COATING MATERIAL - SAFETY REQUIREMENTS |
| CEI EN 50249 : 2003 | ELECTROMAGNETIC LOCATORS FOR BURIED PIPES AND CABLES - PERFORMANCE AND SAFETY |
| CEI EN 50467 : 2013 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS |
| 10/30227671 DC : 0 | BS EN 14678-1 - LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS |
| 03/114108 DC : DRAFT AUG 2003 | EN 14655 - FOOD PROCESSING MACHINERY - BAGUETTE SLICERS - SAFETY AND HYGIENE REQUIREMENTS |
| 15/30329543 DC : 0 | BS EN 50463-1 - RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 1: GENERAL |
| PREN 12952-11 : DRAFT 99 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - REQUIREMENTS FOR LIMITING DEVICES AND SAFETY CIRCUITS OF THE BOILER AND ACCESSORIES |
| BS EN 62676-1-1:2014 | Video surveillance systems for use in security applications System requirements. General |
| CLC/TS 50537-3:2010 | Railway applications - Mounted parts of the traction transformer and cooling system - Part 3: Water pump for traction converters |
| CEI EN 61076-2-106 : 2012 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-106: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CONNECTORS M 16 X 0,75 WITH SCREW-LOCKING AND DEGREE OF PROTECTION IP40 OR IP65/67 |
| CEI EN 61851-22 : 2003 | ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 22: AC ELECTRIC VEHICLE CHARGING STATION |
| BS EN 61587-4:2012 | Mechanical structures for electronic equipment. Tests for IEC 60917 and IEC 60297 series Combination of performance levels for modular cabinets |
| 13/30276223 DC : 0 | BS EN 15572 - MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES |
| I.S. EN 62852:2015 | CONNECTORS FOR DC-APPLICATION IN PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS |
| 09/30201429 DC : 0 | BS EN 280 - MOBILE ELEVATING WORK PLATFORMS - DESIGN CALCULATIONS - STABILITY CRITERIA - CONSTRUCTION - SAFETY - EXAMINATION AND TESTS |
| 96/205309 DC : 0 | PREN 50245 - PLUGS AND SOCKET-OUTLETS 16 A 250V A.C. FOR HOUSEHOLD AND SIMILAR PURPOSES - GENERAL REQUIREMENTS AND DIMENSIONS VARIANT 2 (3P) |
| 04/30124285 DC : 0 | EN 15059 - SNOW GROOMING EQUIPMENT - SAFETY REQUIREMENTS |
| BS EN 50065-4-7:2005 | Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz and 1,6 MHz to 30 MHz Portable low voltage decoupling filters. Safety requirements |
| CEI UNI EN 45510-2-7 : 2006 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-7: ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR |
| I.S. HD 384-7-754:2005 | ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 7: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - SECTION 754: ELECTRICAL INSTALLATIONS IN CARAVANS AND MOTOR-CARAVANS |
| BS EN 12693:2008 | Refrigerating systems and heat pumps. Safety and environmental requirements. Positive displacement refrigerant compressors |
| I.S. EN IEC 62613-1:2018 | PLUGS, SOCKET-OUTLETS AND SHIP COUPLERS FOR HIGH-VOLTAGE SHORE CONNECTION SYSTEMS (HVSC-SYSTEMS) - PART 1: GENERAL REQUIREMENTS |
| EN 61076-2-113:2017 | Connectors for electronic equipment - Product requirements - Part 2-113: Circular connectors - Detail specification for connectors with M12 screw locking with power and signal contacts for data transmission with frequency up to 100 MHz |
| BS EN 50216-11:2008 | Power transformer and reactor fittings Oil and winding temperature indicators |
| PREN 88-3 : DRAFT 2017 | SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - PART 3: PRESSURE AND/OR FLOW RATE REGULATORS FOR INLET PRESSURES UP TO AND INCLUDING 500 KPA, ELECTRONIC TYPES |
| 04/30119106 DC : DRAFT AUG 2004 | EN 14972 - FIXED FIREFIGHTING SYSTEMS - WATERMIST SYSTEMS - DESIGN AND INSTALLATION |
| 04/301783 DC : DRAFT JAN 2004 | EN 848-3 - SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 3: NUMERICALLY CONTROLLED (NC) BORING MACHINES AND ROUTING MACHINES |
| BS EN 50381:2004 | Transportable ventilated rooms with or without an internal source of release |
| CEI EN 62689-1 : 1ED 2017 | CURRENT AND VOLTAGE SENSORS OR DETECTORS, TO BE USED FOR FAULT PASSAGE INDICATION PURPOSES - PART 1: GENERAL PRINCIPLES AND REQUIREMENTS |
| PREN 50467 : DRAFT 2009 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS |
| PREN 50124-1 : DRAFT 2015 | RAILWAY APPLICATIONS - INSULATION COORDINATION - PART 1: BASIC REQUIREMENTS - CLEARANCES AND CREEPAGE DISTANCES FOR ALL ELECTRICAL AND ELECTRONIC EQUIPMENT |
| 17/30363956 DC : 0 | BS EN 419 - GAS-FIRED OVERHEAD LUMINOUS RADIANT HEATERS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY |
| CEI EN 50486 : 2009 | EQUIPMENT FOR USE IN AUDIO AND VIDEO DOOR-ENTRY SYSTEMS |
| BS EN 50016:2002 | Electrical apparatus for potentially explosive atmospheres. Pressurized apparatus \'p\' |
| I.S. EN 61158-2:2014 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 2: PHYSICAL LAYER SPECIFICATION AND SERVICE DEFINITION |
| I.S. EN 62676-1-1:2014 | VIDEO SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 1-1: SYSTEM REQUIREMENTS - GENERAL |
| BS EN 45510-2-5:2002 | Guide for the procurement of power station equipment. Electrical equipment Motors |
| BS EN 1672-1:2014 | Food processing machinery. Basic concepts Safety requirements |
| CEI EN 50299-2 : 2016 | OIL-IMMERSED CABLE CONNECTION ASSEMBLIES FOR TRANSFORMERS AND REACTORS HAVING HIGHEST VOLTAGE FOR EQUIPMENT UM FROM 72,5 KV TO 550 KV - PART 2: DRY-TYPE CABLE TERMINATIONS |
| PREN 89 : DRAFT 2012 | GAS-FIRED STORAGE WATER HEATERS FOR THE PRODUCTION OF DOMESTIC HOT WATER |
| 05/30099720 DC : DRAFT AUG 2005 | EN 12368 - TRAFFIC CONTROL EQUIPMENT - SIGNAL HEADS |
| I.S. EN 60728-11:2017 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 11: SAFETY |
| I.S. EN 16486:2014 | MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS |
| I.S. EN 62271-100:2009 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 100: ALTERNATING-CURRENT CIRCUIT-BREAKERS |
| I.S. EN 16314:2013 | GAS METERS - ADDITIONAL FUNCTIONALITIES |
| I.S. EN 15093:2008 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HOT FLAT ROLLING MILLS |
| PREN 12309-2 : DRAFT 2013 | GAS-FIRED SORPTION APPLIANCES FOR HEATING AND/OR COOLING WITH A NET HEAT INPUT NOT EXCEEDING 70 KW - PART 2: SAFETY |
| CEI EN 60974-8 : 2011 | ARC WELDING EQUIPMENT - PART 8: GAS CONSOLES FOR WELDING AND PLASMA CUTTING SYSTEMS |
| I.S. EN 60255-27:2014 | MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 27: PRODUCT SAFETY REQUIREMENTS |
| I.S. EN 60998-2-2:2004 | CONNECTING DEVICES FOR LOW-VOLTAGE CIRCUITS FOR HOUSEHOLD AND SIMILAR PURPOSES - PART 2-2: PARTICULAR REQUIREMENTS FOR CONNECTING DEVICES AS SEPARATE ENTITIES WITH SCREWLESS-TYPE CLAMPING UNITS |
| 08/30180781 DC : DRAFT APR 2008 | BS EN 50164-6 - LIGHTNING PROTECTION COMPONENTS (LPC) - PART 6: REQUIREMENTS FOR LIGHTNING STRIKE COUNTERS |
| I.S. EN 16840:2017 | INLAND NAVIGATION VESSELS - ELECTRICAL SHORE CONNECTION, THREE-PHASE CURRENT 400 V, 50 HZ, AT LEAST 250 A |
| BS EN 61076-3-116:2008 | Connectors for electronic equipment. Product requirements Rectangular connectors. Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface. Variant 13 related to IEC 61076-3-106. Locking lever |
| 06/30106983 DC : 0 | EN 13718-1 - MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS OF MEDICAL DEVICES USED IN AIR AMBULANCES |
| CEI UNI EN 50194 : 2001 | ELECTRICAL APPARATUS FOR THE DETECTION OF COMBUSTIBLE GASES IN DOMESTIC PREMISES - TEST METHODS AND PERFORMANCE REQUIREMENTS |
| CEI EN 61526 : 2013 | RADIATION PROTECTION INSTRUMENTATION - MEASUREMENT OF PERSONAL DOSE EQUIVALENTS HP(10) AND HP(0,07) FOR X, GAMMA, NEUTRON AND BETA RADIATIONS - DIRECT READING PERSONAL DOSE EQUIVALENT METERS |
| BS EN 60079-29-1:2007 | Explosive atmospheres Gas detectors. Performance requirements of detectors for flammable gases |
| 09/30202310 DC : 0 | BS EN 12514-2 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 2: SAFETY REQUIREMENTS AND TESTS - FEED PUMPS, CONTROL AND SAFETY DEVICES, SERVICE VESSELS |
| I.S. EN 12966:2014 | ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS |
| CEI EN 60077-1 : 2002 | RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 1: GENERAL SERVICE CONDITIONS AND GENERAL RULES |
| BS EN 50465:2015 | European product standard for combined heating power systems using gas fuel |
| PREN 15746-2 : DRAFT 2015 | RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| I.S. EN 50215:2009 | RAILWAY APPLICATIONS - ROLLING STOCK - TESTING OF ROLLING STOCK ON COMPLETION OF CONSTRUCTION AND BEFORE ENTRY INTO SERVICE |
| DIN EN 15500-1:2016-01 (Draft) | ENERGY PERFORMANCE OF BUILDINGS - CONTROL FOR HEATING, VENTILATING AND AIR CONDITIONING APPLICATIONS - PART 1: ELECTRONIC INDIVIDUAL ZONE CONTROL EQUIPMENT - MODULES M3-5, M4-5, M5-5 |
| PREN 3660-001 : 200P3 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 001: TECHNICAL SPECIFICATION |
| DIN EN 1570-1:2015-01 | Safety requirements for lifting tables - Part 1: Lifting tables serving up to two fixed landings (includes Amendment A1:2014) |
| PREN 61009-1 : DRAFT 2011 | RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITH INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCBOS) - PART 1: GENERAL RULES |
| CEI EN 62864-1 : 1ED 2017 | RAILWAY APPLICATIONS - ROLLING STOCK - POWER SUPPLY WITH ONBOARD ENERGY STORAGE SYSTEM - PART 1: SERIES HYBRID SYSTEM |
| I.S. EN 61757-1:2012 | FIBRE OPTIC SENSORS - PART 1: GENERIC SPECIFICATION (IEC 61757-1:2012 (EQV)) |
| UNE-EN 61557-12:2010 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures -- Part 12: Performance measuring and monitoring devices (PMD) |
| UNE-EN 12405-3:2016 | Gas meters - Conversion devices - Part 3: Flow computer |
| ISO 19202-1:2017 | Summer toboggan runs — Part 1: Safety requirements and test methods |
| CEI EN 50490 : 2009 | ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - TECHNICAL REQUIREMENTS FOR AERONAUTICAL GROUND LIGHTING CONTROL AND MONITORING SYSTEMS - UNITS FOR SELECTIVE SWITCHING AND MONITORING OF INDIVIDUAL LAMPS |
| UNI EN 81-80 : 2009 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - EXISTING LIFTS - PART 80: RULES FOR THE IMPROVEMENT OF SAFETY OF EXISTING PASSENGER AND GOODS PASSENGER LIFTS |
| CEI UNI EN 45510-2-4 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-4: ELECTRICAL EQUIPMENT - HIGH POWER STATIC CONVERTORS |
| UNE-EN 50131-10:2014 | Alarm systems - Intrusion and hold-up systems - Part 10: Application specific requirements for Supervised Premises Transceiver (SPT) |
| CEI EN 60945 : 2003 | MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - GENERAL REQUIREMENTS - METHODS OF TESTING AND REQUIRED TEST RESULTS |
| S.R. CLC/TS 50131-2-7-1:2009 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-1: INTRUSION DETECTORS - GLASS BREAK DETECTORS (ACOUSTIC) |
| EN 50123-7-2:2003 | Railway applications - Fixed installations - D.C. switchgear - Part 7-2: Measurement, control and protection devices for specific use in d.c. traction systems - Isolating current transducers and other current measuring devices |
| UNI EN 16252 : 2013 | MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - HORIZONTAL BALING PRESSES - SAFETY REQUIREMENTS |
| NF EN 50088 : 96 AMD 4 2006 | SAFETY OF ELECTRIC TOYS |
| EN 50174-2 : 2009 AMD 2 2014 | INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 2: INSTALLATION PLANNING AND PRACTICES INSIDE BUILDINGS |
| BS EN 61008-1 : 2012 | RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITHOUT INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCCBS) - PART 1: GENERAL RULES (IEC 61008-1:2010, MODIFIED) |
| UNI EN 16486 : 2014 | MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS |
| UNI EN 16009 : 2011 | FLAMELESS EXPLOSION VENTING DEVICES |
| CEI 216-5/1 : 2002 | ELECTRICAL EQUIPMENT FOR THE DETECTION AND THE MEASUREMENT OF BURNING VAPOURS OR GASES OR TOXIC AND OF OXYGEN FOR CONTINUOUS OPERATION IN FIXED INSTALLATIONS IN NON-HAZARDOUS AREAS - PART 1:GENERAL REQUIREMENTS AND TEST METHODS FOR CONTROL BOARDS AND CONTROL AND SIGNALLING BOARDS |
| I.S. EN 61076-3-115:2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-115: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR PROTECTIVE HOUSINGS FOR USE WITH 8-WAY SHIELDED AND UNSHIELDED CONNECTORS FOR FREQUENCIES UP TO 600 MHZ FOR INDUSTRIAL ENVIRONMENTS INCORPORATING THE IEC 60603-7 SERIES INTERFACE - VARIANT 12 RELATED TO IEC 61076-3-106 - PUSH-PULL TYPE |
| EN 50588-4:2018 | Medium power transformers 50 Hz, with highest voltage for equipment not exceeding 36 kV - Part 4: Transformers with cable boxes on the high-voltage and/or low-voltage side - Cable boxes type 2 for use on transformers meeting the requirements of EN 50588-2 |
| I.S. EN 61535:2009 | INSTALLATION COUPLERS INTENDED FOR PERMANENT CONNECTION IN FIXED INSTALLATIONS (IEC 61535:2009 (EQV)) |
| EN 61242:1997/A13:2017 | ELECTRICAL ACCESSORIES - CABLE REELS FOR HOUSEHOLD AND SIMILAR PURPOSES |
| BS EN 60044-8:2002 | Instrument transformers Electronic current transformers |
| PREN 81-72 : DRAFT 2013 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PARTICULAR APPLICATIONS FOR PASSENGER AND GOODS PASSENGER LIFTS - PART 72: FIREFIGHTERS LIFTS |
| PREN 1870-6 : DRAFT 2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 6: CIRCULAR SAWING MACHINES FOR FIREWOOD AND DUAL PURPOSE CIRCULAR SAWING MACHINES FOR FIREWOOD/CIRCULAR SAW BENCHES, WITH MANUAL LOADING AND/OR UNLOADING |
| UNI EN 15165 : 2014 | FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| UNE-EN 15420:2012 | Gas-fired central heating boilers - Type C boilers of nominal heat input exceeding 70 kW, but not exceeding 1 000 kW |
| DIN EN 12453:2005-05 (Draft) | INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY IN USE OF POWER OPERATED DOORS - REQUIREMENTS AND TEST METHODS |
| UNE-EN 13976-2:2011 | Rescue systems - Transportation of incubators - Part 2: System requirements |
| I.S. EN 50131-2-4:2008 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-4: REQUIREMENTS FOR COMBINED PASSIVE INFRARED AND MICROWAVE DETECTORS |
| BS EN 61243-3:2014 | Live working. Voltage detectors Two-pole low-voltage type |
| I.S. EN 61534-1:2011 | POWERTRACK SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 50411-3-5:2015 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-5: WALL OUTLET |
| I.S. EN 1459-2:2015 | ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SLEWING VARIABLE-REACH TRUCKS |
| I.S. EN 60335-2-47:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-47: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC BOILING PANS (IEC 60335-2-47:2002 (EQV)) |
| I.S. EN 50194-2:2006 | ELECTRICAL APPARATUS FOR THE DETECTION OF COMBUSTIBLE GASES IN DOMESTIC PREMISES - PART 2: ELECTRICAL APPARATUS FOR CONTINUOUS OPERATION IN A FIXED INSTALLATION IN RECREATIONAL VEHICLES AND SIMILAR PREMISES - ADDITIONAL TEST METHODS AND PERFORMANCE REQUIREMENTS |
| BS EN 50123-1:2003 | Railway applications. Fixed installations. D.C. switchgear General |
| I.S. EN 50122-1:2011 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRICAL SAFETY, EARTHING AND THE RETURN CIRCUIT - PART 1: PROTECTIVE PROVISIONS AGAINST ELECTRIC SHOCK |
| BS EN 60335-2-88:2002 | Specification for safety of household and similar electrical appliances. Particular requirements Particular requirements for humidifiers intended for use with heating, ventilation, or air-conditioning systems |
| CEI EN 50463-1 : 2013 | RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 1: GENERAL |
| I.S. EN 60335-2-28:2003/A11:2018 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-28: PARTICULAR REQUIREMENTS FOR SEWING MACHINES |
| I.S. EN 62534:2015 | RADIATION PROTECTION INSTRUMENTATION - HIGHLY SENSITIVE HAND-HELD INSTRUMENTS FOR NEUTRON DETECTION OF RADIOACTIVE MATERIAL |
| I.S. CLC TS 50131-3:2003 | ALARM SYSTEMS - INTRUSION SYSTEMS - PART 3: CONTROL AND INDICATING EQUIPMENT |
| I.S. EN 15180:2014 | FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 60335-2-39:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-39: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC MULTI-PURPOSE COOKING PANS |
| I.S. EN 50216-11:2008 | POWER TRANSFORMER AND REACTOR FITTINGS - PART 11: OIL AND WINDING TEMPERATURE INDICATORS |
| I.S. EN 62271-1:2017 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: COMMON SPECIFICATIONS FOR ALTERNATING CURRENT SWITCHGEAR AND CONTROLGEAR |
| S.R. HD 60364-7-730:2015 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-730: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - ONSHORE UNITS OF ELECTRICAL SHORE CONNECTIONS FOR INLAND NAVIGATION VESSELS |
| UNE-EN 50291-1:2011 | Electrical apparatus for the detection of carbon monoxide in domestic premises - Part 1: Test methods and performance requirements |
| UNE-EN 60079-29-1:2017 | Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases |
| I.S. EN 15164:2008 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR CHAIN- AND BELT-SLOTTING MACHINES |
| I.S. EN 50436-1:2014 | ALCOHOL INTERLOCKS - TEST METHODS AND PERFORMANCE REQUIREMENTS - PART 1: INSTRUMENTS FOR DRINK-DRIVING-OFFENDER PROGRAMS |
| I.S. EN 60335-2-82:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-82: PARTICULAR REQUIREMENTS FOR AMUSEMENT MACHINES AND PERSONAL SERVICE MACHINES |
| PREN 15433-6 : DRAFT 2016 | TRANSPORTATION LOADS - MEASUREMENT AND EVALUATION OF DYNAMIC MECHANICAL LOADS - PART 6: AUTOMATIC RECORDING SYSTEMS FOR MEASURING RANDOMLY OCCURRING SHOCK DURING MONITORING OF TRANSPORTS |
| CEI EN 62208 : 2012 | EMPTY ENCLOSURES FOR LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - GENERAL REQUIREMENTS |
| CEI EN 50066 : 1997 | MINI-COUPLERS FOR THE INTERCONNECTION OF ELECTRICAL MAINS SUPPLIED EQUIPMENT IN ROAD VEHICLES |
| EN 50470-1:2006 | Electricity metering equipment (a.c.) - Part 1: General requirements, tests and test conditions - Metering equipment (class indexes A, B and C) |
| CEI EN 50216-1 : 2002 | POWER TRANSFORMER AND REACTOR FITTINGS - PART 1: GENERAL |
| I.S. EN 50262:1999 | METRIC CABLE GLANDS FOR ELECTRICAL INSTALLATIONS |
| BS EN 50436-1:2014 | Alcohol interlocks. Test methods and performance requirements Instruments for drink-driving-offender programs |
| I.S. EN 60974-6:2016 | ARC WELDING EQUIPMENT - PART 6: LIMITED DUTY EQUIPMENT |
| UNE-EN 15267-4:2018 | Air quality - Certification of automated measuring systems - Part 4: Performance criteria and test procedures for automated measuring systems for periodic measurements of emissions from stationary sources |
| I.S. EN 62013-1:2006 | CAPLIGHTS FOR USE IN MINES SUSCEPTIBLE TO FIREDAMP - PART 1: GENERAL REQUIREMENTS - CONSTRUCTION AND TESTING IN RELATION TO THE RISK OF EXPLOSION |
| I.S. EN 50131-4:2009 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 4: WARNING DEVICES |
| I.S. EN 61754-24-21:2009 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 24-21: TYPE SC-RJ CONNECTORS WITH PROTECTIVE HOUSINGS BASED ON IEC 61076-3-106, VARIANT 06 |
| I.S. EN 15746-2:2010 | RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| I.S. EN 50156-1:2015 | ELECTRICAL EQUIPMENT FOR FURNACES AND ANCILLARY EQUIPMENT - PART 1: REQUIREMENTS FOR APPLICATION DESIGN AND INSTALLATION |
| I.S. EN 16340:2014 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - COMBUSTION PRODUCT SENSING DEVICES |
| I.S. EN 62282-3-1:2007 | FUEL CELL TECHNOLOGIES - PART 3-1: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY |
| I.S. EN 60335-2-81:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR FOOT WARMERS AND HEATING MATS (IEC 60335 -2-81:2002 (EQV)) |
| I.S. EN 16704-2-1:2016 | RAILWAY APPLICATIONS - TRACK - SAFETY PROTECTION ON THE TRACK DURING WORK - PART 2-1: COMMON SOLUTIONS AND TECHNOLOGIES - TECHNICAL REQUIREMENTS FOR TRACK WARNING SYSTEMS (TWS) |
| UNI EN 15268 : 2009 | PETROL FILLING STATIONS - SAFETY REQUIREMENTS FOR THE CONSTRUCTION OF SUBMERSIBLE PUMP ASSEMBLIES |
| I.S. EN 62310-1:2005 | STATIC TRANSFER SYSTEMS (STS) - PART 1: GENERAL AND SAFETY REQUIREMENTS |
| I.S. EN 61587-4:2012 | MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND IEC 60297 SERIES - PART 4: COMBINATION OF PERFORMANCE LEVELS FOR MODULAR CABINETS (IEC 61587-4:2012 (EQV)) |
| BS EN 62327:2011 | Radiation protection instrumentation. Hand-held instruments for the detection and identification of radionuclides and for the indication of ambient dose equivalent rate from photon radiation |
| BS EN 15194:2017 | Cycles. Electrically power assisted cycles. EPAC Bicycles |
| I.S. EN 50164-3:2006 | LIGHTNING PROTECTION COMPONENTS (LPC) - PART 3: REQUIREMENTS FOR ISOLATING SPARK GAPS |
| BS EN 60669-1 : 2000 | SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED-ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 54-23:2010 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 23: FIRE ALARM DEVICES - VISUAL ALARM DEVICES |
| BS EN 61386-1:2008 | Conduit systems for cable management General requirements |
| I.S. EN 60335-2-74:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-74: PARTICULAR REQUIREMENTS FOR PORTABLE IMMERSION HEATERS |
| BS EN 62052-21 : 2004 | ELECTRICITY METERING EQUIPMENT (A.C.) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 21: TARIFF AND LOAD CONTROL EQUIPMENT (IEC 62052-21:2004) |
| CEI EN 60068-2-68 : 1997 | ENVIRONMENTAL TESTING - PART 2: TESTS - TEST L: DUST AND SAND |
| I.S. EN 50539-11:2013 | LOW-VOLTAGE SURGE PROTECTIVE DEVICES - SURGE PROTECTIVE DEVICES FOR SPECIFIC APPLICATION INCLUDING D.C. - PART 11: REQUIREMENTS AND TESTS FOR SPDS IN PHOTOVOLTAIC APPLICATIONS |
| I.S. EN 62271-202:2014 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 202: HIGH-VOLTAGE/LOW-VOLTAGE PREFABRICATED SUBSTATION |
| BS EN 15061 : 2007 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT |
| I.S. EN 50131-2-7-3:2012 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-3: INTRUSION DETECTORS - GLASS BREAK DETECTORS (ACTIVE) |
| I.S. EN 50325-1:2002 | INDUSTRIAL COMMUNICATIONS SUBSYSTEM BASED ON ISO 11898 (CAN) FOR CONTROLLER-DEVICE INTERFACES - PART 1: GENERAL REQUIREMENTS |
| 17/30353516 DC : 0 | BS EN 15597-1 - WINTER MAINTENANCE EQUIPMENT - SPREADING MACHINES (GRITTING MACHINES) - PART 1: GENERAL REQUIREMENTS AND DEFINITIONS FOR SPREADING MACHINES |
| I.S. EN 15955-2:2013 | RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| EN 50463-1:2017 | Railway applications - Energy measurement on board trains - Part 1: General |
| I.S. EN 12453:2017 | INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY IN USE OF POWER OPERATED DOORS - REQUIREMENTS AND TEST METHODS |
| BS EN 50019:2000 | Electrical apparatus for potentially explosive atmospheres. Increased safety \'e\' |
| I.S. HD 60269-3-1:2004 | LOW-VOLTAGE FUSES - PART 3-1: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY UNSKILLED PERSONS (FUSES MAINLY FOR HOUSEHOLD AND SIMILAR APPLICATIONS) - SECTIONS 1 TO 4: EXAMPLES OF TYPES OF STANDARDIZED FUSES |
| I.S. EN 60335-2-9:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-9: PARTICULAR REQUIREMENTS FOR GRILLS, TOASTERS AND SIMILAR PORTABLE COOKING APPLIANCES (IEC 60335-2-9:2002 (MOD)) |
| I.S. EN 60079-15:2010 | EXPLOSIVE ATMOSPHERES - PART 15: EQUIPMENT PROTECTION BY TYPE OF PROTECTION 'N' |
| BS EN 62196-1:2014 | Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles General requirements |
| I.S. HD 639:2002 | ELECTRICAL ACCESSORIES - PORTABLE RESIDUAL CURRENT DEVICES WITHOUT INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USE (PRCDS) |
| UNE-EN 16327:2015 | Fire-fighting - Positive-pressure proportioning systems (PPPS) and compressed-air foam systems (CAFS) |
| I.S. EN 62689-1:2016 | CURRENT AND VOLTAGE SENSORS OR DETECTORS, TO BE USED FOR FAULT PASSAGE INDICATION PURPOSES - PART 1: GENERAL PRINCIPLES AND REQUIREMENTS |
| EN 50124-1:2017 | Railway applications - Insulation coordination - Part 1: Basic requirements - Clearances and creepage distances for all electrical and electronic equipment |
| 15/30310795 DC : 0 | BS EN WI 16925 - FIXED FIREFIGHTING SYSTEMS - AUTOMATIC RESIDENTIAL SPRINKLER SYSTEMS - DESIGN, INSTALLATION AND MAINTENANCE |
| EN 61386-22 : 2004 AMD 11 2010 | CONDUIT SYSTEMS FOR CABLE MANAGEMENT - PART 22: PARTICULAR REQUIREMENTS - PLIABLE CONDUIT SYSTEMS |
| I.S. EN 60320-2-3:1999 | APPLIANCE COUPLER FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES - APPLIANCE COUPLER WITH A DEGREE OF PROTECTION HIGHER THAN IPXO |
| PREN 14471 : DRAFT 2011 | CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS |
| PREN 12041 : DRAFT 2011 | FOOD PROCESSING MACHINERY - MOULDERS - SAFETY AND HYGIENE REQUIREMENTS |
| PREN 1974 : DRAFT 2016 | FOOD PROCESSING MACHINERY - SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| CEI EN 50174-3 : 2014 | INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS |
| I.S. EN 50548:2011 | JUNCTION BOXES FOR PHOTOVOLTAIC MODULES |
| CEI R069-001 : 2004 | AC CONNECTION DEVICES FOR ELECTRIC VEHICLE CONDUCTIVE CHARGING |
| CEI EN 62271-201 : 2015 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 201: AC SOLID-INSULATION ENCLOSED SWITCHGEAR AND CONTROLGEAR FOR RATED VOLTAGES ABOVE 1 KV AND UP TO AND INCLUDING 52 KV |
| CEI EN 50131-2-4 : 2008 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-4: REQUIREMENTS FOR COMBINED PASSIVE INFRARED AND MICROWAVE DETECTORS |
| I.S. EN IEC 62485-2:2018 | SAFETY REQUIREMENTS FOR SECONDARY BATTERIES AND BATTERY INSTALLATIONS - PART 2: STATIONARY BATTERIES |
| I.S. EN 62683:2015 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PRODUCT DATA AND PROPERTIES FOR INFORMATION EXCHANGE |
| CEI EN 50343 : 2015 | RAILWAY APPLICATIONS - ROLLING STOCK - RULES FOR INSTALLATION OF CABLING |
| DIN EN 81-40:2009-04 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 40: STAIRLIFTS AND INCLINED LIFTING PLATFORMS INTENDED FOR PERSONS WITH IMPAIRED MOBILITY |
| BS EN 50194-2 : 2006 | ELECTRICAL APPARATUS FOR THE DETECTION OF COMBUSTIBLE GASES IN DOMESTIC PREMISES - PART 2: ELECTRICAL APPARATUS FOR CONTINUOUS OPERATION IN A FIXED INSTALLATION IN RECREATIONAL VEHICLES AND SIMILAR PREMISES - ADDITIONAL TEST METHODS AND PERFORMANCE REQUIREMENTS |
| S.R. HD 60364-7-712:2016 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-712: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - PHOTOVOLTAIC (PV) SYSTEMS |
| EN 12042 : 2014 COR 2014 | FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS |
| PREN 12601 : DRAFT 2010 | RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN GENERATING SETS - SAFETY |
| PREN 13160-6 : DRAFT 2014 | LEAK DETECTION SYSTEMS - PART 6: SENSORS IN MONITORING WELLS |
| S.R. CEN/TS 45545-4:2009 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 4: FIRE SAFETY REQUIREMENTS FOR RAILWAY ROLLING STOCK DESIGN |
| I.S. HD 60364-7-721:2009 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-721: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - ELECTRICAL INSTALLATIONS IN CARAVANS AND MOTOR CARAVANS |
| I.S. EN 13616-1:2016 | OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID FUELS -PART 1: OVERFILL PREVENTION DEVICES WITH CLOSURE DEVICE |
| EN 60335-2-74:2003/A2:2009 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-74: PARTICULAR REQUIREMENTS FOR PORTABLE IMMERSION HEATERS |
| NF EN 15859 : 2010 | AIR QUALITY - CERTIFICATION OF AUTOMATED DUST ARRESTMENT PLANT MONITORS FOR USE ON STATIONARY SOURCES - PERFORMANCE CRITERIA AND TEST PROCEDURES |
| NF EN 50191 : 2011 | ERECTION AND OPERATION OF ELECTRICAL TEST EQUIPMENT |
| I.S. EN 61754-20-100:2012 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 20-100: INTERFACE STANDARD FOR LC CONNECTORS WITH PROTECTIVE HOUSINGS RELATED TO IEC 61076-3-106 (IEC 61754-20-100:2012 (EQV)) |
| CEI UNI EN 50194-1 : 2012 | ELECTRICAL APPARATUS FOR THE DETECTION OF COMBUSTIBLE GASES IN DOMESTIC PREMISES - PART 1: TEST METHODS AND PERFORMANCE REQUIREMENTS |
| I.S. EN 61753-1:2007 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 1: GENERAL AND GUIDANCE FOR PERFORMANCE STANDARDS |
| DIN EN 12042:2014-07 | FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 14829:2007 | INDEPENDENT GAS-FIRED FLUELESS SPACE HEATERS FOR NOMINAL HEAT INPUT NOT EXCEEDING 6 KW |
| I.S. EN 50177:2009 | STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE COATING POWDERS - SAFETY REQUIREMENTS |
| S.R. CLC/TS 50535:2010 | RAILWAY APPLICATIONS - ONBOARD AUXILIARY POWER CONVERTER SYSTEMS |
| UNE-EN 15861:2013 | Food processing machinery - Smokehouses - Safety and hygiene requirements |
| UNI EN 15949 : 2012 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR BAR MILLS, STRUCTURAL STEEL MILLS AND WIRE ROD MILLS |
| I.S. EN 15220-1:2008 | RAILWAY APPLICATIONS - BRAKE INDICATORS - PART 1: PNEUMATICALLY OPERATED BRAKE INDICATORS |
| 17/30360051 DC : 0 | BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| I.S. EN 62026-7:2013 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 7: COMPONET (IEC 62026-7:2010 (MOD)) |
| UNI EN 12042 : 2014 | FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 60974-8:2009 | ARC WELDING EQUIPMENT - PART 8: GAS CONSOLES FOR WELDING AND PLASMA CUTTING SYSTEMS |
| I.S. EN 62718:2016 | RAILWAY APPLICATIONS - ROLLING STOCK - DC SUPPLIED ELECTRONIC BALLASTS FOR LIGHTING FLUORESCENT LAMPS |
| PREN 12182 : 2009-06 | ASSISTIVE PRODUCTS FOR PERSONS WITH DISABILITY - GENERAL REQUIREMENTS AND TEST METHODS |
| I.S. EN 50311:2003 | RAILWAY APPLICATIONS - ROLLING STOCK - D.C. SUPPLIED ELECTRONIC BALLASTS FOR LIGHTING FLUORESCENT LAMPS |
| PREN 54-2 : DRAFT 2016 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 2: CONTROL AND INDICATING EQUIPMENT |
| DIN EN 15869-3:2010-06 | INLAND NAVIGATION VESSELS - ELECTRICAL SHORE CONNECTION, THREE PHASE CURRENT 400 V, UP TO 63 A, 50 HZ - PART 3: ON-BOARD UNIT, SAFETY REQUIREMENTS |
| PREN 50465 : DRAFT 2011 | GAS APPLIANCES - COMBINED HEAT AND POWER APPLIANCE OF NOMINAL HEAT INPUT INFERIOR OR EQUAL TO 70 KW |
| UNE-EN 62080:2010 | Sound signalling devices for household and similar purposes |
| NF EN 50291-1 : 2010 AMD 1 2012 | ELECTRICAL APPARATUS FOR THE DETECTION OF CARBON MONOXIDE IN DOMESTIC PREMISES - PART 1: TEST METHODS AND PERFORMANCE REQUIREMENTS |
| CLC/TR 50488:2006 | Railway applications - Safety measures for the personnel working on or near overhead contact lines |
| I.S. EN 15500:2008 | CONTROL FOR HEATING, VENTILATING AND AIR-CONDITIONING APPLICATIONS - ELECTRONIC INDIVIDUAL ZONE CONTROL EQUIPMENT |
| EN 50588-3:2018 | Medium power transformers 50 Hz, with highest voltage for equipment not exceeding 36 kV - Part 3: Transformers with cable boxes on the high-voltage and/or low-voltage side - Cable boxes type 1 for use on transformers meeting the requirements of EN 50588-2 |
| I.S. EN 61076-2-105:2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-105: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR M5 CONNECTORS WITH SCREW-LOCKING |
| VDE 0623-100 : 2000-09 | INDUSTRIAL CABLE REELS |
| NF EN 61851-22 : 2002 | ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 22: A.C. ELECTRIC VEHICLE CHARGING STATION |
| BS EN 474-1:2006+A6:2019 | Earth-moving machinery. Safety General requirements |
| UNE-EN 50299-2:2015 | Oil-immersed cable connection assemblies for transformers and reactors having highest voltage for equipment Um from 72,5 kV to 550 kV - Part 2: Dry-type cable terminations |
| CEI EN 62196-1 : 2015 | PLUGS, SOCKET-OUTLETS, VEHICLE CONNECTORS AND VEHICLE INLETS - CONDUCTIVE CHARGING OF ELECTRIC VEHICLES - PART 1: GENERAL REQUIREMENTS |
| UNI EN 81-43 : 2009 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 43: LIFTS FOR CRANES |
| CLC/TS 50131-2-7-1:2009 | Alarm systems - Intrusion and hold-up systems - Part 2-7-1: Intrusion detectors - Glass break detectors (acoustic) |
| CEI EN 60079-15 : 2012 | EXPLOSIVE ATMOSPHERES - PART 15: EQUIPMENT PROTECTION BY TYPE OF PROTECTION 'N' |
| EN 61386-23:2004/A11:2010 | CONDUIT SYSTEMS FOR CABLE MANAGEMENT - PART 23: PARTICULAR REQUIREMENTS - FLEXIBLE CONDUIT SYSTEMS |
| CEI EN 62444 : 2014 | CABLE GLANDS FOR ELECTRICAL INSTALLATIONS |
| EN 81-22:2014 | Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 22: Electric lifts with inclined path |
| NF EN 50017 : 1999 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - POWDER FILLING 'Q' |
| UNI EN 15774 : 2011 | FOOD PROCESSING MACHINERY - MACHINES FOR PROCESSING FRESH AND FILLED PASTA (TAGLIATELLE, CANNELLONI, RAVIOLI, TORTELLINI, ORECCHIETTE AND GNOCCHI) - SAFETY AND HYGIENE REQUIREMENTS |
| PREN 289 : DRAFT 2012 | PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS |
| I.S. EN 60146-1-1:2010 | SEMICONDUCTOR CONVERTERS - GENERAL REQUIREMENTS AND LINE COMMUTATED CONVERTERS - PART 1-1: SPECIFICATION OF BASIC REQUIREMENTS |
| EN 12453 : 2017 COR 2017 | INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY IN USE OF POWER OPERATED DOORS - REQUIREMENTS AND TEST METHODS |
| BS EN 60335-2-12 : 2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-12: PARTICULAR REQUIREMENTS FOR WARMING PLATES AND SIMILAR APPLIANCES |
| I.S. EN 50124-1:2017 | RAILWAY APPLICATIONS - INSULATION COORDINATION - PART 1: BASIC REQUIREMENTS - CLEARANCES AND CREEPAGE DISTANCES FOR ALL ELECTRICAL AND ELECTRONIC EQUIPMENT |
| UNI EN 12012-1 : 2008 | PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS |
| EN 81-71:2018 | Safety rules for the construction and installation of lifts - Particular applications to passenger lifts and goods passenger lifts - Part 71: Vandal resistant lifts |
| BS EN 12845:2015 | Fixed firefighting systems. Automatic sprinkler systems. Design, installation and maintenance |
| EN 14236:2007 | Ultrasonic domestic gas meters |
| I.S. EN 60204-32:2008 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 32: REQUIREMENTS FOR HOISTING MACHINES |
| I.S. EN 50134-3:2012 | ALARM SYSTEMS - SOCIAL ALARM SYSTEMS - PART 3: LOCAL UNIT AND CONTROLLER |
| UNI EN 81-20 : 2014 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 20: PASSENGER AND GOODS PASSENGER LIFTS |
| I.S. EN 50123-7-2:2003 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SWITCHGEAR - PART 7-2: MEASUREMENT, CONTROL AND PROTECTION DEVICES FOR SPECIFIC USE IN D.C. TRACTION SYSTEMS - ISOLATING CURRENT TRANSDUCERS AND OTHER CURRENT MEASURING DEVICES |
| I.S. EN 62040-1-2:2004 | |
| I.S. EN 50465:2015 | GAS APPLIANCES - COMBINED HEAT AND POWER APPLIANCE OF NOMINAL HEAT INPUT INFERIOR OR EQUAL TO 70 KW |
| I.S. EN 60335-2-48:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-48: PARTICULAR REQUIREMENTS FOR COMMERCIAL GRILLERS AND TOASTERS (IEC 60335-2-48:2002 (EQV)) |
| NF EN 1501-2 : 2005 + A1 2010 | REFUSE COLLECTION VEHICLES AND ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 2: SIDE LOADED REFUSE COLLECTION VEHICLES |
| I.S. HD 601:1996 | TEST PROBES TO VERIFY PROTECTION BY ENCLOSURES |
| I.S. EN 50020:2002 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - INTRINSIC SAFETY "I" |
| EN 60335-2-9:2003/A13:2010/AC:2012 | Household and similar electrical appliances - Safety - Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances |
| S.R. CEN/TR 12101-4:2009 | SMOKE AND HEAT CONTROL SYSTEMS - PART 4: INSTALLED SHEVS SYSTEMS FOR SMOKE AND HEAT VENTILATION |
| I.S. EN 61800-5-1:2007 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 5-1: SAFETY REQUIREMENTS - ELECTRICAL, THERMAL AND ENERGY |
| NF EN 1673 : 2000 + A1 2010 | FOOD PROCESSING MACHINERY - ROTARY RACK OVENS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 50119:2009 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES |
| I.S. EN 15268:2008 | PETROL FILLING STATIONS - SAFETY REQUIREMENTS FOR THE CONSTRUCTION OF SUBMERSIBLE PUMP ASSEMBLIES |
| I.S. EN 62040-1:2008 | UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 1: GENERAL AND SAFETY REQUIREMENTS FOR UPS (IEC 62040-1:2008 (EQV)) |
| DIN EN 1837:2009-12 | Safety of machinery - Integral lighting of machines (includes Amendment A1:2009) |
| EN 62026-3:2015 | Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 3: DeviceNet |
| I.S. EN 14960:2013 | INFLATABLE PLAY EQUIPMENT - SAFETY REQUIREMENTS AND TEST METHODS |
| S.R. CLC/TS 50457-1:2008 | CONDUCTIVE CHARGING FOR ELECTRIC VEHICLES - PART 1: D.C. CHARGING STATION |
| I.S. EN 14492-2:2006 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| EN 267:2009+A1:2011 | Automatic forced draught burners for liquid fuels |
| UNE-EN 54-3:2016 | Fire detection and fire alarm systems - Part 3: Fire alarm devices - Sounders |
| DIN EN 1010-1:2011-06 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements (includes Amendment A1:2010) |
| DIN EN 1398:2009-07 | DOCK LEVELLERS - SAFETY REQUIREMENTS |
| DIN EN 12215:2010-06 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS |
| DIN EN 1678:2011-02 | Food processing machinery - Vegetable cutting machines - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN 12899-1:2008-02 | FIXED VERTICAL ROAD TRAFFIC SIGNS - PART 1: FIXED SIGNS |
| DIN EN 12267:2011-02 | Food processing machinery - Circular saw machines - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN 1012-2:2011-12 | Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps |
| DIN EN 12645:2015-02 | Tyre pressure measuring instruments - Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles - Metrology, requirements and testing |
| DIN EN 12268:2015-01 | FOOD PROCESSING MACHINERY - BAND SAW MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN 1777:2010-06 | Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing |
| DIN EN 1034-22:2010-06 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 22: Wood grinders (includes Amendment A1:2009) |
| DIN EN 13114:2010-03 | Tannery machines - Rotating process vessels - Safety requirements (includes Amendment A1:2009) |
| DIN EN 1807:2010-02 | SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES |
| DIN EN 13128:2009-09 | SAFETY OF MACHINE TOOLS - MILLING MACHINES (INCLUDING BORING MACHINES) |
| DIN EN 1493:2011-02 | Vehicle lifts |
| DIN EN 12621:2011-07 | Machinery for the supply and circulation of coating materials under pressure - Safety requirements (includes Amendment A1:2010) |
| DIN EN 1870-14:2012-06 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 14: VERTICAL PANEL SAWING MACHINES |
| DIN EN 12957:2009-07 | MACHINE TOOLS - SAFETY - ELECTRO DISCHARGE MACHINES |
| DIN EN 12182:2012-07 | Assistive products for persons with disability - General requirements and test methods |
| DIN EN 1674:2015-12 | FOOD PROCESSING MACHINERY - DOUGH SHEETERS - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN 1020:2010-05 | NON-DOMESTIC FORCED CONVECTION GAS-FIRED AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW INCORPORATING A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR OR COMBUSTION PRODUCTS |
| DIN EN 13112:2011-03 | Tannery machines - Splitting and bandknife shearing machines - Safety requirements (includes Amendment A1:2009) |
| DIN EN 12984:2011-02 | Food processing machinery - Portable and/or hand-guided machines and appliances with mechanically driven cutting tools - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN 12463:2015-02 | Food processing machinery - Filling machines and auxiliary machines - Safety and hygiene requirements |
| DIN EN 12301:2015-12 (Draft) | PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS |
| DIN EN 12331:2015-12 | Food processing machinery - Mincing machines - Safety and hygiene requirements |
| DIN EN 12855:2011-02 | Food processing machinery - Rotating bowl cutters - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN 1319:2010-06 | DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING, WITH FAN-ASSISTED BURNERS NOT EXCEEDING A NET HEAT INPUT OF 70 KW |
| DIN EN 1643:2014-09 | Safety and control devices for gas burners and gas burning appliances - Valve proving systems for automatic shut-off valves |
| DIN EN 12581:2011-02 | Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements (includes Amendment A1:2010) |
| DIN EN 12417:2009-07 | MACHINE TOOLS - SAFETY - MACHINING CENTRES |
| DIN EN 12981:2010-06 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS |
| DIN EN 1870-13:2013-07 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES |
| DIN EN 12418:2010-03 | Masonry and stone cutting-off machines for job site - Safety (includes Amendment A1:2009) |
| DIN EN 1974:2016-06 (Draft) | Food processing machinery - Slicing machines - Safety and hygiene requirements; German and English version prEN 1974:2016 |
| DIN EN 12184:2014-06 | Electrically powered wheelchairs, scooters and their chargers - Requirements and test methods |
| DIN EN 1870-10:2013-07 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES |
| DIN EN 1870-8:2013-03 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 8: SINGLE BLADE EDGING CIRCULAR RIP SAWING MACHINES WITH POWER DRIVEN SAW UNIT AND MANUAL LOADING AND/OR UNLOADING |
| DIN EN 1218-1:2010-02 | Safety of woodworking machines - Tenoning machines - Part 1: Single end tenoning machines with sliding table (includes Amendment A1:2009) |
| DIN EN 13352:2012-06 | Specification for the performance of automatic tank contents gauges |
| DIN EN 13617-1:2012-08 | Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units |
| DIN EN 15267-3:2008-03 | Air quality - Certification of automated measuring systems - Part 3: Performance criteria and test procedures for automated measuring systems for monitoring emissions from stationary sources |
| DIN EN 14010:2009-12 | Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages (includes Amendment A1:2009) |
| DIN EN 267:2012-03 (Draft) | AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS |
| DIN EN 12159:2013-03 | Builders hoists for persons and materials with vertically guided cages |
| DIN EN 909:2009-12 | Agricultural and forestry machinery - Centre pivot and moving lateral types irrigation machines - Safety (includes Amendment A1:2009) |
| DIN EN 14466:2008-09 | Fire-fighting pumps - Portable pumps - Safety and performance requirements, tests (includes Amendment A1:2008) |
| DIN EN 12041:2015-02 | FOOD PROCESSING MACHINERY - MOULDERS - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN 536:2016-01 | ROAD CONSTRUCTION MACHINES - MIXING PLANTS FOR ROAD CONSTRUCTION MATERIALS - SAFETY REQUIREMENTS |
| DIN EN 267:2011-11 | Automatic forced draught burners for liquid fuels |
| DIN EN 14268:2005-11 | IRRIGATION TECHNIQUES - METERS FOR IRRIGATION WATER |
| DIN EN 14597:2015-02 | TEMPERATURE CONTROL DEVICES AND TEMPERATURE LIMITERS FOR HEAT GENERATING SYSTEMS |
| DIN EN 15270:2008-03 | Pellet burners for small heating boilers - Definitions, requirements, testing, marking |
| DIN EN 14471:2015-03 | CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS |
| DIN EN 14744:2006-01 | Inland navigation vessels and sea-going vessels - Navigation light; German version EN 14744:2005 |
| DIN EN 12110:2014-10 | TUNNELLING MACHINES - AIR LOCKS - SAFETY REQUIREMENTS |
| DIN EN 12043:2015-02 | FOOD PROCESSING MACHINERY - INTERMEDIATE PROVERS - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN 13035-9:2010-07 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 9: Washing installations (includes Amendment A1:2010) |
| DIN EN 14655:2010-11 | Food processing machinery - Baguette slicers - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN 12044:2010-03 | Footwear, leather and imitation leather goods manufacturing machines - Cutting and punching machines - Safety requirements (includes Amendment A1:2009) |
| DIN EN 14236:2008-06 | ULTRASONIC DOMESTIC GAS METERS |
| UNI EN 81-22 : 2014 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 22: ELECTRIC LIFTS WITH INCLINED PATH |
| BS EN 1501-2 : 2005 | REFUSE COLLECTION VEHICLES AND ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 2: SIDE LOADED REFUSE COLLECTION VEHICLES |
| UNE-EN 50216-12:2011 | Power transformer and reactor fittings - Part 12: Fans |
| BS EN 1870-2:1999 | Safety of woodworking machines. Circular sawing machines Horizontal beam panel saws and vertical panel saws |
| BS EN 297:1994 | Gas-fired central heating boilers. Type B<sub>11</sub> and B<sub>11BS</sub> boilers fitted with atmospheric burners of nominal heat input not exceeding 70 kW |
| BS EN 13570 : 2005 | FOOD PROCESSING MACHINERY - MIXING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| UNE-EN 289:2014 | Plastics and rubber machines - Compression moulding machines and transfer moulding machines - Safety requirements |
| BS EN 12215 : 2004 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS |
| BS EN 12981 : 2005 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS |
| BS EN 1870-7:2012 | Safety of woodworking machines. Circular sawing machines Single blade log sawing machines with integrated feed table and manual loading and/or unloading |
| BS EN 62108:2016 | Concentrator photovoltaic (CPV) modules and assemblies. Design qualification and type approval |
| BS EN 940 : 2009 | SAFETY OF WOODWORKING MACHINES - COMBINED WOODWORKING MACHINES |
| BS EN 26:1998 | Gas fired instantaneous water heaters for the production of domestic hot water, fitted with atmospheric burners |
| UNE-EN 1458-1:2012 | Domestic direct gas-fired tumble dryers of types B22D and B23D, of nominal heat input not exceeding 6 kW - Part 1: Safety |
| UNE-EN 1034-3:2012 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 3: Rereelers and winders |
| BS EN 1175-1 : 1998 | SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL REQUIREMENTS - PART 1: GENERAL REQUIREMENTS FOR BATTERY POWERED TRUCKS |
| BS EN 13355 : 2004 | COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS |
| BS EN 1034-14 : 2005 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 14: REEL SPLITTER |
| UNE-EN 62196-1:2015 | Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements |
| BS EN 12757-1 : 2005 | MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING |
| UNE-EN 62271-200:2012 | High-voltage switchgear and controlgear - Part 200: AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV |
| UNE-EN 1870-10:2013 | Safety of woodworking machines - Circular sawing machines - Part 10: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines |
| BS EN 1760-3 : 2004 | SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES |
| BS EN 1175-3 : 1998 | SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL REQUIREMENTS - PART 3: SPECIFIC REQUIREMENTS FOR THE ELECTRIC POWER TRANSMISSION SYSTEMS OF INTERNAL COMBUSTION ENGINE POWERED TRUCKS |
| BS EN 13379 : 2001 | PASTA PROCESSING PLANTS - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR, STICK MAGAZINE - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 61131-2:2007 | Programmable controllers Equipment requirements and tests |
| BS EN 14595:2005 | Tanks for transport of dangerous goods. Service equipment for tanks. Pressure and vacuum breather vent |
| BS EN 12368:2015 | Traffic control equipment. Signal heads |
| UNE-EN 1493:2011 | Vehicle lifts |
| UNE-EN 1374:2001 | Agricultural machinery. Silos stationary unloaders for round silos. Safety. |
| BS EN 15095 : 2007 | POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS |
| BS EN 12043:2014 | Food processing machinery. Intermediate provers. Safety and hygiene requirements |
| EN 62282-3-100:2012 | Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety |
| BS EN 60519-2:2006 | Safety in electroheat installations Particular requirements for resistance heating equipment |
| BS EN 746-2:2010 | Industrial thermoprocessing equipment Safety requirements for combustion and fuel handling systems |
| BS EN 1473:2016 | Installation and equipment for liquefied natural gas. Design of onshore installations |
| UNE-EN 1777:2011 | Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing |
| BS EN 13534 : 2006 | FOOD PROCESSING MACHINERY - CURING INJECTION MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 620 : 2002 | |
| BS EN 81-80:2003 | Safety rules for the construction and installation of lifts. Existing lifts Rules for the improvement of safety of existing passenger and goods passenger lifts |
| UNE-EN 12547:2015 | Centrifuges - Common safety requirements |
| BS EN 12601:2010 | Reciprocating internal combustion engine driven generating sets. Safety |
| UNE-EN 81-20:2017 | Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 20: Passenger and goods passenger lifts |
| UNE-EN 13418:2013 | Plastics and rubber machines - Winding machines for film or sheet - Safety requirements |
| EN 16486:2014 | Machines for compacting waste materials or recyclable fractions - Compactors - Safety requirements |
| EN 50131-2-4:2008 | Alarm systems - Intrusion and hold-up systems - Part 2-4: Requirements for combined passive infrared and microwave detectors |
| UNE-EN 15869-2:2011 | Inland navigation vessels - Electrical shore connection, three phase current 400 V, up to 63 A, 50 Hz - Part 2: Onshore unit, safety requirements |
| EN 60065:2014/AC:2017-01 | AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS (IEC 60065:2014/COR2:2016) |
| I.S. EN 12215:2004 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS |
| I.S. EN 50155:2017-11 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRONIC EQUIPMENT |
| I.S. EN 619:2002 | |
| I.S. EN 12418:2000 | MASONRY AND STONE CUTTING-OFF MACHINES FOR JOB SITE - SAFETY |
| I.S. EN 12158-1:2000 | BUILDERS' HOISTS FOR GOODS - PART 1: HOISTS WITH ACCESSIBLE PLATFORMS |
| I.S. EN 1034-2:2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 2: BARKING DRUMS |
| I.S. EN 12717:2001 | SAFETY OF MACHINE TOOLS - DRILLING MACHINES |
| I.S. EN 1870-8:2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 8: SINGLE BLADE EDGING CIRCULAR RIP SAWING MACHINES WITH POWER DRIVEN SAW UNIT AND MANUAL LOADING AND/OR UNLOADING |
| I.S. EN 14471:2013 | CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS |
| DIN EN 1915-1:2001-06 | AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 1: BASIC SAFETY REQUIREMENTS |
| I.S. EN 13862:2002 | FLOOR CUTTING-OFF MACHINES - SAFETY |
| I.S. EN 13278:2013 | OPEN FRONTED GAS-FIRED INDEPENDENT SPACE HEATERS |
| I.S. EN 13114:2002 | TANNERY MACHINES - ROTATING PROCESS VESSELS - SAFETY REQUIREMENTS |
| I.S. EN 14678-1:2013 | LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS |
| I.S. EN 289:2014 | PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS |
| DIN EN 1218-4:2009-12 | SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 4: EDGE BANDING MACHINES FED BY CHAIN(S) |
| I.S. EN 1854:2010 | PRESSURE SENSING DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES |
| I.S. EN 12368:2015 | TRAFFIC CONTROL EQUIPMENT - SIGNAL HEADS |
| I.S. EN 12244-1:1998 | DIRECT GAS-FIRED WASHING MACHINES, OF NOMINAL HEAT INPUT NOT EXCEEDING 20 KW - PART 1: SAFETY |
| I.S. EN 12184:2014 | ELECTRICALLY POWERED WHEELCHAIRS, SCOOTERS AND THEIR CHARGERS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 1864:2008 | INLAND NAVIGATION VESSELS - WHEELHOUSE - ERGONOMIC AND SAFETY REQUIREMENTS |
| I.S. EN 1248:2001 | FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR ABRASIVE BLASTING EQUIPMENT |
| EN 15746-2:2010+A1:2011 | Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements |
| DIN EN 1643:2001-02 | SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - VALVE PROVING SYSTEMS FOR AUTOMATIC SHUT-OFF VALVES |
| I.S. EN 12158-2:2000 | BUILDERS' HOISTS FOR GOODS - PART 2: INCLINED HOISTS WITH NON-ACCESSIBLE LOAD CARRYING DEVICES |
| DIN EN 12012-2:2010-02 | PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 2: SAFETY REQUIREMENTS FOR STRAND PELLETISERS |
| I.S. EN 13035-9:2006 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 9: WASHING INSTALLATIONS |
| I.S. EN 13954:2005 | FOOD PROCESSING MACHINERY - BREAD SLICERS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 12669:2000 | DIRECT GAS-FIRED HOT AIR BLOWERS FOR USE IN GREENHOUSES AND SUPPLEMENTARY NON-DOMESTIC SPACE HEATING |
| EN 1837:1999+A1:2009 | Safety of machinery - Integral lighting of machines |
| I.S. EN 161:2011 | AUTOMATIC SHUT-OFF VALVES FOR GAS BURNERS AND GAS APPLIANCES |
| I.S. EN 12416-1:2001 | FIXED FIREFIGHTING SYSTEMS - POWDER SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS |
| I.S. EN 415-6:2013 | SAFETY OF PACKAGING MACHINES - PART 6: PALLET WRAPPING MACHINES |
| I.S. EN 13160-6:2016 | LEAK DETECTION SYSTEMS - PART 6: SENSORS IN MONITORING WELLS |
| DIN EN 1755:2016-02 | Industrial Trucks - Safety requirements and verification - Supplementary requirements for operation in potentially explosive atmospheres |
| I.S. EN 1870-10:2013 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES |
| DIN EN 1473:1997-11 | INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS |
| DIN EN 1248:2010-06 | Foundry machinery - Safety requirements for abrasive blasting equipment (includes Amendment A1:2009) |
| I.S. EN 13379:2001 | PASTA PROCESSING PLANTS - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR, STICK MAGAZINE - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 12622:2009 | SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES |
| I.S. EN 13885:2005 | FOOD PROCESSING MACHINERY - CLIPPING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 13237:2012 | POTENTIALLY EXPLOSIVE ATMOSPHERES - TERMS AND DEFINITIONS FOR EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
| I.S. EN 13113:2002 | TANNERY MACHINES - ROLLER COATING MACHINES - SAFETY REQUIREMENTS |
| I.S. EN 1218-2:2004 | SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 2: DOUBLE END TENONING AND/OR PROFILING MACHINES FED BY CHAIN OR CHAINS |
| I.S. EN 1870-11:2013 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS) |
| I.S. EN 12757-1:2005 | MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING |
| I.S. EN 1808:2015 | SAFETY REQUIREMENTS FOR SUSPENDED ACCESS EQUIPMENT - DESIGN CALCULATIONS, STABILITY CRITERIA, CONSTRUCTION - EXAMINATIONS AND TESTS |
| I.S. EN 12855:2003 | FOOD PROCESSING MACHINERY - ROTATING BOWL CUTTERS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 1643:2014 | SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - VALVE PROVING SYSTEMS FOR AUTOMATIC SHUT-OFF VALVES |
| I.S. EN 14492-1:2006 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| I.S. EN 13288:2005 | FOOD PROCESSING MACHINERY - BOWL LIFTING AND TILTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 1673 : 2010 | FOOD PROCESSING MACHINERY - ROTARY RACK OVENS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 12267:2003 | FOOD PROCESSING MACHINERY - CIRCULAR SAW MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN 1987-1:1998-03 | ELECTRICALLY PROPELLED ROAD VEHICLES - SPECIFIC REQUIREMENTS FOR SAFETY - PART 1: ON-BOARD ENERGY STORAGE |
| I.S. EN 1028-1:2002 | FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITH PRIMER - PART 1: CLASSIFICATION - GENERAL AND SAFETY REQUIREMENTS |
| DIN EN 1570:2009-12 | SAFETY REQUIREMENTS FOR LIFTING TABLES |
| DIN EN 15869-2:2010-06 | INLAND NAVIGATION VESSELS - ELECTRICAL SHORE CONNECTION, THREE PHASE CURRENT 400 V, UP TO 63 A, 50 HZ - PART 2: ONSHORE UNIT, SAFETY REQUIREMENTS |
| I.S. EN 1870-12:2013 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 12: PENDULUM CROSS-CUT SAWING MACHINES |
| DIN EN 1218-3:2009-12 | SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 3: HAND FED TENONING MACHINES WITH SLIDING TABLE FOR CUTTING STRUCTURAL TIMBERS |
| I.S. EN 422:2009 | PLASTICS AND RUBBER MACHINES - BLOW MOULDING MACHINES - SAFETY REQUIREMENTS |
| I.S. EN 1034-22:2005 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 22: WOOD GRINDERS |
| I.S. EN 1870-9:2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 9: DOUBLE BLADE CIRCULAR SAWING MACHINES FOR CROSSCUTTING WITH INTEGRATED FEED AND WITH MANUAL LOADING AND/OR UNLOADING |
| DIN EN 14492-1:2010-06 | Cranes - Power driven winches and hoists - Part 1: Power driven winches (includes Amendment A1:2009) |
| I.S. EN 1870-3:2014 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 3: DOWN CUTTING CROSS-CUT SAWS AND DUAL PURPOSE DOWN CUTTING CROSS-CUT SAWS/CIRCULAR SAW BENCHES |
| I.S. EN 13886:2005 | FOOD PROCESSING MACHINERY - COOKING KETTLES EQUIPPED WITH POWERED STIRRER AND/OR MIXER - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 415-3:2000 | SAFETY OF PACKAGING MACHINES - PART 3: FORM, FILL AND SEAL MACHINES |
| DIN EN 1870-1:1999-07 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS |
| I.S. EN 13621:2004 | FOOD PROCESSING MACHINERY - SALAD DRYERS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 13378:2001 | PASTA PROCESSING PLANTS - PASTA PRESSES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 15095:2007 | POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS |
| I.S. EN 12043:2014 | FOOD PROCESSING MACHINERY - INTERMEDIATE PROVERS - SAFETY AND HYGIENE REQUIREMENTS |
| EN 16564:2014 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions |
| I.S. EN 12182:2012 | ASSISTIVE PRODUCTS FOR PERSONS WITH DISABILITY - GENERAL REQUIREMENTS AND TEST METHODS |
| I.S. EN 12201-3:2011 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 3: FITTINGS |
| DIN EN 13463-5:2011-10 | NON-ELECTRICAL EQUIPMENT INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 5: PROTECTION BY CONSTRUCTIONAL SAFETY 'C' |
| EN 1673:2000+A1:2009 | Food processing machinery - Rotary rack ovens - Safety and hygiene requirements |
| DIN EN 1859:2013-07 | Chimneys - Metal chimneys - Test methods (includes Amendment A1:2013) |
| I.S. EN 14957:2006 | FOOD PROCESSING MACHINERY - DISHWASHING MACHINES WITH CONVEYOR - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 12750:2013 | SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES |
| I.S. EN 13534:2006 | FOOD PROCESSING MACHINERY - CURING INJECTION MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 746-2:2010 | INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 2: SAFETY REQUIREMENTS FOR COMBUSTION AND FUEL HANDLING SYSTEMS |
| I.S. EN 609-2:2000 | AGRICULTURAL AND FORESTRY MACHINERY - SAFETY OF LOG SPLITTERS - PART 2: SCREW SPLITTERS |
| I.S. EN 13208:2003 | FOOD PROCESSING MACHINERY - VEGETABLE PEELERS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 1915-1:2013 | AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 1: BASIC SAFETY REQUIREMENTS |
| I.S. EN 40-2:2004 | LIGHTING COLUMNS - PART 2: GENERAL REQUIREMENTS AND DIMENSIONS |
| DIN EN 13463-5:2004-03 | NON-ELECTRICAL EQUIPMENT INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 5: PROTECTION BY CONSTRUCTIONAL SAFETY 'C' |
| I.S. EN 62282-2:2012 | FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES (IEC 62282-2:2012 (EQV)) |
| I.S. EN 12409:2008 | PLASTICS AND RUBBER MACHINES - THERMOFORMING MACHINES - SAFETY REQUIREMENTS |
| DIN EN 1987-3:2000-07 | ELECTRICALLY PROPELLED ROAD VEHICLES - SPECIFIC REQUIREMENTS FOR SAFETY - PART 3: PROTECTION OF USERS AGAINST ELECTRICAL HAZARDS |
| I.S. EN 1028-2:2002 | FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITH PRIMER - PART 2: VERIFICATION OF GENERAL AND SAFETY REQUIREMENTS |
| I.S. EN 12044:2005 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - CUTTING AND PUNCHING MACHINES - SAFETY REQUIREMENTS |
| EN 15684:2012 | Building hardware - Mechatronic cylinders - Requirements and test methods |
| DIN EN 13611:2019-06 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements |
| I.S. EN 13732:2013 | FOOD PROCESSING MACHINERY - BULK MILK COOLERS ON FARMS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND HYGIENE |
| I.S. EN 14543:2017 | SPECIFICATION FOR DEDICATED LIQUEFIED PETROLEUM GAS APPLIANCES - PARASOL PATIO HEATERS - FLUELESS RADIANT HEATERS FOR OUTDOOR OR AMPLY VENTILATED AREA USE |
| DIN EN 61046 : 1995 AMD 1 1997 | D.C. OR A.C. SUPPLIED ELECTRONIC STEP-DOWN CONVERTORS FOR FILAMENT LAMPS - GENERAL AND SAFETY REQUIREMENTS |
| I.S. EN 14597:2012 | TEMPERATURE CONTROL DEVICES AND TEMPERATURE LIMITERS FOR HEAT GENERATING SYSTEMS |
| DIN EN 13616:2004-09 | OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID PETROLEUM FUELS |
| DIN EN 1974:2010-05 | Food processing machinery - Slicing machines - Safety and hygiene requirements (includes Amendment A1:2009) |
| DIN EN 61316 : 2000-09 | INDUSTRIAL CABLE REELS |
| DIN EN 54-3:2001-10 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 3: FIRE ALARM DEVICES - SOUNDERS |
| UNI EN 1974 : 2009 | FOOD PROCESSING MACHINERY - SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 909:1999 | AGRICULTURAL AND FORESTRY MACHINERY - CENTRE PIVOT AND MOVING LATERAL TYPES IRRIGATION MACHINES - SAFETY |
| I.S. EN 12505:2000 | FOOD PROCESSING MACHINERY - CENTRIFUGAL MACHINES FOR PROCESSING EDIBLE OILS AND FATS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 12111:2014 | TUNNELLING MACHINES - ROAD HEADERS AND CONTINUOUS MINERS - SAFETY REQUIREMENTS |
| I.S. EN 1870-15:2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 15: MULTIBLADE CROSS-CUT SAWING MACHINES WITH INTEGRATED FEED OF THE WORKPIECE AND MANUAL LOADING AND/OR UNLOADING |
| I.S. EN 1114-1:2011 | PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 1: SAFETY REQUIREMENTS FOR EXTRUDERS |
| I.S. EN 1870-17:2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS) |
| I.S. EN 13418:2013 | PLASTICS AND RUBBER MACHINES - WINDING MACHINES FOR FILM OR SHEET - SAFETY REQUIREMENTS |
| I.S. EN 12921-3:2005 | MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 3: SAFETY OF MACHINES USING FLAMMABLE CLEANING LIQUIDS |
| I.S. EN 12621:2006 | MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS |
| DIN EN 1864:2008-06 | Inland navigation vessels - Wheelhouse - Ergonomic and safety requirements |
| I.S. EN 453:2014 | FOOD PROCESSING MACHINERY - DOUGH MIXERS - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN 12098-4:2005-12 | CONTROLS FOR HEATING SYSTEMS - PART 4: OPTIMUM START-STOP CONTROL EQUIPMENT FOR ELECTRICAL SYSTEMS |
| I.S. EN 26:2015 | GAS-FIRED INSTANTANEOUS WATER HEATERS FOR THE PRODUCTION OF DOMESTIC HOT WATER |
| UNI EN 15684 : 2012 | BUILDING HARDWARE - MECHATRONIC CYLINDERS - REQUIREMENTS AND TEST METHODS |
| DIN EN 13463-8:2004-01 | NON-ELECTRICAL EQUIPMENT FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 8: PROTECTION BY LIQUID IMMERSION 'K' |
| DIN EN 1854:2010-10 | Pressure sensing devices for gas burners and gas burning appliances |
| I.S. EN 12645:2014 | TYRE PRESSURE MEASURING INSTRUMENTS - DEVICES FOR INSPECTION OF PRESSURE AND/OR INFLATION/DEFLATION OF TYRES FOR MOTOR VEHICLES - METROLOGY, REQUIREMENTS AND TESTING |
| DIN EN 1760-1:1997-09 | SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE MATS AND PRESSURE SENSITIVE FLOORS |
| DIN EN 1807:1999-10 | SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES |
| DIN EN 1034-1:2010-12 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 1: Common requirements (includes Amendment A1:2010) |
| I.S. EN 1837:1999 | SAFETY OF MACHINERY - INTEGRAL LIGHTING OF MACHINES |
| I.S. EN 12355:2003 | FOOD PROCESSING MACHINERY - DERINDING-, SKINNING- AND MEMBRANE REMOVAL MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 12268:2014 | FOOD PROCESSING MACHINERY - BAND SAW MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 12981:2005 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS |
| I.S. EN 1612-2:2000 | PLASTICS AND RUBBER MACHINES - REACTION MOULDING MACHINES - PART 2: SAFETY REQUIREMENTS FOR REACTION MOULDING PLANT |
| I.S. EN 12348:2000 | CORE DRILLING MACHINES ON STAND - SAFETY |
| I.S. EN 1218-5:2004 | SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 5: ONE SIDE PROFILING MACHINES WITH FIXED TABLE AND FEED ROLLERS OR FEED CHAIN |
| EN 60947-1:2007/A2:2014 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES (IEC 60947-1:2007/A2:2014) |
| I.S. EN 1218-3:2002 | SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 3: HAND FED TENONING MACHINES WITH SLIDING TABLE FOR CUTTING STRUCTURAL TIMBERS |
| I.S. EN 500-1:2006 | MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 1: COMMON REQUIREMENTS |
| I.S. EN 13355:2005 | COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS |
| I.S. EN 378-3:2016 | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 3: INSTALLATION SITE AND PERSONAL PROTECTION |
| I.S. EN 1034-1:2000 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 1: COMMON REQUIREMENTS |
| I.S. EN 12852:2001 | FOOD PROCESSING MACHINERY - FOOD PROCESSORS AND BLENDERS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 12978:2003 | INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY DEVICES FOR POWER OPERATED DOORS AND GATES - REQUIREMENTS AND TEST METHODS |
| I.S. EN 609-1:2017 | AGRICULTURAL AND FORESTRY MACHINERY - SAFETY OF LOG SPLITTERS - PART 1: WEDGE SPLITTERS |
| I.S. EN 12178:2016 | REFRIGERATING SYSTEMS AND HEAT PUMPS - LIQUID LEVEL INDICATING DEVICES - REQUIREMENTS, TESTING AND MARKING |
| I.S. EN 1870-14:2007 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 14: VERTICAL PANEL SAWING MACHINES |
| I.S. EN 1493:2010 | VEHICLE LIFTS |
| I.S. EN 15433-6:2016 | TRANSPORTATION LOADS - MEASUREMENT AND EVALUATION OF DYNAMIC-MECHANICAL LOADS - PART 6: AUTOMATIC RECORDING SYSTEMS FOR MEASURING RANDOMLY OCCURRING SHOCK DURING MONITORING OF TRANSPORTS |
| I.S. EN 13675:2004 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR TUBE FORMING AND ROLLING MILLS AND THEIR FINISHING LINE EQUIPMENT |
| I.S. EN 13985:2003 | MACHINE TOOLS - SAFETY - GUILLOTINE SHEARS |
| I.S. EN 617:2001 | |
| I.S. EN 1755:2015 | INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - SUPPLEMENTARY REQUIREMENTS FOR OPERATION IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
| I.S. EN 1889-1:2011 | MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES |
| DIN EN 12405:2003-10 | GAS METERS - GAS-VOLUME ELECTRONIC CONVERSION DEVICES |
| I.S. EN 1034-14:2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 14: REEL SPLITTER |
| I.S. EN 13591:2005 | FOOD PROCESSING MACHINERY - FIXED DECK OVEN LOADERS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 14466:2005 | FIRE FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS |
| I.S. EN 13160-5:2016 | LEAK DETECTION SYSTEMS - PART 5: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR IN-TANK GAUGE SYSTEMS AND PRESSURISED PIPEWORK SYSTEMS |
| I.S. EN 201:2009 | PLASTICS AND RUBBER MACHINES - INJECTION MOULDING MACHINES - SAFETY REQUIREMENTS |
| I.S. EN 12312-5:2005 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 5: AIRCRAFT FUELLING EQUIPMENT |
| CEI EN 62282-2 : 2013 | FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES |
| I.S. EN 1777:2010 | HYDRAULIC PLATFORMS (HPS) FOR FIRE FIGHTING AND RESCUE SERVICES - SAFETY REQUIREMENTS AND TESTING |
| I.S. EN 12984:2006 | FOOD PROCESSING MACHINERY - PORTABLE AND/OR HAND-GUIDED MACHINES AND APPLIANCES WITH MECHANICALLY DRIVEN CUTTING TOOLS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 1473:2016 | INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS |
| EN 12312-5:2005+A1:2009 | Aircraft ground support equipment - Specific requirements - Part 5: Aircraft fuelling equipment |
| I.S. EN 12779:2015 | SAFETY OF WOODWORKING MACHINES - CHIP AND DUST EXTRACTION SYSTEMS WITH FIXED INSTALLATION - SAFETY RELATED PERFORMANCES AND SAFETY REQUIREMENTS |
| I.S. EN 61918:2013 | INDUSTRIAL COMMUNICATION NETWORKS - INSTALLATION OF COMMUNICATION NETWORKS IN INDUSTRIAL PREMISES |
| I.S. EN 12012-3:2001 | PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 3: SAFETY REQUIREMENTS FOR SHREDDERS |
| I.S. EN 12041:2014 | FOOD PROCESSING MACHINERY - MOULDERS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 1674:2015 | FOOD PROCESSING MACHINERY - DOUGH SHEETERS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 13352:2012 | SPECIFICATION FOR THE PERFORMANCE OF AUTOMATIC TANK CONTENTS GAUGES |
| I.S. EN 1175-3:1998 | SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL REQUIREMENTS - PART 3: SPECIFIC REQUIREMENTS FOR THE ELECTRIC POWER TRANSMISSION SYSTEMS OF INTERNAL COMBUSTION ENGINE POWERED TRUCKS |
| EN 50216-12:2011 | Power transformer and reactor fittings - Part 12: Fans |
| I.S. EN 15091:2013 | SANITARY TAPWARE - ELECTRONIC OPENING AND CLOSING SANITARY TAPWARE |
| I.S. EN 13617-1:2012 | PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS |
| I.S. EN 14710-1:2005 | FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITHOUT PRIMER - PART 1: CLASSIFICATION, GENERAL AND SAFETY REQUIREMENTS |
| I.S. EN 809:1998 | PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS |
| I.S. EN 88-1:2011 | PRESSURE REGULATORS AND ASSOCIATED SAFETY DEVICES FOR GAS APPLIANCES - PART 1: PRESSURE REGULATORS FOR INLET PRESSURES UP TO AND INCLUDING 50 KPA |
| I.S. EN 12050-2:2015 | WASTEWATER LIFTING PLANTS FOR BUILDINGS AND SITES - PART 2: LIFTING PLANTS FOR FAECAL-FREE WASTEWATER |
| I.S. EN 12899-1:2007 | FIXED, VERTICAL ROAD TRAFFIC SIGNS - PART 1: FIXED SIGNS |
| DIN EN 14175-2:2003-08 | FUME CUPBOARDS - PART 2: SAFETY AND PERFORMANCE REQUIREMENTS |
| EN 15571:2014 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for surface finishing machines |
| I.S. EN 13389:2005 | FOOD PROCESSING MACHINERY - MIXERS WITH HORIZONTAL SHAFTS - SAFETY AND HYGIENE REQUIREMENTS |
| EN 1829-1:2010 | High pressure water jet machines - Safety requirements - Part 1: Machines |
| I.S. EN 13870:2015 | FOOD PROCESSING MACHINERY - PORTION CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| EN 60079-15:2010 | Explosive atmospheres - Part 15: Equipment protection by type of protection "n" |
| DIN EN 12352:2006-07 | Traffic control equipment - Warning and safety light devices |
| UNI EN 13718-1 : 2014 | MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS FOR MEDICAL DEVICES USED IN AIR AMBULANCES |
| I.S. EN 1218-1:2000 | SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 1: SINGLE END TENONING MACHINES WITH SLIDING TABLE |
| I.S. EN 1010-1:2005 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS |
| I.S. EN 415-5:2006 | SAFETY OF PACKAGING MACHINES - PART 5: WRAPPING MACHINES |
| DIN EN 15339-2:2007-06 | Thermal spraying - Safety requirements for thermal spraying equipment - Part 2: Gas control units |
| I.S. EN 12012-2:2001 | PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 2: SAFETY REQUIREMENTS FOR STRAND PELLETISERS |
| I.S. EN 12352:2006 | TRAFFIC CONTROL EQUIPMENT - WARNING AND SAFETY LIGHT DEVICES |
| I.S. EN 940:2009 | SAFETY OF WOODWORKING MACHINES - COMBINED WOODWORKING MACHINES |
| I.S. EN 14044:2014 | HIGH RISE AERIAL APPLIANCES FOR FIRE AND RESCUE SERVICE USE - TURNTABLE LADDERS WITH SEQUENTIAL MOVEMENTS - SAFETY AND PERFORMANCE REQUIREMENTS AND TEST METHODS |
| I.S. EN 12853:2001 | FOOD PROCESSING MACHINERY - HAND-HELD BLENDERS AND WHISKS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 303-1:2017 | HEATING BOILERS - PART 1: HEATING BOILERS WITH FORCED DRAUGHT BURNERS - TERMINOLOGY, GENERAL REQUIREMENTS, TESTING AND MARKING |
| I.S. EN 1247:2004 | FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR LADLES, POURING EQUIPMENT, CENTRIFUGAL CASTING MACHINES, CONTINUOUS AND SEMI CONTINUOUS CASTING MACHINES |
| I.S. EN 12110:2014 | TUNNELLING MACHINES - AIR LOCKS - SAFETY REQUIREMENTS |
| I.S. EN 12159:2012 | BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES |
| DIN EN 13788:2002-04 | MACHINE TOOLS - SAFETY - MULTI-SPINDLE AUTOMATIC TURNING MACHINES |
| I.S. EN 12921-2:2005 | MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 2: SAFETY OF MACHINES USING WATER BASED CLEANING LIQUIDS |
| I.S. EN 14394:2006 | HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C |
| I.S. EN 741:2000 | CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - SAFETY REQUIREMENTS FOR SYSTEMS AND THEIR COMPONENTS FOR PNEUMATIC HANDLING OF BULK MATERIALS |
| I.S. EN 12547:2014 | CENTRIFUGES - COMMON SAFETY REQUIREMENTS |
| I.S. EN 1398:2009 | DOCK LEVELLERS - SAFETY REQUIREMENTS |
| I.S. EN 1114-2:1998 | PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 2: SAFETY REQUIREMENTS FOR DIE FACE PELLETISERS |
| DIN EN 13378:2013-05 | PASTA PROCESSING PLANTS - PASTA PRESSES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 12854:2003 | FOOD PROCESSING MACHINERY - BEAM MIXERS - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN 40-2:2005-02 | Lighting columns - Part 2: General requirements and dimensions; German version EN 40-2:2004 |
| I.S. EN 12309-2:2015 | GAS-FIRED SORPTION APPLIANCES FOR HEATING AND/OR COOLING WITH A NET HEAT INPUT NOT EXCEEDING 70 KW - PART 2: SAFETY |
| DIN EN 13289:2013-05 | PASTA PROCESSING PLANTS - DRYERS AND COOLERS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 1458-1:2011 | DOMESTIC DIRECT GAS-FIRED TUMBLE DRYERS OF TYPES B22D AND B23D, OF NOMINAL HEAT INPUT NOT EXCEEDING 6 KW - PART 1: SAFETY |
| I.S. EN 12752-1:2000 | GAS-FIRED TYPE B TUMBLE DRYERS OF NOMINAL HEAT INPUT NOT EXCEEDING 20 KW - PART 1: SAFETY |
| I.S. EN 1889-2:2003 | MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 2: RAIL LOCOMOTIVES |
| I.S. EN 13112:2002 | TANNERY MACHINES - SPLITTING AND BANDKNIFE SHEARING MACHINES - SAFETY REQUIREMENTS |
| EN 415-3:1999+A1:2009 | Safety of packaging machines - Part 3: Form, fill and seal machines |
| I.S. EN 972:1998 | TANNERY MACHINES - RECIPROCATING ROLLER MACHINES - SAFETY REQUIREMENTS |
| I.S. EN 12753:2005 | THERMAL CLEANING SYSTEMS FOR EXHAUST GAS FROM SURFACE TREATMENT EQUIPMENT - SAFETY REQUIREMENTS |
| I.S. EN 1870-5:2002 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 5: CIRCULAR SAWBENCHES/UP-CUTTING CROSS-CUT SAWING MACHINES |
| DIN EN 12012-2:2004-03 | PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 2: SAFETY REQUIREMENTS FOR STRAND PELLETISERS |
| I.S. EN 14655:2005 | FOOD PROCESSING MACHINERY - BAGUETTE SLICERS - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN 13379:2013-05 | PASTA PROCESSING PLANTS - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR, STICK MAGAZINE - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN 1970:2005-10 | ADJUSTABLE BEDS FOR DISABLED PERSONS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 618:2002 | |
| I.S. EN 13447:2001 | ELECTRICALLY PROPELLED ROAD VEHICLES - TERMINOLOGY |
| DIN EN 12957:2001-12 | MACHINE TOOLS - SAFETY - ELECTRO DISCHARGE MACHINES |
| I.S. EN 1175-1:1998 | SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL REQUIREMENTS - PART 1: GENERAL REQUIREMENTS FOR BATTERY POWERED TRUCKS |
| I.S. EN 1678:1998 | FOOD PROCESSING MACHINERY - VEGETABLE CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 1837 : 2009 | SAFETY OF MACHINERY - INTEGRAL LIGHTING OF MACHINES |
| I.S. EN 620:2002 | |
| I.S. EN 1374:2000 | AGRICULTURAL MACHINERY - SILOS STATIONARY UNLOADERS FOR ROUND SILOS - SAFETY |
| I.S. EN 1501-1:2011 | REFUSE COLLECTION VEHICLES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 1: REAR LOADED REFUSE COLLECTION VEHICLES |
| I.S. EN 1870-7:2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 7: SINGLE BLADE LOG SAWING MACHINES WITH INTEGRATED FEED TABLE AND MANUAL LOADING AND/OR UNLOADING |
| DIN EN 1760-2:2001-07 | SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE EDGES AND PRESSURE SENSITIVE BARS |
| I.S. EN 1495:1998 | LIFTING PLATFORMS - MAST CLIMBING WORK PLATFORMS |
| I.S. EN 1012-2:1996 | COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 2: VACUUM PUMPS |
| I.S. EN 536:2015 | ROAD CONSTRUCTION MACHINES - MIXING PLANTS FOR ROAD CONSTRUCTION MATERIALS - SAFETY REQUIREMENTS |
| I.S. EN 12050-3:2015 | WASTEWATER LIFTING PLANTS FOR BUILDINGS AND SITES - PART 3: LIFTING PLANTS FOR LIMITED APPLICATIONS |
| DIN EN 609-1:2017-04 | AGRICULTURAL AND FORESTRY MACHINERY - SAFETY OF LOG SPLITTERS - PART 1: WEDGE SPLITTERS |
| I.S. EN 12629-7:2004 | MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 7: STATIONARY AND MOBILE EQUIPMENT FOR LONG LINE MANUFACTURE OF PRESTRESSED PRODUCTS |
| I.S. EN 1870-4:2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTIBLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING |
| I.S. EN 12050-1:2015 | WASTEWATER LIFTING PLANTS FOR BUILDINGS AND SITES - PART 1: LIFTING PLANTS FOR WASTEWATER CONTAINING FAECAL MATTER |
| DIN EN 1034-2:2010-09 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 2: Barking drums (includes Amendment A1:2009) |
| I.S. EN 13390:2002 | FOOD PROCESSING MACHINERY - PIE AND TART MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 13204:2016 | DOUBLE ACTING HYDRAULIC RESCUE TOOLS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS |
| I.S. EN 12581:2006 | COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS |
| I.S. EN 415-7:2006 | SAFETY OF PACKAGING MACHINES - PART 7: GROUP AND SECONDARY PACKAGING MACHINES |
| I.S. EN 1987-1:1998 | ELECTRICALLY PROPELLED ROAD VEHICLES - SPECIFIC REQUIREMENTS FOR SAFETY - ON BOARD ENERGY STORAGE |
| DIN EN 12336:2010-03 | TUNNELLING MACHINES - SHIELD MACHINES, THRUST BORING MACHINES, AUGER BORING MACHINES, LINING ERECTION EQUIPMENT - SAFETY REQUIREMENTS |
| I.S. EN 1974:1998 | FOOD PROCESSING MACHINERY - SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 1859:2009 | CHIMNEYS - METAL CHIMNEYS - TEST METHODS |
| I.S. EN 1034-3:2011 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 3: REREELERS AND WINDERS |
| EN 13870:2015 | Food processing machinery - Portion cutting machines - Safety and hygiene requirements |
| I.S. EN 1673:2000 | FOOD PROCESSING MACHINERY - ROTARY RACK OVENS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 12463:2014 | FOOD PROCESSING MACHINERY - FILLING MACHINES AND AUXILIARY MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 13871:2014 | FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINERY - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 764-7 : 2004 | PRESSURE EQUIPMENT - SAFETY SYSTEMS FOR UNFIRED PRESSURE EQUIPMENT |
| UNI EN 453 : 2014 | FOOD PROCESSING MACHINERY - DOUGH MIXERS - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 940 : 2012 | SAFETY OF WOODWORKING MACHINES - COMBINED WOODWORKING MACHINES |
| UNI EN 13390 : 2010 | FOOD PROCESSING MACHINERY - PIE AND TART MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN 61557-1 : 2007 | ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 1: GENERAL REQUIREMENTS |
| CEI EN 50522 : 2011 | EARTHING OF POWER INSTALLATIONS EXCEEDING 1 KV A.C. |
| VDI/VDE 3518 Blatt 1:2011-05 | Multigas sensors - Terms, configuration, function and classification |
| VDI 3960:2015-09 | Determination of service hours of industrial trucks |
| VDI 4206 Blatt 1:2010-08 | Performance criteria and test procedures for measuring devices for monitoring emissions at firing installations - Measuring devices for the determination of gaseous emissions and flue gas parameters |
| DIN EN 50303 : 2001-05 | GROUP 1, CATEGORY M1 EQUIPMENT INTENDED TO REMAIN FUNCTIONAL IN ATMOSPHERES ENDANGERED BY FIREDAMP AND/OR COAL DUST |
| VDI 3805 Blatt 20:2017-02 | Product data exchange in the building services - Storage tanks and instantaneous water heater |
| DIN EN 50153 : 2018 | RAILWAY APPLICATIONS - ROLLING STOCK - PROTECTIVE PROVISIONS RELATING TO ELECTRICAL HAZARDS |
| NF EN 12355 : 2003 + A1 2010 | FOOD PROCESSING MACHINERY - DERIDING-, SKINNING- AND MEMBRANE REMOVAL MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| VDE 0625-10 : 1994 | APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES; MINI-COUPLERS FOR THE INTERCONNECTION OF ELECTRICAL MAINS SUPPLIED EQUIPMENT IN ROAD VEHICLES |
| VDI 3805 Blatt 24:2017-02 (Draft) | Product data exchange in the building services - Actuators used in building services |
| NF EN 619 : 2003 + A1 2010 | |
| VDE 0129-507 : 2001 | ELECTRICAL INSTALLATIONS IN SHIPS - PART 507: PLEASURE CRAFT (IEC 60092-507:2000) |
| VDI 2381 Blatt 1:2009-07 | Final inspection of stationary and track-bound cranes - Instructionals form for experts |
| VDI/VDE 3844:2014-01 | Industrial process control valves - Actuators for control valves |
| VDI 3809 Blatt 2:2014-10 | Testing of building installations - Firefighters lifts |
| VDE 0170-12-2 : 2001-05 | GROUP 1, CATEGORY M1 EQUIPMENT INTENDED TO REMAIN FUNCTIONAL IN ATMOSPHERES ENDANGERED BY FIREDAMP AND/OR COAL DUST |
| VDE 0128 : 1998 | SIGNS AND LUMINOUS-DISCHARGE-TUBE INSTALLATIONS OPERATING FROM A NO-LOAD RATED OUTPUT VOLTAGE EXCEEDING 1 KV BUT NOT EXCEEDING 10 KV |
| ONORM EN 15094 : 2009 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR COLD FLAT ROLLING MILLS |
| VDI 6004 Blatt 3:2009-05 | Protection for building services - Vandalism or destruction of property |
| VDI 4206 Blatt 4:2013-08 | Performance criteria and test procedures for measuring devices for monitoring emissions at small firing installations - Measuring devices for the determination of moisture of lumpy wood |
| VDE 0115-2 : 2018 | RAILWAY APPLICATIONS - ROLLING STOCK - PROTECTIVE PROVISIONS RELATING TO ELECTRICAL HAZARDS |
| DIN EN 50066 : 1994 | APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES; MINI-COUPLERS FOR THE INTERCONNECTION OF ELECTRICAL MAINS SUPPLIED EQUIPMENT IN ROAD VEHICLES |
| I.S. EN 12806:2003 | AUTOMOTIVE LIQUEFIED PETROLEUM GAS COMPONENTS - OTHER THAN CONTAINERS |
| VDE V 0161-234 : 1998 | Aviation ground lighting electric installation - Flashing lights Equipment specifications and tests; |
| VDI 6000 Blatt 5:2004-11 | Provision and installation of sanitary facilities - Housing for the elderly, old people\'s homes, nursing homes |
| VDE 0712-22 : 2000 | AUXILIARIES FOR LAMPS - A.C. SUPPLIED ELECTRONIC BALLASTS FOR TUBULAR FLUORESCENT LAMPS - GENERAL AND SAFETY REQUIREMENTS |
| VDE 0220-3 : 1977 | SPECIFICATION FOR SINGLE AND MULTIPLE CABLE CLAMPS WITH INSULATING PARTS IN ELECTRICAL POWER CABLE INSTALLATIONS UP TO 1000 V |
| VDI 6000 Blatt 3:2011-06 | Provision and installation of sanitary facilities - Public buildings and -areas |
| VDI 4464:2012-05 | Operation of industrial trucks with RFID components |
| I.S. EN 12067-2:2004 | GAS/AIR RATIO CONTROLS FOR GAS BURNERS AND GAS BURNING APPLIANCES - PART 2: ELECTRONIC TYPES |
| VDI 2710 Blatt 2:2008-08 | AGVS check list - Planning support for operators und manufacturers of automated guided vehicle-systems (AGVS) |
| NF EN 13885 : 2005 + A1 2010 | FOOD PROCESSING MACHINERY - CLIPPING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| KTA 3403 : 2015(R2017) | CABLE PENETRATIONS THROUGH THE REACTOR CONTAINMENT VESSEL OF NUCLEAR POWER PLANTS |
| NF EN 12806 : 2003 | AUTOMOTIVE LIQUEFIED PETROLEUM GAS COMPONENTS - OTHER THAN CONTAINERS |
| VDI 4458:2016-04 | Fleet management systems for industrial trucks |
| BS 88-2(2010) : 2010 | LOW-VOLTAGE FUSES - PART 2: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY AUTHORIZED PERSONS (FUSES MAINLY FOR INDUSTRIAL APPLICATION) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO J |
| DIN V ENV 50234 : 1998 | AERONAUTICAL GROUND LIGHTING ELECTRICAL INSTALLATION - FLASHING LIGHTS - EQUIPMENT SPECIFICATIONS AND TESTS |
| VDI/VDE 3850 Blatt 3:2015-11 | Development of usable user interfaces for technical plants - Features, design and applications of user interfaces with touchscreen |
| 08/30178810 DC : DRAFT MAY 2008 | BS EN 12750 - SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES |
| UNE-EN 16304:2013 | Automatic vent valves for gas burners and gas burning appliances |
| UNE-EN 13616-1:2016 | Overfill prevention devices for static tanks for liquid fuels - Part 1: Overfill prevention devices with closure device |
| CEI CLC/TS 50537-3 : 2011 | RAILWAY APPLICATIONS - MOUNTED PARTS OF THE TRACTION TRANSFORMER AND COOLING SYSTEM - PART 3: WATER PUMP FOR TRACTION CONVERTERS |
| CEI EN 88528-11 : 2005 | RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 11: ROTARY UNINTERRUPTIBLE POWER SYSTEMS - PERFORMANCE REQUIREMENTS AND TEST METHODS |
| CEI EN 50110-1 : 2014 | OPERATION OF ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS |
| CEI UNI EN 45510-6-5 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 6-5: TURBINE AUXILIARIES - DRY COOLING SYSTEMS |
| CEI EN 50050-2 : 2014 | ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 2: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE COATING POWDER |
| DIN EN 15949:2012-05 | Safety of machinery - Safety requirements for bar mills, structural steel mills and wire rod mills |
| DIN EN 1501-3:2010-06 | Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 3: Front loaded refuse collection vehicles |
| TS 102 872 : 1.1.1 | ACCESS, TERMINALS, TRANSMISSION AND MULTIPLEXING (ATTM); COPPER EXTERNAL NETWORK TESTING INTERFACE |
| BS EN 60974-8:2009 | Arc welding equipment Gas consoles for welding and plasma cutting systems |
| DIN EN 13035-11:2010-07 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 11: Drilling machines (includes Amendment A1:2010) |
| UNE-EN 50556:2011 | Road traffic signal systems |
| DIN EN 16304:2013-05 | Automatic vent valves for gas burners and gas burning appliances |
| BS EN 50516-2-1:2011 | Industrial connector sets and interconnect components to be used in optical fibre control and communication systems. Product specifications Type ODVA PC industrial terminated on EN 60793-2-10 category A1a and A1b multimode fibre to meet the requirements of category I (industrial environments) as specified in EN 50173-1 and IEC 61753-1-3 |
| 09/30185957 DC : 0 | BS EN ISO 12696 - CATHODIC PROTECTION OF STEEL IN CONCRETE |
| PREN 50223 : DRAFT 2013 | STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE FLOCK MATERIAL - SAFETY REQUIREMENTS |
| 06/30146388 DC : DRAFT FEB 2006 | CENELEC TS 61643-12 - LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 12: SURGE PROTECTIVE DEVICES CONNECTED TO LOW-VOLTAGE POWER SYSTEMS - SELECTION AND APPLICATION PRINCIPLES |
| CLC/TS 50535:2010 | Railway applications - Onboard auxiliary power converter systems |
| PREN 62561-6 : DRAFT 2011 | LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 6: REQUIREMENTS FOR LIGHTNING STRIKE COUNTERS (LSC) |
| 10/30227686 DC : 0 | BS EN 13352 - SPECIFICATION FOR THE PERFORMANCE OF AUTOMATIC TANK CONTENTS GAUGES |
| UNI EN 15861 : 2012 | FOOD PROCESSING MACHINERY - SMOKEHOUSES - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 16005 : 2012 | POWER OPERATED PEDESTRIAN DOORSETS - SAFETY IN USE - REQUIREMENTS AND TEST METHODS |
| UNI EN 691-1 : 2012 | SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS |
| 11/30201835 DC : 0 | BS EN 50136-2 - ALARM SYSTEMS - ALARM TRANSMISSION SYSTEMS AND EQUIPMENT - PART 2: REQUIREMENTS FOR SUPERVISED PREMISES TRANSCEIVER (SPT) |
| NF EN 61242 : 1997 AMD 13 2018 | ELECTRICAL ACCESSORIES - CABLE REELS FOR HOUSEHOLD AND SIMILAR PURPOSES |
| DIN EN 54-23:2010-06 | Fire detection and fire alarm systems - Part 23: Fire alarm devices - Visual alarm devices |
| DIN EN 1474-1:2009-03 | INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS |
| 02/714359 DC : DRAFT DEC 2002 | EN 14597 - TEMPERATURE CONTROL DEVICES AND TEMPERATURE LIMITERS FOR HEAT GENERATING SYSTEMS (CENTRAL HEATING SYSTEMS) |
| I.S. EN 50123-3:2003 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SWITCHGEAR - PART 3: INDOOR D.C. DISCONNECTORS, SWITCH-DISCONNECTORS AND EARTHING SWITCHES |
| 17/30348447 DC : 0 | BS EN 17067 - FORESTRY MACHINERY - SAFETY REQUIREMENTS ON RADIO REMOTE CONTROLS |
| BS EN 50617-1:2015 | Railway applications. Technical parameters of train detection systems for the interoperability of the trans-European railway system Track circuits |
| BS EN 60945:2002 | Maritime navigation and radiocommunication equipment and systems. General requirements. Methods of testing and required test results |
| I.S. EN 12601:2010 | RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN GENERATING SETS - SAFETY |
| BS EN 60598-2-4:1998 | Luminaires. Particular requirements Portable general purpose luminaires |
| DIN EN 15609:2012-07 | LPG equipment and accessories - LPG propulsion systems for boats, yachts and other craft |
| 03/319909 DC : DRAFT NOV 2003 | BS EN 14817 - RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - AIR-SPRING CONTROL ELEMENTS |
| UNI EN 415-8 : 2008 | SAFETY OF PACKAGING MACHINES - PART 8: STRAPPING MACHINES |
| 07/30162539 DC : 0 | BS EN 50131-2-2 - ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-2: INTRUSION DETECTORS - PASSIVE INFRARED DETECTORS |
| I.S. EN 62252:2004 | MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - RADAR FOR CRAFT NOT IN COMPLIANCE WITH IMO SOLAS CHAPTER 5 - PERFORMANCE REQUIREMENTS, METHODS OF TEST AND REQUIRED TEST RESULTS |
| VDE 0468-2-18 : 2018 | ENVIRONMENTAL TESTING - PART 2-18: TESTS - TEST R AND GUIDANCE: WATER (IEC 60068-2-18:2017) |
| 10/30217405 DC : 0 | BS EN 50556 - ROAD TRAFFIC SIGNAL SYSTEMS |
| 13/30257895 DC : 0 | BS EN 1755 - SAFETY OF INDUSTRIAL TRUCKS - OPERATION IN POTENTIALLY EXPLOSIVE ATMOSPHERES - USE IN FLAMMABLE GAS, VAPOUR, MIST AND DUST |
| 13/30289289 DC : 0 | BS EN 12405-3 - GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER |
| PD CEN/TS 16819:2015 | Postal services. Parcel boxes for end use. Technical features |
| DIN EN 15165:2015-01 | FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| EN 16893:2018 | Conservation of Cultural Heritage - Specifications for location, construction and modification of buildings or rooms intended for the storage or use of heritage collections |
| BS EN 50249:2002 | Electromagnetic locators for buried pipes and cables. Performance and safety |
| BS EN 16840:2017 | Inland navigation vessels. Electrical shore connection, three-phase current 400 V, 50 Hz, at least 250 A |
| 16/30312315 DC : 0 | BS EN ISO 80601-2-55 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-55: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF RESPIRATORY GAS MONITORS |
| BS EN 50365:2002 | Electrically insulating helmets for use on low voltage installations |
| I.S. EN 50131-2-6:2008 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-6: OPENING CONTACTS (MAGNETIC) |
| EN 60728-11:2017 | Cable networks for television signals, sound signals and interactive services - Part 11: Safety |
| I.S. EN 297:1994 | GAS FIRED CENTRAL HEATING BOILERS - TYPE B11 AND B11BS BOILERS FITTED WITH ATMOSPHERIC BURNERS OF NOMINAL HEAT INPUT NOT EXCEEDING 70 KW |
| I.S. EN 13616-2:2016 | OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID FUELS - PART 2: OVERFILL PREVENTION DEVICES WITHOUT A CLOSURE DEVICE |
| BS EN 50164-3 : 2006 | LIGHTNING PROTECTION COMPONENTS (LPC) - PART 3: REQUIREMENTS FOR ISOLATING SPARK GAPS |
| UNI EN 12693 : 2008 | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS |
| CEI EN 61076-3-118 : 2011 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-118: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR A 4 POLE + PE POWER CONNECTOR WITH PUSH-PULL COUPLING |
| PD CEN/TR 16061:2010 | Gas meters. Smart gas meters |
| CEI EN 50516-1-1 : 2012 | INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 1-1: TYPE SC-RJ PC INDUSTRIAL TERMINATED ON EN 60793-2-10 CATEGORY A1A AND A1B MULTIMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY I (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN IEC 61753-1-3 |
| BS EN 50083-5:2002 | Cabled distribution systems for television and sound signals Headend equipment |
| BS EN 50131-10:2014 | Alarm systems. Intrusion and hold-up systems Application specific requirements for Supervised Premises Transceiver (SPT) |
| 09/30214460 DC : 0 | BS EN 50548 - JUNCTION BOXES FOR PHOTOVOLTAIC MODULES |
| BS EN 62790:2015 | Junction boxes for photovoltaic modules. Safety requirements and tests |
| 14/30303762 DC : 0 | BS EN 16282-8 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION - PART 8: INSTALLATIONS FOR TREATMENT OF COOKING FUMES; REQUIREMENTS AND TESTING |
| BS EN 14829:2007 | Independent gas-fired flueless space heaters for nominal heat input not exceeding 6 kW |
| BS EN 62271-103:2011 | High-voltage switchgear and controlgear Switches for rated voltages above 1 kV up to and including 52 kV |
| I.S. EN 13788:2002 | MACHINE TOOLS - SAFETY - MULTI-SPINDLE AUTOMATIC TURNING MACHINES |
| 12/30265289 DC : 0 | BS EN 12050-1 - WASTEWATER LIFTING PLANTS FOR BUILDINGS AND SITES - PART 1: LIFTING PLANTS FOR WASTEWATER CONTAINING FAECAL MATTER |
| CEI EN 62368-1 : 2016 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
| BS EN 50050-2:2013 | Electrostatic hand-held spraying equipment. Safety requirements Hand-held spraying equipment for ignitable coating powder |
| DIN EN 81-43:2010-05 | Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 43: Lifts for cranes |
| I.S. EN 848-1:2007 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 1: SINGLE SPINDLE VERTICAL MOULDING MACHINES |
| I.S. EN 613:2000 | INDEPENDENT GAS-FIRED CONVECTION HEATERS |
| BS EN 50512:2009 | Electrical installations for lighting and beaconing of aerodromes. Advanced visual docking guidance systems (A-VDGS) |
| PREN 50524 : DRAFT 2008 | DATA SHEET AND NAME PLATE FOR PHOTOVOLTAIC INVERTERS |
| UNE-EN 50490:2010 | Electrical installations for lighting and beaconing of aerodromes - Technical requirements for aeronautical ground lighting control and monitoring systems - Units for selective switching and monitoring of individual lamps |
| PREN 1473 : DRAFT 2018 | INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS |
| UNE-EN 50512:2011 | Electrical installations for lighting and beaconing of aerodromes - Advanced Visual Docking Guidance Systems (A-VDGS) |
| BS EN 14154-4:2014 | Water meters Additional functionalities |
| CEI EN 61753-1 : 2009 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 1: GENERAL AND GUIDANCE FOR PERFORMANCE STANDARDS |
| I.S. EN 50174-2:2009 | INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 2: INSTALLATION PLANNING AND PRACTICES INSIDE BUILDINGS |
| BS EN 60601-2-62:2015 | Medical electrical equipment Particular requirements for the basic safety and essential performance of high intensity therapeutic ultrasound (HITU) equipment |
| 13/30286103 DC : 0 | BS EN 12331 - FOOD PROCESSING MACHINERY - MINCING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| 08/30173038 DC : DRAFT JAN 2008 | BS EN 422 - PLASTICS AND RUBBER MACHINES - BLOW MOULDING MACHINES - SAFETY REQUIREMENTS |
| DD CLC/TS 50537-1:2010 | Railway applications. Mounted parts of the traction transformer and cooling system HV bushing for traction transformers |
| PREN 1493 : DRAFT 2008 | VEHICLE LIFTS |
| PREN 13617-1 : DRAFT 2010 | PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS |
| 00/541673 DC : DRAFT NOV 2000 | BS EN 14044 - SEMI-AUTOMATIC TURNTABLE LADDERS FOR FIRE SERVICE USE - REQUIREMENTS AND TEST METHODS |
| 13/30281196 DC : 0 | BS EN ISO 9934-3 - NON-DESTRUCTIVE TESTING - MAGNETIC PARTICLE TESTING - PART 3: EQUIPMENT |
| BS EN 61000-5-7:2001 | Electromagnetic compatibility (EMC). Installation and mitigation guidelines Installation and mitigation guidelines. Degrees of protection by enclosures against electromagnetic disturbances (EM code) - Degrees of protection against electromagnetic disturbances provided by enclosures (EM code) |
| DIN EN 15180:2015-01 | FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS |
| PREN 13871 : DRAFT 2012 | FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINERY - SAFETY AND HYGIENE REQUIREMENTS |
| 16/30333925 DC : 0 | BS EN 13976-2 - RESCUE SYSTEMS - TRANSPORTATION OF INCUBATORS - PART 2: SYSTEM REQUIREMENTS |
| PREN 13379 : DRAFT 2016 | PASTA PROCESSING PLANT - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 60297-3-109:2016 | MECHANICAL STRUCTURES FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - DIMENSIONS OF MECHANICAL STRUCTURES OF THE 482,6 MM (19 IN) SERIES - PART 3-109: DIMENSIONS OF CHASSIS FOR EMBEDDED COMPUTING DEVICES |
| BS EN 60974-6:2016 | Arc welding equipment Limited duty equipment |
| I.S. EN 16005:2012 | POWER OPERATED PEDESTRIAN DOORSETS - SAFETY IN USE - REQUIREMENTS AND TEST METHODS |
| 09/30200143 DC : 0 | BS EN 62080 - SOUND SIGNALLING DEVICES FOR HOUSEHOLD AND SIMILAR PURPOSES |
| 13/30278672 DC : 0 | BS EN 81-72 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PARTICULAR APPLICATIONS FOR PASSENGER AND GOODS PASSENGER LIFTS - PART 72: FIREFIGHTERS LIFTS |
| EI TP PETROLEUM ROAD TANKER : 2010 | PETROLEUM ROAD TANKER DESIGN AND CONSTRUCTION |
| I.S. EN 13244-3:2002 | PLASTICS PIPING SYSTEMS FOR BURIED AND ABOVE-GROUND PRESSURE SYSTEMS FOR WATER FOR GENERAL PURPOSES DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - FITTINGS |
| BS EN 61753-1-3:2014 | Fibre optic interconnecting devices and passive components. Performance standard General and guidance for single-mode fibre optic connector and cable assembly for industrial environment, Category I |
| BS EN 50291:2001 | Electrical apparatus for the detection of carbon monoxide in domestic premises. Test methods and performance requirements |
| UNE-EN 61008-1:2013 | Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules |
| I.S. EN 115:1995 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF ESCALATORS AND PASSENGER CONVEYORS |
| I.S. EN 60238:2004 | EDISON SCREW LAMPHOLDERS (IEC 60238:2004 (EQV)) |
| BS EN 62310-1:2005 | Static transfer systems (STS) General and safety requirements |
| 11/30248856 DC : 0 | BS EN 50059:2011 - ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - HAND-HELD SPRAYING EQUIPMENT FOR NON-IGNITABLE COATING MATERIALS |
| 06/30118768 DC : 0 | EN 1398 - DOCK LEVELLERS |
| 08/30181001 DC : DRAFT APR 2008 | BS EN 50512 - ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - ADVANCED VISUAL DOCKING GUIDANCE SYSTEMS (A-VDGS) |
| BS EN 15954-2:2013 | Railway applications. Track. Trailers and associated equipment General safety requirements |
| 16/30337802 DC : 0 | BS EN 1974 - FOOD PROCESSING MACHINERY - SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| 10/30232428 DC : DRAFT DEC 2010 | BS EN 1870-16 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V CUTTING |
| I.S. EN 50173-1:2011 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| BS EN 50018:2000 | Electrical apparatus for potentially explosive atmospheres. Flameproof enclosure \'d\' |
| UNE-EN 62586-1:2014 | Power quality measurement in power supply systems - Part 1: Power quality instruments (PQI) |
| UNE-EN 62718:2016 | Railway applications - Rolling stock - DC supplied electronic ballasts for lighting fluorescent lamps |
| 03/117188 DC : DRAFT OCT 2003 | BS EN 12101-10 - SMOKE AND HEAT CONTROL SYSTEMS - PART 10: POWER SUPPLIES |
| BS EN 50486:2008 | Equipment for use in audio and video door-entry systems |
| I.S. EN 50136-2:2013 | ALARM SYSTEMS - ALARM TRANSMISSION SYSTEMS AND EQUIPMENT - PART 2: REQUIREMENTS FOR SUPERVISED PREMISES TRANSCEIVER (SPT) |
| I.S. EN 61514-2:2013 | INDUSTRIAL PROCESS CONTROL SYSTEMS - PART 2: METHODS OF EVALUATING THE PERFORMANCE OF INTELLIGENT VALVE POSITIONERS WITH PNEUMATIC OUTPUTS MOUNTED ON AN ACTUATOR VALVE ASSEMBLY (IEC 61514-2:2013 (EQV)) |
| I.S. EN 62271-204:2011 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 204: RIGID GAS-INSULATED TRANSMISSION LINES FOR RATED VOLTAGE ABOVE 52 KV (IEC 62271-204:2011 (EQV)) |
| EN 1218-1:1999+A1:2009 | Safety of woodworking machines - Tenoning machines - Part 1: Single end tenoning machines with sliding table |
| 15/30272336 DC : 0 | BS EN 50411-3-4 - FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-4: FIBRE MANAGEMENT SYSTEM, MODULAR SPLICE AND CONNECTOR WALL BOX, FOR CATEGORY C & A |
| BS EN 50411-3-1:2012 | Fibre organisers and closures to be used in optical fibre communication systems. Product specifications Fibre management system, splice wall box, for category C & G |
| PREN 12098-3 : DRAFT 2015 | CONTROLS FOR HEATING SYSTEMS - PART 3: CONTROL EQUIPMENT FOR ELECTRICAL HEATING SYSTEMS - MODULES M3-5, 6, 7, 8 |
| 10/30233212 DC : 0 | BS EN 848-3 - SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOLS - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES |
| PREN 81-71 : DRAFT 2015 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PARTICULAR APPLICATIONS TO PASSENGER LIFTS AND GOODS PASSENGER LIFTS - PART 71: VANDAL RESISTANT LIFTS |
| 12/30260552 DC : 0 | BS EN 50174-3:201X - INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS |
| 06/30125306 DC : 0 | EN 15609 - LPG EQUIPMENT AND ACCESSORIES - LPG PROPULSION SYSTEMS FOR BOATS, YACHTS AND OTHER CRAFT - INSTALLATION REQUIREMENTS |
| 11/30251965 DC : 0 | BS EN 453 - FOOD PROCESSING MACHINERY - DOUGH MIXERS - SAFETY AND HYGIENE REQUIREMENTS |
| NF EN 50119 : 2010 AMD 1 2013 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES |
| PREN 50617-1 : DRAFT 2013 | RAILWAYS APPLICATIONS - BASIC PARAMETERS OF TRAIN DETECTION SYSTEMS - PART 1: TRACK CIRCUITS |
| 12/30253907 DC : DRAFT JULY 2012 | BS EN 1807-1 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - TABLE BAND SAWS AND BAND RE-SAWS |
| NF EN 50541-1 : 2011 | THREE PHASE DRY-TYPE DISTRIBUTION TRANSFORMERS 50 HZ, FROM 100 KVA TO 3150 KVA, WITH HIGHEST VOLTAGE FOR EQUIPMENT NOT EXCEEDING 36 KV - PART 1: GENERAL REQUIREMENTS |
| EN 61851-21:2002 | Electric vehicle conductive charging system - Part 21: Electric vehicle requirements for conductive connection to an a.c/d.c. supply |
| DIN EN 16005:2013-01 | Power operated pedestrian doorsets - Safety in use - Requirements and test methods |
| UNI 11316 : 2009 | WELDING OF PLASTIC MATERIALS - POLYFUSION WELDING MACHINES FOR SOCKET JOINING OF POLYOLEFIN PIPES AND FITTINGS FOR PRESSURE FLUIDS PIPELINES |
| BS EN 61800-4:2003 | Adjustable speed electrical power drive systems General requirements. Rating specifications for a.c. power drive systems above 1000 V a.c. and not exceeding 35 kV |
| DIN EN 15061:2009-05 | Safety of machinery - Safety requirements for strip processing line machinery and equipment (includes Amendment A1:2008) |
| BS EN 15267-4:2017 | Air quality. Certification of automated measuring systems Performance criteria and test procedures for automated measuring systems for periodic measurements of emissions from stationary sources |
| BS EN 16479:2014 | Water quality. Performance requirements and conformity test procedures for water monitoring equipment. Automated sampling devices (samplers) for water and waste water |
| UNI EN 12405-2 : 2012 | GAS METERS - CONVERSION DEVICES - PART 2: ENERGY CONVERSION |
| 09/30202307 DC : 0 | BS EN 12514-1 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 1: SAFETY REQUIREMENTS AND TESTS - TERMINOLOGY, GENERAL REQUIREMENTS |
| PREN 14492-1 : DRAFT 2015 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| 10/30216693 DC : 0 | BS EN 45545-4 - RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 4: FIRE SAFETY REQUIREMENTS FOR ROLLING STOCK DESIGN |
| NF EN 15420 : 2012 | GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT EXCEEDING 70 KW, BUT NOT EXCEEDING 1000 KW |
| EN 60400:2017 | Lampholders for tubular fluorescent lamps and starterholders |
| 12/30254899 DC : 0 | BS EN 54-2 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 2: CONTROL AND INDICATING EQUIPMENT |
| DIN EN 15684:2013-01 | Building hardware - Mechatronic cylinders - Requirements and test methods |
| 10/30219405 DC : 0 | BS EN 13617-1 - PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS |
| BS EN 50123-7-1:2003 | Railway applications. Fixed installations. d.c. switchgear. Measurement, control and protection devices for specific use in d.c. traction systems Measurement, control and protection devices for specific use in d.c. traction systems. Application guide |
| BS EN 15164:2008 | Machines and plants for mining and tooling of natural stone. Safety. Requirements for chain- and belt-slotting machines |
| BS EN 60974-5:2013 | Arc welding equipment Wire feeders |
| 10/30218092 DC : 0 | BS EN 15502-1 - GAS-FIRED HEATING BOILERS - PART 1: GENERAL REQUIREMENTS AND TESTS |
| BS EN 1807-2:2013 | Safety of woodworking machines. Band sawing machines Log sawing machines |
| NF EN 15597-1 : 2010 | WINTER MAINTENANCE EQUIPMENT - SPREADING MACHINES (GRITTING MACHINES) - PART 1: GENERAL REQUIREMENTS AND DEFINITIONS FOR SPREADING MACHINES |
| 95/101341 DC : DRAFT FEB 1995 | PREN 1823 - EMERGENCY ROADSIDE TELEPHONES |
| DIN EN 16743:2016-05 | FOOD PROCESSING MACHINERY - AUTOMATIC INDUSTRIAL SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 50299-2:2014 | Oil-immersed cable connection assemblies for transformers and reactors having highest voltage for equipment Um from 72,5 kV to 550 kV Dry-type cable terminations |
| BS EN 15467:2014 | Food processing machinery. Fish heading and filleting machines. Safety and hygiene requirements |
| NF EN 12405-1 : 2005 + A2 2010 | GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| BS EN 50379-3:2012 | Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances Performance requirements for apparatus used in non-statutory servicing of gas fired heating appliances |
| UNI CEI EN 50194-1 : 2010 | ELECTRICAL APPARATUS FOR THE DETECTION OF COMBUSTIBLE GASES IN DOMESTIC PREMISES - PART 1: TEST METHODS AND PERFORMANCE REQUIREMENTS |
| EN IEC 62613-1:2018 | Plugs, socket-outlets and ship couplers for high-voltage shore connection systems (HVSC-Systems) - Part 1: General requirements |
| 94/712993 DC : DRAFT NOV 1994 | PREN 45511 - GUIDE FOR PROCUREMENT - ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR |
| 07/30163658 DC : 0 | BS EN 621 - NON-DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW, WITHOUT A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR AND/OR COMBUSTION PRODUCTS |
| 10/30232431 DC : DRAFT DEC 2010 | BS EN 1870-17 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (MANUAL RADIAL ARM SAWS) |
| BS EN 1010-2 : 2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 2: PRINTING AND VARNISHING MACHINES INCLUDING PRE-PRESS MACHINERY |
| 14/30214363 DC : 0 | BS EN 15220 - RAILWAY APPLICATIONS - BRAKE INDICATORS |
| BS EN 15597-1:2009 | Winter maintenance equipment. Spreading machines (gritting machines) General requirements and definitions for spreading machines |
| 09/30178337 DC : 0 | BS EN 1870-9:2000/A1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 9: DOUBLE BLADE CIRCULAR SAWING MACHINES FOR CROSS-CUTTING WITH INTEGRATED FEED AND WITH MANUAL LOADING AND/OR UNLOADING |
| I.S. EN 60950-22:2017 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 22: EQUIPMENT TO BE INSTALLED OUTDOORS |
| 15/30329716 DC | BS EN 13289. Pasta processing plants. Dryers and coolers. Safety and hygiene requirements |
| UNI EN 15094 : 2009 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR COLD FLAT ROLLING MILLS |
| BS EN 61032:1998 | Protection of persons and equipment by enclosures. Probes for verification |
| EN 1473:2016 | Installation and equipment for liquefied natural gas - Design of onshore installations |
| UNI EN 15597-1 : 2010 | WINTER MAINTENANCE EQUIPMENT - SPREADING MACHINES (GRITTING MACHINES) - PART 1: GENERAL REQUIREMENTS AND DEFINITIONS FOR SPREADING MACHINES |
| 09/30201992 DC : 0 | BS EN 12182 - ASSISTIVE PRODUCTS FOR PERSONS WITH DISABILITY - GENERAL REQUIREMENTS AND TEST METHODS |
| 13/30271356 DC : 0 | BS EN 50411-3-5 - FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-5 WALL OUTLET |
| 14/30301263 DC : 0 | BS EN 13160-5 - LEAK DETECTION SYSTEMS - PART 5: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR IN-TANK GAUGE SYSTEMS AND PRESSURISED PIPEWORK SYSTEMS |
| BS EN 62252:2004 | Maritime navigation and radiocommunication equipment and systems. Radar for craft not in compliance with IMO SOLAS Chapter V. Performance requirements methods of test and required test results |
| 09/30181706 DC : 0 | BS EN 12355:2003/A1 - FOOD PROCESSING MACHINERY - DERINDING-, SKINNING- AND MEMBRANE REMOVAL MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 61076-3-118:2010 | Connectors for electronic equipment. Product requirements Rectangular connectors. Detail specification for a 4 pole + PE power connector with push-pull coupling |
| PREN 50543 : DRAFT 2009 | ELECTRONIC PORTABLE AND TRANSPORTABLE APPARATUS DESIGNED TO DETECT AND MEASURE CARBON DIOXIDE AND/OR CARBON MONOXIDE IN INDOOR AMBIENT AIR - REQUIREMENTS AND TEST METHODS |
| DIN EN 15000:2009-06 | SAFETY OF INDUSTRIAL TRUCKS - SELF PROPELLED VARIABLE REACH TRUCKS - SPECIFICATION, PERFORMANCE AND TEST REQUIREMENTS FOR LONGITUDINAL LOAD MOMENT INDICATORS AND LONGITUDINAL LOAD MOMENT LIMITERS |
| 06/30150303 DC : DRAFT MAY 2006 | EN 50291-1 - ELECTRICAL APPARATUS FOR THE DETECTION OF CARBON MONOXIDE IN DOMESTIC PREMISES - PART 1: TEST METHODS AND PERFORMANCE REQUIREMENTS |
| 05/30129943 DC : 0 | EN 15162 - MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY REQUIREMENTS FOR GANG SAWS |
| NF EN 15714-3 : 2009 | INDUSTRIAL VALVES - ACTUATORS - PART 3: PNEUMATIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| 05/30128234 DC : DRAFT FEB 2005 | EN 1473 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS |
| DIN EN 15431:2008-05 | Winter and road service area maintenance equipments - Power system and related controls - Interchangeability and performance requirements |
| BS EN 60335-2-99:2003 | Specification for safety of household and similar electrical appliances Particular requirements for commercial electric hoods |
| UNE-EN 13637:2016 | Building hardware - Electrically controlled exit systems for use on escape routes - Requirements and test methods |
| 05/30090970 DC : 0 | EN 15220-1 - RAILWAY APPLICATIONS - BRAKE INDICATORS - PART 1: PNEUMATIC OPERATION BRAKE INDICATORS |
| 05/30130673 DC : DRAFT MAR 2005 | BS EN 15166 - FOOD PROCESSING MACHINERY - AUTOMATIC BACK SPLITTING MACHINES OF BUTCHERY CARCASSES - SAFETY AND HYGIENE REQUIREMENTS |
| 03/307803 DC : DRAFT MAY 2003 | EN 61009-1 - RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITH INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCCB'S) - PART 1: GENERAL RULES |
| BS EN 62314:2006 | Solid-state relays |
| I.S. EN 1987-3:1998 | ELECTRICALLY PROPELLED ROAD VEHICLES - SPECIFIC REQUIREMENTS FOR SAFETY - PART 3: PROTECTION OF USERS AGAINST ELECTRICAL HAZARDS |
| UNE-EN 16282-2:2017 | Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 2: Kitchen ventilation hoods; design and safety requirements |
| 10/30211242 DC : 0 | BS EN 12601 - RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN GENERATING SETS - SAFETY |
| NF EN 50215 : 2010 | RAILWAY APPLICATIONS - ROLLING STOCK - TESTING OF ROLLING STOCK ON COMPLETION OF CONSTRUCTION AND BEFORE ENTRY INTO SERVICE |
| BS EN 15609:2012 | LPG equipment and accessories. LPG propulsion systems for boats, yachts and other craft |
| BS EN 61076-3-114:2009 | Connectors for electronic equipment. Product requirements Rectangular connectors. Detail specification for.protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface. Variant 11 related to IEC 61076-3-106. Bayonet coupling type |
| BS EN 1807-1:2013 | Safety of woodworking machines. Band sawing machines Table band saws and band re-saws |
| I.S. EN 50588-1:2017 | MEDIUM POWER TRANSFORMERS 50 HZ, WITH HIGHEST VOLTAGE FOR EQUIPMENT NOT EXCEEDING 36 KV - PART 1: GENERAL REQUIREMENTS |
| 12/30254902 DC : DRAFT JAN 2012 | BS EN 54-10 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 10: FLAME DETECTORS - POINT DETECTORS |
| 04/30110326 DC : DRAFT APR 2004 | EN 1870-17 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT CIRCULAR SAWING MACHINES WITH ONE SAW UNIT (MANUAL RADIAL ARM SAWS) |
| BS EN 61029-1 : 2009 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 15267-4:2017 | AIR QUALITY - CERTIFICATION OF AUTOMATED MEASURING SYSTEMS - PART 4: PERFORMANCE CRITERIA AND TEST PROCEDURES FOR AUTOMATED MEASURING SYSTEMS FOR PERIODIC MEASUREMENTS OF EMISSIONS FROM STATIONARY SOURCES |
| CEI EN 50050-1 : 2014 | ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 1: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE LIQUID COATING MATERIALS |
| DD CLC/TS 50467:2008 | Railway applications. Rolling stock. Electrical connectors, requirements and test methods |
| DD CLC/TS 50131-2-4:2004 | Alarm systems. Intrusion systems Requirements for combined passive infrared and microwave detectors |
| CEI EN 61812-1 : 2012 | TIME RELAYS FOR INDUSTRIAL AND RESIDENTIAL USE - PART 1: REQUIREMENTS AND TESTS |
| 09/30214233 DC : 0 | BS EN 50543 - ELECTRONIC PORTABLE AND TRANSPORTABLE APPARATUS DESIGNED TO DETECT AND MEASURE CARBON DIOXIDE AND/OR CARBON MONOXIDE IN INDOOR AMBIENT AIR - REQUIREMENTS AND TEST METHODS |
| 11/30237563 DC : 0 | BS EN 1870-10 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES |
| CEI EN 50541-1 : 2011 | THREE PHASE DRY-TYPE DISTRIBUTION TRANSFORMERS 50 HZ, FROM 100 KVA TO 3150 KVA, WITH HIGHEST VOLTAGE FOR EQUIPMENT NOT EXCEEDING 36 KV - PART 1: GENERAL REQUIREMENTS |
| CEI EN 50411-2-9 : 2011 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATIONS SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-9: NON-SEALED CLOSURES FOR AIR BLOWN FIBRE MICRODUCT CABLE, FOR CATEGORY S & A |
| BS EN 50050-3:2013 | Electrostatic hand-held spraying equipment. Safety requirements Hand-held spraying equipment for ignitable flock |
| 11/30238996 DC : 0 | BS EN 1648-1 - LEISURE ACCOMMODATION VEHICLES - 12 V DIRECT CURRENT EXTRA LOW VOLTAGE ELECTRICAL INSTALLATIONS - PART 1: CARAVANS |
| DIN EN 15420 E : NOV 2011 | GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT EXCEEDING 70 KW, BUT NOT EXCEEDING 1000 KW |
| UNE-EN 50176:2010 | Stationary electrostatic application equipment for ignitable liquid coating material - Safety requirements |
| I.S. EN 13637:2015 | BUILDING HARDWARE - ELECTRICALLY CONTROLLED EXIT SYSTEMS FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| BS EN 41003:2009 | Particular safety requirements for equipment to be connected to telecommunication networks and/or a cable distribution system |
| 11/30213786 DC : 0 | BS EN 50463-2 - RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 2: ENERGY MEASURING |
| 13/30252783 DC : 0 | BS EN 50502 - RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRIC EQUIPMENT IN TROLLEY BUSES - SAFETY REQUIREMENTS AND CONNECTION SYSTEMS |
| 04/30124466 DC : DRAFT OCT 2004 | EN 12405-1 - GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| 07/30174056 DC : 0 | BS EN 60065 - AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS |
| 14/30295634 DC : 0 | BS EN 16719 - TRANSPORT PLATFORMS |
| CEI EN 50131-2-7-1 : 2013 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-1: INTRUSION DETECTORS - GLASS BREAK DETECTORS (ACOUSTIC) |
| CEI EN 62282-3-100 : 2012 | FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY |
| CEI EN 61076-3-115 : 2012 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-115: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR PROTECTIVE HOUSINGS FOR USE WITH 8-WAY SHIELDED AND UNSHIELDED CONNECTORS FOR FREQUENCIES UP TO 600 MHZ FOR INDUSTRIAL ENVIRONMENTS INCORPORATING THE IEC 60603-7 SERIES INTERFACE - VARIANT 12 RELATED TO IEC 61076-3-106 - PUSH-PULL TYPE |
| EN 60077-2:2017 | Railway applications - Electric equipment for rolling stock - Part 2: Electrotechnical components - General rules |
| CEI CLC/TS 50537-4 : 2011 | RAILWAY APPLICATIONS - MOUNTED PARTS OF THE TRACTION TRANSFORMER AND COOLING SYSTEM - PART 4: GAS AND LIQUID ACTUATED (BUCHHOLZ) RELAY FOR LIQUID IMMERSED TRANSFORMERS AND REACTORS WITH CONSERVATOR FOR RAIL VEHICLES |
| 10/30214958 DC : 0 | BS EN 1915-1 - AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 1: BASIC SAFETY REQUIREMENTS |
| 01/713262 DC : DRAFT SEP 2001 | PREN 14268 - IRRIGATION TECHNIQUES - METRES FOR IRRIGATION WATER |
| BS 6121-5:1993 | Mechanical cable glands Code of practice for selection, installation and inspection of cable glands used in electrical installations |
| DIN EN 16191:2014-09 | TUNNELLING MACHINERY - SAFETY REQUIREMENTS |
| BS EN 50083-6:1998 | Cabled distribution systems for television and sound signals Optical equipment |
| NF EN 50206-2 : 2011 | RAILWAY APPLICATIONS - ROLLING STOCK - PANTOGRAPHS: CHARACTERISTICS AND TESTS - PART 2: PANTOGRAPHS FOR METRO AND LIGHT RAIL VEHICLES |
| 17/30347443 DC : DRAFT JUN 2017 | BS EN 12480 - GAS METERS - ROTARY DISPLACEMENT GAS METERS |
| 02/207304 DC : DRAFT AUG 2002 | PREN 50164-3 - LIGHTNING PROTECTION COMPONENTS (LPC) - PART 3: REQUIREMENTS FOR ISOLATING SPARK GAPS |
| 12/30262212 DC : 0 | BS EN 50516-3-1 - INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: TYPE ODVA APC TERMINATED ON EN 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY 1 (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN EN 50173-1 AND IEC 61753-1-3 |
| UNI EN 54-24 : 2008 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 24: COMPONENTS OF VOICE ALARM SYSTEMS - LOUDSPEAKERS |
| UNI EN 16327 : 2014 | FIRE-FIGHTING - POSITIVE-PRESSURE PROPORTIONING SYSTEMS (PPPS) AND COMPRESSED-AIR FOAM SYSTEMS (CAFS) |
| BS EN 16282-8:2017 | Equipment for commercial kitchens. Components for ventilation in commercial kitchens Installations for treatment of aerosol. Requirements and testing |
| BS EN 50303:2000 | Group I, Category M1 equipment intended to remain functional in atmospheres endangered by firedamp and/or coal dust |
| 08/30191664 DC : DRAFT OCT 2008 | BS EN 50522 - EARTHING OF POWER INSTALLATIONS EXCEEDING 1 KV A.C. |
| UNI CEN/TS 81-83 : 2009 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - EXISTING LIFTS - PART 83: RULES FOR THE IMPROVEMENT OF THE RESISTANCE AGAINST VANDALISM |
| NF EN 15001-1 : 2009 | GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING |
| BS EN 175301-801:2006 | Detail specification. High density rectangular connectors, round removable crimp contacts |
| BS EN 15094:2008 | Safety of machinery. Safety requirements for cold flat rolling mills |
| EN 115-1:2017 | Safety of escalators and moving walks - Part 1: Construction and installation |
| DIN EN 15220-1:2011-07 | RAILWAY APPLICATIONS - BRAKE INDICATORS - PART 1: PNEUMATICALLY OPERATED BRAKE INDICATORS |
| 00/541451 DC : DRAFT OCT 2000 | BS EN 12101-4 - SMOKE AND HEAT CONTROL SYSTEMS - PART 4: FIRE AND SMOKE CONTROL INSTALLATIONS - KITS |
| BS EN 50463:2007 | Railway applications. Energy measurement on board trains |
| 12/30260302 DC : 0 | BS EN 12268 - FOOD PROCESSING MACHINERY - BAND SAW MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| PD CEN/TR 16040:2010 | Electronic fee collection. Requirements for urban dedicated short-range communication |
| BS EN 50223:2015 | Stationary electrostatic application equipment for ignitable flock material. Safety requirements |
| BS EN 60601-1-1:2001 | Medical electrical equipment. General requirements for safety Collateral standard. Safety requirements for medical electrical systems |
| 17/30358216 DC : DRAFT AUG 2017 | BS EN 50131-2-10 - ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-10: INTRUSION DETECTORS - LOCK STATE CONTACTS (MAGNETIC) |
| VDE 0713-6 : 1994 COR 1 1995 | TRANSFORMERS FOR TUBULAR DISCHARGE LAMPS HAVING A NO-LOAD OUTPUT VOLTAGE EXCEEDING 1000 V (GENERALLY CALLED NEON-TRANSFORMERS) - GENERAL AND SAFETY REQUIREMENTS |
| 15/30328366 DC : 0 | BS EN 81-71 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS PARTICULAR APPLICATIONS TO PASSENGER LIFTS AND GOODS PASSENGER LIFTS - PART 71: VANDAL RESISTANT LIFTS |
| BS EN 50298:1999 | Empty enclosures for low-voltage switchgear and controlgear assemblies. General requirements |
| CEI EN 62052-21 : 2005 | ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 21: TARIFF AND LOAD CONTROL EQUIPMENT |
| BS EN 50015:1998 | Electrical apparatus for potentially explosive atmospheres. Oil immersion \'o\' |
| CEI EN 50379-2 : 2012 | SPECIFICATION FOR PORTABLE ELECTRICAL APPARATUS DESIGNED TO MEASURE COMBUSTION FLUE GAS PARAMETERS OF HEATING APPLIANCES - PART 2: PERFORMANCE REQUIREMENTS FOR APPARATUS USED IN STATUTORY INSPECTIONS AND ASSESSMENT |
| CEI EN 50123-1 : 2003 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SWITCHGEAR - PART 1: GENERAL |
| BS EN 50343 : 2014 | RAILWAY APPLICATIONS - ROLLING STOCK - RULES FOR INSTALLATION OF CABLING |
| BS EN 62534:2015 | Radiation protection instrumentation. Highly sensitive hand-held instruments for neutron detection of radioactive material |
| CEI CLC/TS 50131-2-11 : 1ED 2017 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-11: INTRUSION DETECTORS - ALDDR |
| 08/30183861 DC : DRAFT SEP 2008 | BS EN 13732 - FOOD PROCESSING MACHINERY - BULK MILK COOLERS ON FARM - REQUIREMENTS FOR PERFORMANCE, SAFETY AND HYGIENE |
| 12/30262929 DC : 0 | BS EN 15339-1 - THERMAL SPRAYING - SAFETY REQUIREMENTS FOR THERMAL SPRAYING EQUIPMENT - PART 1: GENERAL REQUIREMENTS |
| PREN 12966 : DRAFT 2013 | ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS |
| UNI EN 15220-1 : 2011 | RAILWAY APPLICATIONS - BRAKE INDICATORS - PART 1: PNEUMATICALLY OPERATED BRAKE INDICATORS |
| CEI EN 61032 : 1998 | PROTECTION OF PERSONS AND EQUIPMENT BY ENCLOSURES - PROBES FOR VERIFICATION |
| BS EN 50325-1:2002 | Industrial communication subsystem based on ISO 11898 (CAN) for controller-device interfaces General requirements |
| I.S. EN 50216-2:2002 | POWER TRANSFORMER AND REACTOR FITTINGS - PART 2: GAS AND OIL ACTUATED RELAY FOR LIQUID IMMERSED TRANSFORMERS AND REACTORS WITH CONSERVATOR |
| BS EN 50131-2-7-1 : 2012 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-1: INTRUSION DETECTORS - GLASS BREAK DETECTORS (PASSIVE) |
| PREN 16191 : DRAFT 2010 | TUNNELLING MACHINERY - SAFETY REQUIREMENTS |
| BS EN 61076-2-109:2014 | Connectors for electronic equipment. Product requirements Circular connectors. Detail specification for connectors with M 12 × 1 screw-locking, for data transmission frequencies up to 500 MHz |
| BS EN 50083-4:1999 | Cabled distribution systems for television and sound signals Passive wideband equipment for coaxial cable networks |
| 10/30203650 DC : 0 | BS EN 15684 - BUILDING HARDWARE - MECHATRONIC CYLINDERS FOR LOCKS - REQUIREMENTS AND TEST METHODS |
| 15/30331525 DC : 0 | BS EN 12098-5 - CONTROLS FOR HEATING SYSTEMS - PART 5: START-STOP SCHEDULERS FOR HEATING SYSTEMS - MODULES M3-5, 6, 7, 8 |
| 95/205853 DC : 0 | PRHD 630.3.1 - LOW VOLTAGE FUSES - PART 3-1: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY UNSKILLED PERSONS (FUSES MAINLY FOR HOUSEHOLD AND SIMILAR APPLICATIONS) |
| NF EN 61029-1 : 2009 AMD 11 2011 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 50216-12:2011 | POWER TRANSFORMER AND REACTOR FITTINGS - PART 12: FANS |
| 05/30133297 DC : DRAFT MAY 2005 | EN 859 - SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANING MACHINES |
| 04/301784 DC : DRAFT JAN 2004 | EN 848-2 - SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HANDFED/INTEGRATED FED ROUNTING MACHINES |
| 05/30138432 DC : DRAFT AUG 2005 | BS EN 1501-1 - REFUSE COLLECTION VEHICLES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 1: REAR LOADED REFUSE COLLECTION VEHICLES |
| UNE-EN 16716:2017 | Mountaineering equipment - Avalanche Airbag systems - Safety requirements and test methods |
| BS EN 61243-5:2001 | Live working. Voltage detectors Voltage detecting systems (VDS) |
| UNE-EN 16340:2015 | Safety and control devices for burners and appliances burning gaseous or liquid fuels - Combustion product sensing devices |
| 02/203342 DC : DRAFT FEB 2002 | PREN 50379-2 - SPECIFICATION FOR PORTABLE ELECTRICAL APPARATUS DESIGNED TO MEASURE COMBUSTION FLUE GAS PARAMETERS OF HEATING APPLIANCES - PART 2: PERFORMANCE REQUIREMENTS FOR APPARATUS USED IN STATUTORY INSPECTIONS AND ASSESSMENT |
| UNE-EN 15220:2017 | Railway applications - Brake indicators |
| 16/30208484 DC : 0 | BS EN 15654-2 - RAILWAY APPLICATIONS - MEASUREMENT OF VERTICAL FORCES ON WHEELS AND WHEELSETS - PART 2: TEST IN WORKSHOP FOR NEW, MODIFIED AND MAINTAINED VEHICLES |
| UNE-EN 1807-1:2013 | Safety of woodworking machines - Band sawing machines - Part 1: Table band saws and band re-saws |
| BS EN 50014:1998 | Electrical apparatus for potentially explosive atmospheres. General requirements |
| PD 6580-2:1995 | Home and building electronic systems. Technical report 1 Guidelines for the professional installation of Twisted Pair cables class 1 |
| UNE-EN 62549:2012 | Articulated systems and flexible systems for cable guiding |
| DIN 57128 : 1981 | |
| UNI EN 15859 : 2010 | AIR QUALITY - CERTIFICATION OF AUTOMATED DUST ARRESTMENT PLANT MONITORS FOR USE ON STATIONARY SOURCES - PERFORMANCE CRITERIA AND TEST PROCEDURES |
| DIN EN 61050 : 1994 COR 1 1995 | TRANSFORMERS FOR TUBULAR DISCHARGE LAMPS HAVING A NO-LOAD OUTPUT VOLTAGE EXCEEDING 1000 V (GENERALLY CALLED NEON-TRANSFORMERS) - GENERAL AND SAFETY REQUIREMENTS |
| PREN 12098-1 : DRAFT 2015 | CONTROLS FOR HEATING SYSTEMS - PART 1: CONTROL EQUIPMENT FOR HOT WATER HEATING SYSTEMS - MODULES M3-5, 6, 7, 8 |
| DIN EN 50091-1-1 : 1997 | |
| BS EN 50107-2:2005 | Signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV Requirements for earth-leakage and open-circuit protective devices |
| EN 50463-2:2017 | Railway applications - Energy measurement on board trains - Part 2: Energy measuring |
| PREN 50463-1 : DRAFT 2015 | RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 1: GENERAL |
| BS EN 60974-7:2013 | Arc welding equipment Torches |
| EN 61534-1:2011/A1:2014 | POWERTRACK SYSTEMS - PART 1: GENERAL REQUIREMENTS (IEC 61534-1:2011/A1:2014) |
| UNE-EN 62676-1-1:2015 | Video surveillance systems for use in security applications - Part 1-1: System requirements - General |
| I.S. EN 12098-1:2017 | ENERGY PERFORMANCE OF BUILDINGS - CONTROLS FOR HEATING SYSTEMS - PART 1: CONTROL EQUIPMENT FOR HOT WATER HEATING SYSTEMS - MODULES M3-5, 6, 7, 8 |
| UNE-EN 62271-103:2012 | High-voltage switchgear and controlgear - Part 103: Switches for rated voltages above 1 kV up to and including 52 kV |
| EN 16252:2012 | Machines for compacting waste materials or recyclable fractions - Horizontal baling presses - Safety requirements |
| I.S. EN 14033-3:2017 | RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS |
| PREN 12779 : DRAFT 2014 | SAFETY OF WOODWORKING MACHINES - CHIPS AND DUST EXTRACTION SYSTEMS WITH FIXED INSTALLATIONS - SAFETY REQUIREMENTS |
| UNI EN 15714-3 : 2009 | INDUSTRIAL VALVES - ACTUATORS - PART 3: PNEUMATIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| I.S. EN 1474-1:2008 | INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS |
| BS EN 62080 : 2009 | SOUND SIGNALLING DEVICES FOR HOUSEHOLD AND SIMILAR PURPOSES |
| UNI EN 13976-2 : 2011 | RESCUE SYSTEMS - TRANSPORTATION OF INCUBATORS - PART 2: SYSTEM REQUIREMENTS |
| NF EN 15746-2 : 2010 + A1 2011 | RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| PREN 1463-3 : DRAFT 2017 | ROAD MARKING MATERIALS - PART 3: ACTIVE ROAD STUDS |
| EN IEC 61076-2-111:2018 | Connectors for electrical and electronic equipment - Product requirements - Part 2-111: Circular connectors - Detail specification for power connectors with M12 screw-locking |
| PREN 12830 : DRAFT 2017 | TEMPERATURE RECORDERS FOR THE TRANSPORT, STORAGE AND DISTRIBUTION OF TEMPERATURE SENSITIVE GOODS - TESTS, PERFORMANCE, SUITABILITY |
| UNE-EN 62208:2012 | Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements |
| DIN EN 50133-2-1 : 2001 | ALARM SYSTEMS - ACCESS CONTROL SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 2-1: GENERAL REQUIREMENTS FOR COMPONENTS |
| BS EN 61526:2013 | Radiation protection instrumentation. Measurement of personal dose equivalents Hp(10) and Hp(0,07) for X, gamma, neutron and beta radiations. Direct reading personal dose equivalent meters |
| EN 50131-2-2:2017 | Alarm systems - Intrusion and hold-up systems - Part 2-2: Intrusion detectors - Passive infrared detectors |
| NF EN 50133-2-1 : 2001 | ALARM SYSTEMS - ACCESS CONTROL SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 2-1: GENERAL REQUIREMENTS FOR COMPONENTS |
| BS EN 14958 : 2006 | FOOD PROCESSING MACHINERY - MACHINERY FOR GRINDING AND PROCESSING FLOUR AND SEMOLINA - SAFETY AND HYGIENE REQUIREMENTS |
| UNE-EN 1870-6:2003 | Safety of woodworking machines. Circular sawing machines. Part 6: Circular sawing machines for firewood and dual purpose circular sawing machines for firewood/circular saw benches, with manual loading and/or unloading. |
| ONORM EN 14236 : 2008 | ULTRASONIC DOMESTIC GAS METERS |
| EN IEC 62688:2018 | Concentrator photovoltaic (CPV) modules and assemblies - Safety qualification |
| I.S. EN 60335-2-99:2003/A1:2019 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-99: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC HOODS |
| I.S. EN 62560:2012/A11:2019 | SELF-BALLASTED LED-LAMPS FOR GENERAL LIGHTING SERVICES BY VOLTAGE > 50 V - SAFETY SPECIFICATIONS |
| I.S. EN 60898-1:2003 | ELECTRICAL ACCESSORIES - CIRCUIT BREAKERS FOR OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR INSTALLATIONS - PART 1: CIRCUIT-BREAKERS FOR A.C. OPERATION (IEC 60898-1:2002 (MOD)) |
| I.S. EN 62820-1-1:2016 | BUILDING INTERCOM SYSTEMS - PART 1-1: SYSTEM REQUIREMENTS - GENERAL |
| S.R. CLC/TS 50131-2-9:2016 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-9: INTRUSION DETECTORS - ACTIVE INFRARED BEAM DETECTORS |
| I.S. EN 50091-1-2:2003 | |
| CEI EN 50516-2-1 : 2012 | INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-1: TYPE ODVA PC INDUSTRIAL TERMINATED ON EN 60793-2-10 CATEGORY A1A AND A1B MULTIMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY 1 (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN EN 50173-1 AND IEC 61753-1-3 |
| I.S. EN 61643-11:2012 | LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 11: SURGE PROTECTIVE DEVICES CONNECTED TO LOW-VOLTAGE POWER SYSTEMS - REQUIREMENTS AND TESTS METHODS |
| I.S. EN 50131-3:2009 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 3: CONTROL AND INDICATING EQUIPMENT |
| UNI EN 1807-2 : 2013 | SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 2: LOG SAWING MACHINES |
| I.S. EN 60846-1:2014 | RADIATION PROTECTION INSTRUMENTATION - AMBIENT AND/OR DIRECTIONAL DOSE EQUIVALENT (RATE) METERS AND/OR MONITORS FOR BETA, X AND GAMMA RADIATION - PART 1: PORTABLE WORKPLACE AND ENVIRONMENTAL METERS AND MONITORS |
| I.S. EN 50050-2:2013 | ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 2: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE COATING POWDER |
| I.S. EN 60335-2-59:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-59: PARTICULAR REQUIREMENTS FOR INSECT KILLERS |
| I.S. EN 60947-5-3:2013 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-3: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - REQUIREMENTS FOR PROXIMITY DEVICES WITH DEFINED BEHAVIOUR UNDER FAULT CONDITIONS (PDDB) |
| PREN 50411-4-1 : DRAFT 2017 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 4-1: PASSIVE OPTICAL STREET CABINET FOR CATEGORY A |
| CEI CLC/TS 50537-1 : 2011 | RAILWAY APPLICATIONS - MOUNTED PARTS OF THE TRACTION TRANSFORMER AND COOLING SYSTEM - PART 1: HV BUSHING FOR TRACTION TRANSFORMERS |
| I.S. EN 62752:2016/AC:2019-03 | IN-CABLE CONTROL AND PROTECTION DEVICE FOR MODE 2 CHARGING OF ELECTRIC ROAD VEHICLES (IC-CPD) |
| I.S. EN 15339-2:2007 | THERMAL SPRAYING - SAFETY REQUIREMENTS FOR THERMAL SPRAYING EQUIPMENT - PART 2: GAS CONTROL UNITS |
| PREN 12178 : DRAFT 2016 | REFRIGERATING SYSTEMS AND HEAT PUMPS - LIQUID LEVEL INDICATING DEVICES - REQUIREMENTS, TESTING AND MARKING |
| VDE 0544-201 : 1996 | ARC WELDING EQUIPMENT - PART 11: ELECTRODE HOLDERS |
| I.S. EN 12405-3:2015 | GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER |
| BS EN 60335-1 : 2012 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED) |
| UNI EN 15420 : 2011 | GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT EXCEEDING 70 KW, BUT NOT EXCEEDING 1000 KW |
| EN 13060:2014 | Small steam sterilizers |
| BS EN 61076-2-101:2012 | Connectors for electronic equipment. Product requirements Circular connectors. Detail specification for M12 connectors with screw-locking |
| I.S. EN 61076-2-109:2014 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-109: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CONNECTORS WITH M 12 X 1 SCREW-LOCKING, FOR DATA TRANSMISSION FREQUENCIES UP TO 500 MHZ |
| I.S. EN 15163:2017 | MACHINES AND INSTALLATIONS FOR THE EXPLOITATION AND PROCESSING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR DIAMOND WIRE SAWS |
| I.S. EN 50083-5:2001 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 5: HEADEND EQUIPMENT |
| BS EN 62271-1:2017 | High-voltage switchgear and controlgear Common specifications for alternating current switchgear and controlgear |
| I.S. EN 3660-063:2015 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 063: CABLE OUTLET, STYLE K, STRAIGHT, FOR HEAT SHRINKABLE BOOT, SHIELDED, SEALED, SELF-LOCKING FOR EN 3645 - PRODUCT STANDARD |
| I.S. EN 60601-1-12:2015 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-12: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS INTENDED FOR USE IN THE EMERGENCY MEDICAL SERVICES ENVIRONMENT |
| S.R. CLC/TS 50131-2-11:2017 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-11: INTRUSION DETECTORS - ALDDR |
| I.S. EN 60077-1:2017 | RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 1: GENERAL SERVICE CONDITIONS AND GENERAL RULES |
| I.S. EN 50050:2006 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT |
| I.S. EN 14958:2006 | FOOD PROCESSING MACHINERY - MACHINERY FOR GRINDING AND PROCESSING FLOUR AND SEMOLINA - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 50502:2015 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRIC EQUIPMENT IN TROLLEY BUSES - SAFETY REQUIREMENTS AND CURRENT COLLECTION SYSTEMS |
| BS EN 50173-1:2011 | Information technology. Generic cabling systems General requirements |
| BS EN 60934 : 2001 | CIRCUIT-BREAKERS FOR EQUIPMENT (CBE) |
| I.S. EN ISO 18081:2016 | NON-DESTRUCTIVE TESTING - ACOUSTIC EMISSION TESTING (AT) - LEAK DETECTION BY MEANS OF ACOUSTIC EMISSION (ISO 18081:2016) |
| PREN 14175-2 : DRAFT 2001 | FUME CUPBOARDS - PART 2: SAFETY AND PERFORMANCE REQUIREMENTS |
| I.S. EN 50065-4-7:2005 | SIGNALLING ON LOW-VOLTAGE ELECTRICAL INSTALLATIONS IN THE FREQUENCY RANGE 3 KHZ TO 148,5 KHZ AND 1,6 MHZ TO 30 MHZ - PART 4-7: PORTABLE LOW VOLTAGE DECOUPLING FILTERS - SAFETY REQUIREMENTS |
| PREN 26 : DRAFT 2012 | GAS-FIRED INSTANTANEOUS WATER HEATERS FOR THE PRODUCTION OF DOMESTIC HOT WATER |
| I.S. EN 60601-1-1:2001 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-1: GENERAL REQUIREMENTS FOR SAFETY - COLLATERAL STANDARD: SAFETY REQUIREMENTS FOR MEDICAL ELECTRICAL SYSTEMS |
| VDE 0510-2 : 2001 | SAFETY REQUIREMENTS FOR SECONDARY BATTERIES AND BATTERY INSTALLATIONS - PART 2: STATIONARY BATTERIES |
| I.S. EN 60601-1:2006&A1:2013&AC:2014&A12:2014 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE |
| I.S. EN 62115:2006 | ELECTRIC TOYS - SAFETY(IEC 62115:2003 (MOD) + A1:2004 (EQV)) |
| I.S. EN 61526:2013 | RADIATION PROTECTION INSTRUMENTATION - MEASUREMENT OF PERSONAL DOSE EQUIVALENTS H[P](10) AND H[P](0,07) FOR X, GAMMA, NEUTRON AND BETA RADIATIONS - DIRECT READING PERSONAL DOSE EQUIVALENT METERS (IEC 61526:2010 (MOD)) |
| I.S. EN 12405-1:2005 | GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| I.S. EN 50018:2001 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - FLAMEPROOF ENCLOSURE "D" |
| I.S. EN 50286:1999 | ELECTRICAL INSULATING PROTECTIVE CLOTHING FOR LOW-VOLTAGE INSTALLATIONS |
| UNI EN 415-10 : 2014 | SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS |
| I.S. EN 16743:2016 | FOOD PROCESSING MACHINERY - AUTOMATIC INDUSTRIAL SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 50174-3:2013 | INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS |
| I.S. EN 50543:2011 | ELECTRONIC PORTABLE AND TRANSPORTABLE APPARATUS DESIGNED TO DETECT AND MEASURE CARBON DIOXIDE AND/OR CARBON MONOXIDE IN INDOOR AMBIENT AIR - REQUIREMENTS AND TEST METHODS |
| UNE-EN 15091:2014 | Sanitary tapware - Electronic opening and closing sanitary tapware |
| I.S. EN 60439-5:2006 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 5: PARTICULAR REQUIREMENTS FOR ASSEMBLIES FOR POWER DISTRIBUTION IN PUBLIC NETWORKS |
| I.S. EN 60335-2-26:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-26: PARTICULAR REQUIREMENTS FOR CLOCKS |
| I.S. EN 14236:2007 | ULTRASONIC DOMESTIC GAS METERS |
| 16/30338566 DC : 2016-06 | BS EN 13379 - PASTA PROCESSING PLANT - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR - SAFETY AND HYGIENE REQUIREMENTS |
| PREN 50630 : DRAFT 2014 | BS EN 50630 - TIME-DELAYED RESIDUAL CURRENT OPERATED CIRCUIT BREAKERS TYPE M WITHOUT OVER-CURRENT PROTECTION OR APPLICATION IN CIRCUITS WITH RATED CURRENTS GREATER ABOVE 32 A |
| EN 12098-1:2017 | Energy Performance of Buildings - Controls for heating systems - Part 1: Control equipment for hot water heating systems - Modules M3-5, 6, 7, 8 |
| I.S. EN 61557-12:2008 | ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 12: PERFORMANCE MEASURING AND MONITORING DEVICES (PMD) |
| BS EN 60335-2-50 : 2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-50: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC BAINS-MARIE |
| UNI EN 81-71 : 2009 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PARTICULAR APPLICATIONS TO PASSENGER LIFTS AND GOODS PASSENGER LIFTS - PART 71: VANDAL RESISTANT LIFTS |
| CLC/TS 50457-1:2008 | Conductive charging for electric vehicles - Part 1: D.C. charging station |
| CEI EN 50411-3-1 : 2013 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: FIBRE MANAGEMENT SYSTEM, SPLICE WALL BOX, FOR CATEGORY C & G |
| DIN EN 13976-2:2016-03 (Draft) | RESCUE SYSTEMS - TRANSPORTATION OF INCUBATORS - PART 2: SYSTEM REQUIREMENTS |
| NF EN 81-41 : 2011 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 41: VERTICAL LIFTING PLATFORMS INTENDED FOR USE BY PERSONS WITH IMPAIRED MOBILITY |
| BS EN 61184:2017 | Bayonet lampholders |
| I.S. EN 81-40:2008 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 40: STAIRLIFTS AND INCLINED LIFTING PLATFORMS INTENDED FOR PERSONS WITH IMPAIRED MOBILITY |
| BS EN 61812-1:2011 | Time relays for industrial and residential use Requirements and tests |
| I.S. EN IEC 61204-7:2018 | LOW-VOLTAGE SWITCH MODE POWER SUPPLIES - PART 7: SAFETY REQUIREMENTS |
| I.S. EN 15220:2016 | RAILWAY APPLICATIONS - BRAKE INDICATORS |
| CEI EN 50125-1 : 2014 | RAILWAY APPLICATIONS - ENVIRONMENTAL CONDITIONS FOR EQUIPMENT - PART 1: ROLLING STOCK AND ON-BOARD EQUIPMENT |
| I.S. EN 50348:2010 | STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR NON-IGNITABLE LIQUID COATING MATERIAL - SAFETY REQUIREMENTS |
| BS EN 15869-3:2010 | Inland navigation vessels. Electrical shore connection, three phase current 400 V, up to 63 A, 50 Hz On-board unit, safety requirements |
| UNI EN 81-31 : 2010 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF GOODS ONLY - PART 31: ACCESSIBLE GOODS ONLY LIFTS |
| PREN 13160-5 : DRAFT 2014 | LEAK DETECTION SYSTEMS - PART 5: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR IN-TANK GAUGE SYSTEMS AND PRESSURISED PIPEWORK SYSTEMS |
| CEI EN 50381 : 2006 | TRANSPORTABLE VENTILATED ROOMS WITH OR WITHOUT AN INTERNAL SOURCE OF RELEASE |
| UNE-EN 1829-1:2010 | High pressure water jet machines - Safety requirements - Part 1: Machines |
| PREN 12184 : DRAFT 2011 | ELECTRICALLY POWERED WHEELCHAIRS, SCOOTERS AND THEIR CHARGERS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 45510-2-7:2002 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-7: ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR |
| I.S. EN 61036:1997 | ALTERNATING CURRENT STATIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 1 AND 2) |
| UNE-EN 62790:2015 | Junction boxes for photovoltaic modules - Safety requirements and tests |
| I.S. EN 50541-1:2011 | THREE PHASE DRY-TYPE DISTRIBUTION TRANSFORMERS 50 HZ, FROM 100 KVA TO 3150 KVA, WITH HIGHEST VOLTAGE FOR EQUIPMENT NOT EXCEEDING 36 KV - PART 1: GENERAL REQUIREMENTS |
| BS EN 60079-15:2010 | Explosive atmospheres Equipment protection by type of protection \'n\' |
| 17/30364300 DC : 0 | BS EN 81-40 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 40: STAIRLIFTS AND INCLINED LIFTING PLATFORMS INTENDED FOR PERSONS WITH IMPAIRED MOBILITY |
| I.S. EN 12013:2018 | PLASTICS AND RUBBER MACHINES - INTERNAL MIXERS - SAFETY REQUIREMENTS |
| PREN 50541-1 : DRAFT 2009 | THREE PHASE DRY-TYPE DISTRIBUTION TRANSFORMERS 50 HZ, FROM 100 TO 3150 KVA, WITH HIGHEST VOLTAGE FOR EQUIPMENT NOT EXCEEDING 36 KV - PART 1: GENERAL REQUIREMENTS AND REQUIREMENTS FOR DRY TYPE TRANSFORMERS WITH HIGHEST VOLTAGE FOR EQUIPMENT NOT EXCEEDING 36 KV |
| I.S. EN 62561-6:2011 | LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 6: REQUIREMENTS FOR LIGHTNING STRIKE COUNTERS (LSC) (IEC 62561-6:2011, MODIFIED) |
| I.S. EN 50588-4:2018 | MEDIUM POWER TRANSFORMERS 50 HZ, WITH HIGHEST VOLTAGE FOR EQUIPMENT NOT EXCEEDING 36 KV - PART 4: TRANSFORMERS WITH CABLE BOXES ON THE HIGH-VOLTAGE AND/OR LOW-VOLTAGE SIDE - CABLE BOXES TYPE 2 FOR USE ON TRANSFORMERS MEETING THE REQUIREMENTS OF EN 50588-2 |
| NF EN 50556 : 2011 | ROAD TRAFFIC SIGNAL SYSTEMS |
| EN 15654-1:2018 | Railway applications - Measurement of vertical forces on wheels and wheelsets - Part 1: On-track measurement sites for vehicles in service |
| PREN 12978 : DRAFT 2017 | INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY DEVICES FOR POWER OPERATED DOORS AND GATES - REQUIREMENTS AND TEST METHODS |
| I.S. EN 1501-5:2011 | REFUSE COLLECTION VEHICLES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 5: LIFTING DEVICES FOR REFUSE COLLECTION VEHICLES |
| PREN 50174-3 : DRAFT 2012 | INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS |
| HD 62640:2015/A11:2016 | RESIDUAL CURRENT DEVICES WITH OR WITHOUT OVERCURRENT PROTECTION FOR SOCKET-OUTLETS FOR HOUSEHOLD AND SIMILAR USES (IEC 62640:2011, MODIFIED) |
| PREN 1870-10 : DRAFT 2011 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES |
| UNE-EN 16282-3:2017 | Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 3: Kitchen ventilation ceilings; Design and safety requirements |
| PREN 16985 : DRAFT 2016 | SPRAY BOOTHS FOR ORGANIC COATING MATERIAL - SAFETY REQUIREMENTS |
| EN 50173-1:2011 | Information technology - Generic cabling systems - Part 1: General requirements |
| PREN 609-1 : DRAFT 2014 | AGRICULTURAL AND FORESTRY MACHINERY - SAFETY OF LOG SPLITTERS - PART 1: WEDGE SPLITTERS |
| PREN 50059 : DRAFT 2011 | ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - HAND-HELD SPRAYING EQUIPMENT FOR NON-IGNITABLE COATING MATERIALS |
| CLC/TS 50537-4:2010 | Railway applications - Mounted parts of the traction transformer and cooling system - Part 4: Gas and liquid actuated (Buchholz) relay for liquid immersed transformers and reactors with conservator for rail vehicles |
| S.R. CLC/TS 61643-12:2009 | LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 12: SURGE PROTECTIVE DEVICES CONNECTED TO LOW-VOLTAGE POWER DISTRIBUTION SYSTEMS - SELECTION AND APPLICATION PRINCIPLES |
| PREN 15597-1 : DRAFT 2017 | WINTER MAINTENANCE EQUIPMENT - SPREADING MACHINES (GRITTING MACHINES) - PART 1: GENERAL REQUIREMENTS AND DEFINITIONS FOR SPREADING MACHINES |
| UNE-EN 1870-14:2008 | Safety of woodworking machines - Circular sawing machines - Part 14: Vertical panel sawing machines |
| PREN 1648-2 : DRAFT 2017 | LEISURE ACCOMMODATION VEHICLES - 12 V DIRECT CURRENT EXTRA LOW VOLTAGE ELECTRICAL INSTALLATIONS - PART 2: MOTOR CARAVANS |
| I.S. EN 16282-3:2016 | EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 3: KITCHEN VENTILATION CEILINGS - DESIGN AND SAFETY REQUIREMENTS |
| CEI EN 61076-2-105 : 2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-105: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR M5 CONNECTORS WITH SCREW-LOCKING |
| UNE-EN 15220-1:2009 | Railway applications - Brake indicators - Part 1: Pneumatically operated brake indicators |
| EN 62271-200:2012/AC:2015 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 200: AC METAL-ENCLOSED SWITCHGEAR AND CONTROLGEAR FOR RATED VOLTAGES ABOVE 1 KV AND UP TO AND INCLUDING 52 KV (IEC 62271-200:2011) |
| PREN 1459-1 : DRAFT 2014 | ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 1: VARIABLE-REACH TRUCKS |
| UNI EN 54-16 : 2008 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 16: VOICE ALARM CONTROL AND INDICATING EQUIPMENT |
| PREN 50107-3 : DRAFT 2016 | PRODUCT STANDARD COVERING LUMINOUS SIGNS WITH DISCHARGE LAMPS AND/OR LED (LIGHT EMITTING DIODES) AND/OR EL (ELECTROLUMINESCENT) LIGHTSOURCES WITH A NOMINAL VOLTAGE NOT EXCEEDING 1000 V, WITH THE EXCLUSION OF GENERAL LIGHTING, TRAFFIC- OR EMERGENCY RELATED PURPOSE |
| EN 60335-2-48 : 2003 AMD 11 2012 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-48: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC GRILLERS AND TOASTERS (IEC 60335-2-48:2002) |
| EN 15500-1:2017 | Energy Performance of Buildings - Control for heating, ventilating and air conditioning applications - Part 1: Electronic individual zone control equipment - Modules M3-5, M4-5, M5-5 |
| EN 16932-1:2018 | Drain and sewer systems outside buildings - Pumping systems - Part 1: General requirements |
| EN 50465 : 2015 | GAS APPLIANCES - COMBINED HEAT AND POWER APPLIANCE OF NOMINAL HEAT INPUT INFERIOR OR EQUAL TO 70 KW |
| I.S. EN 15162:2008 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY REQUIREMENTS FOR GANG SAWS |
| I.S. EN 62026-3:2015 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 3: DEVICENET |
| I.S. EN 50463:2007 | RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS |
| I.S. EN 50300:2004 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - GENERAL REQUIREMENTS FOR LOW-VOLTAGE SUBSTATION CABLE DISTRIBUTION BOARDS |
| I.S. EN 50191:2010 | ERECTION AND OPERATION OF ELECTRICAL TEST EQUIPMENT |
| I.S. EN 50464-2-2:2007 | THREE-PHASE OIL-IMMERSED DISTRIBUTION TRANSFORMERS 50 HZ, FROM 50 KVA TO 2 500 KVA WITH HIGHEST VOLTAGE FOR EQUIPMENT NOT EXCEEDING 36 KV - PART 2-2: DISTRIBUTION TRANSFORMERS WITH CABLE BOXES ON THE HIGH-VOLTAGE AND/OR LOW-VOLTAGE SIDE - CABLE BOXES TYPE 1 FOR USE ON DISTRIBUTION TRANSFORMERS MEETING THE REQUIREMENTS OF EN 50464-2-1 |
| I.S. EN 15194:2017 | CYCLES - ELECTRICALLY POWER ASSISTED CYCLES - EPAC BICYCLES |
| DIN EN 13862:2010-03 | Floor cutting-off machines - Safety (includes Amendment A1:2009) |
| I.S. EN 50153:2014 | RAILWAY APPLICATIONS - ROLLING STOCK - PROTECTIVE PROVISIONS RELATING TO ELECTRICAL HAZARDS |
| I.S. EN 60335-2-91:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-91: PARTICULAR REQUIREMENTS FOR WALK-BEHIND AND HAND-HELD LAWN TRIMMERS AND LAWN EDGE TRIMMERS |
| EN 60335-2-16:2003/A2:2012 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-16: PARTICULAR REQUIREMENTS FOR FOOD WASTE DISPOSERS (IEC 60335-2-16:2002/A2:2011) |
| I.S. EN 60838-2-1:1997 | MISCELLANEOUS LAMPHOLDERS - PART 2: PARTICULAR REQUIREMENTS - SECTION 1: LAMPHOLDERS S14 |
| S.R. CLC/TS 50131-2-10:2014 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-10: INTRUSION DETECTORS - LOCK STATE CONTACTS (MAGNETIC) |
| I.S. EN 61310-2:2008 | SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 2: REQUIREMENTS FOR MARKING |
| S.R. CEN/TS 16134:2011 | CHIMNEY TERMINALS - GENERAL REQUIREMENTS AND MATERIAL INDEPENDENT TEST METHODS |
| I.S. EN 60335-2-80:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-80: PARTICULAR REQUIREMENTS FOR FANS |
| I.S. EN 14886:2008 | PLASTICS AND RUBBER MACHINES - BANDKNIFE CUTTING MACHINES FOR BLOCK FOAMS - SAFETY REQUIREMENTS |
| I.S. EN 60204-1:2006 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 13611:2015 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| I.S. EN 61386-23:2004 | CONDUIT SYSTEMS FOR CABLE MANAGEMENT - PART 23: PARTICULAR REQUIREMENTS - FLEXIBLE CONDUIT SYSTEMS |
| I.S. EN 50380:2017 | MARKING AND DOCUMENTATION REQUIREMENTS FOR PHOTOVOLTAIC MODULES |
| DIN EN 1870-11:2014-02 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS) |
| DIN EN 746-2:2011-02 | Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems |
| EEMUA 186 : 2016 | A PRACTITIONER'S HANDBOOK FOR POTENTIALLY EXPLOSIVE ATMOSPHERES |
| DIN EN 13463-3:2005-07 | NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 3: PROTECTION BY FLAMEPROOF ENCLOSURE 'D' |
| DIN EN 12750:2013-05 | Safety of woodworking machines - Four sided moulding machines |
| UNI EN 1501-2 : 2010 | REFUSE COLLECTION VEHICLES AND ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 2: SIDE LOADED REFUSE COLLECTION VEHICLES |
| DIN EN 1247:2010-12 | Foundry machinery - Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi continous casting machines (includes Amendment A1:2010) |
| DIN EN 12348:2010-01 | Core drilling machines on stand - Safety (includes Amendment A1:2009) |
| DIN EN 60598-2-4 : 1998 | LUMINAIRES - PART 2: PARTICULAR REQUIREMENTS - SECTION 4: PORTABLE GENERAL PURPOSE LUMINAIRES |
| DIN EN 13208:2011-02 | Food processing machinery - Vegetable peelers - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN 1870-17:2015-06 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS) |
| DIN EN 12853:2012-02 | Food processing machinery - Hand-held blenders and whisks - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN 12622:2014-02 | Safety of machine tools - Hydraulic press brakes (includes Amendment A1:2013) |
| DIN EN 12094-10:2003-09 | Fixed firefighting systems - Components for gas extinguishing systems - Part 10: Requirements and test methods for pressure gauges and pressure switches; German version EN 12094-10:2003 |
| DIN EN 12547:2014-12 | CENTRIFUGES - COMMON SAFETY REQUIREMENTS |
| DIN EN 12649:2011-09 | Concrete compactors and smoothing machines - Safety |
| DIN EN 1870-15:2013-01 | Safety of woodworking machines - Circular sawing machines - Part 15: Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading |
| DIN EN 1808:2015-08 | Safety requirements for suspended access equipment - Design calculations, stability criteria, construction - Examinations and tests |
| DIN EN 12352:2015-02 (Draft) | Traffic control equipment - Warning and safety light devices; German version prEN 12352:2014 |
| DIN EN 12505:2010-11 | Food processing machinery - Centrifugal machines for processing edible oils and fats - Safety and hygiene requirements (includes Amendment A1:2009) |
| DIN EN 12355:2011-02 | Food processing machinery - Derinding-, skinning- and membrane removal machines - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN 12178:2016-05 (Draft) | REFRIGERATING SYSTEMS AND HEAT PUMPS - LIQUID LEVEL INDICATING DEVICES - REQUIREMENTS, TESTING AND MARKING |
| DIN EN 12854:2010-12 | Food processing machinery - Beam mixers - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN 12158-2:2011-04 | Builders' hoists for goods - Part 2: Inclined hoists with non-accessible load carrying devices (includes Amendment A1:2010) |
| DIN EN 12717:2009-07 | SAFETY OF MACHINE TOOLS - DRILLING MACHINES |
| DIN EN 13113:2011-05 | Tannery machines - Roller coating machines - Safety requirements (includes Amendment A1:2010) |
| DIN EN 13060:2015-03 | SMALL STEAM STERILIZERS |
| DIN EN 12779:2016-03 | Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements |
| DIN EN 848-3:2013-01 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOLS - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES |
| DIN EN 860:2012-09 | SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANING MACHINES |
| DIN EN 13954:2010-12 | Food processing machinery - Bread slicers - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN 12067-2:2015-12 (Draft) | GAS/AIR RATIO CONTROLS FOR GAS BURNERS AND GAS BURNING APPLIANCES - PART 2: ELECTRONIC TYPES |
| DIN EN 81-72:2015-06 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PARTICULAR APPLICATIONS FOR PASSENGER AND GOODS PASSENGER LIFTS - PART 72: FIREFIGHTERS LIFTS |
| DIN EN 13736:2009-11 | SAFETY OF MACHINE TOOLS - PNEUMATIC PRESSES |
| DIN EN 848-1:2013-01 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 1: SINGLE SPINDLE VERTICAL MOULDING MACHINES |
| DIN EN 13718-1:2014-12 | MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS FOR MEDICAL DEVICES USED IN AIR AMBULANCES |
| DIN EN 13870:2015-12 | Food processing machinery - Portion cutting machines - Safety and hygiene requirements |
| DIN EN 161:2013-04 | Automatic shut-off valves for gas burners and gas appliances (includes Amendment A3:2013) |
| DIN EN 422:2009-10 | PLASTICS AND RUBBER MACHINES - BLOW MOULDING MACHINES - SAFETY REQUIREMENTS |
| DIN EN 454:2015-02 | Food processing machinery - Planetary mixers - Safety and hygiene requirements |
| DIN EN 676:2012-03 (Draft) | AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS |
| DIN EN 848-2:2013-01 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HAND FED/INTEGRATED FED ROUTING MACHINES |
| DIN EN 12050-1:2015-05 | WASTEWATER LIFTING PLANTS FOR BUILDINGS AND SITES - PART 1: LIFTING PLANTS FOR WASTEWATER CONTAINING FAECAL MATTER |
| DIN EN 13885:2011-02 | Food processing machinery - Clipping machines - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN 13985:2009-11 | Machine tools - Safety - Guillotine shears (includes Amendment A1:2009) |
| DIN EN 741:2011-06 | Continuous handling equipment and systems - Safety requirements for systems and their components for pneumatic handling of bulk materials (includes Amendment A1:2010) |
| DIN EN 12514-2:2009-06 (Draft) | INSTALLATIONS FOR OIL SUPPLY SYSTEMS FOR OIL BURNERS - PART 2: SAFETY REQUIREMENTS AND TESTS - PARTS, VALVES PIPES, FILTERS, OIL DE-AERATORS, METERS |
| DIN EN 12050-3:2015-08 | WASTEWATER LIFTING PLANTS FOR BUILDINGS AND SITES - PART 3: LIFTING PLANTS FOR LIMITED APPLICATIONS |
| DIN EN 14394:2008-12 | HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C |
| DIN EN 14543:2013-11 (Draft) | SPECIFICATION FOR DEDICATED LIQUEFIED PETROLEUM GAS APPLIANCES - PARASOL PATIO HEATERS - FLUELESS RADIANT HEATERS FOR OUTDOOR OR AMPLY VENTILATED AREA USE |
| DIN EN 620:2011-07 | Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials (includes Amendment A1:2010) |
| BS EN 1074-1:2000 | Valves for water supply. Fitness for purpose requirements and appropriate verification tests General requirements |
| UNE-EN 15001-1:2010 | Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
| UNE-EN 61347-1:2016 | Lamp controlgear - Part 1: General and safety requirements |
| BS EN 12752-1:1999 | Gas-fired type B tumble dryers of nominal heat input not exceeding 20 kW Safety |
| UNE-EN 62271-202:2015 | High-voltage switchgear and controlgear - Part 202: High-voltage/low-voltage prefabricated substation |
| BS EN 115:1995 | Safety rules for the construction and installation of escalators and passenger conveyors. |
| BS EN 12478:2001 | Safety of machine tools. Large numerically controlled turning machines and turning centres |
| UNE-EN 15954-2:2014 | Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements |
| BS EN 909 : 1999 | AGRICULTURAL AND FORESTRY MACHINERY - CENTRE PIVOT AND MOVING LATERAL TYPES IRRIGATION MACHINES - SAFETY |
| BS EN 12201-3 : 2011 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 3: FITTINGS |
| UNE-HD 60364-7-712:2017 | Low-voltage electrical installations - Part 7-712: Requirements for special installations or locations - Photovoltaic (PV) systems |
| BS EN 1218-2 : 2004 | SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 2: DOUBLE END TENONING AND/OR PROFILING MACHINES FED BY CHAIN OR CHAINS |
| UNE-EN 60079-14:2016 | Explosive atmospheres - Part 14: Electrical installations design, selection and erection |
| BS EN 54-21:2006 | Fire detection and fire alarm systems Alarm transmission and fault warning routing equipment |
| BS EN 12899-2:2007 | Fixed, vertical road traffic signs Transilluminated traffic bollards (TTB) |
| BS EN 12355 : 2003 | FOOD PROCESSING MACHINERY - DERINDING-, SKINNING- AND MEMBRANE REMOVAL MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 12098-4:2005 | Controls for heating systems Optimum start-stop control equipment for electrical systems |
| UNE-EN 1755:2016 | Industrial Trucks - Safety requirements and verification - Supplementary requirements for operation in potentially explosive atmospheres |
| BS EN 1114-2 : 1998 | PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 2: SAFETY REQUIREMENTS FOR DIE FACE PELLETISERS |
| UNE-EN 1889-1:2012 | Machines for underground mines - Mobile machines working underground - Safety - Part 1: Rubber tyred vehicles |
| UNE-EN 12331:2016 | Food processing machinery - Mincing machines - Safety and hygiene requirements |
| BS EN 861 : 2007 | SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES |
| BS EN 525:2009 | Non-domestic direct gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW |
| BS EN 13160-5:2004 | Leak detection systems Tank gauge leak detection systems |
| UNE-EN 15955-2:2014 | Railway applications - Track - Demountable machines and associated equipment - Part 2: General safety requirements |
| BS EN 13525 : 2005 | FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY |
| BS EN 13389 : 2005 | FOOD PROCESSING MACHINERY - MIXERS WITH HORIZONTAL SHAFTS - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 161 : 2011 | AUTOMATIC SHUT-OFF VALVES FOR GAS BURNERS AND GAS APPLIANCES |
| BS EN 13976-2:2011 | Rescue systems. Transportation of incubators System requirements |
| BS EN 1495 : 1998 | LIFTING PLATFORMS - MAST CLIMBING WORK PLATFORMS |
| BS EN 12921-3 : 2005 | MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 3: SAFETY OF MACHINES USING FLAMMABLE CLEANING LIQUIDS |
| BS EN 12312-5 : 2005 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 5: AIRCRAFT FUELLING EQUIPMENT |
| DD CLC/TS 61643-12:2009 | Low-voltage surge protective devices Surge protective devices connected to low-voltage power distribution systems. Selection and application principles |
| UNE-EN 12050-3:2015 | Wastewater lifting plants for buildings and sites - Part 3: Lifting plants for limited applications |
| BS EN 848-2 : 2007 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HAND FED/INTEGRATED FED ROUTING MACHINES |
| UNE-EN 1870-8:2013 | Safety of woodworking machines - Circular sawing machines - Part 8: Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading |
| BS EN 14817:2006 | Railway applications. Suspension components. Air-spring control elements |
| BS EN 1020:2009 | Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300 kW incorporating a fan to assist transportation of combustion air or combustion products |
| UNE-EN 14678-1:2013 | LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers |
| BS EN 81-22:2014 | Safety rules for the construction and installation of lifts. Lifts for the transport of persons and goods Electric lifts with inclined path |
| UNE-EN 13160-6:2017 | Leak detection systems - Part 6: Sensors in monitoring wells |
| DIN EN 14957:2010-11 | Food processing machinery - Dishwashing machines with conveyor - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN 12952-11:2007-09 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 11: REQUIREMENTS FOR LIMITING DEVICES OF THE BOILER AND ACCESSORIES |
| DIN EN 1889-1:2011-10 | MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES |
| UNE-EN 13204:2017 | Double acting hydraulic rescue tools for fire and rescue service use - Safety and performance requirements |
| BS EN 1034-3:2011 | Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines Rereelers and winders |
| BS EN 12505 : 2000 | FOOD PROCESSING MACHINERY - CENTRIFUGAL MACHINES FOR PROCESSING EDIBLE OILS AND FATS - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 12753 : 2005 | THERMAL CLEANING SYSTEMS FOR EXHAUST GAS FROM SURFACE TREATMENT EQUIPMENT - SAFETY REQUIREMENTS |
| BS EN 61800-5-1:2007 | Adjustable speed electrical power drive systems Safety requirements. Electrical, thermal and energy |
| BS EN 12151:2007 | Machinery and plants for the preparation of concrete and mortar. Safety requirements |
| UNE-EN 81-22:2014 | Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 22: Electric lifts with inclined path |
| BS EN 809 : 1998 | PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS |
| BS EN 12649 : 2008 | CONCRETE COMPACTORS AND SMOOTHING MACHINES - SAFETY |
| BS EN 741 : 2000 | CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - SAFETY REQUIREMENTS FOR SYSTEMS AND THEIR COMPONENTS FOR PNEUMATIC HANDLING OF BULK MATERIALS |
| BS EN 1570 : 1999 | SAFETY REQUIREMENTS FOR LIFTING TABLES |
| UNE-EN 378-3:2017 | Refrigerating systems and heat pumps - Safety and environmental requirements - Part 3: Installation site and personal protection |
| DIN EN 676:2008-11 | Automatic forced draught burners for gaseous fuels (includes Amendment A2:2008) |
| BS EN 837-1:1998 | Pressure gauges Bourdon tube pressure gauges. Dimensions, metrology, requirements and testing |
| DIN EN 14960:2013-12 | INFLATABLE PLAY EQUIPMENT - SAFETY REQUIREMENTS AND TEST METHODS |
| EN 12414:1999 | Vehicle parking control equipment - Pay and display ticket machine - Technical and functional requirements |
| UNE-EN 61869-1:2010 | Instrument transformers -- Part 1: General requirements |
| UNE-EN 50521:2010 | Connectors for photovoltaic systems - Safety requirements and tests |
| I.S. EN 777-4:2009 | MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 4: SYSTEM H - SAFETY |
| UNE-EN 848-1:2008 | Safety of woodworking machines - One side moulding machines with rotating tool - Part 1: Single spindle vertical moulding machines |
| UNI EN 267 : 2011 | AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS |
| UNE-EN 50291-2:2011 | Electrical apparatus for the detection of carbon monoxide in domestic premises - Part 2: Electrical apparatus for continuous operation in a fixed installation in recreational vehicles and similar premises including recreational craft - Additional test methods and performance requirements |
| I.S. EN 525:2009 | NON-DOMESTIC DIRECT GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW |
| UNE-EN 62271-100:2011 | High-voltage switchgear and controlgear -- Part 100: Alternating-current circuit-breakers |
| CEI EN 62026-2 : 2013 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 2: ACTUATOR SENSOR INTERFACE (AS-I) |
| UNE-EN 61535:2010 | Installation couplers intended for permanent connection in fixed installations |
| EN 60745-1:2009/A11:2010 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 777-2:2009 | MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 2: SYSTEM E - SAFETY |
| I.S. EN 837-1:1997 | PRESSURE GAUGES - PART 1: BOURDON TUBE PRESSURE GAUGES - DIMENSIONS, METROLOGY, REQUIREMENTS AND TESTING |
| EN 60335-2-28:2003/A1:2008 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-28: PARTICULAR REQUIREMENTS FOR SEWING MACHINES |
| I.S. EN 416-1:2009 | SINGLE BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATERS FOR NON-DOMESTIC USE - PART 1: SAFETY |
| UNI EN 54-3 : 2014 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 3: FIRE ALARM DEVICES - SOUNDERS |
| I.S. EN 777-3:2009 | MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON DOMESTIC USE - PART 3: SYSTEM F - SAFETY |
| I.S. EN 1319:2009 | DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING, WITH FAN-ASSISTED BURNERS NOT EXCEEDING A NET HEAT INPUT OF 70 KW |
| EN 809 : 1998 COR 2010 | PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS |
| EN 60745-1:2006 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS |
| ONORM EN 676 : 2008 | AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS |
| EN 62790:2015 | Junction boxes for photovoltaic modules - Safety requirements and tests |
| EN 41003:2008 | Particular safety requirements for equipment to be connected to telecommunication networks and/or a cable distribution system |
| I.S. EN 81-72:2015 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PARTICULAR APPLICATIONS FOR PASSENGER AND GOODS PASSENGER LIFTS - PART 72: FIREFIGHTERS LIFTS |
| I.S. EN 13463-3:2005 | NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 3: PROTECTION BY FLAMEPROOF ENCLOSURE 'D' |
| OVE/ONORM EN 61386-1 : 2009 | CONDUIT SYSTEMS FOR CABLE MANAGEMENT - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 419-1:2009 | NON-DOMESTIC GAS-FIRED OVERHEAD LUMINOUS RADIANT HEATERS - PART 1: SAFETY |
| EN 809:1998+A1:2009 | Pumps and pump units for liquids - Common safety requirements |
| EN 60898-1:2003/A13:2012 | ELECTRICAL ACCESSORIES - CIRCUIT BREAKERS FOR OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR INSTALLATIONS - PART 1: CIRCUIT-BREAKERS FOR A.C. OPERATION (IEC 60898-1:2002, MODIFIED) |
| UNE-EN 13463-5:2013 | Non-electrical equipment intended for use in potentially explosive atmospheres - Part 5: Protection by constructional safety 'c' |
| UNI EN 13525 : 2010 | FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY |
| UNE-EN 848-3:2013 | Safety of woodworking machines - One side moulding machines with rotating tool - Part 3: Numerically controlled (NC) boring and routing machines |
| EN 81-72:2015 | Safety rules for the construction and installation of lifts - Particular applications for passenger and goods passenger lifts - Part 72: Firefighters lifts |
| I.S. EN 12414:2000 | VEHICLE PARKING CONTROL EQUIPMENT - PAY AND DISPLAY TICKET MACHINE - TECHNICAL AND FUNCTIONAL REQUIREMENTS |
| EN 50155:2017 | Railway applications - Rolling stock - Electronic equipment |
| UNE-EN 60730-1:2013 | Automatic electrical controls for household and similar use - Part 1: General requirements |
| UNE-EN 16207:2015 | Railway applications - Braking - Functional and performance criteria of Magnetic Track Brake systems for use in railway rolling stock |
| UNE-EN 60204-1:2007 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| EN 60601-1-12:2015 | Medical electrical equipment - Part 1-12: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency medical services environment |
| I.S. EN 621:2009 | NON-DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW, WITHOUT A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR AND/OR COMBUSTION PRODUCTS |
| EN 81-40:2008 | Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 40: Stairlifts and inclined lifting platforms intended for persons with impaired mobility |
| I.S. EN 848-2:2007 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HAND FED/INTEGRATED FED ROUTING MACHINES |
| I.S. EN 778:2009 | DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 70 KW, WITHOUT A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR AND/OR COMBUSTION PRODUCTS |
| DIN EN ISO 16484-2:2004-10 | Building automation and control systems (BACS) - Part 2: Hardware (ISO 16484-2:2004) |
| DIN EN 12067-2:2004-06 | Gas/air ratio controls for gas burners and gas burning appliances - Part 2: Electronic types |
| UNE-EN 12966-1:2006 | Road vertical signs - Variable message traffic signs - Part 1: Product standard |
| I.S. EN 777-1:2009 | MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 1: SYSTEM D - SAFETY |
| I.S. EN 1020:2009 | NON-DOMESTIC FORCED CONVECTION GAS-FIRED AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW INCORPORATING A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR OR COMBUSTION PRODUCTS |
| EN 13985:2003+A1:2009 | Machine tools - Safety - Guillotine shears |
| EN 1474-1:2008 | Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 1: Design and testing of transfer arms |
| EN 13763-26:2004 | Explosives for civil uses - Detonators and relays - Part 26: Definitions, methods, and requirements for devices and accessories for reliable and safe function of detonators and relays |
| EN 13736:2003+A1:2009 | Safety of machine tools - Pneumatic presses |
| EN 1870-15:2012 | Safety of woodworking machines - Circular sawing machines - Part 15: Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading |
| EN 909:1998+A1:2009 | Agricultural and forestry machinery - Centre pivot and moving lateral types irrigation machines - Safety |
| EN 618:2002+A1:2010 | Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors |
| EN 1570:1998+A2:2009 | Safety requirements for lifting tables |
| EN 12629-4:2001+A1:2010 | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 4:Concrete roof tile making machines |
| EN 14678-1:2013 | LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers |
| EN 12629-7:2004+A1:2010 | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 7: Stationary and mobile equipment for long line manufacture of prestressed products |
| EN 982:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics |
| EN 13886:2005+A1:2010 | Food processing machinery - Cooking kettles equipped with powered stirrer and/or mixer - Safety and hygiene requirements |
| EN 15095:2007+A1:2008 | Power-operated mobile racking and shelving, carousels and storage lifts - Safety requirements |
| UNI EN 13617-1 : 2012 | PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS |
| EN 50262 : 1998 AMD 2 2004 | CABLE GLANDS FOR ELECTRICAL INSTALLATIONS |
| BS 3676-1(2000) : 2000 | SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED-ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS |
| EN 50298:1998 | Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements |
| UNI EN 13035-9 : 2010 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 9: WASHING INSTALLATIONS |
| UNI EN 13288 : 2010 | FOOD PROCESSING MACHINERY - BOWL LIFTING AND TILTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 1612-2 : 2008 | PLASTICS AND RUBBER MACHINES - REACTION MOULDING MACHINES - PART 2: SAFETY REQUIREMENTS FOR REACTION MOULDING PLANT |
| UNI EN 1870-8 : 2013 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 8: SINGLE BLADE EDGING CIRCULAR RIP SAWING MACHINES WITH POWER DRIVEN SAW UNIT AND MANUAL LOADING AND/OR UNLOADING |
| UNI EN 1870-13 : 2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES |
| UNI EN 14957 : 2010 | FOOD PROCESSING MACHINERY - DISHWASHING MACHINES WITH CONVEYOR - SAFETY AND HYGIENE REQUIREMENTS |
| EN 50281-1-2 : 98 AMD 1 2002 | ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 1-2: ELECTRICAL APPARATUS PROTECTED BY ENCLOSURES - SELECTION, INSTALLATION AND MAINTENANCE |
| UNI EN 12581 : 2010 | COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS |
| UNI EN 1010-1 : 2011 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS |
| CEI EN 50272-2 : 2002 | SAFETY REQUIREMENTS FOR SECONDARY BATTERIES AND BATTERY INSTALLATIONS - PART 2: STATIONARY BATTERIES |
| UNI EN 13379 : 2013 | PASTA PROCESSING PLANTS - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR, STICK MAGAZINE - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 1495 : 2009 | LIFTING PLATFORMS - MAST CLIMBING WORK PLATFORMS |
| UNI EN 416-1 : 2009 | SINGLE BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATERS FOR NON-DOMESTIC USE - PART 1: SAFETY |
| UNI EN 1889-1 : 2011 | MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES |
| UNI EN 12952-11 : 2007 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 11: REQUIREMENTS FOR LIMITING DEVICES OF THE BOILER AND ACCESSORIES |
| UNI EN 14710-1 : 2009 | FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITHOUT PRIMER - PART 1: CLASSIFICATION, GENERAL AND SAFETY REQUIREMENTS |
| UNI EN 14655 : 2010 | FOOD PROCESSING MACHINERY - BAGUETTE SLICERS - SAFETY AND HYGIENE REQUIREMENTS |
| EN 50016:2002 | Electrical apparatus for potentially explosive atmospheres - Pressurized apparatus "p" |
| UNI EN 809 : 2009 | PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS |
| UNI EN 14960 : 2013 | INFLATABLE PLAY EQUIPMENT - SAFETY REQUIREMENTS AND TEST METHODS |
| UNI EN 1458-1 : 2012 | DOMESTIC DIRECT GAS-FIRED TUMBLE DRYERS OF TYPES B22D AND B23D, OF NOMINAL HEAT INPUT NOT EXCEEDING 6 KW - PART 1: SAFETY |
| UNI EN 619 : 2011 | CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - SAFETY AND EMC REQUIREMENTS FOR EQUIPMENT FOR MECHANICAL HANDLING OF UNIT LOADS |
| UNI EN 15095 : 2009 | POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS |
| UNI EN 13113 : 2010 | TANNERY MACHINES - ROLLER COATING MACHINES - SAFETY REQUIREMENTS |
| UNI EN 1114-3 : 2009 | PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS |
| UNI EN 12854 : 2010 | FOOD PROCESSING MACHINERY - BEAM MIXERS - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 609-2 : 2010 | AGRICULTURAL AND FORESTRY MACHINERY - SAFETY OF LOG SPLITTERS - PART 2: SCREW SPLITTERS |
| UNI EN 12159 : 2013 | BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES |
| UNI EN 972 : 2010 | TANNERY MACHINES - RECIPROCATING ROLLER MACHINES - SAFETY REQUIREMENTS |
| UNI EN 13621 : 2010 | FOOD PROCESSING MACHINERY - SALAD DRYERS - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 12098-1 : 2013 | CONTROLS FOR HEATING SYSTEMS - PART 1: CONTROL EQUIPMENT FOR HOT WATER HEATING SYSTEMS |
| UNI EN 1175-1 : 2010 | SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL REQUIREMENTS - PART 1: GENERAL REQUIREMENTS FOR BATTERY POWERED TRUCKS |
| UNI EN 1870-15 : 2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 15: MULTI-BLADE CROSS-CUT SAWING MACHINES WITH INTEGRATED FEED OF THE WORKPIECE AND MANUAL LOADING AND/OR UNLOADING |
| UNI EN 500-1 : 2010 | MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 1: COMMON REQUIREMENTS |
| UNI EN 13886 : 2010 | FOOD PROCESSING MACHINERY - COOKING KETTLES EQUIPPED WITH POWERED STIRRER AND/OR MIXER - SAFETY AND HYGIENE REQUIREMENTS |
| EN 45510-2-2:1999 | Guide for procurement of power station equipment - Part 2-2: Electrical equipment - Uninterruptible power supplies |
| UNI EN 13736 : 2009 | SAFETY OF MACHINE TOOLS - PNEUMATIC PRESSES |
| UNI EN 13954 : 2010 | FOOD PROCESSING MACHINERY - BREAD SLICERS - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 13862 : 2009 | FLOOR CUTTING-OFF MACHINES - SAFETY |
| UNI EN 1114-2 : 2008 | PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 2: SAFETY REQUIREMENTS FOR DIE FACE PELLETISERS |
| UNI EN 13208 : 2010 | FOOD PROCESSING MACHINERY - VEGETABLE PEELERS - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 15954-2 : 2013 | RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| UNI EN 1398 : 2009 | DOCK LEVELLERS - SAFETY REQUIREMENTS |
| UNI EN 12750 : 2013 | SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES |
| EN 617:2001+A1:2010 | Continuous handling equipment and systems - Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers |
| UNI EN 848-3 : 2012 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES |
| UNI EN 14394 : 2008 | HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREES C |
| UNI EN 12645 : 2014 | TYRE PRESSURE MEASURING INSTRUMENTS - DEVICES FOR INSPECTION OF PRESSURE AND/OR INFLATION/DEFLATION OF TYRES FOR MOTOR VEHICLES - METROLOGY, REQUIREMENTS AND TESTING |
| UNI EN 1570 : 2009 | SAFETY REQUIREMENTS FOR LIFTING TABLES |
| UNI EN 1643 : 2014 | SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - VALVE PROVING SYSTEMS FOR AUTOMATIC SHUT-OFF VALVES |
| UNI EN 1114-1 : 2011 | PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 1: SAFETY REQUIREMENTS FOR EXTRUDERS |
| EN 50465:2015 | Gas appliances - Combined heat and power appliance of nominal heat input inferior or equal to 70 kW |
| UNI EN 778 : 2009 | DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 70 KW, WITHOUT A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR AND/OR COMBUSTION PRODUCTS |
| UNI EN 12921-2 : 2009 | MACHINES FOR SURFACE CLEANING AND PRE- TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 2: SAFETY OF MACHINES USING WATER BASED CLEANING LIQUIDS |
| UNI EN 13389 : 2010 | FOOD PROCESSING MACHINERY - MIXERS WITH HORIZONTAL SHAFTS - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 14268 : 2006 | IRRIGATION TECHNIQUES - METERS FOR IRRIGATION WATER |
| UNI EN 54-23 : 2010 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 23: FIRE ALARM DEVICES - VISUAL ALARM DEVICES |
| UNI EN 15067 : 2008 | PLASTICS AND RUBBER MACHINES - FILM CONVERTING MACHINES FOR BAGS AND SACKS - SAFETY REQUIREMENTS |
| UNI EN 1864 : 2008 | INLAND NAVIGATION VESSELS - WHEELHOUSE - ERGONOMIC AND SAFETY REQUIREMENTS |
| UNI EN 617 : 2011 | CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - SAFETY AND EMC REQUIREMENTS FOR THE EQUIPMENT FOR THE STORAGE OF BULK MATERIALS IN SILOS, BUNKERS, BINS AND HOPPERS |
| UNI EN 1870-16 : 2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V CUTTING |
| UNI EN 15061 : 2009 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT |
| EN 50088 : 96 COR 2007 | SAFETY OF ELECTRIC TOYS |
| UNI EN 860 : 2012 | SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANNING MACHINES |
| EN 50164-3 : 2006 AMD 1 2009 | LIGHTNING PROTECTION COMPONENTS (LPC) - PART 3: REQUIREMENTS FOR ISOLATING SPARK GAPS |
| EN 50086-1 : 93 COR 2001 | CONDUIT SYSTEMS FOR ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS |
| UNI EN 415-6 : 2013 | SAFETY OF PACKAGING MACHINES - PART 6: PALLET WRAPPING MACHINES |
| UNI EN 777-4 : 2009 | MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 4: SYSTEM H - SAFETY |
| UNI EN 1028-1 : 2008 | FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITH PRIMER - PART 1: CLASSIFICATION - GENERAL AND SAFETY REQUIREMENTS |
| UNI EN 1106 : 2010 | MANUALLY OPERATED TAPS FOR GAS BURNING APPLIANCES |
| UNI EN 12981 : 2009 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS |
| UNI EN 12184 : 2014 | ELECTRICALLY POWERED WHEELCHAIRS, SCOOTERS AND THEIR CHARGERS - REQUIREMENTS AND TEST METHODS |
| UNI EN 815 : 2009 | SAFETY OF UNSHIELDED TUNNEL BORING MACHINES AND RODLESS SHAFT BORING MACHINES FOR ROCK - SAFETY REQUIREMENTS |
| UNI EN 12852 : 2010 | FOOD PROCESSING MACHINERY - FOOD PROCESSORS AND BLENDERS - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 12267 : 2010 | FOOD PROCESSING MACHINERY - CIRCULAR SAW MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 1010-2 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 2: PRINTING AND VARNISHING MACHINES INCLUDING PRE-PRESS MACHINERY |
| UNI EN 13871 : 2014 | FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINERY - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 1028-2 : 2008 | FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITH PRIMER - PART 2: VERIFICATION OF GENERAL AND SAFETY REQUIREMENTS |
| UNI EN 12855 : 2010 | FOOD PROCESSING MACHINERY - ROTATING BOWL CUTTERS - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 12649 : 2011 | CONCRETE COMPACTORS AND SMOOTHING MACHINES - SAFETY |
| UNI EN 12417 : 2009 | MACHINE TOOLS - SAFETY - MACHINING CENTRES |
| UNI EN 953 : 2009 | SAFETY OF MACHINERY - GUARDS - GENERAL REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF FIXED AND MOVABLE GUARDS |
| UNI EN 12601 : 2011 | RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN GENERATING SETS - SAFETY |
| UNI EN 13463-5 : 2011 | NON-ELECTRICAL EQUIPMENT INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 5: PROTECTION BY CONSTRUCTIONAL SAFETY 'C' |
| UNI EN 12012-3 : 2008 | PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 3: SAFETY REQUIREMENTS FOR SHREDDERS |
| UNI EN 859 : 2012 | SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANING MACHINES |
| UNI EN 1020 : 2009 | NON-DOMESTIC FORCED CONVECTION GAS- FIRED AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW INCORPORATING A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR OR COMBUSTION PRODUCTS |
| UNI EN 13378 : 2013 | PASTA PROCESSING PLANTS - PASTA PRESSES - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 13418 : 2013 | PLASTICS AND RUBBER MACHINES - WINDING MACHINES FOR FILM OR SHEET - SAFETY REQUIREMENTS |
| UNI EN 12757-1 : 2010 | MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING |
| UNI EN 13112 : 2010 | TANNERY MACHINES - SPLITTING AND BANDKNIFE SHEARING MACHINES - SAFETY REQUIREMENTS |
| EN 60898-1:2003/A13:2012 | ELECTRICAL ACCESSORIES - CIRCUIT BREAKERS FOR OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR INSTALLATIONS - PART 1: CIRCUIT-BREAKERS FOR A.C. OPERATION (IEC 60898-1:2002, MODIFIED) |
| UNI EN 1218-4 : 2009 | SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 4: EDGE BANDING MACHINES FED BY CHAIN(S) |
| UNI EN 12899-2 : 2008 | FIXED, VERTICAL ROAD TRAFFIC SIGNS - PART 2: TRANSILLUMINATED TRAFFIC BOLLARDS (TTB) |
| UNI EN 848-1 : 2013 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 1: SINGLE SPINDLE VERTICAL MOULDING MACHINES |
| UNI EN 12201-3 : 2013 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 3: FITTINGS |
| EN 50532:2010 | Compact Equipment Assembly for Distribution Substations (CEADS) |
| UNI EN 12978 : 2009 | INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY DEVICES FOR POWER OPERATED DOORS AND GATES - REQUIREMENTS AND TEST METHODS |
| UNI EN 618 : 2011 | CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - SAFETY AND EMC REQUIREMENTS FOR EQUIPMENT FOR MECHANICAL HANDLING OF BULK MATERIALS EXCEPT FIXED BELT CONVEYORS |
| UNI EN 12547 : 2014 | CENTRIFUGES - COMMON SAFETY REQUIREMENTS |
| UNI EN 14466 : 2008 | FIRE-FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS |
| UNI EN 201 : 2010 | PLASTICS AND RUBBER MACHINES - INJECTION MOULDING MACHINES - SAFETY REQUIREMENTS |
| EN 50083-4 : 98 COR 1999 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 4: PASSIVE WIDEBAND EQUIPMENT FOR COAXIAL CABLE NETWORKS |
| UNI EN 1870-11 : 2013 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS) |
| UNI EN 1915-1 : 2014 | AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 1: BASIC SAFETY REQUIREMENTS |
| UNI EN 15001-1 : 2009 | GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING |
| UNI EN 12043 : 2015 | FOOD PROCESSING MACHINERY - INTERMEDIATE PROVERS - SAFETY AND HYGIENE REQUIREMENTS |
| EN 1870-11:2013 | Safety of woodworking machines - Circular sawing machines - Part 11: Semi automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws) |
| UNI EN 1859 : 2013 | CHIMNEYS - METAL CHIMNEYS - TEST METHODS |
| UNI EN 14597 : 2012 | TEMPERATURE CONTROL DEVICES AND TEMPERATURE LIMITERS FOR HEAT GENERATING SYSTEMS |
| UNI EN 1870-9 : 2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 9: DOUBLE BLADE CIRCULAR SAWING MACHINES FOR CROSS-CUTTING WITH INTEGRATED FEED AND WITH MANUAL LOADING AND/OR UNLOADING |
| UNI EN 1870-12 : 2014 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 12: PENDULUM CROSS-CUT SAWING MACHINES |
| UNI EN 983 : 2009 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - PNEUMATICS |
| UNI EN 12984 : 2010 | FOOD PROCESSING MACHINERY - PORTABLE AND/OR HAND-GUIDED MACHINES AND APPLIANCES WITH MECHANICALLY DRIVEN CUTTING TOOLS - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 12418 : 2009 | MASONRY AND STONE CUTTING-OFF MACHINES FOR JOB SITE - SAFETY |
| UNI EN 15091 : 2014 | SANITARY TAPWARE - ELECTRONIC OPENING AND CLOSING SANITARY TAPWARE |
| UNI EN 415-5 : 2010 | SAFETY OF PACKAGING MACHINES - PART 5: WRAPPING MACHINES |
| UNI EN 1870-14 : 2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 14: VERTICAL PANEL SAWING MACHINES |
| UNI EN 13885 : 2010 | FOOD PROCESSING MACHINERY - CLIPPING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 1493 : 2010 | VEHICLE LIFTS |
| UNI EN 1678 : 2010 | FOOD PROCESSING MACHINERY - VEGETABLE CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 13534 : 2010 | FOOD PROCESSING MACHINERY - CURING INJECTION MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 1870-10 : 2013 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES |
| I.S. EN 12979:2002 | AUTOMOTIVE LPG-SYSTEMS - INSTALLATION REQUIREMENTS |
| EN 860:2007+A2:2012 | Safety of woodworking machines - One side thickness planing machines |
| UNI EN 454 : 2015 | FOOD PROCESSING MACHINERY - PLANETARY MIXERS - SAFETY AND HYGIENE REQUIREMENTS |
| EN 50020:2002 | Electrical apparatus for potentially explosive atmospheres - Intrinsic safety 'i' |
| UNI EN 13616 : 2004 | OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID PETROLEUM FUELS |
| UNI EN 1870-4 : 2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTIBLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING |
| UNI EN 982 : 2009 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - HYDRAULICS |
| UNI EN 1870-1 : 2009 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS |
| UNI EN 12352 : 2006 | TRAFFIC CONTROL EQUIPMENT - WARNING AND SAFETY LIGHT DEVICES |
| UNI EN 1760-2 : 2009 | SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE EDGES AND PRESSURE SENSITIVE BARS |
| UNI EN 13278 : 2013 | OPEN FRONTED GAS-FIRED INDEPENDENT SPACE HEATERS |
| UNI EN 12409 : 2011 | PLASTICS AND RUBBER MACHINES - THERMOFORMING MACHINES - SAFETY REQUIREMENTS |
| UNI EN 12953-9 : 2007 | SHELL BOILERS - PART 9: REQUIREMENTS FOR LIMITING DEVICES OF THE BOILER AND ACCESSORIES |
| UNI EN 12041 : 2015 | FOOD PROCESSING MACHINERY - MOULDERS - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 1247 : 2010 | FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR LADLES, POURING EQUIPMENT, CENTRIFUGAL CASTING MACHINES, CONTINUOUS AND SEMI CONTINUOUS CASTING MACHINES |
| UNI EN 12753 : 2010 | THERMAL CLEANING SYSTEMS FOR EXHAUST GAS FROM SURFACE TREATMENT EQUIPMENT - SAFETY REQUIREMENTS |
| EN 13204:2016 | Double acting hydraulic rescue tools for fire and rescue service use - Safety and performance requirements |
| UNI EN 12629-4 : 2010 | MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 4: CONCRETE ROOF TILE MAKING MACHINES |
| UNI EN 848-2 : 2013 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HAND FED/INTEGRATED FED ROUTING MACHINES |
| EN 60297-3-109:2016 | MECHANICAL STRUCTURES FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - DIMENSIONS OF MECHANICAL STRUCTURES OF THE 482,6 MM (19 IN) SERIES - PART 3-109: DIMENSIONS OF CHASSIS FOR EMBEDDED COMPUTING DEVICES |
| UNI EN 12629-7 : 2010 | MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 7: STATIONARY AND MOBILE EQUIPMENT FOR LONG LINE MANUFACTURE OF PRESTRESSED PRODUCTS |
| UNI EN 1175-3 : 2010 | SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL REQUIREMENTS - PART 3: SPECIFIC REQUIREMENTS FOR THE ELECTRIC POWER TRANSMISSION SYSTEMS OF INTERNAL COMBUSTION ENGINE POWERED TRUCKS |
| UNI EN 1777 : 2010 | HYDRAULIC PLATFORMS (HPS) FOR FIRE FIGHTING AND RESCUE SERVICES - SAFETY REQUIREMENTS AND TESTING |
| UNI EN 12336 : 2009 | TUNNELLING MACHINES - SHIELD MACHINES, THRUST BORING MACHINES, AUGER BORING MACHINES, LINING ERECTION EQUIPMENT - SAFETY REQUIREMENTS |
| UNI EN 1319 : 2010 | DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING, WITH FAN- ASSISTED BURNERS NOT EXCEEDING A NET HEAT INPUT OF 70 KW |
| UNI EN 1854 : 2010 | PRESSURE SENSING DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES |
| UNI EN 1889-2 : 2009 | MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 2: RAIL LOCOMOTIVES |
| UNI EN 12044 : 2010 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - CUTTING AND PUNCHING MACHINES - SAFETY REQUIREMENTS |
| UNI EN 1034-2 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 2: BARKING DRUMS |
| UNI EN 746-2 : 2011 | INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 2: SAFETY REQUIREMENTS FOR COMBUSTION AND FUEL HANDLING SYSTEMS |
| UNI EN 621 : 2010 | NON-DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW, WITHOUT A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR AND/OR COMBUSTION PRODUCTS |
| UNI EN 12182 : 2012 | ASSISTIVE PRODUCTS FOR PERSONS WITH DISABILITY - GENERAL REQUIREMENTS AND TEST METHODS |
| UNI EN 13289 : 2013 | PASTA PROCESSING PLANTS - DRYERS AND COOLERS - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 12853 : 2010 | FOOD PROCESSING MACHINERY - HAND-HELD BLENDERS AND WHISKS - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 14043 : 2014 | HIGH RISE AERIAL APPLIANCES FOR FIRE AND RESCUE SERVICE USE - TURNTABLE LADDERS WITH COMBINED MOVEMENTS - SAFETY AND PERFORMANCE REQUIREMENTS AND TEST METHODS |
| UNI EN 13985 : 2009 | MACHINE TOOLS - SAFETY - GUILLOTINE SHEARS |
| UNI EN 12957 : 2009 | MACHINE TOOLS - SAFETY - ELECTRO DISCHARGE MACHINES |
| UNI EN 525 : 2009 | NON-DOMESTIC DIRECT GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW |
| UNI EN 861 : 2012 | SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES |
| UNI EN 14010 : 2009 | SAFETY OF MACHINERY - EQUIPMENT FOR POWER DRIVEN PARKING OF MOTOR VEHICLES - SAFETY AND EMC REQUIREMENTS FOR DESIGN, MANUFACTURING, ERECTION AND COMMISSIONING STAGES |
| UNI EN 15955-2 : 2013 | RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| UNI EN 1710 : 2008 | EQUIPMENT AND COMPONENTS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES |
| UNI EN 1760-1 : 2009 | SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE MATS AND PRESSURE SENSITIVE FLOORS |
| UNI EN 1248 : 2009 | FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR ABRASIVE BLASTING EQUIPMENT |
| UNI EN 12012-2 : 2008 | PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 2: SAFETY REQUIREMENTS FOR STRAND PELLETISERS |
| UNI EN 13128 : 2009 | SAFETY OF MACHINE TOOLS - MILLING MACHINES (INCLUDING BORING MACHINES) |
| UNI EN 14678-1 : 2013 | LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS |
| UNI EN 12110 : 2014 | TUNNELLING MACHINES - AIR LOCKS - SAFETY REQUIREMENTS |
| UNI EN 12348 : 2009 | CORE DRILLING MACHINES ON STAND - SAFETY |
| UNI EN 12899-1 : 2008 | FIXED, VERTICAL ROAD TRAFFIC SIGNS - PART 1: FIXED SIGNS |
| UNI EN 12268 : 2014 | FOOD PROCESSING MACHINERY - BAND SAW MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 14886 : 2008 | PLASTICS AND RUBBER MACHINES - BANDKNIFE CUTTING MACHINES FOR BLOCK FOAMS - SAFETY REQUIREMENTS |
| UNI EN 1807 : 2010 | SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES |
| UNI EN 1034-14 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 14: REEL SPLITTER |
| UNI EN 777-1 : 2009 | MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 1: SYSTEM D - SAFETY |
| UNI EN 13355 : 2009 | COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS |
| EN 45510-2-9:2008 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-9: ELECTRICAL EQUIPMENT - CABLING SYSTEMS |
| UNI EN 15869-2 : 2010 | INLAND NAVIGATION VESSELS - ELECTRICAL SHORE CONNECTION, THREE-PHASE CURRENT 400 V, UP TO 63 A, 50 HZ - PART 2: ONSHORE UNIT, SAFETY REQUIREMENTS |
| UNI EN 161 : 2013 | AUTOMATIC SHUT-OFF VALVES FOR GAS BURNERS AND GAS APPLIANCES |
| BS EN 1247 : 2004 | FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR LADLES, POURING EQUIPMENT, CENTRIFUGAL CASTING MACHINES, CONTINUOUS AND SEMI CONTINUOUS CASTING MACHINES |
| UNI EN 12158-2 : 2010 | BUILDERS' HOISTS FOR GOODS - PART 2: INCLINED HOISTS WITH NON-ACCESSIBLE LOAD CARRYING DEVICES |
| UNI EN 422 : 2009 | PLASTICS AND RUBBER MACHINES - BLOW MOULDING MACHINES - SAFETY REQUIREMENTS |
| UNI EN 12621 : 2010 | MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS |
| UNI EN 12215 : 2010 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS |
| UNI EN 12921-3 : 2009 | MACHINES FOR SURFACE CLEANING AND PRE- TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 3: SAFETY OF MACHINES USING FLAMMABLE CLEANING LIQUIDS |
| UNI EN 14492-1 : 2009 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| UNI EN 14492-2 : 2009 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| UNI EN 12111 : 2014 | TUNNELLING MACHINES - ROAD HEADERS AND CONTINUOUS MINERS - SAFETY REQUIREMENTS |
| UNI EN 12717 : 2009 | SAFETY OF MACHINE TOOLS - DRILLING MACHINES |
| UNI EN 12098-3 : 2013 | CONTROLS FOR HEATING SYSTEMS - PART 3: CONTROL EQUIPMENT FOR ELECTRICAL HEATING SYSTEMS |
| UNI EN 12355 : 2010 | FOOD PROCESSING MACHINERY - DERINDING-, SKINNING- AND MEMBRANE REMOVAL MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 13570 : 2010 | FOOD PROCESSING MACHINERY - MIXING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 415-7 : 2008 | SAFETY OF PACKAGING MACHINES - PART 7: GROUP AND SECONDARY PACKAGING MACHINES |
| UNI EN 1374 : 2010 | AGRICULTURAL MACHINERY - SILOS STATIONARY UNLOADERS FOR ROUND SILOS - SAFETY |
| UNI EN 14044 : 2014 | HIGH RISE AERIAL APPLIANCES FOR FIRE AND RESCUE SERVICE USE - TURNTABLE LADDERS WITH SEQUENTIAL MOVEMENTS - SAFETY AND PERFORMANCE REQUIREMENTS AND TEST METHODS |
| UNI EN 741 : 2011 | CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - SAFETY REQUIREMENTS FOR SYSTEMS AND THEIR COMPONENTS FOR PNEUMATIC HANDLING OF BULK MATERIALS |
| UNI EN 1034-3 : 2012 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 3: REREELERS AND WINDERS |
| UNI EN 1870-5 : 2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 5: CIRCULAR SAWBENCHES/UP-CUTTING CROSS-CUT SAWING MACHINES |
| UNI EN 909 : 2010 | AGRICULTURAL AND FORESTRY MACHINERY - CENTRE PIVOT AND MOVING LATERAL TYPES IRRIGATION MACHINES - SAFETY |
| EN 50281-1-1 : 98 AMD 1 2002 | ELECTRICAL APPARATUS PROTECTED BY ENCLOSURES - CONSTRUCTION AND TESTING FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - ELECTRICAL APPARATUS PROTECTED BY ENCLOSURES - CONSTRUCTION AND TESTING |
| UNI EN 1218-3 : 2009 | SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 3: HAND FED TENONING MACHINES WITH SLIDING TABLE FOR CUTTING STRUCTURAL TIMBERS |
| UNI EN 12505 : 2010 | FOOD PROCESSING MACHINERY - CENTRIFUGAL MACHINES FOR PROCESSING EDIBLE OILS AND FATS - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 13675 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR TUBE FORMING AND ROLLING MILLS AND THEIR FINISHING LINE EQUIPMENT |
| UNI EN 1760-3 : 2009 | SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES |
| UNI EN 14958 : 2009 | FOOD PROCESSING MACHINERY - MACHINERY FOR GRINDING AND PROCESSING FLOUR AND SEMOLINA - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 289 : 2014 | PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS |
| UNI EN 1012-2 : 2009 | COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 2: VACUUM PUMPS |
| UNI EN 777-2 : 2009 | MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 2: SYSTEM E - SAFETY |
| UNI EN 1034-22 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 22: WOOD GRINDERS |
| UNI EN 13591 : 2010 | FOOD PROCESSING MACHINERY - FIXED DECK OVEN LOADERS - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 1870-7:2012 | Safety of woodworking machines - Circular sawing machines - Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading |
| UNI EN 12622 : 2014 | SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES |
| UNI EN 419-1 : 2009 | NON DOMESTIC GAS-FIRED OVERHEAD LUMINOUS RADIANT HEATERS - PART 1: SAFETY |
| UNI EN 13114 : 2010 | TANNERY MACHINES - ROTATING PROCESS VESSELS - SAFETY REQUIREMENTS |
| UNI EN 676 : 2008 | AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS |
| UNI EN 777-3 : 2009 | MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 3: SYSTEM F - SAFETY |
| UNE-EN 50223:2016 | Stationary electrostatic application equipment for ignitable flock material - Safety requirements |
| UNE-EN 54-16:2010 | Fire detection and fire alarm systems - Part 16: Voice alarm control and indicating equipment |
| BS EN 50311:2003 | Railway applications. Rolling stock. D.C. supplied electronic ballasts for lighting fluorescent lamps |
| I.S. EN 62080:2009 | SOUND SIGNALLING DEVICES FOR HOUSEHOLD AND SIMILAR PURPOSES |
| CEI EN 50464-2-2 : 2007 | THREE-PHASE OIL-IMMERSED DISTRIBUTION TRANSFORMERS 50 HZ, FROM 50 KVA TO 2500 KVA WITH HIGHEST VOLTAGE FOR EQUIPMENT NOT EXCEEDING 36 KV - PART 2-2: DISTRIBUTION TRANSFORMERS WITH CABLE BOXES ON THE HIGH-VOLTAGE AND/OR LOW-VOLTAGE SIDE - CABLE BOXES TYPE 1 FOR USE ON DISTRIBUTION TRANSFORMERS MEETING THE REQUIREMENTS OF EN 50464-2-1 |
| CEI EN 61587-4 : 2013 | MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND IEC 60297 SERIES - PART 4: COMBINATION OF PERFORMANCE LEVELS FOR MODULAR CABINETS |
| BS EN 61534-1 : 2011 | POWERTRACK SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| DIN EN 54-3:2014-09 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 3: FIRE ALARM DEVICES - SOUNDERS |
| UNI EN 15164 : 2008 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR CHAIN- AND BELT-SLOTTING MACHINES |
| UNI EN 1807-1 : 2013 | SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 1: TABLE BAND SAWS AND BAND RE-SAWS |
| 10/30235571 DC : DRAFT DEC 2010 | BS EN 13418 - PLASTICS AND RUBBER MACHINES - WINDING MACHINES FOR FILM OR SHEET - SAFETY REQUIREMENTS |
| 01/712575 DC : DRAFT SEP 2001 | ISO 13849-2 - SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEM - PART 2: VALIDATION |
| 05/30135987 DC : 0 | EN 161 - AUTOMATIC SHUT-OFF VALVES FOR GAS BURNERS AND GAS APPLIANCES |
| DD ENV 50234:1997 | Aeronautical ground lighting electrical installation. Flashing lights. Equipment specifications and tests |
| 12/30265270 DC : 0 | BS EN 1870-6 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 6: CIRCULAR SAWING MACHINES FOR FIREWOOD AND DUAL PURPOSE CIRCULAR SAWING MACHINES FOR FIREWOOD/CIRCULAR SAW BENCHES, WITH MANUAL LOADING AND/OR UNLOADING |
| BS EN 50176:2009 | Stationary electrostatic application equipment for ignitable liquid coating material. Safety requirements |
| 10/30232425 DC : DRAFT DEC 2010 | BS EN 1870-15 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 15: MULTI-BLADE CROSS-CUT SAWING MACHINES WITH INTEGRATED FEED OF THE WORKPIECE AND MANUAL LOADING AND/OR UNLOADING |
| DIN EN 15502-1:2015-10 | Gas-fired heating boilers - Part 1: General requirements and tests (includes Amendment A1:2015) |
| DIN EN 50446:2007-04 | STRAIGHT THERMOCOUPLE ASSEMBLY WITH METAL OR CERAMIC PROTECTION TUBE AND ACCESSORIES |
| BS EN 62820-1-1:2016 | Building intercom systems System requirements. General |
| EN 60598-1:2015/A1:2018 | LUMINAIRES - PART 1: GENERAL REQUIREMENTS AND TESTS |
| BS EN 15571:2014 | Machines and plants for mining and tooling of natural stone. Safety. Requirements for surface finishing machines |
| DIN EN 60928 : 2000 | AUXILIARIES FOR LAMPS - A.C. SUPPLIED ELECTRONIC BALLASTS FOR TUBULAR FLUORESCENT LAMPS - GENERAL AND SAFETY REQUIREMENTS |
| BS EN 60694:1997 | Common specifications for high-voltage switchgear and controlgear standards |
| 08/30184648 DC : DRAFT SEP 2008 | BS EN 15859 - AIR QUALITY - CERTIFICATION OF AUTOMATED DUST ARRESTMENT PLANT MONITORS FOR USE ON STATIONARY SOURCES - PERFORMANCE CRITERIA AND TEST PROCEDURES |
| 11/30254129 DC : 0 | BS EN 12547 - CENTRIFUGES - COMMON SAFETY REQUIREMENTS |
| 00/541591 DC : DRAFT DEC 2000 | BS EN 13463-2 - NON-ELECTRICAL EQUIPMENT INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 2: PROTECTION BY FLOW RESTRICTING ENCLOSURE "FR" |
| BS EN ISO 18081:2016 | Non-destructive testing. Acoustic emission testing (AT). Leak detection by means of acoustic emission |
| PREN 12098-5 : DRAFT 2015 | CONTROLS FOR HEATING SYSTEMS - PART 5: START-STOP SCHEDULERS FOR HEATING SYSTEMS - MODULES M3-5, 6, 7, 8 |
| PREN 13976-2 : DRAFT 2016 | RESCUE SYSTEMS - TRANSPORTATION OF INCUBATORS - PART 2: SYSTEM REQUIREMENTS |
| 10/30227080 DC : DRAFT JUNE 2010 | BS EN 691-1 - SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS |
| UNI EN 16207 : 2014 | RAILWAY APPLICATIONS - BRAKING - FUNCTIONAL AND PERFORMANCE CRITERIA OF MAGNETIC TRACK BRAKE SYSTEMS FOR USE IN RAILWAY ROLLING STOCK |
| DIN EN 12405-3:2016-04 | Gas meters - Conversion devices - Part 3: Flow computer |
| BS EN 60728-14:2014 | Cable networks for television signals, sound signals and interactive services Optical transmission systems using RFoG technology |
| BS EN 50300:2004 | Low-voltage switchgear and controlgear assemblies. General requirements for low-voltage substation cable distribution boards |
| BS EN 60838-2-1 : 1997 | MISCELLANEOUS LAMPHOLDERS - PART 2: PARTICULAR REQUIREMENTS - SECTION 1: LAMPHOLDERS S14 |
| BS EN 16314:2013 | Gas meters. Additional functionalities |
| 13/30284894 DC : 0 | BS EN 50223 - STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE FLOCK MATERIAL - SAFETY REQUIREMENTS |
| 04/30124330 DC : 0 | EN 15067-1 - PLASTICS AND RUBBER MACHINES - WELDING MACHINES FOR PLASTICS - PART 1: SAFETY REQUIREMENTS FOR FILM CONVERTING MACHINES FOR BAGS AND SACKS |
| BS EN 14989-2:2007 | Chimneys. Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications Flue and air supply ducts for room sealed appliances |
| 11/30238993 DC : 0 | BS EN 1648-2 - LEISURE ACCOMMODATION VEHICLES - 12 V DIRECT CURRENT EXTRA LOW VOLTAGE ELECTRICAL INSTALLATIONS - PART 2: MOTOR CARAVANS |
| 14/30303747 DC : 0 | BS EN 16282-3 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 3: KITCHEN VENTILATION CEILINGS; DESIGN AND SAFETY REQUIREMENTS |
| CEI EN 50411-2-5 : 2010 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-5: SEALED CLOSURES FOR AIR BLOWN FIBRE MICRODUCT, TYPE 1, FOR CATEGORY S & A |
| I.S. EN 16282-8:2017 | EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 8: INSTALLATIONS FOR TREATMENT OF AEROSOL - REQUIREMENTS AND TESTING |
| CEI EN 61076-2-113 : 1ED 2017 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-113: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CONNECTORS WITH M12 SCREW LOCKING WITH POWER AND SIGNAL CONTACTS FOR DATA TRANSMISSION WITH FREQUENCY UP TO 100 MHZ |
| BS EN 50464-2-3:2007 | Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2500 kVA with highest voltage for equipment not exceeding 36 kV Distribution transformers with cable boxes on the high-voltage and/or low-voltage side. Cable boxes type 2 for use on distribution transformers meeting the requirements of EN 50464-2-1 |
| I.S. EN 45510-2-9:2008 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-9: ELECTRICAL EQUIPMENT - CABLING SYSTEMS |
| 06/30150265 DC : 0 | EN 1474-1 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS |
| 00/107021 DC : DRAFT OCT 2000 | BS EN 1501-2 - REFUSE COLLECTION VEHICLES AND THEIR ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 2: SIDE LOADED REFUSE COLLECTION VEHICLES |
| DIN EN 16479 E : 2014 | WATER QUALITY - PERFORMANCE REQUIREMENTS AND CONFORMITY TEST PROCEDURES FOR WATER MONITORING EQUIPMENT - AUTOMATED SAMPLING DEVICES (SAMPLERS) FOR WATER AND WASTE WATER |
| DIN EN 16191 E : 2014 | TUNNELLING MACHINERY - SAFETY REQUIREMENTS |
| DD CEN/TS 15213-6:2011 | Road transport and traffic telematics. After-theft services for the recovery of stolen vehicles Test procedures |
| 16/30344390 DC : 0 | BS EN 13216-1 - CHIMNEYS - TEST METHODS FOR SYSTEM CHIMNEYS - PART 1: GENERAL TEST METHODS |
| CEI EN 60044-8 : 2004 | INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRASFORMERS |
| I.S. EN 61869-1:2009 | INSTRUMENT TRANSFORMERS - PART 1: GENERAL REQUIREMENTS |
| 00/715165 DC : DRAFT OCT 2000 | BS EN 13954 - FOOD PROCESSING MACHINERY - BREAD SLICERS - SAFETY AND HYGIENE REQUIREMENTS |
| 14/30298206 DC : 0 | BS EN 1570-2 - SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 2: LIFTING TABLES SERVING MORE THAN 2 FIXED LANDINGS OF A BUILDING, FOR LIFTING GOODS WITH A VERTICAL TRAVEL SPEED NOT EXCEEDING 0,15 M/S |
| XP CEN/TS 45545-4 : 2009 XP | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 4: FIRE SAFETY REQUIREMENTS FOR RAILWAY ROLLING STOCK DESIGN |
| 00/705373 DC : DRAFT FEB 2000 | PREN 13836 - GAS-FIRED CENTRAL HEATING BOILERS - TYPE B BOILERS OF NOMINAL HEAT INPUT EXCEEDING 300 KW BUT NOT EXCEEDING 1000 KW |
| BS EN 175301-803:2006 | Detail specification: rectangular connectors. Flat contacts, 0,8 mm thickness, locking screw not detachable |
| UNI EN 15431 : 2008 | WINTER AND ROAD SERVICE AREA MAINTENANCE EQUIPMENTS - POWER SYSTEM AND RELATED CONTROLS - INTERCHANGEABILITY AND PERFORMANCE REQUIREMENTS |
| CLC/TS 50537-1:2010 | Railway applications - Mounted parts of the traction transformer and cooling system - Part 1: HV bushing for traction transformers |
| 07/30137492 DC : 0 | EN 15654-1 - RAILWAY APPLICATIONS - MEASUREMENT OF WHEEL AND AXLE LOADS - PART 1: INTEROPERABLE 'IN-SERVICE' RAIL VEHICLES |
| 07/30166912 DC : DRAFT AUG 2007 | BS EN 15714-3 - INDUSTRIAL VALVES - ACTUATORS - PART 3: PNEUMATIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| I.S. EN 60204-11:2000 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES PART 11: REQUIREMENTS FOR HV EQUIPMENT FOR VOLTAGES ABOVE 1000 V A.C. OR 1500 V D.C. AND NOT EXCEEDING 36 KV |
| BS EN 61241-11:2006 | Electrical apparatus for use in the presence of combustible dust Protection by intrinsic safety \'iD\' |
| EN 61008-1:2012/A12:2017 | RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITHOUT INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCCBS) - PART 1: GENERAL RULES (IEC 61008-1:2010, MODIFIED) |
| 96/108457 DC : DRAFT NOV 1996 | PREN 12650-2 - BUILDING HARDWARE - POWERED PEDESTRIAN DOORS - PART 2: SAFETY AT POWERED PEDESTRIAN DOORS |
| BS EN 15714-4:2009 | Industrial valves. Actuators Hydraulic part-turn actuators for industrial valves. Basic requirements |
| BS EN 50131-2-3:2008 | Alarm systems. Intrusion and hold-up systems Requirements for microwave detectors |
| 08/30182786 DC : DRAFT JULY 2008 | BS EN 13977 - RAILWAY APPLICATIONS - TRACK - SAFETY REQUIREMENTS FOR PORTABLE MACHINES AND TROLLEYS FOR CONSTRUCTION AND MAINTENANCE |
| BS EN 3660-063:2015 | Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors Cable outlet, style K, straight, for heat shrinkable boot, shielded, sealed, self-locking for EN 3645. Product standard |
| I.S. EN 13035-11:2006 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 11: DRILLING MACHINES |
| CEI EN 61514 : 2002 | INDUSTRIAL-PROCESS CONTROL SYSTEMS - METHODS OF EVALUATING THE PERFORMANCE OF VALVE POSITIONERS WITH PNEUMATIC OUTPUTS |
| PREN 12013 : DRAFT 2015 | PLASTICS AND RUBBER MACHINES - INTERNAL MIXERS - SAFETY REQUIREMENTS |
| 09/30193293 DC : DRAFT MAR 2009 | BS EN 12184 - ELECTRICALLY POWERED WHEELCHAIRS, SCOOTERS AND THEIR CHARGERS - REQUIREMENTS AND TEST METHODS |
| DIN EN 1870-19:2014-03 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS |
| PREN 14236 : DRAFT 2017 | ULTRASONIC DOMESTIC GAS METERS |
| BS EN 88528-11:2004 | Reciprocating internal combustion engine driven alternating current generating sets Rotary uninterruptible power systems. Performance requirements and test methods |
| CEI CLC/TS 50535 : 2011 | RAILWAY APPLICATIONS - ONBOARD AUXILIARY POWER CONVERTER SYSTEMS |
| UNE-EN 62282-3-1:2011 | Fuel cell technologies - Part 3-1: Stationary fuel cell power systems - Safety |
| BS EN 1870-18:2013 | Safety of woodworking machines. Circular sawing machines Dimension saws |
| DIN EN 1570-2:2014-06 (Draft) | SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 2: LIFTING TABLES SERVING MORE THAN 2 FIXED LANDINGS OF A BUILDING, FOR LIFTING GOODS WITH A VERTICAL TRAVEL SPEED NOT EXCEEDING 0,15 M/S |
| 12/30260709 DC : 0 | BS EN 50436-1 - ALCOHOL INTERLOCKS - TEST METHODS AND PERFORMANCE REQUIREMENTS - PART 1: INSTRUMENTS FOR DRINK-DRIVING-OFFENDER PROGRAMS |
| EN 15714-2:2009 | Industrial valves - Actuators - Part 2: Electric actuators for industrial valves - Basic requirements |
| DD ENV 12796:1997 | Road transport and traffic telematics. Public transport. Validators |
| 10/30214970 DC : 0 | BS EN 13616 - OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID PETROLEUM FUELS |
| BS EN 61508-7:2010 | Functional safety of electrical/electronic/ programmable electronic safety related systems Overview of techniques and measures |
| I.S. EN 848-3:2012 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES |
| UNE-EN 50194-2:2007 | Electrical apparatus for the detection of combustible gases in domestic premises - Part 2: Electrical apparatus for continuous operation in a fixed installation in recreational vehicles and similar premises - Additional test methods and performance requirements |
| UNI EN 15162 : 2008 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY REQUIREMENTS FOR GANG SAWS |
| 05/30076959 DC : DRAFT APR 2005 | BS EN 12453 - INDUSTRIAL COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY IN USE OF POWER-OPERATED DOORS - REQUIREMENTS |
| 12/30274114 DC : 0 | BS EN 50600-2-5 - DATA CENTRE FACILITIES AND INFRASTRUCTURES - PART 2-5: SECURITY SYSTEMS |
| BS EN 81-31:2010 | Safety rules for the construction and installation of lifts. Lifts for the transport of goods only Accessible goods only lifts |
| 11/30215034 DC : DRAFT MAR 2011 | BS EN 12159 - BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES |
| 11/30237560 DC : 0 | BS EN 1870-12 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 12: PENDULUM CROSS-CUT SAWING MACHINES |
| I.S. EN 13463-8:2003 | NON-ELECTRICAL EQUIPMENT FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 8: PROTECTION BY LIQUID IMMERSION 'K' |
| BS EN 54-16:2008 | Fire detection and fire alarm systems Voice alarm control and indicating equipment |
| I.S. EN 13616:2004 | OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID PETROLEUM FUELS |
| PREN 14678-1 : DRAFT 2010 | LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS |
| UNI EN 1501-5 : 2011 | REFUSE COLLECTION VEHICLES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 5: LIFTING DEVICES FOR REFUSE COLLECTION VEHICLES |
| 14/30297842 DC : 0 | BS EN 15163 - MACHINES AND INSTALLATIONS FOR THE EXPLOITATION AND PROCESSING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR DIAMOND WIRE SAWS AND DIAMOND MULTI-WIRE SAWS |
| PREN 50050-3 : DRAFT 2011 | ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 3: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE FLOCK |
| DIN EN 303-1:2016-07 (Draft) | HEATING BOILERS - PART 1: HEATING BOILERS WITH FORCED DRAUGHT BURNERS - TERMINOLOGY, GENERAL REQUIREMENTS, TESTING AND MARKING |
| PREN 1175 : DRAFT 2017 | SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL/ELECTRONIC REQUIREMENTS |
| 08/30183361 DC : DRAFT JUNE 2008 | BS EN 50524 - DATA SHEET AND NAME PLATE FOR PHOTOVOLTAIC INVERTERS |
| DD CLC/TS 50537-4:2010 | Railway applications. Mounted parts of the traction transformer and cooling system Gas and liquid actuated (Buchholz) relay for liquid immersed transformers and reactors with conservator for rail vehicles |
| CEI EN 60728-4 : 2008 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 4: PASSIVE WIDEBAND EQUIPMENT FOR COAXIAL CABLE NETWORKS |
| PREN 50050-2 : DRAFT 2011 | ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 2: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE COATING POWDER |
| 05/30136802 DC : 0 | EN 15267-3 - AIR QUALITY - CERTIFICATION OF AUTOMATED MEASURING SYSTEMS - PART 3: PERFORMANCE SPECIFICATIONS AND TEST PROCEDURES FOR AUTOMATED MEASURING SYSTEMS FOR MONITORING EMISSIONS FROM STATIONARY SOURCES |
| PREN 848-3 : DRAFT 2010 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOLS - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES |
| EN 62689-1:2016 | Current and voltage sensors or detectors, to be used for fault passage indication purposes - Part 1: General principles and requirements |
| 15/30296744 DC : 0 | BS EN 12013 - PLASTICS AND RUBBER MACHINES - INTERNAL MIXERS - SAFETY REQUIREMENTS |
| BS EN 12405-3:2015 | Gas meters. Conversion devices Flow computer |
| S.R. CLC/TS 50131-2-7-2:2009 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-2: INTRUSION DETECTORS - GLASS BREAK DETECTORS (PASSIVE) |
| DD CLC/TS 50131-4:2006 | Alarm systems. Intrusion and hold-up systems Warning devices |
| BS EN 15162:2008 | Machines and plants for mining and tooling of natural stone. Safety requirements for gang saws |
| BS EN 50088:1996 | Safety of electric toys |
| 02/540110 DC : DRAFT FEB 2002 | BS EN 13463-8 - NON-ELECTRICAL EQUIPMENT FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 8: PROTECTION BY LIQUID IMMERSION 'K' |
| BS EN 12012-1 : 2007 | PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS |
| 07/30166811 DC : 0 | BS EN ISO 23125 - SAFETY OF MACHINE TOOLS - TURNING MACHINES |
| DIN EN 1501-5:2012-02 | Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting devices for refuse collection vehicles |
| DIN EN 15572:2015-12 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES |
| 05/30134824 DC : 0 | EN 50447 - ACTIVE IMPLANTABLE MEDICAL DEVICES - PARTICULAR REQUIREMENTS FOR HEART-LUNG MACHINES (HLM) |
| I.S. EN 61812-1:2011 | TIME RELAYS FOR INDUSTRIAL AND RESIDENTIAL USE - PART 1: REQUIREMENTS AND TESTS |
| 02/705771 DC : DRAFT AUG 2002 | PREN 81-71 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PARTICULAR APPLICATIONS TO PASSENGER LIFTS AND GOODS PASSENGER LIFTS - PART 71: VANDAL RESISTANT LIFTS |
| 14/30302140 DC : 0 | BS EN 1459-1 - ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 1: VARIABLE-REACH TRUCKS |
| BS EN 61048 : 2006 | AUXILIARIES FOR LAMPS - CAPACITORS FOR USE IN TUBULAR FLUORESCENT AND OTHER DISCHARGE LAMP CIRCUITS - GENERAL AND SAFETY REQUIREMENTS |
| EN 1218-2:2004+A1:2009 | Safety of woodworking machines - Tenoning machines - Part 2: Double end tenoning and/or profiling machines fed by chain or chains |
| CEN/TR 12101-4:2009 | Smoke and heat control systems - Part 4: Installed SHEVS systems for smoke and heat ventilation |
| PREN 16282-3 : DRAFT 2014 | EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 3: KITCHEN VENTILATION CEILINGS; DESIGN AND SAFETY REQUIREMENTS |
| 12/30263881 DC : 0 | BS EN 1870-3 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 3: DOWN CUTTING CROSS-CUT SAWS AND DUAL PURPOSE DOWN CUTTING CROSS-CUT SAWS/CIRCULAR SAW BENCHES |
| BS EN 50617-2:2015 | Railway Applications. Technical parameters of train detection systems for the interoperability of the trans-European railway system Axle counters |
| I.S. EN 50532:2010 | COMPACT EQUIPMENT ASSEMBLY FOR DISTRIBUTION SUBSTATIONS (CEADS) |
| I.S. EN 60726:2003 | DRY-TYPE POWER TRANSFORMERS |
| I.S. EN 12478:2000 | SAFETY OF MACHINE TOOLS - LARGE NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES |
| UNE-EN 50463-3:2013 | Railway applications - Energy measurement on board trains - Part 3: Data handling |
| UNE-EN 81-41:2011 | Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 41: Vertical lifting platforms intended for use by persons with impaired mobility |
| BS EN 1501-5:2011 | Refuse collection vehicles. General requirements and safety requirements Lifting devices for refuse collection vehicles |
| I.S. EN 60079-2:2014 | EXPLOSIVE ATMOSPHERES - PART 2: EQUIPMENT PROTECTION BY PRESSURIZED ENCLOSURE 'P' |
| BS EN 62115 : 2005 | ELECTRIC TOYS - SAFETY |
| BS EN 1570-2:2016 | Safety requirements for lifting tables Lifting tables serving more than 2 fixed landings of a building, for lifting goods with a vertical travel speed not exceeding 0,15 m/s |
| UNE-EN 50464-2-2:2010 | Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2 500 kVA with highest voltage for equipment not exceeding 36 kV - Part 2-2: Distribution transformers with cable boxes on the high-voltage and/or low-voltage side - Cable boxes type 1 for use on distribution transformers meeting the requirements of EN 50464-2-1 |
| BS EN 60770-3:2014 | Transmitters for use in industrial-process control systems Methods for performance evaluation of intelligent transmitters |
| CEI EN 50131-2-7-2 : 2013 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-2: INTRUSION DETECTORS - GLASS BREAK DETECTORS (PASSIVE) |
| UNE-EN 50617-1:2015 | Railway applications - Technical parameters of train detection systems for the interoperability of the trans-European railway system - Part 1: Track circuits |
| 13/30281710 DC : 0 | BS EN 62444 - CABLE GLANDS FOR ELECTRICAL INSTALLATIONS |
| BS EN 16282-3:2016 | Equipment for commercial kitchens. Components for ventilation in commercial kitchens Kitchen ventilation ceilings; design and safety requirements |
| CEI EN 50125-3 : 2004 | RAILWAY APPLICATIONS - ENVIRONMENTAL CONDITIONS FOR EQUIPMENT - PART 3: EQUIPMENT FOR SIGNALLING AND TELECOMMUNICATIONS |
| DIN EN 81-41:2016-06 (Draft) | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 41: VERTICAL LIFTING PLATFORMS INTENDED FOR USE BY PERSONS WITH IMPAIRED MOBILITY |
| 14/30310338 DC : 0 | BS EN 609-1 - AGRICULTURAL AND FORESTRY MACHINERY - SAFETY OF LOG SPLITTERS - PART 1: WEDGE SPLITTERS |
| BS EN 60947-1 : 2007 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES |
| UNI EN 15714-2 : 2009 | INDUSTRIAL VALVES - ACTUATORS - PART 2: ELECTRIC ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| 07/30172338 DC : DRAFT DEC 2007 | BS EN 1114-1 - PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 1: SAFETY REQUIREMENTS FOR EXTRUDERS |
| NF EN 60068 2-17 : 1995 | ENVIRONMENTAL TESTING - PART 2: TESTS - TEST Q: SEALING |
| BS EN 50123-2:2003 | Railway applications. Fixed installations. D.C. switchgear D.C. circuit breakers |
| 14/30316181 DC : 0 | BS EN 50628 - ERECTION OF ELECTRICAL INSTALLATIONS IN UNDERGROUND MINES |
| 11/30233197 DC : 0 | BS EN 61008-1 - RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITHOUT INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCCBS) - PART 1: GENERAL RULES |
| DD CEN/TS 45545-4:2009 | Railway applications. Fire protection on railway vehicles Fire safety requirements for railway rolling stock design |
| BS EN 60947-5-3:2013 | Low-voltage switchgear and controlgear Control circuit devices and switching elements. Requirements for proximity devices with defined behaviour under fault conditions (PDDB) |
| 13/30286135 DC : 0 | BS EN 13616-1 - OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID FUELS - REQUIREMENTS AND TEST/ASSESSMENT METHODS - PART 1: OVERFILL PREVENTION DEVICES WITH CLOSURE DEVICE |
| EN 50556:2011 | Road traffic signal systems |
| NF EN 50543 : 2011 | ELECTRONIC PORTABLE AND TRANSPORTABLE APPARATUS DESIGNED TO DETECT AND MEASURE CARBON DIOXIDE AND/OR CARBON MONOXIDE IN INDOOR AMBIENT AIR - REQUIREMENTS AND TEST METHODS |
| 02/564996 DC : DRAFT NOV 2002 | BS EN ISO 16201 - TECHNICAL AIDS FOR DISABLED PERSONS - REMOTE CONTROL SYSTEMS |
| DD CEN/TS 81-83:2009 | Safety rules for the construction and installation of lifts. Existing lifts Rules for the improvement of the resistance against vandalism |
| 12/30257022 DC : 0 | BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - GENERAL REQUIREMENTS |
| 00/708470 DC : DRAFT APR 2000 | PREN 13886 - FOOD PROCESSING MACHINERY - COOKING KETTLES EQUIPPED WITH STIRRER AND/OR MIXER - SAFETY AND HYGIENE |
| EN IEC 61058-1:2018 | Switches for appliances - Part 1: General requirements |
| NF EN 15774 : 2011 | FOOD PROCESSING MACHINERY - MACHINES FOR PROCESSING FRESH AND FILLED PASTA (TAGLIATELLE, CANNELLONI, RAVIOLI, TORTELLINI, ORECCHIETTE AND GNOCCHI) - SAFETY AND HYGIENE REQUIREMENTS |
| UNE-EN 15433-6:2016 | Transportation loads - Measurement and evaluation of dynamic-mechanical loads - Part 6: Automatic recording systems for measuring randomly occurring shock during monitoring of transports |
| 09/30208493 DC : 0 | BS EN 16009 - FLAMELESS EXPLOSION VENTING DEVICES (TYPE C STANDARD) |
| EN 1034-1:2000+A1:2010 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 1: Common requirements |
| I.S. EN 81-22:2014 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 22: ELECTRIC LIFTS WITH INCLINED PATH |
| 04/30115398 DC : DRAFT JUN 2004 | EN TS 50436 - ALCOHOL INTERLOCKS - TEST METHODS AND PERFORMANCE REQUIREMENTS |
| I.S. EN 61076-2-101:2012 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-101: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR M12 CONNECTORS WITH SCREW-LOCKING (IEC 61076-2-101:2012 (EQV)) |
| BS EN 15163:2017 | Machines and installations for the exploitation and processing of natural stone. Safety. Requirements for diamond wire saws |
| DIN V ENV 50091-3 : 2000 | UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 3: PERFORMANCE REQUIREMENTS |
| BS 7821-2.3:1998 | Three phase oil-immersed distribution transformers, 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not exceeding 36 kV. Distribution transformers with cable boxes on the high voltage and/or low voltage side Cable boxes type 2 for use on distribution transformers meeting the requirements of BS 7821-2.1 |
| BS EN 61241-0:2006 | Electrical apparatus for use in the presence of combustible dust General requirements |
| UNI EN 1501-3 : 2008 | REFUSE COLLECTION VEHICLES AND THEIR ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 3: FRONT LOADED REFUSE COLLECTION VEHICLES |
| 08/30185056 DC : DRAFT SEP 2008 | BS EN 15861 - FOOD PROCESSING MACHINERY - SMOKE FACILITIES - SAFETY AND HYGIENE REQUIREMENTS |
| 12/30260007 DC : 0 | BS EN 15091 - SANITARY TAPWARE - ELECTRONIC OPENING AND CLOSING SANITARY TAPWARE |
| BS EN 16207:2014 | Railway applications. Braking. Functional and performance criteria of Magnetic Track Brake systems for use in railway rolling stock |
| CEI EN 62314 : 2007 | SOLID-STATE RELAYS |
| CEI CLC/TR 50488 : 2007 | RAILWAY APPLICATIONS - SAFETY MEASURES FOR PERSONNEL WORKING NEAR OVERHEAD CONTACT LINES |
| CEI EN 61386-1 : 2009 | CONDUIT SYSTEMS FOR CABLE MANAGEMENT - PART 1: GENERAL REQUIREMENTS |
| CEI EN 50133-2-1 : 2001 | ALARM SYSTEMS ACCESS CONTROL SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 2-1: GENERAL REQUIREMENTS FOR COMPONENTS |
| 12/30254956 DC : 0 | BS EN 26 - GAS-FIRED INSTANTANEOUS WATER HEATERS FOR THE PRODUCTION OF DOMESTIC HOT WATER |
| DIN EN 60922 : 1997 | AUXILIARIES FOR LAMPS - BALLASTS FOR DISCHARGE LAMPS (EXCLUDING TUBULAR FLUORESCENT LAMPS) - GENERAL AND SAFETY REQUIREMENTS |
| DIN EN 16340:2014-10 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - COMBUSTION PRODUCT SENSING DEVICES |
| PREN 13870 : DRAFT 2013 | FOOD PROCESSING MACHINERY - PORTION CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| 11/30248845 DC : 0 | BS EN 50050-2:2011 - ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 2: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE COATING POWDER |
| DD CLC/TS 50131-2-7-1:2009 | Alarm systems. Intrusion and hold-up systems Intrusion detectors. Glass break detectors (acoustic) |
| CEI EN 50065-4-7 : 2007 | SIGNALLING ON LOW-VOLTAGE ELECTRICAL INSTALLATIONS IN THE FREQUENCY RANGE 3 KHZ TO 148,5 KHZ AND FROM 1,6 MHZ TO 30 MHZ - PART 4-7: PORTABLE LOW VOLTAGE DECOUPLING FILTERS - SAFETY REQUIREMENTS |
| PREN 419 : DRAFT 2017 | GAS-FIRED OVERHEAD LUMINOUS RADIANT HEATERS FOR NONDOMESTIC USE - SAFETY AND ENERGY EFFICIENCY |
| 11/30247615 DC : 0 | BS EN 16314 - GAS METERS - ADDITIONAL FUNCTIONALITIES |
| 95/710329 DC : DRAFT JUL 1995 | PREN 12042 - FOOD PROCESSING MACHINERY - AUTOMATIC DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 1829-1 : 2010 | HIGH-PRESSURE WATER JET MACHINES - SAFETY REQUIREMENTS - PART 1: MACHINES |
| CLC/TS 50131-2-11:2017 | Alarm systems - Intrusion and hold-up systems - Part 2-11: Intrusion detectors - ALDDR |
| PREN 1755 : DRAFT 2013 | SAFETY OF INDUSTRIAL TRUCKS - OPERATION IN POTENTIALLY EXPLOSIVE ATMOSPHERES - USE IN FLAMMABLE GAS, VAPOUR, MIST AND DUST |
| NF EN 15595 : 2009 + A1 2011 | RAILWAY APPLICATIONS - BRAKING - WHEEL SLIDE PROTECTION |
| PREN 13204 : DRAFT 2015 | DOUBLE ACTING HYDRAULIC RESCUE TOOLS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS |
| 15/30318313 DC : 0 | BS EN 15267-4 - AIR QUALITY - CERTIFICATION OF AUTOMATED MEASURING SYSTEMS - PART 4: PERFORMANCE CRITERIA AND TEST PROCEDURES FOR AUTOMATED MEASURING SYSTEMS FOR PERIODIC MEASUREMENTS OF EMISSIONS FROM STATIONARY SOURCE |
| 05/30133333 DC : DRAFT MAY 2005 | EN 860 - SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANING MACHINES |
| 11/30247562 DC : 0 | BS EN 12042 - FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS |
| 15/30324474 DC : 0 | BS EN 16893 - CONSERVATION OF CULTURAL HERITAGE - NEW SITES AND BUILDINGS INTENDED FOR THE STORAGE AND USE OF COLLECTIONS |
| UNE-EN 1570-2:2017 | Safety requirements for lifting tables - Part 2: Lifting tables serving more than 2 fixed landings of a building, for lifting goods with a vertical travel speed not exceeding 0,15 m/s |
| BS EN 15431:2008 | Winter and road service area maintenance equipments. Power system and related controls. Interchangeability and performance requirements |
| 05/19981975 DC : DRAFT JUN 2005 | BS EN 1034-2 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 2: BARKING DRUMS |
| BS EN 1474-1:2008 | Installation and equipment for liquefied natural gas. Design and testing of marine transfer systems Design and testing of transfer arms |
| 15/30329549 DC : 0 | BS EN 50463-3 - RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 3: DATA HANDLING |
| BS EN 50516-3-1:2014 | Industrial connector sets and interconnect components to be used in optical fibre control and communication systems. Product specifications Type ODVA APC terminated on EN 60793-2-50 category B1.1 and B1.3 singlemode fibre to meet the requirements of category I (industrial environments) as specified in EN 50173-1 and IEC 61753-1-3 |
| 14/30292850 DC : 0 | BS EN 12779 - SAFETY OF WOODWORKING MACHINES - CHIPS AND DUST EXTRACTION SYSTEMS WITH FIXED INSTALLATIONS - SAFETY REQUIREMENTS |
| BS EN 62561-6:2011 | Lightning protection system components (LPSC) Requirements for lightning strike counters (LSC) |
| BS EN 50272-2:2001 | Safety requirements for secondary batteries and battery installations Stationary batteries |
| I.S. EN 50133-2-1:2001 | ALARM SYSTEMS - ACCESS CONTROL SYSTEMS FOR USE IN SECURITY APPLICATIONS - GENERAL REQUIREMENTS FOR COMPONENTS |
| DD CLC/TS 50131-2-2:2004 | Alarm systems. Intrusion systems Requirements for passive infrared detectors |
| UNE-EN 60065:2015 | Audio, video and similar electronic apparatus - Safety requirements |
| 12/30268301 DC : 0 | BS EN 16486 - MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS |
| I.S. EN 50091-1:1993 | UNINTERRUPTIBLE POWER SYSTEMS (UPS) - GENERAL AND SAFETY REQUIREMENTS |
| 00/541672 DC : DRAFT NOV 2000 | BS EN 14043 - AUTOMATIC TURNTABLE LADDERS FOR FIRE SERVICE USE - REQUIREMENTS AND TEST METHODS |
| I.S. EN 16893:2018 | CONSERVATION OF CULTURAL HERITAGE - SPECIFICATIONS FOR LOCATION, CONSTRUCTION AND MODIFICATION OF BUILDINGS OR ROOMS INTENDED FOR THE STORAGE OR USE OF HERITAGE COLLECTIONS |
| 02/103832 DC : DRAFT MAY 2002 | PREN 1648-1 - LEISURE ACCOMMODATION VEHICLES - 12 V DIRECT CURRENT EXTRA LOW VOLTAGE ELECTRICAL INSTALLATIONS - PART 1: CARAVANS |
| 03/110059 DC : 0 | BS EN 45545-4 - RAILWAY APPLICATIONS - FIRE PROTECTION OF RAILWAY VEHICLES - PART 4: FIRE SAFETY REQUIREMENTS OF RAILWAY ROLLING STOCK DESIGN |
| I.S. EN 50490:2008 | ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - TECHNICAL REQUIREMENTS FOR AERONAUTICAL GROUND LIGHTING CONTROL AND MONITORING SYSTEMS - UNITS FOR SELECTIVE SWITCHING AND MONITORING OF INDIVIDUAL LAMPS |
| UNE-EN 15714-4:2010 | Industrial valves - Actuators - Part 4: Hydraulic part-turn actuators for industrial valves - Basic requirements |
| CEI EN 61347-1 : 2016 | LAMP CONTROLGEAR - PART 1: GENERAL AND SAFETY REQUIREMENTS |
| BS EN 60439-5:2006 | Low-voltage switchgear and controlgear assemblies Particular requirements for assemblies for power distribution in public networks |
| 08/30175652 DC : DRAFT SEP 2008 | BS EN 1248 AMD1 - FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR ABRASIVE BLASTING EQUIPMENT |
| I.S. EN 1672-1:2014 | FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS |
| DIN EN 1870-18:2013-08 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 18: DIMENSION SAWS |
| I.S. EN 15571:2014 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES |
| CEI UNI EN 45510-6-6 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 6-6: TURBINE AUXILIARIES - WET AND WET/DRY COOLING TOWERS |
| 02/106354 DC : DRAFT OCT 2002 | EN 12966-2 - VERTICAL ROAD TRAFFIC SIGNS - PART 2: VARIABLE MESSAGE SIGNS - INITIAL TYPE TESTING |
| BS EN 54-24:2008 | Fire detection and fire alarm systems Components of voice alarm systems. Loudspeakers |
| EN IEC 61076-3-119:2018 | Connectors for electrical and electronic equipment - Product requirements - Part 3-119: Rectangular connectors - Detail specification for shielded and unshielded, free and fixed 10-way connectors with push-pull coupling for industrial environments for data transmission with frequencies up to 100 MHz |
| PREN 15609 : DRAFT 2010 | LPG EQUIPMENT AND ACCESSORIES - LPG PROPULSION SYSTEMS FOR BOATS, YACHTS AND OTHER CRAFT - INSTALLATION REQUIREMENTS |
| PREN 15180 : DRAFT 2011 | FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS |
| CEI UNI EN 12966-1 : 2010 | ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS - PART 1: - PRODUCT STANDARD |
| CEI EN 50524 : 2010 | DATA SHEET AND NAME PLATE FOR PHOTOVOLTAIC INVERTERS |
| CEI CLC/TS 50131-2-8 : 2013 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-8: INTRUSION DETECTORS - SHOCK DETECTORS |
| BS EN 16327:2014 | Fire-fighting. Positive-pressure proportioning systems (PPPS) and compressed-air foam systems (CAFS) |
| PREN 50130-5 : DRAFT 2010 | ALARM SYSTEMS - PART 5: ENVIRONMENTAL TEST METHODS |
| CEI 216-5/3 : 2002 | ELECTRICAL EQUIPMENT FOR THE DETECTION AND THE MEASUREMENT OF FLAMMABLE VAPOURS OR GASES OR TOXIC AND OF OXYGEN FOR CONTINUOUS OPERATION IN FIXED INSTALLATIONS IN NON-HAZARDOUS AREAS - PART 3:GENERAL REQUIREMENTS AND TEST METHODS FOR DETECTORS OF GASES AND FLAMMABLE VAPOURS WITH PROPORTIONAL OUTPUTS |
| BS EN 60726:2003 | Dry-type power transformers |
| CEI EN 60998-1 : 2005 | CONNECTING DEVICES FOR LOW-VOLTAGE CIRCUITS FOR HOUSEHOLD AND SIMILAR PURPOSES - PART 1: GENERAL REQUIREMENTS |
| CEI EN 60598-2-14 : 2010 | LUMINAIRES - PART 2-14: PARTICULAR REQUIREMENTS - LUMINAIRES FOR COLD CATHODE TUBULAR - DISCHARGE LAMPS (NEON TUBES) AND SIMILAR EQUIPMENT |
| BS EN 50524:2009 | Data sheet and name plate for photovoltaic inverters |
| DIN EN 50284 : 2000 | SPECIAL REQUIREMENTS FOR CONSTRUCTION, TEST AND MARKING OF ELECTRICAL APPARATUS OF EQUIPMENT GROUP II, CATEGORY 1 G |
| PREN 1034-3 : DRAFT 2011 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 3: REREELERS AND WINDERS |
| PREN 676 : DRAFT 2012 | FORCED DRAUGHT BURNERS FOR GASEOUS FUELS |
| CEI EN 60077-2 : 2002 | RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 2: ELECTROTECHNICAL COMPONENTS - GENERAL RULES |
| PREN 14504 : DRAFT 2017 | INLAND NAVIGATION VESSELS - FLOATING LANDING STAGES AND FLOATING BRIDGES ON INLAND WATERS - REQUIREMENTS, TESTS |
| CEI UNI EN 45510-2-5 : 2006 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-5: ELECTRICAL EQUIPMENT - MOTORS |
| 07/30170114 DC : 0 | BS EN 201 - PLASTICS AND RUBBER MACHINES - INJECTION MOULDING MACHINES - SAFETY REQUIREMENTS |
| 05/30137922 DC : DRAFT AUG 2005 | ISO 13865-3 - SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE-SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES |
| BS EN 60998-2-2:2004 | Connecting devices for low voltage circuits for household and similar purposes Particular requirements for connecting devices as separate entities with screwless-type clamping units |
| BS EN 62093:2005 | Balance-of-system components for photovoltaic systems. Design qualification natural environments |
| BS EN 50020:2002 | Electrical apparatus for potentially explosive atmospheres. Intrinsic safety \'i\' |
| 04/30126179 DC : DRAFT DEC 2004 | EN 15095 - POWER-OPERATED MOBILE RACKING AND SHELVING, CARROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS |
| BS EN 50130-5:2011 | Alarm systems Environmental test methods |
| PD CLC/TS 50131-2-8:2012 | Alarm systems. Intrusion and hold-up systems Intrusion detectors. Shock detectors |
| DIN EN 15268:2008-11 | PETROL FILLING STATIONS - SAFETY REQUIREMENTS FOR THE CONSTRUCTION OF SUBMERSIBLE PUMP |
| BS EN 60728-4:2008 | Cable networks for television signals, sound signals and interactive services Passive wideband equipment for coaxial cable networks |
| I.S. EN 15165:2014 | FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN 16500:2014-10 | MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS |
| 11/30245742 DC : 0 | BS EN 50131-10 - ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 10: APPLICATION SPECIFIC REQUIREMENTS FOR SUPERVISED PREMISES TRANSCEIVER (SPT) |
| 08/30184950 DC : DRAFT JULY 2008 | BS EN 50291-1 - ELECTRICAL APPARATUS FOR THE DETECTION OF CARBON MONOXIDE IN DOMESTIC PREMISES - PART 1: TEST METHODS AND PERFORMANCE REQUIREMENTS |
| 12/30258453 DC : 0 | BS EN 62368-1 AMD - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
| BS EN 61754-24-11:2009 | Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces Type SC-RJ connectors with protective housings based on IEC 61076-3-117 |
| 12/30260299 DC : 0 | BS EN 15165 - FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 50192:1996 | Arc welding equipment. Plasma cutting systems for manual use |
| 04/30124187 DC : 0 | PREN 415-8 - SAFETY OF PACKAGING MACHINES - PART 8: STRAPPING MACHINES |
| EN IEC 61204-7:2018 | Low-voltage switch mode power supplies - Part 7: Safety requirements |
| BS EN 13616-1:2016 | Overfill prevention devices for static tanks for liquid fuels Overfill prevention devices with closure device |
| 12/30235298 DC : DRAFT JAN 2012 | BS EN 50526-2 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 2: VOLTAGE LIMITING DEVICES |
| 07/30174053 DC : 0 | BS EN 41003 - PARTICULAR SAFETY REQUIREMENTS FOR EQUIPMENT TO BE CONNECTED TO TELECOMMUNICATION NETWORKS AND/OR A CABLE DISTRIBUTION SYSTEM |
| I.S. EN 81-41:2010 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 41: VERTICAL LIFTING PLATFORMS INTENDED FOR USE BY PERSONS WITH IMPAIRED MOBILITY |
| 04/19986707 DC : 0 | BS EN 1804-4 - MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 4: ELECTRO-HYDRAULIC CONTROL SYSTEMS |
| UNE-EN 50502:2016 | Railway applications - Rolling stock - Electric equipment in trolley buses - Safety requirements and current collection systems |
| DD CLC/TS 50457-1:2008 | Conductive charging for electric vehicles D.C. charging station |
| BS EN 15955-2:2013 | Railway applications. Track. Demountable machines and associated equipment General safety requirements |
| 09/30204183 DC : 0 | BS EN 88-1 - PRESSURE REGULATORS AND ASSOCIATED SAFETY DEVICES FOR GAS APPLIANCES - PART 1: PRESSURE REGULATORS FOR INLET PRESSURES UP TO AND INCLUDING 500 MBAR |
| 07/30163045 DC : DRAFT AUG 2007 | BS EN 525 - NON-DOMESTIC DIRECT GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW |
| BS EN 61753-1:2007 | Fibre optic interconnecting devices and passive components performance standard General and guidance for performance standards |
| BS EN 61987-1:2007 | Industrial-process measurement and control. Data structures and elements in process equipment catalogues Measuring equipment with analogue and digital output |
| 03/111581 DC : DRAFT JULY 2003 | BS EN ISO 18778 - INFANT MONITORS - PARTICULAR REQUIREMENTS |
| BS EN 61076-3-117:2009 | Connectors for electronic equipment. Product requirements Rectangular connectors. Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 series interface. Variant 14 related to IEC 61076-3-106. Push-pull coupling |
| EN 12184:2014 | Electrically powered wheelchairs, scooters and their chargers - Requirements and test methods |
| CLC/TS 50131-2-7-2:2009 | Alarm systems - Intrusion and hold-up systems - Part 2-7-2: Intrusion detectors - Glass break detectors (passive) |
| 11/30237926 DC : 0 | BS EN 12184 - ELECTRICALLY POWERED WHEELCHAIRS, SCOOTERS AND THEIR CHARGERS - REQUIREMENTS AND TEST METHODS |
| BS EN 62094-1:2003 | Indicator light units for household and similar fixed-electrical installations General requirements |
| UNE-EN 50545-1:2012 | Electrical apparatus for the detection and measurement of toxic and combustible gases in car parks and tunnels - Part 1: General performance requirements and test methods for the detection and measurement of carbon monoxide and nitrogen oxides |
| DIN EN 12966:2015-03 | ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS |
| 08/30180918 DC : DRAFT JULY 2008 | BS EN 1854 - PRESSURE SENSING DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES |
| UNE-EN 50131-2-7-1:2013 | Alarm systems - Intrusion and hold-up systems - Part 2-7-1: Intrusion detectors - Glass break detectors (acoustic) |
| I.S. EN 16932-1:2018 | DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS - PUMPING SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| BS EN 50262:1999 | Cable glands for electrical installations |
| 11/30252227 DC : 0 | BS EN 16340 - COMBUSTION PRODUCT SENSING DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES |
| I.S. EN 62040-1-1:2004 | |
| PREN 13525 : DRAFT 2016 | FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY |
| BS EN 45510-2-4:2000 | Guide for the procurement of power station equipment Electrical equipment. High power static convertors |
| PREN 1648-1 : DRAFT 2017 | LEISURE ACCOMMODATION VEHICLES - 12 V DIRECT CURRENT EXTRA LOW VOLTAGE ELECTRICAL INSTALLATIONS - PART 1: CARAVANS |
| CEI EN 50172 : 2006 | EMERGENCY ESCAPE LIGHTING SYSTEMS |
| CEI EN 62052-11 : 2003 | ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 11: METERING EQUIPMENT |
| UNI EN 15000 : 2009 | SAFETY OF INDUSTRIAL TRUCKS - SELF PROPELLED VARIABLE REACH TRUCKS - SPECIFICATION, PERFORMANCE AND TEST REQUIREMENTS FOR LONGITUDINAL LOAD MOMENT INDICATORS AND LONGITUDINAL LOAD MOMENT LIMITERS |
| EN 50131-6:2017 | Alarm systems - Intrusion and hold-up systems - Part 6: Power supplies |
| NF EN 15714-2 : 2009 | INDUSTRIAL VALVES - ACTUATORS - PART 2: ELECTRIC ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| NF EN 50015 : 1999 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - OIL IMMERSION 'O' |
| 03/316889 DC : DRAFT OCT 2003 | EN 12098-5 - CONTROLS FOR HEATING SYSTEMS - PART 5: START-STOP SCHEDULERS FOR HEATING SYSTEMS |
| DIN EN 15467:2015-03 | FOOD PROCESSING MACHINERY - FISH HEADING AND FILLETING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| NF EN 62561-6 : 2011 | LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 6: REQUIREMENTS FOR LIGHTNING STRIKE COUNTERS (LSC) |
| I.S. EN 60974-11:2010 | ARC WELDING EQUIPMENT - PART 11: ELECTRODE HOLDERS |
| NF EN 15220-1 : 2009 + A1 2011 | RAILWAY APPLICATIONS - BRAKE INDICATORS - PART 1: PNEUMATICALLY OPERATED BRAKE INDICATORS |
| BS EN 60079-2:2014 | Explosive atmospheres Equipment protection by pressurized enclosure \'p\' |
| 04/30086349 DC : DRAFT APR 2004 | EN ISO 13849-1 - SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN |
| UNI EN 15650 : 2010 | VENTILATION FOR BUILDINGS - FIRE DAMPERS |
| UNI EN 1870-18 : 2014 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 18: DIMENSION SAWS |
| ONORM EN 14504 : 2009 | INLAND NAVIGATION VESSELS - FLOATING LANDING STAGES - REQUIREMENTS, TESTS |
| I.S. EN 60598-2-21:2015 | LUMINAIRES - PART 2-21: PARTICULAR REQUIREMENTS - ROPE LIGHTS |
| I.S. EN 61140:2016 | PROTECTION AGAINST ELECTRIC SHOCK - COMMON ASPECTS FOR INSTALLATION AND EQUIPMENT |
| BS EN 60950-22:2017 | Information technology equipment. Safety Equipment to be installed outdoors |
| EN 50463-3:2017 | Railway applications - Energy measurement on board trains - Part 3: Data handling |
| I.S. EN 50521:2008 | CONNECTORS FOR PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS |
| PREN 50502 : DRAFT 2013 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRIC EQUIPMENT IN TROLLEY BUSES - SAFETY REQUIREMENTS AND CONNECTION SYSTEMS |
| BS EN 60998-2-3:2004 | Connecting devices for low-voltage circuits for household and similar purposes Particular requirements for connecting devices as separate entities with insulation-piercing clamping units |
| UNE-EN 1807-2:2013 | Safety of woodworking machines - Band sawing machines - Part 2: Log sawing machines |
| BS EN 12042:2014 | Food processing machinery. Automatic dough dividers. Safety and hygiene requirements |
| I.S. EN 60968:2015 | SELF-BALLASTED FLUORESCENT LAMPS FOR GENERAL LIGHTING SERVICES - SAFETY REQUIREMENTS |
| UNE-EN 60079-25:2017 | Explosive atmospheres -- Part 25: Intrinsically safe electrical systems |
| CLC/TS 50131-2-8:2012 | Alarm systems - Intrusion and hold-up systems - Part 2-8: Intrusion detectors - Shock detectors |
| DIN EN 16500 E : 2014 | MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS |
| BS EN 60269-1 : 2007 | LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS |
| DIN EN 50021 : 2000 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - TYPE OF PROTECTION "N" |
| BS EN 60204-11 : 2001 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 11: REQUIREMENTS FOR HV EQUIPMENT FOR VOLTAGES ABOVE 1000 V A.C. OR 1500 V D.C. AND NOT EXCEEDING 36 KV |
| 99/715322 DC : DRAFT NOV 99 | PREN 12952-11 - WATER-TUBE BOILERS - PART 11: REQUIREMENTS FOR LIMITING DEVICES AND SAFETY CIRCUITS OF THE BOILER AND ACCESORIES |
| CEI EN 50173-1 : 2011 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| UNI CEI EN 45510-2-7 : 2011 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-7: ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR |
| I.S. EN 60519-2:2006 | SAFETY IN ELECTROHEAT INSTALLATIONS - PART 2: PARTICULAR REQUIREMENTS FOR RESISTANCE HEATING EQUIPMENT |
| BS EN 50177 : 2009 | STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE COATING POWDERS - SAFETY REQUIREMENTS |
| DIN EN 15714-4:2010-02 | Industrial valves - Actuators - Part 4: Hydraulic part-turn actuators for industrial valves - Basic requirements |
| UNI EN 12405-1 : 2010 | GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| I.S. EN 15869-2:2010 | INLAND NAVIGATION VESSELS - ELECTRICAL SHORE CONNECTION, THREE PHASE CURRENT 400 V, UP TO 63 A, 50 HZ - PART 2: ONSHORE UNIT, SAFETY REQUIREMENTS |
| UNE-EN 50110-1:2014 | Operation of electrical installations - Part 1: General requirements |
| CEI EN 50470-1 : 2007 | ELECTRICITY METERING EQUIPMENT (A.C.) - PART 1: GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - METERING EQUIPMENT (CLASS INDEXES A, B AND C) |
| CEI EN 60601-1-1 : 2003 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-1: GENERAL REQUIREMENTS FOR SAFETY - COLLATERAL STANDARD: SAFETY REQUIREMENTS FOR MEDICAL ELECTRICAL SYSTEMS |
| EN 50588-1:2017 | Medium power transformers 50 Hz, with highest voltage for equipment not exceeding 36 kV - Part 1: General requirements |
| CEI EN 60974-5 : 2014 | ARC WELDING EQUIPMENT - PART 5: WIRE FEEDERS |
| CEI EN 50516-3-1 : 2014 | INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: TYPE ODVA APC TERMINATED ON EN 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY 1 (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN EN 50173-1 AND IEC 61753-1-3 |
| UNE-EN 50131-2-8:2017 | Alarm systems - Intrusion and hold-up systems - Part 2-8: Intrusion detectors - Shock detectors |
| I.S. EN 50130-5:2011 | ALARM SYSTEMS - PART 5: ENVIRONMENTAL TEST METHODS |
| ASTM E 2513 : 2007 : R2012 | Standard Specification for Multi-Story Building External Evacuation Platform Rescue Systems |
| UNI CEI EN 12966-1 : 2010 | ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS - PART 1: PRODUCT STANDARD |
| I.S. EN 50411-3-8:2016 | FIBRE ORGANIZERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-8: FIBRE MANAGEMENT SYSTEM, TERMINAL EQUIPMENT BOX TYPE 1 FOR CATEGORY C |
| PREN 15091 : DRAFT 2012 | SANITARY TAPWARE - ELECTRONIC OPENING AND CLOSING SANITARY TAPWARE |
| BS EN 50086-1:1994 | Specification for conduit systems for cable management General requirements |
| I.S. EN 61984:2009 | CONNECTORS - SAFETY REQUIREMENTS AND TESTS |
| I.S. EN 15431:2008 | WINTER AND ROAD SERVICE AREA MAINTENANCE EQUIPMENTS - POWER SYSTEM AND RELATED CONTROLS - INTERCHANGEABILITY AND PERFORMANCE REQUIREMENTS |
| EN 61995-1:2008/A1:2017 | DEVICES FOR THE CONNECTION OF LUMINAIRES FOR HOUSEHOLD AND SIMILAR PURPOSES - PART 1: GENERAL REQUIREMENTS (IEC 61995-1:2005/A1:2016) |
| DIN EN 12098-1:2016-01 (Draft) | ENERGY PERFORMANCE OF BUILDINGS - CONTROLS FOR HEATING SYSTEMS - PART 1: CONTROL EQUIPMENT FOR HOT WATER HEATING SYSTEMS - MODULES M3-5, 6, 7, 8 |
| BS EN 50379-1:2012 | Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances General requirements and test methods |
| I.S. EN 50516-2-1:2011 | INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-1: TYPE ODVA PC INDUSTRIAL TERMINATED ON EN 60793-2-10 CATEGORY A1A AND A1B MULTIMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY I (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN EN 50173-1 AND IEC 61753-1-3 |
| I.S. EN 15654-1:2018 | RAILWAY APPLICATIONS - MEASUREMENT OF VERTICAL FORCES ON WHEELS AND WHEELSETS - PART 1: ON-TRACK MEASUREMENT SITES FOR VEHICLES IN SERVICE |
| I.S. EN 60127-6:2014 | MINIATURE FUSES - PART 6: FUSE-HOLDERS FOR MINIATURE FUSE-LINKS |
| UNE-EN 1672-1:2015 | Food processing machinery - Basic concepts - Part 1: Safety requirements |
| I.S. EN 60335-2-10:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-10: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES AND WET SCRUBBING MACHINES |
| I.S. EN 62864-1:2016 | RAILWAY APPLICATIONS - ROLLING STOCK - POWER SUPPLY WITH ONBOARD ENERGY STORAGE SYSTEM - PART 1: SERIES HYBRID SYSTEM |
| I.S. EN 50249:2002 | ELECTROMAGNETIC LOCATORS FOR BURIED PIPES AND CABLES - PERFORMANCE AND SAFETY |
| I.S. EN 61386-22:2004 | CONDUIT SYSTEMS FOR CABLE MANAGEMENT - PART 22: PARTICULAR REQUIREMENTS - PLIABLE CONDUIT SYSTEMS |
| I.S. EN 60065:2014 | AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS |
| NFC 70 238 : 2001 AMD 1 2006 | ROAD TRAFFIC SIGNAL SYSTEMS |
| I.S. EN 15609:2012 | LPG EQUIPMENT AND ACCESSORIES - LPG PROPULSION SYSTEMS FOR BOATS, YACHTS AND OTHER CRAFT |
| I.S. EN 15061:2007 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT |
| I.S. HD 60364-5-51:2009 | ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 5-51: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - COMMON RULES (IEC 60364-5-51:2005 (MOD)) |
| I.S. EN 16719:2018 | TRANSPORT PLATFORMS |
| I.S. EN 50516-3-1:2014 | INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: TYPE ODVA APC TERMINATED ON EN 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY 1 (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN EN 50173-1 AND IEC 61753-1-3 |
| S.R. CLC/TS 50537-1:2010 | RAILWAY APPLICATIONS - MOUNTED PARTS OF THE TRACTION TRANSFORMER AND COOLING SYSTEM - PART 1: HV BUSHING FOR TRACTION TRANSFORMERS |
| BS EN 50470-1 : 2006 | ELECTRICITY METERING EQUIPMENT (A.C.) - PART 1: GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - METERING EQUIPMENT (CLASS INDEXES A, B AND C) |
| BS EN 62271-100 : 2009 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 100: ALTERNATING-CURRENT CIRCUIT-BREAKERS (IEC 62271-100:2008) |
| I.S. EN 50617-2:2015 | RAILWAY APPLICATIONS - TECHNICAL PARAMETERS OF TRAIN DETECTION SYSTEMS FOR THE INTEROPERABILITY OF THE TRANS-EUROPEAN RAILWAY SYSTEM - PART 2: AXLE COUNTERS |
| I.S. EN 15500-1:2017 | ENERGY PERFORMANCE OF BUILDINGS - CONTROL FOR HEATING, VENTILATING AND AIR CONDITIONING APPLICATIONS - PART 1: ELECTRONIC INDIVIDUAL ZONE CONTROL EQUIPMENT - MODULES M3-5, M4-5, M5-5 |
| I.S. EN 61184:2017 | BAYONET LAMPHOLDERS |
| I.S. EN 15572:2015 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES |
| I.S. EN 50381:2004 | TRANSPORTABLE VENTILATED ROOMS WITH OR WITHOUT AN INTERNAL SOURCE OF RELEASE |
| CEI EN 50463-2 : 2013 | RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 2: ENERGY MEASURING |
| I.S. EN 50463-3:2017 | RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 3: DATA HANDLING |
| I.S. EN 50299-2:2014 | OIL-IMMERSED CABLE CONNECTION ASSEMBLIES FOR TRANSFORMERS AND REACTORS HAVING HIGHEST VOLTAGE FOR EQUIPMENT UM FROM 72,5 KV TO 550 KV - PART 2: DRY-TYPE CABLE TERMINATIONS |
| EN 50174-3:2013/A1:2017 | INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS |
| I.S. EN 1870-6:2017 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 6: CIRCULAR SAWING MACHINES FOR FIRE WOOD |
| PREN 15467 : DRAFT 2012 | FOOD PROCESSING MACHINERY - FISH HEADING AND FILLETING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| CEI EN 50136-2 : 2014 | ALARM SYSTEMS - ALARM TRANSMISSION SYSTEMS AND EQUIPMENT - PART 2: REQUIREMENTS FOR SUPERVISED PREMISES TRANSCEIVER (SPT) |
| I.S. EN 15869-3:2010 | INLAND NAVIGATION VESSELS - ELECTRICAL SHORE CONNECTION, THREE PHASE CURRENT 400 V, UP TO 63 A, 50 HZ - PART 3: ON-BOARD UNIT, SAFETY REQUIREMENTS |
| EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
| PREN 13378 : DRAFT 2016 | PASTA PROCESSING PLANTS - PASTA PRESSES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 1648-1:2018 | LEISURE ACCOMMODATION VEHICLES - 12 V DIRECT CURRENT EXTRA LOW VOLTAGE ELECTRICAL INSTALLATIONS - PART 1: CARAVANS |
| S.R. CEN/TR 16251:2016 | RAILWAY APPLICATIONS - ENVIRONMENTAL CONDITIONS - DESIGN GUIDANCE FOR ROLLING STOCK |
| BS EN 60670-1 : 2005 | BOXES AND ENCLOSURES FOR ELECTRICAL ACCESSORIES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 15094:2008 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR COLD FLAT ROLLING MILLS |
| I.S. EN 15467:2014 | FOOD PROCESSING MACHINERY - FISH HEADING AND FILLETING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 62870:2015 | ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - SAFETY SECONDARY CIRCUITS IN SERIES CIRCUITS - GENERAL SAFETY REQUIREMENTS |
| I.S. EN 50216-1:2002 | POWER TRANSFORMER AND REACTOR FITTINGS - PART 1: GENERAL |
| I.S. EN 62368-1:2014 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS (IEC 62368-1:2014, MODIFIED) |
| I.S. EN 62282-3-100:2012 | FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-3-100:2012 (EQV)) |
| I.S. EN 60335-2-38:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-38: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC GRIDDLES AND GRIDDLE GRILLS |
| I.S. EN 16191:2014 | TUNNELLING MACHINERY - SAFETY REQUIREMENTS |
| I.S. EN 62310-3:2008 | STATIC TRANSFER SYSTEMS (STS) - PART 3: METHOD FOR SPECIFYING PERFORMANCE AND TEST REQUIREMENTS |
| I.S. EN 60092-507:2015 | ELECTRICAL INSTALLATIONS IN SHIPS - PART 507: SMALL VESSELS |
| I.S. EN 474-1:2006 | EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 50125-2:2003 | RAILWAY APPLICATIONS - ENVIRONMENTAL CONDITIONS FOR EQUIPMENT - PART 2: FIXED ELECTRICAL INSTALLATIONS |
| S.R. CWA 16688:2013 | BATTERY SWAP SYSTEMS INTERFACES FOR ELECTRIC VEHICLES |
| S.R. CLC/TS 50467:2008 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS |
| DIN EN 12261:2007-07 | GAS METERS - TURBINE GAS METERS |
| I.S. EN 61076-2-104:2014 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-104: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CIRCULAR CONNECTORS WITH M8 SCREW-LOCKING OR SNAP-LOCKING |
| I.S. EN 15954-2:2013 | RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| I.S. EN IEC 61076-2-111:2018 | CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-111: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR POWER CONNECTORS WITH M12 SCREW-LOCKING |
| I.S. EN 60335-2-12:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-12: PARTICULAR REQUIREMENTS FOR WARMING PLATES AND SIMILAR APPLIANCES |
| PREN 14972-1 : DRAFT 2017 | FIXED FIREFIGHTING SYSTEMS - WATER MIST SYSTEMS - PART 1: DESIGN, INSTALLATION, INSPECTION AND MAINTENANCE |
| I.S. EN 50588-3:2018 | MEDIUM POWER TRANSFORMERS 50 HZ, WITH HIGHEST VOLTAGE FOR EQUIPMENT NOT EXCEEDING 36 KV - PART 3: TRANSFORMERS WITH CABLE BOXES ON THE HIGH-VOLTAGE AND/OR LOW-VOLTAGE SIDE - CABLE BOXES TYPE 1 FOR USE ON TRANSFORMERS MEETING THE REQUIREMENTS OF EN 50588-2 |
| I.S. EN 62093:2005 | BALANCE-OF-SYSTEM COMPONENTS FOR PHOTOVOLTAIC SYSTEMS - DESIGN QUALIFICATION NATURAL ENVIRONMENTS |
| I.S. CLC TS 50131-4:2006 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 4: WARNING DEVICES |
| PREN 17067 : DRAFT 2016 | FORESTRY MACHINERY - SAFETY REQUIREMENTS ON RADIO REMOTE CONTROLS |
| I.S. EN 15597-1:2009 | WINTER MAINTENANCE EQUIPMENT - SPREADING MACHINES (GRITTING MACHINES) - PART 1: GENERAL REQUIREMENTS AND DEFINITIONS FOR SPREADING MACHINES |
| S.R. CEN TR 16040:2010 | PERCEPTION DE TELEPEAGE - EXIGENCES POUR L'USAGE DU DSRC EN URBAIN |
| UNE-EN 50379-2:2013 | Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances - Part 2: Performance requirements for apparatus used in statutory inspections and assessment |
| 17/30325894 DC : 0 | BS EN 17075 - WATER QUALITY - GENERAL REQUIREMENTS AND PERFORMANCE TEST PROCEDURES FOR WATER MONITORING EQUIPMENT - MEASURING DEVICES |
| CEI EN 61000-5-7 : 2003 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 5-7: INSTALLATION AND MITIGATION GUIDELINES - DEGREES OF PROTECTION BY ENCLOSURES AGAINST ELECTROMAGNETIC DISTURBANCES (EM CODE) |
| DD ENV 14236:2002 | Ultrasonic domestic gas meters |
| I.S. EN 50131-2-7-3:2012/A2:2016 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-3: INTRUSION DETECTORS - GLASS BREAK DETECTORS (ACTIVE) |
| PREN 54-4 : DRAFT 2015 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 4: POWER SUPPLY EQUIPMENT |
| I.S. EN 50123-2:2003 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SWITCHGEAR - D.C. CIRCUIT BREAKERS |
| PREN 50628 : DRAFT 2014 | ERECTION OF ELECTRICAL INSTALLATIONS IN UNDERGROUND MINES |
| PREN 12050-1 : DRAFT 2012 | WASTEWATER LIFTING PLANTS FOR BUILDINGS AND SITES - PART 1: LIFTING PLANTS FOR WASTEWATER CONTAINING FAECAL MATTER |
| CEI UNI EN 12414 : 2001 | VEHICLE PARKING CONTROL EQUIPMENT - PAY AND DISPLAY TICKET MACHINE - TECHNICAL AND FUNCTIONAL REQUIREMENTS |
| CEI EN 62310-1 : 2006 | STATIC TRANSFER SYSTEMS (STS) - PART 1: GENERAL AND SAFETY REQUIREMENTS |
| EN 12012-1:2007+A1:2008 | Plastics and rubber machines - Size reduction machines - Part 1: Safety requirements for blade granulators |
| PREN 12547 : DRAFT 2011 | CENTRIFUGES - COMMON SAFETY REQUIREMENTS |
| PREN 45545-4 : DRAFT 2010 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 4: FIRE SAFETY REQUIREMENTS FOR ROLLING STOCK DESIGN |
| CEI EN 50291-2 : 2011 | ELECTRICAL APPARATUS FOR THE DETECTION OF CARBON MONOXIDE IN DOMESTIC PREMISES - PART 2: ELECTRICAL APPARATUS FOR CONTINUOUS OPERATION IN A FIXED INSTALLATION IN RECREATIONAL VEHICLES AND SIMILAR PREMISES INCLUDING RECREATIONAL CRAFT - ADDITIONAL TEST METHODS AND PERFORMANCE REQUIREMENTS |
| CEI EN 60255-27 : 2014 | MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 27: PRODUCT SAFETY REQUIREMENTS |
| BS EN 50050:2006 | Electrical apparatus for potentially explosive atmospheres. Electrostatic hand-held spraying equipment |
| 16/30312379 DC : 0 | BS EN 54-2 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 2: CONTROL AND INDICATING EQUIPMENT |
| I.S. EN 54-3:2014 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 3: FIRE ALARM DEVICES - SOUNDERS |
| 14/30301874 DC : 0 | BS EN 16770 - SAFETY OF WOODWORKING MACHINES - CHIP AND DUST EXTRACTION SYSTEMS FOR INDOOR INSTALLATION - SAFETY REQUIREMENTS |
| UNE-EN 13611:2016 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements |
| 17/30362673 DC : 0 | BS EN 12978 - INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY DEVICES FOR POWER OPERATED DOORS AND GATES - REQUIREMENTS AND TEST METHODS |
| UNI EN 15595 : 2011 | RAILWAY APPLICATIONS - BRAKING - WHEEL SLIDE PROTECTION |
| 16/30335146 DC : 0 | BS EN 16985 - SPRAY BOOTHS FOR ORGANIC COATING MATERIAL - SAFETY REQUIREMENTS |
| BS EN 12013:2018 | Plastics and rubber machines. Internal mixers. Safety requirements |
| 15/30270320 DC : 0 | BS EN 15595 - RAILWAY APPLICATIONS - BRAKING - WHEEL SLIDE PROTECTION |
| DIN EN 13611:2016-09 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| EN 62368-1:2014/AC:2017-03 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS (IEC 62368-1:2014, MODIFIED) |
| 17/30363959 DC : 0 | BS EN 17175 - GAS-FIRED OVERHEAD RADIANT STRIP HEATERS AND MULTI-BURNER CONTINUOUS RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY |
| EN 15163:2017 | Machines and installations for the exploitation and processing of natural stone - Safety - Requirements for diamond wire saws |
| BWB TL 3419-0013 : 1ED 2004 | |
| I.S. EN 61753-1-3:2014 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 1-3: GENERAL AND GUIDANCE FOR SINGLE-MODE FIBRE OPTIC CONNECTOR AND CABLE ASSEMBLY FOR INDUSTRIAL ENVIRONMENT, CATEGORY 1 |
| EN 14504:2016 | Inland navigation vessels - Floating landing stages and floating equipment on inland waters - Requirements, tests |
| 17/30341744 DC : 0 | BS EN 17110 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - VAPOUR MANIFOLD VENT VALVE |
| BS EN 50291-2:2010 | Electrical apparatus for the detection of carbon monoxide in domestic premises Electrical apparatus for continuous operation in a fixed installation in recreational vehicles and similar premises including recreational craft. Additional test methods and performance requirements |
| 15/30290856 DC : 0 | BS EN 54-4 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 4 : POWER SUPPLY EQUIPMENT |
| I.S. EN 61243-3:2014 | LIVE WORKING - VOLTAGE DETECTORS - PART 3: TWO-POLE LOW-VOLTAGE TYPE |
| I.S. EN 54-24:2008 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 24: COMPONENTS OF VOICE ALARM SYSTEMS - LOUDSPEAKERS |
| EN IEC 62828-1:2018 | Reference conditions and procedures for testing industrial and process measurement transmitters - Part 1: General procedures for all types of transmitters |
| I.S. EN 60204-33:2011 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 33: REQUIREMENTS FOR SEMICONDUCTOR FABRICATION EQUIPMENT |
| DIN EN 81-80:2004-02 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - EXISTING LIFTS - PART 80: RULES FOR THE IMPROVEMENT OF SAFETY OF EXISTING PASSENGER AND GOODS PASSENGER LIFTS |
| 17/30364338 DC : 0 | BS EN 1009-1 - MACHINES FOR MECHANICAL PROCESSING OF MINERALS AND SIMILAR SOLID MATERIALS - SAFETY - PART 1: COMMON REQUIREMENTS FOR PARTLY COMPLETED MACHINERY AND PROCESSING PLANTS |
| UNI EN 1648-1 : 2012 | LEISURE ACCOMMODATION VEHICLES - 12 V DIRECT CURRENT EXTRA LOW VOLTAGE ELECTRICAL INSTALLATIONS - PART 1: CARAVANS |
| DIN EN 50272-2 : 2001 | SAFETY REQUIREMENTS FOR SECONDARY BATTERIES AND BATTERY INSTALLATIONS - PART 2: STATIONARY BATTERIES |
| PREN 13611 : DRAFT 2017 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| DIN EN 81-71:2015-10 (Draft) | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PARTICULAR APPLICATIONS FOR PASSENGER LIFTS AND GOODS PASSENGER LIFTS - PART 71: VANDAL RESISTANT LIFTS |
| CEI EN 60146-1-1 : 2013 | SEMICONDUCTOR CONVERTERS - GENERAL REQUIREMENTS AND LINE COMMUTATED CONVERTERS - PART 1-1: SPECIFICATION OF BASIC REQUIREMENTS |
| UNE-EN 12966:2015 | Road vertical signs - Variable message traffic signs |
| CEI EN 60255-1 : 2011 | MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 1: COMMON REQUIREMENTS |
| CEI 13-26 : 1999 | WATT-HOUR METERS AND POWER LIMITERS FOR LOW-VOLTAGE NETWORKS (INTEGRATED UNITS) PERMITTED OR NOT FOR PROCESSING AND REMOTE MANAGEMENT OF DATA |
| GOST EN 1760-1 : 2004 | SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 1 - GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE MATS AND PRESSURE SENSITIVE FLOORS |
| CEI EN 61557-12 : 2013 | ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 12: PERFORMANCE MEASURING AND MONITORING DEVICES (PMD) |
| NFC 61 460 : 2002 AMD 2 2011 | ELECTRICAL ACCESSORIES - PORTABLE RESIDUAL CURRENT DEVICES WITHOUT INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USE (PRCDS) |
| UNE-EN 62864-1:2017 | Railway applications - Rolling stock - Power supply with onboard energy storage system - Part 1: Series hybrid system |
| UNE-EN 13060:2015 | Small steam sterilizers |
| CEI EN 50556 : 2012 | ROAD TRAFFIC SIGNAL SYSTEMS |
| PREN 16282-8 : DRAFT 2014 | EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION - PART 8: INSTALLATIONS FOR TREATMENT OF COOKING FUMES; REQUIREMENTS AND TESTING |
| I.S. EN 50379-2:2012 | SPECIFICATION FOR PORTABLE ELECTRICAL APPARATUS DESIGNED TO MEASURE COMBUSTION FLUE GAS PARAMETERS OF HEATING APPLIANCES - PART 2: PERFORMANCE REQUIREMENTS FOR APPARATUS USED IN STATUTORY INSPECTIONS AND ASSESSMENT |
| PREN 454 : DRAFT 2011 | FOOD PROCESSING MACHINERY - PLANETARY MIXERS - SAFETY AND HYGIENE REQUIREMENTS |
| PREN 12042 : DRAFT 2011 | FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS |
| PREN 13216-1 : DRAFT 2016 | CHIMNEYS - TEST METHODS FOR SYSTEM CHIMNEYS - PART 1: GENERAL TEST METHODS |
| CEI UNI EN 45510-2-3 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-3: ELECTRICAL EQUIPMENT - STATIONARY BATTERIES AND CHARGERS |
| CEI 214-3/1 : 1999 | TAXI FLEET MANAGEMENT - GENERAL REFERENCE |
| UNE-EN 50050-1:2014 | Electrostatic hand-held spraying equipment - Safety requirements - Part 1: Hand-held spraying equipment for ignitable liquid coating materials |
| EN 50524:2009 | Data sheet and name plate for photovoltaic inverters |
| DIN EN 12753:2011-02 | Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety requirements (includes Amendment A1:2010) |
| EN 16839:2017 | Railway applications - Rolling stock - Head stock layout |
| I.S. EN 50125-1:2014 | RAILWAY APPLICATIONS - ENVIRONMENTAL CONDITIONS FOR EQUIPMENT - PART 1: ROLLING STOCK AND ON-BOARD EQUIPMENT |
| ASTM E 2513 : 2007 | Standard Specification for Multi-Story Building External Evacuation Platform Rescue Systems |
| UNE-EN 60598-1:2015 | Luminaires - Part 1: General requirements and tests |
| I.S. EN 61643-21:2001 | LOW VOLTAGE SURGE PROTECTIVE DEVICES - PART 21: SURGE PROTECTIVE DEVICES CONNECTED TO TELECOMMUNICATIONS AND SIGNALLING NETWORKS - PERFORMANCE REQUIREMENTS AND TESTING METHODS (IEC 61643-21:2000 (EQV) + CORRIGENDUM MAR. 2001 (EQV)) |
| ISO/TR 14799-2:2015 | Comparison of worldwide escalator and moving walk safety standards — Part 2: Abbreviated comparison and comments |
| EN 12098-5:2017 | Energy Performance of Buildings - Controls for heating systems - Part 5: Start-stop schedulers for heating systems - Modules M3-5,6,7,8 |
| BS EN ISO 11197:2009 | Medical supply units |
| EN 62026-2:2013 | Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 2: Actuator sensor interface (AS-i) |
| I.S. EN 13216-1:2004 | CHIMNEYS - TEST METHODS FOR SYSTEM CHIMNEYS - PART 1: GENERAL TEST METHODS |
| I.S. EN 12693:2008 | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS |
| I.S. EN 61800-4:2003 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 4: GENERAL REQUIREMENTS - RATING SPECIFICATIONS FOR A.C. POWER DRIVE SYSTEMS ABOVE 1000 V A.C. AND NOT EXCEEDING 35 KV |
| EN 12830:1999 | Temperature recorders for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream - Tests, performance, suitability |
| DIN EN 12757-1:2011-02 | Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing (includes Amendment A1:2010) |
| EN 12480:2018 | Gas meters - Rotary displacement gas meters |
| I.S. EN 50369:2005 | LIQUID TIGHT SHEATHING SYSTEMS FOR CABLE MANAGEMENT |
| EN 1459-2:2015 | Rough-terrain trucks - Safety requirements and verification - Part 2: Slewing variable-reach trucks |
| EN 12405-1:2005+A2:2010 | Gas meters - Conversion devices - Part 1: Volume conversion |
| I.S. EN 61386-21:2004 | CONDUIT SYSTEMS FOR CABLE MANAGEMENT - PART 21: PARTICULAR REQUIREMENTS - RIGID CONDUIT SYSTEMS |
| I.S. EN 60745-1:2009 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 60335-2-45:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-45: PARTICULAR REQUIREMENTS FOR PORTABLE HEATING TOOLS AND SIMILAR APPLIANCES (IEC 60335-2-45:2002 (EQV)) |
| I.S. EN 60335-2-84:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-84: PARTICULAR REQUIREMENTS FOR TOILETS |
| I.S. EN 62135-1:2015 | RESISTANCE WELDING EQUIPMENT - PART 1: SAFETY REQUIREMENTS FOR DESIGN, MANUFACTURE AND INSTALLATION |
| I.S. EN 50343:2014 | RAILWAY APPLICATIONS - ROLLING STOCK - RULES FOR INSTALLATION OF CABLING |
| I.S. EN 60335-2-41:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-41: PARTICULAR REQUIREMENTS FOR PUMPS |
| I.S. CEN TR 12101-4:2006 | SMOKE AND HEAT CONTROL SYSTEMS - PART 4: INSTALLED SHEVS SYSTEMS FOR SMOKE AND HEAT VENTILATION |
| I.S. EN 60838-1:2017 | MISCELLANEOUS LAMPHOLDERS - PART 1: GENERAL REQUIREMENTS AND TESTS |
| I.S. EN 60730-1:2016 | AUTOMATIC ELECTRICAL CONTROLS - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 62208:2011 | EMPTY ENCLOSURES FOR LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - GENERAL REQUIREMENTS (IEC 62208:2011) |
| I.S. EN 54-16:2008 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 16: VOICE ALARM CONTROL AND INDICATING EQUIPMENT |
| I.S. EN 50172:2004 | EMERGENCY ESCAPE LIGHTING SYSTEMS |
| I.S. EN 61020-1:2009 | ELECTROMECHANICAL SWITCHES FOR USE IN ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION |
| I.S. EN 61241-0:2006 | ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 0: GENERAL REQUIREMENTS |
| I.S. EN 50123-7-3:2003 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SWITCHGEAR - PART 7-3: MEASUREMENT, CONTROL AND PROTECTION DEVICES FOR SPECIFIC USE IN D.C. TRACTION SYSTEMS - ISOLATING VOLTAGE TRANSDUCERS AND OTHER VOLTAGE MEASURING DEVICES |
| I.S. EN 61131-2:2007 | PROGRAMMABLE CONTROLLERS - PART 2: EQUIPMENT REQUIREMENTS AND TESTS |
| I.S. EN 50016:2002 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - PRESSURIZED APPARATUS "P" |
| I.S. EN 61822:2009 | ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - CONSTANT CURRENT REGULATORS |
| BS EN 12301 : 2000 | PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS |
| NF EN 1974 : 1998 + A1 2009 | FOOD PROCESSING MACHINERY - SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 50131-2-5:2008 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-5: REQUIREMENTS FOR COMBINED PASSIVE INFRARED AND ULTRASONIC DETECTORS |
| I.S. EN 50194-1:2009 | ELECTRICAL APPARATUS FOR THE DETECTION OF COMBUSTIBLE GASES IN DOMESTIC PREMISES - PART 1: TEST METHODS AND PERFORMANCE REQUIREMENTS |
| I.S. EN 50379-3:2012 | SPECIFICATION FOR PORTABLE ELECTRICAL APPARATUS DESIGNED TO MEASURE COMBUSTION FLUE GAS PARAMETERS OF HEATING APPLIANCES - PART 3: PERFORMANCE REQUIREMENTS FOR APPARATUS USED IN NON-STATUTORY SERVICING OF GAS FIRED HEATING APPLIANCES |
| I.S. EN 60601-2-38:1998 | MEDICAL ELECTRICAL EQUIPMENT - PART 2: PARTICULAR REQUIREMENTS FOR THE SAFETY OF ELECTRICALLY OPERATED HOSPITAL BEDS |
| EN 60335-2-47:2003/A11:2012 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-47: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC BOILING PANS (IEC 60335-2-47:2002) |
| I.S. EN 61558-1:2006 | SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS |
| I.S. EN 81-80:2004 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - EXISTING LIFTS - RULES FOR THE IMPROVEMENT OF SAFETY OF EXISTING PASSENGER AND GOODS PASSENGER LIFTS |
| I.S. EN 12480:2018 | GAS METERS - ROTARY DISPLACEMENT GAS METERS |
| I.S. EN 15166:2008 | FOOD PROCESSING MACHINERY - AUTOMATIC BACK SPLITTING MACHINES OF BUTCHERY CARCASSES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 13976-2:2011 | RESCUE SYSTEMS - TRANSPORTATION OF INCUBATORS - PART 2: SYSTEM REQUIREMENTS |
| EN 50325-1:2002 | Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces - Part 1: General requirements |
| I.S. EN 60077-3:2002 | RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 3: ELECTROTECHNICAL COMPONENTS - RULES FOR D.C. CIRCUIT-BREAKERS |
| UNE-EN 280:2014 | Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests |
| NF EN 13525 : 2005 + A2 2009 | FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY |
| I.S. EN 50379-1:2012 | SPECIFICATION FOR PORTABLE ELECTRICAL APPARATUS DESIGNED TO MEASURE COMBUSTION FLUE GAS PARAMETERS OF HEATING APPLIANCES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
| I.S. EN 12301:2000 | PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS |
| EN 50153 : 2014 AMD 1 2017 | RAILWAY APPLICATIONS - ROLLING STOCK - PROTECTIVE PROVISIONS RELATING TO ELECTRICAL HAZARDS |
| EN 60335-2-59:2003/A2:2009 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-59: PARTICULAR REQUIREMENTS FOR INSECT KILLERS |
| EN 60335-2-82:2003/A1:2008 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-82: PARTICULAR REQUIREMENTS FOR AMUSEMENT MACHINES AND PERSONAL SERVICE MACHINES |
| I.S. EN 267:2009 | AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS |
| UNE-EN 1915-1:2013 | Aircraft ground support equipment - General requirements - Part 1: Basic safety requirements |
| BS EN 267 : 2009 | AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS |
| DIN EN 1710:2008-08 | EQUIPMENT AND COMPONENTS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES |
| DIN EN 764-7:2002-09 | PRESSURE EQUIPMENT - PART 7: SAFETY SYSTEMS FOR UNFIRED PRESSURE EQUIPMENT |
| DIN EN 809:2012-10 | Pumps and pump units for liquids - Common safety requirements |
| DIN EN 81-22:2014-12 | Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 22: Electric lifts with inclined path |
| EN 620:2002+A1:2010 | Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials |
| DIN EN 940:2012-05 | SAFETY OF WOODWORKING MACHINES - COMBINED WOODWORKING MACHINES |
| DIN EN 525:2009-11 | NON-DOMESTIC DIRECT GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW |
| DIN EN 778:2010-03 | DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 70 KW, WITHOUT A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR AND/OR COMBUSTION PRODUCTS |
| DIN EN 61158-2:2015-02 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 2: PHYSICAL LAYER SPECIFICATION AND SERVICE DEFINITION (IEC 61158-2:2014) |
| DIN EN 13732:2013-10 | Food processing machinery - Bulk milk coolers on farms - Requirements for performance, safety and hygiene |
| DIN EN 12416-1:2007-09 | FIXED FIREFIGHTING SYSTEMS - POWDER SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS |
| DIN EN 415-3:2010-07 | Safety of packaging machines - Part 3: Form, fill and seal machines (includes Amendment A1:2009) |
| DIN EN 861:2012-09 | SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES |
| DIN EN 12050-2:2015-05 | WASTEWATER LIFTING PLANTS FOR BUILDINGS AND SITES - PART 2: LIFTING PLANTS FOR FAECAL-FREE WASTEWATER |
| DIN EN 12201-3:2013-01 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 3: FITTINGS |
| DIN EN 201:2010-02 | PLASTICS AND RUBBER MACHINES - INJECTION MOULDING MACHINES - SAFETY REQUIREMENTS |
| DIN EN 972:2011-07 | Tannery machines - Reciprocating roller machines - Safety requirements (includes Amendment A1:2010) |
| DIN EN ISO 16484-2:2016-08 (Draft) | BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 2: HARDWARE |
| DIN EN 859:2012-09 | SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANING MACHINES |
| DIN EN 618:2011-06 | Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors |
| DIN EN 88-1:2016-06 | Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 50 kPa (includes Amendment A1:2016) |
| DIN EN 13886:2011-02 | Food processing machinery - Cooking kettles equipped with powered stirrer and/or mixer - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN 617:2011-06 | Continuous handling equipment and systems - Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers (includes Amendment A1:2010) |
| DIN EN 1114-1:2012-01 | Plastics and rubber machines - Extruders and extrusion lines - Part 1: Safety requirements for extruders |
| DIN EN 12101-10:2006-01 | Smoke and heat control systems - Part 10: Power supplies |
| DIN EN 1870-1:2009-08 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS |
| DIN EN 14044:2014-04 | HIGH RISE AERIAL APPLIANCES FOR FIRE AND RESCUE SERVICE USE - TURNTABLE LADDERS WITH SEQUENTIAL MOVEMENTS - SAFETY AND PERFORMANCE REQUIREMENTS AND TEST METHODS |
| DIN EN 1114-3:2015-12 (Draft) | PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS |
| DIN EN 14043:2014-04 | HIGH RISE AERIAL APPLIANCES FOR FIRE AND RESCUE SERVICE USE - TURNTABLE LADDERS WITH COMBINED MOVEMENTS - SAFETY AND PERFORMANCE REQUIREMENTS AND TEST METHODS |
| DIN EN 12629-7:2011-03 | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 7: Stationary and mobile equipment for long line manufacture of prestressed products (includes Amendment A1:2010) |
| UNE-EN 50491-2:2011 | General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) -- Part 2: Environmental conditions |
| BS EN 50628:2016 | Erection of electrical installations in underground mines |
| BS EN 13463-5:2011 | Non-electrical equipment intended for use in potentially explosive atmospheres Protection by constructional safety \'c\' |
| BS EN 415-5 : 2006 | SAFETY OF PACKAGING MACHINES - PART 5: WRAPPING MACHINES |
| BS EN 764-7:2002 | Pressure equipment Safety systems for unfired pressure vessels |
| BS EN 62271-212:2017 | High-voltage switchgear and controlgear Compact Equipment Assembly for Distribution Substation (CEADS) |
| BS EN 12050-1:2015 | Wastewater lifting plants for buildings and sites Lifting plants for wastewater containing faecal matter |
| BS EN 15869-2:2010 | Inland navigation vessels. Electrical shore connection, three phase current 400 V, up to 63 A, 50 Hz Onshore unit, safety requirements |
| BS EN 12547:2014 | Centrifuges. Common safety requirements |
| BS EN 621:2009 | Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, without a fan to assist transportation of combustion air and/or combustion products |
| UNE-HD 62640:2016 | Residual current devices with or without overcurrent protection for socket-outlets for household and similar uses |
| BS EN 12101-10:2005 | Smoke and heat control systems Power supplies |
| BS EN 12669:2000 | Direct gas-fired hot air blowers for use in greenhouses and supplementary non-domestic space heating |
| BS EN 12178:2003 | Refrigerating systems and heat pumps. Liquid level indicating devices. Requirements, testing and marking |
| BS EN 13885 : 2005 | FOOD PROCESSING MACHINERY - CLIPPING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| UNE-EN 14655:2006 | Food processing machinery - Baguette slicers - Safety and hygiene requirements |
| BS EN 60601-1 : 2006 | MEDICAL ELECTRICAL EQUIPMENT PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE |
| BS EN 1870-12:2013 | Safety of woodworking machines. Circular sawing machines Pendulum cross-cut sawing machines |
| BS EN 1612-2 : 2000 | PLASTICS AND RUBBER MACHINES - REACTION MOULDING MACHINES - PART 2: SAFETY REQUIREMENTS FOR REACTION MOULDING PLANT |
| BS EN 14394 : 2005 | HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C |
| BS EN 1028-1 : 2002 | FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITH PRIMER - PART 1: CLASSIFICATION - GENERAL AND SAFETY REQUIREMENTS |
| 14/30302919 DC : 0 | PD CEN/TR 81-12 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - BASICS AND INTERPRETATIONS - PART 12: USE OF EN 81-20 AND EN 81-50 IN SPECIFIC MARKETS |
| BS EN 453:2014 | Food processing machinery. Dough mixers. Safety and hygiene requirements |
| BS EN 54-23:2010 | Fire detection and fire alarm systems Fire alarm devices. Visual alarm devices |
| BS EN 13675 : 2004 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR TUBE FORMING AND ROLLING MILLS AND THEIR FINISHING LINE EQUIPMENT |
| UNE-EN 12621:2006 | Machinery for the supply and circulation of coating materials under pressure - Safety requirements |
| BS EN 13763-25:2004 | Explosives for civil uses. Detonators and relays Determination of transfer capability of surface connectors, relay and coupling accessories |
| BS EN 61158-2:2014 | Industrial communication networks. Fieldbus specifications Physical layer specification and service definition |
| 97/204928 DC : DRAFT APR 1997 | PREN 50273 - INSTALLATION OF ELECTRICAL APPARATUS IN AREAS ENDANGERED BY EXPLOSIVE SUBSTANCES |
| BS EN 1114-1:2011 | Plastics and rubber machines. Extruders and extrusion lines Safety requirements for extruders |
| 95/214868 DC : 0 | PREN 50178 - ELECTRONIC EQUIPMENT FOR USE IN POWER INSTALLATIONS |
| BS EN 14268:2005 | Irrigation techniques. Meters for irrigation water |
| UNE-EN 62109-1:2011 | Safety of power converters for use in photovoltaic power systems -- Part 1: General requirements |
| BS EN 1010-1 : 2004 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS |
| BS EN 848-1 : 2007 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 1: SINGLE SPINDLE VERTICAL MOULDING MACHINES |
| UNE-EN 50522:2012 | Earthing of power installations exceeding 1 kV a.c. |
| BS EN 61918:2013 | Industrial communication networks. Installation of communication networks in industrial premises |
| BS EN 15270:2007 | Pellet burners for small heating boilers. Definitions, requirements, testing, marking |
| BS EN 1218-3 : 2001 | SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 3: HAND FED TENONING MACHINES WITH SLIDING TABLE FOR CUTTING STRUCTURAL TIMBERS |
| BS EN 13871:2014 | Food processing machinery. Cubes cutting machinery. Safety and hygiene requirements |
| UNE-EN 12601:2011 | Reciprocating internal combustion engine driven generating sets - Safety |
| BS EN 12267 : 2003 | FOOD PROCESSING MACHINERY - CIRCULAR SAW MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 13621 : 2004 | FOOD PROCESSING MACHINERY - SALAD DRYERS - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 12268:2014 | Food processing machinery. Band saw machines. Safety and hygiene requirements |
| BS EN 1889-2 : 2003 | MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 2: RAIL LOCOMOTIVES |
| BS EN 777-2:2009 | Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use System E. Safety |
| BS EN 12352:2006 | Traffic control equipment. Warning and safety light devices |
| BS EN 656:2000 | Gas-fired central heating boilers. Type B boilers of nominal heat input exceeding 70 kW, but not exceeding 300 kW |
| BS EN 12840:2001 | Safety of machine tools. Manually controlled turning machines with or without automatic control |
| BS EN 12417 : 2001 | MACHINE TOOLS - SAFETY - MACHINING CENTRES |
| BS EN 815 : 1997 | SAFETY OF UNSHIELDED TUNNEL BORING MACHINES AND RODLESS SHAFT BORING MACHINES FOR ROCK - SAFETY REQUIREMENTS |
| BS EN 12158-2 : 2000 | BUILDERS' HOISTS FOR GOODS - PART 2: INCLINED HOISTS WITH NON-ACCESSIBLE LOAD CARRYING DEVICES |
| BS EN 1870-1 : 2007 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS |
| BS EN 12263:1999 | Refrigerating systems and heat pumps. Safety switching devices for limiting the pressure. Requirements and tests |
| UNE-CLC/TS 61643-12:2012 | Low-voltage surge protective devices -- Part 12: Surge protective devices connected to low-voltage power distribution systems - Selection and application principles |
| BS EN 12463:2014 | Food processing machinery. Filling machines and auxiliary machines. Safety and hygiene requirements |
| BS EN 61851-1:2011 | Electric vehicle conductive charging system General requirements |
| BS EN 619 : 2002 | |
| BS EN 62282-4-101:2014 | Fuel cell technologies Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU). Safety of electrically powered industrial trucks |
| BS EN 837-3:1998 | Pressure gauges Diaphragm and capsule pressure gauges. Dimensions, metrology, requirements and testing |
| I.S. EN 50119:2020 | Railway applications - Fixed installations - Electric traction overhead contact lines |
| BS EN 12325-1:1999 | Irrigation techniques. Centre pivot and moving lateral systems Presentation of the technical characteristics |
| BS EN 1987-1:1997 | Electrically propelled road vehicles. Specific requirements for safety On board energy storage |
| BS EN 14236:2007 | Ultrasonic domestic gas meters |
| BS EN 13736 : 2003 | SAFETY OF MACHINE TOOLS - PNEUMATIC PRESSES |
| BS EN 1777:2010 | Hydraulic platforms (HPs) for fire fighting and rescue services. Safety requirements and testing |
| 15/30324856 DC : 0 | BS EN 115-1 - SAFETY OF ESCALATORS AND MOVING WALKS - PART 1: CONSTRUCTION AND INSTALLATION |
| EN 60669-1:2018 | Switches for household and similar fixed electrical installations - Part 1: General requirements |
| BS EN 1218-4 : 2004 | SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 4: EDGE BANDING MACHINES FED BY CHAIN(S) |
| UNE-EN 15650:2010 | Ventilation for buildings - Fire dampers |
| BS EN 13617-1:2012 | Petrol filling stations Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units |
| BS EN 50532:2010 | Compact equipment assembly for distribution substations (CEADS) |
| UNE-EN 14744:2006 | Inland navigation vessels and sea-going vessels - Navigation light |
| BS EN 12621 : 2006 | MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS |
| BS EN 1596:1998 | Specification for dedicated liquefied petroleum gas appliances. Mobile and portable non-domestic forced convection direct fired air heaters |
| BS EN 500-1 : 2006 | MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 1: COMMON REQUIREMENTS |
| BS EN 13836:2006 | Gas fired central heating boilers. Type B boilers of nominal heat input exceeding 300 kW, but not exceeding 1000 kW |
| BS EN 12336 : 2005 | TUNNELLING MACHINES - SHIELD MACHINES, THRUST BORING MACHINES, AUGER BORING MACHINES, LINING ERECTION EQUIPMENT - SAFETY REQUIREMENTS |
| BS EN 13112 : 2002 | TANNERY MACHINES - SPLITTING AND BANDKNIFE SHEARING MACHINES - SAFETY REQUIREMENTS |
| UNE-EN 13288:2006 | Food processing machinery - Bowl lifting and tilting machines - Safety and hygiene requirements |
| BS EN 13289 : 2001 | PASTA PROCESSING PLANTS - DRYERS AND COOLERS - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 14710-1 : 2005 | FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITHOUT PRIMER - PART 1: CLASSIFICATION, GENERAL AND SAFETY REQUIREMENTS |
| BS EN 13208 : 2003 | FOOD PROCESSING MACHINERY - VEGETABLE PEELERS - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 88-1 : 2011 | PRESSURE REGULATORS AND ASSOCIATED SAFETY DEVICES FOR GAS APPLIANCES - PART 1: PRESSURE REGULATORS FOR INLET PRESSURES UP TO AND INCLUDING 50 KPA |
| EN 15597-1:2009 | Winter maintenance equipment — Spreading machines (gritting machines) — Part 1: General requirements and definitions for spreading machines |
| EN 50134-3:2012/AC:2015 | Alarm systems - Social alarm systems - Part 3: Local unit and controller |
| BS EN 12514-2:2000 | Installations for oil supply systems for oil burners Safety requirements and tests. Parts, valves, pipes, filters, oil de-aerators, meters |
| EN 13525:2005+A2:2009 | Forestry machinery - Wood chippers - Safety |
| 17/30361391 DC : 0 | BS EN 50174-2 - INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 2: INSTALLATION PLANNING AND PRACTICES INSIDE BUILDINGS |
| BS EN 982 : 1996 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - HYDRAULICS |
| BS EN 14175-2:2003 | Fume cupboards Safety and performance requirements |
| BS EN 15339-2:2007 | Thermal spraying. Safety requirements for thermal spraying equipment Gas control units |
| UNE-EN 741:2000 | Continuous handling equipment and systems - Safety requirements for systems and their components for pneumatic handling of bulk materials |
| UNE-EN 1175-1:1998 | SAFETY OF INDUSTRIAL TRUCKS. ELECTRICAL REQUIREMENTS. PART 1: GENERAL REQUIREMENTS FOR BATTERY POWERED TRUCKS. |
| BS EN 12067-2:2004 | Gas/air ratio controls for gas burners and gas burning appliances Electronic types |
| BS EN 12779:2015 | Safety of woodworking machines. Chip and dust extraction systems with fixed installation. Safety requirements |
| BS EN 13204 : 2004 | DOUBLE ACTING HYDRAULIC RESCUE TOOLS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS |
| BS EN 12184:2014 | Electrically powered wheelchairs, scooters and their chargers. Requirements and test methods |
| EN 62852:2015 | Connectors for DC-application in photovoltaic systems - Safety requirements and tests |
| UNE-EN 60079-0:2013 | Explosive atmospheres - Part 0: Equipment - General requirements |
| BS EN 12012-3 : 2001 | PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 3: SAFETY REQUIREMENTS FOR SHREDDERS |
| UNE-EN 62271-201:2015 | High-voltage switchgear and controlgear - Part 201: AC solid-insulation enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV |
| BS EN 15033:2006 | Room sealed storage water heaters for the production of sanitary hot water using LPG for vehicles and boats |
| UNE-EN 12649:2009 | Concrete compactors and smoothing machines - Safety |
| EN 62752:2016 | In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD) |
| BS EN 1674:2015 | Food processing machinery. Dough sheeters. Safety and hygiene requirements |
| UNE-EN 50526-2:2014 | Railway applications - Fixed installations - D.C. surge arresters and voltage limiting devices - Part 2: Voltage limiting devices |
| BS EN 415-3 : 2000 | SAFETY OF PACKAGING MACHINES - PART 3: FORM, FILL AND SEAL MACHINES |
| UNE-EN 415-6:2014 | Safety of packaging machines - Part 6: Pallet wrapping machines |
| BS EN 201:2009 | Plastics and rubber machines. Injection moulding machines. Safety requirements |
| BS EN 62109-1:2010 | Safety of power converters for use in photovoltaic power systems General requirements |
| BS EN 12952-11:2007 | Water-tube boilers and auxiliary installations Requirements for limiting devices of the boiler and accessories |
| BS EN 777-4:2009 | Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use System H. Safety |
| DIN EN 12098-1:2013-10 | ENERGY PERFORMANCE OF BUILDINGS - CONTROLS FOR HEATING SYSTEMS - PART 1: CONTROL EQUIPMENT FOR HOT WATER HEATING SYSTEMS - MODULES M3-5, 6, 7, 8 |
| EN 13718-1:2014 | Medical vehicles and their equipment - Air ambulances - Part 1: Requirements for medical devices used in air ambulances |
| BS EN 12953-9:2007 | Shell boilers Requirements for limiting devices of the boiler and accessories |
| BS EN 12717 : 2001 | SAFETY OF MACHINE TOOLS - DRILLING MACHINES |
| UNE-EN 1248:2001 | Foundry Machinery - Safety requirements for abrasive blasting equipment. |
| UNE-EN 50206-2:2011 | Railway applications - Rolling stock - Pantographs: Characteristics and tests -- Part 2: Pantographs for metros and light rail vehicles |
| BS EN 777-1:2009 | Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use System D. Safety |
| UNE-EN 16005:2013 | Power operated pedestrian doorsets - Safety in use - Requirements and test methods |
| UNE-EN 1870-15:2013 | Safety of woodworking machines - Circular sawing machines - Part 15: Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading |
| BS EN 1987-3:1998 | Electrically propelled road vehicles. Specific requirements for safety Protection of users against electrical hazards |
| BS EN 61140 : 2002 | PROTECTION AGAINST ELECTRIC SHOCK - COMMON ASPECTS FOR INSTALLATION AND EQUIPMENT |
| UNE-EN 50131-2-7-2:2013 | Alarm systems - Intrusion and hold-up systems - Part 2-7-2: Intrusion detectors - Glass break detectors (passive) |
| UNE-EN 13114:2002 | Tannery machines- Rotating process vessels - Safety requirements. |
| BS EN 1807 : 1999 | SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES |
| UNE-EN 12622:2011 | Safety of machine tools - Hydraulic press brakes |
| BS EN 1034-2 : 2005 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 2: BARKING DRUMS |
| BS EN 12978 : 2003 | INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY DEVICES FOR POWER OPERATED DOORS AND GATES - REQUIREMENTS AND TEST METHODS |
| BS EN 13985 : 2003 | MACHINE TOOLS - SAFETY - GUILLOTINE SHEARS |
| UNE-EN 12505:2001 | FOOD PROCESSING MACHINERY. CENTRIFUGAL MACHINES FOR PROCESSING EDIBLE OILS AND FATS. SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 13288 : 2005 | FOOD PROCESSING MACHINERY - BOWL LIFTING AND TILTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 13237:2012 | Potentially explosive atmospheres. Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres |
| BS EN 12348 : 2000 | CORE DRILLING MACHINES ON A STAND - SAFETY |
| BS EN 12094-4:2004 | Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for container valve assemblies and their actuators |
| BS EN 509:2000 | Decorative fuel-effect gas appliances |
| BS EN 415-7 : 2006 | SAFETY OF PACKAGING MACHINES - PART 7: GROUP AND SECONDARY PACKAGING MACHINES |
| BS EN 1870-3:2014 | Safety of woodworking machines. Circular sawing machines Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches |
| BS EN 12041:2014 | Food processing machinery. Moulders. Safety and hygiene requirements |
| BS EN 972 : 1998 | TANNERY MACHINES - RECIPROCATING ROLLER MACHINES - SAFETY REQUIREMENTS |
| UNE-EN 454:2015 | Food processing machinery - Planetary mixers - Safety and hygiene requirements |
| I.S. EN 13718-1:2014 | MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS FOR MEDICAL DEVICES USED IN AIR AMBULANCES |
| BS EN 13060 : 2014 | SMALL STEAM STERILIZERS |
| BS EN 1854:2010 | Pressure sensing devices for gas burners and gas burning appliances |
| UNE-EN 50380:2003 | Datasheet and nameplate information for photovoltaic modules |
| UNE-EN 60255-1:2010 | Measuring relays and protection equipment -- Part 1: Common requirements |
| UNE-EN 12750:2013 | Safety of woodworking machines - Four sided moulding machines |
| BS EN 1218-5 : 2004 | SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 5: ONE SIDE PROFILING MACHINES WITH FIXED TABLE AND FEED ROLLERS OR FEED CHAIN |
| UNE-EN 1020:2010 | Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300 kW incorporating a fan to assist transportation of combustion air or combustion products |
| BS EN 12750:2013 | Safety of woodworking machines. Four sided moulding machines |
| BS EN 54-2 : 1998 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 2: CONTROL AND INDICATING EQUIPMENT |
| BS EN 1248 : 2001 | FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR ABRASIVE BLASTING EQUIPMENT |
| UNE-EN 14960:2014 | Inflatable play equipment - Safety requirements and test methods |
| BS EN 1870-11:2013 | Safety of woodworking machines. Circular sawing machines Semi automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws) |
| 08/30182527 DC : DRAFT MAY 2008 | BS EN 50122-1 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRICAL SAFETY, EARTHING AND BONDING - PART 1: PROTECTIVE PROVISIONS AGAINST ELECTRIC SHOCK |
| DIN EN 12309-2:2016-04 | GAS-FIRED SORPTION APPLIANCES FOR HEATING AND/OR COOLING WITH A NET HEAT INPUT NOT EXCEEDING 70 KW - PART 2: SAFETY |
| BS EN 14492-1 : 2006 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| UNE-HD 60364-5-51:2010 | Electrical installations of buildings -- Part 5-51: Selection and erection of electrical equipment - Common rules |
| BS EN 983 : 1996 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - PNEUMATICS |
| UNE-EN 13617-1:2012 | Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units |
| BS EN 230:2005 | Automatic burner control systems for oil burners |
| BS EN 1501-1 : 2011 | REFUSE COLLECTION VEHICLES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 1: REAR LOADED REFUSE COLLECTION VEHICLES |
| BS EN 1870-4:2012 | Safety of woodworking machines. Circular sawing machines Multiblade rip sawing machines with manual loading and/or unloading |
| BS EN 81-20:2014 | Safety rules for the construction and installation of lifts. Lifts for the transport of persons and goods Passenger and goods passenger lifts |
| BS EN 422:2009 | Plastics and rubber machines. Blow moulding machines. Safety requirements |
| ISO 16484-2:2004 | Building automation and control systems (BACS) — Part 2: Hardware |
| BS EN 13463-8:2003 | Non-electrical equipment for potentially explosive atmospheres Protection by liquid immersion \'k\' |
| BS EN 483 : 2000 | GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT NOT EXCEEDING 70 KW |
| BS EN 12259-5:2002 | Fixed firefighting systems. Components for sprinkler and water spray systems Water flow detectors |
| BS EN 676 : 2003 | AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS |
| UNI EN 12301 : 2008 | PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS |
| EN 50125-2:2002/corrigendum:2010 | RAILWAY APPLICATIONS - ENVIRONMENTAL CONDITIONS FOR EQUIPMENT - PART 2: FIXED ELECTRICAL INSTALLATIONS |
| BS EN 14010 : 2003 | |
| BS EN 13035-9 : 2006 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 9: WASHING INSTALLATIONS |
| BS EN 12094-10:2003 | Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for pressure gauges and pressure switches |
| BS EN 60898-1 : 2003 | ELECTRICAL ACCESSORIES - CIRCUIT BREAKERS FOR OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR INSTALLATIONS - PART 1: CIRCUIT-BREAKERS FOR A.C. OPERATION |
| UNE-EN 860:2007 | Safety of woodworking machines - One side thickness planing machines |
| UNE-EN 619:2003 | Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads. |
| 09/30202403 DC : 0 | BS EN 50532 - COMPACT EQUIPMENT ASSEMBLY FOR DISTRIBUTION SUBSTATIONS (CEADS) |
| UNE-EN 12184:2014 | Electrically powered wheelchairs, scooters and their chargers - Requirements and test methods |
| 08/30160532 DC : DRAFT MAY 2008 | BS EN 50122-1 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRICAL SAFETY, EARTHING AND BONDING - PART 1: PROTECTIVE PROVISIONS AGAINST ELECTRIC SHOCK |
| BS EN 12255-1:2002 | Wastewater treatment plants General construction principles |
| BS EN 1760-2 : 2001 | SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE EDGES AND PRESSURE SENSITIVE BARS |
| UNE-EN 617:2002 | Continuous handling equipment and systems- Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers. |
| BS EN 1870-13 : 2007 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES |
| BS EN 13160-6:2003 | Leak detection systems Sensors in monitoring wells |
| BS EN 12415:2001 | Safety of machine tools. Small numerically controlled turning machines and turning centres |
| BS EN 12044 : 2005 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - CUTTING AND PUNCHING MACHINES - SAFETY REQUIREMENTS |
| BS EN 1808:2015 | Safety requirements for suspended access equipment. Design calculations, stability criteria, construction. Examinations and tests |
| BS EN 12514-1:2000 | Installations for oil supply systems for oil burners Safety requirements and tests. Parts, oil feed pumps, control and safety devices, supply tanks |
| BS EN 12094-1:2003 | Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for electrical automatic control and delay devices |
| BS EN 1643:2014 | Safety and control devices for gas burners and gas burning appliances. Valve proving systems for automatic shut-off valves |
| UNE-EN 62115:2006 | Electric toys - Safety (IEC 62115:2003 + A1:2004, modified) |
| BS EN 12957 : 2001 | MACHINE TOOLS - SAFETY - ELECTRO DISCHARGE MACHINES |
| UNE-EN 60598-2-21:2015 | Luminaires - Part 2-21: Particular requirements - Rope lights |
| UNE-EN 60400:2011 | Lampholders for tubular fluorescent lamps and starterholders |
| UNE-EN 13112:2002 | Tannery machines - Splitting and bandknife shearing machines - Safety requirements. |
| BS EN 13788:2002 | Machine tools. Safety. Multi-spindle automatic turning machines |
| EN 60092-507:2015/AC:2015 | ELECTRICAL INSTALLATIONS IN SHIPS - PART 507: SMALL VESSELS |
| UNE-EN 12409:2009 | Plastics and rubber machines - Thermoforming machines - Safety requirements |
| BS EN 1710 : 2005 | EQUIPMENT AND COMPONENTS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES |
| ISO 18081:2016 | Non-destructive testing — Acoustic emission testing (AT) — Leak detection by means of acoustic emission |
| UNE-EN 14543:2006 | Specification for dedicated liquefied petroleum gas appliances - Parasol patio heaters - Flueless radiant heaters for outdoor or amply ventilated area use |
| BS EN 13114 : 2002 | TANNERY MACHINES - ROTATING PROCESS VESSELS - SAFETY REQUIREMENTS |
| UNE-EN 12158-1:2001 | Builders hoists for goods. Part 1: Hoists with accessible platforms. |
| UNE-EN 50532:2011 | Compact Equipment Assembly for Distribution Substations (CEADS) |
| PD ISO/TR 14799-2:2005 | Comparison of worldwide escalator and moving walk safety standards Abbreviated comparison and comments |
| UNE-EN 13525:2005 | Forestry machinery - Wood chippers - Safety |
| BS EN 40-2:2004 | Lighting columns General requirements and dimensions |
| BS EN 12405:2002 | Gas meters. Gas-volume electronic conversion devices |
| BS EN 1970:2000 | Adjustable beds for disabled persons. Requirements and test methods |
| UNE-EN 1870-9:2013 | Safety of woodworking machines - Circular sawing machines - Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading |
| BS EN 50521 : 2009 | CONNECTORS FOR PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS |
| BS EN 13862 : 2001 | FLOOR CUTTING-OFF MACHINES - SAFETY |
| UNE-EN 1643:2014 | Safety and control devices for gas burners and gas burning appliances - Valve proving systems for automatic shut-off valves |
| BS EN 13113 : 2002 | TANNERY MACHINES - ROLLER COATING MACHINES - SAFETY REQUIREMENTS |
| BS EN 13485:2001 | Thermometers for measuring the air and product temperature for the trans port, storage and distribution of chilled, frozen,deep-frozen/quick-froz en food and ice cream. Tests, performance, suitability |
| BS EN 50156-1:2015 | Electrical equipment for furnaces and ancillary equipment Requirements for application design and installation |
| BS EN 378-3:2016 | Refrigerating systems and heat pumps. Safety and environmental requirements Installation site and personal protection |
| 08/30179116 DC : DRAFT MAR 2008 | BS EN 50521 - CONNECTORS FOR PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS |
| BS EN 1114-3 : 2001 | PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS |
| BS EN 12067-1:1999 | Gas/air ratio controls for gas burners and gas burning appliances Pneumatic types |
| I.S. EN 13525:2005 | FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY |
| UNE-EN 1247:2005 | Foundry machinery - Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi continous casting machines |
| BS EN 1266:2002 | Independent gas-fired convection heaters incorporating a fan to assist transportation of combustion air and/or flue gases |
| BS EN 14597:2012 | Temperature control devices and temperature limiters for heat generating systems |
| BS EN 60204-33:2011 | Safety of machinery. Electrical equipment of machines Requirements for semiconductor fabrication equipment |
| BS EN 13870:2015 | Food processing machinery. Portion cutting machines. Safety and hygiene requirements |
| BS EN 60077-1:2017 | Railway applications. Electric equipment for rolling stock General service conditions and general rules |
| UNE-EN 1870-16:2013 | Safety of woodworking machines - Circular sawing machines - Part 16: Double mitre sawing machines for V cutting |
| UNE-EN 1175-3:1998 | SAFETY OF INDUSTRIAL TRUCKS. ELECTRICAL REQUIREMENTS. PART 3: SPECIFIC REQUIREMENTS FOR THE ELECTRIC POWER TRANSMISSION SYSTEMS OF INTERNAL COMBUSTION ENGINE POWERED TRUCKS. |
| BS EN 536:2015 | Road construction machines. Mixing plants for road construction materials. Safety requirements |
| BS EN 50491-2 : 2010 | GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 2: ENVIRONMENTAL CONDITIONS |
| UNE-EN 13591:2006 | Food processing machinery - Fixed deck oven loaders - Safety and hygiene requirements |
| BS EN 60439-1:1999 | Low-voltage switchgear and controlgear assemblies Type-tested and partially type-tested assemblies |
| UNE-EN 13352:2012 | Specification for the performance of automatic tank contents gauges |
| UNE-EN 940:2010 | Safety of woodworking machines - Combined woodworking machines |
| BS EN 12098-2:2001 | Controls for heating systems Optimum start-stop control equipment for hot water heating systems |
| UNE-EN 60335-1:2012 | Household and similar electrical appliances - Safety - Part 1: General requirements |
| UNE-EN 13389:2006 | Food processing machinery. Mixers with horizontal shafts. Safety and hygiene requirements. |
| UNE-EN 13871:2015 | Food processing machinery - Cubes cutting machinery - Safety and hygiene requirements |
| UNE-EN 1859:2010 | Chimneys - Metal chimneys - Test methods |
| UNE-EN 12050-1:2015 | Wastewater lifting plants for buildings and sites - Part 1: Lifting plants for wastewater containing faecal matter |
| BS EN 13190:2001 | Dial thermometers |
| UNE-EN 81-72:2015 | Safety rules for the construction and installation of lifts - Particular applications for passenger and goods passenger lifts - Part 72: Firefighters lifts |
| 09/30205281 DC : 0 | BS EN 50191 - ERECTION AND OPERATION OF ELECTRICAL TEST EQUIPMENT |
| BS EN 1870-5 : 2002 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 5: CIRCULAR SAW BENCHES/UP-CUTTING CROSS-CUT SAWING MACHINES |
| UNE-EN 859:2008 | Safety of woodworking machines - Hand fed surface planing machines |
| BS EN 13591 : 2005 | FOOD PROCESSING MACHINERY - FIXED DECK OVEN LOADERS - SAFETY AND HYGIENE REQUIREMENTS |
| UNE-EN 12309-2:2015 | Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW - Part 2: Safety |
| UNE-EN 12368:2015 | Traffic control equipment - Signal heads |
| UNE-EN 26:2016 | Gas-fired instantaneous water heaters for the production of domestic hot water |
| BS EN 1760-1 : 1998 | SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE MATS AND PRESSURE SENSITIVE FLOORS |
| BS EN 50122-1 : 2011 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRICAL SAFETY, EARTHING AND THE RETURN CIRCUIT - PART 1: PROTECTIVE PROVISIONS AGAINST ELECTRIC SHOCK |
| UNE-EN 620:2002 | Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials |
| 12/30260546 DC : 0 | BS EN 50156-1 - ELECTRICAL EQUIPMENT FOR FURNACES AND ANCILLARY EQUIPMENT - PART 1: REQUIREMENTS FOR APPLICATION DESIGN AND INSTALLATION |
| UNE-EN 618:2002 | Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors. |
| BS EN 860 : 2007 | SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANING MACHINES |
| UNE-EN 778:2010 | Domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 70 kW, without a fan to assist transportation of combustion air and/or combustion products |
| EN 50119 : 2009 AMD 1 2013 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES |
| UNE-EN 15595:2009 | Railway applications - Braking - Wheel slide protection |
| UNE-EN 12158-2:2001 | Builders hoists for goods - Part 2: Inclined hoists with non-accessible load carrying devices. |
| UNE-EN 13113:2002 | Tannery machines - Roller coating machines - Safety requirements. |
| UNE-EN 62560:2013 | Self-ballasted LED-lamps for general lighting services by voltage > 50 V - Safety specifications |
| UNE-HD 60364-7-721:2011 | Low-voltage electrical installations - Part 7-721: Requirements for special installations or locations - Electrical installations in caravans and motor caravans |
| BS EN 12854 : 2003 | FOOD PROCESSING MACHINERY - BEAM MIXERS - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 62282-2:2012 | Fuel cell technologies Fuel cell modules |
| UNE-EN 13870:2016 | Food processing machinery - Portion cutting machines - Safety and hygiene requirements |
| UNE-EN 50131-2-7-3:2013 | Alarm systems - Intrusion and hold-up systems - Part 2-7-3: Intrusion detectors - Glass break detectors (active) |
| 98/203095 DC : DRAFT JULY 1998 | PRENV 50275-2-3 - CONDUCTIVE CHARGING FOR ELECTRIC VEHICLES - PART 2-3: D.C. CHARGING STATION |
| UNE-EN 12050-2:2015 | Wastewater lifting plants for buildings and sites - Part 2: Lifting plants for faecal-free wastewater |
| BS EN 12182:2012 | Assistive products for persons with disability. General requirements and test methods |
| UNE-EN 60079-2:2015 | Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure "p" |
| UNE-EN 61243-3:2015 | Live working - Voltage detectors - Part 3: Two-pole low-voltage type |
| DIN EN 15095:2009-06 | POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS |
| BS EN 62841-1:2015 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety General requirements |
| UNE-EN 62282-2:2012 | Fuel cell technologies - Part 2: Fuel cell modules |
| UNE-EN 12178:2017 | Refrigerating systems and heat pumps - Liquid level indicating devices - Requirements, testing and marking |
| BS EN 303-4:1999 | Heating boilers. Heating boilers with forced draught burners Heating boilers with forced draught burners. Special requirements for boilers with forced draught oil burners with outputs up to 70 kW and a maximum operating pressure of 3 bar. Terminology, special requirements, testing and marking |
| BS EN 1864:2008 | Inland navigation vessels. Wheelhouse. Ergonomic and safety requirements |
| UNE-EN 1114-1:2012 | Plastics and rubber machines - Extruders and extrusion lines - Part 1: Safety requirements for extruders |
| BS EN 1012-2 : 1997 | COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 2: VACUUM PUMPS |
| EN 45510-2-9 : 2008 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-9: ELECTRICAL EQUIPMENT - CABLING SYSTEMS |
| EN 62196-1:2014 | Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements |
| EN 61241-0:2006 | Electrical apparatus for use in the presence of combustible dust - Part 0: General requirements |
| EN 50411-3-1:2012 | Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 3-1: Fibre management system, splice wall box, for category C & G |
| CLC/TS 50131-2-10:2014 | Alarm systems - Intrusion and hold-up systems - Part 2-10: Intrusion detectors - Lock state contacts (magnetic) |
| EN 175301-803:2006 | Detail Specification: Rectangular connectors - Flat contacts, 0,8 mm thickness, locking screw not detachable |
| CLC/TS 50467 : 2008 COR 2008 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS |
| EN 62271-204:2011 | High-voltage switchgear and controlgear - Part 204: Rigid gas-insulated transmission lines for rated voltage above 52 kV |
| EN 62549:2011 | Articulated systems and flexible systems for cable guiding |
| EN 61526:2013 | Radiation protection instrumentation - Measurement of personal dose equivalents Hp(10) and Hp(0,07) for X, gamma, neutron and beta radiations - Direct reading personal dose equivalent meters |
| EN 62310-3:2008 | Static transfer systems (STS) - Part 3: Method for specifying performance and test requirements |
| EN 50617-1:2015 | Railway applications - Technical parameters of train detection systems for the interoperability of the trans-European railway system - Part 1: Track circuits |
| EN 50284:1999 | Special requirements for construction, test and marking of electrical apparatus of equipment group II, Category 1 G |
| EN 837-3:1996 | Pressure gauges - Part 3: Diaphragm and capsule pressure gauges - Dimensions, metrology, requirements and testing |
| EN 14817:2006 | Railway applications - Suspension components - Air spring control elements |
| EN 741:2000+A1:2010 | Continuous handling equipment and systems - Safety requirements for systems and their components for pneumatic handling of bulk materials |
| EN 15954-2:2013 | Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements |
| EN 691-1:2012 | Safety of woodworking machines - Part 1: Common requirements |
| EN 81-43:2009 | Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 43: Lifts for cranes |
| EN 15220:2016 | Railway applications - Brake indicators |
| EN 16304:2013 | Automatic vent valves for gas burners and gas burning appliances |
| EN 16207:2014 | Railway applications - Braking - Functional and performance criteria of Magnetic Track Brake systems for use in railway rolling stock |
| EN 1987-1:1997 | Electrically propelled road vehicles - Specific requirements for safety - Part 1: On board energy storage |
| EN 13788 : 2001 | MACHINE TOOLS - SAFETY - MULTI-SPINDLE AUTOMATIC TURNING MACHINES |
| EN 1570-1:2011+A1:2014 | Safety requirements for lifting tables - Part 1: Lifting tables serving up to two fixed landings |
| EN 54-21:2006 | Fire detection and fire alarm systems - Part 21: Alarm transmission and fault warning routing equipment |
| EN 1458-1:2011 | Domestic direct gas-fired tumble dryers of types B22D and B23D, of nominal heat input not exceeding 6 kW - Part 1: Safety |
| EN 609-2:1999+A1:2009 | Agricultural and forestry machinery - Safety of log splitters - Part 2: Screw splitters |
| EN ISO 18081:2016 | Non-destructive testing - Acoustic emission testing (AT) - Leak detection by means of acoustic emission (ISO 18081:2016) |
| EN 15467:2014 | Food processing machinery - Fish heading and filleting machines - Safety and hygiene requirements |
| EN 13885:2005+A1:2010 | Food processing machinery - Clipping machines - Safety and hygiene requirements |
| EN 13637:2015 | Building hardware - Electrically controlled exit systems for use on escape routes - Requirements and test methods |
| EN 40-2:2004 | Lighting columns - Part 2: General requirements and dimensions |
| EN 1808:2015 | Safety requirements for suspended access equipment - Design calculations, stability criteria, construction - Examinations and tests |
| EN 201:2009 | Plastics and rubber machines - Injection moulding machines - Safety requirements |
| EN 54-23:2010 | Fire detection and fire alarm systems - Part 23: Fire alarm devices - Visual alarm devices |
| EN 14543:2017 | Specification for dedicated liquefied petroleum gas appliances - Parasol patio heaters - Flueless radiant heaters for outdoor or amply ventilated area use |
| EN 15774:2010 | Food processing machinery - Machines for processing fresh and filled pasta (tagliatelle, cannelloni, ravioli, tortellini, orecchiette and gnocchi) - Safety and hygiene requirements |
| EN 536:2015 | Road construction machines - Mixing plants for road construction materials - Safety requirements |
| EN 15955-2:2013 | Railway applications - Track - Demountable machines and associated equipment - Part 2: General safety requirements |
| EN 15500:2008 | Control for heating, ventilating and air-conditioning applications - Electronic individual zone control equipment |
| EN 15067:2007 | Plastics and rubber machines - Film converting machines for bags and sacks - Safety requirements |
| EI MODEL CODE SAFE PRACTICE PT1 : 2010 | THE SELECTION, INSTALLATION, INSPECTION, AND MAINTENANCE OF ELECTRICAL AND NON ELECTRICAL APPARATUS IN HAZARDOUS AREAS |
| EN 81-31:2010 | Safety rules for the construction and installation of lifts - Lifts for the transport of goods only - Part 31: Accessible goods only lifts |
| EN 1493:2010 | Vehicle lifts |
| EN 415-10:2014 | Safety of packaging machines - Part 10: General Requirements |
| EN 13675:2004+A1:2010 | Safety of machinery - Safety requirements for tube forming and rolling mills and their finishing line equipment |
| EN 619:2002+A1:2010 | Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads |
| EN 14466:2005+A1:2008 | Fire-fighting pumps - Portable pumps - Safety and performance requirements, tests |
| EN 621:2009 | Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, without a fan to assist transportation of combustion air and/or combustion products |
| EN 15433-6:2016 | Transportation loads - Measurement and evaluation of dynamic-mechanical loads - Part 6: Automatic recording systems for measuring randomly occurring shock during monitoring of transports |
| EN 777-2:2009 | Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 2: System E - Safety |
| EN 16678:2015 | Safety and control devices for gas burners and gas burning appliances - Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa |
| EN 14394:2005+A1:2008 | Heating boilers - Heating boilers with forced draught burners - Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 °C |
| EN 15001-1:2009 | Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
| EN 14471:2013+A1:2015 | Chimneys - System chimneys with plastic flue liners - Requirements and test methods |
| EN 422:2009 | Plastics and rubber machines - Blow moulding machines - Safety requirements |
| EN 525:2009 | Non-domestic direct gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW |
| EN 14597:2012 | Temperature control devices and temperature limiters for heat generating systems |
| EN 14989-2:2007 | Chimneys - Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications - Part 2: Flue and air supply ducts for room sealed appliances |
| EN 1755:2015 | Industrial Trucks - Safety requirements and verification - Supplementary requirements for operation in potentially explosive atmospheres |
| EN 415-8:2008 | Safety of packaging machines - Part 8: Strapping machines |
| EN 415-7:2006+A1:2008 | Safety of packaging machines - Part 7: Group and secondary packaging machines |
| EN 1915-1:2013 | Aircraft ground support equipment - General requirements - Part 1: Basic safety requirements |
| EN 14043:2014 | High rise aerial appliances for fire and rescue service use - Turntable ladders with combined movements - Safety and performance requirements and test methods |
| EN 953:1997+A1:2009 | Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards |
| EN 12984:2005+A1:2010 | Food processing machinery - Portable and/or hand-guided machines and appliances with mechanically driven cutting tools - Safety and hygiene requirements |
| EN 15094:2008 | Safety of Machinery - Safety requirements for cold flat rolling mills |
| EN 15164:2008 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for chain- and belt-slotting machines |
| EN 1672-1:2014 | Food processing machinery - Basic concepts - Part 1: Safety requirements |
| EN 54-3:2014 | Fire detection and fire alarm systems - Part 3: Fire alarm devices - Sounders |
| EN 14797:2006 | Explosion venting devices |
| EN 161:2011+A3:2013 | Automatic shut-off valves for gas burners and gas appliances |
| EN 15061:2007+A1:2008 | Safety of machinery - Safety requirements for strip processing line machinery and equipment |
| EN 15420:2010 | Gas-fired central heating boilers - Type C boilers of nominal heat input exceeding 70 kW, but not exceeding 1 000 kW |
| EN 609-1:2017 | Agricultural and forestry machinery - Safety of log splitters - Part 1: Wedge splitters |
| EN 16340:2014 | Safety and control devices for burners and appliances burning gaseous or liquid fuels - Combustion product sensing devices |
| EN 1612-2:2000+A1:2008 | Plastics and rubber machines - Reaction moulding machines - Part 2: Safety requirements for reaction moulding plant |
| EN 1987-3:1998 | Electrically propelled road vehicles - Specific requirements for safety - Part 3: Protection of users against electrical hazards |
| EN 15268:2008 | Petrol filling stations - Safety requirements for the construction of submersible pump assemblies |
| EN 16009:2011 | Flameless explosion venting devices |
| EN 14175-2:2003 | Fume cupboards - Part 2: Safety and performance requirements |
| EN 746-2:2010 | Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems |
| EN 15000:2008 | Safety of industrial trucks - Self propelled variable reach trucks - Specification, performance and test requirements for longitudinal load moment indicators and longitudinal load moment limiters |
| EN 16716:2017 | Mountaineering equipment - Avalanche airbag systems - Safety requirements and test methods |
| EN 1870-16:2012 | Safety of woodworking machines - Circular sawing machines - Part 16: Double mitre sawing machines for V cutting |
| EN 15949:2012 | Safety of machinery - Safety requirements for bar mills, structural steel mills and wire rod mills |
| EN 3660-063:2015 | Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 063: Cable outlet, style K, straight, for heat shrinkable boot, shielded, sealed, self-locking for EN 3645 - Product standard |
| EN 13591:2005+A1:2009 | Food processing machinery - Fixed deck oven loaders - Safety and hygiene requirements |
| EN 14957:2006+A1:2010 | Food processing machinery - Dishwashing machines with conveyor - Safety and hygiene requirements |
| EN 12159:2012 | Builders hoists for persons and materials with vertically guided cages |
| EN 453:2014 | Food processing machinery - Dough mixers - Safety and hygiene requirements |
| EN 15220-1:2008+A1:2011 | Railway applications - Brake indicators - Part 1: Pneumatically operated brake indicators |
| EN 15091:2013 | Sanitary tapware - Electronic opening and closing sanitary tapware |
| EN 1870-13:2007+A2:2012 | Safety of woodworking machines - Circular sawing machines - Part 13: Horizontal beam panel sawing machines |
| EN 12581:2005+A1:2010 | Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements |
| EN 15714-3:2009 | Industrial valves - Actuators - Part 3: Pneumatic part-turn actuators for industrial valves - Basic requirements |
| EN 778:2009 | Domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 70 kW, without a fan to assist transportation of combustion air and/or combustion products |
| EN 16864:2017 | Building hardware - Mechatronic padlocks - Requirements and test methods |
| EN 1807:1999+A1:2009 | Safety of woodworking machines - Band sawing machines |
| EN 1870-6:2017 | Safety of woodworking machines - Circular sawing machines - Part 6: Circular sawing machines for fire wood |
| EN 454:2014 | Food processing machinery - Planetary mixers - Safety and hygiene requirements |
| EN 1854:2010 | Pressure sensing devices for gas burners and gas burning appliances |
| EN 1760-2:2001+A1:2009 | Safety of machinery - Pressure sensitive protective devices - Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars |
| EN 16840:2017 | Inland navigation vessels - Electrical shore connection, three-phase current 400 V, 50 Hz, at least 250 A |
| EN 54-24:2008 | Fire detection and fire alarm systems - Part 24: Components of voice alarm systems - Loudspeakers |
| EN 13842:2004 | Oil fired forced convection air heaters - Stationary and transportable for space heating |
| EN 15869-2:2010 | Inland navigation vessels - Electrical shore connection, three phase current 400 V, up to 63 A, 50 Hz - Part 2: Onshore unit, safety requirements |
| EN 500-1:2006+A1:2009 | Mobile road construction machinery - Safety - Part 1: Common requirements |
| EN 16704-2-1:2016 | Railway applications - Track - Safety protection on the track during work - Part 2-1: Common solutions and technologies - Technical requirements for Track Warning Systems (TWS) |
| EN 14595:2016 | Tanks for transport of dangerous goods - Service equipment - Breather device |
| EN 13621:2004+A1:2010 | Food processing machinery - Salad dryers - Safety and hygiene requirements |
| EN 15093:2008 | Safety of Machinery - Safety requirements for hot flat rolling mills |
| EN 13616-1:2016 | Overfill prevention devices for static tanks for liquid fuels - Part 1: Overfill prevention devices with closure device |
| EN 14438:2006 | Gas-fired insets for heating more than one room |
| EN 13954:2005+A1:2010 | Food processing machinery - Bread slicers - Safety and hygiene requirements |
| EN 416-1:2009 | Single burner gas-fired overhead radiant tube heaters for non-domestic use - Part 1: Safety |
| EN 15166:2008 | Food processing machinery - Automatic back splitting machines of butchery carcasses - Safety and hygiene requirements |
| EN 88528-11 : 2004 | RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 11: ROTARY UNINTERRUPTIBLE POWER SYSTEMS - PERFORMANCE REQUIREMENTS AND TEST METHODS |
| EN 15859:2010 | Air Quality - Certification of automated dust arrestment plant monitors for use on stationary sources - Performance criteria and test procedures |
| EN 1760-3:2004+A1:2009 | Safety of machinery - Pressure sensitive protective devices - Part 3: General principles for the design and testing of pressure sensitive bumpers, plates, wires and similar devices |
| EN 54-16:2008 | Fire detection and fire alarm systems - Part 16: Voice alarm control and indicating equipment |
| EN 15431:2008 | Winter and road service area maintenance equipments - Power system and related controls - Interchangeability and performance requirements |
| EN 15333-1:2006/AC:2009 | FOOD PROCESSING MACHINERY - MACHINERY FOR GRINDING AND PROCESSING FLOUR AND SEMOLINA - SAFETY AND HYGIENE REQUIREMENTS |
| EN 16500:2014 | Machines for compacting waste materials or recyclable fractions - Vertical baling presses - Safety requirements |
| EN 1870-2:1999/AC:2002 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 2: HORIZONTAL BEAM PANEL SAWS AND VERTICAL PANEL SAWS |
| EN 419-1:2009 | Non-domestic gas-fired overhead luminous radiant heaters - Part 1: Safety |
| EN 15267-4:2017 | Air quality - Certification of automated measuring systems - Part 4: Performance criteria and test procedures for automated measuring systems for periodic measurements of emissions from stationary sources |
| EN 1889-1:2011 | Machines for underground mines - Mobile machines working underground - Safety - Part 1: Rubber tyred vehicles |
| EN 16314:2013 | Gas meters - Additional functionalities |
| EN 26:2015 | Gas-fired instantaneous water heaters for the production of domestic hot water |
| EN 1870-3:2014 | Safety of woodworking machines - Circular sawing machines - Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches |
| EN 15162:2008 | Machines and plants for mining and tooling of natural stone - Safety requirements for gang saws |
| EN 1870-18:2013 | Safety of woodworking machines - Circular sawing machines - Part 18: Dimension saws |
| EN 1870-14:2007+A2:2012 | Safety of woodworking machines - Circular sawing machines - Part 14: Vertical panel sawing machines |
| EN 45510-2-5:2002 | Guide for procurement of power station equipment - Part 2-5: Electrical equipment - Motors |
| EN 1807-2:2013 | Safety of woodworking machines - Band sawing machines - Part 2: Log sawing machines |
| EN 14710-1:2005+A2:2008 | Fire-fighting pumps - Fire-fighting centrifugal pumps without primer - Part 1: Classification, general and safety requirements |
| EN ISO 16484-2:2004 | Building automation and control systems (BACS) - Part 2: Hardware (ISO 16484-2:2004) |
| EN 15869-3:2010 | Inland navigation vessels - Electrical shore connection, three phase current 400 V, up to 63 A, 50 Hz - Part 3: On-board unit, safety requirements |
| EN 1398:2009 | Dock levellers - Safety requirements |
| EN 1374:2000+A1:2010 | Agricultural machinery - Silos stationary unloaders for round silos - Safety |
| EN 777-1:2009 | Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 1: System D - Safety |
| EN 45510-2-7:2002 | Guide for procurement of power station equipment - Part 2-7: Electrical equipment - Switchgear and controlgear |
| EN 13836:2006 | Gas fired central heating boilers - Type B boilers of nominal heat input exceeding 300 kW, but not exceeding 1 000 kW |
| EN 1870-1:2007+A1:2009 | Safety of woodworking machines - Circular sawing machines - Part 1: Circular saw benches (with and without sliding table), dimension saws and building site saws |
| EN 1870-5 : 2002 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 5: CIRCULAR SAWBENCHES/UP-CUTTING CROSS-CUT SAWING MACHINES |
| EN 13871:2014 | Food processing machinery - Cubes cutting machinery - Safety and hygiene requirements |
| EN 45510-2-4:2000 | Guide for procurement of power station equipment - Part 2-4: Electrical equipment - High power static convertors |
| EN 15165:2014 | Food processing machinery - Forming machines - Safety and hygiene requirements |
| EN 1870-7:2012 | Safety of woodworking machines - Circular sawing machines - Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading |
| EN 1870-19:2013 | Safety of woodworking machines - Circular sawing machines - Part 19: Circular saw benches (with and without sliding table) and building site saws |
| EN 983:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics |
| EN 303-1:2017 | Heating boilers - Part 1: Heating boilers with forced draught burners - Terminology, general requirements, testing and marking |
| EN 15714-4:2009 | Industrial valves - Actuators - Part 4: Hydraulic part-turn actuators for industrial valves - Basic requirements |
| EN 13763-25:2004 | Explosives for civil uses - Detonators and relays - Part 25: Determination of transfer capability of surface connectors, relays and coupling accessories |
| EN 12978:2003+A1:2009 | Industrial, commercial and garage doors and gates - Safety devices for power operated doors and gates - Requirements and test methods |
| EN 1864:2008 | Inland navigation vessels - Wheelhouse - Ergonomic and safety requirements |
| EN 14044:2014 | High rise aerial appliances for fire and rescue service use - Turntable ladders with sequential movements - Safety and performance requirements and test methods |
| EN 1760-1:1997+A1:2009 | Safety of machinery - Pressure sensitive protective devices - Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors |
| EN 1870-17:2012+A1:2015 | Safety of woodworking machines - Circular sawing machines - Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit (radial arm saws) |
| EN 14154-4:2014 | Water meters - Part 4: Additional functionalities |
| EN 815:1996+A2:2008 | Safety of unshielded tunnel boring machines and rodless shaft boring machines for rock - Safety requirements |
| EN 15194:2017 | Cycles - Electrically power assisted cycles - EPAC Bicycles |
| EN 859:2007+A2:2012 | Safety of woodworking machines - Hand fed surface planing machines |
| EN 14033-3:2017 | Railway applications - Track - Railbound construction and maintenance machines - Part 3: General safety requirements |
| EN 1175-3:1998+A1:2010 | Safety of industrial trucks - Electrical requirements - Part 3: Specific requirements for the electric power transmission systems of internal combustion engine powered trucks |
| EN 13485:2001 | Thermometers for measuring the air and product temperature for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream - Tests, performance, suitability |
| EN 13732:2013 | Food processing machinery - Bulk milk coolers on farms - Requirements for performance, safety and hygiene |
| EN 1674:2015 | Food processing machinery - Dough sheeters - Safety and hygiene requirements |
| EN 15270:2007 | Pellet burners for small heating boilers - Definitions, requirements, testing, marking |
| EN 14886:2008 | Plastics and rubber machines - Bandknife cutting machines for block foams - Safety requirements |
| EN 861:2007+A2:2012 | Safety of woodworking machines - Surface planing and thicknessing machines |
| EN 15267-3:2007 | Air quality - Certification of automated measuring systems - Part 3: Performance criteria and test procedures for automated measuring systems for monitoring emissions from stationary sources |
| EN 940:2009+A1:2012 | Safety of woodworking machines - Combined woodworking machines |
| EN 848-2 : 2007 COR 2012 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HAND FED/INTEGRATED FED ROUTING MACHINES |
| EN 14655:2005+A1:2010 | Food processing machinery - Baguette slicers - Safety and hygiene requirements |
| EN 1870-8:2012 | Safety of woodworking machines - Circular sawing machines - Part 8: Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading |
| EN 16743:2016 | Food processing machinery - Automatic industrial slicing machines - Safety and hygiene requirements |
| EN 1648-2:2018 | Leisure accommodation vehicles - 12 V direct current extra low voltage electrical installations - Part 2: Motor caravans |
| EN 777-3:2009 | Multi-burner gas-fired overhead radiant tube heater systems for non domestic use - Part 3: System F - Safety |
| EN 1859:2009+A1:2013 | Chimneys - Metal chimneys - Test methods |
| EN 3660-066:2017 | Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 066: Cable outlet, style K, 90°, for heat shrinkable boot, shielded, sealed - Product standard |
| EN 12158-2:2000+A1:2010 | Builders' hoists for goods - Part 2: Inclined hoists with non-accessible load carrying devices |
| EN 15861:2012 | Food processing machinery - Smokehouses - Safety and hygiene requirements |
| EN 15572:2015 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for edge finishing machines |
| EN 1889-2:2003+A1:2009 | Machines for underground mines - Mobile machines working underground - Safety - Part 2: Rail locomotives |
| EN 16479:2014 | Water quality - Performance requirements and conformity test procedures for water monitoring equipment - Automated sampling devices (samplers) for water and waste water |
| EN 14960:2013 | Inflatable play equipment - Safety requirements and test methods |
| EN 14010:2003+A1:2009 | Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages |
| EN 1870-4:2012 | Safety of woodworking machines - Circular sawing machines - Part 4: Multiblade rip sawing machines with manual loading and/or unloading |
| EN 415-6:2013 | Safety of packaging machines - Part 6: Pallet wrapping machines |
| EN 777-4:2009 | Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 4: System H - Safety |
| EN 16327:2014 | Fire-fighting - Positive-pressure proportioning systems (PPPS) and compressed-air foam systems (CAFS) |
| EN 15180:2014 | Food processing machinery - Food depositors - Safety and hygiene requirements |
| EN 289:2014 | Plastics and rubber machines - Compression moulding machines and transfer moulding machines - Safety requirements |
| EN 303-4:1999 | Heating boilers - Part 4: Heating boilers with forced draught burners - Special requirements for boilers with forced draught oil burners with outputs up to 70 kW and a maximum operating pressure of 3 bar - Terminology, special requirements, testing and marking |
| EN 230:2005 | Automatic burner control systems for oil burners |
| EN 415-5:2006+A1:2009 | Safety of packaging machines - Part 5: Wrapping machines |
| EN 45510-2-3:2000 | Guide for procurement of power station equipment - Part 2-4: Electrical equipment - Stationary batteries and chargers |
| EN 848-3:2012 | Safety of woodworking machines - One side moulding machines with rotating tool - Part 3: Numerically controlled (NC) boring and routing machines |
| UNI EN 656 : 2008 | GAS-FIRED CENTRAL HEATING BOILERS - TYPE B BOILERS OF NOMINAL HEAT INPUT EXCEEDING 70 KW, BUT NOT EXCEEDING 300 KW |
| EN 1648-1:2018 | Leisure accommodation vehicles - 12 V direct current extra low voltage electrical installations - Part 1: Caravans |
| EN 1870-12:2013 | Safety of woodworking machines - Circular sawing machines - Part 12: Pendulum cross-cut sawing machines |
| EN 14829:2007 | Independent gas-fired flueless space heaters for nominal heat input not exceeding 6 kW |
| EN 1870-10:2013 | Safety of woodworking machines - Circular sawing machines - Part 10: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines |
| EN 1643:2014 | Safety and control devices for gas burners and gas burning appliances - Valve proving systems for automatic shut-off valves |
| EN 13390:2002+A1:2009 | Food processing machinery - Pie and tart machines - Safety and hygiene requirements |
| EN 1012-2:1996+A1:2009 | Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps |
| EN 1777:2010 | Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing |
| EN 15650:2010 | Ventilation for buildings - Fire dampers |
| EN 1678:1998+A1:2010 | Food processing machinery - Vegetable cutting machines - Safety and hygiene requirements |
| EN 1028-1:2002+A1:2008 | Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 1: Classification - General and safety requirements |
| EN 15906:2011 | Winter maintenance equipment - Snow removal machines with rotating tools - Specification and clearing capacity |
| EN 1870-9:2012 | Safety of woodworking machines - Circular sawing machines - Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading |
| EN 16282-8:2017 | Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 8: Installations for treatment of aerosol; Requirements and testing |
| BS EN 474-1 : 2006 | EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 16252:2012 | MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - HORIZONTAL BALING PRESSES - SAFETY REQUIREMENTS |
| I.S. EN 45545-1:2013 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 1: GENERAL |
| PREN 50131-2-2 : DRAFT 2016 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-2: INTRUSION DETECTORS - PASSIVE INFRARED DETECTORS |
| EN 50123-7-3:2003 | Railway applications - Fixed installations - D.C. switchgear - Part 7-3: Measurement, control and protection devices for specific use in d.c. traction systems - Isolating voltage transducers and other voltage measuring devices |
| PREN 50539-11 : DRAFT 2010 | LOW-VOLTAGE SURGE PROTECTIVE DEVICES - SURGE PROTECTIVE DEVICES FOR SPECIFIC APPLICATION INCLUDING D.C. - PART 11: REQUIREMENTS AND TESTS FOR SPDS IN PHOTOVOLTAIC APPLICATIONS |
| PREN 50131-10 : DRAFT 2011 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 10: APPLICATION SPECIFIC REQUIREMENTS FOR SUPERVISED PREMISES TRANSCEIVER (SPT) |
| I.S. EN 15000:2008 | SAFETY OF INDUSTRIAL TRUCKS - SELF PROPELLED VARIABLE REACH TRUCKS - SPECIFICATION, PERFORMANCE AND TEST REQUIREMENTS FOR LONGITUDINAL LOAD MOMENT INDICATORS AND LONGITUDINAL LOAD MOMENT LIMITERS |
| I.S. EN 60079-19:2011 | EXPLOSIVE ATMOSPHERES - PART 19: EQUIPMENT REPAIR, OVERHAUL AND RECLAMATION |
| BS EN 13616-2:2016 | Overfill prevention devices for static tanks for liquid fuels Overfill prevention devices without a closure device |
| BS EN 61800-2:2015 | Adjustable speed electrical power drive systems General requirements. Rating specifications for low voltage adjustable speed a.c. power drive systems |
| BS EN 60846-1:2014 | Radiation protection instrumentation. Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation Portable workplace and environmental meters and monitors |
| 09/30211604 DC : 0 | BS EN 50541-1 - THREE PHASE DRY-TYPE DISTRIBUTION TRANSFORMERS 50 HZ, FROM 100 TO 3150 KVA, WITH HIGHEST VOLTAGE FOR EQUIPMENT NOT EXCEEDING 36 KV - PART 1: GENERAL REQUIREMENTS AND REQUIREMENTS FOR DRY TYPE TRANSFORMERS WITH HIGHEST VOLTAGE FOR EQUIPMENT NOT EXCEEDING 36 KV |
| BS EN 691-1:2012 | Safety of woodworking machines Common requirements |
| UNE-EN 50379-3:2013 | Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances - Part 3: Performance requirements for apparatus used in non-statutory servicing of gas fired heating appliances |
| BS EN 50110-1:2013 | Operation of electrical installations General requirements |
| PREN 12050-3 : DRAFT 2012 | WASTEWATER LIFTING PLANTS FOR BUILDINGS AND SITES - PART 3: LIFTING PLANTS FOR LIMITED APPLICATIONS |
| DIN EN 50014 : 2000 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - GENERAL REQUIREMENTS |
| DIN EN 15954-2:2013-11 | Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements |
| BS EN 50556:2011 | Road traffic signal systems |
| 05/30129951 DC : 0 | EN 15164 - MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR CHAIN AND BELT SLOTTING MACHINES |
| DD CLC/TS 50131-2-6:2004 | Alarm systems. Intrusion systems Requirements for opening contacts (magnetic) |
| 09/30199364 DC : 0 | BS EN 13463-5 - NON-ELECTRICAL EQUIPMENT INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 5: PROTECTION BY CONSTRUCTIONAL SAFETY 'C' |
| I.S. EN 50131-2-3:2008 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-3: REQUIREMENTS FOR MICROWAVE DETECTORS |
| BS EN 15949:2012 | Safety of machinery. Safety requirements for bar mills, structural steel mills and wire rod mills |
| 06/30127082 DC : 0 | EN 50486 - EQUIPMENT FOR USE IN AUDIO AND VIDEO DOOR - ENTRY SYSTEMS |
| 01/206090 DC : DRAFT OCT 2001 | EN 50107-2 - SIGNS AND LUMINOUS-DISCHARGE-TUBE INSTALLATIONS OPERATING FROM A NO-LOAD RATED OUTPUT VOLTAGE EXCEEDING 1 KV BUT NOT EXCEEDING 10 KV - PART 2: REQUIREMENTS FOR EARTH-LEAKAGE AND OPEN-CIRCUIT PROTECTIVE DEVICES |
| BS EN 61076-2-105:2008 | Connectors for electronic equipment. Product requirements Circular connectors. Detail specification for M5 connectors with screw-locking |
| DIN EN 691-1:2013-01 | SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS |
| UNE-EN 60079-15:2013 | Explosive atmospheres - Part 15: Equipment protection by type of protection "n" |
| CEI EN 61076-2-101 : 2013 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-101: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR M12 CONNECTORS WITH SCREW-LOCKING |
| DIN EN 1672-1:2014-12 | FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS |
| UNE-EN 50177:2010 | Stationary electrostatic application equipment for ignitable coating powders - Safety requirements |
| I.S. EN 61008-1:2012&A1:2014/ac&A2:2014...A12:2017 | RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITHOUT INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCCBS) - PART 1: GENERAL RULES |
| 09/30202602 DC : 0 | BS EN 50134-3 - ALARM SYSTEMS - SOCIAL ALARM SYSTEMS - PART 3: LOCAL UNIT AND CONTROLLER |
| I.S. EN 61995-1:2008 | DEVICES FOR THE CONNECTION OF LUMINAIRES FOR HOUSEHOLD AND SIMILAR PURPOSES - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 62026-2:2013 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 2: ACTUATOR SENSOR INTERFACE (AS-I) (IEC 62026-2:2008 (MOD)) |
| 08/30194466 DC : 0 | BS EN 1859 - CHIMNEYS - METAL CHIMNEYS - TEST METHODS |
| EN 62533:2016 | Radiation protection instrumentation - Highly sensitive hand-held instruments for photon detection of radioactive material |
| PREN 12693 : DRAFT 1996 | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - REFRIGERANT COMPRESSORS |
| BS EN 62282-3-1:2007 | Fuel cell technologies Stationary fuel cell power systems. Safety |
| 07/30172833 DC : DRAFT DEC 2007 | BS EN 15746-2 - RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED - EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| I.S. EN 1870-1:2007 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS |
| BS EN 62533:2016 | Radiation protection instrumentation. Highly sensitive hand-held instruments for photon detection of radioactive material |
| DIN EN 16716:2015-08 (Draft) | MOUNTAINEERING EQUIPMENT - AVALANCHE AIRBAG SYSTEMS - SAFETY REQUIREMENTS AND TEST METHODS |
| UNE-EN 15714-3:2010 | Industrial valves - Actuators - Part 3: Pneumatic part-turn actuators for industrial valves - Basic requirements |
| 04/30116868 DC : DRAFT JUL 2004 | EN 175301-803 - DETAIL SPECIFICATION - RECTANGULAR CONNECTORS - FLAT CONTACTS, 0,8 MM THICKNESS, LOCKING SCREW NOT DETACHABLE |
| BS EN 60998-1:2004 | Connecting devices for low-voltage circuits for household and similar purposes General requirements |
| BS EN 16500:2014 | Machines for compacting waste materials or recyclable fractions. Vertical baling presses. Safety requirements |
| I.S. EN 1870-13:2007 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES |
| UNE-EN 16314:2014 | Gas meters - Additional functionalities |
| EN 12098-3:2017 | Energy Performance of Buildings - Controls for heating systems - Part 3: Control equipment for electrical heating systems - Modules M3-5,6,7,8 |
| 09/30181712 DC : 0 | BS EN 12855:2003/A1 - FOOD PROCESSING MACHINERY - ROTATING BOWL CUTTERS - SAFETY AND HYGIENE REQUIREMENTS |
| CEI EN 62586-1 : 2016 | POWER QUALITY MEASUREMENT IN POWER SUPPLY SYSTEMS - PART 1: POWER QUALITY INSTRUMENTS (PQI) |
| BS EN 62310-3:2008 | Static transfer systems (STS) Method for specifying performance and test requirements |
| CEI EN 50131-2-7-3 : 2013 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-3: INTRUSION DETECTORS - GLASS BREAK DETECTORS (ACTIVE) |
| 11/30227089 DC : 0 | BS EN 1034-3 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 3: REREELERS AND WINDERS |
| 04/30122476 DC : 0 | EN 14492-1 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| EN 61851-22:2002 | Electric vehicle conductive charging system - Part 22: AC electric vehicle charging station |
| EN 60601-1-1:2001 | Medical electrical equipment - Part 1-1: General requirements for safety - Collateral standard: Safety requirements for medical electrical systems |
| BS EN 60598-1:2015 | Luminaires General requirements and tests |
| DIN EN 15420:2011-03 | GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT EXCEEDING 70 KW, BUT NOT EXCEEDING 1 000 KW |
| CLC/TR 50656:2016 | SPD application in conjunction with Class II equipment |
| BS EN 50216-12:2011 | Power transformer and reactor fittings Fans |
| PREN 15571 : DRAFT 2013 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES |
| 17/30347868 DC : 0 | BS EN 50411-4-1 - FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 4-1: PASSIVE OPTICAL STREET CABINET FOR CATEGORY A |
| I.S. EN 230:2005 | AUTOMATIC BURNER CONTROL SYSTEMS FOR OIL BURNERS |
| CEI EN 50131-3 : 2009 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 3: CONTROL AND INDICATING EQUIPMENT |
| CEI EN 60076-11 : 2006 | POWER TRANSFORMERS - PART 11: DRY-TYPE TRANSFORMERS |
| CEI EN 61076-3-117 : 2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-117: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR PROTECTIVE HOUSINGS FOR USE WITH 8-WAY SHIELDED AND UNSHIELDED CONNECTORS FOR INDUSTRIAL ENVIRONMENTS INCORPORATING THE IEC 60603-7 SERIES INTERFACE - VARIANT 14 RELATED TO IEC 61076-3-106 - PUSH PULL COUPLING |
| CEI EN 62752 : 1ED 2017 | IN-CABLE CONTROL AND PROTECTION DEVICE FOR MODE 2 CHARGING OF ELECTRIC ROAD VEHICLES (IC-CPD) |
| VDE 0830-8-2-1 : 2001 | ALARM SYSTEMS - ACCESS CONTROL SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 2-1: GENERAL REQUIREMENTS FOR COMPONENTS |
| BS EN 61557-12:2008 | Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures Performance measuring and monitoring devices (PMD) |
| 09/30202538 DC : DRAFT JUN 2009 | BS EN 15955-2 - RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| 03/112610 DC : DRAFT AUG 2003 | EN 14710-1 - FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITHOUT PRIMER - PART 1: CLASSIFICATION - GENERAL AND SAFETY |
| I.S. EN 12845:2015 | FIXED FIREFIGHTING SYSTEMS - AUTOMATIC SPRINKLER SYSTEMS - DESIGN, INSTALLATION AND MAINTENANCE |
| PREN 13289 : DRAFT 2015 | PASTA PROCESSING PLANT - DRYERS AND COOLERS - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 50369:2005 | Liquid tight sheathing systems for cable management |
| EN 62020:1998/A1:2005 | ELECTRICAL ACCESSORIES - RESIDUAL CURRENT MONITORS FOR HOUSEHOLD AND SIMILAR USES (RCMS) |
| 12/30260496 DC : 0 | BS EN 12750 - SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES |
| 03/114562 DC : DRAFT SEP 2003 | BS EN ISO 18777 - TRANSPORTABLE LIQUID OXYGEN SYSTEMS FOR MEDICAL USE - PARTICULAR REQUIREMENTS |
| BS EN 50132-4-1:2001 | Alarm systems. CCTV surveillance systems for use in security applications Black and white monitors |
| 10/30219378 DC : 0 | BS EN 15609 - LPG EQUIPMENT AND ACCESSORIES - LPG PROPULSION SYSTEMS FOR BOATS, YACHTS AND OTHER CRAFT - INSTALLATION REQUIREMENTS |
| 13/30251579 DC : 0 | BS EN 50617-1 - RAILWAYS APPLICATIONS - BASIC PARAMETERS OF TRAIN DETECTION SYSTEMS - PART 1: TRACK CIRCUITS |
| UNE-EN 14154-4:2015 | Water meters - Part 4: Additional functionalities |
| 03/112612 DC : DRAFT AUG 2003 | EN 14710-2 - FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITHOUT PRIMER - PART 2: VERIFICATION OF GENERAL AND SAFETY REQUIREMENTS |
| BS EN 15861:2012 | Food processing machinery. Smokehouses. Safety and hygienerequirements |
| 05/30099723 DC : DRAFT AUG 2005 | EN 12352 - TRAFFIC CONTROL EQUIPMENT - WARNING AND SAFETY LIGHT DEVICES |
| BS EN 50178:1998 | Electronic equipment for use in power installations |
| BS EN 15500-1:2017 | Energy Performance of Buildings. Control for heating, ventilating and air conditioning applications Electronic individual zone control equipment. Modules M3-5, M4-5, M5-5 |
| I.S. EN 12042:2014 | FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS |
| 11/30246174 DC : 0 | BS EN 16304 - VENT VALVES |
| I.S. EN 62484:2015 | RADIATION PROTECTION INSTRUMENTATION - SPECTROSCOPY-BASED PORTAL MONITORS USED FOR THE DETECTION AND IDENTIFICATION OF ILLICIT TRAFFICKING OF RADIOACTIVE MATERIAL |
| 09/30180832 DC : DRAFT AUG 2009 | BS EN 13675 AMD1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR TUBE FORMING AND ROLLING MILLS AND FINISHING LINE EQUIPMENT |
| EN 62271-100 : 2009 AMD 2/COR 18 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 100: ALTERNATING-CURRENT CIRCUIT-BREAKERS (IEC 62271-100:2008/A2:2017/COR1:2018) |
| UNE-EN 50130-5:2011 | Alarm systems - Part 5: Environmental test methods |
| 07/30161919 DC : 0 | EN 940 - SAFETY OF WOODWORKING MACHINES - COMBINED WOODWORKING MACHINES |
| DIN EN 50298 : 1999 | EMPTY ENCLOSURES FOR LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - GENERAL REQUIREMENTS |
| BS EN 61020-1:2009 | Electromechanical switches for use in electrical and electronic equipment Generic specification |
| BS EN 15165:2014 | Food processing machinery. Forming machines. Safety and hygiene requirements |
| UNE-EN 61020-1:2011 | Electromechanical switches for use in electrical and electronic equipment - Part 1: Generic specification |
| 12/30261641 DC : 0 | BS EN 12043 - FOOD PROCESSING MACHINERY - INTERMEDIATE PROVERS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 1648-2:2018 | LEISURE ACCOMMODATION VEHICLES - 12 V DIRECT CURRENT EXTRA LOW VOLTAGE ELECTRICAL INSTALLATIONS - PART 2: MOTOR CARAVANS |
| BS EN 62618:2016 | Radiation protection instrumentation. Spectroscopy-based alarming Personal Radiation Detectors (SPRD) for the detection of illicit trafficking of radioactive material |
| I.S. EN 50463-1:2017 | RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 1: GENERAL |
| 03/301332 DC : DRAFT JAN 2003 | ISO 12649 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR BINDING AND FINISHING SYSTEMS AND EQUIPMENT |
| 13/30257309 DC : 0 | BS EN 1459-2 - ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SLEWING VARIABLE-REACH TRUCKS |
| CEI EN 62820-1-1 : 1ED 2017 | BUILDING INTERCOM SYSTEMS - PART 1-1: SYSTEM REQUIREMENTS - GENERAL |
| UNE-EN 50483-4:2013 | Test requirements for low voltage aerial bundled cable accessories -- Part 4: Connectors |
| I.S. EN 81-43:2009 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 43: LIFTS FOR CRANES |
| HD 60269-3-1:2004 | Low-voltage fuses - Part 3-1: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications) - Sections I to IV: Examples of types of standardized fuses |
| 04/30105620 DC : DRAFT OCT 2004 | EN 54-21 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 21: ALARM TRANSMISSION AND FAULT WARNING ROUTING EQUIPMENT |
| BS EN 62689-1:2016 | Current and voltage sensors or detectors, to be used for fault passage indication purposes General principles and requirements |
| CEI CLC/TS 50131-11 : 2013 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 11: HOLD-UP DEVICES |
| 03/307802 DC : DRAFT MAY 2003 | EN 61008-1 - RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITHOUT INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCCB'S) - PART 1: GENERAL RULES |
| 11/30249911 DC : 0 | BS EN 50465 - GAS APPLIANCES - COMBINED HEAT AND POWER APPLIANCE OF NOMINAL HEAT INPUT INFERIOR OR EQUAL TO 70 KW |
| BS EN 16704-2-1:2016 | Railway applications. Track. Safety protection on the track during work Common solutions and technologies. Technical requirements for Track Warning Systems (TWS) |
| I.S. EN 15774:2010 | FOOD PROCESSING MACHINERY - MACHINES FOR PROCESSING FRESH AND FILLED PASTA (TAGLIATELLE, CANNELLONI, RAVIOLI, TORTELLINI, ORECCHIETTE AND GNOCCHI) - SAFETY AND HYGIENE REQUIREMENTS |
| PREN 50125-1 : DRAFT 2012 | RAILWAY APPLICATIONS - ENVIRONMENTAL CONDITIONS FOR EQUIPMENT - PART 1: EQUIPMENT ON BOARD ROLLING STOCK |
| CLC/TS 50083-2-3:2018 | Cable networks for television signals, sound Signals and interactive services - Part 2-3: LTE (4G) Interference Mitigation Filters |
| 10/30234293 DC : 0 | BS EN 12110 - TUNNELLING MACHINES - AIR LOCKS - SAFETY REQUIREMENTS |
| DIN EN 16327:2014-07 | FIRE-FIGHTING - POSITIVE-PRESSURE PROPORTIONING SYSTEMS (PPPS) AND COMPRESSED-AIR FOAM SYSTEMS (CAFS) |
| UNE-EN 16704-2-1:2017 | Railway applications - Track - Safety protection on the track during work - Part 2-1: Common solutions and technologies - Technical requirements for Track Warning Systems (TWS) |
| 17/30296747 DC : 0 | BS EN 15650 - VENTILATION FOR BUILDINGS - FIRE DAMPERS |
| BS EN 50172:2004 | Emergency escape lighting systems |
| CEI EN 50050-3 : 2014 | ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 3: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE FLOCK |
| I.S. EN 50556:2011 | ROAD TRAFFIC SIGNAL SYSTEMS |
| DIN EN 15650:2010-09 | Ventilation for buildings - Fire dampers |
| BS EN 50194-1:2009 | Electrical apparatus for the detection of combustible gases in domestic premises Test methods and performance requirements |
| 14/30258503 DC : 0 | BS EN 14033-3 - RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS |
| EN 15595:2009+A1:2011 | Railway applications - Braking - Wheel slide protection |
| BS EN 50091-1-1:1997 | Uninterruptible power systems (UPS) General and safety requirements for UPS used in operator access areas |
| I.S. EN 16839:2017 | RAILWAY APPLICATIONS - ROLLING STOCK - HEAD STOCK LAYOUT |
| BS EN 50411-3-5:2015 | Fibre organisers and closures to be used in optical fibre communication systems. Product specifications Wall outlet |
| BS EN 1870-6:2017 | Safety of woodworking machines. Circular sawing machines Circular sawing machines for fire wood |
| BS EN 50516-1-1:2011 | Industrial connector sets and interconnect components to be used in optical fibre control and communication systems. Product specifications Type SC-RJ PC industrial terminated on EN 60793-2-10 category A1a and A1b multimode fibre to meet the requirements of category I (industrial environments) as specified in IEC 61753-1-3 |
| BS EN 60598-2-14:2009 | Luminaires Particular requirements. Luminaires for cold cathode tubular discharge lamps (neon tubes) and similar equipment |
| DIN EN 14033-3:2014-08 (Draft) | RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS |
| BS EN 1570-1 : 2011 | SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 1: LIFTING TABLES SERVING UP TO TWO FIXED LANDINGS |
| BS EN 415-10:2014 | Safety of packaging machines General Requirements |
| UNE-EN 1870-18:2013 | Safety of woodworking machines - Circular sawing machines - Part 18: Dimension saws |
| 98/717506 DC : DRAFT DEC 1998 | PREN 13389 - FOOD PROCESSING MACHINERY - MIXERS WITH HORIZONTAL SHAFTS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 61287-1:2014 | RAILWAY APPLICATIONS - POWER CONVERTERS INSTALLED ON BOARD ROLLING STOCK - PART 1: CHARACTERISTICS AND TEST METHODS |
| S.R. CLC/TS 50537-4:2010 | RAILWAY APPLICATIONS - MOUNTED PARTS OF THE TRACTION TRANSFORMER AND COOLING SYSTEM - PART 4: GAS AND LIQUID ACTUATED (BUCHHOLZ) RELAY FOR LIQUID IMMERSED TRANSFORMERS AND REACTORS WITH CONSERVATOR FOR RAIL VEHICLES |
| I.S. EN 15714-4:2009 | INDUSTRIAL VALVES - ACTUATORS - PART 4: HYDRAULIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| I.S. HD 630.3.1:2003 | LOW-VOLTAGE FUSES - PART 3-1: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY UNSKILLED PERSONS (FUSES MAINLY FOR HOUSEHOLD AND SIMILAR APPLICATIONS) - SECTIONS 1 TO 4 |
| 11/30235383 DC : 0 | BS EN 12098-1 - CONTROLS FOR HEATING SYSTEMS - PART 1: CONTROL EQUIPMENT FOR HOT WATER HEATING SYSTEMS |
| DIN EN 50192 : 1996 | ARC WELDING EQUIPMENT - PLASMA CUTTING SYSTEMS FOR MANUAL USE |
| BS ISO 19202-1:2017 | Summer toboggan runs Safety requirements and test methods |
| I.S. EN 50131-10:2014 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 10: APPLICATION SPECIFIC REQUIREMENTS FOR SUPERVISED PREMISES TRANSCEIVER (SPT) |
| BS EN 15859:2010 | Air quality. Certification of automated dust arrestment plant monitors for use on stationary sources. Performance criteria and test procedures |
| I.S. EN 50470-1:2006 | ELECTRICITY METERING EQUIPMENT (A.C.) - PART 1: GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - METERING EQUIPMENT (CLASS INDEXES A, B AND C) |
| UNE-EN 15571:2015 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for surface finishing machines |
| BS EN 61557-16:2015 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring or monitoring of protective measures Equipment for testing the effectiveness of the protective measures of electrical equipment and/or medical electrical equipment |
| CEI EN 50274 : 2002 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PROTECTION AGAINST ELECTRIC SHOCK PROTECTION AGAINST UNINTENTIONAL DIRECT CONTACT WITH HAZARDOUS LIVE PARTS |
| PREN 50617-2 : DRAFT 2013 | RAILWAYS APPLICATIONS - BASIC PARAMETERS OF TRAIN DETECTION SYSTEMS - PART 2: AXLE COUNTERS |
| BS EN 60974-11:2010 | Arc welding equipment Electrode holders |
| 05/30141113 DC : 0 | EN 50463 - RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS |
| DIN EN 15859:2010-08 | Air Quality - Certification of automated dust arrestment plant monitors for use on stationary sources - Performance criteria and test procedures |
| I.S. EN 50050-1:2013 | ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 1: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE LIQUID COATING MATERIALS |
| BS EN 61095:1993 | Specification for electromechanical contactors for household and similar purposes |
| BS EN 62271-201:2014 | High-voltage switchgear and controlgear AC solid-insulation enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV |
| 16/30339195 DC | BS EN 81-41. Safety rules for the construction and installation of lifts. Special lifts for the transport of persons and goods. Part 41. Vertical lifting platforms intended for use by persons with impaired mobility |
| 14/30299146 DC : 0 | BS EN 16743 - FOOD PROCESSING MACHINERY - AUTOMATIC INDUSTRIAL SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN 16314:2013-09 | GAS METERS - ADDITIONAL FUNCTIONALITIES |
| BS EN 15001-1:2009 | Gas infrastructure. Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations Detailed functional requirements for design, materials, construction, inspection and testing |
| UNI CEI CEN/TS 45545-4 : 2009 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 4: FIRE SAFETY REQUIREMENTS FOR RAILWAY ROLLING STOCK DESIGN |
| DIN EN 415-8:2011-06 | Safety of packaging machines - Part 8: Strapping machines; German version EN 415-8:2008 |
| DIN EN 12405-2:2012-10 | GAS METERS - CONVERSION DEVICES - PART 2: ENERGY CONVERSION |
| BS EN 50467:2011 | Railway applications. Rolling stock. Electrical connectors, requirements and test methods |
| 06/30145537 DC : 0 | EN 50436-2 - ALCOHOL INTERLOCKS - TEST METHODS AND PERFORMANCE REQUIREMENTS - PART 2: INSTRUMENTS FOR GENERAL PREVENTIVE USE |
| 04/30123974 DC : DRAFT OCT 2004 | EN 50446 - STRAIGHT THERMOCOUPLE ASSEMBLY WITH METAL OR CERAMIC PROTECTION TUBE AND ACCESSORIES |
| I.S. EN 12417:2001 | MACHINE TOOLS - SAFETY - MACHINING CENTRES |
| UNI EN 15500 : 2008 | CONTROL FOR HEATING, VENTILATING AND AIR-CONDITIONING APPLICATIONS - ELECTRONIC INDIVIDUAL ZONE CONTROL EQUIPMENT |
| 14/30303744 DC : 0 | BS EN 16282-2 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION OF COMMERCIAL KITCHENS - PART 2: KITCHEN VENTILATION HOODS; DESIGN AND SAFETY REQUIREMENTS |
| BS EN 50284:1999 | Special requirements for construction, test and marking of electrical apparatus of equipment group II, category 1 G |
| CEI EN 50131-2-2 : 2008 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-2: INTRUSION DETECTORS - PASSIVE INFRARED DETECTORS |
| DD CLC/TS 50131-3:2003 | Alarm systems. Intrusion systems Control and indicating equipment |
| I.S. EN 50628:2016 | ERECTION OF ELECTRICAL INSTALLATIONS IN UNDERGROUND MINES |
| 98/103738 DC : DRAFT APR 1998 | PREN 12899-2 - ROAD EQUIPMENT - FIXED, VERTICAL ROAD SIGNS - PART 2: TRANSILLUMINATED TRAFFIC BOLLARDS |
| BS EN 50136-2:2013 | Alarm systems. Alarm transmission systems and equipment Requirements for Supervised Premises Transceiver (SPT) |
| 10/30232464 DC : 0 | BS EN 12480 - GAS METERS - ROTARY DISPLACEMENT GAS METERS |
| BS EN 50124-1:2017 | Railway applications. Insulation coordination Basic requirements. Clearances and creepage distances for all electrical and electronic equipment |
| DIN EN 16479:2014-09 | WATER QUALITY - PERFORMANCE REQUIREMENTS AND CONFORMITY TEST PROCEDURES FOR WATER MONITORING EQUIPMENT - AUTOMATED SAMPLING DEVICES (SAMPLERS) FOR WATER AND WASTE WATER |
| BS EN 16282-2:2016 | Equipment for commercial kitchens. Components for ventilation in commercial kitchens Kitchen ventilation hoods; design and safety requirements |
| BS EN 60598-2-20:2015 | Luminaires Particular requirements. Lighting chains |
| 17/30356728 DC : 0 | BS EN 12261 - GAS METERS - TURBINE GAS METERS |
| UNE-EN 13616-2:2016 | Overfill prevention devices for static tanks for liquid fuels - Part 2: Overfill prevention devices without a closure device |
| BS EN 16009:2011 | Flameless explosion venting devices |
| 12/30265295 DC : 0 | BS EN 12050-3 - WASTEWATER LIFTING PLANTS FOR BUILDINGS AND SITES - PRINCIPLES OF CONSTRUCTION AND TESTING - PART 3: LIFTING PLANTS FOR LIMITED APPLICATIONS |
| UNE-EN 16840:2017 | Inland navigation vessels - Electrical shore connection, three-phase current 400 V, 50 Hz, at least 250 A |
| I.S. EN 13060:2014 | SMALL STEAM STERILIZERS |
| 04/30113996 DC : 0 | PREN 81-41 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 41: VERTICAL LIFTING PLATFORMS INTENDED FOR USE BY PERSONS WITH IMPAIRED MOBILITY |
| 13/30281716 DC : 0 | BS EN 50299-2 - OIL-IMMERSED CABLE CONNECTION ASSEMBLIES FOR TRANSFORMERS AND REACTORS HAVING HIGHEST VOLTAGE FOR EQUIPMENT U[M] FROM 72,5 KV TO 550 KV - PART 2: DRY-TYPE CABLE TERMINATIONS |
| UNE-EN 60598-2-20:2015 | Luminaires - Part 2-20: Particular requirements - Lighting chains |
| 07/30169926 DC : DRAFT AUG 2007 | BS EN 50490 - ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - TECHNICAL REQUIREMENTS FOR AERONAUTICAL GROUND LIGHTING CONTROL AND MONITORING SYSTEMS - UNITS FOR SELECTIVE SWITCHING AND MONITORING OF INDIVIDUAL LAMPS |
| I.S. HD 384.7.702:2002 | ELECTRICAL INSTALLATIONS OF BUILDINGS - REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - SWIMMING POOLS AND OTHER BASINS |
| BS EN 61076-2-113:2017 | Connectors for electronic equipment. Product requirements Circular connectors. Detail specification for connectors with M12 screw locking with power and signal contacts for data transmission with frequency up to 100 MHz |
| BS EN 61076-2-104:2014 | Connectors for electronic equipment. Product requirements Circular connectors. Detail specification for circular connectors with M8 screw-locking or snap-locking |
| 13/30278752 DC : 0 | BS EN 12309-2 - GAS-FIRED SORPTION APPLIANCES FOR HEATING AND/OR COOLING WITH A NET HEAT INPUT NOT EXCEEDING 70 KW - PART 2: SAFETY |
| I.S. EN 61439-1:2011 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES (IEC 61439-1:2011) |
| CEI EN 50131-2-5 : 2009 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-5: REQUIREMENTS FOR COMBINED PASSIVE INFRARED AND ULTRASONIC DETECTORS |
| 10/30218152 DC : 0 | BS EN 50539-11 - LOW-VOLTAGE SURGE PROTECTIVE DEVICES - SURGE PROTECTIVE DEVICES FOR SPECIFIC APPLICATION INCLUDING D.C. - PART 11: REQUIREMENTS AND TESTS FOR SPDS IN PHOTOVOLTAIC APPLICATIONS |
| CEI R205-002 : 1997 | HOME AND BUILDING ELECTRONIC SYSTEMS - TECHNICAL REPORT 2: GUIDELINES FOR THE PROFESSIONAL INSTALLATION OF TWISTED PAIR CABLES CLASS 1 |
| BS EN 62020:1999 | Electrical accessories. Residual current monitors for household and similar uses (RCMs) |
| CEI EN 175301-803 : 2007 | DETAIL SPECIFICATION: RECTANGULAR CONNECTORS - FLAT CONTACTS, 0,8 MM THICKNESS, LOCKING SCREW NOT DETACHABLE |
| 07/30162638 DC : 0 | BS 50131-2-3 - ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-3: REQUIREMENTS FOR MICROWAVE DETECTORS |
| 08/30180969 DC : DRAFT APR 2008 | BS EN 1570 - SAFETY REQUIREMENTS FOR LIFTING TABLES |
| 00/706812 DC : DRAFT MAR 2000 | BS EN 13871 - FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 50066:1993 | Specification for mini-couplers for the interconnection of electrical mains supplied equipment in road vehicles |
| PREN 13463-5 : DRAFT 2009 | NON-ELECTRICAL EQUIPMENT INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 5: PROTECTION BY CONSTRUCTIONAL SAFETY 'C' |
| CEI EN 62327 : 2012 | RADIATION PROTECTION INSTRUMENTATION - HAND-HELD INSTRUMENTS FOR THE DETECTION AND IDENTIFICATION OF RADIONUCLIDES AND FOR THE INDICATION OF AMBIENT DOSE EQUIVALENT RATE FROM PHOTON RADIATION |
| 93/209659 DC : DRAFT SEP 1993 | EN 50124-1 INSULATION COORDINATION - PART 1 - BASIC REQUIREMENTS - CLEARANCE & CREEPAGES (CLC/TC9X/ WG6/13 APRIL 1993) |
| 00/717064 DC : DRAFT NOV 2000 | PREN 14070 - SAFETY OF MACHINES TOOLS - TRANSFER AND SPECIAL PURPOSE MACHINES |
| 05/30135286 DC : 0 | EN 15268 - PETROL FILLING STATIONS - SAFETY REQUIREMENTS FOR THE CONSTRUCTION AND PERFORMANCE OF SUBMERSIBLE PUMP ASSEMBLIES |
| BS EN 61557-1:2007 | Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures General requirements |
| BS 7987(2001) : 2001 | ROAD TRAFFIC SIGNAL SYSTEMS |
| BS EN 12098-3:2013 | Controls for heating systems Control equipment for electrical heating systems |
| BS EN 62271-204:2011 | High-voltage switchgear and controlgear Rigid gas-insulated transmission lines for rated voltage above 52 kV |
| PD CLC/TS 50131-2-11:2017 | PD CLC/TS 50131-2-11 Alarm systems - Intrusion and hold-up systems Part 2-11: Intrusion detectors - ALDDR |
| BS EN 61643-11 : 2012 | LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 11: SURGE PROTECTIVE DEVICES CONNECTED TO LOW-VOLTAGE POWER SYSTEMS - REQUIREMENTS AND TEST METHODS |
| 07/30163039 DC : DRAFT AUG 2007 | BS EN 1020 - NON-DOMESTIC FORCED CONVECTION GAS-FIRED AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW INCORPORATING A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR OR COMBUSTION PRODUCTS |
| 14/30297213 DC : 0 | BS EN 1473 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS |
| BS EN 50125-2:2002 | Railway applications. Environmental conditions for equipment Fixed electrical installations |
| BS EN 50017:1998 | Electrical apparatus for potentially explosive atmospheres. Powder filling \'q\' |
| BS EN 12098-5:2017 | Energy Performance of Buildings. Controls for heating systems Start-stop schedulers for heating systems. Modules M3-5,6,7,8 |
| 11/30244213 DC : 0 | BS EN 16282-8 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 8: INSTALLATIONS FOR TREATMENT OF COOKING FUMES - REQUIREMENTS AND TESTING |
| BS EN 50483-4:2009 | Test requirements for low voltage aerial bundled cable accessories Connectors |
| 06/30156491 DC : 0 | BS EN 15571 - MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONES - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES |
| 02/203343 DC : DRAFT FEB 2002 | PREN 50379-3 - SPECIFICATION FOR PORTABLE ELECTRICAL APPARATUS DESIGNED TO MEASURE COMBUSTION FLUE GAS PARAMETERS OF HEATING APPLIANCES - PART 3: PERFORMANCE REQUIREMENTS FOR APPARATUS USED IN NON-STATUTORY SERVICING OF GAS FIRED HEATING APPLIANCES |
| 09/30181772 DC : 0 | BS EN 1837:1999/A1 - SAFETY OF MACHINERY - INTEGRAL LIGHTING OF MACHINES |
| 11/30237915 DC : 0 | BS EN 14597 - TEMPERATURE CONTROL DEVICES AND TEMPERATURE LIMITERS FOR HEAT GENERATING SYSTEMS |
| PREN 50556 : DRAFT 2010 | ROAD TRAFFIC SIGNAL SYSTEMS |
| 97/700630 DC : DRAFT JAN 1997 | PREN 12693 - REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - REFRIGERANT COMPRESSORS |
| BS EN 50065-4-2:2002 | Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz and 1,6 MHz to 30 MHz. Low voltage decoupling filters Safety requirements |
| 06/30147145 DC : 0 | EN 1570 - SAFETY REQUIREMENTS FOR LIFTING TABLES |
| PRHD 62640 : DRAFT 2014 | RESIDUAL CURRENT DEVICES WITH OR WITHOUT OVERCURRENT PROTECTION FOR SOCKET-OUTLETS FOR HOUSEHOLD AND SIMILAR USES (IEC 62640:2011, MODIFIED) |
| 05/19981949 DC : DRAFT MAY 2005 | BS EN 1034-14 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 14: REEL SPLICERS |
| 08/30183804 DC : DRAFT JUNE 2008 | BS EN 50206-2 - RAILWAY APPLICATIONS - ROLLING STOCK - PANTOGRAPHS - CHARACTERISTICS AND TESTS - PART 2: PANTOGRAPHS FOR METROS AND LIGHT RAIL VEHICLES |
| UNE-EN 62561-6:2012 | Lightning protection system components (LPSC) - Part 6: Requirements for lightning strike counters (LSC) |
| PREN 15595 : DRAFT 2015 | RAILWAY APPLICATIONS - BRAKING - WHEEL SLIDE PROTECTION |
| BS EN 50134-3:2012 | Alarm systems. Social alarm systems Local unit and controller |
| PREN 12261 : DRAFT 2017 | GAS METERS - TURBINE GAS METERS |
| CEI EN 50446 : 2007 | STRAIGHT THERMOCOUPLE ASSEMBLY WITH METAL OR CERAMIC PROTECTION TUBE AND ACCESSORIES |
| BS EN 50191:2010 | Erection and operation of electrical test equipment |
| 05/30133339 DC : DRAFT MAY 2005 | EN 861 - SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES |
| PREN 16282-2 : DRAFT 2014 | EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION OF COMMERCIAL KITCHENS - PART 2: KITCHEN VENTILATION HOODS; DESIGN AND SAFETY REQUIREMENTS |
| 96/108461 DC : 0 | PREN 12649 - CONCRETE COMPACTORS AND FLOATING MACHINES - SAFETY REQUIREMENTS |
| UNE-EN 62683:2016 | Low-voltage switchgear and controlgear - Product data and properties for information exchange |
| I.S. EN 1459-1:2017 | ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 1: VARIABLE-REACH TRUCKS |
| NF EN 15650 : 2010 | VENTILATION FOR BUILDINGS - FIRE DAMPERS |
| I.S. EN 62477-1:2012 | SAFETY REQUIREMENTS FOR POWER ELECTRONIC CONVERTER SYSTEMS AND EQUIPMENT - PART 1: GENERAL |
| 03/306642 DC : DRAFT APR 2003 | EN 230 - AUTOMATIC BURNER CONTROL SYSTEMS FOR OIL BURNERS |
| UNE-EN 12405-2:2013 | Gas meters - Conversion devices - Part 2: Energy conversion |
| 07/30162640 DC : 0 | BS EN 50131-2-4 - ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-4: REQUIREMENTS FOR COMBINED PASSIVE INFRA-RED AND MICROWAVE DETECTORS |
| BS EN 60127-6:2014 | Miniature fuses Fuse-holders for miniature fuse-links |
| 00/541592 DC : DRAFT NOV 2000 | BS EN 13463-5 - NON-ELECTRICAL EQUIPMENT INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 5: PROTECTION BY CONSTRUCTIONAL SAFETY |
| I.S. EN 12098-3:2017 | ENERGY PERFORMANCE OF BUILDINGS - CONTROLS FOR HEATING SYSTEMS - PART 3: CONTROL EQUIPMENT FOR ELECTRICAL HEATING SYSTEMS - MODULES M3-5, 6, 7, 8 |
| 06/30139641 DC : 0 | EN 777-3 - MULTI-BURNER GAS-FORED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON DOMESTIC USE - PART 3: SYSTEM F - SAFETY |
| 08/30156922 DC : 0 | BS EN 15220-2 - RAILWAY APPLICATIONS - BRAKE INDICATORS - PART 2: ELECTRICALOPERATION BRAKE INDICATORS |
| UNE-EN 50131-4:2010 | Alarm systems - Intrusion and hold-up systems - Part 4: Warning devices |
| UNE-EN 15714-2:2010 | Industrial valves - Actuators - Part 2: Electric actuators for industrial valves - Basic requirements |
| BS EN 60146-1-1:2010 | Semiconductor converters. General requirements and line commutated converters Specification of basic requirements |
| 02/705139 DC : DRAFT APR 2002 | PREN 1870-16 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V-CUTTING |
| 07/30162643 DC : DRAFT AUG 2007 | BS EN 50131-2-5 - ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-5: REQUIREMENTS FOR COMBINED PASSIVE INFRARED AND ULTRASONIC DETECTORS |
| HD 60364-7-721:2009/corrigendum:2010 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-721: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - ELECTRICAL INSTALLATIONS IN CARAVANS AND MOTOR CARAVANS |
| S.R. CLC TR 50488:2007 | RAILWAY APPLICATIONS - SAFETY MEASURES FOR THE PERSONNEL WORKING ON OR NEAR OVERHEAD CONTACT LINES |
| DIN EN 16009:2011-10 | Flameless explosion venting devices |
| 04/30113842 DC : DRAFT MAY 2004 | PREN 14957 - FOOD PROCESSING MACHINERY - DISHWASHING MACHINES WITH CONVEYOR - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 60670-1:2005 | BOXES AND ENCLOSURES FOR ELECTRICAL ACCESSORIES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS (IEC 60670-1:2002 (MOD) + CORRIGENDUM FEB. 2003 (EQV)) |
| BS EN 60077-3:2002 | Railway applications. Electric equipment for rolling stock Electrotechnical components. Rules for d.c. circuit-breakers |
| DIN EN 13637:2015-12 | BUILDING HARDWARE - ELECTRICALLY CONTROLLED EXIT SYSTEMS FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| DIN EN 50018 : 2001 AMD 1 2003 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - FLAMEPROOF ENCLOSURE "D" |
| I.S. EN 81-71:2005 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PARTICULAR APPLICATIONS TO PASSENGER LIFTS AND GOODS PASSENGER LIFTS - PART 71: VANDAL RESISTANT LIFTS |
| CLC/TS 50131-2-4:2004 | Alarm systems - Intrusion systems - Part 2-4: Requirements for combined passive infrared and microwave detectors |
| DIN EN 1010-5:2005-10 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 5: Machines for the production of corrugated board and machines for the conversion of flat and corrugated board |
| DIN EN 15714-2:2010-02 | Industrial valves - Actuators - Part 2: Electric actuators for industrial valves - Basic requirements |
| CEI EN 50130-5 : 2012 | ALARM SYSTEMS - PART 5: ENVIRONMENTAL TEST METHODS |
| DIN EN 16678:2016-02 | Safety and control devices for gas burners and gas burning appliances - Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa |
| UNI EN 16314 : 2013 | GAS METERS - ADDITIONAL FUNCTIONALITIES |
| NF EN 12649 : 2008 + A1 2011 | CONCRETE COMPACTORS AND SMOOTHING MACHINES - SAFETY |
| I.S. EN 50050-3:2013 | ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 3: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE FLOCK |
| EN 60974-11:2010 | ARC WELDING EQUIPMENT - PART 11: ELECTRODE HOLDERS |
| I.S. EN 50291-2:2010 | ELECTRICAL APPARATUS FOR THE DETECTION OF CARBON MONOXIDE IN DOMESTIC PREMISES - PART 2: ELECTRICAL APPARATUS FOR CONTINUOUS OPERATION IN A FIXED INSTALLATION IN RECREATIONAL VEHICLES AND SIMILAR PREMISES INCLUDING RECREATIONAL CRAFT - ADDITIONAL TEST METHODS AND PERFORMANCE REQUIREMENTS |
| I.S. EN 60601-1-11:2015 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-11: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS USED IN THE HOME HEALTHCARE ENVIRONMENT |
| PREN 15502-1 : DRAFT 2010 | GAS-FIRED HEATING BOILERS - PART 1: GENERAL REQUIREMENTS AND TESTS |
| CEI EN 60728-11 : 2014 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 11: SAFETY |
| PREN 54-3 : DRAFT 2009 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 3: FIRE ALARM DEVICES - SOUNDERS |
| PD CLC/TS 50131-2-10:2014 | Alarm systems. Intrusion and hold-up systems Intrusion detectors. Lock state contacts (magnetic) |
| PREN 50131-4 : DRAFT 2017 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 4: WARNING DEVICES |
| CEI EN 61869-1 : 2010 | INSTRUMENT TRANSFORMERS - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 81-31:2010 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF GOODS ONLY - PART 31: ACCESSIBLE GOODS ONLY LIFTS |
| UNE-EN 15869-3:2011 | Inland navigation vessels - Electrical shore connection, three phase current 400 V, up to 63 A, 50 Hz - Part 3: On-board unit, safety requirements |
| OVE/ONORM EN 50131-2-2 : 2008 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-2: INTRUSION DETECTORS - PASSIVE INFRARED DETECTORS |
| I.S. EN 50411-2-5:2009 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-5: SEALED CLOSURES FOR AIR BLOWN FIBRE MICRODUCT, TYPE 1, FOR CATEGORY S & A |
| CEI EN 175301-801 : 2007 | DETAIL SPECIFICATION: HIGH DENSITY RECTANGULAR CONNECTORS, ROUND REMOVABLE CRIMP CONTACTS |
| UNE-EN 16252:2013 | Machines for compacting waste materials or recyclable fractions - Horizontal baling presses - Safety requirements |
| BS EN 50123-7-2:2003 | Railway applications. Fixed installations. d.c. switchgear. Measurement, control and protection devices for specific use in d.c. traction systems Isolating current transducers and other current measuring devices |
| I.S. EN 60598-1:2015 | LUMINAIRES - PART 1: GENERAL REQUIREMENTS AND TESTS |
| I.S. EN 1807-1:2013 | SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 1: TABLE BAND SAWS AND BAND RE-SAWS |
| UNI EN 16340 : 2014 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - COMBUSTION PRODUCT SENSING DEVICES |
| EN 60335-2-73 : 2003 AMD 2 2009 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-73: PARTICULAR REQUIREMENTS FOR FIXED IMMERSION HEATERS |
| PREN 50066 : DRAFT 2015 | MINI-COUPLERS FOR THE INTERCONNECTION OF ELECTRICAL MAINS SUPPLIED EQUIPMENT IN ROAD VEHICLES |
| NF EN 15869-3 : 2010 | INLAND NAVIGATION VESSELS - ELECTRICAL SHORE CONNECTION THREE PHASE CURRENT 400 V, UP TO 63 A, 50 HZ - PART 3: ON-BOARD UNIT, SAFETY REQUIREMENTS |
| I.S. EN 60269-1:2007 | LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 12261:2002 | GAS METERS - TURBINE GAS METERS |
| 18/30369304 DC : DRAFT APR 2018 | BS EN 1473 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS |
| I.S. EN 1501-3:2008 | REFUSE COLLECTION VEHICLES AND THEIR ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 3: FRONT LOADED REFUSE COLLECTION VEHICLES |
| I.S. EN 60947-1:2007 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES |
| I.S. EN 60335-2-51:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-51: PARTICULAR REQUIREMENTS FOR STATIONARY CIRCULATION PUMPS FOR HEATING AND SERVICE WATER INSTALLATIONS (IEC 60335-2-51:2002 (EQV)) |
| I.S. EN 14504:2016 | INLAND NAVIGATION VESSELS - FLOATING LANDING STAGES AND FLOATING EQUIPMENT ON INLAND WATERS - REQUIREMENTS, TESTS |
| I.S. EN 60934:2001 | CIRCUIT BREAKERS FOR EQUIPMENT (CBE) (IEC 60934:2000 (EQV)) |
| EN 60601-1-11:2015 | Medical electrical equipment - Part 1-11: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment |
| XP CEN/TS 16134 : 2011 XP | CHIMNEY TERMINALS - GENERAL REQUIREMENTS AND MATERIAL INDEPENDENT TEST METHODS |
| I.S. EN 12405-2:2012 | GAS METERS - CONVERSION DEVICES - PART 2: ENERGY CONVERSION |
| BS EN 15502-1 : 2012 | GAS-FIRED HEATING BOILERS - PART 1: GENERAL REQUIREMENTS AND TESTS |
| CEN/TR 16061:2010 | Gas meters - Smart Gas Meters |
| S.R. CEN TS 81-83:2009 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - EXISTING LIFTS - PART 83: RULES FOR THE IMPROVEMENT OF THE RESISTANCE AGAINST VANDALISM |
| I.S. EN IEC 61076-3-119:2018 | CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-119: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR SHIELDED AND UNSHIELDED, FREE AND FIXED 10-WAY CONNECTORS WITH PUSH-PULL COUPLING FOR INDUSTRIAL ENVIRONMENTS FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 100 MHZ |
| BS EN 62560:2012+A11:2019 | Self-ballasted LED-lamps for general lighting services by voltage > 50 V. Safety specifications |
| BS EN 15220-1 : 2008 | RAILWAY APPLICATIONS - BRAKE INDICATORS - PART 1: PNEUMATICALLY OPERATED BRAKE INDICATORS |
| I.S. EN 16716:2017 | MOUNTAINEERING EQUIPMENT - AVALANCHE AIRBAG SYSTEMS - SAFETY REQUIREMENTS AND TEST METHODS |
| I.S. EN 61032:2001 | PROTECTION OF PERSONS AND EQUIPMENT BY ENCLOSURES - PROBES FOR VERIFICATION |
| S.R. CEN/TS 16819:2015 | POSTAL SERVICES - PARCEL BOXES FOR END USE - TECHNICAL FEATURES |
| I.S. EN 3660-066:2017 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 066: CABLE OUTLET, STYLE K, 90 DEGREES, FOR HEAT SHRINKABLE BOOT, SHIELDED, SEALED - PRODUCT STANDARD |
| I.S. EN 15684:2012 | BUILDING HARDWARE - MECHATRONIC CYLINDERS - REQUIREMENTS AND TEST METHODS |
| UNE-EN 50524:2010 | Data sheet and name plate for photovoltaic inverters |
| I.S. EN 16304:2013 | AUTOMATIC VENT VALVES FOR GAS BURNERS AND GAS BURNING APPLIANCES |
| I.S. EN 16327:2014 | FIRE-FIGHTING - POSITIVE-PRESSURE PROPORTIONING SYSTEMS (PPPS) AND COMPRESSED-AIR FOAM SYSTEMS (CAFS) |
| I.S. EN 81-20:2014 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 20: PASSENGER AND GOODS PASSENGER LIFTS |
| I.S. EN 50107-1:2002 | SIGNS AND LUMINOUS-DISCHARGE-TUBE INSTALLATIONS OPERATING FROM A NO-LOAD RATED OUTPUT VOLTAGE EXCEEDING 1 KV BUT NOT EXCEEDING 10 KV - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 60079-26:2015 | EXPLOSIVE ATMOSPHERES - PART 26: EQUIPMENT WITH EQUIPMENT PROTECTION LEVEL (EPL) GA |
| I.S. EN 50483-4:2009 | TEST REQUIREMENTS FOR LOW VOLTAGE AERIAL BUNDLED CABLE ACCESSORIES - PART 4: CONNECTORS |
| I.S. EN 50411-3-1:2012 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: FIBRE MANAGEMENT SYSTEM, SPLICE WALL BOX, FOR CATEGORY C & G |
| I.S. EN 88528-11:2004 | RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - ROTARY UNINTERRUPTIBLE POWER SYSTEMS - PERFORMANCE REQUIREMENTS AND TEST METHODS |
| CEI EN 61005 : 2005 | RADIATION PROTECTION INSTRUMENTATION - NEUTRON AMBIENT DOSE EQUIVALENT (RATE) METERS |
| UNE-EN 50548:2012 | Junction boxes for photovoltaic modules |
| I.S. EN 61029-1:2009 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 1: GENERAL REQUIREMENTS |
| S.R. CLC/TS 50131-11:2012 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 11: HOLD-UP DEVICES |
| CEI EN 62310-3 : 2010 | STATIC TRANSFER SYSTEMS (STS) - PART 3: METHOD FOR SPECIFYING PERFORMANCE AND TEST REQUIREMENTS |
| CEI EN 50526-2 : 2014 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 2: VOLTAGE LIMITING DEVICES |
| CEI UNI EN 45510-2-2 : 1999 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-2: ELECTRICAL EQUIPMENT - UNINTERRUPTIBLE POWER SUPPLIES |
| CEI EN 62676-1-1 : 2014 | VIDEO SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 1-1: SYSTEM REQUIREMENTS - GENERAL |
| CEI EN 61643-11 : 2014 | LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 11: SURGE PROTECTIVE DEVICES CONNECTED TO LOW-VOLTAGE POWER SYSTEMS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 50526-2:2014 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 2: VOLTAGE LIMITING DEVICES |
| I.S. EN 61095:2009 | ELECTROMECHANICAL CONTACTORS FOR HOUSEHOLD AND SIMILAR PURPOSES |
| CEI 216-5/2 : 2002 | ELECTRICAL EQUIPMENT FOR THE DETECTION AND THE MEASUREMENT OF BURNING VAPOURS OR GASES OR TOXIC AND OF OXYGEN FOR CONTINUOUS OPERATION IN FIXED INSTALLATIONS IN NON-HAZARDOUS AREAS PART 2:GENERAL REQUIREMENTS AND TEST METHODS FOR DETECTORS OF GASES AND FLAMMABLE VAPOURS WITH ONE OR MORE FIXED ALARM LEVELS |
| I.S. EN 175301-801:2006 | DETAIL SPECIFICATION: HIGH DENSITY RECTANGULAR CONNECTORS, ROUND REMOVABLE CRIMP CONTACTS |
| I.S. EN 60728-14:2014 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 14: OPTICAL TRANSMISSION SYSTEMS USING RFOG TECHNOLOGY |
| CEI EN 50348 : 2011 | STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR NON-IGNITABLE LIQUID COATING MATERIAL - SAFETY REQUIREMENTS |
| BS EN 60309-1 : 1999 | PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSES - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 415-8:2008 | SAFETY OF PACKAGING MACHINES - PART 8: STRAPPING MACHINES |
| CEI EN 60974-7 : 2014 | ARC WELDING EQUIPMENT - PART 7: TORCHES |
| I.S. EN 60335-2-86:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-86: PARTICULAR REQUIREMENTS FOR ELECTRIC FISHING MACHINES |
| PREN 453 : DRAFT 2011 | FOOD PROCESSING MACHINERY - DOUGH MIXERS - SAFETY AND HYGIENE REQUIREMENTS |
| CLC/TS 50131-2-2:2004 | Alarm systems - Intrusion systems - Part 2-2: Requirements for passive infrared detectors |
| I.S. EN 50446:2006 | STRAIGHT THERMOCOUPLE ASSEMBLY WITH METAL OR CERAMIC PROTECTION TUBE AND ACCESSORIES |
| BS EN 15746-2 : 2010 | RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| CLC/TS 50131-2-7-3:2009 | Alarm systems - Intrusion and hold-up systems - Part 2-7-3: Intrusion detectors - Glass break detectors (active) |
| BS EN 115-1:2017 | Safety of escalators and moving walks Construction and installation |
| I.S. EN IEC 62688:2018 | CONCENTRATOR PHOTOVOLTAIC (CPV) MODULES AND ASSEMBLIES - SAFETY QUALIFICATION |
| I.S. EN 50091-1-1:2004 | UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 1-1: GENERAL AND SAFETY REQUIREMENTS FOR UPS USED IN OPERATOR ACCESS AREAS |
| S.R. CLC/TS 50131-2-8:2012 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-8: INTRUSION DETECTORS - SHOCK DETECTORS |
| I.S. EN 1870-19:2013 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS |
| I.S. EN 50617-1:2015 | RAILWAY APPLICATIONS - TECHNICAL PARAMETERS OF TRAIN DETECTION SYSTEMS FOR THE INTEROPERABILITY OF THE TRANS-EUROPEAN RAILWAY SYSTEM - PART 1: TRACK CIRCUITS |
| I.S. EN 61076-2-113:2017 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-113: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CONNECTORS WITH M12 SCREW LOCKING WITH POWER AND SIGNAL CONTACTS FOR DATA TRANSMISSION WITH FREQUENCY UP TO 100 MHZ |
| NF EN 1829-1 : 2010 | HIGH-PRESSURE WATER JET MACHINES - SAFETY REQUIREMENTS - PART 1: MACHINES |
| DIN EN 54-24:2008-06 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 24: COMPONENTS OF VOICE ALARM SYSTEMS - LOUDSPEAKERS |
| BS EN 50131-4:2009 | Alarm systems. Intrusion and hold-up systems Warning devices |
| DIN EN 474-1:2014-03 | EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| PREN 17110 : DRAFT 2017 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - VAPOUR MANIFOLD VENT VALVE |
| BS EN 13611:2015 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. General requirements |
| BS EN 60079-0 : 2012 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS |
| UNE-EN 60079-19:2011 | Explosive atmospheres - Part 19: Equipment repair, overhaul and reclamation |
| EN IEC 62561-6:2018/AC:2018-04 | LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 6: REQUIREMENTS FOR LIGHTNING STRIKE COUNTERS (LSC) (IEC 62561-6:2018) |
| ISO/TR 14799-1:2015 | Comparison of worldwide escalator and moving walk safety standards Part 1: Rule by rule comparison |
| I.S. EN 16678:2015 | SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - AUTOMATIC SHUT-OFF VALVES FOR OPERATING PRESSURE OF ABOVE 500 KPA UP TO AND INCLUDING 6300 KPA |
| S.R. CEN/TS 15213-6:2011 | ROAD TRANSPORT AND TRAFFIC TELEMATICS - AFTER-THEFT SERVICES FOR THE RECOVERY OF STOLEN VEHICLES - PART 6: TEST PROCEDURES |
| UNI EN 15869-3 : 2010 | INLAND NAVIGATION VESSELS - ELECTRICAL SHORE CONNECTION, THREE-PHASE CURRENT 400 V, UP TO 63 A, 50 HZ - PART 3: ON-BOARD UNIT, SAFETY REQUIREMENTS |
| 16/30337481 DC : 0 | BS EN 13525 - FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY |
| UNI EN 15166 : 2009 | FOOD PROCESSING MACHINERY - AUTOMATIC BACK SPLITTING MACHINES OF BUTCHERY CARCASSES - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN 13216-1:2004-11 | CHIMNEYS - TEST METHODS FOR SYSTEM CHIMNEYS - PART 1: GENERAL TEST METHODS |
| I.S. EN 60335-2-99:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-99: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC HOODS |
| EN 16719:2018 | Transport platforms |
| UNI EN 1672-1 : 2014 | FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS |
| PREN 50436-1 : DRAFT 2012 | ALCOHOL INTERLOCKS - TEST METHODS AND PERFORMANCE REQUIREMENTS - PART 1: INSTRUMENTS FOR DRINK-DRIVING-OFFENDER PROGRAMS |
| 15/30279801 DC : 0 | BS EN 15746-2 - RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| UNI EN 15609 : 2012 | LPG EQUIPMENT AND ACCESSORIES - LPG PROPULSION SYSTEMS FOR BOATS, YACHTS AND OTHER CRAFT |
| BS EN 1459-2 : 2015 | ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SLEWING VARIABLE-REACH TRUCKS |
| NF EN 50548 : 2011 AMD 2 2014 | JUNCTION BOXES FOR PHOTOVOLTAIC MODULES |
| I.S. EN 60728-4:2008 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 4: PASSIVE WIDEBAND EQUIPMENT FOR COAXIAL CABLE NETWORKS |
| UNE-EN 12845:2016 | Fixed firefighting systems - Automatic sprinkler systems - Design, installation and maintenance |
| I.S. EN 62533:2016 | RADIATION PROTECTION INSTRUMENTATION - HIGHLY SENSITIVE HAND-HELD INSTRUMENTS FOR PHOTON DETECTION OF RADIOACTIVE MATERIAL |
| ENV 50231 : 1997 | AVIATION GROUND LIGHTING ELECTRICAL INSTALLATION - CONSTANT CURRENT REGULATOR: EQUIPMENT SPECIFICATIONS AND TESTS |
| NFP 99 200 : 2006 AMD 1 2016 | ROAD TRAFFIC CONTROL - ROAD TRAFFIC LIGHTS - TECHNICAL SPECIFICATIONS |
| PREN 50136-2 : DRAFT 2011 | ALARM SYSTEMS - ALARM TRANSMISSION SYSTEMS AND EQUIPMENT - PART 2: REQUIREMENTS FOR SUPERVISED PREMISES TRANSCEIVER (SPT) |
| UNI EN 14154-4 : 2015 | WATER METERS - PART 4: ADDITIONAL FUNCTIONALITIES |
| NF EN 50491-2 : 2011 AMD 1 2017 | GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 2: ENVIRONMENTAL CONDITIONS |
| 17/30356731 DC : 0 | BS EN 12405-1 - GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| DIN EN 16864:2015-06 (Draft) | BUILDING HARDWARE - MECHATRONIC PADLOCKS - REQUIREMENTS AND TEST METHODS |
| EN 50328 : 2003 COR 2006 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRONIC POWER CONVERTERS FOR SUBSTATIONS |
| CEI 23-78 : 2004 | ELECTRICAL ACCESSORIES PORTABLE RESIDUAL CURRENT DEVICES WITHOUT INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USE (PRCDS) |
| PREN 50548 : DRAFT 2009 | JUNCTION BOXES FOR PHOTOVOLTAIC MODULES |
| EN 60838-1:2017/A1:2017 | MISCELLANEOUS LAMPHOLDERS - PART 1: GENERAL REQUIREMENTS AND TESTS (IEC 60838-1:2016/A1:2017) |
| CEI EN 60974-11 : 2012 | ARC WELDING EQUIPMENT - PART 11: ELECTRODE HOLDERS |
| UNE-EN 61995-1:2010 | Devices for the connection of luminaires for household and similar purposes -- Part 1: General requirements |
| UNE-EN 62852:2015 | Connectors for DC-application in photovoltaic systems - Safety requirements and tests |
| CEI EN 61800-4 : 2003 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 4: GENERAL REQUIREMENTS - RATING SPECIFICATIONS FOR A/C/ POWER DRIVE SYSTEMS ABOVE 1000 V A.C. AND NOT EXCEEDING 35 KV |
| I.S. EN 60255-1:2010 | MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 1: COMMON REQUIREMENTS |
| CEI EN 50131-4 : 2010 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 4: WARNING DEVICES |
| S.R. CLC/TR 50656:2016 | SPD APPLICATION IN CONJUNCTION WITH CLASS 2 EQUIPMENT |
| EN 12301:2000+A1:2008 | Plastics and rubber machines - Calenders - Safety requirements |
| EN 13976-2:2011 | Rescue systems - Transportation of incubators - Part 2: System requirements |
| BS EN 809:1998+A1:2009 | Pumps and pump units for liquids. Common safety requirements |
| DIN EN 619:2011-02 | Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads (includes Amendment A1:2010) |
| I.S. EN 62196-1:2014 | PLUGS, SOCKET-OUTLETS, VEHICLE CONNECTORS AND VEHICLE INLETS - CONDUCTIVE CHARGING OF ELECTRIC VEHICLES - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 61076-3-114:2009 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-114: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR PROTECTIVE HOUSINGS FOR USE WITH 8-WAY SHIELDED AND UNSHIELDED CONNECTORS FOR FREQUENCIES UP TO 600 MHZ FOR INDUSTRIAL ENVIRONMENTS INCORPORATING THE IEC 60603-7 SERIES INTERFACE - VARIANT 11 RELATED TO IEC 61076-3-106 - BAYONET COUPLING TYPE |
| I.S. EN 61050:1993 | TRANSFORMERS FOR TUBULAR DISCHARGE LAMPS HAVING A NON LOAD OUTPUT VOLTAGE EXCEEDING 1000 V (GENERALLY CALLED NEON TRANSFORMERS) - GENERAL AND SAFETY REQUIREMENTS |
| EN 13617-1:2012 | Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units |
| I.S. EN 60077-2:2017 | RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 2: ELECTROTECHNICAL COMPONENTS - GENERAL RULES |
| I.S. EN 60728-5:2016 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 5: HEADEND EQUIPMENT |
| I.S. EN 50131-6:2017 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 6: POWER SUPPLIES |
| DIN EN 1870-4:2012-06 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTIBLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING |
| I.S. EN 61242:1999 | ELECTRICAL ACCESSORIES - CABLE REELS FOR HOUSEHOLD AND SIMILAR PURPOSES |
| I.S. EN 62271-103:2011 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 103: SWITCHES FOR RATED VOLTAGES ABOVE 1 KV UP TO AND INCLUDING 52 KV |
| I.S. EN 62314:2006 | SOLID-STATE RELAYS |
| I.S. EN 50250:2002 | CONVERSION ADAPTERS FOR INDUSTRIAL USE |
| S.R. CLC/TS 50537-3:2010 | RAILWAY APPLICATIONS - MOUNTED PARTS OF THE TRACTION TRANSFORMER AND COOLING SYSTEM - PART 3: WATER PUMP FOR TRACTION CONVERTERS |
| I.S. EN 60335-2-73:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-73: PARTICULAR REQUIREMENTS FOR FIXED IMMERSION HEATERS |
| I.S. EN 61800-2:2015 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 2: GENERAL REQUIREMENTS - RATING SPECIFICATIONS FOR LOW VOLTAGE ADJUSTABLE SPEED A.C. POWER DRIVE SYSTEMS |
| I.S. EN 15001-1:2009 | GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING |
| I.S. EN 50223:2015 | STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE FLOCK MATERIAL - SAFETY REQUIREMENTS |
| I.S. EN 60068-2-68:1997 | ENVIRONMENTAL TESTING - PART 2: TESTS - TEST L: DUST AND SAND |
| I.S. EN 50085-1:2005 | CABLE TRUNKING SYSTEMS AND CABLE DUCTING SYSTEMS FOR ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 62271-201:2014 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 201: AC SOLID-INSULATION ENCLOSED SWITCHGEAR AND CONTROLGEAR FOR RATED VOLTAGES ABOVE 1 KV AND UP TO AND INCLUDING 52 KV |
| I.S. EN 12012-1:2007 | PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS |
| I.S. CLC TS 61643-12:2006 | LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 12: SURGE PROTECTIVE DEVICES CONNECTED TO LOW-VOLTAGE POWER SYSTEMS - SELECTION AND APPLICATION PRINCIPLES |
| I.S. EN 62271-109:2009 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 109: ALTERNATING-CURRENT SERIES CAPACITOR BY-PASS SWITCHES (IEC 62271-109:2008 (EQV)) |
| I.S. EN 15650:2010 | VENTILATION FOR BUILDINGS - FIRE DAMPERS |
| EN 62477-1:2012/A1:2017 | SAFETY REQUIREMENTS FOR POWER ELECTRONIC CONVERTER SYSTEMS AND EQUIPMENT - PART 1: GENERAL (IEC 62477-1:2012/A1:2016) |
| UNE-EN 12463:2006 | Food processing machinery - Filling machines and auxiliary machines - Safety and hygiene requirements |
| NF EN 12312-5 : 2005 + A1 2010 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 5: AIRCRAFT FUELLING EQUIPMENT |
| EN 61918:2013/AC:2014 | INDUSTRIAL COMMUNICATION NETWORKS - INSTALLATION OF COMMUNICATION NETWORKS IN INDUSTRIAL PREMISES (IEC 61918:2013, MODIFIED) |
| EN 61005:2017 | Radiation protection instrumentation - Neutron ambient dose equivalent (rate) meters |
| EN 50516-1-1:2011/AC:2012 | INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 1-1: TYPE SC-RJ PC INDUSTRIAL TERMINATED ON EN 60793-2-10 CATEGORY A1A AND A1B MULTIMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY I (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN IEC 61753-1-3 |
| EN 61987-10:2009/AC:2011 | INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 10: LISTS OF PROPERTIES (LOPS) FOR INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL FOR ELECTRONIC DATA EXCHANGE - FUNDAMENTALS |
| EN 62040-1:2008/A1:2013 | UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 1: GENERAL AND SAFETY REQUIREMENTS FOR UPS (IEC 62040-1:2008/A1:2013) |
| DIN EN 13390:2011-02 | Food processing machinery - Pie and tart machines - Safety and hygiene requirements (includes Amendment A1:2009) |
| DIN EN 14678-1:2013-06 | LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers |
| DIN EN 777-4:2009-09 | MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 4: SYSTEM H - SAFETY |
| DIN EN 13621:2011-02 | Food processing machinery - Salad dryers - Safety and hygiene requirements (includes Amendment A1:2010) |
| EN 45545-1 : 2013 COR 2013 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 1: GENERAL |
| DIN EN 415-6:2013-09 | Safety of packaging machines - Part 6: Pallet wrapping machines |
| DIN EN 13763-25:2004-07 | Explosives for civil uses - Detonators and relays - Part 25: Determination of transfer capacity of surface connectors, relays and coupling accessories |
| DIN EN 12405-1:2011-04 | GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| DIN EN 1501-1:2016-03 | Refuse collection vehicles - General requirements and safety requirements - Part 1: Rear loaded refuse collection vehicles (includes Amendment A1:2015) |
| DIN EN 1218-2:2009-10 | Safety of woodworking machines - Tenoning machines - Part 2: Double end tenoning and/or profiling machines fed by chain or chains (includes Amendment A1:2009) |
| DIN EN 13278:2014-03 | OPEN FRONTED GAS-FIRED INDEPENDENT SPACE HEATERS |
| DIN EN 1870-5:2013-01 | Safety of woodworking machines - Circular sawing machines - Part 5: Circular saw benches/up-cutting cross-cut sawing machines (includes Amendment A2:2012) |
| DIN EN 419-1:2009-07 | NON-DOMESTIC GAS-FIRED OVERHEAD LUMINOUS RADIANT HEATERS - PART 1: SAFETY |
| DIN EN 1028-1:2008-09 | Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 1: Classification - General and safety requirements (includes Amendment A1:2008) |
| DIN EN 13289:2015-12 (Draft) | Pasta processing plant - Dryers and coolers - Safety and hygiene requirements; German and English version prEN 13289:2015 |
| DIN EN 13534:2011-02 | Food processing machinery - Curing injection machines - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN 13237:2013-01 | Potentially explosive atmospheres - Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres |
| DIN EN 12921-2:2010-01 | Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 2: Safety of machines using water based cleaning liquids (includes Amendment A1:2008) |
| DIN EN 14492-2:2016-08 (Draft) | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| DIN EN 1760-2:2009-08 | SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE EDGES AND PRESSURE SENSITIVE BARS |
| DIN EN 12921-3:2010-02 | Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 3: Safety of machines using flammable cleaning liquids (includes Amendment A1:2008) |
| EN 60598-2-20:2015/AC:2017-01 | LUMINAIRES - PART 2-20: PARTICULAR REQUIREMENTS - LIGHTING CHAINS (IEC 60598-2-20:2014/COR1:2016) |
| DIN EN 609-2:2010-07 | Agricultural and forestry machinery - Safety of log splitters - Part 2: Screw splitters (includes Amendment A1:2009) |
| DIN EN 1760-1:2009-08 | SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE MATS AND PRESSURE SENSITIVE FLOORS |
| DIN EN 1501-2:2010-02 | Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 2: Side loaded refuse collection vehicles (includes Amendment A1:2009) |
| DIN EN 289:2014-09 | PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS |
| DIN EN 453:2015-04 | FOOD PROCESSING MACHINERY - DOUGH MIXERS - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN 1218-5:2010-02 | Safety of woodworking machines - Tenoning machines - Part 5: One side profiling machines with fixed table and feed rollers or feed chain (includes Amendment A1:2009) |
| DIN EN 13871:2015-01 | FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINERY - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN 14492-1:2015-05 (Draft) | Cranes - Power driven winches & hoists - part 1 power driven winches; German and English version prEN 14492-1:2015 |
| BS EN 1889-1:2011 | Machines for underground mines. Mobile machines working underground. Safety Rubber tyred vehicles |
| BS EN 54-4:1998 | Fire detection and fire alarm systems Power supply equipment |
| UNE-EN 1674:2015 | Food processing machinery - Dough sheeters - Safety and hygiene requirements |
| DIN EN 1889-2:2009-07 | MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 2: RAIL LOCOMOTIVES |
| UNE-EN 61439-1:2012 | Low-voltage switchgear and controlgear assemblies - Part 1: General rules |
| BS EN 1870-8:2012 | Safety of woodworking machines. Circular sawing machines Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading |
| BS EN 14543:2017 | Specification for dedicated liquefied petroleum gas appliances. Parasol patio heaters. Flueless radiant heaters for outdoor or amply ventilated area use |
| BS EN 1218-1 : 1999 | SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 1: SINGLE END TENONING MACHINES WITH SLIDING TABLE |
| BS EN 13278:2013 | Open fronted gas-fired independent space heaters |
| BS EN 45510-2-2:1999 | Guide for the procurement of power station equipment. Electrical equipment Uninterruptible power supplies - Uninterruptible power supplies for power plants |
| BS EN 14957 : 2006 | FOOD PROCESSING MACHINERY - DISHWASHING MACHINES WITH CONVEYOR - SAFETY AND HYGIENE REQUIREMENTS |
| UNE-EN 12779:2016 | Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements |
| BS EN 609-1:2017 | Agricultural and forestry machinery. Safety of log splitters Wedge splitters |
| BS EN 15267-3:2007 | Air quality. Certification of automated measuring systems Performance criteria and test procedures for automated measuring systems for monitoring emissions from stationary sources |
| UNE-HD 60364-7-730:2016 | Low-voltage electrical installations - Part 7-730: Requirements for special installations or locations - Onshore units of electrical shore connections for inland navigation vessels |
| BS EN 62135-1:2015 | Resistance welding equipment Safety requirements for design, manufacture and installation |
| BS EN 12581 : 2005 | COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS |
| BS EN 609-2 : 2000 | AGRICULTURAL AND FORESTRY MACHINERY - SAFETY OF LOG SPLITTERS - PART 2: SCREW SPLITTERS |
| BS EN 12012-2 : 2001 | PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 2: SAFETY REQUIREMENTS FOR STRAND PELLETISERS |
| BS EN 13352:2012 | Specification for the performance of automatic tank contents gauges |
| BS EN 1870-16:2012 | Safety of woodworking machines. Circular sawing machines Double mitre sawing machines for V cutting |
| BS EN 13732:2013 | Food processing machinery. Bulk milk coolers on farms. Requirements for performance, safety and hygiene |
| BS EN 12309-2:2015 | Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW Safety |
| BS EN 14043:2014 | High rise aerial appliances for fire and rescue service use. Turntable ladders with combined movements. Safety and performance requirements and test methods |
| BS EN 13447:2001 | Electrically propelled road vehicles. Terminology |
| BS EN 848-3:2012 | Safety of woodworking machines. One side moulding machines with rotating tool Numerically controlled (NC) boring and routing machines |
| BS EN 45510-2-9:2008 | Guide for procurement of power station equipment Electrical equipment. Cabling systems |
| DIN EN 12301:2010-02 | PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS |
| UNE-EN 1808:2016 | Safety requirements for suspended access equipment - Design calculations, stability criteria, construction - Examinations and tests |
| BS EN 14678-1:2013 | LPG equipment and accessories. Construction and performance of LPG equipment for automotive filling stations Dispensers |
| BS EN 778:2009 | Domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 70 kW, without a fan to assist transportation of combustion air and/or combustion products |
| I.S. EN 859:2007 | SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANNING MACHINES |
| BS EN 54-3:2014 | Fire detection and fire alarm systems Fire alarm devices. Sounders |
| BS EN 12158-1 : 2000 | BUILDERS' HOISTS FOR GOODS - PART 1: HOISTS WITH ACCESSIBLE PLATFORMS |
| UNE-EN 13160-5:2017 | Leak detection systems - Part 5: Requirements and test/assessment methods for in-tank gauge systems and pressurised pipework systems |
| BS EN 14744:2005 | Inland navigation vessels and sea-going vessels. Navigation light |
| BS EN ISO 16484-2:2004 | Building automation and control systems (BACS) Hardware |
| BS EN 1859 : 2009 | CHIMNEYS - METAL CHIMNEYS - TEST METHODS |
| BS EN 1034-22 : 2005 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 22: WOOD GRINDERS |
| BS EN 60204-1 : 2006 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 860:2007 | SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANING MACHINES |
| BS EN 1915-1:2013 | Aircraft ground support equipment. General requirements Basic safety requirements |
| BS EN 60204-32:2008 | Safety of machinery. Electrical equipment of machines Requirements for hoisting machines |
| BS EN 14960:2013 | Inflatable play equipment. Safety requirements and test methods |
| BS EN 617 : 2001 | |
| BS EN 777-3:2009 | Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use System F. Safety |
| BS EN 13244-3:2002 | Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage. Polyethylene (PE) Fittings |
| BS EN 14655 : 2005 | FOOD PROCESSING MACHINERY - BAGUETTE SLICERS - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 1319:2009 | Domestic gas-fired forced convection air heaters for space heating, with fan-assisted burners not exceeding a net heat input of 70 kW |
| BS EN 12979:2002 | Automotive LPG systems. Installation requirements |
| BS EN 1870-14 : 2007 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 14: VERTICAL PANEL SAWING MACHINES |
| BS EN 13390 : 2002 | FOOD PROCESSING MACHINERY - PIE AND TART MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 14492-2 : 2006 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| UNE-EN 14597:2014 | Temperature control devices and temperature limiters for heat generating systems |
| BS EN 61439-1:2011 | Low-voltage switchgear and controlgear assemblies General rules |
| BS EN 1870-17 : 2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS) |
| PD ISO/TR 14799-1:2005 | Comparison of worldwide escalator and moving walk safety standards Rule by rule comparison |
| BS EN 62271-202:2014 | High-voltage switchgear and controlgear High-voltage/low-voltage prefabricated substation |
| BS EN 12629-4 : 2001 | MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 4: CONCRETE ROOF TILE MAKING MACHINES |
| BS EN 303-1:2017 | Heating boilers Heating boilers with forced draught burners. Terminology, general requirements, testing and marking |
| DIN EN 12514-1:2009-06 (Draft) | INSTALLATIONS FOR OIL SUPPLY SYSTEMS FOR OIL BURNERS - PART 1: SAFETY REQUIREMENTS AND TESTS - PARTS, OIL FEED PUMPS, CONTROL AND SAFETY DEVICES, SUPPLY TANKS |
| BS EN 60730-1:2011 | Automatic electrical controls for household and similar use General requirements |
| BS EN 61984:2009 | Connectors. Safety requirements and tests |
| EN 60079-2:2014/AC:2015 | EXPLOSIVE ATMOSPHERES - PART 2: EQUIPMENT PROTECTION BY PRESSURIZED ENCLOSURE 'P' (IEC 60079-2:2014) |
| DIN EN 12693:2008-09 | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS |
| DIN EN 953:1997-11 | SAFETY OF MACHINERY - GUARDS - GENERAL REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF FIXED AND MOVABLE GUARDS |
| DIN EN 14504:2016-09 | INLAND NAVIGATION VESSELS - FLOATING LANDING STAGES AND FLOATING EQUIPMENT ON INLAND WATERS - REQUIREMENTS, TESTS |
| EN 60079-0:2012/A11:2013 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED) |
| EN 60077-1:2017 | Railway applications - Electric equipment for rolling stock - Part 1: General service conditions and general rules |
| DIN EN 16716:2017-05 | MOUNTAINEERING EQUIPMENT - AVALANCHE AIRBAG SYSTEMS - SAFETY REQUIREMENTS AND TEST METHODS |
| EN 60335-2-81:2003/A2:2012 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-81: PARTICULAR REQUIREMENTS FOR FOOT WARMERS AND HEATING MATS (IEC 60335-2-81:2002/A2:2011) |
| HD 384.7.702 : 200S2 | ELECTRICAL INSTALLATIONS OF BUILDINGS - REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - SWIMMING POOLS AND OTHER BASINS |
| EN 61643-21:2001/A2:2013 | LOW VOLTAGE SURGE PROTECTIVE DEVICES - PART 21: SURGE PROTECTIVE DEVICES CONNECTED TO TELECOMMUNICATIONS AND SIGNALLING NETWORKS - PERFORMANCE REQUIREMENTS AND TESTING METHODS (IEC 61643-21:2000/A2:2012) |
| DIN EN 14492-2:2010-05 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| EN 50216-11:2008 | Power transformer and reactor fittings - Part 11: Oil and winding temperature indicators |
| EN 1114-3:2001+A1:2008 | Plastics and rubber machines - Extruders and extrusion lines - Part 3: Safety requirements for haul-offs |
| EN 50526-2:2014 | Railway applications - Fixed installations - D.C. surge arresters and voltage limiting devices - Part 2: Voltage limiting devices |
| EN 1034-22:2005+A1:2009 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 22: Wood Grinders |
| EN 60309-1:1999/A1:2007/AC:2014 | PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSES - PART 1: GENERAL REQUIREMENTS (IEC 60309-1:1999/A2:2012) |
| DIN EN 12259-5:2002-12 | FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR SPRINKLER AND WATER SPRAY SYSTEMS - PART 5: WATER FLOW DETECTORS |
| DIN EN 14817:2006-08 | Railway applications - Suspension components - Air spring control elements |
| EN 50250 : 2002 AMD 1 2015 | CONVERSION ADAPTERS FOR INDUSTRIAL USE |
| EN 61140:2016 | Protection against electric shock - Common aspects for installation and equipment |
| EN 12966:2014 | Road vertical signs - Variable message traffic signs |
| EN 88-1:2011+A1:2016 | Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 50 kPa |
| EN 61076-2-101:2012 | Connectors for electronic equipment - Product requirements - Part 2-101: Circular connectors - Detail specification for M12 connectors with screw-locking |
| EN 1034-14:2005+A1:2009 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 14: Reel splitter |
| EN 61036:1996/A1:2000 | ALTERNATING CURRENT STATIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 1 AND 2) |
| EN 61076-3-115:2010 | Connectors for electronic equipment - Product requirements - Part 3-115: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 12 related to IEC 61076-3-106 - Push-pull type |
| EN 13288:2005+A1:2009 | Food processing machinery - Bowl lifting and tilting machines - Safety and hygiene requirements |
| EN 12921-3:2005+A1:2008 | Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 3: Safety of machines using flammable cleaning liquids |
| EN 60335-2-71 : 2003 AMD 1 2007 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-71: PARTICULAR REQUIREMENTS FOR ELECTRICAL HEATING APPLIANCES FOR BREEDING AND REARING ANIMALS |
| EN 1034-3:2011 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 3: Rereelers and winders |
| EN 12415:2000/A1:2002 | SAFETY OF MACHINE TOOLS - SMALL NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES |
| EN 50446:2006 | Straight thermocouple assembly with metal or ceramic protection tube and accessories |
| EN 61048:2006/A1:2016 | AUXILIARIES FOR LAMPS - CAPACITORS FOR USE IN TUBULAR FLUORESCENT AND OTHER DISCHARGE LAMP CIRCUITS - GENERAL AND SAFETY REQUIREMENTS (IEC 61048:2006/A1:2015) |
| EN 12981:2005+A1:2009 | Coating plants - Spray booths for application of organic powder coating material - Safety requirements |
| EN 13447:2001 | Electrically propelled road vehicles - Terminology |
| EN 12067-1 : 98 AMD 1 2003 | GAS/AIR RATIO CONTROLS FOR GAS BURNERS AND GAS BURNING APPLIANCES - PART 1: PNEUMATIC TYPES |
| EN 61287-1:2014/AC:2014 | RAILWAY APPLICATIONS - POWER CONVERTERS INSTALLED ON BOARD ROLLING STOCK - PART 1: CHARACTERISTICS AND TEST METHODS (IEC 61287-1:2014) |
| EN 1247:2004+A1:2010 | Foundry machinery - Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi continuous casting machines |
| EN 50521:2008/A1:2012 | CONNECTORS FOR PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS |
| EN 1020:2009 | Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300 kW incorporating a fan to assist transportation of combustion air or combustion products |
| DIN EN 621:2010-04 | NON-DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW, WITHOUT A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR AND/OR COMBUSTION PRODUCTS |
| EN 60770-3:2014 | Transmitters for use in industrial-process control systems - Part 3: Methods for performance evaluation of intelligent transmitters |
| EN 13160-5:2016 | Leak detection systems - Part 5: Requirements and test/assessment methods for in-tank gauge systems and pressurised pipework systems |
| EN 50348:2010 | Stationary electrostatic application equipment for non-ignitable liquid coating material - Safety requirements |
| EN 60601-2-38:1996/A1:2000 | MEDICAL ELECTRICAL EQUIPMENT - PART 2: PARTICULAR REQUIREMENTS FOR THE SAFETY OF ELECTRICALLY OPERATED HOSPITAL BEDS |
| EN 62094-1:2003/A11:2003 | INDICATOR LIGHT UNITS FOR HOUSEHOLD AND SIMILAR FIXED-ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS |
| EN 61029-1:2009/A11:2010 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 1: GENERAL REQUIREMENTS |
| UNI EN 1218-2 : 2009 | SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 2: DOUBLE END TENONING AND/OR PROFILING MACHINES FED BY CHAIN OR CHAINS |
| DIN EN 815:1996-11 | SAFETY OF UNSHIELDED TUNNEL BORING MACHINES AND RODLESS SHAFT BORING MACHINES FOR ROCK - SAFETY REQUIREMENTS |
| EN 61076-2-109:2014 | Connectors for electronic equipment - Product requirements - Part 2-109: Circular connectors - Detail specification for connectors with M 12 × 1 screw-locking, for data transmission frequencies up to 500 MHz |
| EN 61984:2009 | Connectors - Safety requirements and tests |
| EN 61987-1:2007 | Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 1: Measuring equipment with analogue and digital output |
| DIN EN 14989-2:2008-03 | Chimneys - Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications - Part 2: Flue and air supply ducts for room sealed appliances |
| EN 60335-2-80:2003/A2:2009 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-80: PARTICULAR REQUIREMENTS FOR FANS |
| DIN EN 16864:2017-11 | BUILDING HARDWARE - MECHATRONIC PADLOCKS - REQUIREMENTS AND TEST METHODS |
| EN 61757-1 : 2012 | FIBRE OPTIC SENSORS - PART 1: GENERIC SPECIFICATION (IEC 61757-1:2012) |
| EN 61754-24-11:2009 | Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 24-11: Type SC-RJ connectors with protective housings based on IEC 61076-3-117 |
| EN 61958:2001 | High-voltage prefabricated switchgear and controlgear assemblies - Voltage presence indicating systems |
| EN 60598-2-21:2015/AC:2017-01 | LUMINAIRES - PART 2-21: PARTICULAR REQUIREMENTS - ROPE LIGHTS (IEC 60598-2-21:2014/COR1:2016) |
| EN 50522:2010 | Earthing of power installations exceeding 1 kV a.c. |
| EN 60998-2-2:2004 | Connecting devices for low-voltage circuits for household and similar purposes - Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units |
| EN 62841-1:2015/AC:2015 | ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 13611:2015/AC:2016 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| EN 60846-1:2014 | Radiation protection instrumentation - Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation - Part 1: Portable workplace and environmental meters and monitors |
| EN 13035-11:2006+A1:2010 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 11: Drilling machines |
| EN 60601-2-30:2000 | Medical electrical equipment - Part 2-30: Particular requirements for the safety, including essential performance, of automatic cycling non-invasive blood pressure monitoring equipment |
| DIN EN 12110:2003-05 | TUNNELLING MACHINES - AIR LOCKS - SAFETY REQUIREMENTS |
| DIN EN 1570-2:2017-03 | SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 2: LIFTING TABLES SERVING MORE THAN 2 FIXED LANDINGS OF A BUILDING, FOR LIFTING GOODS WITH A VERTICAL TRAVEL SPEED NOT EXCEEDING 0,15 M/S |
| EN 60998-1:2004 | Connecting devices for low-voltage circuits for household and similar purposes - Part 1: General requirements |
| EN 60947-5-3:2013 | Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB) |
| EN 61514:2002 | Industrial-process control systems - Methods of evaluating the performance of valve positioners with pneumatic outputs |
| EN 60934:2001/A2:2013 | CIRCUIT BREAKERS FOR EQUIPMENT (CBE) (IEC 60934:2000/A2:2013) |
| EN 50131-3:2009 | Alarm systems - Intrusion and hold-up systems - Part 3: Control and indicating equipment |
| DIN EN 13976-2:2011-08 | RESCUE SYSTEMS - TRANSPORTATION OF INCUBATORS - PART 2: SYSTEM REQUIREMENTS |
| EN 50123-7-1:2003 | Railway applications - Fixed installations - D.C. switchgear - Part 7-1: Measurement, control and protection devices for specific use in d.c. traction systems - Application guide |
| EN 50123-1:2003 | Railway applications - Fixed installations - D.C. switchgear - Part 1: General |
| EN 61241-11:2006 | Electrical apparatus for use in the presence of combustible dust - Part 11: Protection by intrinsic safety "iD" |
| EN 61557-12:2008 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 12: Performance measuring and monitoring devices (PMD) |
| CLC/TS 50131-11:2012 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 11: HOLD-UP DEVICES |
| EN 60068-2-68:1996 | Environmental testing - Part 2: Tests - Test L: Dust and sand |
| EN 61508-7:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7: Overview of techniques and measures |
| EN 60335-2-50:2003/A1:2008 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-50: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC BAINS-MARIE |
| DIN EN 12157:1999-08 | ROTODYNAMIC PUMPS - COOLANT PUMPS UNITS FOR MACHINE TOOLS - NOMINAL FLOW RATE, DIMENSIONS |
| OVE/ONORM EN 62020 : AMD 1 2006 | ELECTRICAL ACCESSORIES - RESIDUAL CURRENT MONITORS FOR HOUSEHOLD AND SIMILAR USES (RCMS) |
| EN 50379-2:2012 | Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances - Part 2: Performance requirements for apparatus used in statutory inspections and assessment |
| DIN EN 54-21:2006-08 | Fire detection and fire alarm systems - Part 21: Alarm transmission and fault warning routing equipment |
| ENV 50091-3 : 98 AMD 1 99 | UNINTERRUPTIBLE POWER SYSTEMS - PERFORMANCE REQUIREMENTS AND TEST METHODS |
| EN 15502-1:2012+A1:2015 | Gas-fired heating boilers - Part 1: General requirements and tests |
| EN 50299-2:2014 | Oil-immersed cable connection assemblies for transformers and reactors having highest voltage for equipment Um from 72,5 kV to 550 kV - Part 2: Dry-type cable terminations |
| EN 50066:1992 | Mini-couplers for the interconnection of electrical mains supplied equipment in road vehicles |
| EN 50156-1:2015 | Electrical equipment for furnaces and ancillary equipment - Part 1: Requirements for application design and installation |
| EN 60335-2-88:2002 | Household and similar electrical appliances - Safety - Part 2-88: Particular requirements for humidifiers intended for use with heating, ventilation, or air-conditioning systems |
| EN 61754-20-100:2012 | Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 20-100: Interface standard for LC connectors with protective housings related to IEC 61076-3-106 |
| EN 60335-2-91:2003 | Household and similar electrical appliances - Safety - Part 2-91: Particular requirements for walk-behind and hand-held lawn trimmers and lawn edge trimmers |
| EN 60439-5:2006 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 5: PARTICULAR REQUIREMENTS FOR ASSEMBLIES FOR POWER DISTRIBUTION IN PUBLIC NETWORKS |
| EN 50192:1995 | Arc welding equipment - Plasma cutting systems for manual use |
| HD 60364-7-712:2016 | Low-voltage electrical installations - Part 7-712: Requirements for special installations or locations - Photovoltaic (PV) systems |
| DIN EN 14710-1:2009-06 | Fire-fighting pumps — Fire-fighting centrifugal pumps without primer — Part 1: Classification, general and safety requirements |
| HD 630.3.1 S3:2002 | LOW-VOLTAGE FUSES - PART 3-1: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY UNSKILLED PERSONS (FUSES MAINLY FOR HOUSEHOLD AND SIMILAR APPLICATIONS) - SECTIONS 1 TO 4 |
| EN 62534:2015 | Radiation protection instrumentation - Highly sensitive hand-held instruments for neutron detection of radioactive material |
| EN 62870:2015 | Electrical installations for lighting and beaconing of aerodromes - Safety secondary circuits in series circuits - General safety requirements |
| EN 61753-1:2007 | Fibre optic interconnecting devices and passive components performance standard - Part 1: General and guidance for performance standards |
| EN 62115:2005/A12:2015 | ELECTRIC TOYS - SAFETY (IEC 62115:2003 + A1:2004, MODIFIED) |
| EN 62052-21:2004/A1:2017/AC:2018-04 | ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 21: TARIFF AND LOAD CONTROL EQUIPMENT (IEC 62052-21:2004/A1:2016/COR1:2018) |
| DIN EN 1114-2:1998-06 | PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 2: SAFETY REQUIREMENTS FOR DIE FACE PELLETISERS |
| EN 50123-4:2003/A1:2013 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SWITCHGEAR - PART 4: OUTDOOR D.C. DISCONNECTORS, SWITCH-DISCONNECTORS AND EARTHING SWITCHES |
| EN 61869-1:2009 | Instrument transformers - Part 1: General requirements |
| EN 12094-1:2003 | Fixed firefighting systems - Components for gas extinguishing systems - Part 1: Requirements and test methods for electrical automatic control and delay devices |
| EN 50083-3:2002 | Cable networks for television signals, sound signals and interactive services - Part 3: Active wideband equipment for coaxial cable networks |
| DIN EN 12094-4:2004-10 | Fixed firefighting systems - Components for gas extinguishing systems - Part 4: Requirements and test methods for container valve assemblies and their actuators; German version EN 12094-4:2004 |
| EN 60519-2:2006 | SAFETY IN ELECTROHEAT INSTALLATIONS - PART 2: PARTICULAR REQUIREMENTS FOR RESISTANCE HEATING EQUIPMENT |
| EN 12953-9:2007 | Shell boilers - Part 9: Requirements for limiting devices of the boiler and accessories |
| EN 1074-1:2000 | Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 1: General requirements |
| EN 60238 : 2004 AMD 2 2011 | EDISON SCREW LAMPHOLDERS (IEC 60238:2004/A2:2011) |
| HD 60269-3:2010/A1:2013 | LOW-VOLTAGE FUSES - PART 3: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY UNSKILLED PERSONS (FUSES MAINLY FOR HOUSEHOLD AND SIMILAR APPLICATIONS) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO F |
| EN 60598-2-14:2009 | Luminaires - Part 2-14: Particular requirements - Luminaires for cold cathode tubular discharge lamps (neon tubes) and similar equipment |
| UNI EN 620 : 2011 | CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - SAFETY AND EMC REQUIREMENTS FOR FIXED BELT CONVEYORS FOR BULK MATERIALS |
| DIN EN 81-41:2011-09 | Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 41: Vertical lifting platforms intended for use by persons with impaired mobility |
| EN 12348:2000+A1:2009 | Core drilling machines on stand - Safety |
| EN 50512:2009 | Electrical installations for lighting and beaconing of aerodromes - Advanced Visual Docking Guidance Systems (A-VDGS) |
| EN 45510-2-2 : 1999 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2: ELECTRICAL EQUIPMENT - SECTION 2: UNINTERRUPTIBLE POWER SUPPLIES |
| NF EN 1218-5 : 2004 + A1 2010 | SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 5: ONE SIDE PROFILING MACHINES WITH FIXED TABLE AND FEED ROLLERS OR FED BY CHAIN |
| EN 60146-1-1:2010 | Semiconductor converters - General requirements and line commutated converters - Part 1-1: Specification of basic requirements |
| EN 50123-2:2003 | Railway applications - Fixed installations - D.C. switchgear - Part 2: D.C. circuit breakers |
| EN 61076-3-117:2009 | Connectors for electronic equipment - Product requirements - Part 3-117: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 series interface - Variant 14 related to IEC 61076-3-106 - Push pull coupling |
| EN 50083-5:2001 | Cable networks for television signals, sound signals and interactive services - Part 5: Headend equipment |
| EN 61800-4:2003 | Adjustable speed electrical power drive systems - Part 4: General requirements - Rating specifications for a.c. power drive systems above 1 000 V a.c. and not exceeding 35 kV |
| EN 50133-2-1:2000 | Alarm systems - Access control systems for use in security applications - Part 2-1: General requirements for components |
| EN 60439-1:1999/A1:2004 | LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1 - TYPE TESTED AND PARTIALLY TYPE TESTED ASSEMBLIES |
| EN 61730-1:2007/A11:2014 | PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION (IEC 61730-1:2004, MODIFIED) |
| DIN EN 1458-1:2012-02 | DOMESTIC DIRECT GAS-FIRED TUBLE DRYERS OF TYPES B22D AND B23D, OF NOMINAL HEAT INPUT NOT EXCEEDING 6 KW - PART 1: SAFETY |
| EN 13862:2001+A1:2009 | Floor cutting-off machines - Safety |
| EN 61386-1:2008 | Conduit systems for cable management - Part 1: General requirements |
| EN 50125-1:2014 | Railway applications - Environmental conditions for equipment - Part 1: Rolling stock and on-board equipment |
| EN 60204-32:2008 | Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines |
| EN 12094-4:2004 | Fixed firefighting systems - Components for gas extinguishing systems - Part 4: Requirements and test methods for container valve assemblies and their actuators |
| EN 13160-6:2016 | Leak detection systems - Part 6: Sensors in monitoring wells |
| EN 50018 : 2000 AMD 1 2002 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - FLAMEPROOF ENCLOSURE "D" |
| EN 62040-1-1:2003/corrigendum:2004 | |
| DIN EN 15420:2011-11 | GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT EXCEEDING 70 KW, BUT NOT EXCEEDING 1000 KW |
| HD 60364-7-730:2015 | Low-voltage electrical installations - Part 7-730: Requirements for special installations or locations - Onshore units of electrical shore connections for inland navigation vessels |
| EN 12405-3:2015 | Gas meters - Conversion devices - Part 3: Flow computer |
| DIN EN 14886:2008-06 | Plastics and rubber machines - Bandknife cutting machines for block foams - Safety requirements |
| EN 12110:2014 | Tunnelling machines - Air locks - Safety requirements |
| EN 50136-2:2013 | ALARM SYSTEMS - ALARM TRANSMISSION SYSTEMS AND EQUIPMENT - PART 2: REQUIREMENTS FOR SUPERVISED PREMISES TRANSCEIVER (SPT) |
| EN 50131-2-7-3:2012/A2:2016 | Alarm systems - Intrusion and hold-up systems - Part 2-7-3: Intrusion detectors - Glass break detectors (active) |
| EN 62310-1:2005 | Static transfer systems (STS) - Part 1: General and safety requirements |
| EN 60255-1:2010 | Measuring relays and protection equipment - Part 1: Common requirements |
| EN 62561-6:2011 | Lightning protection system components (LPSC) - Part 6: Requirements for lightning strike counters (LSC) |
| EN 50132-4-1 : 2001 | ALARM SYSTEMS - CCTV SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 4-1: BLACK AND WHITE MONITORS |
| EN 50065-4-7 : 2005 COR 2006 | SIGNALLING ON LOW-VOLTAGE ELECTRICAL INSTALLATIONS IN THE FREQUENCY RANGE 3 KHZ TO 148,5 KHZ AND 1,6 MHZ TO 30 MHZ - PART 4-7: PORTABLE LOW VOLTAGE DECOUPLING FILTERS - SAFETY REQUIREMENTS |
| EN 50194:2000 | Electrical apparatus for the detection of combustible gases in domestic premises - Part 1: Test methods and performance requirements |
| EN 60335-2-10:2003/A1:2008 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-10: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES AND WET SCRUBBING MACHINES |
| EN 60728-5:2016 | Cable networks for television signals, sound signals and interactive services - Part 5: Headend equipment |
| EN 50107-2:2005 | Signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV - Part 2: Requirements for earth-leakage and open-circuit protective devices |
| DIN EN 953:2009-07 | SAFETY OF MACHINERY - GUARDS - GENERAL REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF FIXED AND MOVABLE GUARDS |
| EN 60335-2-51:2003/A2:2012 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-51: PARTICULAR REQUIREMENTS FOR STATIONARY CIRCULATION PUMPS FOR HEATING AND SERVICE WATER INSTALLATIONS (IEC 60335-2-51:2002/A2:2011) |
| EN 61557-16:2015 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 16: Equipment for testing the effectiveness of the protective measures of electrical equipment and/or medical electrical equipment |
| EN 50131-2-6:2008 | Alarm systems - Intrusion and hold-up systems - Part 2-6: Opening contacts (magnetic) |
| EN 12957:2001+A1:2009 | Machine tools - Safety - Electro discharge machines |
| EN 50215:2009 | Railway applications - Rolling stock - Testing of rolling stock on completion of construction and before entry into service |
| EN 60204-33:2011 | Safety of machinery - Electrical equipment of machines - Part 33: Requirements for semiconductor fabrication equipment |
| EN 50083-6:1997 | Cable networks for television signals, sound signals and interactive services - Part 6: Optical equipment |
| EN 60335-2-23:2003/A2:2015 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-23: PARTICULAR REQUIREMENTS FOR APPLIANCES FOR SKIN OR HAIR CARE (IEC 60335-2-23:2003/A2:2012, MODIFIED) |
| EN 12840 : 2001 | SAFETY OF MACHINE-TOOLS - MANUALLY CONTROLLED TURNING MACHINES WITH OR WITHOUT AUTOMATIC CONTROL |
| EN 62135-1:2015/AC:2016-02 | RESISTANCE WELDING EQUIPMENT - PART 1: SAFETY REQUIREMENTS FOR DESIGN, MANUFACTURE AND INSTALLATION |
| EN 50019:2000/corrigendum Apr. 2003 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - INCREASED SAFETY "E" |
| DIN EN 12067-1:1998-12 | GAS/AIR RATIO CONTROLS FOR GAS BURNERS AND GAS BURNING APPLIANCES - PART 1: PNEUMATIC TYPES |
| EN 62108:2016 | Concentrator photovoltaic (CPV) modules and assemblies - Design qualification and type approval |
| EN 50131-2-7-2 : 2012 AMD 2 2016 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-2: INTRUSION DETECTORS - GLASS BREAK DETECTORS (PASSIVE) |
| EN 50628:2016 | Erection of electrical installations in underground mines |
| EN 13570:2005+A1:2010 | Food processing machinery - Mixing machines - Safety and hygiene requirements |
| EN 50131-2-3:2008 | Alarm systems - Intrusion and hold-up systems - Part 2-3: Requirements for microwave detectors |
| EN 62093:2005 | Balance-of-system components for photovoltaic systems - Design qualification natural environments |
| DIN EN 983:1996-09 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - PNEUMATICS |
| EN 62864-1:2016 | Railway applications - Rolling stock - Power supply with onboard energy storage system - Part 1: Series hybrid system |
| EN 62252:2004 | Maritime navigation and radiocommunication equipment and systems - Radar for craft not in compliance with IMO SOLAS Chapter V - Performance requirements, methods of test and required test results |
| EN 1501-2:2005+A1:2009 | Refuse collection vehicles and associated lifting devices - General requirements and safety requirements - Part 2: Side loaded refuse collection vehicles |
| DIN EN 81-20:2014-11 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 20: PASSENGER AND GOODS PASSENGER LIFTS |
| EN 50194-2 : 2006 AMD 1 2016 | ELECTRICAL APPARATUS FOR THE DETECTION OF COMBUSTIBLE GASES IN DOMESTIC PREMISES - PART 2: ELECTRICAL APPARATUS FOR CONTINUOUS OPERATION IN A FIXED INSTALLATION IN RECREATIONAL VEHICLES AND SIMILAR PREMISES - ADDITIONAL TEST METHODS AND PERFORMANCE REQUIREMENTS |
| EN 50343 : 2014 AMD 1 2017 | RAILWAY APPLICATIONS - ROLLING STOCK - RULES FOR INSTALLATION OF CABLING |
| DIN EN 14438:2007-03 | Gas-fired insets for heating more than one room |
| EN 50491-2 : 2010 AMD 1 2015 | GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 2: ENVIRONMENTAL CONDITIONS |
| EN 61076-2-105:2008 | Connectors for electronic equipment - Product requirements - Part 2-105: Circular connectors - Detail specification for M5 connectors with screw-locking |
| EN 50091-1-2 : 98 COR 1 99 | |
| DIN EN 983:2009-06 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - PNEUMATICS |
| EN 60044-8:2002 | Instrument transformers - Part 8: Electronic current transformers |
| EN 12750:2013 | Safety of woodworking machines - Four sided moulding machines |
| EN 60974-6:2016 | Arc welding equipment - Part 6: Limited duty equipment |
| DIN EN 54-16:2008-06 | Fire detection and fire alarm systems - Part 16: Voice alarm control and indicating equipment |
| EN 50463:2007 | Railway applications - Energy measurement on board trains |
| EN 50486:2008 | Equipment for use in audio and video door-entry systems |
| EN 61557-1:2007 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 1: General requirements |
| DIN EN 815:2009-12 | SAFETY OF UNSHIELDED TUNNEL BORING MACHINES AND RODLESS SHAFT BORING MACHINES FOR ROCK - SAFETY REQUIREMENTS |
| EN 50291-2:2010 | Electrical apparatus for the detection of carbon monoxide in domestic premises - Part 2: Electrical apparatus for continuous operation in a fixed installation in recreational vehicles and similar premises including recreational craft - Additional test methods and performance requirements |
| EN 60335-2-45:2002/A2:2012 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-45: PARTICULAR REQUIREMENTS FOR PORTABLE HEATING TOOLS AND SIMILAR APPLIANCES (IEC 60335-2-45:2002/A2:2011) |
| EN 50015:1998 | Electrical apparatus for potentially explosive atmospheres - Oil immersion "o" |
| EN 50194-1:2009 | Electrical apparatus for the detection of combustible gases in domestic premises - Part 1: Test methods and performance requirements |
| EN 50516-3-1:2014 | Industrial connector sets and interconnect components to be used in optical fibre control and communication systems - Product specifications - Part 3-1: Type ODVA APC terminated on EN 60793-2-50 category B1.1 and B1.3 singlemode fibre to meet the requirements of category I (industrial environments) as specified in EN 50173-1 and IEC 61753-1-3 |
| EN 50467:2011 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS |
| EN 50131-2-5:2008 | Alarm systems - Intrusion and hold-up systems - Part 2-5: Requirements for combined passive infrared and ultrasonic detectors |
| CLC/TS 61643-12:2009 | LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 12: SURGE PROTECTIVE DEVICES CONNECTED TO LOW-VOLTAGE POWER DISTRIBUTION SYSTEMS - SELECTION AND APPLICATION PRINCIPLES |
| EN 50131-2-7-1:2012/A2:2016 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-1: INTRUSION DETECTORS - GLASS BREAK DETECTORS (ACOUSTIC) |
| EN 61076-3-106 : 2006 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-106: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR PROTECTIVE HOUSINGS FOR USE WITH 8-WAY SHIELDED AND UNSHIELDED CONNECTORS FOR INDUSTRIAL ENVIRONMENTS INCORPORATING THE IEC 60603-7 SERIES INTERFACE |
| EN 13389:2005+A1:2009 | Food processing machinery - Mixers with horizontal shafts - Safety and hygiene requirements |
| DIN EN 12151:2008-05 | MACHINERY AND PLANTS FOR THE PREPARATION OF CONCRETE AND MORTAR - SAFETY REQUIREMENTS |
| EN 50303:2000 | Group I, Category M1 equipment intended to remain functional in atmospheres endangered by firedamp and/or coal dust |
| CLC/TS 50131-4:2006 | Alarm systems - Intrusion and hold-up systems - Part 4: Warning devices |
| EN 1501-3:2008 | Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 3: Front loaded refuse collection vehicles |
| EN 13463-5:2011 | Non-electrical equipment intended for use in potentially explosive atmospheres - Part 5: Protection by constructional safety 'c' |
| EN 50110-1:2013 | Operation of electrical installations - Part 1: General requirements |
| EN 50164-6:2009 | Lightning Protection Components (LPC) - Part 6: Requirements for lightning strike counters |
| DIN EN 61558-2-17 : 1998 | SAFETY OF POWER TRANSFORMERS, POWER SUPPLY UNITS AND SIMILAR - PART 2-17: PARTICULAR REQUIREMENTS FOR TRANSFORMERS FOR SWITCH MODE POWER SUPPLIES |
| DIN EN 12966-1:2010-03 | ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS - PART 1: PRODUCT STANDARD |
| DIN EN 12094-2:2003-09 | Fixed firefighting systems - Components for gas extinguishing systems - Part 2: Requirements and test methods for non-electrical automatic control and delay devices; German version EN 12094-2:2003 |
| EN 61812-1:2011 | Time relays for industrial and residential use - Part 1: Requirements and tests |
| EN 13190:2001 | Dial thermometers |
| DIN EN 15746-2:2011-12 | Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements (includes Amendment A1:2011) |
| EN 50249:2002 | Electromagnetic locators for buried pipes and cables - Performance and safety |
| EN 62282-4-101:2014 | Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks |
| HD 384.7.754 : 2005 | ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 7: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - SECTION 754: ELECTRICAL INSTALLATIONS IN CARAVANS AND MOTOR-CARAVANS |
| EN 50325-2:2000 | Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces - Part 2: DeviceNet |
| EN 50464-2-2:2007 | Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2 500 kVA with highest voltage for equipment not exceeding 36 kV - Part 2-2: Distribution transformers with cable boxes on the high-voltage and/or low-voltage side - Cable boxes type 1 for use on distribution transformers meeting the requirements of EN 50464-2-1 |
| EN 50411-2-5:2009 | Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-5: Sealed closures for air blown fibre microduct, type 1, for category S & A |
| EN 50122-1:2011/A4:2017 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRICAL SAFETY, EARTHING AND THE RETURN CIRCUIT - PART 1: PROTECTIVE PROVISIONS AGAINST ELECTRIC SHOCK |
| EN 60127-6:2014 | Miniature fuses - Part 6: Fuse-holders for miniature fuse-links |
| EN 61753-1-3:2014 | Fibre optic interconnecting devices and passive components - Performance standard - Part 1-3: General and guidance for single-mode fibre optic connector and cable assembly for industrial environment, Category I |
| EN 50131-4:2009 | Alarm systems - Intrusion and hold-up systems - Part 4: Warning devices |
| EN 50050-2:2013 | Electrostatic hand-held spraying equipment - Safety requirements - Part 2: Hand-held spraying equipment for ignitable coating powder |
| EN 50107:1998 | Signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV |
| EN 62314 : 2006 | SOLID-STATE RELAYS |
| DIN EN 13836:2007-06 | Gas-fired central heating boilers - Type B boilers of nominal heat input exceeding 300 kW, but not exceeding 1000 kW |
| EN 50017:1998 | Electrical apparatus for potentially explosive atmospheres - Powder filling "q" |
| DIN EN 12012-1:2010-02 | PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS |
| EN 12201-3:2011+A1:2012 | Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 3: Fittings |
| EN 12111:2014 | Tunnelling machines - Road headers and continuous miners - Safety requirements |
| EN 50050-1:2013 | Electrostatic hand-held spraying equipment - Safety requirements - Part 1: Hand-held spraying equipment for ignitable liquid coating materials |
| DIN EN 12067-1 : 1998 AMD 1 2003 | GAS/AIR RATIO CONTROLS FOR GAS BURNERS AND GAS BURNING APPLIANCES - PART 1: PNEUMATIC TYPES |
| EN 50545-1:2011/A1:2016 | ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF TOXIC AND COMBUSTIBLE GASES IN CAR PARKS AND TUNNELS - PART 1: GENERAL PERFORMANCE REQUIREMENTS AND TEST METHODS FOR THE DETECTION AND MEASUREMENT OF CARBON MONOXIDE AND NITROGEN OXIDES |
| EN 50617-2:2015/AC:2016 | RAILWAY APPLICATIONS - TECHNICAL PARAMETERS OF TRAIN DETECTION SYSTEMS FOR THE INTEROPERABILITY OF THE TRANS-EUROPEAN RAILWAY SYSTEM - PART 2: AXLE COUNTERS |
| EN 50227:1997 | Control circuit devices and switching elements proximity sensors, d.c. interface for proximity sensors and switching amplifiers (NAMUR) |
| EN 60601-2-62:2015 | Medical electrical equipment - Part 2-62: Particular requirements for the basic safety and essential performance of high intensity therapeutic ultrasound (HITU) equipment |
| DIN VDE 0660-501 : 1992 | SWITCHGEAR AND CONTROLGEAR; LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 4: PARTICULAR REQUIREMENTS FOR ASSEMBLIES FOR CONSTRUCTION SITES (ACS) |
| EN 12158-1:2000+A1:2010 | Builders' hoists for goods - Part 1: Hoists with accessible platforms |
| UNE-EN 809:1999 | PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS |
| EN 61020-1:2009 | Electromechanical switches for use in electrical and electronic equipment - Part 1: Generic specification |
| EN 61076-3-118 : 2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-118: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR A 4 POLE + PE POWER CONNECTOR WITH PUSH-PULL COUPLING |
| EN 50223:2015 | Stationary electrostatic application equipment for ignitable flock material - Safety requirements |
| EN 50436-1 : 2014 COR 2016 | ALCOHOL INTERLOCKS - TEST METHODS AND PERFORMANCE REQUIREMENTS - PART 1: INSTRUMENTS FOR DRINK-DRIVING-OFFENDER PROGRAMS |
| EN 50123-3:2003/A1:2013 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SWITCHGEAR - PART 3: INDOOR D.C. DISCONNECTORS, SWITCH-DISCONNECTORS AND EARTHING SWITCHES |
| EN 50300:2004 | Low-voltage switchgear and controlgear assemblies - General requirements for low-voltage substation cable distribution boards |
| EN 61095:2009 | Electromechanical contactors for household and similar purposes |
| EN 62026-7:2013 | Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 7: CompoNet |
| EN 62109-1 : 2010 | SAFETY OF POWER CONVERTERS FOR USE IN PHOTOVOLTAIC POWER SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| EN 50107-1 : 2002 AMD 1 2004 | SIGNS AND LUMINOUS-DISCHARGE-TUBE INSTALLATIONS OPERATING FROM A NO-LOAD RATED OUTPUT VOLTAGE EXCEEDING 1 KV BUT NOT EXCEEDING 10 KV - PART 1: GENERAL REQUIREMENTS |
| EN 61310-2:2008 | Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking |
| UNE-EN 415-3:2000 | Safety of packaging machines. Part 3: Form, fill and seal machines. |
| UNE-EN 1034-2:2006 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 2: Barking drums |
| ONORM EN 1010-5 : 2005 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 5: MACHINES FOR THE PRODUCTION OF CORRUGATED BOARD AND MACHINES FOR THE CONVERSION OF FLAT AND CORRUGATED BOARD |
| UNE-EN 860:2007+A2:2012 | Safety of woodworking machines - One side thickness planing machines |
| ONORM EN 12352 : 2006 | TRAFFIC CONTROL EQUIPMENT - WARNING AND SAFETY LIGHT DEVICES |
| UNE-EN 13390:2002 | Food processing machinery- Pie and tart machines - Safety and hygiene requirements. |
| I.S. EN 12953-9:2007 | SHELL BOILERS - PART 9: REQUIREMENTS FOR LIMITING DEVICES OF THE BOILER AND ACCESSORIES |
| I.S. EN 15267-3:2007 | AIR QUALITY - CERTIFICATION OF AUTOMATED MEASURING SYSTEMS - PART 3: PERFORMANCE CRITERIA AND TEST PROCEDURES FOR AUTOMATED MEASURING SYSTEMS FOR MONITORING EMISSIONS FROM STATIONARY SOURCES |
| UNE-EN 848-2:2007+A1:2010 | Safety of woodworking machines - One side moulding machines with rotating tool - Part 2: Single spindle hand fed/integrated fed routing machines |
| UNE-EN 12757-1:2006+A1:2010 | Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing |
| UNE-EN 848-2:2007 | Safety of woodworking machines - One side moulding machines with rotating tool - Part 2: Single spindle hand fed/integrated fed routing machines |
| UNE-EN 12201-3:2012 | Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 3: Fittings |
| UNE-EN 1870-17:2013 | Safety of woodworking machines - Circular sawing machines - Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit (radial arm saws) |
| UNE-EN 1501-2:2006 | Refuse collection vehicles and associated lifting devices - General requirements and safety requirements - Part 2: Side loaded refuse collection vehicles |
| UNE-EN 1673:2001 | Food procesing machinery. Rotatory rack ovens. Safety and hygiene requirements. |
| UNE-EN 1034-22:2006 | Safety of machinerie - Safety requirements for the design and construction of paper making and finishing machines - Part 22: Wood Grinders |
| UNE-EN 1854:2010 | Pressure sensing devices for gas burners and gas burning appliances |
| UNE-EN 15746-2:2011 | Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements |
| UNE-EN 12629-7:2005 | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 7: Stationary and mobile equipment for long line manufacture of prestressed products |
| OVE/ONORM EN 62093 : 2006 | BALANCE-OF-SYSTEM COMPONENTS FOR PHOTOVOLTAIC SYSTEMS - DESIGN QUALIFICATION NATURAL ENVIRONMENTS |
| I.S. EN 12255-1:2002 | WASTEWATER TREATMENT PLANTS - PART 1: GENERAL CONSTRUCTION PRINCIPLES |
| I.S. EN 13485:2002 | THERMOMETERS FOR MEASURING THE AIR AND PRODUCT TEMPERATURE FOR THE TRANSPORT, STORAGE AND DISTRIBUTION OF CHILLED, FROZEN, DEEP-FROZEN/QUICK-FROZEN FOOD AND ICE-CREAM - TESTS, PERFORMANCE, SUITABILITY |
| EN 303 978 : 2.1.2 | SATELLITE EARTH STATIONS AND SYSTEMS (SES); HARMONISED STANDARD FOR EARTH STATIONS ON MOBILE PLATFORMS (ESOMP) TRANSMITTING TOWARDS SATELLITES IN GEOSTATIONARY ORBIT, OPERATING IN THE 27,5 GHZ TO 30,0 GHZ FREQUENCY BANDS COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.2 OF THE DIRECTIVE 2014/53/EU |
| UNE-EN 12757-1:2006 | Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing |
| UNE-EN 88-1:2012 | Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 50 kPa |
| UNE-EN 1870-5:2003 | Safety of woodworking machines - Circular sawing machines - Part 5: Circular sawbenches/up-cutting cross-cut sawing machines. |
| UNE-EN 859:2008+A2:2012 | Safety of woodworking machines - Hand fed surface planing machines |
| UNE-EN 415-5:2007 | Safety of packaging machines - Part 5: Wrapping machines |
| UNE-EN 500-1:2007 | Mobile road construction machinery - Safety - Part 1: Common requirements |
| UNE-EN 12044:2006 | Footwear, leather and imitation leather goods manufacturing machines - Cutting and punching machines - Safety requirements |
| UNE-EN 1570-1:2012 | Safety requirements for lifting tables - Part 1: Lifting tables serving up to two fixed landings |
| UNE-EN 1034-14:2006 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 14: Reel splitter |
| UNE-EN 1501-1:2012 | Refuse collection vehicles - General requirements and safety requirements - Part 1: Rear loaded refuse collection vehicles |
| BS 88-1(2007) : 2007 | LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS |
| UNE-EN 1012-2:1996 | COMPRESSORS AND VACUUM PUMPS. SAFETY REQUIREMENTS. PART 2: VACUUM PUMPS. |
| UNE-EN 60974-5:2014 | Arc welding equipment - Part 5: Wire feeders |
| UNE-EN 15502-1:2013 | Gas-fired heating boilers - Part 1: General requirements and tests |
| IEC 60068-2-68:1994 | Environmental testing - Part 2-68: Tests - Test L: Dust and sand |
| IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
| IEC 60050-195:1998 | International Electrotechnical Vocabulary (IEV) - Part 195: Earthing and protection against electric shock |
| HD 384.2 : 200S2 | INTERNATIONAL ELECTROTECHNICAL VOCABULARY - ELECTRICAL INSTALLATIONS OF BUILDINGS |
| EN 60068-1:2014 | Environmental testing - Part 1: General and guidance |
| HD 540.2 : 200S1 | INSULATION COORDINATION - APPLICATION GUIDE |
| HD 323.1 : 200S2 | BASIC ENVIRONMENTAL TESTING PROCEDURES - GENERAL AND GUIDANCE |
| EN 60068-2-68:1996 | Environmental testing - Part 2: Tests - Test L: Dust and sand |
| IEC 60071-2:1996 | Insulation co-ordination - Part 2: Application guide |
| EN 60071-2:1997 | Insulation co-ordination - Part 2: Application guide |
| IEC 60050-826:2004 | International Electrotechnical Vocabulary (IEV) - Part 826: Electrical installations |
| IEC 61140:2016 | Protection against electric shock - Common aspects for installation and equipment |
| IEC 61032:1997 | Protection of persons and equipment by enclosures - Probes for verification |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.