EN 60079-0:2012/A11:2013
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED)
Superseded date
16-05-2019
Superseded by
Published date
12-01-2013
Sorry this product is not available in your region.
FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
4 Equipment grouping
5 Temperatures
6 Requirements for all electrical equipment
7 Non-metallic enclosures and non-metallic
parts of enclosures
8 Metallic enclosures and metallic parts of enclosures
9 Fasteners
10 Interlocking devices
11 Bushings
12 Materials used for cementing
13 Ex Components
14 Connection facilities and termination compartments
15 Connection facilities for earthing or bonding conductors
16 Entries into enclosures
17 Supplementary requirements for rotating machines
18 Supplementary requirements for switchgear
19 Supplementary requirements for fuses
20 Supplementary requirements for plugs, socket outlets
and connectors
21 Supplementary requirements for luminaires
22 Supplementary requirements for caplights and handlights
23 Equipment incorporating cells and batteries
24 Documentation
25 Compliance of prototype or sample with documents
26 Type tests
27 Routine tests
28 Manufacturer's responsibility
29 Marking
30 Instructions
Annex A (normative) - Supplementary requirements for
cable glands
Annex B (normative) Requirements for Ex Components
Annex C (informative) Example of rig for resistance
to impact test
Annex D (informative) Motors supplied by converters
Annex E (informative) Temperature rise testing of
electric machines
Annex F (informative) Guideline flowchart for tests
of non-metallic enclosures or nonmetallic parts
of enclosures (26.4)
Bibliography
Annex ZA (normative) - Normative references to
international publications with their
corresponding European publications
Annex ZY (informative) - Additional Information relating
to the European ATEX Directive 94/9/EC
Annex ZZ (informative) - Coverage of Essential Requirements
of EU Directives
Describes the general requirements for construction, testing and marking of electrical equipment and Ex Components intended for use in explosive atmospheres.
| Committee |
TC 31
|
| DevelopmentNote |
Supersedes EN 50014. (04/2004) Supersedes EN 61241-0. (09/2009)
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| I.S. EN 60079-0:2012 | Identical |
| SN EN 60079-0:2012+A11:2013 | Identical |
| NEN EN IEC 60079-0 : 2012 AMD 11 2013 | Identical |
| VDE 0170-1 SUPP 1 : 2014 | Identical |
| CEI EN 60079-0/A11 : 2014 | Identical |
| PN EN 60079-0 : 2013 AMD 11 2014 | Identical |
| DIN EN 60079-0 SUPP 1 : 2014 | Identical |
| BS EN 60079-0 : 2012 | Identical |
| NF EN 60079-0 : 2013 AMD 11 2014 | Identical |
| UNE-EN 60079-0:2013 | Identical |
| NBN EN 60079-0 : 2012 AMD 1 2014 | Identical |
| DIN EN 60079-0 : 2014 | Identical |
| VDE 0170-1 : 2014 | Identical |
| EN 13175:2014 | LPG Equipment and accessories - Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings |
| 11/30246684 DC : 0 | BS EN 1953 - ATOMISING AND SPRAYING EQUIPMENT FOR COATING MATERIALS - SAFETY REQUIREMENTS |
| 14/30301257 DC : 0 | BS EN 13160-3 - LEAK DETECTION SYSTEMS - PART 3: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR LIQUID SYSTEMS FOR TANKS |
| UNE-EN 60079-17:2014 | Explosive atmospheres - Part 17: Electrical installations inspection and maintenance |
| DD CLC/TS 50131-7:2010 | Alarm systems. Intrusion and hold-up systems Application guidelines |
| 09/30182356 DC : 0 | BS EN 12581:2005/A1 - COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS |
| UNE-EN ISO 18081:2017 | Non-destructive testing - Acoustic emission testing (AT) - Leak detection by means of acoustic emission (ISO 18081:2016) |
| CEN/TR 16013-3:2012 | Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 3: Evaluation of airborne particle concentrations using photometers |
| 10/30219414 DC : 0 | BS EN 13617-4 - PETROL FILLING STATIONS - PART 4: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SWIVELS FOR USE ON METERING PUMPS AND DISPENSERS |
| PREN 13952 : DRAFT 2015 | LPG EQUIPMENT AND ACCESSORIES - FILLING PROCEDURES FOR LPG CYLINDERS |
| PREN 50050-1 : DRAFT 2011 | ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 1: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE LIQUID COATING MATERIALS |
| CEI EN 61310-2 : 2008 | SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 2: REQUIREMENTS FOR MARKING |
| DIN EN 14591-4:2007-09 | Explosion prevention and protection in underground mines - Protective systems - Part 4: Automatic extinguishing systems for road headers |
| BS EN 50104:2010 | Electrical apparatus for the detection and measurement of oxygen. Performance requirements and test methods |
| BS EN 16657 : 2016 | TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - TRANSPORT TANK EQUIPMENT FOR OVERFILL PREVENTION DEVICES FOR STATIC TANKS |
| 12/30265289 DC : 0 | BS EN 12050-1 - WASTEWATER LIFTING PLANTS FOR BUILDINGS AND SITES - PART 1: LIFTING PLANTS FOR WASTEWATER CONTAINING FAECAL MATTER |
| UNI EN 1474-1 : 2009 | INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS |
| I.S. EN 60079-35-1:2011 | EXPLOSIVE ATMOSPHERES - PART 35-1: CAPLIGHTS FOR USE IN MINES SUSCEPTIBLE TO FIREDAMP - GENERAL REQUIREMENTS - CONSTRUCTION AND TESTING IN RELATION TO THE RISK OF EXPLOSION |
| PREN 1127-1 : DRAFT 2017 | EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY |
| UNE-EN 50050-2:2014 | Electrostatic hand-held spraying equipment - Safety requirements - Part 2: Hand-held spraying equipment for ignitable coating powder |
| 12/30262935 DC : 0 | BS EN 15339-4 - THERMAL SPRAYING - SAFETY REQUIREMENTS FOR THERMAL SPRAYING EQUIPMENT - PART 4: GAS AND LIQUID FUEL SUPPLY |
| 11/30248849 DC : 0 | BS EN 50050-3:2011 - ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 3: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE FLOCK |
| 12/30243081 DC : 0 | BS EN 1034-17 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 17: TISSUE MAKING MACHINES |
| 09/30198043 DC : 0 | BS EN 1127-1 - EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY |
| UNI EN 13237 : 2012 | POTENTIALLY EXPLOSIVE ATMOSPHERES - TERMS AND DEFINITIONS FOR EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
| BS EN 60695-1-10:2017 | Fire hazard testing Guidance for assessing the fire hazard of electrotechnical products. General guidelines |
| BS EN 60849:1998 | Sound systems for emergency purposes |
| I.S. EN 60079-27:2008 | EXPLOSIVE ATMOSPHERES - PART 27: FIELDBUS INTRINSICALLY SAFE CONCEPT (FISCO) |
| UNE-EN 60079-1:2015 | Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" |
| 13/30273033 DC : 0 | BS EN 1012-3 - COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS |
| EN 60079-30-1:2017 | Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements |
| CEI EN 60079-27 : 2010 | EXPLOSIVE ATMOSPHERES - PART 27: FIELDBUS INTRINSICALLY SAFE CONCEPT (FISCO) |
| 11/30239006 DC : 0 | BS EN 13237 - POTENTIALLY EXPLOSIVE ATMOSPHERES - TERMS AND DEFINITIONS FOR EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
| DIN EN ISO/IEC 80079-34:2012-03 | EXPLOSIVE ATMOSPHERES - PART 34: APPLICATION OF QUALITY SYSTEMS FOR EQUIPMENT MANUFACTURE (ISO/IEC 80079-34:2011) |
| 12/30270980 DC : 0 | BS EN 1127-2 - EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING |
| 10/30227671 DC : 0 | BS EN 14678-1 - LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS |
| BS EN 62282-3-1:2007 | Fuel cell technologies Stationary fuel cell power systems. Safety |
| CEN/TR 15339-4:2014 | Thermal spraying - Safety requirements for thermal spraying equipment - Part 4: Gas and liquid fuel supply |
| BS EN 61987-12:2016 | Industrial-process measurement and control. Data structures and elements in process equipment catalogues Lists of properties (LOPs) for flow measuring equipment for electronic data exchange |
| 05/30132844 DC : DRAFT APR 2005 | EN 15207 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - PLUG/SOCKET CONNECTION AND SUPPLY CHARACTERISTICS FOR SERVICE EQUIPMENT IN HAZARDOUS AREAS |
| BS EN 45544-1:2015 | Workplace atmospheres. Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours General requirements and test methods |
| 09/30202029 DC : 0 | BS EN 13852-1 - CRANES - OFFSHORE CRANES - PART 1: GENERAL-PURPOSE OFFSHORE CRANES |
| PREN 12405-3 : DRAFT 2013 | GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER |
| UNE-EN 60079-10-1:2016 | Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres |
| BS EN 61285:2015 | Industrial-process control. Safety of analyzer houses |
| 08/30173506 DC : DRAFT JAN 2008 | BS EN 1539 - DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS |
| DIN EN 12405-3:2016-04 | Gas meters - Conversion devices - Part 3: Flow computer |
| CEI EN 50104 : 2011 | ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF OXYGEN - PERFORMANCE REQUIREMENTS AND TEST METHODS |
| CEI EN 50495 : 2011 | SAFETY DEVICES REQUIRED FOR THE SAFE FUNCTIONING OF EQUIPMENT WITH RESPECT TO EXPLOSION RISKS |
| EN 15339-2:2007 | Thermal spraying - Safety requirements for thermal spraying equipment - Part 2: Gas control units |
| I.S. EN 50628:2016 | ERECTION OF ELECTRICAL INSTALLATIONS IN UNDERGROUND MINES |
| I.S. EN 50176:2009 | STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE LIQUID COATING MATERIAL - SAFETY REQUIREMENTS |
| I.S. EN 60079-30-2:2017 | EXPLOSIVE ATMOSPHERES - PART 30-2: ELECTRICAL RESISTANCE TRACE HEATING - APPLICATION GUIDE FOR DESIGN, INSTALLATION AND MAINTENANCE |
| I.S. EN 1012-3:2013 | COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS |
| I.S. EN 415-10:2014 | SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS |
| I.S. EN 62282-5-1:2012 | FUEL CELL TECHNOLOGIES - PART 5-1: PORTABLE FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-5-1:2012 (EQV)) |
| PREN 13012 : DRAFT 2010 | PETROL FILLING STATIONS - CONSTRUCTION AND PERFORMANCE OF AUTOMATIC NOZZLES FOR USE ON FUEL DISPENSERS |
| CEI EN 61285 : 2016 | INDUSTRIAL-PROCESS CONTROL - SAFETY OF ANALYZER HOUSES |
| UNI EN 13175 : 2015 | LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS |
| BS EN 60079-19 : 2011 | EXPLOSIVE ATMOSPHERES - PART 19: EQUIPMENT REPAIR, OVERHAUL AND RECLAMATION |
| S.R. CEN/TR 15339-4:2014 | THERMAL SPRAYING - SAFETY REQUIREMENTS FOR THERMAL SPRAYING EQUIPMENT - PART 4: GAS AND LIQUID FUEL SUPPLY |
| I.S. EN 60079-15:2010 | EXPLOSIVE ATMOSPHERES - PART 15: EQUIPMENT PROTECTION BY TYPE OF PROTECTION 'N' |
| I.S. EN 50174-2:2009 | INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 2: INSTALLATION PLANNING AND PRACTICES INSIDE BUILDINGS |
| BS EN 12405-1 : 2005 | GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| I.S. EN 1474-1:2008 | INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS |
| S.R. CEN/TR 16787:2014 | INDUSTRIAL GAS INSTALLATION - GUIDELINE |
| I.S. EN 13175:2014 | LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS |
| I.S. EN 15714-2:2009 | INDUSTRIAL VALVES - ACTUATORS - PART 2: ELECTRIC ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| BS EN 62013-1:2006 | Caplights for use in mines susceptible to firedamp General requirements. Construction and testing in relation to the risk of explosion |
| CEI EN 60079-32-2 : 2016 | EXPLOSIVE ATMOSPHERES - PART 32-2: ELECTROSTATICS HAZARDS - TESTS |
| EN 16657:2016 | Tanks for the transport of dangerous goods - Transport tank equipment for overfill prevention devices for static tanks |
| PD CLC/TR 60079-32-1:2015 | Explosive atmospheres Electrostatic hazards, guidance |
| I.S. EN 1034-17:2012 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 17: TISSUE MAKING MACHINES |
| CEI EN 60079-29-4 : 2011 | EXPLOSIVE ATMOSPHERES - PART 29-4: GAS DETECTORS - PERFORMANCE REQUIREMENTS OF OPEN PATH DETECTORS FOR FLAMMABLE GASES |
| UNE-EN 50050-3:2014 | Electrostatic hand-held spraying equipment - Safety requirements - Part 3: Hand-held spraying equipment for ignitable flock |
| 17/30356734 DC : 0 | BS EN 14236 - ULTRASONIC DOMESTIC GAS METERS |
| 17/30365866 DC : 0 | BS EN 1127-1 - EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY |
| UNI EN 12405-1 : 2010 | GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| I.S. EN 61241-11:2007 | ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 11: PROTECTION BY INTRINSIC SAFETY "ID" |
| EN 12261:2018 | Gas meters - Turbine gas meters |
| I.S. EN 16009:2011 | FLAMELESS EXPLOSION VENTING DEVICES |
| EN 60079-19:2011/A1:2015 | EXPLOSIVE ATMOSPHERES - PART 19: EQUIPMENT REPAIR, OVERHAUL AND RECLAMATION (IEC 60079-19:2010) |
| EN 13617-1:2012 | Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units |
| EN 378-3:2016 | Refrigerating systems and heat pumps - Safety and environmental requirements - Part 3: Installation site and personal protection |
| DIN EN 1804-3:2010-05 | Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3: Hydraulic control systems (includes Amendment A1:2010) |
| EN IEC 60079-7:2015/A1:2018 | EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E' (IEC 60079-7:2015/A1:2017) |
| DIN EN 13355:2010-06 | COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS |
| DIN EN 1473:2016-10 | Installation and equipment for liquefied natural gas - Design of onshore installations |
| EN 13617-4:2012 | Petrol filling stations - Part 4: Safety requirements for construction and performance of swivels for use on metering pumps and dispensers |
| BS EN 1755:2015 | Industrial Trucks. Safety requirements and verification. Supplementary requirements for operation in potentially explosive atmospheres |
| UNE-EN 13617-2:2012 | Petrol filling stations - Part 2: Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers |
| UNE-EN 13617-4:2012 | Petrol filling stations - Part 4: Safety requirements for construction and performance of swivels for use on metering pumps and dispensers |
| BS EN 13463-1:2009 | Non-electrical equipment for use in potentially explosive atmospheres Basic method and requirements |
| BS EN 13160-1:2003 | Leak detection systems General principles |
| UNE-EN 1127-1:2012 | Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology |
| BS EN 50174-2 : 2009 | INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 2: INSTALLATION PLANNING AND PRACTICES INSIDE BUILDINGS |
| BS EN 14797:2006 | Explosion venting devices |
| BS EN 13617-3:2012 | Petrol filling stations Safety requirements for construction and performance of shear valves |
| BS EN 60079-18 : 2015 | EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION 'M' |
| BS EN 12921-1 : 2005 | MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 1: COMMON SAFETY REQUIREMENTS |
| BS EN 13463-3:2005 | Non-electrical equipment for use in potentially explosive atmospheres Protection by flameproof enclosure \'d\' |
| DIN EN 1127-2:2002-07 | EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING |
| I.S. EN 12583:2014 | GAS INFRASTRUCTURE - COMPRESSOR STATIONS - FUNCTIONAL REQUIREMENTS |
| CLC/TR 60079-33:2015 | Explosive atmospheres - Part 33: Equipment protection by special protection 's' |
| EN 12753:2005+A1:2010 | Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety requirements |
| EN 60695-1-10:2017 | Fire hazard testing - Part 1-10: Guidance for assessing the fire hazard of electrotechnical products - General guidelines |
| DIN EN 137:2007-01 | RESPIRATORY PROTECTIVE DEVICES - SELF-CONTAINED OPEN-CIRCUIT COMPRESSED AIR BREATHING APPARATUS WITH FULL FACE MASK - REQUIREMENTS, TESTING, MARKING |
| EN 60079-25:2010/AC:2013 | EXPLOSIVE ATMOSPHERES - PART 25: INTRINSICALLY SAFE ELECTRICAL SYSTEMS (IEC 60079-25:2010) |
| EN 1034-17:2012 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 17: Tissue making machines |
| EN 62013-1:2006 | Caplights for use in mines susceptible to firedamp - Part 1: General requirements - Construction and testing in relation to the risk of explosion |
| EN 62282-3-1 : 2007 | FUEL CELL TECHNOLOGIES - PART 3-1: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY |
| DIN EN 14797:2007-03 | Explosion venting devices |
| DIN EN 13922:2011-11 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - OVERFILL PREVENTION SYSTEMS FOR LIQUID FUELS |
| EN 13463-1:2009 | Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements |
| DIN EN 12312-5:2009-08 | Aircraft ground support equipment - Specific requirements - Part 5: Aircraft fuelling equipment (includes Amendment A1:2009) |
| EN 13463-6:2005 | Non-electrical equipment for use in potentially explosive atmospheres - Part 6: Protection by control of ignition source 'b' |
| EN 12050-1:2015 | Wastewater lifting plants for buildings and sites - Part 1: Lifting plants for wastewater containing faecal matter |
| EN 50176:2009 | Stationary electrostatic application equipment for ignitable liquid coating material - Safety requirements |
| EN 1010-1:2004+A1:2010 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements |
| EN 13237:2012 | Potentially explosive atmospheres - Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres |
| EN 16191:2014 | Tunnelling machinery - Safety requirements |
| EN 50177:2009/A1:2012 | STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE COATING POWDERS - SAFETY REQUIREMENTS |
| EN 61987-12:2016 | Industrial- Process Measurement and Control - Data Structures and Elements in Process Equipment Catalogues - Part 12: Lists of properties (LOPs) for flow measuring equipment for electronic data exchange |
| EN 60034-30-1:2014 | Rotating electrical machines - Part 30-1: Efficiency classes of line operated AC motors (IE code) |
| EN 12779:2015 | Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements |
| EN 13160-3:2016 | Leak detection systems - Part 3: Requirements and test/assessment methods for liquid systems for tanks |
| EN 13463-3:2005 | Non-electrical equipment for use in potentially explosive atmospheres - Part 3: Protection by flameproof enclosure 'd' |
| EN 61987-13:2016 | Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 13: Lists of properties (LOP) for Pressure Measuring Equipment for electronic data exchange |
| EN 12621:2006+A1:2010 | Machinery for the supply and circulation of coating materials under pressure - Safety requirements |
| EN 60079-28:2015 | Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation |
| EN 1248:2001+A1:2009 | Foundry machinery - Safety requirements for abrasive blasting equipment |
| EN 60079-29-4:2010 | Explosive atmospheres - Part 29-4: Gas detectors - Performance requirements of open path detectors for flammable gases |
| EN 60079-32-2:2015 | Explosive atmospheres - Part 32-2: Electrostatics hazards - Tests |
| EN 60079-31:2014 | Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t" |
| EN 50495:2010 | Safety devices required for the safe functioning of equipment with respect to explosion risks |
| EN 12921-1:2005+A1:2010 | Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements |
| EN 12215:2004+A1:2009 | Coating plants - Spray booths for application of organic liquid coating materials - Safety requirements |
| EN 12757-1:2005+A1:2010 | Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing |
| EN 62952-1:2016 | Power sources for a wireless communication device - Part 1: General requirements of power modules |
| EN 13355:2004+A1:2009 | Coating plants - Combined booths - Safety requirements |
| EN 60079-27:2008 | Explosive atmospheres - Part 27: Fieldbus intrinsically safe concept (FISCO) |
| EN 13160-1:2016 | Leak detection systems - Part 1: General Principles |
| EN 50050-3:2013 | Electrostatic hand-held spraying equipment - Safety requirements - Part 3: Hand-held spraying equipment for ignitable flock |
| DIN EN 14492-2:2010-05 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| EN 60702-2:2002/A1:2015 | MINERAL INSULATED CABLES AND THEIR TERMINATIONS WITH A RATED VOLTAGE NOT EXCEEDING 750 V - PART 2: TERMINATIONS (IEC 60702-2:2002/A1:2015) |
| EN 62798:2014/AC:2014 | INDUSTRIAL ELECTROHEATING EQUIPMENT - TEST METHODS FOR INFRARED EMITTERS (IEC 62798:2014) |
| OVE/ONORM EN 60079-29-1 : 2008 | EXPLOSIVE ATMOSPHERES - PART 29-1: GAS DETECTORS - PERFORMANCE REQUIREMENTS OF DETECTORS FOR FLAMMABLE GASES |
| BS EN 16299:2013 | Cathodic protection of external surfaces of above ground storage tankbases in contact with soil or foundations |
| UNE-EN 50495:2010 | Safety devices required for the safe functioning of equipment with respect to explosion risks |
| BS EN 62282-5-1:2012 | Fuel cell technologies Portable fuel cell power systems. Safety |
| CEI EN 60079-13 : 2011 | EXPLOSIVE ATMOSPHERES - PART 13: EQUIPMENT PROTECTION BY PRESSURIZED ROOMS 'P' |
| I.S. EN 62282-3-1:2007 | FUEL CELL TECHNOLOGIES - PART 3-1: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY |
| BS EN 61987-13:2016 | Industrial-process measurement and control. Data structures and elements in process equipment catalogues Lists of properties (LOP) for Pressure Measuring Equipment for electronic data exchange |
| 13/30274904 DC : 0 | BS EN 14154-4 - WATER METERS - PART 4: ADDITIONAL FUNCTIONALITIES |
| PREN 12405-1 : DRAFT 2017 | GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| UNI EN ISO 8230-3 : 2009 | SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 3: MACHINES USING COMBUSTIBLE SOLVENTS |
| 11/30247811 DC : 0 | BS EN 415-10 - SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS |
| 11/30248842 DC : 0 | BS EN 50050-1:2011 - ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 1: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE LIQUID COATING MATERIALS |
| UNI EN 14116 : 2014 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - DIGITAL INTERFACE FOR PRODUCT RECOGNITION DEVICES FOR LIQUID FUELS |
| EN 60079-29-1:2016 | Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases |
| 11/30248021 DC : 0 | AEROSPACE SERIES - COPPER ALLOY CUBE 1.9 - SOLUTION TREATED, COLD WORKED TO [1/2] HARD AND PRECIPITATION TREATED - BAR - 5 MM <= A OR D <= 190 MM - R[M] >= 1220 MPA |
| I.S. EN 13463-6:2005 | NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 6: PROTECTION BY CONTROL OF IGNITION SOURCE 'B' |
| PREN 1672-1 : DRAFT 2012 | FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS |
| I.S. EN 60079-28:2015 | EXPLOSIVE ATMOSPHERES - PART 28: PROTECTION OF EQUIPMENT AND TRANSMISSION SYSTEMS USING OPTICAL RADIATION |
| EI TP PETROLEUM ROAD TANKER : 2010 | PETROLEUM ROAD TANKER DESIGN AND CONSTRUCTION |
| BS EN 60079-29-2:2015 | Explosive atmospheres Gas detectors. Selection, installation, use and maintenance of detectors for flammable gases and oxygen |
| CEN/TR 16787:2014 | Industrial Gas Installation - Guideline |
| 04/30115023 DC : DRAFT JUL 2004 | CLC TR 50427 - ASSESSMENT OF INADVERTENT IGNITION OF FLAMMABLE ATMOSPHERES BY RADIO-FREQUENCY RADIATION - GUIDE |
| S.R. CEN/TR 16013-3:2012 | WORKPLACE EXPOSURE - GUIDE FOR THE USE OF DIRECT-READING INSTRUMENTS FOR AEROSOL MONITORING - PART 3: EVALUATION OF AIRBORNE PARTICLE CONCENTRATIONS USING PHOTOMETERS |
| BS EN ISO/IEC 80079-34:2011 | Explosive atmospheres Application of quality systems for equipment manufacture |
| I.S. EN 60079-25:2010 | EXPLOSIVE ATMOSPHERES - PART 25: INTRINSICALLY SAFE ELECTRICAL SYSTEMS (IEC 60079-25:2010 (EQV)) |
| 08/30180312 DC : DRAFT MAR 2008 | BS EN 50223 - STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE FLOCK MATERIAL - SAFETY REQUIREMENTS |
| PD CEN/TR 16013-3:2012 | Workplace exposure. Guide for the use of direct-reading instruments for aerosol monitoring Evaluation of airborne particle concentrations using photometers |
| I.S. EN 14116:2012 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - DIGITAL INTERFACE FOR PRODUCT RECOGNITION DEVICES FOR LIQUID FUELS |
| 12/30259421 DC : 0 | BS EN 1672-1 - FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS |
| 14/30301251 DC : 0 | BS EN 13160-1 - LEAK DETECTION SYSTEMS - PART 1: GENERAL PRINCIPLES |
| CEN/TR 15339-6:2014 | Thermal spraying - Safety requirements for thermal spraying equipment - Part 6: Spray booth, Handling system, Dust collection, Exhaust system, Filter |
| UNI EN 16191 : 2014 | TUNNELLING MACHINERY - SAFETY REQUIREMENTS |
| BS EN 60079-27:2008 | Explosive atmospheres Fieldbus intrinsically safe concept (FISCO) |
| UNE-EN 60079-29-4:2011 | Explosive atmospheres -- Part 29-4: Gas detectors - Performance requirements of open path detectors for flammable gases |
| 10/30230365 DC : 0 | BS EN 50050-2 - ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT SAFETY REQUIREMENTS - PART 2: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE COATING POWDER |
| EN 60079-13:2017 | Explosive atmospheres - Part 13: Equipment protection by pressurized room "p" and artificially ventilated room "v" |
| 11/30235009 DC : 0 | BS EN 13852-1 - CRANES - OFFSHORE CRANES - PART 1: GENERAL PURPOSE OFFSHORE CRANES |
| PREN 1953 : DRAFT 2011 | ATOMISING AND SPRAYING EQUIPMENT FOR COATING MATERIALS - SAFETY REQUIREMENTS |
| BS EN 61987-14:2016 | Industrial-process measurement and control. Data structures and elements in process equipment catalogues Lists of properties (LOP) for temperature measuring equipment for electronic data exchange |
| BS EN 16191:2014 | Tunnelling machinery. Safety requirements |
| BS EN 50223:2015 | Stationary electrostatic application equipment for ignitable flock material. Safety requirements |
| UNE-EN 50104:2011 | Electrical apparatus for the detection and measurement of oxygen - Performance requirements and test methods |
| BS EN 15268:2008 | Petrol filling stations. Safety requirements for the construction of submersible pump assemblies |
| 13/30286132 DC : 0 | BS EN 13616-2 - OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID FUELS - REQUIREMENTS AND TEST/ASSESSMENT METHODS - PART 2: OVERFILL PREVENTION DEVICES WITHOUT CLOSURE DEVICE |
| CEI EN 50176 : 2010 | STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE LIQUID COATING MATERIAL - SAFETY REQUIREMENTS |
| 05/30127970 DC : DRAFT JAN 2005 | EN 1127-1 - EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY |
| S.R. CLC/TS 50131-7:2010 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 7: APPLICATION GUIDELINES |
| UNE-EN 12405-3:2016 | Gas meters - Conversion devices - Part 3: Flow computer |
| EN 50174-2 : 2009 AMD 2 2014 | INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 2: INSTALLATION PLANNING AND PRACTICES INSIDE BUILDINGS |
| UNI EN 16009 : 2011 | FLAMELESS EXPLOSION VENTING DEVICES |
| PREN 14986 : DRAFT 2014 | DESIGN OF FANS WORKING IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
| PREN 1539 : DRAFT 2012 | DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS |
| DIN EN 14116:2014-12 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - DIGITAL INTERFACE FOR PRODUCT RECOGNITION DEVICES FOR LIQUID FUELS |
| 18/30369304 DC : DRAFT APR 2018 | BS EN 1473 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS |
| UNE-EN 60079-31:2016 | Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t" |
| BS EN 60079-7 : 2015 | EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E' (IEC 60079-7:2015) |
| UNE-EN 60079-29-1:2017 | Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases |
| S.R. CLC/TR 60079-32-1:2015 | EXPLOSIVE ATMOSPHERES - PART 32-1: ELECTROSTATIC HAZARDS - GUIDANCE |
| CEI EN 60079-30-1 : 2008 | EXPLOSIVE ATMOSPHERES - PART 30-1: ELECTRICAL RESISTANCE TRACE HEATING - GENERAL AND TESTING REQUIREMENTS |
| I.S. EN 62013-1:2006 | CAPLIGHTS FOR USE IN MINES SUSCEPTIBLE TO FIREDAMP - PART 1: GENERAL REQUIREMENTS - CONSTRUCTION AND TESTING IN RELATION TO THE RISK OF EXPLOSION |
| BS EN 50177 : 2009 | STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE COATING POWDERS - SAFETY REQUIREMENTS |
| I.S. EN ISO/IEC 80079-34:2011 | EXPLOSIVE ATMOSPHERES - PART 34: APPLICATION OF QUALITY SYSTEMS FOR EQUIPMENT MANUFACTURE |
| UNI EN 15268 : 2009 | PETROL FILLING STATIONS - SAFETY REQUIREMENTS FOR THE CONSTRUCTION OF SUBMERSIBLE PUMP ASSEMBLIES |
| I.S. EN 50050:2006 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT |
| CEI EN 60695-1-10 : 2012 | FIRE HAZARD TESTING - PART 1-10: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - GENERAL GUIDELINES |
| CEI EN 60079-25 : 2012 | EXPLOSIVE ATMOSPHERES - PART 25: INTRINSICALLY SAFE ELECTRICAL SYSTEMS |
| CEI EN 50174-3 : 2014 | INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS |
| BS EN 61310-2:2008 | Safety of machinery. Indication, marking and actuation Requirements for marking |
| I.S. EN 50177:2009 | STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE COATING POWDERS - SAFETY REQUIREMENTS |
| 16/30341165 DC : 0 | BS EN 14492-2 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| CEI EN 60079-15 : 2012 | EXPLOSIVE ATMOSPHERES - PART 15: EQUIPMENT PROTECTION BY TYPE OF PROTECTION 'N' |
| EN 13012:2012 | Petrol filling stations - Construction and performance of automatic nozzles for use on fuel dispensers |
| BS EN 13175:2014 | LPG Equipment and accessories. Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings |
| EN 14236:2007 | Ultrasonic domestic gas meters |
| IEC TR 61831:2011 | On-line analyser systems - Guide to design and installation |
| I.S. EN 14591-4:2007 | EXPLOSION PREVENTION AND PROTECTION IN UNDERGROUND MINES - PROTECTIVE SYSTEMS - PART 4: AUTOMATIC EXTINGUISHING SYSTEMS FOR ROAD HEADERS |
| I.S. EN 15268:2008 | PETROL FILLING STATIONS - SAFETY REQUIREMENTS FOR THE CONSTRUCTION OF SUBMERSIBLE PUMP ASSEMBLIES |
| I.S. EN 12261:2002 | GAS METERS - TURBINE GAS METERS |
| I.S. EN 14492-2:2006 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| DIN EN 12779:2016-03 | Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements |
| DIN EN 1010-1:2011-06 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements (includes Amendment A1:2010) |
| DIN EN 12215:2010-06 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS |
| DIN EN 12941:2009-02 | RESPIRATORY PROTECTIVE DEVICES - POWERED FILTERING DEVICES INCORPORATING A HELMET OR A HOOD - REQUIREMENTS, TESTING, MARKING |
| DIN EN 12942:2009-02 | RESPIRATORY PROTECTIVE DEVICES - POWER ASSISTED FILTERING DEVICES INCORPORATING FULL FACE MASKS, HALF MASKS OR QUARTER MASKS - REQUIREMENTS, TESTING, MARKING |
| DIN EN 12621:2011-07 | Machinery for the supply and circulation of coating materials under pressure - Safety requirements (includes Amendment A1:2010) |
| DIN EN 1012-1:2011-02 | Compressors and vacuum pumps - Safety requirements - Part 1: Air compressors |
| DIN EN 12581:2011-02 | Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements (includes Amendment A1:2010) |
| DIN EN 12981:2010-06 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS |
| NF EN 13922 : 2011 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - OVERFILL PREVENTION SYSTEMS FOR LIQUID FUELS |
| DIN EN 13617-4:2012-05 | Petrol filling stations - Part 4: Safety requirements for construction and performance of swivels for use on metering pumps and dispensers |
| DIN EN 13617-3:2012-05 | Petrol filling stations - Part 3: Safety requirements for construction and performance of shear valves |
| DIN EN 13617-1:2012-08 | Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units |
| DIN EN 14681:2010-10 | Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces (includes Amendment A1:2010) |
| DIN EN 14236:2008-06 | ULTRASONIC DOMESTIC GAS METERS |
| BS EN 12981 : 2005 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS |
| UNE-EN 13799:2012 | LPG equipment and accessories - Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels |
| BS EN 13355 : 2004 | COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS |
| 17/30362889 DC : 0 | BS EN 13175 - LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS |
| BS EN 12757-1 : 2005 | MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING |
| I.S. EN 14492-1:2006 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| I.S. EN 15207:2014 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - PLUG/SOCKET CONNECTION AND SUPPLY CHARACTERISTICS FOR SERVICE EQUIPMENT IN HAZARDOUS AREAS WITH 24 V NOMINAL SUPPLY VOLTAGE |
| I.S. EN 14678-1:2013 | LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS |
| I.S. EN 1248:2001 | FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR ABRASIVE BLASTING EQUIPMENT |
| I.S. EN 13952:2017 | LPG EQUIPMENT AND ACCESSORIES - FILLING OPERATIONS FOR LPG CYLINDERS |
| I.S. EN 1012-1:2010 | COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 1: AIR COMPRESSORS |
| UNI EN 1804-3 : 2010 | MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 3: HYDRAULIC CONTROL SYSTEMS |
| I.S. EN 1804-3:2006 | MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 3: HYDRAULIC CONTROL SYSTEMS |
| DIN EN 1755:2016-02 | Industrial Trucks - Safety requirements and verification - Supplementary requirements for operation in potentially explosive atmospheres |
| DIN EN 1248:2010-06 | Foundry machinery - Safety requirements for abrasive blasting equipment (includes Amendment A1:2009) |
| I.S. EN 137:2006 | RESPIRATORY PROTECTIVE DEVICES - SELF-CONTAINED OPEN-CIRCUIT COMPRESSED AIR BREATHING APPARATUS WITH FULL FACE MASK - REQUIREMENTS, TESTING, MARKING |
| I.S. EN 13237:2012 | POTENTIALLY EXPLOSIVE ATMOSPHERES - TERMS AND DEFINITIONS FOR EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
| I.S. EN 13012:2012 | PETROL FILLING STATIONS - CONSTRUCTION AND PERFORMANCE OF AUTOMATIC NOZZLES FOR USE ON FUEL DISPENSERS |
| I.S. EN 12757-1:2005 | MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING |
| DIN EN 1473:1997-11 | INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS |
| I.S. EN 12215:2004 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS |
| I.S. EN 13617-4:2012 | PETROL FILLING STATIONS - PART 4: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SWIVELS FOR USE ON METERING PUMPS AND DISPENSERS |
| I.S. EN 60079-11:2012 | EXPLOSIVE ATMOSPHERES - PART 11: EQUIPMENT PROTECTION BY INTRINSIC SAFETY 'I' |
| DIN EN 1127-1:2011-10 | EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY |
| DIN EN 14492-1:2010-06 | Cranes - Power driven winches and hoists - Part 1: Power driven winches (includes Amendment A1:2009) |
| I.S. EN 13799:2012 | LPG EQUIPMENT AND ACCESSORIES - CONTENTS GAUGES FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSELS |
| I.S. EN 1127-2:2014 | EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING |
| DIN EN 12583:2000-11 | GAS INFRASTRUCTURE - COMPRESSOR STATIONS - FUNCTIONAL REQUIREMENTS |
| I.S. EN 13160-3:2016 | LEAK DETECTION SYSTEMS - PART 3: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR LIQUID SYSTEMS FOR TANKS |
| I.S. EN 13852-1:2013 | CRANES - OFFSHORE CRANES - PART 1: GENERAL - PURPOSE OFFSHORE CRANES |
| I.S. EN 12981:2005 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS |
| I.S. EN 12921-3:2005 | MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 3: SAFETY OF MACHINES USING FLAMMABLE CLEANING LIQUIDS |
| I.S. EN 12621:2006 | MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS |
| DIN EN 13852-2:2005-03 | Cranes - Offshore cranes - Part 2: Floating cranes |
| DIN EN 13463-1:2009-07 | NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 1: BASIC METHOD AND REQUIREMENTS |
| I.S. EN 14681:2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES |
| I.S. EN 13160-1:2016 | LEAK DETECTION SYSTEMS - PART 1: GENERAL PRINCIPLES |
| I.S. EN 378-3:2016 | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 3: INSTALLATION SITE AND PERSONAL PROTECTION |
| I.S. EN 1539:2015 | DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS |
| I.S. EN 1755:2015 | INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - SUPPLEMENTARY REQUIREMENTS FOR OPERATION IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
| I.S. EN 13355:2005 | COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS |
| I.S. EN 13617-2:2012 | PETROL FILLING STATIONS - PART 2: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SAFE BREAKS FOR USE ON METERING PUMPS AND DISPENSERS |
| EN 60079-10-1:2015 | Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres |
| I.S. EN 12312-5:2005 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 5: AIRCRAFT FUELLING EQUIPMENT |
| DIN EN 1539:2016-02 | DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS |
| I.S. EN 12779:2015 | SAFETY OF WOODWORKING MACHINES - CHIP AND DUST EXTRACTION SYSTEMS WITH FIXED INSTALLATION - SAFETY RELATED PERFORMANCES AND SAFETY REQUIREMENTS |
| I.S. EN 13617-1:2012 | PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS |
| I.S. EN 1473:2016 | INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS |
| EN 12312-5:2005+A1:2009 | Aircraft ground support equipment - Specific requirements - Part 5: Aircraft fuelling equipment |
| EN 60079-14:2014/AC:2016 | EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION (IEC 60079-14:2013/COR1:2016) |
| EN 60079-15:2010 | Explosive atmospheres - Part 15: Equipment protection by type of protection "n" |
| DIN EN 15339-2:2007-06 | Thermal spraying - Safety requirements for thermal spraying equipment - Part 2: Gas control units |
| I.S. EN 1010-1:2005 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS |
| EN 1804-3:2006+A1:2010 | Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3: Hydraulic control systems |
| I.S. EN 1953:2013 | ATOMISING AND SPRAYING EQUIPMENT FOR COATING MATERIALS - SAFETY REQUIREMENTS |
| I.S. EN 12753:2005 | THERMAL CLEANING SYSTEMS FOR EXHAUST GAS FROM SURFACE TREATMENT EQUIPMENT - SAFETY REQUIREMENTS |
| I.S. EN 14986:2017 | DESIGN OF FANS WORKING IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
| DIN EN 13463-6:2005-07 | NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 6: PROTECTION BY CONTROL OF IGNITION SOURCE 'B' |
| I.S. EN 12921-1:2005 | MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 1: COMMON SAFETY REQUIREMENTS |
| I.S. EN 12050-1:2015 | WASTEWATER LIFTING PLANTS FOR BUILDINGS AND SITES - PART 1: LIFTING PLANTS FOR WASTEWATER CONTAINING FAECAL MATTER |
| I.S. EN 13617-3:2012 | PETROL FILLING STATIONS - PART 3: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SHEAR VALVES |
| I.S. EN 12581:2006 | COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS |
| EN 45544-1:2015 | Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 1: General requirements and test methods |
| VDI/VDE 3518 Blatt 1:2011-05 | Multigas sensors - Terms, configuration, function and classification |
| VDI 4631:2011-02 | Quality criteria for biogas plants |
| VDI 2263 Blatt 7:2010-07 | Dust fires and dust explosions - Hazards - assessment - protective measures - Dust fires and explosion protection in spraying and drying integrated equipment |
| VDI 2263 Blatt 8.1:2011-03 | Dust fires and dust explosions - Hazards - assessment - protective measures - Fire and explosion protection on elevators - Examples |
| VDI 2263 Blatt 5.1:2014-10 | Dust fires and dust explosions - Hazards, assessment, protective measures - Explosion protection in fluid bed dryers - Hints and examples of operation |
| VDI 2262 Blatt 1:2013-06 | Workplace air - Reduction of exposure to air pollutants - Legal principles, terms and definitions, basic organisational measures for industrial safety and environmental protection |
| VDI 2263 Blatt 6:2017-08 | Dust fires and dust explosions - Hazards - assessment - protective measures - Dust fires and explosion protection in dust extracting installations |
| VDI/VDE 3515:2007-12 | Multi-contact plug system for electrodes used in process analysis technology |
| UNE-EN 13616-1:2016 | Overfill prevention devices for static tanks for liquid fuels - Part 1: Overfill prevention devices with closure device |
| CEI EN 50050-2 : 2014 | ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 2: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE COATING POWDER |
| PREN 50223 : DRAFT 2013 | STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE FLOCK MATERIAL - SAFETY REQUIREMENTS |
| 10/30219402 DC : 0 | BS EN 13012 - PETROL FILLING STATIONS - CONSTRUCTION AND PERFORMANCE OF AUTOMATIC NOZZLES FOR USE ON FUEL DISPENSERS |
| 12/30262932 DC : 0 | BS EN 15339-3 - THERMAL SPRAYING - SAFETY REQUIREMENTS FOR THERMAL SPRAYING EQUIPMENT - PART 3: TORCHES FOR THERMAL SPRAYING AND THEIR CONNECTION AND SUPPLY UNITS |
| 13/30284894 DC : 0 | BS EN 50223 - STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE FLOCK MATERIAL - SAFETY REQUIREMENTS |
| 15/30320786 DC : 0 | BS EN 13952 - LPG EQUIPMENT AND ACCESSORIES - FILLING PROCEDURES FOR LPG CYLINDERS |
| 13/30257895 DC : 0 | BS EN 1755 - SAFETY OF INDUSTRIAL TRUCKS - OPERATION IN POTENTIALLY EXPLOSIVE ATMOSPHERES - USE IN FLAMMABLE GAS, VAPOUR, MIST AND DUST |
| 13/30289289 DC : 0 | BS EN 12405-3 - GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER |
| PREN 14678-1 : DRAFT 2010 | LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS |
| BS EN 14677:2008 | Safety of machinery. Secondary steelmaking. Machinery and equipment for treatment of liquid steel |
| BS EN 50050-2:2013 | Electrostatic hand-held spraying equipment. Safety requirements Hand-held spraying equipment for ignitable coating powder |
| PREN 12941 : DRAFT 2016 | RESPIRATORY PROTECTIVE DEVICES - POWERED FILTERING DEVICES INCORPORATING A LOOSE FITTING RESPIRATORY INTERFACE - REQUIREMENTS, TESTING, MARKING |
| I.S. EN 12942:1999 | RESPIRATORY PROTECTIVE DEVICES - POWER ASSISTED FILTERING DEVICES INCORPORATING FULL FACE MASKS, HALF MASKS OR QUARTER MASKS - REQUIREMENTS, TESTING, MARKING |
| PREN 1473 : DRAFT 2018 | INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS |
| BS EN 60079-31:2014 | Explosive atmospheres Equipment dust ignition protection by enclosure \'t\' |
| PREN 13617-1 : DRAFT 2010 | PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS |
| 14/30300117 DC : 0 | BS EN 13175 - LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS |
| 13/30277474 DC : 0 | BS EN 16657 - TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - TRANSPORT TANK EQUIPMENT FOR OVERFILL PREVENTION DEVICES FOR STATIC TANKS |
| PD IEC/TR 61831:2011 | On-line analyser systems. Guide to design and installation |
| UNE-EN 16657:2016 | Tanks for the transport of dangerous goods - Transport tank equipment for overfill prevention devices for static tanks |
| 09/30175678 DC : 0 | BS EN 14681:2006/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES |
| DIN EN 14677:2008-11 | SAFETY OF MACHINERY - SECONDARY STEEL MAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL |
| 12/30260552 DC : 0 | BS EN 50174-3:201X - INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS |
| CLC/TR 50427:2004 | Assessment of inadvertent ignition of flammable atmospheres by radio-frequency radiation - Guide |
| PREN 14492-1 : DRAFT 2015 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| BS EN 60079-10-2:2015 | Explosive atmospheres Classification of areas. Explosive dust atmospheres |
| 12/30258755 DC : 0 | BS EN 1539 - DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS |
| BS EN 60079-17:2014 | Explosive atmospheres Electrical installations inspection and maintenance |
| BS EN 62798:2014 | Industrial electroheating equipment. Test methods for infrared emitters |
| EN 1473:2016 | Installation and equipment for liquefied natural gas - Design of onshore installations |
| NF EN 50495 : 2010 | SAFETY DEVICES REQUIRED FOR THE SAFE FUNCTIONING OF EQUIPMENT WITH RESPECT TO EXPLOSION RISKS |
| 10/30219405 DC : 0 | BS EN 13617-1 - PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS |
| CEI EN 60079-17 : 2015 | EXPLOSIVE ATMOSPHERES - PART 17: ELECTRICAL INSTALLATIONS INSPECTION AND MAINTENANCE |
| BS EN 1034-17:2012 | Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines Tissue making machines |
| 09/30209043 DC : 0 | BS EN 13922 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - OVERFILL PREVENTION SYSTEMS FOR LIQUID FUELS |
| I.S. EN 13616-2:2016 | OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID FUELS - PART 2: OVERFILL PREVENTION DEVICES WITHOUT A CLOSURE DEVICE |
| I.S. EN 60034-30-1:2014 | ROTATING ELECTRICAL MACHINES - PART 30-1: EFFICIENCY CLASSES OF LINE OPERATED AC MOTORS (IE CODE) |
| CEI EN 50050-1 : 2014 | ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 1: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE LIQUID COATING MATERIALS |
| 09/30182350 DC : 0 | BS EN 12757-1:2005/A1 - MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING |
| BS EN 50050-3:2013 | Electrostatic hand-held spraying equipment. Safety requirements Hand-held spraying equipment for ignitable flock |
| UNE-EN 50176:2010 | Stationary electrostatic application equipment for ignitable liquid coating material - Safety requirements |
| DIN EN 16191:2014-09 | TUNNELLING MACHINERY - SAFETY REQUIREMENTS |
| BS EN 15714-2:2009 | Industrial valves. Actuators Electric actuators for industrial valves. Basic requirements |
| 08/30174143 DC : DRAFT SEP 2008 | BS EN 12312-5 AMD1 - AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 5: AIRCRAFT FUELLING EQUIPMENT |
| BS EN 60034-30-1:2014 | Rotating electrical machines Efficiency classes of line operated AC motors (IE code) |
| 07/30152812 DC : DRAFT AUG 2007 | BS EN 50174-2 - INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 2: INSTALLATION PLANNING AND PRACTICES INSIDE BUILDINGS |
| BS EN 1012-3:2013 | Compressors and vacuum pumps. Safety requirements Process compressors |
| DIN EN ISO 8230-3:2009-05 | SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 3: MACHINES USING COMBUSTIBLE SOLVENTS |
| 14/30294092 DC : 0 | BS EN 14986 - DESIGN OF FANS WORKING IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
| EN 60079-30-2:2017 | Explosive atmospheres - Part 30-2: Electrical resistance trace heating - Application guide for design, installation and maintenance |
| PREN 16191 : DRAFT 2010 | TUNNELLING MACHINERY - SAFETY REQUIREMENTS |
| I.S. EN 60079-1:2014 | EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D' |
| UNE-EN 60079-10-2:2016 | Explosive atmospheres - Part 10-2: Classification of areas - Explosive dust atmospheres |
| DIN EN 415-10:2014-07 | SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS |
| I.S. EN 60079-10-1:2015 | EXPLOSIVE ATMOSPHERES - PART 10-1: CLASSIFICATION OF AREAS - EXPLOSIVE GAS ATMOSPHERES |
| PREN 13617-3 : DRAFT 2010 | PETROL FILLING STATIONS - PART 3: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SHEAR VALVES |
| PREN 12779 : DRAFT 2014 | SAFETY OF WOODWORKING MACHINES - CHIPS AND DUST EXTRACTION SYSTEMS WITH FIXED INSTALLATIONS - SAFETY REQUIREMENTS |
| PREN 12942 : DRAFT 2016 | RESPIRATORY PROTECTIVE DEVICES - POWER FILTERING DEVICES INCORPORATING FULL FACE MASKS, HALF MASKS OR QUARTER MASKS - REQUIREMENTS, TESTING, MARKING |
| I.S. EN 16299:2013 | CATHODIC PROTECTION OF EXTERNAL SURFACES OF ABOVE GROUND STORAGE TANK BASES IN CONTACT WITH SOIL OR FOUNDATIONS |
| I.S. EN 50050-2:2013 | ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 2: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE COATING POWDER |
| I.S. EN 50050-1:2013 | ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 1: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE LIQUID COATING MATERIALS |
| I.S. EN 60079-29-2:2015 | EXPLOSIVE ATMOSPHERES - PART 29-2: GAS DETECTORS - SELECTION, INSTALLATION, USE AND MAINTENANCE OF DETECTORS FOR FLAMMABLE GASES AND OXYGEN |
| I.S. EN 12405-3:2015 | GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER |
| I.S. EN 15339-2:2007 | THERMAL SPRAYING - SAFETY REQUIREMENTS FOR THERMAL SPRAYING EQUIPMENT - PART 2: GAS CONTROL UNITS |
| BS EN 60079-29-4:2010 | Explosive atmospheres Gas detectors. Performance requirements of open path detectors for flammable gases |
| I.S. EN 60079-17:2014 | EXPLOSIVE ATMOSPHERES - PART 17: ELECTRICAL INSTALLATIONS INSPECTION AND MAINTENANCE |
| I.S. EN 14236:2007 | ULTRASONIC DOMESTIC GAS METERS |
| BS EN 60079-29-1:2007 | Explosive atmospheres Gas detectors. Performance requirements of detectors for flammable gases |
| I.S. EN 60601-1:2006&A1:2013&AC:2014&A12:2014 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE |
| I.S. EN ISO 18081:2016 | NON-DESTRUCTIVE TESTING - ACOUSTIC EMISSION TESTING (AT) - LEAK DETECTION BY MEANS OF ACOUSTIC EMISSION (ISO 18081:2016) |
| UNI EN 415-10 : 2014 | SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS |
| I.S. EN 50174-3:2013 | INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS |
| CEI EN 60079-18 : 2016 | EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION 'M' |
| PREN 13160-1 : DRAFT 2014 | LEAK DETECTION SYSTEMS - PART 1: GENERAL PRINCIPLES |
| I.S. EN 60079-32-2:2015 | EXPLOSIVE ATMOSPHERES - PART 32-2: ELECTROSTATICS HAZARDS - TESTS |
| CEI EN 60079-30-2 : 2008 | EXPLOSIVE ATMOSPHERES - PART 30-2: ELECTRICAL RESISTANCE TRACE HEATING - APPLICATION GUIDE FOR DESIGN, INSTALLATION AND MAINTENANCE |
| BS EN 60079-15:2010 | Explosive atmospheres Equipment protection by type of protection \'n\' |
| PREN 14116 : DRAFT 2011 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - DIGITAL INTERFACE FOR THE PRODUCT RECOGNITION DEVICE |
| PREN 50174-3 : DRAFT 2012 | INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS |
| BS EN 60079-30-1:2017 | Explosive atmospheres Electrical resistance trace heating. General and testing requirements |
| BS EN 1127-1:2019 | Explosive atmospheres. Explosion prevention and protection Basic concepts and methodology |
| UNI EN 16299 : 2013 | CATHODIC PROTECTION OF EXTERNAL SURFACES OF ABOVE GROUND STORAGE TANK BASES IN CONTACT WITH SOIL OR FOUNDATIONS |
| EN 61936-1 : 2010 AMD 1 2014 | POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES (IEC 61936-1:2010/A1:2014) |
| EN 12405-1:2005+A2:2010 | Gas meters - Conversion devices - Part 1: Volume conversion |
| I.S. EN 60702-2:2002 | MINERAL INSULATED CABLES AND THEIR TERMINATIONS WITH A RATED VOLTAGE NOT EXCEEDING 750 V - PART 2: TERMINATIONS |
| DIN EN 12921-1:2011-02 | Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements (includes Amendment A1:2010) |
| EN 13617-3:2012 | Petrol filling stations - Part 3: Safety requirements for construction and performance of shear valves |
| I.S. EN 1127-1:2011 | EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY |
| I.S. EN 61310-2:2008 | SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 2: REQUIREMENTS FOR MARKING |
| DIN EN 1710:2008-08 | EQUIPMENT AND COMPONENTS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES |
| DIN EN 13463-3:2005-07 | NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 3: PROTECTION BY FLAMEPROOF ENCLOSURE 'D' |
| DIN EN 12583:2014-07 | GAS INFRASTRUCTURE - COMPRESSOR STATIONS - FUNCTIONAL REQUIREMENTS |
| DIN EN 1953:2013-12 | ATOMISING AND SPRAYING EQUIPMENT FOR COATING MATERIALS - SAFETY REQUIREMENTS |
| DIN EN 13617-2:2012-05 | Petrol filling stations - Part 2: Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers |
| DIN EN 1127-2:2014-09 | EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING |
| DIN EN 13952:2015-09 (Draft) | LPG EQUIPMENT AND ACCESSORIES - FILLING OPERATIONS FOR LPG CYLINDERS |
| DIN EN 12050-1:2015-05 | WASTEWATER LIFTING PLANTS FOR BUILDINGS AND SITES - PART 1: LIFTING PLANTS FOR WASTEWATER CONTAINING FAECAL MATTER |
| BS EN 13617-4:2012 | Petrol filling stations Safety requirements for construction and performance of swivels for use on metering pumps and dispensers |
| UNE-EN 60079-14:2016 | Explosive atmospheres - Part 14: Electrical installations design, selection and erection |
| UNE-EN 1755:2016 | Industrial Trucks - Safety requirements and verification - Supplementary requirements for operation in potentially explosive atmospheres |
| BS EN 13012:2012 | Petrol filling stations. Construction and performance of automatic nozzles for use on fuel dispensers |
| UNE-EN 13617-3:2012 | Petrol filling stations - Part 3: Safety requirements for construction and performance of shear valves |
| BS EN 1010-1 : 2004 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS |
| BS EN 12921-3 : 2005 | MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 3: SAFETY OF MACHINES USING FLAMMABLE CLEANING LIQUIDS |
| BS EN 1473:2016 | Installation and equipment for liquefied natural gas. Design of onshore installations |
| BS EN 12312-5 : 2005 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 5: AIRCRAFT FUELLING EQUIPMENT |
| BS EN 12215 : 2004 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS |
| UNE-EN 14678-1:2013 | LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers |
| I.S. EN 13922:2011 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - OVERFILL PREVENTION SYSTEMS FOR LIQUID FUELS |
| BS EN 12753 : 2005 | THERMAL CLEANING SYSTEMS FOR EXHAUST GAS FROM SURFACE TREATMENT EQUIPMENT - SAFETY REQUIREMENTS |
| BS EN 60079-14:2014 | Explosive atmospheres Electrical installations design, selection and erection |
| UNE-EN 60079-11:2013 | Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" |
| UNE-EN 378-3:2017 | Refrigerating systems and heat pumps - Safety and environmental requirements - Part 3: Installation site and personal protection |
| I.S. EN 13463-3:2005 | NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 3: PROTECTION BY FLAMEPROOF ENCLOSURE 'D' |
| UNI EN 13922 : 2011 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - OVERFILL PREVENTION SYSTEMS FOR LIQUID FUELS |
| EN 1474-1:2008 | Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 1: Design and testing of transfer arms |
| UNI EN 13617-1 : 2012 | PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS |
| EN 16299:2013 | Cathodic protection of external surfaces of above ground storage tank bases in contact with soil or foundations |
| EN 14678-1:2013 | LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers |
| EN 137:2006 | Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus with full face mask - Requirements, testing, marking |
| UNI EN 12921-1 : 2010 | MACHINES FOR SURFACE CLEANING AND PRE- TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 1: COMMON SAFETY REQUIREMENTS |
| UNI EN 15207 : 2015 | TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - PLUG/SOCKET CONNECTION AND SUPPLY CHARACTERISTICS FOR SERVICE EQUIPMENT IN HAZARDOUS AREAS WITH 24 V NOMINAL SUPPLY VOLTAGE |
| UNI EN 14677 : 2008 | SAFETY OF MACHINERY - SECONDARY STEELMAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL |
| UNI EN 1012-1 : 2010 | COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 1: AIR COMPRESSORS |
| UNI EN 12581 : 2010 | COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS |
| UNI EN 1010-1 : 2011 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS |
| UNI EN 12942 : 2009 | RESPIRATORY PROTECTIVE DEVICES - POWER ASSISTED FILTERING DEVICES INCORPORATING FULL FACE MASKS, HALF MASKS OR QUARTER MASKS - REQUIREMENTS, TESTING, MARKING |
| UNI EN 13799 : 2012 | LPG EQUIPMENT AND ACCESSORIES - CONTENTS GAUGES FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSELS |
| UNI EN 12941 : 2009 | RESPIRATORY PROTECTIVE DEVICES - POWERED FILTERING DEVICES INCORPORATING A HELMET OR A HOOD - REQUIREMENTS, TESTING, MARKING |
| UNI EN 13463-1 : 2009 | NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 1: BASIC METHOD AND REQUIREMENTS |
| UNI EN 12981 : 2009 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS |
| UNI EN 1012-3 : 2014 | COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS |
| UNI EN 12757-1 : 2010 | MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING |
| UNI EN 1953 : 2013 | Atomising and spraying equipment for coating materials - Safety requirements |
| UNI EN 14591-4 : 2008 | EXPLOSION PREVENTION AND PROTECTION IN UNDERGROUND MINES - PROTECTIVE SYSTEMS - PART 4: AUTOMATIC EXTINGUISHING SYSTEMS FOR ROAD HEADERS |
| UNI EN 1127-2 : 2014 | EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING |
| UNI EN 12753 : 2010 | THERMAL CLEANING SYSTEMS FOR EXHAUST GAS FROM SURFACE TREATMENT EQUIPMENT - SAFETY REQUIREMENTS |
| UNI EN 13852-1 : 2013 | CRANES - OFFSHORE CRANES - PART 1: GENERAL-PURPOSE OFFSHORE CRANES |
| UNI EN 12621 : 2010 | MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS |
| UNI EN 14492-2 : 2009 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| UNI EN 1248 : 2009 | FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR ABRASIVE BLASTING EQUIPMENT |
| UNI EN 1710 : 2008 | EQUIPMENT AND COMPONENTS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES |
| UNI EN 14678-1 : 2013 | LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS |
| UNI EN 13355 : 2009 | COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS |
| UNI EN 14492-1 : 2009 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| UNI EN 12215 : 2010 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS |
| UNI EN 12921-3 : 2009 | MACHINES FOR SURFACE CLEANING AND PRE- TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 3: SAFETY OF MACHINES USING FLAMMABLE CLEANING LIQUIDS |
| UNI EN 12583 : 2014 | GAS INFRASTRUCTURE - COMPRESSOR STATIONS - FUNCTIONAL REQUIREMENTS |
| UNI EN 14681 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES |
| UNE-EN 50223:2016 | Stationary electrostatic application equipment for ignitable flock material - Safety requirements |
| I.S. EN 62952-1:2016 | POWER SOURCES FOR A WIRELESS COMMUNICATION DEVICE - PART 1: GENERAL REQUIREMENTS OF POWER MODULES |
| BS EN 50176:2009 | Stationary electrostatic application equipment for ignitable liquid coating material. Safety requirements |
| 12/30258747 DC : DRAFT MAR 2012 | BS EN 12583 - GAS INFRASTRUCTURE - COMPRESSOR STATIONS - FUNCTIONAL REQUIREMENTS |
| BS EN ISO 18081:2016 | Non-destructive testing. Acoustic emission testing (AT). Leak detection by means of acoustic emission |
| I.S. EN 13463-1:2009 | NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 1: BASIC METHOD AND REQUIREMENTS |
| DIN EN 1474-1:2009-03 | INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS |
| BS EN 60079-32-2:2015 | Explosive atmospheres Electrostatics hazards. Tests |
| DIN EN 16191 E : 2014 | TUNNELLING MACHINERY - SAFETY REQUIREMENTS |
| BS EN 61241-11:2006 | Electrical apparatus for use in the presence of combustible dust Protection by intrinsic safety \'iD\' |
| UNE-EN 60079-13:2011 | Explosive atmospheres - Part 13: Equipment protection by pressurized room "p" |
| PD CEN/TR 16787:2014 | Industrial Gas Installation. Guideline |
| BS EN 60034-30:2009 | Rotating electrical machines Efficiency classes of single-speed, three-phase, cage-induction motors (IE-code) |
| CEI EN 60034-30-1 : 2015 | ROTATING ELECTRICAL MACHINES - PART 30-1: EFFICIENCY CLASSES OF LINE OPERATED AC MOTORS (IE CODE) |
| CEN/TR 15339-3:2014 | Thermal spraying - Safety requirements for thermal spraying equipment - Part 3: Torches for thermal spraying and their connection and supply units |
| PREN 14236 : DRAFT 2017 | ULTRASONIC DOMESTIC GAS METERS |
| UNE-EN 62282-3-1:2011 | Fuel cell technologies - Part 3-1: Stationary fuel cell power systems - Safety |
| I.S. EN 12941:1998 | RESPIRATORY PROTECTIVE DEVICES - POWERED FILTERING DEVICES INCORPORATING A HELMET OR A HOOD - REQUIREMENTS, TESTING, MARKING |
| BS EN 60079-13:2017 | Explosive atmospheres Equipment protection by pressurized room \'p\' and artificially ventilated room \'v\' |
| EN 15714-2:2009 | Industrial valves - Actuators - Part 2: Electric actuators for industrial valves - Basic requirements |
| 09/30205570 DC : 0 | BS EN 13799 - LPG EQUIPMENT AND ACCESSORIES - CONTENTS GAUGES FOR LPG TANKS |
| PREN 50050-3 : DRAFT 2011 | ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 3: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE FLOCK |
| UNI EN 1034-17 : 2012 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 17: TISSUE MAKING MACHINES |
| PREN 50050-2 : DRAFT 2011 | ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 2: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE COATING POWDER |
| BS EN 12405-3:2015 | Gas meters. Conversion devices Flow computer |
| I.S. EN 60079-2:2014 | EXPLOSIVE ATMOSPHERES - PART 2: EQUIPMENT PROTECTION BY PRESSURIZED ENCLOSURE 'P' |
| UNI EN 15714-2 : 2009 | INDUSTRIAL VALVES - ACTUATORS - PART 2: ELECTRIC ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| 14/30316181 DC : 0 | BS EN 50628 - ERECTION OF ELECTRICAL INSTALLATIONS IN UNDERGROUND MINES |
| 13/30286135 DC : 0 | BS EN 13616-1 - OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID FUELS - REQUIREMENTS AND TEST/ASSESSMENT METHODS - PART 1: OVERFILL PREVENTION DEVICES WITH CLOSURE DEVICE |
| I.S. EN 13616-1:2016 | OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID FUELS -PART 1: OVERFILL PREVENTION DEVICES WITH CLOSURE DEVICE |
| 10/30219408 DC : 0 | BS EN 13617-2 - PETROL FILLING STATIONS - PART 2: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SAFE BREAKS FOR USE ON METERING PUMPS AND DISPENSERS |
| PD CEN/TR 15339-6:2014 | Thermal spraying. Safety requirements for thermal spraying equipment Spray booth, Handling system, Dust collection, Exhaust system, Filter |
| 11/30248845 DC : 0 | BS EN 50050-2:2011 - ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 2: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE COATING POWDER |
| EN 14116:2012+A1:2014 | Tanks for transport of dangerous goods - Digital interface for product recognition devices for liquid fuels |
| CEI EN 62952-1 : 1ED 2017 | POWER SOURCES FOR A WIRELESS COMMUNICATION DEVICE - PART 1: GENERAL REQUIREMENTS OF POWER MODULES |
| BS EN 415-10:2014 | Safety of packaging machines General Requirements |
| 11/30247615 DC : 0 | BS EN 16314 - GAS METERS - ADDITIONAL FUNCTIONALITIES |
| PREN 1755 : DRAFT 2013 | SAFETY OF INDUSTRIAL TRUCKS - OPERATION IN POTENTIALLY EXPLOSIVE ATMOSPHERES - USE IN FLAMMABLE GAS, VAPOUR, MIST AND DUST |
| BS EN 1474-1:2008 | Installation and equipment for liquefied natural gas. Design and testing of marine transfer systems Design and testing of transfer arms |
| ONORM EN 14593-1 : 2005 | RESPIRATORY PROTECTIVE DEVICES - COMPRESSED AIR LINE BREATHING APPARATUS WITH DEMAND VALVE - PART 1: APPARATUS WITH A FULL FACE MASK - REQUIREMENTS, TESTING, MARKING |
| 10/30219411 DC : 0 | BS EN 13617-3 - PETROL FILLING STATIONS - PART 3: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SHEAR VALVES |
| 08/30175652 DC : DRAFT SEP 2008 | BS EN 1248 AMD1 - FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR ABRASIVE BLASTING EQUIPMENT |
| BS EN 50495:2010 | Safety devices required for the safe functioning of equipment with respect to explosion risks |
| BS EN 62952-1:2016 | Power sources for a wireless communication device General requirements of power modules |
| DIN EN 15268:2008-11 | PETROL FILLING STATIONS - SAFETY REQUIREMENTS FOR THE CONSTRUCTION OF SUBMERSIBLE PUMP |
| DIN EN 1034-17:2012-11 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 17: Tissue making machines |
| UNE-EN 13175:2015 | LPG Equipment and accessories - Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings |
| BS EN 13616-1:2016 | Overfill prevention devices for static tanks for liquid fuels Overfill prevention devices with closure device |
| BS EN 60079-10-1:2015 | Explosive atmospheres Classification of areas. Explosive gas atmospheres |
| 09/30182347 DC : 0 | BS EN 12621:2006/A1 - MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS |
| PD CLC/TR 50427:2004 | Assessment of inadvertent ignition of flammable atmospheres by radio-frequency radiation. Guide |
| BS EN 60079-2:2014 | Explosive atmospheres Equipment protection by pressurized enclosure \'p\' |
| 14/30292850 DC : 0 | BS EN 12779 - SAFETY OF WOODWORKING MACHINES - CHIPS AND DUST EXTRACTION SYSTEMS WITH FIXED INSTALLATIONS - SAFETY REQUIREMENTS |
| UNE-EN 60079-25:2017 | Explosive atmospheres -- Part 25: Intrinsically safe electrical systems |
| UNI EN 1127-1 : 2011 | EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY |
| UNE-EN 16299:2013 | Cathodic protection of external surfaces of above ground storage tank bases in contact with soil or foundations |
| I.S. EN 61285:2015 | INDUSTRIAL-PROCESS CONTROL - SAFETY OF ANALYZER HOUSES |
| SAE AS 6479 : 2014 | SPLICER, FUSION, FIBER OPTIC, AEROSPACE |
| PREN 13617-2 : DRAFT 2010 | PETROL FILLING STATIONS - PART 2: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SAFE BREAKS FOR USE ON METERING PUMPS AND DISPENSERS |
| CEI CLC/TR 50427 : 2005 | ASSESSMENT OF INADVERTENT IGNITION OF FLAMMABLE ATMOSPHERES BY RADIO-FREQUENCY RADIATION - GUIDE |
| NF EN 50104 : 2010 | ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF OXYGEN - PERFORMANCE REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 8230-3:2008 | SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 3: MACHINES USING COMBUSTIBLE SOLVENTS |
| BS EN 60702-2 : 2002 | MINERAL INSULATED CABLES AND THEIR TERMINATIONS WITH A RATED VOLTAGE NOT EXCEEDING 750 V - PART 2: TERMINATIONS |
| EN 50174-3:2013/A1:2017 | INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS |
| I.S. EN 14677:2008 | SAFETY OF MACHINERY - SECONDARY STEELMAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL |
| I.S. EN 60695-1-10:2017 | FIRE HAZARD TESTING - PART 1-10: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - GENERAL GUIDELINES |
| I.S. EN 16191:2014 | TUNNELLING MACHINERY - SAFETY REQUIREMENTS |
| I.S. EN 50104:2010 | ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF OXYGEN - PERFORMANCE REQUIREMENTS AND TEST METHODS |
| I.S. EN 45544-1:2015 | WORKPLACE ATMOSPHERES - ELECTRICAL APPARATUS USED FOR THE DIRECT DETECTION AND DIRECT CONCENTRATION MEASUREMENT OF TOXIC GASES AND VAPOURS - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
| I.S. EN 61987-14:2016 | INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 14: LISTS OF PROPERTIES (LOP) FOR TEMPERATURE MEASURING EQUIPMENT FOR ELECTRONIC DATA EXCHANGE |
| PREN 13852-1 : DRAFT 2011 | CRANES - OFFSHORE CRANES - PART 1: GENERAL PURPOSE OFFSHORE CRANES |
| PREN 15207 : DRAFT 2012 | TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - PLUG/SOCKET CONNECTION AND SUPPLY CHARACTERISTICS FOR SERVICE EQUIPMENT IN HAZARDOUS AREAS WITH 24 V NOMINAL SUPPLY VOLTAGE |
| PREN 50628 : DRAFT 2014 | ERECTION OF ELECTRICAL INSTALLATIONS IN UNDERGROUND MINES |
| PREN 12050-1 : DRAFT 2012 | WASTEWATER LIFTING PLANTS FOR BUILDINGS AND SITES - PART 1: LIFTING PLANTS FOR WASTEWATER CONTAINING FAECAL MATTER |
| ONORM EN 14236 : 2008 | ULTRASONIC DOMESTIC GAS METERS |
| CEI EN 60079-29-2 : 2016 | EXPLOSIVE ATMOSPHERES - PART 29-2: GAS DETECTORS - SELECTION, INSTALLATION, USE AND MAINTENANCE OF DETECTORS FOR FLAMMABLE GASES AND OXYGEN |
| CLC/TS 50131-7:2010 | Alarm systems - Intrusion and hold-up systems - Part 7: Application guidelines |
| PREN 13799 : DRAFT 2009 | LPG EQUIPMENT AND ACCESSORIES - CONTENTS GAUGES FOR LPG TANKS |
| S.R. CEN/TR 15339-6:2014 | THERMAL SPRAYING - SAFETY REQUIREMENTS FOR THERMAL SPRAYING EQUIPMENT - PART 6: SPRAY BOOTH, HANDLING SYSTEM, DUST COLLECTION, EXHAUST SYSTEM, FILTER |
| UNE-EN 50050-1:2014 | Electrostatic hand-held spraying equipment - Safety requirements - Part 1: Hand-held spraying equipment for ignitable liquid coating materials |
| DIN EN 12753:2011-02 | Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety requirements (includes Amendment A1:2010) |
| I.S. EN 61936-1:2010 | POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES |
| UNE-EN 14116:2013 | Tanks for transport of dangerous goods - Digital interface for product recognition devices for liquid fuels |
| I.S. EN 60079-6:2015 | EXPLOSIVE ATMOSPHERES - PART 6: EQUIPMENT PROTECTION BY LIQUID IMMERSION 'O' |
| DIN EN 12757-1:2011-02 | Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing (includes Amendment A1:2010) |
| EN 12480:2018 | Gas meters - Rotary displacement gas meters |
| EN 13617-2:2012 | Petrol filling stations - Part 2: Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers |
| I.S. EN 12405-1:2005 | GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| I.S. EN 61241-0:2006 | ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 0: GENERAL REQUIREMENTS |
| BS EN 14593-1:2005 | Respiratory protective devices. Compressed air line breathing apparatus with demand valve Apparatus with a full mask. Requirements, testing, marking |
| I.S. EN 12480:2018 | GAS METERS - ROTARY DISPLACEMENT GAS METERS |
| EN 13922:2011 | Tanks for transport of dangerous goods - Service equipment for tanks - Overfill prevention systems for liquid fuels |
| DIN EN 13012:2012-09 | Petrol filling stations - Construction and performance of automatic nozzles for use on fuel dispensers |
| DIN EN 13852-1:2014-01 | Cranes - Offshore cranes - Part 1: General-purpose offshore cranes |
| DIN EN 13799:2012-06 | LPG equipment and accessories - Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels |
| BS EN 50628:2016 | Erection of electrical installations in underground mines |
| BS EN 12050-1:2015 | Wastewater lifting plants for buildings and sites Lifting plants for wastewater containing faecal matter |
| BS EN 60601-1 : 2006 | MEDICAL ELECTRICAL EQUIPMENT PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE |
| UNE-EN 12621:2006 | Machinery for the supply and circulation of coating materials under pressure - Safety requirements |
| BS EN 14116 : 2012 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - DIGITAL INTERFACE FOR PRODUCT RECOGNITION DEVICES FOR LIQUID FUELS |
| BS EN 60079-11:2012 | Explosive atmospheres Equipment protection by intrinsic safety \'i\' |
| BS EN 12583:2014 | Gas Infrastructure. Compressor stations. Functional requirements |
| BS EN 14986:2007 | Design of fans working in potentially explosive atmospheres |
| ISO 8230-3:2008 | Safety requirements for dry-cleaning machines Part 3: Machines using combustible solvents |
| BS EN 1804-3 : 2006 | MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 3: HYDRAULIC CONTROL SYSTEMS |
| BS EN 13463-6:2005 | Non-electrical equipment for potentially explosive atmospheres Protection by control of ignition source \'b\' |
| UNE-EN 60079-6:2016 | Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o" |
| ISO/IEC 80079-34:2011 | Explosive atmospheres Part 34: Application of quality systems for equipment manufacture |
| BS EN 14236:2007 | Ultrasonic domestic gas meters |
| BS EN 62282-4-101:2014 | Fuel cell technologies Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU). Safety of electrically powered industrial trucks |
| BS EN 13617-1:2012 | Petrol filling stations Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units |
| BS EN 12621 : 2006 | MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS |
| 17/30361391 DC : 0 | BS EN 50174-2 - INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 2: INSTALLATION PLANNING AND PRACTICES INSIDE BUILDINGS |
| BS EN 15339-2:2007 | Thermal spraying. Safety requirements for thermal spraying equipment Gas control units |
| BS EN 15207:2014 | Tanks for the transport of dangerous goods. Plug/socket connection and supply characteristics for service equipment in hazardous areas with 24 V nominal supply voltage |
| BS EN 12779:2015 | Safety of woodworking machines. Chip and dust extraction systems with fixed installation. Safety requirements |
| UNE-EN 1539:2010 | Dryers and ovens, in which flammable substances are released - Safety requirements |
| UNE-EN 13160-3:2017 | Leak detection systems - Part 3: Requirements and test/assessment methods for liquid systems for tanks |
| BS EN 13799:2012 | LPG equipment and accessories. Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels |
| BS EN 60079-35-1:2011 | Household and similar electrical appliances - Safety - Part 2-82: Particular requirements for amusement machines and personal service machines |
| UNE-EN 1248:2001 | Foundry Machinery - Safety requirements for abrasive blasting equipment. |
| UNE-EN 14986:2017 | Design of fans working in potentially explosive atmospheres |
| EN ISO/IEC 80079-34:2011 | Explosive atmospheres - Part 34: Application of quality systems for equipment manufacture (ISO/IEC 80079-34:2011) |
| BS EN 13237:2012 | Potentially explosive atmospheres. Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres |
| BS EN 1127-2:2014 | Explosive atmospheres. Explosion prevention and protection Basic concepts and methodology for mining |
| UNE-EN 13012:2012 | Petrol filling stations - Construction and performance of automatic nozzles for use on fuel dispensers |
| UNE-EN 12583:2014 | Gas Infrastructure - Compressor stations - Functional requirements |
| BS EN 1248 : 2001 | FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR ABRASIVE BLASTING EQUIPMENT |
| UNE-EN 13617-1:2012 | Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units |
| BS EN 14492-1 : 2006 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| ISO 18081:2016 | Non-destructive testing — Acoustic emission testing (AT) — Leak detection by means of acoustic emission |
| PD CLC/TR 60079-33:2015 | Explosive atmospheres Equipment protection by special protection \'s\' |
| BS EN 1710 : 2005 | EQUIPMENT AND COMPONENTS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES |
| BS EN 61936-1 : 2010 | POWER INSTALLATIONS EXCEEDING 1 KV A.C - PART 1: COMMON RULES |
| BS EN 378-3:2016 | Refrigerating systems and heat pumps. Safety and environmental requirements Installation site and personal protection |
| BS EN 12941 : 1999 | RESPIRATORY PROTECTIVE DEVICES - POWERED FILTERING DEVICES INCORPORATING A HELMET OR A HOOD - REQUIREMENTS, TESTING, MARKING |
| UNE-EN 61936-1:2012 | Power installations exceeding 1 kV a.c. -- Part 1: Common rules |
| UNE-EN 12050-1:2015 | Wastewater lifting plants for buildings and sites - Part 1: Lifting plants for wastewater containing faecal matter |
| BS EN 13922:2011 | Tanks for transport of dangerous goods. Service equipment for tanks. Overfill prevention systems for liquid fuels |
| UNE-EN 13463-1:2011 | Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements |
| BS EN 1539:2015 | Dryers and ovens, in which flammable substances are released. Safety requirements |
| UNE-EN 60079-2:2015 | Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure "p" |
| UNE-EN 13922:2012 | Tanks for transport of dangerous goods - Service equipment for tanks - Overfill prevention systems for liquid fuels |
| UNE-EN 13160-1:2017 | Leak detection systems - Part 1: General Principles |
| UNE-EN 60079-35-1:2012 | Explosive atmospheres - Part 35-1: Caplights for use in mines susceptible to firedamp - General requirements - Construction and testing in relation to the risk of explosion |
| DIN EN 15207:2015-03 | TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - PLUG/SOCKET CONNECTION AND SUPPLY CHARACTERISTICS FOR SERVICE EQUIPMENT IN HAZARDOUS AREAS WITH 24 V NOMINAL SUPPLY VOLTAGE |
| UNE-EN 13852-1:2014 | Cranes - Offshore cranes - Part 1: General-purpose offshore cranes |
| EN 61241-0:2006 | Electrical apparatus for use in the presence of combustible dust - Part 0: General requirements |
| EN 50223:2015 | Stationary electrostatic application equipment for ignitable flock material - Safety requirements |
| EN 13799:2012 | LPG equipment and accessories - Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels |
| EN ISO 18081:2016 | Non-destructive testing - Acoustic emission testing (AT) - Leak detection by means of acoustic emission (ISO 18081:2016) |
| UNI EN 13617-4 : 2012 | PETROL FILLING STATIONS - PART 4: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SWIVELS FOR USE ON METERING PUMPS AND DISPENSERS |
| UNI EN 13617-2 : 2012 | PETROL FILLING STATIONS - PART 2: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SAFE BREAKS FOR USE ON METERING PUMPS AND DISPENSERS |
| EN 14986:2017 | Design of fans working in potentially explosive atmospheres |
| EI MODEL CODE SAFE PRACTICE PT1 : 2010 | THE SELECTION, INSTALLATION, INSPECTION, AND MAINTENANCE OF ELECTRICAL AND NON ELECTRICAL APPARATUS IN HAZARDOUS AREAS |
| EN 415-10:2014 | Safety of packaging machines - Part 10: General Requirements |
| UNI EN 13012 : 2012 | PETROL FILLING STATIONS - CONSTRUCTION AND PERFORMANCE OF AUTOMATIC NOZZLES FOR USE ON FUEL DISPENSERS |
| EN 1755:2015 | Industrial Trucks - Safety requirements and verification - Supplementary requirements for operation in potentially explosive atmospheres |
| UNI EN 13617-3 : 2012 | PETROL FILLING STATIONS - PART 3: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SHEAR VALVES |
| EN ISO 8230-3:2008 | Safety requirements for dry-cleaning machines - Part 3: Machines using combustible solvents (ISO 8230-3:2008) |
| EN 14797:2006 | Explosion venting devices |
| EN 16009:2011 | Flameless explosion venting devices |
| EN 15268:2008 | Petrol filling stations - Safety requirements for the construction of submersible pump assemblies |
| EN 1539:2015 | Dryers and ovens, in which flammable substances are released - Safety requirements |
| EN 12581:2005+A1:2010 | Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements |
| EI 1540 : 2014 | DESIGN, CONSTRUCTION, COMMISSIONING, MAINTENANCE AND TESTING OF AVIATION FUELLING FACILITIES |
| EN 1953:2013 | Atomising and spraying equipment for coating materials - Safety requirements |
| EN 13616-1:2016 | Overfill prevention devices for static tanks for liquid fuels - Part 1: Overfill prevention devices with closure device |
| EN 13952:2017 | LPG equipment and accessories - Filling operations for LPG cylinders |
| EN 14681:2006+A1:2010 | Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces |
| EN 13852-1:2013 | Cranes - Offshore cranes - Part 1: General-purpose offshore cranes |
| EN 14677:2008 | Safety of machinery - Secondary steelmaking - Machinery and equipment for treatment of liquid steel |
| EN 15207:2014 | Tanks for the transport of dangerous goods - Plug/socket connection and supply characteristics for service equipment in hazardous areas with 24 V nominal supply voltage |
| EN 13852-2:2004 | Cranes - Offshore cranes - Part 2: Floating cranes |
| BS EN 13616-2:2016 | Overfill prevention devices for static tanks for liquid fuels Overfill prevention devices without a closure device |
| BS EN ISO 8230-3:2008 | Safety requirements for dry-cleaning machines Machines using combustible solvents |
| UNE-EN 60695-1-10:2017 | Fire hazard testing - Part 1-10: Guidance for assessing the fire hazard of electrotechnical products - General guidelines |
| PREN 13617-4 : DRAFT 2010 | PETROL FILLING STATIONS - PART 4: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SWIVELS FOR USE ON METERING PUMPS AND DISPENSERS |
| UNE-EN 60079-15:2013 | Explosive atmospheres - Part 15: Equipment protection by type of protection "n" |
| UNE-EN 50177:2010 | Stationary electrostatic application equipment for ignitable coating powders - Safety requirements |
| 11/30239992 DC : 0 | BS EN 14116 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - DIGITAL INTERFACE FOR THE PRODUCT RECOGNITION DEVICE |
| PD CEN/TR 15339-3:2014 | Thermal spraying. Safety requirements for thermal spraying equipment Torches for thermal spraying and their connection and supply units |
| UNE-EN 60079-28:2016 | Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation |
| BS EN 60079-25:2010 | Explosive atmospheres Intrinsically safe electrical systems |
| PREN 13160-3 : DRAFT 2014 | LEAK DETECTION SYSTEMS - PART 3: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR LIQUID SYSTEMS FOR TANKS |
| 10/30214970 DC : 0 | BS EN 13616 - OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID PETROLEUM FUELS |
| PD CEN/TR 15339-4:2014 | Thermal spraying. Safety requirements for thermal spraying equipment Gas and liquid fuel supply |
| BS EN 50050-1:2013 | Electrostatic hand-held spraying equipment. Safety requirements Hand-held spraying equipment for ignitable liquid coating materials |
| CEI EN 50050-3 : 2014 | ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 3: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE FLOCK |
| 12/30261231 DC : 0 | BS EN 15207 - TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - PLUG/SOCKET CONNECTION AND SUPPLY CHARACTERISTICS FOR SERVICE EQUIPMENT IN HAZARDOUS AREAS WITH 24 V NOMINAL SUPPLY VOLTAGE |
| 10/30233953 DC : 0 | BS EN 16191 - TUNNELLING MACHINERY - SAFETY REQUIREMENTS |
| 09/30208493 DC : 0 | BS EN 16009 - FLAMELESS EXPLOSION VENTING DEVICES (TYPE C STANDARD) |
| BS EN 61241-0:2006 | Electrical apparatus for use in the presence of combustible dust General requirements |
| UNE-EN 15207:2015 | Tanks for the transport of dangerous goods - Plug/socket connection and supply characteristics for service equipment in hazardous areas with 24 V nominal supply voltage |
| 10/30232464 DC : 0 | BS EN 12480 - GAS METERS - ROTARY DISPLACEMENT GAS METERS |
| 07/30160767 DC : 0 | BS EN 13463-1 - NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 1: BASIC METHOD AND REQUIREMENTS |
| 17/30356728 DC : 0 | BS EN 12261 - GAS METERS - TURBINE GAS METERS |
| UNE-EN 13616-2:2016 | Overfill prevention devices for static tanks for liquid fuels - Part 2: Overfill prevention devices without a closure device |
| BS EN 16009:2011 | Flameless explosion venting devices |
| I.S. EN 60079-30-1:2017 | EXPLOSIVE ATMOSPHERES - PART 30-1: ELECTRICAL RESISTANCE TRACE HEATING - GENERAL AND TESTING REQUIREMENTS |
| NF EN 12405-1 : 2005 + A2 2010 | GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| S.R. CLC/TR 60079-33:2015 | EXPLOSIVE ATMOSPHERES - PART 33: EQUIPMENT PROTECTION BY SPECIAL PROTECTION 'S' |
| 08/30186475 DC : 0 | BS EN 13617-1 AMD1 - PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS |
| 05/30135286 DC : 0 | EN 15268 - PETROL FILLING STATIONS - SAFETY REQUIREMENTS FOR THE CONSTRUCTION AND PERFORMANCE OF SUBMERSIBLE PUMP ASSEMBLIES |
| 14/30297213 DC : 0 | BS EN 1473 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS |
| I.S. CLC TR 50427:2005 | ASSESSMENT OF INADVERTENT IGNITION OF FLAMMABLE ATMOSPHERES BY RADIO-FREQUENCY RADIATION - GUIDE |
| BS EN 60079-28:2015 | Explosive atmospheres Protection of equipment and transmission systems using optical radiation |
| CEI EN 60079-6 : 2016 | EXPLOSIVE ATMOSPHERES - PART 6: EQUIPMENT PROTECTION BY LIQUID IMMERSION 'O' |
| PREN 12261 : DRAFT 2017 | GAS METERS - TURBINE GAS METERS |
| BS EN 14591-4:2007 | Explosion prevention and protection in underground mines. Protective systems Automatic extinguishing systems for road headers |
| UNE-EN 15714-2:2010 | Industrial valves - Actuators - Part 2: Electric actuators for industrial valves - Basic requirements |
| BS EN 60079-6:2007 | Explosive atmospheres Equipment protected by oil immersion \'o\' |
| DIN EN 15714-2:2010-02 | Industrial valves - Actuators - Part 2: Electric actuators for industrial valves - Basic requirements |
| I.S. EN 60079-7:2015 | EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E' |
| I.S. EN 60079-10-2:2015 | EXPLOSIVE ATMOSPHERES - PART 10-2: CLASSIFICATION OF AREAS - EXPLOSIVE DUST ATMOSPHERES |
| I.S. EN 60079-29-1:2016 | EXPLOSIVE ATMOSPHERES - PART 29-1: GAS DETECTORS - PERFORMANCE REQUIREMENTS OF DETECTORS FOR FLAMMABLE GASES |
| I.S. EN 50050-3:2013 | ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 3: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE FLOCK |
| UNE-EN 60079-29-2:2016 | Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen |
| DIN EN 14593-1:2005-07 | RESPIRATORY PROTECTIVE DEVICES - COMPRESSED AIR LINE BREATHING APPARATUS WITH DEMAND VALVE - PART 1: APPARATUS WITH A FULL FACE MASK - REQUIREMENTS, TESTING, MARKING |
| I.S. EN 50495:2010 | SAFETY DEVICES REQUIRED FOR THE SAFE FUNCTIONING OF EQUIPMENT WITH RESPECT TO EXPLOSION RISKS |
| PREN 1127-2 : DRAFT 2012 | EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING |
| EN 60079-18:2015/A1:2017 | EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION 'M' (IEC 60079-18:2014/A1:2017) |
| BS EN 50174-3 : 2013 | INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS |
| UNE-EN 60079-19:2011 | Explosive atmospheres - Part 19: Equipment repair, overhaul and reclamation |
| I.S. EN 60079-18:2015 | EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION 'M' |
| I.S. EN 60079-14:2014 | EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION |
| DIN EN 13175:2015-02 | LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS |
| UNI CEI EN ISO/IEC 80079-34 : 2012 | EXPLOSIVE ATMOSPHERES - PART 34: APPLICATION OF QUALITY SYSTEMS FOR EQUIPMENT MANUFACTURE |
| DIN EN 16009:2011-10 | Flameless explosion venting devices |
| 17/30356731 DC : 0 | BS EN 12405-1 - GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| S.R. CEN/TR 15339-3:2014 | THERMAL SPRAYING - SAFETY REQUIREMENTS FOR THERMAL SPRAYING EQUIPMENT - PART 3: TORCHES FOR THERMAL SPRAYING AND THEIR CONNECTION AND SUPPLY UNITS |
| CEI EN 60079-28 : 2016 | EXPLOSIVE ATMOSPHERES - PART 28: PROTECTION OF EQUIPMENT AND TRANSMISSION SYSTEMS USING OPTICAL RADIATION |
| BS EN 1127-1:2011 | Explosive atmospheres. Explosion prevention and protection Basic concepts and methodology |
| UNE-EN 60079-7:2016 | Explosive atmospheres - Part 7: Equipment protection by increased safety "e" |
| CLC/TR 60079-32-1:2015 | Explosive atmospheres - Part 32-1: Electrostatic Hazards - Guidance |
| I.S. EN 60079-31:2014 | EXPLOSIVE ATMOSPHERES - PART 31: EQUIPMENT DUST IGNITION PROTECTION BY ENCLOSURE 'T' |
| I.S. EN 50223:2015 | STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE FLOCK MATERIAL - SAFETY REQUIREMENTS |
| I.S. EN 60079-29-4:2010 | EXPLOSIVE ATMOSPHERES - PART 29-4: GAS DETECTORS - PERFORMANCE REQUIREMENTS OF OPEN PATH DETECTORS FOR FLAMMABLE GASES |
| I.S. EN 60079-13:2017 | EXPLOSIVE ATMOSPHERES - PART 13: EQUIPMENT PROTECTION BY PRESSURIZED ROOM 'P' AND ARTIFICIALLY VENTILATED ROOM 'V' |
| NF EN 12312-5 : 2005 + A1 2010 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 5: AIRCRAFT FUELLING EQUIPMENT |
| DIN EN 14678-1:2013-06 | LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers |
| DIN EN 12405-1:2011-04 | GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| DIN EN 13237:2013-01 | POTENTIALLY EXPLOSIVE ATMOSPHERES - TERMS AND DEFINITIONS FOR EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
| DIN EN 14492-2:2016-08 (Draft) | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| DIN EN 12921-3:2010-02 | Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 3: Safety of machines using flammable cleaning liquids (includes Amendment A1:2008) |
| DIN EN 14492-1:2015-05 (Draft) | Cranes - Power driven winches & hoists - part 1 power driven winches; German and English version prEN 14492-1:2015 |
| BS EN 13852-2:2004 | Cranes. Offshore cranes Floating cranes |
| UNE-EN 60079-32-2:2016 | Explosive atmospheres - Part 32-2: Electrostatics hazards - Tests |
| UNE-EN 12779:2016 | Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements |
| BS EN 12581 : 2005 | COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS |
| BS EN 13952:2017 | LPG equipment and accessories. Filling operations for LPG cylinders |
| BS EN 14583:2004 | Workplace atmospheres. Volumetric bioaerosol sampling devices. Requirements and test methods |
| BS EN 14678-1:2013 | LPG equipment and accessories. Construction and performance of LPG equipment for automotive filling stations Dispensers |
| BS EN 137:2006 | Respiratory protective devices. Self-contained open-circuit compressed air breathing apparatus with full face mask. Requirements, testing, marking |
| BS EN 1953:2013 | Atomising and spraying equipment for coating materials. Safety requirements |
| BS EN 13617-2:2012 | Petrol filling stations Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers |
| BS EN 1012-1:2010 | Compressors and vacuum pumps. Safety requirements Air compressors |
| BS EN 13852-1:2013 | Cranes. Offshore cranes General-purpose offshore cranes |
| BS EN 12942 : 1999 | RESPIRATORY PROTECTIVE DEVICES - POWER ASSISTED FILTERING DEVICES INCORPORATING FULL FACE MASKS, HALF MASKS OR QUARTER MASKS - REQUIREMENTS, TESTING, MARKING |
| BS EN 14681 : 2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES |
| BS EN 14492-2 : 2006 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| EN 60079-2:2014/AC:2015 | EXPLOSIVE ATMOSPHERES - PART 2: EQUIPMENT PROTECTION BY PRESSURIZED ENCLOSURE 'P' (IEC 60079-2:2014) |
| EN 1012-3:2013 | Compressors and vacuum pumps - Safety requirements - Part 3: Process compressors |
| EN 1127-2:2014 | Explosive atmospheres - Explosion prevention and protection - Part 2: Basic concepts and methodology for mining |
| EN 12921-3:2005+A1:2008 | Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 3: Safety of machines using flammable cleaning liquids |
| EN 12583:2014 | Gas Infrastructure - Compressor stations - Functional requirements |
| EN 12981:2005+A1:2009 | Coating plants - Spray booths for application of organic powder coating material - Safety requirements |
| EN 62282-5-1:2012 | FUEL CELL TECHNOLOGIES - PART 5-1: PORTABLE FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-5-1:2012) |
| EN 60079-17:2014 | Explosive atmospheres - Part 17: Electrical installations inspection and maintenance |
| EN 61241-11:2006 | Electrical apparatus for use in the presence of combustible dust - Part 11: Protection by intrinsic safety "iD" |
| DIN EN 14583:2004-12 | Workplace atmospheres - Volumetric bioaerosol sampling devices - Requirements and test methods |
| EN 12405-3:2015 | Gas meters - Conversion devices - Part 3: Flow computer |
| EN 1127-1:2011 | Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology |
| EN 50104:2010 | Electrical apparatus for the detection and measurement of oxygen - Performance requirements and test methods |
| EN 45544-1:2015 | WORKPLACE ATMOSPHERES - ELECTRICAL APPARATUS USED FOR THE DIRECT DETECTION AND DIRECT CONCENTRATION MEASUREMENT OF TOXIC GASES AND VAPOURS - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
| EN 1012-1:2010 | Compressors and vacuum pumps - Safety requirements - Part 1: Air compressors |
| DIN EN 13952:2017-09 | LPG EQUIPMENT AND ACCESSORIES - FILLING OPERATIONS FOR LPG CYLINDERS |
| EN 60079-1:2014 | Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" |
| EN 60079-11:2012 | Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" |
| I.S. EN 14583:2004 | WORKPLACE ATMOSPHERES - VOLUMETRIC BIOAEROSOL SAMPLING DEVICES - REQUIREMENTS AND TEST METHODS |
| EN 50628:2016 | Erection of electrical installations in underground mines |
| DIN EN 16299:2013-06 | CATHODIC PROTECTION OF EXTERNAL SURFACES OF ABOVE GROUND STORAGE TANK BASES IN CONTACT WITH SOIL OR FOUNDATIONS |
| EN 60079-29-2:2015 | Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen |
| EN 14583:2004 | Workplace atmospheres - Volumetric bioaerosol sampling devices - Requirements and test methods |
| EN 50050-1:2013 | Electrostatic hand-held spraying equipment - Safety requirements - Part 1: Hand-held spraying equipment for ignitable liquid coating materials |
| EN 60079-6:2015 | Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o" |
| EN 61987-14:2016 | Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 14: Lists of properties (LOP) for temperature measuring equipment for electronic data exchange |
| EN 62282-4-101:2014 | Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks |
| EN 60079-35-1:2011/AC:2011 | EXPLOSIVE ATMOSPHERES - PART 35-1: CAPLIGHTS FOR USE IN MINES SUSCEPTIBLE TO FIREDAMP - GENERAL REQUIREMENTS - CONSTRUCTION AND TESTING IN RELATION TO THE RISK OF EXPLOSION |
| EN 61285:2015 | Industrial-process control - Safety of analyzer houses |
| EN 50050-2:2013 | ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 2: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE COATING POWDER |
| EN 60079-10-2:2015 | Explosive atmospheres - Part 10-2: Classification of areas - Explosive dust atmospheres |
| EN 61310-2:2008 | Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking |
| UNE-EN 12757-1:2006+A1:2010 | Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing |
| ONORM EN 12942 : 2009 | RESPIRATORY PROTECTIVE DEVICES - POWER ASSISTED FILTERING DEVICES INCORPORATING FULL FACE MASKS, HALF MASKS OR QUARTER MASKS - REQUIREMENTS, TESTING, MARKING |
| UNE-EN 12757-1:2006 | Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing |
| UNE-EN 1804-3:2007 | Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3: Hydraulic control systems |
| IEC 60243-1:2013 | Electric strength of insulating materials - Test methods - Part 1: Tests at power frequencies |
| IEC 60079-1:2014 RLV | Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" |
| ISO/IEC 17000:2004 | Conformity assessment Vocabulary and general principles |
| EN ISO 4027:2003 | Hexagon socket set screws with cone point (ISO 4027:2003) |
| EN 60079-26:2015 | Explosive atmospheres - Part 26: Equipment with Equipment Protection Level (EPL) Ga |
| EN 60192:2001 | Low pressure sodium vapour lamps - Performance specifications |
| EN 60216-1:2013 | Electrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results |
| EN 60079-27:2008 | Explosive atmospheres - Part 27: Fieldbus intrinsically safe concept (FISCO) |
| ISO 3601-2:2016 | Fluid power systems — O-rings — Part 2: Housing dimensions for general applications |
| EN 61241-4:2006 | Electrical apparatus for use in the presence of combustible dust - Part 4: Type of protection "pD" |
| EN ISO 4029:2003 | Hexagon socket set screws with cup point (ISO 4029:2003) |
| IEC 60896-11:2002 | Stationary lead-acid batteries - Part 11: Vented types - General requirements and methods of tests |
| EN 62013-1:2006 | Caplights for use in mines susceptible to firedamp - Part 1: General requirements - Construction and testing in relation to the risk of explosion |
| EN 61427:2005 | Secondary cells and batteries for photovoltaic energy systems (PVES) - General requirements and methods of test |
| EN 60079-1:2014 | Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" |
| EN 60079-10-1:2015 | Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres |
| IEC 61427:2005 | Secondary cells and batteries for photovoltaic energy systems (PVES) - General requirements and methods of test |
| IEC 60662:2011 | High-pressure sodium vapour lamps - Performance specifications |
| IEC 60192:2001 | Low-pressure sodium vapour lamps - Performance specifications |
| IEC 61960:2011 | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for portable applications |
| EN 60034-1:2010/corrigendum Oct. 2010 | ROTATING ELECTRICAL MACHINES - PART 1: RATING AND PERFORMANCE |
| ISO 14583:2011 | Hexalobular socket pan head screws |
| IEC 60079-19:2010+AMD1:2015 CSV | Explosive atmospheres - Part 19: Equipment repair, overhaul and reclamation |
| EN 60623:2017 | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Vented nickel-cadmium prismatic rechargeable single cells |
| IEC 60034-29:2008 | Rotating electrical machines - Part 29: Equivalent loading and superposition techniques - Indirect testing to determine temperature rise |
| EN 61951-1:2017 | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary sealed cells and batteries for portable applications - Part 1: Nickel-cadmium |
| IEC 60079-17:2013 | Explosive atmospheres - Part 17: Electrical installations inspection and maintenance |
| EN 60079-15:2010 | Explosive atmospheres - Part 15: Equipment protection by type of protection "n" |
| EN 60079-19:2011/A1:2015 | EXPLOSIVE ATMOSPHERES - PART 19: EQUIPMENT REPAIR, OVERHAUL AND RECLAMATION (IEC 60079-19:2010) |
| EN ISO 527-2:2012 | Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012) |
| IEC 60896-21:2004 | Stationary lead-acid batteries - Part 21: Valve regulated types - Methods of test |
| IEC 60079-18:2014 RLV | Explosive atmospheres - Part 18: Equipment protection by encapsulation “m” |
| ISO 4225:1994 | Air quality General aspects Vocabulary |
| EN 20273:1991 | Fasteners - Clearance holes for bolts and screws (ISO 273:1979) |
| EN 60079-10-2:2015 | Explosive atmospheres - Part 10-2: Classification of areas - Explosive dust atmospheres |
| EN ISO 4026:2003 | Hexagon socket set screws with flat point (ISO 4026:2003) |
| IEC 60079-10-1:2015 | Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres |
| EN 61056-1:2012 | General purpose lead-acid batteries (valve-regulated types) - Part 1: General requirements, functional characteristics - Methods of test |
| ISO 4017:2014 | Fasteners Hexagon head screws Product grades A and B |
| IEC 60079-20-1:2010 | Explosive atmospheres - Part 20-1: Material characteristics for gas and vapour classification - Test methods and data |
| EN 60079-6:2015 | Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o" |
| EN ISO 4014:2011 | Hexagon head bolts - Product grades A and B (ISO 4014:2011) |
| IEC 60216-2:2005 | Electrical insulating materials - Thermal endurance properties - Part 2: Determination of thermal endurance properties of electrical insulating materials - Choice of test criteria |
| ISO 4032:2012 | Hexagon regular nuts (style 1) — Product grades A and B |
| EN 60079-28:2015 | Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation |
| EN 60947-1:2007/A2:2014 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES (IEC 60947-1:2007/A2:2014) |
| IEC 60079-5:2015 RLV | Explosive atmospheres - Part 5: Equipment protection by powder filling "q" |
| ISO 527-2:2012 | Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics |
| IEC 62013-1:2005 | Caplights for use in mines susceptible to firedamp - Part 1: General requirements - Construction and testing in relation to the risk of explosion |
| IEC 60050-426:2008 | International Electrotechnical Vocabulary (IEV) - Part 426: Equipment for explosive atmospheres |
| EN 14986:2017 | Design of fans working in potentially explosive atmospheres |
| EN 60216-2:2005 | Electrical insulating materials - Thermal endurance properties - Part 2: Determination of thermal endurance properties of electrical insulating materials - Choice of test criteria |
| EN 60079-31:2014 | Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t" |
| ISO 4762:2004 | Hexagon socket head cap screws |
| EN 60079-30-1:2017 | Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements |
| EN 60079-11:2012 | Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" |
| ISO 262:1998 | ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts |
| IEC 60079-11:2011 | Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" |
| EN 61951-2:2017 | Secondary cells and batteries containing alkaline or other non acid electrolytes - Secondary sealed cells and batteries for portable applications - Part 2: Nickel-metal hydride |
| EN ISO 4028:2003 | Hexagon socket set screws with dog point (ISO 4028:2003) |
| ISO 4027:2003 | Hexagon socket set screws with cone point |
| IEC 60079-27:2008 | Explosive atmospheres - Part 27: Fieldbus intrinsically safe concept (FISCO) |
| IEC 61951-2:2017 | Secondary cells and batteries containing alkaline or other non acid electrolytes - Secondary sealed cells and batteries for portable applications - Part 2: Nickel-metal hydride |
| EN ISO 7380-1:2011 | Button head screws - Part 1: Hexagon socket button head screws (ISO 7380-1:2011) |
| IEC TS 60034-25:2014 | Rotating electrical machines - Part 25: AC electrical machines used in power drive systems - Application guide |
| EN 60079-25:2010/AC:2013 | EXPLOSIVE ATMOSPHERES - PART 25: INTRINSICALLY SAFE ELECTRICAL SYSTEMS (IEC 60079-25:2010) |
| IEC 61951-1:2017 | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary sealed cells and batteries for portable applications - Part 1: Nickel-Cadmium |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| IEC TS 60034-17:2006 | Rotating electrical machines - Part 17: Cage induction motors when fed from converters - Application guide |
| IEC 60947-1:2007+AMD1:2010+AMD2:2014 CSV | Low-voltage switchgear and controlgear - Part 1: General rules |
| IEC 61056-1:2012 | General purpose lead-acid batteries (valve-regulated types) - Part 1: General requirements, functional characteristics - Methods of test |
| EN 60086-1:2015 | Primary batteries - Part 1: General |
| ISO 4029:2003 | Hexagon socket set screws with cup point |
| IEC 60423:2007 | Conduit systems for cable management - Outside diameters of conduits for electrical installations and threads for conduits and fittings |
| IEC 60079-25:2010 | Explosive atmospheres - Part 25: Intrinsically safe electrical systems |
| EN 60896-11:2003 | Stationary lead-acid batteries - Part 11: Vented types - General requirements and methods of tests |
| EN 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
| IEC 60079-6:2015 | Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o" |
| EN 60034-29:2008 | Rotating electrical machines - Part 29: Equivalent loading and superposition techniques - Indirect testing to determine temperature rise |
| EN 61960:2011 | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for portable applications |
| CLC/TS 60034-25:2008 | Rotating electrical machines - Part 25: Guidance for the design and performance of a.c. motors specifically designed for converter supply |
| IEC 60034-1:2017 | Rotating electrical machines - Part 1: Rating and performance |
| IEC 60086-1:2015 | Primary batteries - Part 1: General |
| IEC 60079-14:2013 | Explosive atmospheres - Part 14: Electrical installations design, selection and erection |
| ISO 4026:2003 | Hexagon socket set screws with flat point |
| EN 60243-1:2013 | ELECTRIC STRENGTH OF INSULATING MATERIALS - TEST METHODS - PART 1: TESTS AT POWER FREQUENCIES (IEC 60243-1:2013) |
| EN ISO 4017:2014 | Fasteners - Hexagon head screws - Product grades A and B (ISO 4017:2014) |
| EN 60079-20-1:2010 | Explosive atmospheres - Part 20-1: Material characteristics for gas and vapour classification - Test methods and data |
| ISO 286-2:2010 | Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts |
| IEC 61241-4:2001 | Electrical apparatus for use in the presence of combustible dust - Part 4: Type of protection "pD" |
| ISO 273:1979 | Fasteners — Clearance holes for bolts and screws |
| EN 60079-14:2014/AC:2016 | EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION (IEC 60079-14:2013/COR1:2016) |
| ISO 4892-2:2013 | Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps |
| EN 60622:2003 | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-cadmium prismatic rechargeable single cells |
| IEC 60079-31:2013 | Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t" |
| EN 60079-5:2015 | Explosive atmospheres - Part 5: Equipment protection by powder filling "q" |
| ISO 965-1:2013 | ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data |
| IEC 60079-30-1:2007 | Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements |
| EN 60079-17:2014 | Explosive atmospheres - Part 17: Electrical installations inspection and maintenance |
| EN ISO 4032:2012 | Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012) |
| ISO 3601-1:2012 | Fluid power systems — O-rings — Part 1: Inside diameters, cross-sections, tolerances and designation codes |
| ISO 7380-1:2011 | Button head screws — Part 1: Hexagon socket button head screws |
| IEC 61241-2-1:1994 | Electrical apparatus for use in the presence of combustible dust - Part 2: Test methods - Section 1: Methods for determining the minimum ignition temperatures of dust |
| EN ISO 14583:2011 | Hexalobular socket pan head screws (ISO 14583:2011) |
| EN ISO/IEC 17000:2004 | Conformity assessment - Vocabulary and general principles (ISO/IEC 17000:2004) |
| CLC/TR 50427:2004 | Assessment of inadvertent ignition of flammable atmospheres by radio-frequency radiation - Guide |
| ISO 4028:2003 | Hexagon socket set screws with dog point |
| ISO 7380:2004 | Hexagon socket button head screws |
| EN 60662:2012 | High-pressure sodium vapour lamps - Performance specifications |
| EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
| CLC/TS 60034-17:2004 | Rotating electrical machines - Part 17: Cage induction motors when fed from converters - Application guide |
| ISO 965-3:1998 | ISO general purpose metric screw threads Tolerances Part 3: Deviations for constructional screw threads |
| IEC 60623:2017 | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Vented nickel-cadmium prismatic rechargeable single cells |
| ISO 178:2010 | Plastics Determination of flexural properties |
| IEC 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
| EN 60896-21:2004 | Stationary lead-acid batteries - Part 21: Valve regulated types - Methods of test |
| EN ISO 4892-2:2013 | Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013) |
| IEC 60216-1:2013 | Electrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results |
| IEC 60079-15:2010 | Explosive atmospheres - Part 15: Equipment protection by type of protection "n" |
| IEC 60079-26:2014 RLV | Explosive atmospheres - Part 26: Equipment with Equipment Protection Level (EPL) Ga |
| EN 60034-5:2001/A1:2007 | ROTATING ELECTRICAL MACHINES - PART 5: DEGREES OF PROTECTION PROVIDED BY THE INTEGRAL DESIGN OF ROTATING ELECTRICAL MACHINES (IP CODE) - CLASSIFICATION |
| EN ISO 4762:2004 | Hexagon socket head cap screws (ISO 4762:2004, Corrected version 2024-08) |
| ISO 1817:2015 | Rubber, vulcanized or thermoplastic Determination of the effect of liquids |
| 1994/9/EC : 1994 | DIRECTIVE 94/9/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL OF 23 MARCH 1994 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
| ISO 4014:2011 | Hexagon head bolts Product grades A and B |
| IEC 60095-1:2006 | Lead-acid starter batteries - Part 1: General requirements and methods of test |
| EN 60423:2007 | Conduit systems for cable management - Outside diameters of conduits for electrical installations and threads for conduits and fittings |
| IEC 60622:2002 | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-cadmium prismatic rechargeable single cells |
| EN 60079-2:2014/AC:2015 | EXPLOSIVE ATMOSPHERES - PART 2: EQUIPMENT PROTECTION BY PRESSURIZED ENCLOSURE 'P' (IEC 60079-2:2014) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.