EN 50194:2000
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Electrical apparatus for the detection of combustible gases in domestic premises - Part 1: Test methods and performance requirements
01-01-2009
31-03-2000
1 Scope
2 Normative references
3 Definitions
4 General requirements
4.1 General
4.2 Construction
4.3 Indicators and alarms
4.4 Fault signals
4.5 Output signal (applicable for type A
apparatus only)
4.6 Labelling and instructions
5 Test and performance requirements
5.1 General requirements for tests
5.2 Normal conditions for tests
5.3 Test methods and performance requirements
6 Self-contained battery powered apparatus
6.1 Battery fault warning
6.2 Battery capacity
6.3 Battery reversal
6.4 Battery connections
Annex A (informative) Location of the gas detection
apparatus - Guide for writing the instruction
booklet
Annex B (informative) Emergency actions - Guide for writing
the instruction booklet
Annex C (informative) A-deviations
Gives general requirements for the construction, testing and performance of electrically operated apparatus for the detection of combustible gases, designed for continuous operation in a fixed installation in domestic premises.
| Committee |
CLC/TC 216
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| DIN EN 50194 : 2000 | Identical |
| NBN EN 50194 : 1ED 2000 | Identical |
| SN EN 50194 : 2000 | Identical |
| I.S. EN 50194:2000 | Identical |
| CEI UNI EN 50194 : 2001 | Identical |
| VDE 0400-30-1 : 2009 | Identical |
| NEN EN 50194 : 2000 | Identical |
| PN EN 50194 : 2005 | Identical |
| GOST R EN 50194 : 2008 | Identical |
| NF EN 50194 : 2000 CORR 1 2000 | Identical |
| BS EN 50194:2000 | Identical |
| UNE-EN 50194:2001 | Identical |
| CEI 216-8 : 2005 | FLUSH-TYPE DETECTORS FOR THE DETECTION OF COMBUSTIBLE GASES IN DOMESTIC PREMISES - TEST METHODS AND PERFORMANCE REQUIREMENTS |
| CEI 216-5/1 : 2002 | ELECTRICAL EQUIPMENT FOR THE DETECTION AND THE MEASUREMENT OF BURNING VAPOURS OR GASES OR TOXIC AND OF OXYGEN FOR CONTINUOUS OPERATION IN FIXED INSTALLATIONS IN NON-HAZARDOUS AREAS - PART 1:GENERAL REQUIREMENTS AND TEST METHODS FOR CONTROL BOARDS AND CONTROL AND SIGNALLING BOARDS |
| CEI 216-5/3 : 2002 | ELECTRICAL EQUIPMENT FOR THE DETECTION AND THE MEASUREMENT OF FLAMMABLE VAPOURS OR GASES OR TOXIC AND OF OXYGEN FOR CONTINUOUS OPERATION IN FIXED INSTALLATIONS IN NON-HAZARDOUS AREAS - PART 3:GENERAL REQUIREMENTS AND TEST METHODS FOR DETECTORS OF GASES AND FLAMMABLE VAPOURS WITH PROPORTIONAL OUTPUTS |
| UNE-EN 50244:2001 | Electrical apparatus for the detection of combustible gases in domestic premises - Guide on the selection, installation, use and maintenance. |
| CEI 216-5/2 : 2002 | ELECTRICAL EQUIPMENT FOR THE DETECTION AND THE MEASUREMENT OF BURNING VAPOURS OR GASES OR TOXIC AND OF OXYGEN FOR CONTINUOUS OPERATION IN FIXED INSTALLATIONS IN NON-HAZARDOUS AREAS PART 2:GENERAL REQUIREMENTS AND TEST METHODS FOR DETECTORS OF GASES AND FLAMMABLE VAPOURS WITH ONE OR MORE FIXED ALARM LEVELS |
| EN 50270:2015 | Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen |
| EN 50058:1998 | Electrical apparatus for the detection and measurement of combustible gases - Performance requirements for Group II apparatus indicating up to 100 % (v/v) gas |
| EN 1775:2007 | Gas supply - Gas pipework for buildings - Maximum operating pressure less than or equal to 5 bar - Functional recommendations |
| EN 50054:1998 | Electrical apparatus for the detection and measurement of combustible gases - General requirements and test methods |
| EN 50291:2001 | Electrical apparatus for the detection of carbon monoxide in domestic premises - Test methods and performance requirements |
| EN 50055:1998 | Electrical apparatus for the detection and measurement of combustible gases - Performance requirements for Group I apparatus indicating up to 5 % (v/v) methane in air |
| EN 50057:1998 | Electrical apparatus for the detection and measurement of combustible gases - Performance requirements for Group II apparatus indicating up to 100 % lower explosive limit |
| EN 437:2003+A1:2009 | Test gases - Test pressures - Appliance categories |
| EN 60335-1:2012/A13:2017 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED) |
| EN 60704-1:2010/A11:2012 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - TEST CODE FOR THE DETERMINATION OF AIRBORNE NOISE - PART 1: GENERAL REQUIREMENTS (IEC 60704-1:2010) |
| EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
| EN 50056:1998 | Electrical apparatus for the detection and measurement of combustible gases - Performance requirements for Group I apparatus indicating up to 100 % (v/v) methane in air |
| EN 50244:2016 | Electrical apparatus for the detection of combustible gases in domestic premises - Guide on the selection, installation, use and maintenance |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Logging out.