EN 50131-1:2006/A2:2017
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 1: SYSTEM REQUIREMENTS
Superseded date
07-07-2020
Superseded by
Published date
12-01-2013
Introduction
1 Scope
2 Normative references
3 Definitions and abbreviations
4 System functions
5 System components
6 Security grading
7 Environmental classification
8 Functional requirements
9 Power supply
10 Operational reliability
11 Functional reliability
12 Environmental requirements
13 Electrical safety
14 Documentation
15 Marking/Identification
Annex A (normative) - Special national conditions
Bibliography
Describes the requirements for Intrusion and Hold-up Alarm Systems installed in buildings using specific or non-specific wired interconnections or wire-free interconnections.
| Committee |
TC 79
|
| DevelopmentNote |
Supersedes ENV 50131-1. (04/2003) Supersedes PREN 50131-1. (03/2008)
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| I.S. EN 50131-1:2006/A2:2017 | Identical |
| NF EN 50131-1 : 2007 AMD 2 2017 | Identical |
| NEN EN 50131-1 : 2006 AMD 2 2017 | Identical |
| BS EN 50131-1 : 2006 | Identical |
| NBN EN 50131-1 : 2007 AMD 2 2010 | Identical |
| CEI EN 50131-1 : 2012 | Identical |
| I.S. EN 50131-1:2006 | Identical |
| UNE-EN 50131-1:2008 | Identical |
| PN EN 50131-1 : 2009 AMD 2 2017 | Identical |
| SN EN 50131-1 : 2006 AMD 2 2017 | Identical |
| VDE 0830-2-1 : 2017 | Identical |
| BS EN 50131-1:2006+A2:2017 | Identical |
| DIN EN 50131-1 : 2017 | Identical |
| ONORM OVE EN 50131-1 : 2018 | Identical |
| 08/30180887 DC : DRAFT MAY 2008 | BS EN 50131-4 - ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 4: WARNING DEVICES |
| BS EN 50131-2-7-3 : 2012 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-3: INTRUSION DETECTORS - GLASS BREAK DETECTORS (ACTIVE) |
| CLC/TS 50131-2-5:2004 | Alarm systems - Intrusion systems - Part 2-5: Requirements for combined passive infrared and ultrasonic detectors |
| DD CLC/TS 50131-2-7-3:2009 | Alarm systems. Intrusion and hold-up systems Intrusion detectors. Glass break detectors (active) |
| CEI EN 50136-1 : 2013 | ALARM SYSTEMS - ALARM TRANSMISSION SYSTEMS AND EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR ALARM TRANSMISSION SYSTEMS |
| 08/30183528 DC : 0 | BS EN 50518-2 - ALARM SYSTEMS - MONITORING AND ALARM RECEIVING CENTER - PART 2: TECHNICAL REQUIREMENTS |
| DD CLC/TS 50131-7:2010 | Alarm systems. Intrusion and hold-up systems Application guidelines |
| CLC/TS 50131-2-6:2004 | Alarm systems - Intrusion systems - Part 2-6: Requirements for opening contacts (magnetic) |
| BS EN 50131-2-4:2008 | Alarm systems. Intrusion and hold-up systems Requirements for combined passive infrared and microwave detectors |
| I.S. EN 50131-2-4:2008 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-4: REQUIREMENTS FOR COMBINED PASSIVE INFRARED AND MICROWAVE DETECTORS |
| 16/30349685 DC : 0 | BS EN 50131-2-2 - ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-2: INTRUSION DETECTORS - PASSIVE INFRARED DETECTORS |
| BS EN 50131-2-6:2008 | Alarm systems. Intrusion and hold-up systems Opening contacts (magnetic) |
| 99/702756 DC : DRAFT JAN 99 | PREN 50131-7 - ALARM SYSTEMS - INTRUSION SYSTEMS - PART 7: APPLICATION GUIDELINES |
| 07/30170080 DC : DRAFT AUG 2007 | PREN 50131-2-6 - ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-6: OPENING CONTACTS (MAGNETIC) |
| BS EN 50131-2-2:2017 | Alarm systems. Intrusion and hold-up systems Intrusion detectors. Passive infrared detectors |
| BS EN 50131-5-3:2017 | Alarm systems. Intrusion systems Requirements for interconnections equipment using radio frequency techniques |
| PD CLC/TS 50136-7:2017 | Alarm systems. Alarm transmission systems and equipment Application guidelines |
| PD CLC/TS 50661-1:2017 | Alarm systems. External perimeter security systems System requirements |
| 08/30152055 DC : DRAFT APR 2008 | BS EN 50518-1 - MONITORING AND ALARM RECEIVING CENTER - PART 1: LOCATION AND CONSTRUCTION REQUIREMENTS |
| DD CLC/TS 50131-2-3:2004 | Alarm systems. Intrusion systems Requirements for microwave detectors |
| CEI UNI EN 50518-1 : 2015 | MONITORING AND ALARM RECEIVING CENTRE - PART 1: LOCATION AND CONSTRUCTION REQUIREMENTS |
| I.S. TS 50136-7:2004 | ALARM SYSTEMS - ALARM TRANSMISSION SYSTEMS AND EQUIPMENT - PART 7: APPLICATION GUIDELINES |
| CLC/TS 50131-2-3:2004 | Alarm systems - Intrusion systems - Part 2-3: Requirements for microwave detectors |
| I.S. EN 50131-2-2:2017 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-2: INTRUSION DETECTORS - PASSIVE INFRARED DETECTORS |
| PD CLC/TS 50131-2-9:2016 | Alarm systems. Intrusion and hold-up systems Intrusion detectors. Active infrared beam detectors |
| BS EN 50131-2-7-2 : 2012 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-2: INTRUSION DETECTORS - GLASS BREAK DETECTORS (PASSIVE) |
| I.S. EN 50136-1:2012 | ALARM SYSTEMS - ALARM TRANSMISSION SYSTEMS AND EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR ALARM TRANSMISSION SYSTEMS |
| BS EN 50131-2-5:2008 | Alarm systems. Intrusion and hold-up systems Requirements for combined passive infrared and ultrasonic detectors |
| CEI UNI EN 50518-2 : 2015 | MONITORING AND ALARM RECEIVING CENTRE - PART 2: TECHNICAL REQUIREMENTS |
| BS EN 50131-8:2009 | Alarm systems. Intrusion and hold-up systems Security fog device/systems |
| PD CLC/TS 50131-2-10:2014 | Alarm systems. Intrusion and hold-up systems Intrusion detectors. Lock state contacts (magnetic) |
| CLC/TS 50136-7:2017 | Alarm systems - Alarm transmission systems and equipment - Part 7: Application guidelines |
| CLC/TS 50661-1:2017 | Alarm systems - External perimeter security systems - Part 1: System requirements |
| PREN 50131-2-10 : DRAFT 2017 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-10: INTRUSION DETECTORS - LOCK STATE CONTACTS (MAGNETIC) |
| PREN 50136-1 : DRAFT 2009 | ALARM SYSTEMS - ALARM TRANSMISSION SYSTEMS - PART 1: GENERAL REQUIREMENTS FOR ALARM TRANSMISSION SYSTEMS |
| S.R. CLC/TS 50131-2-7-3:2009 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-3: INTRUSION DETECTORS - GLASS BREAK DETECTORS (ACTIVE) |
| S.R. CEN TR 14383-5:2010 | PREVENTION OF CRIME - URBAN PLANNING AND BUILDING DESIGN - PART 5: PETROL STATIONS |
| EN 50136-1:2012 | Alarm systems - Alarm transmission systems and equipment - Part 1: General requirements for alarm transmission systems |
| CEI EN 50131-2-3 : 2009 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-3: REQUIREMENTS FOR MICROWAVE DETECTORS |
| I.S. EN 50131-2-7-1:2012 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-1: INTRUSION DETECTORS - GLASS BREAK DETECTORS (ACOUSTIC) |
| UNI CEI EN 50518-1 : 2014 | MONITORING AND ALARM RECEIVING CENTRE - PART 1: LOCATION AND CONSTRUCTION REQUIREMENTS |
| S.R. CLC/TS 50131-9:2014 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 9: ALARM VERIFICATION - METHODS AND PRINCIPLES |
| OVE/ONORM EN 50131-2-4 : 2008 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-4: REQUIREMENTS FOR COMBINED PASSIVE INFRARED AND MICROWAVE DETECTORS |
| CLC/TS 50131-3:2003 | Alarm systems - Intrusion systems - Part 3: Control and indicating equipment |
| CEN/TS 14383-4:2006 | Prevention of crime - Urban planning and design - Part 4: Shops and offices |
| EN 50518-2:2013 | Monitoring and alarm receiving centre - Part 2: Technical requirements |
| EN 50131-8:2009 | Alarm systems - Intrusion and hold-up systems - Part 8: Security fog device/systems |
| CLC/TS 50131-12:2016 | Alarm systems - Intrusion and hold-up systems - Part 12: Methods and requirements for setting and unsetting of Intruder Alarm Systems (IAS) |
| EN 50131-10:2014 | Alarm systems - Intrusion and hold-up systems - Part 10: Application specific requirements for Supervised Premises Transceiver (SPT) |
| EN 50131-2-8:2016 | Alarm systems - Intrusion and hold-up systems - Part 2-8: Intrusion detectors - Shock detectors |
| EN 50518-1:2013 | Monitoring and alarm receiving centre - Part 1: Location and construction requirements |
| OVE/ONORM EN 50131-2-3 : 2009 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-3: REQUIREMENTS FOR MICROWAVE DETECTORS |
| PD CEN/TR 14383-5:2010 | Prevention of crime. Urban planning and building design Petrol stations |
| 99/703461 DC : DRAFT AUG 1999 | BS EN 50131-2-2 - ALARM SYSTEMS - INTRUSION SYSTEMS - PART 2-2: REQUIREMENTS FOR PASSIVE INFRARED DETECTORS |
| S.R. CEN TR 14383-8:2009 | PREVENTION OF CRIME - URBAN PLANNING AND BUILDING DESIGN - PART 8: PROTECTION OF BUILDINGS AND SITES AGAINST CRIMINAL ATTACKS WITH VEHICLES |
| PREN 50518-2 : DRAFT 2008 | MONITORING AND ALARM RECEIVING CENTRE - PART 2: REQUIREMENTS FOR TECHNICAL FACILITIES |
| S.R. CLC/TS 50661-1:2017 | ALARM SYSTEMS - EXTERNAL PERIMETER SECURITY SYSTEMS - PART 1: SYSTEM REQUIREMENTS |
| I.S. EN 50131-2-7-2:2012 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-2: INTRUSION DETECTORS - GLASS BREAK DETECTORS (PASSIVE) |
| 02/708067 DC : DRAFT SEP 2002 | BS EN 50131-2-4 - ALARM SYSTEMS - INTRUSION SYSTEMS - PART 2-4: REQUIREMENTS FOR COMBINED PASSIVE INFRARED AND MICROWAVE DETECTORS |
| PD CLC/TS 50131-11:2012 | Alarm systems. Intrusion and hold-up systems Hold-up devices |
| DD CLC/TS 50131-2-4:2004 | Alarm systems. Intrusion systems Requirements for combined passive infrared and microwave detectors |
| 99/702646 DC : DRAFT JAN 1999 | EN 50131-5-3 - ALARM SYSTEMS - INTRUSION SYSTEMS - PART 5-3 - REQUIREMENTS FOR INTRUSION ALARM EQUIPMENT USING RADIO FREQUENCY TECHNIQUES |
| CEI EN 50131-2-6 : 2009 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-6: OPENING CONTACTS (MAGNETIC) |
| 16/30299837 DC : 0 | BS EN 50131-6 - ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 6: POWER SUPPLIES |
| 16/30339543 DC : 0 | BS EN 62820-3-2 ED 1.0 - BUILDING INTERCOM SYSTEMS - PART 3-2: APPLICATION GUIDELINES - ADVANCED SECURITY BUILDING INTERCOM |
| BS EN 50131-2-8:2016 | Alarm systems. Intrusion and hold-up systems Intrusion detectors. Shock detectors |
| S.R. CLC/TS 50131-2-7-1:2009 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-1: INTRUSION DETECTORS - GLASS BREAK DETECTORS (ACOUSTIC) |
| 10/30227151 DC : 0 | BS EN 50131-9: 2010 - ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 9: ALARM VERIFICATION - METHODS AND PRINCIPLES |
| PREN 50131-6 : DRAFT 2016 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 6: POWER SUPPLIES |
| DD CEN/TS 14383-3:2005 | Prevention of crime. Urban planning and building design Dwellings |
| BS EN 50131-3:2009 | Alarm systems. Intrusion and hold-up systems Control and indicating equipment |
| CEI CLC/TS 50131-5-4 : 2013 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 5-4: SYSTEM COMPATIBILITY TESTING FOR I&HAS EQUIPMENTS LOCATED IN SUPERVISED PREMISES |
| I.S. EN 50131-2-5:2008 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-5: REQUIREMENTS FOR COMBINED PASSIVE INFRARED AND ULTRASONIC DETECTORS |
| S.R. CLC/TS 50131-7:2010 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 7: APPLICATION GUIDELINES |
| UNE-EN 50131-10:2014 | Alarm systems - Intrusion and hold-up systems - Part 10: Application specific requirements for Supervised Premises Transceiver (SPT) |
| I.S. CLC TS 50131-3:2003 | ALARM SYSTEMS - INTRUSION SYSTEMS - PART 3: CONTROL AND INDICATING EQUIPMENT |
| S.R. CEN/TS 14383-3:2005 | PREVENTION OF CRIME - URBAN PLANNING AND BUILDING DESIGN - PART 3: DWELLINGS |
| I.S. EN 50131-4:2009 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 4: WARNING DEVICES |
| I.S. EN 50131-8:2009 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 8: SECURITY FOG DEVICE/SYSTEMS |
| I.S. EN 50518-2:2013 | MONITORING AND ALARM RECEIVING CENTRE - PART 2: TECHNICAL REQUIREMENTS |
| I.S. EN 50131-2-8:2016 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-8: INTRUSION DETECTORS - SHOCK DETECTORS |
| I.S. EN 50131-2-7-3:2012 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-3: INTRUSION DETECTORS - GLASS BREAK DETECTORS (ACTIVE) |
| DIN EN 15713:2009-08 | Secure destruction of confidential material - Code of practice |
| CEI EN 50131-2-4 : 2008 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-4: REQUIREMENTS FOR COMBINED PASSIVE INFRARED AND MICROWAVE DETECTORS |
| EN 50131-2-2:2017 | Alarm systems - Intrusion and hold-up systems - Part 2-2: Intrusion detectors - Passive infrared detectors |
| CLC/TS 50131-2-7-1:2009 | Alarm systems - Intrusion and hold-up systems - Part 2-7-1: Intrusion detectors - Glass break detectors (acoustic) |
| CEI EN 50131-4 : 2010 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 4: WARNING DEVICES |
| CEI CLC/TS 50136-7 : 2004 | ALARM SYSTEMS - ALARM TRANSMISSION SYSTEMS AND EQUIPMENT - PART 7: APPLICATION GUIDELINES |
| UNE-EN 50518-1:2014 | Monitoring and alarm receiving centre - Part 1: Location and construction requirements |
| UNE-EN 15713:2010 | Secure destruction of confidential material - Code of practice |
| I.S. CLC/TS 50131-7:2003 | ALARM SYSTEMS - INTRUSION SYSTEMS - PART 7: APPLICATION GUIDELINES |
| EN 50131-2-4:2008 | Alarm systems - Intrusion and hold-up systems - Part 2-4: Requirements for combined passive infrared and microwave detectors |
| VDI 4705:2013-05 | Lifts - Emergency alarm management |
| BS EN 15713:2009 | Secure destruction of confidential material. Code of practice |
| 17/30353695 DC : 0 | BS EN 50131-4 - ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 4: WARNING DEVICES |
| UTEC 48 331-1 : 2007 | INTERPRETATIONS OF THE TECHNICAL COMMITTEE CLC/TC 79 "ALARM SYSTEMS" ON THE EUROPEAN STANDARD EN 50131-1:2006 "ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 1: SYSTEM REQUIREMENTS" |
| 07/30162539 DC : 0 | BS EN 50131-2-2 - ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-2: INTRUSION DETECTORS - PASSIVE INFRARED DETECTORS |
| 17/30350085 DC : DRAFT SEP 2017 | BS EN 50131-8 - ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 8: SECURITY FOG DEVICES |
| BS EN 50518-1:2013 | Monitoring and alarm receiving centre Location and construction requirements |
| I.S. EN 50131-2-6:2008 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-6: OPENING CONTACTS (MAGNETIC) |
| BS EN 50131-10:2014 | Alarm systems. Intrusion and hold-up systems Application specific requirements for Supervised Premises Transceiver (SPT) |
| S.R. CLC/TS 50136-7:2017 | ALARM SYSTEMS - ALARM TRANSMISSION SYSTEMS AND EQUIPMENT - PART 7: APPLICATION GUIDELINES |
| DD CEN/TS 14383-4:2006 | Prevention of crime. Urban planning and design Shops and offices |
| 15/30260747 DC : 0 | BS EN 50131-5-3 - ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 5-3: REQUIREMENTS FOR INTERCONNECTIONS EQUIPMENT USING RADIO FREQUENCY TECHNIQUES |
| DD CLC/TS 50131-2-5:2004 | Alarm systems. Intrusion systems Requirements for combined passive infrared and ultrasonic detectors |
| DD CLC/TS 50131-2-7-2:2009 | Alarm systems. Intrusion and hold-up systems Intrusion detectors. Glass break detectors (passive) |
| PREN 50131-9 : DRAFT 2010 | ALARM SYSTEMS - INTRUSION AND HOLD UP SYSTEMS - PART 9: ALARM VERIFICATION - METHODS AND PRINCIPLES |
| UNI CEN/TS 14383-3 : 2006 | PREVENTION OF CRIME - URBAN PLANNING AND BUILDING DESIGN - PART 3: DWELLINGS |
| 08/30180103 DC : DRAFT MAR 2008 | BS EN 50136-1 - ALARM SYSTEMS - ALARM TRANSMISSION SYSTEMS - PART 1: GENERAL REQUIREMENTS FOR ALARM TRANSMISSION SYSTEMS |
| PD CLC/TR 50531:2009 | Alarm systems. Terms and definitions |
| CEI EN 50131-2-7-1 : 2013 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-1: INTRUSION DETECTORS - GLASS BREAK DETECTORS (ACOUSTIC) |
| UNE-CEN/TR 14383-8:2011 IN | Prevention of crime - Urban planning and building design - Part 8: Protection of buildings and sites against criminal attacks with vehicles |
| 07/30166949 DC : DRAFT AUG 2007 | BS EN 15713 - SECURE DESTRUCTION OF CONFIDENTIAL MATERIAL - CODE OF PRACTICE |
| 17/30358216 DC : DRAFT AUG 2017 | BS EN 50131-2-10 - ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-10: INTRUSION DETECTORS - LOCK STATE CONTACTS (MAGNETIC) |
| CEI CLC/TS 50131-2-11 : 1ED 2017 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-11: INTRUSION DETECTORS - ALDDR |
| CEN/TR 14383-5:2010 | Prevention of crime - Urban planning and building design - Part 5: Petrol stations |
| PREN 50518 : DRAFT 2016 | MONITORING AND ALARM RECEIVING CENTRE |
| BS EN 50136-2-1:1998 | Alarm systems. Alarm transmission systems and equipment General requirements for alarm transmission equipment |
| UNE-EN 50518-2:2014 | Monitoring and alarm receiving centre - Part 2: Technical requirements |
| I.S. EN 15713:2009 | SECURE DESTRUCTION OF CONFIDENTIAL MATERIAL - CODE OF PRACTICE |
| S.R. CLC/TS 50131-2-9:2016 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-9: INTRUSION DETECTORS - ACTIVE INFRARED BEAM DETECTORS |
| I.S. EN 50131-3:2009 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 3: CONTROL AND INDICATING EQUIPMENT |
| UNI EN 15713 : 2009 | SECURE DESTRUCTION OF CONFIDENTIAL MATERIAL - CODE OF PRACTICE |
| S.R. CLC/TS 50131-2-11:2017 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-11: INTRUSION DETECTORS - ALDDR |
| CLC/TR 50531:2009 | Alarm systems - Terms and definitions |
| BS EN 50131-4:2009 | Alarm systems. Intrusion and hold-up systems Warning devices |
| PREN 50131-7 : DRAFT 1998 | ALARM SYSTEMS - INTRUSION SYSTEMS - PART 7: APPLICATION GUIDELINES |
| S.R. CLC/TS 50131-2-10:2014 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-10: INTRUSION DETECTORS - LOCK STATE CONTACTS (MAGNETIC) |
| EN 15713:2009 | Secure destruction of confidential material - Code of practice |
| EN 50136-2-1 : 98 AMD 1 2001 | ALARM SYSTEMS - ALARM TRANSMISSION SYSTEMS AND EQUIPMENT - PART 2-1: GENERAL REQUIREMENTS FOR ALARM TRANSMISSION EQUIPMENT |
| S.R. CLC/TS 50131-12:2016 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 12: METHODS AND REQUIREMENTS FOR SETTING AND UNSETTING OF INTRUDER ALARM SYSTEMS (IAS) |
| BS EN 50131-2-3:2008 | Alarm systems. Intrusion and hold-up systems Requirements for microwave detectors |
| CEI CLC/TS 50131-2-9 : 1ED 2017 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-9: INTRUSION DETECTORS - ACTIVE INFRARED BEAM DETECTORS |
| 07/30134620 DC : 0 | BS EN 50131-6 - ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 6: POWER SUPPLIES |
| CLC/TS 50131-9:2014 | Alarm systems - Intrusion and hold-up systems - Part 9: Alarm verification - Methods and principles |
| BS EN 50518-2:2013 | Monitoring and alarm receiving centre Technical requirements |
| S.R. CLC/TS 50131-2-7-2:2009 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-2: INTRUSION DETECTORS - GLASS BREAK DETECTORS (PASSIVE) |
| DD CLC/TS 50131-4:2006 | Alarm systems. Intrusion and hold-up systems Warning devices |
| 09/30210479 DC : 0 | BS EN 50136-1 - ALARM SYSTEMS - ALARM TRANSMISSION SYSTEMS - PART 1: GENERAL REQUIREMENTS FOR ALARM TRANSMISSION SYSTEMS |
| CEN/TR 14383-8:2009 | Prevention of crime - Urban planning and building design - Part 8: Protection of buildings and sites against criminal attacks with vehicles |
| CEI EN 50131-2-7-2 : 2013 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-2: INTRUSION DETECTORS - GLASS BREAK DETECTORS (PASSIVE) |
| PD CLC/TS 50131-9:2014 | Alarm systems. Intrusion and hold-up systems Alarm verification. Methods and principles |
| 99/715383 DC : DRAFT OCT 1999 | BS EN 50131-4 - ALARM SYSTEMS - INTRUSION SYSTEMS - PART 4: WARNING DEVICES |
| DD CLC/TS 50131-2-7-1:2009 | Alarm systems. Intrusion and hold-up systems Intrusion detectors. Glass break detectors (acoustic) |
| CLC/TS 50131-2-11:2017 | Alarm systems - Intrusion and hold-up systems - Part 2-11: Intrusion detectors - ALDDR |
| DD CLC/TS 50131-2-2:2004 | Alarm systems. Intrusion systems Requirements for passive infrared detectors |
| CEI CLC/TS 50131-2-8 : 2013 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-8: INTRUSION DETECTORS - SHOCK DETECTORS |
| PD CLC/TS 50131-2-8:2012 | Alarm systems. Intrusion and hold-up systems Intrusion detectors. Shock detectors |
| 11/30245742 DC : 0 | BS EN 50131-10 - ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 10: APPLICATION SPECIFIC REQUIREMENTS FOR SUPERVISED PREMISES TRANSCEIVER (SPT) |
| CLC/TS 50131-2-7-2:2009 | Alarm systems - Intrusion and hold-up systems - Part 2-7-2: Intrusion detectors - Glass break detectors (passive) |
| UNE-EN 50131-2-7-1:2013 | Alarm systems - Intrusion and hold-up systems - Part 2-7-1: Intrusion detectors - Glass break detectors (acoustic) |
| CLC/TS 50131-2-8:2012 | Alarm systems - Intrusion and hold-up systems - Part 2-8: Intrusion detectors - Shock detectors |
| UNE-EN 50131-2-8:2017 | Alarm systems - Intrusion and hold-up systems - Part 2-8: Intrusion detectors - Shock detectors |
| S.R. CLC/TR 50531:2009 | ALARM SYSTEMS - TERMS AND DEFINITIONS |
| UNI CEI EN 50518-2 : 2014 | MONITORING AND ALARM RECEIVING CENTRE - PART 2: TECHNICAL REQUIREMENTS |
| I.S. CLC TS 50131-4:2006 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 4: WARNING DEVICES |
| I.S. EN 50131-2-7-3:2012/A2:2016 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-3: INTRUSION DETECTORS - GLASS BREAK DETECTORS (ACTIVE) |
| PREN 50131-5-3 : DRAFT 2015 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 5-3: REQUIREMENTS FOR INTERCONNECTIONS EQUIPMENT USING RADIO FREQUENCY TECHNIQUES |
| PREN 50131-8 : DRAFT 2017 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 8: SECURITY FOG DEVICES |
| CLC/TS 50131-7:2010 | Alarm systems - Intrusion and hold-up systems - Part 7: Application guidelines |
| I.S. CEN TS 14383-4:2006 | PREVENTION OF CRIME - URBAN PLANNING AND DESIGN - PART 4: SHOPS AND OFFICES |
| UNE-EN 50131-2-7-2:2013 | Alarm systems - Intrusion and hold-up systems - Part 2-7-2: Intrusion detectors - Glass break detectors (passive) |
| UNE-EN 50131-5-3:2017 | Alarm systems - Intrusion systems - Part 5-3: Requirements for interconnections equipment using radio frequency techniques |
| UNE-EN 50131-2-7-3:2013 | Alarm systems - Intrusion and hold-up systems - Part 2-7-3: Intrusion detectors - Glass break detectors (active) |
| CLC/TS 50131-2-10:2014 | Alarm systems - Intrusion and hold-up systems - Part 2-10: Intrusion detectors - Lock state contacts (magnetic) |
| UNE-EN 50136-1:2012 | Alarm systems - Alarm transmission systems and equipment - Part 1: General requirements for alarm transmission systems |
| PREN 50131-2-2 : DRAFT 2016 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-2: INTRUSION DETECTORS - PASSIVE INFRARED DETECTORS |
| PREN 50131-10 : DRAFT 2011 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 10: APPLICATION SPECIFIC REQUIREMENTS FOR SUPERVISED PREMISES TRANSCEIVER (SPT) |
| DD CLC/TS 50131-2-6:2004 | Alarm systems. Intrusion systems Requirements for opening contacts (magnetic) |
| I.S. EN 50131-2-3:2008 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-3: REQUIREMENTS FOR MICROWAVE DETECTORS |
| CEI EN 50131-2-7-3 : 2013 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-3: INTRUSION DETECTORS - GLASS BREAK DETECTORS (ACTIVE) |
| CEI EN 50131-3 : 2009 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 3: CONTROL AND INDICATING EQUIPMENT |
| NF EN 50136-2-1 : 98 AMD 1 2002 | ALARM SYSTEMS - ALARM TRANSMISSION SYSTEMS AND EQUIPMENT - PART 2-1: GENERAL REQUIREMENTS FOR EQUIPMENT USED IN SYSTEMS USING DEDICATED ALARM PATHS |
| CEI CLC/TS 50131-11 : 2013 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 11: HOLD-UP DEVICES |
| 11/30247653 DC : 0 | BS EN 50131-6:2008/PRAA - ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 6: POWER SUPPLIES |
| I.S. EN 50131-10:2014 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 10: APPLICATION SPECIFIC REQUIREMENTS FOR SUPERVISED PREMISES TRANSCEIVER (SPT) |
| CEI EN 50131-2-2 : 2008 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-2: INTRUSION DETECTORS - PASSIVE INFRARED DETECTORS |
| DD CLC/TS 50131-3:2003 | Alarm systems. Intrusion systems Control and indicating equipment |
| BS EN 50131-2-7-1 : 2012 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-1: INTRUSION DETECTORS - GLASS BREAK DETECTORS (PASSIVE) |
| S.R. CLC/TS 50131-5-4:2012 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 5-4: SYSTEM COMPATIBILITY TESTING FOR I&HAS EQUIPMENTS LOCATED IN SUPERVISED PREMISES |
| CEI EN 50131-2-5 : 2009 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-5: REQUIREMENTS FOR COMBINED PASSIVE INFRARED AND ULTRASONIC DETECTORS |
| CEI EN 50131-2-8 : 1ED 2017 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-8: INTRUSION DETECTORS - SHOCK DETECTORS |
| 07/30162638 DC : 0 | BS 50131-2-3 - ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-3: REQUIREMENTS FOR MICROWAVE DETECTORS |
| 16/30299842 DC : 0 | BS EN 50518 - MONITORING AND ALARM RECEIVING CENTRE |
| PD CLC/TS 50131-2-11:2017 | PD CLC/TS 50131-2-11 Alarm systems - Intrusion and hold-up systems Part 2-11: Intrusion detectors - ALDDR |
| UNE-CLC/TS 50131-5-4:2013 | Alarm systems - Intrusion and hold-up systems - Part 5-4: System compatibility testing for I&HAS equipments located in supervised premises |
| CEI EN 50131-8 : 2010 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 8: SECURITY FOG DEVICE/SYSTEMS |
| BS EN 50136-1 : 2012 | ALARM SYSTEMS - ALARM TRANSMISSION SYSTEMS AND EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR ALARM TRANSMISSION SYSTEMS |
| 07/30162640 DC : 0 | BS EN 50131-2-4 - ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-4: REQUIREMENTS FOR COMBINED PASSIVE INFRA-RED AND MICROWAVE DETECTORS |
| UNE-EN 50131-4:2010 | Alarm systems - Intrusion and hold-up systems - Part 4: Warning devices |
| 07/30162643 DC : DRAFT AUG 2007 | BS EN 50131-2-5 - ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-5: REQUIREMENTS FOR COMBINED PASSIVE INFRARED AND ULTRASONIC DETECTORS |
| CLC/TS 50131-2-4:2004 | Alarm systems - Intrusion systems - Part 2-4: Requirements for combined passive infrared and microwave detectors |
| PREN 50131-4 : DRAFT 2017 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 4: WARNING DEVICES |
| OVE/ONORM EN 50131-2-2 : 2008 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-2: INTRUSION DETECTORS - PASSIVE INFRARED DETECTORS |
| UNE-CEN/TS 14383-3:2011 EX | Prevention of crime - Urban planning and building design - Part 3: Dwellings |
| S.R. CLC/TS 50131-11:2012 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 11: HOLD-UP DEVICES |
| CEI CLC/TS 50131-12 : 1ED 2017 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 12: METHODS AND REQUIREMENTS FOR SETTING AND UNSETTING OF INTRUDER ALARM SYSTEMS (IAS) |
| I.S. EN 16893:2018 | CONSERVATION OF CULTURAL HERITAGE - SPECIFICATIONS FOR LOCATION, CONSTRUCTION AND MODIFICATION OF BUILDINGS OR ROOMS INTENDED FOR THE STORAGE OR USE OF HERITAGE COLLECTIONS |
| I.S. EN 50518-1:2013 | MONITORING AND ALARM RECEIVING CENTRE - PART 1: LOCATION AND CONSTRUCTION REQUIREMENTS |
| CLC/TS 50131-2-2:2004 | Alarm systems - Intrusion systems - Part 2-2: Requirements for passive infrared detectors |
| CLC/TS 50131-2-7-3:2009 | Alarm systems - Intrusion and hold-up systems - Part 2-7-3: Intrusion detectors - Glass break detectors (active) |
| S.R. CLC/TS 50131-2-8:2012 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-8: INTRUSION DETECTORS - SHOCK DETECTORS |
| EN 16893:2018 | Conservation of Cultural Heritage - Specifications for location, construction and modification of buildings or rooms intended for the storage or use of heritage collections |
| UNI CEN/TS 14383-4 : 2006 | PREVENTION OF CRIME - URBAN PLANNING AND DESIGN - PART 4: SHOPS AND OFFICES |
| I.S. EN 50131-6:2017 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 6: POWER SUPPLIES |
| I.S. EN 50131-5-3:2017 | ALARM SYSTEMS - INTRUSION SYSTEMS - PART 5-3: REQUIREMENTS FOR INTERCONNECTIONS EQUIPMENT USING RADIO FREQUENCY TECHNIQUES |
| EN 50131-3:2009 | Alarm systems - Intrusion and hold-up systems - Part 3: Control and indicating equipment |
| CLC/TS 50131-11:2012 | Alarm systems - Intrusion and hold-up systems - Part 11: Hold-up devices |
| EN 50131-5-3:2017 | Alarm systems - Intrusion systems - Part 5-3: Requirements for interconnections equipment using radio frequency techniques |
| EN 50131-2-7-3:2012/A2:2016 | Alarm systems - Intrusion and hold-up systems - Part 2-7-3: Intrusion detectors - Glass break detectors (active) |
| CEN/TS 14383-3:2005 | Prevention of crime - Urban planning and building design - Part 3: Dwellings |
| EN 50131-2-6:2008 | Alarm systems - Intrusion and hold-up systems - Part 2-6: Opening contacts (magnetic) |
| EN 50131-2-7-2 : 2012 AMD 2 2016 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-2: INTRUSION DETECTORS - GLASS BREAK DETECTORS (PASSIVE) |
| EN 50131-2-3:2008 | Alarm systems - Intrusion and hold-up systems - Part 2-3: Requirements for microwave detectors |
| EN 50131-2-5:2008 | Alarm systems - Intrusion and hold-up systems - Part 2-5: Requirements for combined passive infrared and ultrasonic detectors |
| EN 50131-2-7-1:2012/A2:2016 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-1: INTRUSION DETECTORS - GLASS BREAK DETECTORS (ACOUSTIC) |
| CLC/TS 50131-4:2006 | Alarm systems - Intrusion and hold-up systems - Part 4: Warning devices |
| CLC/TS 50131-5-4:2012 | Alarm systems - Intrusion and hold-up systems - Part 5-4: System compatibility testing for I&HAS equipments located in supervised premises |
| EN 50131-4:2009 | Alarm systems - Intrusion and hold-up systems - Part 4: Warning devices |
| IEC 60950-1:2005+AMD1:2009+AMD2:2013 CSV | Information technology equipment - Safety - Part 1: General requirements |
| EN 62368-1:2014/AC:2017-03 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS (IEC 62368-1:2014, MODIFIED) |
| CLC/TS 50131-7:2010 | Alarm systems - Intrusion and hold-up systems - Part 7: Application guidelines |
| EN 50136-1:2012 | Alarm systems - Alarm transmission systems and equipment - Part 1: General requirements for alarm transmission systems |
| EN 61000-6-3:2007/A1:2011/AC:2012 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-3: GENERIC STANDARDS - EMISSION STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS (IEC 61000-6-3:2006/A1:2010) |
| EN 60065:2014/AC:2017-01 | AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS (IEC 60065:2014/COR2:2016) |
| IEC 60073:2002 | Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators |
| EN 60073:2002 | Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators |
| EN 60950-1:2006/A2:2013 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60950-1:2005/A2:2013, MODIFIED) |
| EN 50131-3:2009 | Alarm systems - Intrusion and hold-up systems - Part 3: Control and indicating equipment |
| IEC 61000-6-3:2006+AMD1:2010 CSV | Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments |
| EN 50131-6:2017 | Alarm systems - Intrusion and hold-up systems - Part 6: Power supplies |
| EN 50130-4:2011/A1:2014 | ALARM SYSTEMS - PART 4: ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD: IMMUNITY REQUIREMENTS FOR COMPONENTS OF FIRE, INTRUDER, HOLD UP, CCTV, ACCESS CONTROL AND SOCIAL ALARM SYSTEMS |
| EN 50130-5:2011 | Alarm systems - Part 5: Environmental test methods |
| IEC 62368-1:2014 | Audio/video, information and communication technology equipment - Part 1: Safety requirements |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Are you sure?
Logging out.