EN 4691-1:2017
Current
Current
The latest, up-to-date edition.
Aerospace series - Tie rod with integrated bolts - Part 1: Technical specification
Published date
11-10-2017
Publisher
Sorry this product is not available in your region.
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations
5 Required characteristics, inspections and
test methods
6 Allowable static loads
7 Allowable dynamic loads
8 Assembly load locking clip EN 4692
9 Adjustment-torque
10 Technical requirements
11 Qualification
12 Condition on delivery
13 Material
Annex A (normative) - Sampling
Annex B (informative) - Standard evolution form
This standard specifies the required characteristics, inspection and test methods, qualification and acceptance conditions for rod assemblies with two adjustable ends with integrated bolts, designed to withstand static and dynamic loads possible for interior and substructure in the temperature range from − 55 °C to 85 °C. It is applicable whenever referenced.For a complete overview see EN 4691-2.
| Committee |
ASD-STAN
|
| DevelopmentNote |
Supersedes PREN 4691-1. (11/2017)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| DIN EN 4691-1:2016-06 (Draft) | Identical |
| ONORM EN 4691-1 : 2018 | Identical |
| DIN EN 4691-1:2018-04 | Identical |
| NF EN 4691-1 : 2017 | Identical |
| BS EN 4691-1:2017 | Identical |
| SN EN 4691-1 : 2018 | Identical |
| PN EN 4691-1 : 2018 | Identical |
| UNI EN 4691-1 : 2017 | Identical |
| UNE-EN 4691-1:2017 | Identical |
| I.S. EN 4691-1:2017 | Identical |
| NS EN 4691-1 : 2017 | Identical |
| NEN EN 4691-1 : 2017 | Identical |
| I.S. EN 4693:2017 | AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - ASSEMBLY CODE A, B AND C |
| BS EN 4693:2017 | Aerospace series. Tie rod with integrated bolts. Assembly code A, B and C |
| I.S. EN 4692:2017 | AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - LOCKING CLIP |
| I.S. EN 4694:2017 | AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - ASSEMBLY CODE D, E AND F |
| EN 4693:2017 | Aerospace series - Tie rod with integrated bolts - Assembly code A, B and C |
| EN 9100:2009 | Quality Management Systems - Requirements for Aviation, Space and Defense Organizations |
| ISO 5855-2:1999 | Aerospace MJ threads Part 2: Limit dimensions for bolts and nuts |
| DIN 53504:2015-08 (Draft) | TESTING OF RUBBER - DETERMINATION OF TENSILE STRENGTH AT BREAK, TENSILE STRESS AT YIELD, ELONGATION AT BREAK AND STRESS VALUES IN A TENSILE TEST |
| ISO 5855-1:1999 | Aerospace MJ threads Part 1: General requirements |
| EN 2825:2011 | Aerospace series - Burning behaviour of non metallic materials under the influence of radiating heat and flames - Determination of smoke density |
| EN ISO 527-2:2012 | Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012) |
| ISO 10964:1993 | Adhesives — Determination of torque strength of anaerobic adhesives on threaded fasteners |
| ISO 1172:1996 | Textile-glass-reinforced plastics — Prepregs, moulding compounds and laminates — Determination of the textile-glass and mineral-filler content — Calcination methods |
| ISO 10123:2013 | Adhesives Determination of shear strength of anaerobic adhesives using pin-and-collar specimens |
| EN 4695:2017 | Aerospace series - Tie Rod with integrated bolts - Assembly Code G, H and K |
| EN ISO 9227:2017 | Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017) |
| ISO 34-1:2015 | Rubber, vulcanized or thermoplastic Determination of tear strength Part 1: Trouser, angle and crescent test pieces |
| EN ISO 179-1:2010 | Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010) |
| ISO 75-2:2013 | Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite |
| ISO 527-2:2012 | Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics |
| EN 4694:2017 | Aerospace series - Tie rod with integrated bolts - Assembly code D, E and F |
| EN ISO 75-2:2013 | Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:2013) |
| DIN 65271:2002-01 | AEROSPACE SERIES - ELASTOMERIC SEMI-FINISHED PRODUCTS AND PARTS - TECHNICAL SPECIFICATION |
| ASTM D 696 : 2016 : REDLINE | Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between −30°C and 30°C with a Vitreous Silica Dilatometer |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| ISO 175:2010 | Plastics Methods of test for the determination of the effects of immersion in liquid chemicals |
| ISO 1183-1:2012 | Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method |
| EN 2004-1:1993 | Aerospace series - Test methods for aluminium and aluminium alloy products - Part 1: Determination of electrical conductivity of wrought aluminium alloys |
| ISO 291:2008 | Plastics Standard atmospheres for conditioning and testing |
| EN 2424:2008 | Aerospace series - Marking of aerospace products |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| EN ISO 1172:1998 | Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content - Calcination methods (ISO 1172:1996) |
| EN 4692:2017 | Aerospace series - Tie Rod with integrated bolts -Locking clip |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 179-1:2010 | Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test |
| EN 2826:2011 | Aerospace series - Burning behaviour of non metallic materials under the influence of radiating heat and flames - Determination of gas components in the smoke |
| EN ISO 291:2008 | Plastics - Standard atmospheres for conditioning and testing (ISO 291:2008) |
| ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
| ISO 37:2017 | Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties |
| EN 571-1:1997 | Non destructive testing - Penetrant testing - Part 1: General principles |
| PREN 4691-2 : DRAFT 2015 | AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - PART 2: OVERVIEW CONSTRUCTION KIT |
| ISO 178:2010 | Plastics Determination of flexural properties |
| EN ISO 1183-1:2012 | Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012) |
| PREN 4693 : DRAFT 2015 | AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - ASSEMBLY CODE A, B AND C |
| EN ISO 175:2010 | Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:2010) |
| ISO 1817:2015 | Rubber, vulcanized or thermoplastic Determination of the effect of liquids |
| ISO 2781:2008 | Rubber, vulcanized or thermoplastic Determination of density |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.