• Shopping Cart
    There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 4611-002:2012

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 002: General

Superseded date

22-03-2022

Superseded by

EN 4611-002:2018

Published date

08-02-2012

Sorry this product is not available in your region.

Foreword
1 Scope
2 Normative references
3 Terms, definitions, symbols and abbreviations
4 List of product standards
5 Materials and construction
6 Identification and marking
7 Technical specification
Bibliography

This European Standard specifies the list of product standards and common characteristics of electrical cables for use in the on-board electrical systems of aircraft operating at temperatures between –65 °C to 135 °C, dependant upon conductor type, and 150 °C, operating at voltages not exceeding 600 V r.m.s and frequencies not exceeding 2 000 Hz. (unless otherwise specified in product standards).

Committee
ASD-STAN
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Superseded
SupersededBy

BS EN 4611-009:2012 Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family BJ. Nickel plated copper. Operating temperatures, between -65°C and 150°C. Single extruded wall for use as cable cores or within equipment in areas of high vibration, cable flexing and fluid contamination. UV laser printable. Product standard
16/30345025 DC : 0 BS EN 4611-003 - AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 003: TIN PLATED COPPER - OPERATING TEMPERATURE, BETWEEN -65 DEGREE C AND 135 DEGREE C - SINGLE EXTRUDED WALL FOR ENCLOSED APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD
PREN 4612-007 : 200P1 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - JACKETED OR SCREENED AND JACKETED - PART 007: SILVER PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - SINGLE EXTRUDED WALL FOR OPEN APPLICATIONS, WITH JACKET WITHOUT SCREEN - UV LASER PRINTABLE - PRODUCT STANDARD
PREN 4612-006 : 200P1 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - JACKETED OR SCREENED AND JACKETED - PART 006: TIN PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 135 DEGREES C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS, WITH JACKET AND SCREEN (BRAID) - UV LASER PRINTABLE - PRODUCT STANDARD
PREN 4611-003 : 200P2 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 003: TIN PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 135 DEGREES C - SINGLE EXTRUDED WALL FOR ENCLOSED APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD
PREN 4612-003 : 200P1 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - JACKETED OR SCREENED AND JACKETED - PART 003: TIN PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 135 DEGREES C - SINGLE EXTRUDED WALL FOR OPEN APPLICATIONS, WITH JACKET WITHOUT SCREEN - UV LASER PRINTABLE - PRODUCT STANDARD
I.S. EN 4611-003:2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 003: TIN PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 135 DEGREES C - SINGLE EXTRUDED WALL FOR ENCLOSED APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD
I.S. EN 4611-004:2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 004: TIN PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 135 DEGREES C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD
UNI EN 4611-006 : 2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 006: SILVER PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD
16/30345037 DC : 0 BS EN 4611-005 - AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 005: SILVER PLATED COPPER - OPERATING TEMPERATURE, BETWEEN -65 DEGREE C AND 150 DEGREE C - SINGLE EXTRUDED WALL FOR ENCLOSED APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD
NF EN 4612-003 : 2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - JACKETED OR SCREENED AND JACKETED - PART 003: TIN PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 135 DEGREES C - SINGLE EXTRUDED WALL FOR OPEN APPLICATIONS, WITH JACKET WITHOUT SCREEN - UV LASER PRINTABLE - PRODUCT STANDARD
17/30368772 DC : 0 PREN 4612-005 - AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY XLETFE - FAMILY JACKETED OR SCREENED AND JACKETED - PART 005: TIN PLATED COPPER - OPERATING TEMPERATURES, BETWEEN 65 DEGREES C AND 135 DEGREES C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS, WITH JACKET WITHOUT SCREEN UV LASER PRINTABLE - PRODUCT STANDARD
I.S. EN 4611-005:2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 005: SILVER PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - SINGLE EXTRUDED WALL FOR ENCLOSED APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD
16/30345033 DC : 0 BS EN 4611-004 - AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 004: TIN PLATED COPPER - OPERATING TEMPERATURE, BETWEEN -65 DEGREE C AND 135 DEGREE C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD
PREN 4611-007 : 200P2 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 007: NICKEL PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD
PREN 4611-006 : 200P2 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 006: SILVER PLATED COPPER - OPERATING TEMPERATURES BETWEEN -65 DEGREES C AND 150 DEGREES C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD
UNI EN 4612-005 : 2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - JACKETED OR SCREENED AND JACKETED - PART 005: TIN PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 135 DEGREES C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS, WITH JACKET WITHOUT SCREEN - UV LASER PRINTABLE - PRODUCT STANDARD
I.S. EN 4611-006:2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 006: SILVER PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD
UNI EN 4612-003 : 2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - JACKETED OR SCREENED AND JACKETED - PART 003: TIN PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 135 DEGREES C - SINGLE EXTRUDED WALL FOR OPEN APPLICATIONS, WITH JACKET WITHOUT SCREEN - UV LASER PRINTABLE - PRODUCT STANDARD
UNI EN 4611-003 : 2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 003: TIN PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 135 DEGREES C - SINGLE EXTRUDED WALL FOR ENCLOSED APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD
NF EN 4612-005 : 2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY XLETFE FAMILY JACKETED OR SCREENED AND JACKETED - PART 005: TIN PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 135 DEGREES C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS, WITH JACKET WITHOUT SCREEN - UV LASER PRINTABLE - PRODUCT STANDARD
17/30368771 DC : 0 PREN 4612-004 - AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - JACKETED OR SCREENED AND JACKETED - PART 004: TIN PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 135 DEGREES C - SINGLE EXTRUDED WALL FOR OPEN APPLICATIONS, WITH JACKET AND SCREEN (BRAID) - UV LASER PRINTABLE - PRODUCT STANDARD
I.S. EN 4611-009:2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 009: BJ - NICKEL PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - SINGLE EXTRUDED WALL FOR USE AS CABLE CORES OR WITHIN EQUIPMENT IN AREAS OF HIGH VIBRATION, CABLE FLEXING AND FLUID CONTAMINATION - UV LASER PRINTABLE - PRODUCT STANDARD
I.S. EN 4611-008:2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 008: BP - NICKEL PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS WITH ADDITIONAL PROTECTION IN AREAS OF HIGH VIBRATION, CABLE FLEXING AND FLUID CONTAMINATION - UV LASER PRINTABLE - PRODUCT STANDARD
I.S. EN 4611-007:2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 007: NICKEL PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD
UNI EN 4611-005 : 2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 005: SILVER PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES AND 150 DEGREES - SINGLE EXTRUDED WALL FOR ENCLOSED APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD
UNI EN 4611-007 : 2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 007: NICKEL PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD
EN 4611-003:2012 Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 003: Tin plated copper - Operating temperatures, between -65 °C and 135 °C - Single extruded wall for enclosed applications - UV laser printable - Product standard
EN 4611-004:2012 Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 004: Tin plated copper - Operating temperatures, between –65 °C and 135 °C - Dual extruded wall for open applications - UV laser printable - Product standard
EN 4611-009:2012 Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 009: BJ - Nickel plated copper - Operating temperatures, between –65 °C and 150 °C - Single extruded wall for use as cable cores or within equipment in areas of high vibration, cable flexing and fluid contamination - UV laser printable - Product standard
BS EN 4611-008:2012 Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family BP. Nickel plated copper. Operating temperatures, between -65°C and 150°C. Dual extruded wall for open applications with additional protection in areas of high vibration, cable flexing and fluid contamination. UV laser printable. Product standard
17/30368774 DC : 0 PREN 4612-007 - AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY XLETFE FAMILY JACKETED OR SCREENED AND JACKETED - PART 007: SILVER PLATED COPPER OPERATING TEMPERATURES, BETWEEN 65 DEGREES C AND 150 DEGREES C SINGLE EXTRUDED WALL FOR OPEN APPLICATIONS, WITH JACKET WITHOUT SCREEN UV LASER PRINTABLE - PRODUCT STANDARD
BS EN 4611-003:2012 Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family Tin plated copper. Operating temperatures, between -65 °C and 135 °C. Single extruded wall for enclosed applications. UV laser printable. Product standard
UNI EN 4611-009 : 2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 009: BJ - NICKEL PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - SINGLE EXTRUDED WALL FOR USE AS CABLE CORES OR WITHIN EQUIPMENT IN AREAS OF HIGH VIBRATION, CABLE FLEXING AND FLUID CONTAMINATION - UV LASER PRINTABLE - PRODUCT STANDARD
17/30369179 DC : 0 BS EN 4612-009 - AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY JACKETED OR SCREENED AND JACKETED - PART 009: SILVER PLATED COPPER DUAL EXTRUDED WALL FOR OPEN APPLICATIONS, WITH JACKET WITHOUT SCREEN UV LASER PRINTABLE - PRODUCT STANDARD
BS EN 4611-006:2012 Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family Silver plated copper. Operating temperatures, between -65°C and 150°C. Dual extruded wall for open applications. UV laser printable. Product standard
17/30368769 DC : 0 PREN 4612-003 - AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - JACKETED OR SCREENED AND JACKETED - PART 003: TIN PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 135 DEGREES C - SINGLE EXTRUDED WALL FOR OPEN APPLICATIONS, WITH JACKET WITHOUT SCREEN - UV LASER PRINTABLE - PRODUCT STANDARD
UNI EN 4612-008 : 2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY XLETFE FAMILY JACKETED OR SCREENED AND JACKETED - PART 008: SILVER PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - SINGLE EXTRUDED WALL FOR OPEN APPLICATIONS, WITH JACKET AND SCREEN (BRAID) - UV LASER PRINTABLE - PRODUCT STANDARD
17/30369178 DC : 0 BS EN 4612-008 - AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY JACKETED OR SCREENED AND JACKETED - PART 008: SILVER PLATED COPPER OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C SINGLE EXTRUDED WALL FOR OPEN APPLICATIONS, WITH JACKET AND SCREEN (BRAID) UV LASER PRINTABLE - PRODUCT STANDARD
UNI EN 4612-007 : 2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY XLETFE FAMILY JACKETED OR SCREENED AND JACKETED - PART 007: SILVER PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - SINGLE EXTRUDED WALL FOR OPEN APPLICATIONS, WITH JACKET WITHOUT SCREEN - UV LASER PRINTABLE - PRODUCT STANDARD
EN 4611-008:2012 Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 008: BP - Nickel plated copper - Operating temperatures, between –65 °C and 150 °C - Dual extruded wall for open applications with additional protection in areas of high vibration, cable flexing and fluid contamination - UV laser printable - Product standard
NF EN 4612-008 : 2012 AEROSPACE SERIES - CABLES ELECTRICAL FOR GENERAL PURPOSE SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - JACKETED OR SCREENED AND JACKETED - PART 008: SILVER PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - SINGLE EXTRUDED WALL FOR OPEN APPLICATIONS, WITH JACKET AND SCREEN (BRAID) - UV LASER PRINTABLE - PRODUCT STANDARD
BS EN 4611-007:2012 Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family Nickel plated copper. Operating temperatures, between -65°C and 150°C. Dual extruded wall for open applications. UV laser printable. Product standard
16/30345045 DC : 0 BS EN 4611-007 - AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY XLETFE FAMILY - PART 007: NICKEL PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD
EN 4611-005:2012 Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 005: Silver plated copper — Operating temperatures, between –65 °C and 150 °C - Single extruded wall for enclosed applications - UV laser printable - Product standard
UNI EN 4611-004 : 2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 004: TIN PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 135 DEGREES C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD
BS EN 4611-004:2012 Aerospace series. Cables, electrical, for general purpose,single and multicore assembly. XLETFE Family Tin plated copper. Operating temperatures, between -65 °C and 135 °C. Dual extruded wall for open applications. UV laser printable. Product standard
NF EN 4612-004 : 2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY XLETFE FAMILY JACKETED OR SCREENED AND JACKETED - PART 004: TIN PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 135 DEGREES C SINGLE EXTRUDED WALL FOR OPEN APPLICATIONS, WITH JACKET AND SCREEN (BRAID) - UV LASER PRINTABLE - PRODUCT STANDARD
PREN 4612-004 : 200P1 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - JACKETED OR SCREENED AND JACKETED - PART 004: TIN PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 135 DEGREES C - SINGLE EXTRUDED WALL FOR OPEN APPLICATIONS, WITH JACKET AND SCREEN (BRAID) - UV LASER PRINTABLE - PRODUCT STANDARD
NF EN 4612-007 : 2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY XLETFE FAMILY JACKETED OR SCREENED AND JACKETED - PART 007: SILVER PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - SINGLE EXTRUDED WALL FOR OPEN APPLICATIONS, WITH JACKET WITHOUT SCREEN - UV LASER PRINTABLE - PRODUCT STANDARD
UNI EN 4611-008 : 2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 008: BP - NICKEL PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS WITH ADDITIONAL PROTECTION IN AREAS OF HIGH VIBRATION, CABLE FLEXING AND FLUID CONTAMINATION - UV LASER PRINTABLE - PRODUCT STANDARD
PREN 4612-008 : 200P1 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY JACKETED OR SCREENED AND JACKETED - PART 008: SILVER PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - SINGLE EXTRUDED WALL FOR OPEN APPLICATIONS, WITH JACKET AND SCREEN (BRAID) - UV LASER PRINTABLE - PRODUCT STANDARD
PREN 4611-004 : 200P2 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 004: TIN PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 135 DEGREES C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD
PREN 4612-005 : 200P1 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - JACKETED OR SCREENED AND JACKETED - PART 005: TIN PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 135 DEGREES C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS, WITH JACKET WITHOUT SCREEN - UV LASER PRINTABLE - PRODUCT STANDARD
PREN 4611-005 : 200P2 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 005: SILVER PLATED COPPER - OPERATING TEMPERATURES BETWEEN -65 DEGREES C AND 150 DEGREES C - SINGLE EXTRUDED WALL FOR ENCLOSED APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD
EN 4611-007:2012 Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 007: Nickel plated copper - Operating temperatures, between –65 °C and 150 °C - Dual extruded wall for open applications - UV laser printable - Product standard
EN 4611-006:2012 Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 006: Silver plated copper - Operating temperatures, between –65 °C and 150 °C - Dual extruded wall for open applications - UV laser printable - Product standard
BS EN 4611-005:2012 Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family Silver plated copper. Operating temperatures, between -65 °C and 150 °C. Single extruded wall for enclosed applications. UV laser printable. Product standard

EN 3838:2010 Aerospace series - Requirements and tests on user-applied markings on aircraft electrical cables
TR 6058 : 2011 AEROSPACE SERIES - CABLE CODE IDENTIFICATION LIST
ISO 2635:2003 Aircraft Conductors for general purpose aircraft electrical cables and aerospace applications Dimensions and characteristics
EN 4434:2005 Aerospace series - Copper or copper alloy lightweight conductors for electrical cables - Product standard (Normal and tight tolerances)
EN 3475-100:2010 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 100: General
EN 2084:2015 Aerospace series - Cables, electrical, general purpose, with conductors in copper or copper alloy - Technical specification

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.