EN 1977:2013
Current
The latest, up-to-date edition.
Copper and copper alloys - Copper drawing stock (wire rod)
16-01-2013
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Designations
5 Ordering information
6 Requirements
7 Sampling
8 Test methods
9 Declaration of conformity and inspection
documentation
10 Marking
Annex A (informative) - Information on electrical
resistivity and conductivity relationships
Annex B (normative) - Rapid Elongation Test method
(AR-Test) for diameter 8 mm Cu-ETP1 wire
rod
Bibliography
This European Standard specifies the composition, mechanical, electrical and physical properties for high conductivity copper drawing stock (wire rod) suitable for fabrication into wire by cold drawing, principally for the manufacture of electrical conductors. This European Standard covers drawing stock (wire rod), in nine grades of copper and nine silver-bearing copper grades. Normally, the cross-section is approximately circular, in a range of diameters from 6 mm.
| Committee |
CEN/TC 133
|
| DevelopmentNote |
Supersedes PREN 1977. (02/2013)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NS EN 1977 : 2013 | Identical |
| UNE-EN 1977:2013 | Identical |
| NEN EN 1977 : 2013 | Identical |
| PN EN 1977 : 2013 | Identical |
| SN EN 1977 : 2013 | Identical |
| NBN EN 1977 : 2013 | Identical |
| I.S. EN 1977:2013 | Identical |
| NF EN 1977 : 2013 | Identical |
| UNI EN 1977 : 2013 | Identical |
| BS EN 1977:2013 | Identical |
| DIN EN 1977:2013-04 | Identical |
| CEI EN 50149 : 2013 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION - COPPER AND COPPER ALLOY GROOVED CONTACT WIRES |
| DD CEN/TS 13388:2008 | Copper and copper alloys. Compendium of compositions and products |
| DIN SPEC 9700 E : 2013 | COPPER AND COPPER ALLOYS - COMPENDIUM OF COMPOSITIONS AND PRODUCTS |
| PD CEN/TS 13388:2015 | Copper and copper alloys. Compendium of compositions and products |
| EN 12893:2000 | Copper and copper alloys - Determination of spiral elongation number |
| EN 50149:2012 | Railway applications - Fixed installations - Electric traction - Copper and copper alloy grooved contact wires |
| DIN CEN/TS 13388;DIN SPEC 9700:2013-05 | COPPER AND COPPER ALLOYS - COMPENDIUM OF COMPOSITIONS AND PRODUCTS |
| S.R. CEN/TS 13388:2015 | COPPER AND COPPER ALLOYS - COMPENDIUM OF COMPOSITIONS AND PRODUCTS |
| IEC 62917:2016 | Railway applications - Fixed installations - Electric traction - Copper and copper alloy grooved contact wires |
| I.S. EN 50149:2012 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION - COPPER AND COPPER ALLOY GROOVED CONTACT WIRES |
| BS EN 12893:2000 | Copper and copper alloys. Determination of spiral elongation number |
| VDI 2102 Blatt 2:2013-04 | Emission control - Copper and copper alloy melting plants |
| UNE-EN 50149:2012 | Railway applications - Fixed installations - Electric traction - Copper and copper alloy grooved contact wires |
| BS EN 50149:2012 | Railway applications. Fixed installations. Electric traction. Copper and copper alloy grooved contact wires |
| PD 6641:1999 | Copper and copper alloys. Compendium of compositions and products |
| 09/30209001 DC : 0 | BS EN 50149 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION - COPPER AND COPPER ALLOY GROOVED CONTACT WIRES |
| PREN 50149 : DRAFT 2009 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION - COPPER AND COPPER ALLOY GROOVED CONTACT WIRES |
| EN 12861:2018 | Copper and copper alloys - Scrap |
| I.S. CEN TS 13388:2004 | COPPER AND COPPER ALLOYS - COMPENDIUM OF COMPOSITIONS AND PRODUCTS |
| I.S. EN 12861:1999 | COPPER AND COPPER ALLOYS - SCRAP |
| UNE-CEN/TS 13388:2010 EX | Copper and copper alloys - Compendium of compositions and products |
| CEN/TS 13388:2015 | Copper and copper alloys - Compendium of compositions and products |
| EN 1655:1997 | Copper and copper alloys - Declarations of conformity |
| IEC 60028:1925 | International standard of resistance for copper |
| EN 1412:2016 | Copper and copper alloys - European numbering system |
| ISO 1190-1:1982 | Copper and copper alloys — Code of designation — Part 1: Designation of materials |
| EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| IEC 60468:1974 | Method of measurement of resistivity of metallic materials |
| EN ISO 2626:1995 | Copper - Hydrogen embrittlement test (ISO 2626:1973) |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| ISO 4746:1977 | Oxygen-free copper Scale adhesion test |
| ISO 80000-1:2009 | Quantities and units — Part 1: General |
| ISO 2626:1973 | Copper — Hydrogen embrittlement test |
| EN 12893:2000 | Copper and copper alloys - Determination of spiral elongation number |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.