• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 1790:2013

Current

Current

The latest, up-to-date edition.

Road marking materials - Preformed road markings

Published date

02-10-2013

Sorry this product is not available in your region.

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Test methods
6 Evaluation of conformity
7 Marking and labelling
Annex A (normative) - Identification of preformed
        road marking materials
Annex B (normative) - Test method for Ash content
Annex C (normative) - Thermogravimetric analysis (TGA)
Annex D (normative) - FT-IR spectroscopy of the TGA
        residue
Annex E (normative) - Test method for ATR FT-IR
        spectroscopy of the adhesive layer
Annex F (normative) - Preformed self-adhesive road
        marking - Test method for determination
        of mass per unit area of the adhesive
Annex ZA (informative) - Clauses of this European Standard
         addressing the provisions of the EU Construction
         Products Directive
Bibliography

This European Standard specifies construction products which are white and yellow, removable or non-removable, preformed road marking materials, under the form of tape, cold plastic, thermoplastics with or without drop-on materials, to be used for permanent and/or temporary road markings in circulation areas. Other products and colours intended for road markings are not covered in this European Standard.This European Standard also gives specifications for the evaluation of conformity for white and yellow, removable or non-removable, preformed road materials under the form of tape, cold plastic, thermoplastics with or without drop-on materials to be used for permanent and/or temporary road markings in circulation areas including type testing and factory production control.This European Standard includes an Annex ZA for tapes, preformed cold plastic road marking and thermoplastic road marking with and without drop-on materials with the clauses addressing the provisions of the EU Construction Product Directive for permanent road marking.

Committee
CEN/TC 226
DevelopmentNote
Supersedes PREN 1790. (10/2013)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current
Supersedes

Standards Relationship
SN 640877-5 : 2014 Identical
NF EN 1790 : 2014 Identical
PN EN 1790 : 2014 Identical
NS EN 1790 : 2013 Identical
UNI EN 1790 : 2013 Identical
SN EN 1790:2014 Identical
UNE-EN 1790:2015 Identical
NBN EN 1790 : 2013 Identical
I.S. EN 1790:2013 Identical
NEN EN 1790 : 2013 Identical
BS EN 1790:2013 Identical
DIN EN 1790:2013-12 Identical

08/30184627 DC : DRAFT SEP 2008 BS EN 13459 - ROAD MARKING MATERIALS - SAMPLING FROM STORAGE AND TESTING
08/30184633 DC : DRAFT SEP 2008 BS EN 1871 - ROAD MARKING MATERIALS - LABORATORY METHODS FOR IDENTIFICATION
EN 12802:2011 Road marking materials - Laboratory methods for identification
EN 13459:2011 Road marking materials - Sampling from storage and testing
BS EN 13459:2011 Road marking materials. Sampling from storage and testing
DIN EN 13459:2011-12 ROAD MARKING MATERIALS - SAMPLING FROM STORAGE AND TESTING
DD ENV 13459-1:1999 Road marking. Materials. Quality control Sampling from storage and testing
08/30184630 DC : DRAFT SEP 2008 BS EN 12802 - ROAD MARKING MATERIALS - LABORATORY METHODS FOR IDENTIFICATION
I.S. ENV 13459-1:1999 ROAD MARKING MATERIALS - QUALITY CONTROL - PART 1: SAMPLING FROM STORAGE AND TESTING
DIN EN 12802:2011-12 Road marking materials - Laboratory methods for identification
DIN EN 13212:2011-12 Road marking materials - Requirements for factory production control
I.S. EN 12802:2011 ROAD MARKING MATERIALS - LABORATORY METHODS FOR IDENTIFICATION
I.S. EN 13212:2011 ROAD MARKING MATERIALS - REQUIREMENTS FOR FACTORY PRODUCTION CONTROL
DD ENV 13459-2:1999 Road marking. Materials. Quality control Guidelines for preparing quality plans for materials application
I.S. EN 13459:2011 ROAD MARKING MATERIALS - SAMPLING FROM STORAGE AND TESTING
I.S. ENV 13459-2:1999 ROAD MARKING MATERIALS - QUALITY CONTROL - PART 2: GUIDELINES FOR PREPARING QUALITY PLANS FOR MATERIALS APPLICATION
BS EN 13212:2011 Road marking materials. Requirements for factory production control
ENV 13459-2 : DRAFT 1999 ROAD MARKING MATERIALS - QUALITY CONTROL - GUIDELINES FOR PREPARING QUALITY PLANS FOR MATERIALS APPLICATION
UNI EN 13212 : 2011 ROAD MARKING MATERIALS - REQUIREMENTS FOR FACTORY PRODUCTION CONTROL
UNI EN 12802 : 2011 ROAD MARKING MATERIALS - LABORATORY METHODS FOR IDENTIFICATION
UNI EN 13459 : 2011 ROAD MARKING MATERIALS - SAMPLING FROM STORAGE AND TESTING
BS EN 12802:2011 Road marking materials. Laboratory methods for identification
UNE-EN 13212:2012 Road marking materials - Requirements for factory production control
UNE-EN 12802:2012 Road marking materials - Laboratory methods for identification
08/30184639 DC : DRAFT SEP 2008 BS EN 13212 - ROAD MARKING MATERIALS - REQUIREMENTS FOR FACTORY PRODUCTION CONTROL
UNE-EN 13459:2012 Road marking materials - Sampling from storage and testing
EN 13212:2011 Road marking materials - Requirements for factory production control
ENV 13459-1:1999 Road marking materials - Quality control - Part 1: Sampling from storage and testing

EN ISO 2286-2:2016 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate (ISO 2286-2:2016)
EN 12802:2011 Road marking materials - Laboratory methods for identification
EN 1824:2011 Road marking materials - Road trials
EN ISO 4892-3:2016 Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 4892-3:2016)
EN 13212:2011 Road marking materials - Requirements for factory production control
EN 13459:2011 Road marking materials - Sampling from storage and testing
ISO 2286-2:2016 Rubber- or plastics-coated fabrics Determination of roll characteristics Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
PREN 1871 : DRAFT 2012 ROAD MARKING MATERIALS - PAINT, THERMOPLASTIC AND COLD PLASTIC MATERIALS - SPECIFICATIONS
EN 13197:2011+A1:2014 Road marking materials - Wear simulator Turntable
EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
ISO 4892-3:2016 Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps
EN ISO 11358:1997 Plastics - Thermogravimetry (TG) of polymers - General principles (ISO 11358:1997)
ISO 11358:1997 Plastics Thermogravimetry (TG) of polymers General principles
ISO 5725-2:1994 Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
ISO 9001:2015 Quality management systems — Requirements
ISO 11664-2:2007 Colorimetry — Part 2: CIE standard illuminants

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.