EN 16900:2017
Current
The latest, up-to-date edition.
Fast pyrolysis bio-oils for industrial boilers - Requirements and test methods
15-03-2017
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Sampling and sample handling
5 Requirements and test methods
Annex A (informative) - Storage of fast pyrolysis
bio-oil
Annex B (normative) - Compatible materials
Annex C (normative) - Details of inter-laboratory
test programme
Annex D (normative) - Information on test method
procedures
Bibliography
This European Standard specifies requirements and test methods for fast pyrolysis bio-oils for boiler use at industrial scale (>1 MW thermal capacity), not for domestic use. Two different grades are specified.It is recommended to draw attention to differences especially in those properties, which can have an effect on the required flue gas treatment system, such as ash, nitrogen, and sulfur content. National and local regulations determine the requirements for flue gas treatment system.In addition to the quality requirements and test methods for fast pyrolysis bio-oils, further instructions on storage (Annex A), sampling, and materials compatibility (Annex B) are given.NOTEFor the purposes of this European Standard, the term "% (m/m)" is used to represent respectively the mass fraction.
| Committee |
CEN/TC 19
|
| DevelopmentNote |
Supersedes PREN 16900. (03/2017)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| UNI EN 16900 : 2017 | Identical |
| NF EN 16900:2018 | Identical |
| BS EN 16900:2017 | Identical |
| NS EN 16900 : 2017 | Identical |
| DIN EN 16900 E : 2017 | Identical |
| NEN EN 16900 : 2017 | Identical |
| PN-EN 16900:2017-04 | Identical |
| UNE-EN 16900:2017 | Identical |
| DIN EN 16900:2017-05 | Identical |
| I.S. EN 16900:2017 | Identical |
| DIN EN 16900:2015-09 (Draft) | Identical |
| SS-EN 16900:2017 | Identical |
| SN EN 16900:2017 | Identical |
| PD CEN/TR 17103:2017 | Petroleum and related products. Fast pyrolysis bio-oils for stationary internal combustion engines. Quality determination |
| S.R. CEN/TR 17103:2017 | FAST PYROLYSIS BIO-OILS FOR STATIONARY INTERNAL COMBUSTION ENGINES - QUALITY DETERMINATION |
| CEN/TR 17103:2017 | Petroleum and related products - Fast pyrolysis bio-oils for stationary internal combustion engines - Quality determination |
| ISO 3016:1994 | Petroleum products Determination of pour point |
| ISO 2719:2016 | Determination of flash point — Pensky-Martens closed cup method |
| EN ISO 17225-1:2014 | Solid biofuels - Fuel specifications and classes - Part 1: General requirements (ISO 17225-1:2014) |
| ISO 3170:2004 | Petroleum liquids — Manual sampling |
| EN ISO 3104:1996 | Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity (ISO 3104:1994) |
| ISO 9038:2013 | Determination of sustained combustibility of liquids |
| EN ISO 12185:1996 | Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method (ISO 12185:1996) |
| DIN 51900-1:2000-04 | Determining the gross calorific value of solid and liquid fuels using the bomb calorimeter, and calculation of net calorific value - Part 1: General information |
| ASTM E 70 | TEST METHOD FOR PH OF AQUEOUS SOLUTIONS WITH THE GLASS ELECTRODE |
| ISO 12185:1996 | Crude petroleum and petroleum products — Determination of density — Oscillating U-tube method |
| ISO 6245:2001 | Petroleum products — Determination of ash |
| EN 16476:2014 | Liquid petroleum products - Determination of Sodium, Potassium, Calcium, Phosphorus, Copper and Zinc contents in diesel fuel - Method via Inductively Coupled Plasma Optical Emission Spectrometry (ICP OES) |
| ISO 4259:2006 | Petroleum products Determination and application of precision data in relation to methods of test |
| DIN 51900-3:2005-01 | Testing of solid and liquid fuels - Determination of gross calorific value by the bomb calorimeter and calculation of net calorific value - Part 3: Method using adiabatic jacket |
| ASTM D 93 : 2016-07 | TEST METHODS FOR FLASH POINT BY PENSKY-MARTENS CLOSED CUP TESTER |
| EN ISO 6245:2002 | Petroleum products - Determination of ash (ISO 6245:2001) |
| ISO 17225-1:2014 | Solid biofuels Fuel specifications and classes Part 1: General requirements |
| EN ISO 2719:2016 | Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2016) |
| EN ISO 9038:2013 | Determination of sustained combustibility of liquids (ISO 9038:2013) |
| ISO 20846:2011 | Petroleum products Determination of sulfur content of automotive fuels Ultraviolet fluorescence method |
| ASTM E 203 : 2016 : REDLINE | Standard Test Method for Water Using Volumetric Karl Fischer Titration |
| ASTM D 5291 : 2016 : REDLINE | Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants |
| ASTM D 240 : 2017 : REDLINE | Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter |
| EN ISO 20846:2011 | Petroleum products - Determination of sulfur content of automotive fuels - Ultraviolet fluorescence method (ISO 20846:2011) |
| EN ISO 3170:2004 | Petroleum liquids - Manual sampling (ISO 3170:2004) |
| EN ISO 4259:2006 | Petroleum products - Determination and application of precision data in relation to methods of test (ISO 4259:2006) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.