EN 1679-1:1998+A1:2011
Current
Current
The latest, up-to-date edition.
Reciprocating internal combustion engines - Safety - Part 1: Compression ignition engines
Published date
12-01-2011
Publisher
Sorry this product is not available in your region.
Foreword
Introduction
1 Scope
2 Normative references
3 Definitions
4 General
5 List of hazards
6 Safety requirements and/or measures
7 Operating and maintenance instructions
8 Special requirements
9 Marking
Annex A (normative) - List of hazards
Annex B (informative) - Bibliography
Annex ZA (informative) - Relationship between this European
Standard and the Essential Requirements of EU
Directive 2006/42/EC
This standard specifies the safety requirements for compression ignition engines and their essential auxiliaries used in all applications on land, underground and water, except engines used to propel road vehicles and aircraft. The special requirements needed to cover operation in potentially explosive atmospheres are not covered in this standard.The engine in terms of this standard is understood as the prime mover up to its driving extremitie(s) for power take off(s).The hazards relevant to compression ignition engines are identified in annex A.This standard should be referred to in other standards wherever compression ignition engines are used.This European Standard is not applicable to compression ignition engines which are manufactured before the date of its publication as EN.
| Committee |
CEN/TC 270
|
| DevelopmentNote |
1998 Edition Re-Issued in January 2011 & incorporates AMD 1 2011. (01/2011)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| UNE-EN 1679-1:1998 | Identical |
| SN EN 1679-1 : 1998 + A1 2011 | Identical |
| PN EN 1679-1 : 2000 + A1 2011 | Identical |
| DIN EN 1679-1:2011-09 | Identical |
| NF EN 1679-1 : 1998 + A1 2011 | Identical |
| BS EN 1679-1 : 1998 | Identical |
| NBN EN 1679-1 : 1998 + A1 2011 | Identical |
| NS EN 1679-1 : 1998 + A1 2011 | Identical |
| SS-EN 1679-1+A1:2011 | Identical |
| UNI EN 1679-1 : 2011 | Identical |
| NEN EN 1679-1 : 1998 + A1 2011 | Identical |
| I.S. EN 1679-1:1998 | Identical |
| UNE-EN 1679-1:1998+A1:2011 | Identical |
| BS EN 1679-1:1998+A1:2011 | Identical |
| BS ISO 20474-1:2017 | Earth-moving machinery. Safety General requirements |
| 07/30158774 DC : 0 | BS EN 791 AMD1 - DRILL RIGS - SAFETY |
| 10/30211242 DC : 0 | BS EN 12601 - RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN GENERATING SETS - SAFETY |
| 10/30185766 DC : 0 | BS EN 1889-1 - MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES |
| BS EN 12111:2014 | Tunnelling machines. Road headers and continuous miners. Safety requirements |
| BS EN 1889-1:2011 | Machines for underground mines. Mobile machines working underground. Safety Rubber tyred vehicles |
| BS EN 12601:2010 | Reciprocating internal combustion engine driven generating sets. Safety |
| BS EN 1834-3:2000 | Reciprocating internal combustion engines. Safety requirements for design and construction of engines for use in potentially explosive atmospheres Group II engines for use in flammable dust atmospheres |
| DIN EN 12601:2011-07 | RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN GENERATING SETS - SAFETY |
| EN 12601:2010 | Reciprocating internal combustion engine driven generating sets - Safety |
| 01/105373 DC : DRAFT JUL 2001 | BS EN 474-1 EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| BS ISO 14885:2014 | Large yachts. Diesel engines for main propulsion and essential auxiliaries. Safety requirements |
| 12/30259316 DC : 0 | BS ISO 14885 - SHIPS AND MARINE TECHNOLOGY - LARGE YACHTS - AUXILIARY DIESEL ENGINES - SAFETY REQUIREMENTS |
| PREN 1889-1 : DRAFT 2010 | MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES |
| PREN 12601 : DRAFT 2010 | RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN GENERATING SETS - SAFETY |
| I.S. EN 12111:2014 | TUNNELLING MACHINES - ROAD HEADERS AND CONTINUOUS MINERS - SAFETY REQUIREMENTS |
| I.S. EN 1889-1:2011 | MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES |
| I.S. EN ISO 14314:2009 | RECIPROCAL INTERNAL COMBUSTION ENGINES - RECOIL STARTING EQUIPMENT - GENERAL SAFETY REQUIREMENTS |
| I.S. EN 1889-2:2003 | MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 2: RAIL LOCOMOTIVES |
| DIN EN ISO 14314:2010-01 | Reciprocal internal combustion engines - Recoil starting equipment - General safety requirements (ISO 14314:2004) |
| BS EN ISO 14314:2009 | Reciprocal internal combustion engines. Recoil starting equipment. General safety requirements |
| UNE-EN 1889-1:2012 | Machines for underground mines - Mobile machines working underground - Safety - Part 1: Rubber tyred vehicles |
| DIN EN 1889-1:2011-10 | MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES |
| UNI EN 1889-1 : 2011 | MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES |
| UNI EN 12601 : 2011 | RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN GENERATING SETS - SAFETY |
| UNI EN 1889-2 : 2009 | MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 2: RAIL LOCOMOTIVES |
| UNI EN 12111 : 2014 | TUNNELLING MACHINES - ROAD HEADERS AND CONTINUOUS MINERS - SAFETY REQUIREMENTS |
| UNI EN ISO 14314 : 2010 | RECIPROCAL INTERNAL COMBUSTION ENGINES - RECOIL STARTING EQUIPMENT - GENERAL SAFETY REQUIREMENTS |
| I.S. EN 12601:2010 | RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN GENERATING SETS - SAFETY |
| ISO 14885:2014 | Large yachts Diesel engines for main propulsion and essential auxiliaries Safety requirements |
| UNE-EN 12601:2011 | Reciprocating internal combustion engine driven generating sets - Safety |
| BS EN 1889-2 : 2003 | MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 2: RAIL LOCOMOTIVES |
| BS EN 1834-1:2000 | Reciprocating internal combustion engines. Safety requirements for design and construction of engines for use in potentially explosive atmospheres Group II engines for use in flammable gas and vapour atmospheres |
| ISO 14314:2004 | Reciprocal internal combustion engines Recoil starting equipment General safety requirements |
| UNE-EN ISO 14314:2010 | Reciprocal internal combustion engines - Recoil starting equipment - General safety requirements (ISO 14314:2004) |
| BS EN 1834-2:2000 | Reciprocating internal combustion engines. Safety requirements for design and construction of engines for use in potentially explosive atmospheres Group I engines for use in underground workings susceptible to firedamp and/or combustible dust |
| EN 1834-1:2000 | Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 1: Group II engines for use in flammable gas and vapour atmospheres |
| EN 1889-1:2011 | Machines for underground mines - Mobile machines working underground - Safety - Part 1: Rubber tyred vehicles |
| EN ISO 14314:2009 | Reciprocal internal combustion engines - Recoil starting equipment - General safety requirements (ISO 14314:2004) |
| EN 1834-3:2000 | Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 3: Group II engines for use in flammable dust atmospheres |
| EN 1889-2:2003+A1:2009 | Machines for underground mines - Mobile machines working underground - Safety - Part 2: Rail locomotives |
| EN 1834-2:2000 | Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 2: Group I engines for use in underground workings susceptible to firedamp and/or combustible dust |
| DIN EN 1889-2:2009-07 | MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 2: RAIL LOCOMOTIVES |
| EN 12111:2014 | Tunnelling machines - Road headers and continuous miners - Safety requirements |
| EN ISO 14314:2009 | Reciprocal internal combustion engines - Recoil starting equipment - General safety requirements (ISO 14314:2004) |
| EN 1834-3:2000 | Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 3: Group II engines for use in flammable dust atmospheres |
| ISO 3046-7:1995 | Reciprocating internal combustion engines — Performance — Part 7: Codes for engine power |
| EN 547-2:1996+A1:2008 | Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings |
| ISO 8178-5:2015 | Reciprocating internal combustion engines Exhaust emission measurement Part 5: Test fuels |
| EN ISO 11102-2:2009 | Reciprocating internal combustion engines - Handle starting equipment - Part 2: Method of testing the angle of disengagement (ISO 11102-2:1997) |
| IEC 61310-2:2007 | Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking |
| ISO 2710-1:2000 | Reciprocating internal combustion engines Vocabulary Part 1: Terms for engine design and operation |
| ISO 2710-2:1999 | Reciprocating internal combustion engines Vocabulary Part 2: Terms for engine maintenance |
| IEC 60073:2002 | Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators |
| ISO 7967-9:2010 | Reciprocating internal combustion engines Vocabulary of components and systems Part 9: Control and monitoring systems |
| ISO 3411:2007 | Earth-moving machinery Physical dimensions of operators and minimum operator space envelope |
| EN 61310-2:2008 | Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking |
| EN ISO 3411:2007 | Earth-moving machinery - Physical dimensions of operators and minimum operator space envelope (ISO 3411:2007) |
| EN 60073:2002 | Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators |
| EN 1834-2:2000 | Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 2: Group I engines for use in underground workings susceptible to firedamp and/or combustible dust |
| IEC 60331-11:1999+AMD1:2009 CSV | Tests for electric cables under fire conditions - Circuit integrity - Part 11: Apparatus - Fire alone at a flame temperature of at least 750 °C |
| ISO 13732-1:2006 | Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces |
| EN 60332-2-2:2004 | Tests on electric and optical fibre cables under fire conditions - Part 2-2: Test for vertical flame propagation for a single small insulated wire or cable - Procedure for diffusion flame |
| ISO 8178-1:2017 | Reciprocating internal combustion engines Exhaust emission measurement Part 1: Test-bed measurement systems of gaseous and particulate emissions |
| ISO 8178-2:2008 | Reciprocating internal combustion engines Exhaust emission measurement Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions |
| ISO 7967-4:2005 | Reciprocating internal combustion engines Vocabulary of components and systems Part 4: Pressure charging and air/exhaust gas ducting systems |
| EN ISO 13850:2015 | Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015) |
| ISO 7967-1:2005 | Reciprocating internal combustion engines — Vocabulary of components and systems — Part 1: Structure and external covers |
| IEC 60332-2-2:2004 | Tests on electric and optical fibre cables under fire conditions - Part 2-2: Test for vertical flame propagation for a single small insulated wire or cable - Procedure for diffusion flame |
| ISO 8999:2001 | Reciprocating internal combustion engines Graphical symbols |
| ISO 11102-1:1997 | Reciprocating internal combustion engines Handle starting equipment Part 1: Safety requirements and tests |
| EN 1175-1:1998+A1:2010 | Safety of industrial trucks - Electrical requirements - Part 1: General requirements for battery powered trucks |
| EN 1175-3:1998+A1:2010 | Safety of industrial trucks - Electrical requirements - Part 3: Specific requirements for the electric power transmission systems of internal combustion engine powered trucks |
| ISO 3046-5:2001 | Reciprocating internal combustion engines Performance Part 5: Torsional vibrations |
| EN ISO 13857:2008 | Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008) |
| EN 1175-2:1998+A1:2010 | Safety of industrial trucks - Electrical requirements - Part 2: General requirements of internal combustion engine powered trucks |
| ISO 7967-8:2005 | Reciprocating internal combustion engines — Vocabulary of components and systems — Part 8: Starting systems |
| EN ISO 13732-1:2008 | Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006) |
| ISO 9611:1996 | Acoustics — Characterization of sources of structure-borne sound with respect to sound radiation from connected structures — Measurement of velocity at the contact points of machinery when resiliently mounted |
| ISO 7967-3:2010 | Reciprocating internal combustion engines — Vocabulary of components and systems — Part 3: Valves, camshaft drives and actuating mechanisms |
| ISO 14314:2004 | Reciprocal internal combustion engines Recoil starting equipment General safety requirements |
| ISO 3046-4:2009 | Reciprocating internal combustion engines Performance Part 4: Speed governing |
| EN 953:1997+A1:2009 | Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards |
| ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
| IEC 60331-21:1999 | Tests for electric cables under fire conditions - Circuit integrity - Part 21: Procedures and requirements - Cables of rated voltage up to and including 0,6/1,0 kV |
| ISO 13857:2008 | Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs |
| IEC 60332-2-1:2004 | Tests on electric and optical fibre cables under fire conditions - Part 2-1: Test for vertical flame propagation for a single small insulated wire or cable - Apparatus |
| ISO 3046-1:2002 | Reciprocating internal combustion engines Performance Part 1: Declarations of power, fuel and lubricating oil consumptions, and test methods Additional requirements for engines for general use |
| ISO 8178-7:2015 | Reciprocating internal combustion engines Exhaust emission measurement Part 7: Engine family determination |
| EN 983:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics |
| ISO 8178-4:2017 | Reciprocating internal combustion engines Exhaust emission measurement Part 4: Steady-state and transient test cycles for different engine applications |
| ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
| ISO 13850:2015 | Safety of machinery Emergency stop function Principles for design |
| IEC 61310-1:2007 | Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals |
| EN 60332-2-1:2004 | Tests on electric and optical fibre cables under fire conditions - Part 2-1: Test for vertical flame propagation for a single small insulated wire or cable - Apparatus |
| ISO 6826:1997 | Reciprocating internal combustion engines Fire protection |
| ISO 2867:2011 | Earth-moving machinery Access systems |
| ISO 6798:1995 | Reciprocating internal combustion engines Measurement of emitted airborne noise Engineering method and survey method |
| EN 61310-1:2008 | Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals |
| EN ISO 11102-1:2009 | Reciprocating internal combustion engines - Handle starting equipment - Part 1: Safety requirements and tests (ISO 11102-1:1997) |
| ISO 3046-3:2006 | Reciprocating internal combustion engines Performance Part 3: Test measurements |
| ISO 2261:1994 | Reciprocating internal combustion engines Hand-operated control devices Standard direction of motion |
| ISO 8178-6:2000 | Reciprocating internal combustion engines Exhaust emission measurement Part 6: Report of measuring results and test |
| ISO 8178-8:2015 | Reciprocating internal combustion engines Exhaust emission measurement Part 8: Engine group determination |
| EN 1834-1:2000 | Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 1: Group II engines for use in flammable gas and vapour atmospheres |
| EN 60034-5:2001/A1:2007 | ROTATING ELECTRICAL MACHINES - PART 5: DEGREES OF PROTECTION PROVIDED BY THE INTEGRAL DESIGN OF ROTATING ELECTRICAL MACHINES (IP CODE) - CLASSIFICATION |
| ISO 11102-2:1997 | Reciprocating internal combustion engines Handle starting equipment Part 2: Method of testing the angle of disengagement |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.