EN 16286-1:2013
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Railway applications - Gangway systems between vehicles - Part 1: Main applications
30-09-2013
27-03-2013
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Abbreviated terms
5 General
6 Vehicle body coordinate system
7 Technical requirements
8 Interfaces with the vehicle
9 Testing
10 Maintenance
Annex A (normative) - Flange intercommunication
connections
Annex B (informative) - Interconnecting gangways
for coaches travelling at speeds of up to
200 km/h on high-speed lines with tunnel
sections
Annex ZA (informative) - Relationship between this
European Standard and the Essential
Requirements of EU Directive 2008/57/EC
Bibliography
This European Standard defines the technical and safety requirements applicable to gangway systems used in all railway vehicles such as tram, tram trains, coaches, metro, suburban, main line and high speed trains that carry passengers. A gangway system gives comfortable passage from one vehicle to the other and consists of a flexible component which allows relative movement between vehicles.It also defines:-the requirements for the safety for passengers and/or staff in the gangway while the train is running; -the assessment methods as well as pass/fail criteria for gangways installed on vehicles.
| Committee |
CEN/TC 256
|
| DevelopmentNote |
Supersedes PREN 16286-1. (04/2013)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Withdrawn
|
| Standards | Relationship |
| UNE-EN 16286-1:2014 | Identical |
| UNI EN 16286-1 : 2013 | Identical |
| SN EN 16286-1:2013 | Identical |
| I.S. EN 16286-1:2013 | Identical |
| PN EN 16286-1 : 2013 | Identical |
| NBN EN 16286-1 : 2013 | Identical |
| DIN EN 16286-1:2013-06 | Identical |
| NEN EN 16286-1 : 2013 | Identical |
| NS EN 16286-1 : 2013 | Identical |
| NF EN 16286-1 : 2013 | Identical |
| BS EN 16286-1:2013 | Identical |
| UNE-EN 16286-2:2014 | Railway applications - Gangway systems between vehicles - Part 2: Acoustic measurements |
| UNE-EN 16585-3:2018 | Railway applications - Design for PRM use - Equipment and components on board rolling stock - Part 3: Clearways and internal doors |
| BS EN 16839:2017 | Railway applications. Rolling stock. Head stock layout |
| I.S. EN 16585-3:2017 | RAILWAY APPLICATIONS - DESIGN FOR PRM USE - EQUIPMENT AND COMPONENTS ON BOARD ROLLING STOCK - PART 3: CLEARWAYS AND INTERNAL DOORS |
| DIN EN 16585-3 E : 2017 | RAILWAY APPLICATIONS - DESIGN FOR PRM USE - EQUIPMENT AND COMPONENTS ON BOARD ROLLING STOCK - PART 3: CLEARWAYS AND INTERNAL DOORS |
| 15/30309997 DC : 0 | BS EN 15663 - RAILWAY APPLICATIONS - VEHICLE REFERENCE MASSES |
| UNI EN 16286-2 : 2013 | RAILWAY APPLICATIONS - GANGWAY SYSTEMS BETWEEN VEHICLES - PART 2: ACOUSTIC MEASUREMENTS |
| DIN EN 16585-3:2017-05 | RAILWAY APPLICATIONS - DESIGN FOR PRM USE - EQUIPMENT AND COMPONENTS ON BOARD ROLLING STOCK - PART 3: CLEARWAYS AND INTERNAL DOORS |
| DIN EN 16286-2:2013-09 | Railway applications - Gangway systems between vehicles - Part 2: Acoustic measurements |
| I.S. EN 16839:2017 | RAILWAY APPLICATIONS - ROLLING STOCK - HEAD STOCK LAYOUT |
| EN 16839:2017 | Railway applications - Rolling stock - Head stock layout |
| EN 16286-2:2013 | Railway applications - Gangway systems between vehicles - Part 2: Acoustic measurements |
| EN 16585-3:2017 | Railway applications - Design for PRM use - Equipment and components on board rolling stock - Part 3: Clearways and internal doors |
| BS EN 16585-3:2017 | Railway applications. Design for PRM use. Equipment and components on board rolling stock Clearways and internal doors |
| BS EN 16286-2:2013 | Railway applications. Gangway systems between vehicles Acoustic measurements |
| DIN EN 16585-3:2013-07 (Draft) | RAILWAY APPLICATIONS - DESIGN FOR PRM USE - EQUIPMENT AND COMPONENTS ON BOARD ROLLING STOCK - PART 3: CLEARWAYS AND INTERNAL DOORS |
| I.S. EN 16286-2:2013 | RAILWAY APPLICATIONS - GANGWAY SYSTEMS BETWEEN VEHICLES - PART 2: ACOUSTIC MEASUREMENTS |
| UIC 567-1 : 1978 AMD 7 | STANDARD X AND Y COACHES ACCEPTED FOR RUNNING ON INTERNATIONAL SERVICES |
| EN 14752:2015 | Railway applications - Body side entrance systems for rolling stock |
| UIC 561 : 1991 AMD 1 | MEANS OF INTERCOMMUNICATION FOR COACHES |
| UIC 566 : 1990 AMD 1 | LOADINGS OF COACH BODIES AND THEIR COMPONENTS |
| EN 14067-4:2013 | Railway applications - Aerodynamics - Part 4: Requirements and test procedures for aerodynamics on open track |
| EN 16286-2:2013 | Railway applications - Gangway systems between vehicles - Part 2: Acoustic measurements |
| EN 15551:2017 | Railway applications - Railway rolling stock - Buffers |
| EN 50153 : 2014 AMD 1 2017 | RAILWAY APPLICATIONS - ROLLING STOCK - PROTECTIVE PROVISIONS RELATING TO ELECTRICAL HAZARDS |
| 2008/57/EC : 2008 AMD 5 2014 | DIRECTIVE 2008/1957/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 17 JUNE 2008 ON THE INTEROPERABILITY OF THE RAIL SYSTEM WITHIN THE COMMUNITY (RECAST) (TEXT WITH EEA RELEVANCE) |
| UIC 660 : 2ED 2002 | MEASURES TO ENSURE THE TECHNICAL COMPATIBILITY OF HIGH-SPEED TRAINS |
| EN ISO 6946:2017 | Building components and building elements - Thermal resistance and thermal transmittance - Calculation methods (ISO 6946:2017, Corrected version 2021-12) |
| EN 50125-1:2014 | Railway applications - Environmental conditions for equipment - Part 1: Rolling stock and on-board equipment |
| EN 15566:2016 | Railway applications - Railway rolling stock - Draw gear and screw coupling |
| EN 50126-1:2017 | Railway Applications - The Specification and Demonstration of Reliability, Availability, Maintainability and Safety (RAMS) - Part 1: Generic RAMS Process |
| UIC 560 : 12ED 2002 | DOORS, FOOTBOARDS, WINDOWS, STEPS, HANDLES AND HANDRAILS OF COACHES AND LUGGAGE VANS |
| EN 15153-1 : 2013 COR 2016 | RAILWAY APPLICATIONS - EXTERNAL VISIBLE AND AUDIBLE WARNING DEVICES FOR TRAINS - PART 1: HEAD, MARKER AND TAIL LAMPS |
| UIC 567-2 : 1991 AMD 2 | STANDARD Z-TYPE COACHES ACCEPTED FOR RUNNING IN INTERNATIONAL TRAFFIC - CHARACTERISTICS |
| EN 15663:2017 | Railway applications - Vehicle reference masses |
| EN 12663-1:2010+A1:2014 | Railway applications - Structural requirements of railway vehicle bodies - Part 1: Locomotives and passenger rolling stock (and alternative method for freight wagons) |
| ISO 6946:2017 | Building components and building elements — Thermal resistance and thermal transmittance — Calculation methods |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.