• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 15202:2012

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

LPG equipment and accessories - Essential operational dimensions for LPG cylinder valve outlet and associated equipment connections

Superseded date

11-12-2019

Superseded by

EN 15202:2019

Published date

23-05-2012

Sorry this product is not available in your region.

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations
5 Design
6 Connections in use
7 Unsafe connections
8 Tightening torque
9 Marking
Annex A (informative) - Connections by country
Annex B (normative) - Unsafe connections
Bibliography

This European Standard specifies basic connection dimensions of LPG cylinder valves (manufactured in accordance with EN ISO 14245 and EN ISO 15995) and connectors (including pressure regulators) to enable them to be safely connected together.NOTE 1Figure 1 (type G.1) to Figure 19 (type G.33) give the types of threaded outlet connections.NOTE 2Figure 20 (type G.50) to Figure 34 (type G.66) give the types of non-threaded outlet connections.This European Standard lists potentially unsafe connections where it may be possible to connect together, but which, when connected, may not be sound or secure in some operating conditions or orientations.This European Standard specifies a marking system that is intended to ensure that only valves and connecters that are marked with the same connector type number are used in combination.This European Standard also recommends tightening torques for the attachment of screwed metal-to-metal connections.Quality assurance systems, production testing and particularly certificates of conformity are not covered in this standard.This European Standard excludes connections for automotive vehicles covered by UN/ECE Regulation No. 67 Part 1 and EN 13760. This European Standard excludes connections for gas cartridges covered by EN 417.

Committee
CEN/TC 286
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Superseded
SupersededBy

Standards Relationship
SN EN 15202 : 2012 Identical
UNI EN 15202 : 2012 Identical
NEN EN 15202 : 2012 Identical
NBN EN 15202 : 2012 Identical
I.S. EN 15202:2012 Identical
PN EN 15202 : 2012 Identical
NF EN 15202 : 2013 Identical
BS EN 15202:2012 Identical
NS EN 15202 : 2012 Identical
UNE-EN 15202:2012 Identical
DIN EN 15202:2012-09 Identical
ONORM EN 15202 : 2012 Identical

EN 13175:2014 LPG Equipment and accessories - Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings
I.S. EN 13175:2014 LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS
UNE-EN 16119:2013 LPG equipment and accessories - Sealing caps and plugs for LPG cylinder and pressure vessel valves - Specification and testing
EN 16129:2013 Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their mixtures
DIN EN 1439:2017-10 LPG equipment and accessories - Procedure for checking transportable refillable LPG cylinders before, during and after filling
EN 1439:2017 LPG equipment and accessories - Procedure for checking transportable refillable LPG cylinders before, during and after filling
DIN EN 16119:2013-05 LPG equipment and accessories - Sealing caps and plugs for LPG cylinder and pressure vessel valves - Specification and testing
UNE-EN 13175:2015 LPG Equipment and accessories - Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings
PREN 16129 : DRAFT 2010 PRESSURE REGULATORS, AUTOMATIC CHANGE-OVER DEVICES, HAVING A MAXIMUM REGULATED PRESSURE OF 4 BAR, WITH A MAXIMUM CAPACITY OF 100 KG/H, ASSOCIATED SAFETY DEVICES AND ADAPTORS FOR BUTANE, PROPANE, AND THEIR MIXTURES
UNI EN 16119 : 2013 LPG EQUIPMENT AND ACCESSORIES - SEALING CAPS AND PLUGS FOR LPG CYLINDER AND PRESSURE VESSEL VALVES - SPECIFICATION AND TESTING
BS EN 13175:2014 LPG Equipment and accessories. Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings
DIN EN 14422:2013-09 CLAMP TYPE COUPLING ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS (LPG) TRANSFER HOSES
17/30362889 DC : 0 BS EN 13175 - LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS
I.S. EN 14422:2013 CLAMP TYPE COUPLING ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS (LPG) TRANSFER HOSES
10/30228056 DC : 0
10/30218988 DC : 0 BS EN 13175 - LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) TANK VALVES AND FITTINGS
UNI EN 13175 : 2015 LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS
UNE-EN 16129:2014 Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their mixtures
UNI EN 14422 : 2013 CLAMP TYPE COUPLING ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS (LPG) TRANSFER HOSES
UNI EN 16129 : 2013 PRESSURE REGULATORS, AUTOMATIC CHANGE-OVER DEVICES, HAVING A MAXIMUM REGULATED PRESSURE OF 4 BAR, WITH A MAXIMUM CAPACITY OF 150 KG/H, ASSOCIATED SAFETY DEVICES AND ADAPTORS FOR BUTANE, PROPANE, AND THEIR MIXTURES
10/30218991 DC : 0 BS EN 16119 - LPG EQUIPMENT AND ACCESSORIES - SEALING CAPS AND PLUGS FOR CYLINDER AND TANK VALVES - SPECIFICATION AND TESTING
I.S. EN 16119:2013 LPG EQUIPMENT AND ACCESSORIES - SEALING CAPS AND PLUGS FOR LPG CYLINDER AND PRESSURE VESSEL VALVES - SPECIFICATION AND TESTING
14/30300117 DC : 0 BS EN 13175 - LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS
18/30321883 DC : 0 BS EN ISO 15995 - GAS CYLINDERS - SPECIFICATIONS AND TESTING OF LPG CYLINDER VALVES - MANUALLY OPERATED
I.S. EN 16129:2013 PRESSURE REGULATORS, AUTOMATIC CHANGEOVER DEVICES, HAVING A MAXIMUM REGULATED PRESSURE OF 4 BAR, WITH A MAXIMUM CAPACITY OF 150 KG/H, ASSOCIATED SAFETY DEVICES AND ADAPTORS FOR BUTANE, PROPANE, AND THEIR MIXTURES
UNE-EN 1439:2017 LPG equipment and accessories - Procedure for checking transportable refillable LPG cylinders before, during and after filling
BS EN 14422:2013 Clamp type coupling assemblies for liquefied petroleum gas (LPG) transfer hoses
UNE-EN 14422:2014 Clamp type coupling assemblies for liquefied petroleum gas (LPG) transfer hoses
EN 14422:2013 Clamp type coupling assemblies for liquefied petroleum gas (LPG) transfer hoses
BS EN 16119:2013 LPG equipment and accessories. Sealing caps and plugs for LPG cylinder and pressure vessel valves. Specification and testing
BS EN 16129:2013 Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their mixtures
DIN EN 16129:2013-08 Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150kg/h, associated safety devices and adaptors for butane, propane, and their mixtures
DIN EN 1439:2015-10 (Draft) LPG EQUIPMENT AND ACCESSORIES - PROCEDURE FOR CHECKING TRANSPORTABLE REFILLABLE LPG CYLINDERS BEFORE, DURING AND AFTER FILLING
DIN EN 13175:2015-02 LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS
BS EN 1439:2017 LPG equipment and accessories. Procedure for checking transportable refillable LPG cylinders before, during and after filling
EN 16119:2013 LPG equipment and accessories - Sealing caps and plugs for LPG cylinder and pressure vessel valves - Specification and testing

CGA V 1 : 2013 STANDARD FOR COMPRESSED GAS CYLINDER VALVE OUTLET AND INLET CONNECTIONS
ISO 14245:2006 Gas cylinders Specifications and testing of LPG cylinder valves Self-closing
ISO 11114-1:2012 Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 1: Metallic materials
EN 13760:2003 Automotive LPG filling system for light and heavy duty vehicles - Nozzle, test requirements and dimensions
EN 417:2012 Non-refillable metallic gas cartridges for liquefied petroleum gases, with or without a valve, for use with portable appliances - Construction, inspection, testing and marking
EN ISO 3166-1:2014 Codes for the representation of names of countries and their subdivisions - Part 1: Country codes (ISO 3166-1:2013)
EN ISO 228-1:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
ISO 68-1:1998 ISO general purpose screw threads — Basic profile — Part 1: Metric screw threads
ISO 11114-2:2013 Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 2: Non-metallic materials
ISO 15995:2006 Gas cylinders Specifications and testing of LPG cylinder valves Manually operated
EN ISO 11114-2:2013 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials (ISO 11114-2:2013)
EN 13786:2004+A1:2008 Automatic change-over valves having a maximum outlet pressure of up to and including 4 bar with a capacity of up to and including 100 kg/h, and their associated safety devices for butane, propane or their mixtures
ISO 4658:1999 Acrylonitrile-butadiene rubber (NBR) Evaluation procedure
EN 13785:2005+A1:2008 Regulators with a capacity of up to and including 100 kg/h, having a maximum nominal outlet pressure of up to and including 4 bar, other than those covered by EN 12864 and their associated safety devices for butane, propane or their mixtures
ISO 3166-1:2013 Codes for the representation of names of countries and their subdivisions Part 1: Country codes
ISO 3601-1:2012 Fluid power systems — O-rings — Part 1: Inside diameters, cross-sections, tolerances and designation codes
EN 549:1994 Rubber materials for seals and diaphragms for gas appliances and gas equipment
EN ISO 15995:2010 Gas cylinders - Specifications and testing of LPG cylinder valves - Manually operated (ISO 15995:2006)
ISO 228-1:2000 Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation
EN ISO 14245:2010 Gas cylinders - Specifications and testing of LPG cylinder valves - Self-closing (ISO 14245:2006)

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.