EN 14904:2006
Current
The latest, up-to-date edition.
Surfaces for sports areas - Indoor surfaces for multi-sports use - Specification
12-04-2006
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements for safety in use
4.1 General
4.2 Friction
4.3 Shock absorption
4.4 Vertical deformation
5 Technical requirements
5.1 Vertical ball behaviour
5.2 Resistance to a rolling load
5.3 Resistance to wear
5.4 Reaction to fire
5.5 Formaldehyde emission
5.6 Content of pentachlorophenol (PCP)
5.7 Specular reflectance
5.8 Specular gloss
5.9 Resistance to indentation
5.10 Resistance to impact
5.11 Degree of evenness
6 Evaluation of conformity
6.1 General
6.2 Type testing
6.3 Factory production control (FPC)
7 Marking and labelling
Annex A (informative) - Resistance to repeated impact of
synthetic sports floors
Annex B (informative) - Shock absorption and vertical
deformation types for elastic
sports floors
Annex C (normative) - Analysis of pentachlorophenol in
sports floor covering
C.1 General
C.2 Reagents
C.3 Apparatus
C.4 Sampling and specimen preparation
C.5 Sample extraction and analysis
C.6 Expression of results
Annex D (normative) - Factory production control
D.1 General
D.2 Control of raw material
D.3 Process control
D.4 Calibration plan
D.5 Testing of finished products
D.6 Inspection and testing status of products
D.7 Traceability
Annex ZA (informative) - Clauses of this European Standard
addressing provisions of the EU
Construction Products Directive
This European Standard specifies requirements for surfaces for indoor facilities for multi-sports use. It also covers surface systems which include both their supporting and upper layers whether prefabricated, produced in situ or a combination of the two. It also provides for the evaluation of conformity of products to the requirements of this European Standard. This European Standard is not applicable to indoor tennis halls.NOTE"Multi-sports" will be defined by appropriate national provisions.
Committee |
CEN/TC 217
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Current
|
Standards | Relationship |
BS EN 14904:2006 | Identical |
NS EN 14904 : 1ED 2006 | Identical |
DIN EN 14904:2015-09 (Draft) | Identical |
NF EN 14904 : 2006 | Identical |
I.S. EN 14904:2006 | Identical |
PN EN 14904 : 2009 | Identical |
UNE-EN 14904:2007 | Identical |
NEN EN 14904 : 2006 | Identical |
UNI EN 14904 : 2006 | Identical |
NBN EN 14904 : NOV 2006 | Identical |
SN EN 14904 : 2006 | Identical |
UNE-EN 14904:2006 | Identical |
DIN EN 14904:2006-06 | Identical |
93/68/EEC : 1993 AMD 2 1998 | COUNCIL DIRECTIVE 93/68/EEC OF 22.7.93 AMENDING DIRECTIVES 87/404/EEC, 88/378/EEC, 89/106/EEC, 89/336/EEC, 89/392/EEC, 89/686/EEC, 90/384/EEC, 90/385/EEC, 90/396/EEC, 91/263/EEC, 92/42/EEC AND 73/23/EEC |
EN 12235:2013 | Surfaces for sports areas - Determination of vertical ball behaviour |
EN 1569:1999 | Surfaces for sports areas - Determination of the behaviour under a rolling load |
EN ISO 5470-1:2016 | Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 1: Taber abrader (ISO 5470-1:2016) |
ISO 1957:2000 | Machine-made textile floor coverings Selection and cutting of specimens for physical tests |
EN 14808:2005 | Surfaces for sports areas - Determination of shock absorption |
89/106/EEC : 1988 | COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS |
ISO 5470:1980 | Rubber or plastics coated fabrics Determination of abrasion resistance |
EN 517:2006 | Prefabricated accessories for roofing - Roof safety hooks |
EN 12673:1998 | Water quality - Gas chromatographic determination of some selected chlorophenols in water |
EN 717-1:2004 | Wood-based panels - Determination of formaldehyde release - Part 1: Formaldehyde emission by the chamber method |
EN 13036-4:2011 | Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface: The pendulum test |
EN 13745:2004 | Surfaces for sports areas - Determination of specular reflectance |
EN 13238:2010 | Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates |
CEN/TS 15122:2005 | Surfaces for sports areas - Determination of resistance of synthetic sports surfaces to repeated impact |
EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
ISO 9001:2015 | Quality management systems — Requirements |
EN 516:2006 | Prefabricated accessories for roofing - Installations for roof access - Walkways, treads and steps |
EN 13036-7:2003 | Road and airfield surface characteristics - Test methods - Part 7: Irregularity measurement of pavement courses : the straightedge test |
ISO 11379:2009 | Textile floor coverings Laboratory cleaning procedure using spray extraction |
ISO 2813:2014 | Paints and varnishes — Determination of gloss value at 20°, 60° and 85° |
EN ISO 2813:2014 | Paints and varnishes - Determination of gloss value at 20°, 60° and 85° (ISO 2813:2014) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.