EN 14899:2005
Current
The latest, up-to-date edition.
Characterization of waste - Sampling of waste materials - Framework for the preparation and application of a Sampling Plan
07-12-2005
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Preparation of a Sampling Plan
4.1 Principle
4.2 Key elements of a Sampling Plan
4.2.1 Involved parties
4.2.2 Objectives of the Testing Programme
4.2.3 Testing level
4.2.4 Identify constituents to be tested
4.2.5 Background information on material
4.2.6 Health and safety
4.2.7 Select sampling approach
4.2.8 Identify sampling technique
5 Sampling
5.1 Taking the sample
5.2 Delivery
6 Reporting
6.1 Document Sampling Plan
6.2 Sampling Record
Annex A (informative) Example information Sampling Plan
Annex B (informative) Example information Sampling Record
Bibliography
This European Standard specifies the procedural steps to be taken in the preparation and application of a Sampling Plan. The Sampling Plan describes the method of collection of the laboratory sample necessary for meeting the objective of the testing programme. The principles or basic rules outlined in this European Standard, provide a framework that can be used by the project manager to:produce standardised Sampling Plans for use in regular or routine circumstances (elaboration of daughter/derived standards dedicated to well defined sampling scenarios);incorporate the specific sampling requirements of European and national legislation;design and develop a Sampling Plan for use on a case by case basis.This European Standard has been developed for the characterization of waste.There may be a need for more than one Sampling Plan to meet all the requirements of the testing programme. Ultimately the Sampling Plan provides the sampler with detailed instructions on how sampling should be carried out.NOTEAlthough this European Standard in most cases refers to the taking of one sample or increment or the preparation of one laboratory sample, it should be noted that often this should be more than one. For simplicity reasons this European Standard uses singular terms, while plural terms are also possible or even likely.
Committee |
CEN/TC 444
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Current
|
Standards | Relationship |
UNE-EN 14899:2007 | Identical |
SN EN 14899 : 2006 | Identical |
NS EN 14899 : 1ED 2006 | Identical |
BS EN 14899:2005 | Identical |
NF EN 14899 : 2006 | Identical |
I.S. EN 14899:2006 | Identical |
UNI EN 14899 : 2006 | Identical |
NBN EN 14899 : 2006 | Identical |
PN EN 14899 : 2006 | Identical |
NEN EN 14899 : 2005 | Identical |
DIN EN 14899:2006-04 | Identical |
UNE-EN 14899:2005 | Identical |
S.R. CEN TS 14243:2010 | MATERIALS PRODUCED FROM END OF LIFE TYRES - SPECIFICATION OF CATEGORIES BASED ON THEIR DIMENSION(S) AND IMPURITIES AND METHODS FOR DETERMINING THEIR DIMENSION(S) AND IMPURITIES |
BS EN 14997:2015 | Characterization of waste. Leaching behaviour test. Influence of pH on leaching with continuous pH control |
UNE-EN 14429:2015 | Characterization of waste - Leaching behaviour test - Influence of pH on leaching with initial acid/base addition |
BS EN 14405:2017 | Characterization of waste - Leaching behaviour test - Up-flow percolation test (under specified conditions) |
I.S. CEN TR 15310-2:2006 | CHARACTERIZATION OF WASTE - SAMPLING OF WASTE MATERIALS - PART 2: GUIDANCE ON SAMPLING TECHNIQUES |
14/30304804 DC : 0 | BS EN 14405 - CHARACTERISATION OF WASTE - LEACHING BEHAVIOUR TEST - UP-FLOW PERCOLATION TEST (UNDER SPECIFIED CONDITIONS) |
PD CLC/TS 50625-3-5:2017 | Collection, logistics & Treatment requirements for WEEE Technical specification for de-pollution. Photovoltaic panels |
PD CEN/TR 15310-4:2006 | Characterization of waste. Sampling of waste materials Guidance on procedures for sample packaging, storage, preservation, transport and delivery |
PD CEN/TR 15310-2:2006 | Characterization of waste. Sampling of waste materials Guidance on sampling techniques |
UNI CEN/TS 16229 : 2012 | CHARACTERIZATION OF WASTE - SAMPLING AND ANALYSIS OF WEAK ACID DISSOCIABLE CYANIDE DISCHARGED INTO TAILINGS PONDS |
PD CLC/TS 50625-3-1:2015 | Collection, logistics & treatment requirements for WEEE Specification for de-pollution. General |
UNI EN 15442 : 2011 | SOLID RECOVERED FUELS - METHODS FOR SAMPLING |
DD CEN/TS 14997:2006 | Characterization of waste. Leaching behaviour tests. Influence of pH on leaching with continuous pH-control |
I.S. EN ISO 12782-4:2012 | SOIL QUALITY - PARAMETERS FOR GEOCHEMICAL MODELLING OF LEACHING AND SPECIATION OF CONSTITUENTS IN SOILS AND MATERIALS - PART 4: EXTRACTION OF HUMIC SUBSTANCES FROM SOLID SAMPLES (ISO 12782-4:2012) |
S.R. CLC/TS 50625-3-2:2016 | COLLECTION, LOGISTICS & TREATMENT REQUIREMENTS FOR WEEE - PART 3-2: TECHNICAL SPECIFICATION FOR DE-POLLUTION - LAMPS |
I.S. CEN TS 14997:2006 | CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TESTS - INFLUENCE OF PH ON LEACHING WITH CONTINUOUS PH-CONTROL |
I.S. CEN TR 15310-3:2006 | CHARACTERIZATION OF WASTE - SAMPLING OF WASTE MATERIALS - PART 3: GUIDANCE ON PROCEDURES FOR SUB-SAMPLING IN THE FIELD |
DIN EN 15863:2015-06 | CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TEST FOR BASIC CHARACTERIZATION - DYNAMIC MONOLITHIC LEACHING TEST WITH PERIODIC LEACHANT RENEWAL, UNDER FIXED CONDITIONS |
EN 14997:2015 | Characterization of waste - Leaching behaviour test - Influence of pH on leaching with continuous pH control |
EN 14405:2017 | Characterization of waste - Leaching behaviour test - Up-flow percolation test (under specified conditions) |
CEN/TR 15310-1:2006 | Characterization of waste - Sampling of waste materials - Part 1: Guidance on selection and application of criteria for sampling under various conditions |
CEN/TR 15310-4:2006 | Characterization of waste - Sampling of waste materials - Part 4: Guidance on procedures for sample packaging, storage, preservation, transport and delivery |
EN 50625-1:2014 | Collection, logistics & Treatment requirements for WEEE - Part 1: General treatment requirements |
CEN/TR 15310-3:2006 | Characterization of waste - Sampling of waste materials - Part 3: Guidance on procedures for sub-sampling in the field |
CEN/TS 16229:2011 | Characterization of waste - Sampling and analysis of weak acid dissociable cyanide discharged into tailings ponds |
CEN/TR 16365:2012 | Characterization of waste - Sampling of waste from extractive industries |
CEN/TS 14243:2010 | Materials produced from end of life tyres - Specification of categories based on their dimension(s) and impurities and methods for determining their dimension(s) and impurities |
CEN/TR 15310-5:2006 | Characterization of waste - Sampling of waste materials - Part 5: Guidance on the process of defining the sampling plan |
EN 15863:2015 | Characterization of waste - Leaching behaviour test for basic characterization - Dynamic monolithic leaching test with periodic leachant renewal, under fixed conditions |
CEN/TS 15442:2006 | Solid recovered fuels - Methods for sampling |
CEN/TS 15364:2006 | Characterization of waste - Leaching behaviour tests - Acid and base neutralization capacity test |
DIN EN 14997:2015-05 | CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TEST - INFLUENCE OF PH ON LEACHING WITH CONTINUOUS PH CONTROL |
S.R. CLC/TS 50625-3-5:2017 | COLLECTION, LOGISTICS & TREATMENT REQUIREMENTS FOR WEEE - PART 3-5: TECHNICAL SPECIFICATION FOR DE-POLLUTION - PHOTOVOLTAIC PANELS |
UNI EN 16457 : 2014 | CHARACTERIZATION OF WASTE - FRAMEWORK FOR THE PREPARATION AND APPLICATION OF A TESTING PROGRAMME - OBJECTIVES, PLANNING AND REPORT |
PD CLC/TS 50625-3-4:2017 | Collection, logistics & treatment requirements for WEEE Specification for de-pollution. Temperature exchange equipment |
BS EN ISO 12782-1:2012 | Soil quality. Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials Extraction of amorphous iron oxides and hydroxides with ascorbic acid |
CLC/TS 50625-3-5:2017 | Collection, logistics & Treatment requirements for WEEE - Part 3-5: Technical specification for de-pollution - Photovoltaic panels |
PD CEN/TR 16365:2012 | Characterization of waste. Sampling of waste from extractive industries |
PD CEN/TR 15310-1:2006 | Characterization of waste. Sampling of waste materials Guidance on selection and application of criteria for sampling under various conditions |
PD CEN/TR 15310-3:2006 | Characterization of waste. Sampling of waste materials Guidance on procedures for sub-sampling in the field |
PREN 14429 : DRAFT 2013 | CHARACTERISATION OF WASTE - LEACHING BEHAVIOUR TEST - INFLUENCE OF PH ON LEACHING WITH INITIAL ACID/BASE ADDITION |
CLC/TS 50625-3-3:2017 | Collection, logistics & treatment requirements for WEEE - Part 3-3: Specification for de-pollution - WEEE containing CRTs and flat panel displays |
DIN EN ISO 12782-3:2012-09 | Soil quality - Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials - Part 3: Extraction of aluminium oxides and hydroxides with ammonium oxalate/oxalic acid (ISO 12782-3:2012) |
UNI EN ISO 12782-1 : 2012 | SOIL QUALITY - PARAMETERS FOR GEOCHEMICAL MODELLING OF LEACHING AND SPECIATION OF CONSTITUENTS IN SOILS AND MATERIALS - PART 1: EXTRACTION OF AMORPHOUS IRON OXIDES AND HYDROXIDES WITH ASCORBIC ACID |
I.S. EN 16457:2014 | CHARACTERIZATION OF WASTE - FRAMEWORK FOR THE PREPARATION AND APPLICATION OF A TESTING PROGRAMME - OBJECTIVES, PLANNING AND REPORT |
I.S. EN 50625-1:2014 | COLLECTION, LOGISTICS & TREATMENT REQUIREMENTS FOR WEEE - PART 1: GENERAL TREATMENT REQUIREMENTS |
PREN 14405 : DRAFT 2014 | CHARACTERISATION OF WASTE - LEACHING BEHAVIOUR TEST - UP-FLOW PERCOLATION TEST (UNDER SPECIFIED CONDITIONS) |
CLC/TS 50625-3-2:2016 | Collection, logistics & Treatment requirements for WEEE - Part 3-2: Technical specification for de-pollution - Lamps |
UNE-EN 14405:2017 | Characterization of waste - Leaching behaviour test - Up-flow percolation test (under specified conditions) |
17/30348303 DC : 0 | BS EN 17087 - CONSTRUCTION PRODUCTS - ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - PREPARATION OF TEST PORTIONS FROM THE LABORATORY SAMPLE FOR TESTING OF RELEASE AND ANALYSIS OF CONTENT |
UNE-EN 15863:2015 | Characterization of waste - Leaching behaviour test for basic characterization - Dynamic monolithic leaching test with periodic leachant renewal, under fixed conditions |
UNE-EN 15002:2015 | Characterization of waste - Preparation of test portions from the laboratory sample |
ISO 12782-2:2012 | Soil quality — Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials — Part 2: Extraction of crystalline iron oxides and hydroxides with dithionite |
10/30232771 DC : 0 | PD CEN/TR 16130 - CHARACTERISATION OF WASTE - ON-SITE VERIFICATION |
S.R. CEN/TS 15863:2012 | CHARACTERISATION OF WASTE - LEACHING BEHAVIOUR TEST FOR BASIC CHARACTERISATION - DYNAMIC MONOLITHIC LEACHING TEST WITH PERIODIC LEACHANT RENEWAL, UNDER FIXED TEST CONDITIONS |
S.R. CEN/TR 16130:2011 | CHARACTERIZATION OF WASTE - ON-SITE VERIFICATION |
I.S. EN 15002:2015 | CHARACTERIZATION OF WASTE - PREPARATION OF TEST PORTIONS FROM THE LABORATORY SAMPLE |
ONORM EN 14735 : 2006 | CHARACTERIZATION OF WASTE - PREPARATION OF WASTE SAMPLES FOR ECOTOXICITY TESTS |
S.R. CLC/TS 50625-3-4:2017 | COLLECTION, LOGISTICS & TREATMENT REQUIREMENTS FOR WEEE - PART 3-4: SPECIFICATION FOR DE-POLLUTION - TEMPERATURE EXCHANGE EQUIPMENT |
DIN EN ISO 12782-4:2012-09 | Soil quality - Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials - Part 4: Extraction of humic substances from solid samples (ISO 12782-4:2012) |
DIN EN 15442:2011-05 | Solid recovered fuels - Methods for sampling; German version EN 15442:2011 |
PD CEN/TS 16660:2015 | Characterization of waste. Leaching behaviour test. Determination of the reducing character and the reducing capacity |
S.R. CLC/TS 50625-3-3:2017 | COLLECTION, LOGISTICS & TREATMENT REQUIREMENTS FOR WEEE - PART 3-3: SPECIFICATION FOR DE-POLLUTION - WEEE CONTAINING CRTS AND FLAT PANEL DISPLAYS |
BS EN ISO 12782-3:2012 | Soil quality. Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials Extraction of aluminium oxides and hydroxides with ammonium oxalate/oxalic acid |
BS EN 15875:2011 | Characterisation of waste. Static test for determination of acid potential and neutralisation potential of sulfidic waste |
07/30161754 DC : 0 | BS ISO 15270 - PLASTICS - GUIDELINES FOR THE RECOVERY AND RECYCLING OF PLASTICS WASTE |
I.S. EN 15442:2011 | SOLID RECOVERED FUELS - METHODS FOR SAMPLING |
BS EN 15442:2011 | Solid recovered fuels. Methods for sampling |
UNE-EN 14997:2015 | Characterization of waste - Leaching behaviour test - Influence of pH on leaching with continuous pH control |
PD CLC/TS 50574-2:2014 | Collection, logistics & treatment requirements for end-of-life household appliances containing volatile fluorocarbons or volatile hydrocarbons Specification for de-pollution |
UNE-EN 16457:2014 | Characterization of waste - Framework for the preparation and application of a testing programme - Objectives, planning and report |
DD CEN/TS 15364:2006 | Characterization of waste. Leaching behaviour tests. Acid and base neutralization capacity test |
PD CLC/TS 50625-3-3:2017 | Collection, logistics & treatment requirements for WEEE Specification for de-pollution. WEEE containing CRTs and flat panel displays |
DD CEN/TS 14243:2010 | Materials produced from end of life tyres. Specification of categories based on their dimension(s) and impurities and methods for determining their dimension(s) and impurities |
UNI EN ISO 12782-3 : 2012 | SOIL QUALITY - PARAMETERS FOR GEOCHEMICAL MODELLING OF LEACHING AND SPECIATION OF CONSTITUENTS IN SOILS AND MATERIALS - PART 3: EXTRACTION OF ALUMINIUM OXIDES AND HYDROXIDES WITH AMMONIUM OXALATE/OXALIC ACID |
ISO 15270:2008 | Plastics — Guidelines for the recovery and recycling of plastics waste |
S.R. CEN TR 16110:2010 | CHARACTERIZATION OF WASTE - GUIDANCE ON THE USE OF ECOTOXICITY TESTS APPLIED TO WASTE |
FD CEN/TR 16130 : 2011 FD | CHARACTERIZATION OF WASTE - ON-SITE VERIFICATION |
S.R. CEN/TR 16365:2012 | CHARACTERIZATION OF WASTE - SAMPLING OF WASTE FROM EXTRACTIVE INDUSTRIES |
UNE-CEN/TS 14243:2012 EX | Materials produced from end of life tyres - Specification of categories based on their dimension(s) and impurities and methods for determining their dimension(s) and impurities |
UNI CEN/TS 14243 : 2010 | MATERIALS PRODUCED FROM END OF LIFE TYRES - SPECIFICATION OF CATEGORIES BASED ON THEIR DIMENSION(S) AND IMPURITIES AND METHODS FOR DETERMINING THEIR DIMENSION(S) AND IMPURITIES |
EN 15442:2011 | Solid recovered fuels - Methods for sampling |
DIN EN 14405:2017-05 | CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TEST - UP-FLOW PERCOLATION TEST (UNDER SPECIFIED CONDITIONS) |
PD CEN/TS 15864:2012 | Characterisation of waste. Leaching behaviour test for basic characterisation. Dynamic monolithic leaching test with continuous leachant renewal under conditions relevant for specified scenario(s) |
DIN EN ISO 12782-2:2012-09 | Soil quality - Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials - Part 2: Extraction of crystalline iron oxides and hydroxides with dithionite (ISO 12782-2:2012) |
DD CEN/TS 15442:2006 | Solid recovered fuels. Methods for sampling |
I.S. EN 15863:2015 | CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TEST FOR BASIC CHARACTERIZATION - DYNAMIC MONOLITHIC LEACHING TEST WITH PERIODIC LEACHANT RENEWAL, UNDER FIXED CONDITIONS |
I.S. CEN TS 15364:2006 | CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TESTS - ACID AND BASE NEUTRALIZATION CAPACITY TEST |
PD CLC/TS 50625-3-2:2016 | Collection, logistics & treatment requirements for WEEE Technical specification for de-pollution. Lamps |
I.S. EN 14405:2017 | CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TEST - UP-FLOW PERCOLATION TEST (UNDER SPECIFIED CONDITIONS) |
DIN EN 15875:2012-11 | Characterization of waste - Static test for determination of acid potential and neutralisation potential of sulfidic waste (includes Corrigendum :2012) |
S.R. CLC/TS 50625-3-1:2015 | COLLECTION, LOGISTICS & TREATMENT REQUIREMENTS FOR WEEE - PART 3-1: SPECIFICATION FOR DE-POLLUTION - GENERAL |
DIN EN 14429:2015-05 | CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TEST - INFLUENCE OF PH ON LEACHING WITH INITIAL ACID/BASE ADDITION |
12/30263896 DC : 0 | BS EN 16457 - CHARACTERIZATION OF WASTE - FRAMEWORK FOR THE PREPARATION AND APPLICATION OF A TESTING PROGRAMME - OBJECTIVES, PLANNING AND REPORT |
08/30185785 DC : DRAFT OCT 2008 | BS EN 15863 - CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TEST FOR BASIC CHARACTERIZATION - DYNAMIC MONOLITHIC LEACHING TEST WITH PERIODIC LEACHANT RENEWAL, UNDER FIXED TEST CONDITIONS |
BS EN ISO 12782-2:2012 | Soil quality. Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials Extraction of crystalline iron oxides and hydroxides with dithionite |
PD CEN/TR 15310-5:2006 | Characterization of waste. Sampling of waste materials Guidance on the process of defining the sampling plan |
UNI EN 15875 : 2011 | CHARACTERIZATION OF WASTE - STATIC TEST FOR DETERMINATION OF ACID POTENTIAL AND NEUTRALISATION POTENTIAL OF SULFIDIC WASTE |
FD CEN/TR 16110 : 2011 FD | CHARACTERIZATION OF WASTE - GUIDANCE ON THE USE OF ECOTOXICITY TESTS APPLIED TO WASTE |
UNI EN ISO 12782-2 : 2012 | SOIL QUALITY - PARAMETERS FOR GEOCHEMICAL MODELLING OF LEACHING AND SPECIATION OF CONSTITUENTS IN SOILS AND MATERIALS - PART 2: EXTRACTION OF CRYSTALLINE IRON OXIDES AND HYDROXIDES WITH DITHIONITE |
UNI CEN/TR 15310-1 : 2013 | CHARACTERIZATION OF WASTE - SAMPLING OF WASTE MATERIALS - PART 1: GUIDANCE ON SELECTION AND APPLICATION OF CRITERIA FOR SAMPLING UNDER VARIOUS CONDITIONS |
CLC/TS 50625-3-4:2017 | Collection, logistics & treatment requirements for WEEE - Part 3-4: Specification for de-pollution - temperature exchange equipment |
DIN EN 16457:2014-07 | CHARACTERIZATION OF WASTE - FRAMEWORK FOR THE PREPARATION AND APPLICATION OF A TESTING PROGRAMME - OBJECTIVES, PLANNING AND REPORT |
UNI EN ISO 12782-4 : 2012 | SOIL QUALITY - PARAMETERS FOR GEOCHEMICAL MODELLING OF LEACHING AND SPECIATION OF CONSTITUENTS IN SOILS AND MATERIALS - PART 4: EXTRACTION OF HUMIC SUBSTANCES FROM SOLID SAMPLES |
I.S. EN 14429:2015 | CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TEST - INFLUENCE OF PH ON LEACHING WITH INITIAL ACID/BASE ADDITION |
CEI CLC/TS 50625-3-2 : 1ED 2017 | COLLECTION, LOGISTICS & TREATMENT REQUIREMENTS FOR WEEE - PART 3-2: TECHNICAL SPECIFICATION FOR DE-POLLUTION - LAMPS |
S.R. CEN/TS 15864:2015 | CHARACTERISATION OF WASTE - LEACHING BEHAVIOUR TEST FOR BASIC CHARACTERIZATION - DYNAMIC MONOLITHIC LEACHING TEST WITH CONTINUOUS LEACHANT RENEWAL UNDER CONDITIONS RELEVANT FOR SPECIFIED SCENARIO(S) |
I.S. CEN TR 15310-4:2006 | CHARACTERIZATION OF WASTE - SAMPLING OF WASTE MATERIALS - PART 4: GUIDANCE ON PROCEDURES FOR SAMPLE PACKAGING, STORAGE, PRESERVATION, TRANSPORT AND DELIVERY |
PD CEN/TS 15863:2012 | Characterisation of waste. Leaching behaviour test for basic characterisation. Dynamic monolithic leaching test with periodic leachant renewal, under fixed test conditions |
13/30291099 DC : 0 | BS EN 15002 - CHARACTERIZATION OF WASTE - PREPARATION OF TEST PORTIONS FROM THE LABORATORY SAMPLE |
BS EN 15863:2015 | Characterization of waste. Leaching behaviour test for basic characterization. Dynamic monolithic leaching test with periodic leachant renewal, under fixed conditions |
ISO 12782-1:2012 | Soil quality — Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials — Part 1: Extraction of amorphous iron oxides and hydroxides with ascorbic acid |
ISO 12782-3:2012 | Soil quality — Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials — Part 3: Extraction of aluminium oxides and hydroxides with ammonium oxalate/oxalic acid |
ISO 12782-4:2012 | Soil quality — Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials — Part 4: Extraction of humic substances from solid samples |
DIN EN 15002:2015-07 | CHARACTERIZATION OF WASTE - PREPARATION OF TEST PORTIONS FROM THE LABORATORY SAMPLE |
EN 15002:2015 | Characterization of waste - Preparation of test portions from the laboratory sample |
EN ISO 12782-4:2012 | Soil quality - Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials - Part 4: Extraction of humic substances from solid samples (ISO 12782-4:2012) |
EN ISO 12782-3:2012 | Soil quality - Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials - Part 3: Extraction of aluminium oxides and hydroxides with ammonium oxalate/oxalic acid (ISO 12782-3:2012) |
EN ISO 12782-2:2012 | Soil quality - Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials - Part 2: Extraction of crystalline iron oxides and hydroxides with dithionite (ISO 12782-2:2012) |
EN 16457:2014 | Characterization of waste - Framework for the preparation and application of a testing programme - Objectives, planning and report |
EN ISO 12782-1:2012 | Soil quality - Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials - Part 1: Extraction of amorphous iron oxides and hydroxides with ascorbic acid (ISO 12782-1:2012) |
CLC/TS 50625-3-1:2015 | Collection, logistics & treatment requirements for WEEE - Part 3-1: Specification for de-pollution - General |
UNE-EN 15442:2012 | Solid recovered fuels - Methods for sampling |
BS EN 50625-1:2014 | Collection, logistics & Treatment requirements for WEEE General treatment requirements |
13/30286649 DC : 0 | BS EN 14429 - CHARACTERISATION OF WASTE - LEACHING BEHAVIOUR TEST - INFLUENCE OF PH ON LEACHING WITH INITIAL ACID/BASE ADDITION |
13/30286658 DC : 0 | BS EN 16660 - CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TEST - DETERMINATION OF THE REDUCING CHARACTER AND THE REDUCING CAPACITY |
BS EN 14429:2015 | Characterization of waste. Leaching behaviour test. Influence of pH on leaching with initial acid/base addition |
I.S. CEN TR 15310-5:2006 | CHARACTERIZATION OF WASTE - SAMPLING OF WASTE MATERIALS - PART 5: GUIDANCE ON THE PROCESS OF DEFINING THE SAMPLING PLAN |
16/30310185 DC : 0 | BS ISO 18400-104 - SOIL QUALITY - SAMPLING - PART 104: STRATEGIES |
S.R. CLC/TS 50574-2:2014 | COLLECTION, LOGISTICS & TREATMENT REQUIREMENTS FOR END-OF-LIFE HOUSEHOLD APPLIANCES CONTAINING VOLATILE FLUOROCARBONS OR VOLATILE HYDROCARBONS - PART 2: SPECIFICATION FOR DE-POLLUTION |
DIN EN 16457 E : 2014 | CHARACTERIZATION OF WASTE - FRAMEWORK FOR THE PREPARATION AND APPLICATION OF A TESTING PROGRAMME - OBJECTIVES, PLANNING AND REPORT |
DIN EN ISO 12782-1:2012-09 | Soil quality - Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials - Part 1: Extraction of amorphous iron oxides and hydroxides with ascorbic acid (ISO 12782-1:2012) |
I.S. EN 15875:2011 | CHARACTERIZATION OF WASTE - STATIC TEST FOR DETERMINATION OF ACID POTENTIAL AND NEUTRALISATION POTENTIAL OF SULFIDIC WASTE |
BS EN ISO 12782-4:2012 | Soil quality. Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials Extraction of humic substances from solid samples |
CLC/TS 50574-2:2014 | Collection, logistics & treatment requirements for end-of-life household appliances containing volatile fluorocarbons or volatile hydrocarbons - Part 2: specification for de-pollution |
09/30202012 DC : 0 | BS EN 15442 - SOLID RECOVERED FUELS - METHODS FOR SAMPLING |
13/30286652 DC : 0 | BS EN 14997 - CHARACTERISATION OF WASTE - LEACHING BEHAVIOUR TEST - INFLUENCE OF PH ON LEACHING WITH CONTINUOUS PH CONTROL |
NF EN 15875 : 2011 | CHARACTERIZATION OF WASTE - STATIC TEST FOR DETERMINATION OF ACID POTENTIAL AND NEUTRALISATION POTENTIAL OF SULFIDIC WASTE |
BS EN 16457:2014 | Characterization of waste. Framework for the preparation and application of a testing programme. Objectives, planning and report |
UNE-EN 50625-1:2014 | Collection, logistics & Treatment requirements for WEEE - Part 1: General treatment requirements |
UNE-EN 15875:2012 | Characterization of waste - Static test for determination of acid potential and neutralisation potential of sulfidic waste |
08/30189276 DC : 0 | BS EN 15875 - CHARACTERIZATION OF WASTE - STATIC TEST FOR DETERMINATION OF ACID POTENTIAL OF SULFIDIC WASTE |
I.S. CEN TS 15442:2006 | SOLID RECOVERED FUELS - METHODS FOR SAMPLING |
I.S. EN ISO 12782-2:2012 | SOIL QUALITY - PARAMETERS FOR GEOCHEMICAL MODELLING OF LEACHING AND SPECIATION OF CONSTITUENTS IN SOILS AND MATERIALS - PART 2: EXTRACTION OF CRYSTALLINE IRON OXIDES AND HYDROXIDES WITH DITHIONITE (ISO 12782-2:2012) |
I.S. EN ISO 12782-3:2012 | SOIL QUALITY - PARAMETERS FOR GEOCHEMICAL MODELLING OF LEACHING AND SPECIATION OF CONSTITUENTS IN SOILS AND MATERIALS - PART 3: EXTRACTION OF ALUMINIUM OXIDES AND HYDROXIDES WITH AMMONIUM OXALATE/OXALIC ACID (ISO 12782-3:2012) |
S.R. CEN/TS 16660:2015 | CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TEST - DETERMINATION OF THE REDUCING CHARACTER AND THE REDUCING CAPACITY |
I.S. EN ISO 12782-1:2012 | SOIL QUALITY - PARAMETERS FOR GEOCHEMICAL MODELLING OF LEACHING AND SPECIATION OF CONSTITUENTS IN SOILS AND MATERIALS - PART 1: EXTRACTION OF AMORPHOUS IRON OXIDES AND HYDROXIDES WITH ASCORBIC ACID (ISO 12782-1:2012) |
CEI EN 50625-1 : 2015 | COLLECTION, LOGISTICS & TREATMENT REQUIREMENTS FOR WEEE - PART 1: GENERAL TREATMENT REQUIREMENTS |
UNE-CEN/TR 16110:2011 IN | Characterization of waste - Guidance on the use of ecotoxicity tests applied to waste |
I.S. EN 14997:2015 | CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TEST - INFLUENCE OF PH ON LEACHING WITH CONTINUOUS PH CONTROL |
CEI CLC/TS 50625-3-3 : 1ED 2018 | COLLECTION, LOGISTICS & TREATMENT REQUIREMENTS FOR WEEE - PART 3-3: SPECIFICATION FOR DE-POLLUTION - WEEE CONTAINING CRTS AND FLAT PANEL DISPLAY |
S.R. CEN/TS 16229:2011 | CHARACTERIZATION OF WASTE - SAMPLING AND ANALYSIS OF WEAK ACID DISSOCIABLE CYANIDE DISCHARGED INTO TAILINGS PONDS |
I.S. CEN TR 15310-1:2006 | CHARACTERIZATION OF WASTE - SAMPLING OF WASTE MATERIALS - PART 1: GUIDANCE ON SELECTION AND APPLICATION OF CRITERIA FOR SAMPLING UNDER VARIOUS CONDITIONS |
13/30286655 DC : 0 | BS EN 15863 - CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TEST FOR BASIC CHARACTERIZATION - DYNAMIC MONOLITHIC LEACHING TEST WITH PERIODIC LEACHANT RENEWAL, UNDER FIXED TEST CONDITIONS |
BS EN 15002:2015 | Characterization of waste. Preparation of test portions from the laboratory sample |
CEN/TR 15310-2:2006 | Characterization of waste - Sampling of waste materials - Part 2: Guidance on sampling techniques |
CEN/TS 15864:2015 | Characterization of waste - Leaching behaviour test for basic characterization - Dynamic monolithic leaching test with continuous leachant renewal under conditions relevant for specified scenario(s) |
CEN/TS 14997:2006 | Characterization of waste - Leaching behaviour tests - Influence of pH on leaching with continuous pH-control |
CEN/TR 16110:2010 | Characterization of waste - Guidance on the use of ecotoxicity tests applied to waste |
EN 14429:2015 | Characterization of waste - Leaching behaviour test - Influence of pH on leaching with initial acid/base addition |
CEN/TS 16660:2015 | Characterization of waste - Leaching behaviour test - Determination of the reducing character and the reducing capacity |
CEN/TR 16130:2011 | Characterization of waste - On-site verification |
CEN/TS 15863:2012 | Characterisation of waste - Leaching behaviour test for basic characterisation - Dynamic monolithic leaching test with periodic leachant renewal, under fixed test conditions |
EN 13965-2:2010 | Characterization of waste - Terminology - Part 2: Management related terms and definitions |
ISO 11074-2:1998 | Soil quality Vocabulary Part 2: Terms and definitions relating to sampling |
ISO 10381-3:2001 | Soil quality Sampling Part 3: Guidance on safety |
EN 13965-1 : 2004 COR 2005 | CHARACTERIZATION OF WASTE - TERMINOLOGY - PART 1: MATERIAL RELATED TERMS AND DEFINITIONS |
ISO 3534-1:2006 | Statistics — Vocabulary and symbols — Part 1: General statistical terms and terms used in probability |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.