EN 14180:2014
Current
Current
The latest, up-to-date edition.
Sterilizers for medical purposes - Low temperature steam and formaldehyde sterilizers - Requirements and testing
Published date
21-05-2014
Publisher
Sorry this product is not available in your region.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Technical requirements
5 Process control
6 Performance requirements
7 Sound power and vibration
8 Packaging, marking and labelling
9 Information to be supplied by the manufacturer
10 Service and local environment
Annex A (normative) - Test methods
Annex B (normative) - Sterilizer classification and testing
Annex C (normative) - Test equipment
Annex D (normative) - Determination of formaldehyde residuals
in a filter indicator
Annex E (informative) - Formaldehyde residues on medical devices
Annex F (informative) - Environmental aspects
Annex ZA (informative) - Relationship between this European
Standard and the Essential Requirements of
EU Directive 93/42/EEC on medical devices
Bibliography
This European Standard specifies requirements and tests for LTSF sterilizers, which use a mixture of low temperature steam and formaldehyde as sterilizing agent, and which are working below ambient pressure only.These sterilizers are primarily used for the sterilization of heat labile medical devices in health care facilities.This European Standard specifies minimum requirements: - for the performance and design of sterilizers to ensure that the process is capable of sterilizing medical devices; - for the equipment and controls of these sterilizers necessary for the validation and routine control of the sterilization processes.
| Committee |
CEN/TC 102
|
| DevelopmentNote |
Supersedes PREN 14180. (06/2014)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| UNE-EN 14180:2004 | Identical |
| DIN EN 14180:2003-10 | Identical |
| NEN EN 14180 : 2014 | Identical |
| NBN EN 14180 : 2014 | Identical |
| PN EN 14180 : 2014 | Identical |
| UNI EN 14180 : 2014 | Identical |
| SN EN 14180 : 2014 | Identical |
| GOST EN 14180 : 2011 | Identical |
| DIN EN 14180:2014-09 | Identical |
| I.S. EN 14180:2014 | Identical |
| BS EN 14180:2014 | Identical |
| NF EN 14180 : 2014 | Identical |
| NS EN 14180 : 2014 | Identical |
| UNE-EN 14180:2014 | Identical |
| GOST R EN 14180 : 2008 | Identical |
| AAMI ISO 11607-1 : 2006 : R2010 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS, AND PACKAGING SYSTEMS |
| UNI EN 868-5 : 2009 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 5: SEALABLE POUCHES AND REELS OF POROUS MATERIALS AND PLASTIC FILM CONSTRUCTION - REQUIREMENTS AND TEST METHODS |
| I.S. EN 15424:2007 | STERILIZATION OF MEDICAL DEVICES - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| 14/30255135 DC : 0 | BS EN ISO 11607-1:2009/A1 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS AND PACKAGING SYSTEMS |
| PREN ISO 11140-1 : DRAFT 2012 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 1: GENERAL REQUIREMENTS (ISO/DIS 11140-1:2012) |
| ANSI/AAMI/ISO 11138-5:2017 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - PART 5: BIOLOGICAL INDICATORS FOR LOW-TEMPERATURE STEAM AND FORMALDEHYDE STERILIZATION PROCESSES |
| CSA Z15882 : 2009 : R2014 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - GUIDANCE FOR SELECTION, USE AND INTERPRETATION OF RESULTS |
| 17/30351717 DC : 0 | BS EN ISO 11607-1 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS AND PACKAGING SYSTEMS |
| 05/30066638 DC : DRAFT OCT 2005 | EN 15424 - STERILIZATION OF MEDICAL DEVICES - DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF STERILIZATION PROCESSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE |
| CSA Z11140.1 : 2007 : R2012 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 1: GENERAL REQUIREMENTS |
| AAMI ISO 11607-1 : 2006 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS, AND PACKAGING SYSTEMS |
| I.S. EN 16844:2017+A2:2019 | Aesthetic medicine services - Non-surgical medical treatments |
| I.S. EN 868-5:2009 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 5: SEALABLE POUCHES AND REELS OF POROUS MATERIALS AND PLASTIC FILM CONSTRUCTION - REQUIREMENTS AND TEST METHODS |
| BS EN 868-5:2009 | Packaging for terminally sterilized medical devices Sealable pouches and reels of porous and plastic film construction. Requirements and test methods |
| UNE-EN ISO 11607-1:2017 | Packaging for terminally sterilized medical devices - Part 1: Requirements for materials, sterile barrier systems and packaging systems (ISO 11607-1:2006, including Amd 1:2014) |
| DIN EN ISO 11140-1:2015-03 | Sterilization of health care products - Chemical indicators - Part 1: General requirements (ISO 11140-1:2014) |
| BS EN ISO 11138-5:2017 | Sterilization of health care products. Biological indicators Biological indicators for low-temperature steam and formaldehyde sterilization processes |
| BS EN ISO 11140-1:2014 | Sterilization of health care products. Chemical indicators General requirements |
| BS EN 15424:2007 | Sterilization of medical devices. Low temperature steam and formaldehyde. Requirements for development, validation and routine control of a sterilization process for medical devices |
| DIN EN ISO 15882:2008-12 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - GUIDANCE FOR SELECTION, USE AND INTERPRETATION OF RESULTS |
| EN ISO 11140-1:2014 | Sterilization of health care products - Chemical indicators - Part 1: General requirements (ISO 11140-1:2014) |
| CEN Guide 4:2008 | GUIDE FOR ADDRESSING ENVIRONMENTAL ISSUES IN PRODUCT STANDARDS |
| DIN EN 15424:2007-08 | STERILIZATION OF MEDICAL DEVICES - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| I.S. EN 16372:2014 | AESTHETIC SURGERY SERVICES |
| I.S. EN 16844:2017 | AESTHETIC MEDICINE SERVICES - NON-SURGICAL MEDICAL PROCEDURES |
| 17/30360908 DC : 0 | BS EN 868-5 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 5: SEALABLE POUCHES AND REELS OF POROUS MATERIALS AND PLASTIC FILM CONSTRUCTION - REQUIREMENTS AND TEST METHODS |
| 13/30278952 DC : 0 | BS EN 16372 - AESTHETIC SURGERY AND AESTHETIC NON-SURGICAL MEDICAL SERVICES |
| 12/30238553 DC : 0 | BS EN ISO 11140-1 - STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 1: GENERAL REQUIREMENTS |
| DIN EN 868-5:2009-09 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 5: SEALABLE POUCHES AND REELS OF POROUS MATERIALS AND PLASTIC FILM CONSTRUCTION - REQUIREMENTS AND TEST METHODS |
| ISO Guide 64:2008 | Guide for addressing environmental issues in product standards |
| EN 868-5:2009 | Packaging for terminally sterilized medical devices - Part 5: Sealable pouches and reels of porous materials and plastic film construction - Requirements and test methods |
| NF EN ISO 25424 : 2011 | STERILIZATION OF MEDICAL DEVICES - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| ISO 25424:2009 | Sterilization of medical devices Low temperature steam and formaldehyde Requirements for development, validation and routine control of a sterilization process for medical devices |
| I.S. EN ISO 11140-1:2014 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 1: GENERAL REQUIREMENTS (ISO 11140-1:2014) |
| I.S. EN ISO 11138-5:2017 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - PART 5: BIOLOGICAL INDICATORS FOR LOW-TEMPERATURE STEAM AND FORMALDEHYDE STERILIZATION PROCESSES (ISO 11138-5:2017) |
| I.S. EN ISO 15882:2008 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - GUIDANCE FOR SELECTION, USE AND INTERPRETATION OF RESULTS |
| VDI 6300 Blatt 1:2016-05 | Genetic engineering operations in genetic engineering facilities - Guidance on safe operation of genetic engineering facilities |
| 15/30317874 DC : 0 | BS EN 16844 - AESTHETIC MEDICINE SERVICES - NON-SURGICAL MEDICAL PROCEDURES |
| DIN EN ISO 11607-1:2014-11 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS AND PACKAGING SYSTEMS (ISO 11607-1:2006 + AMD 1.:2014) |
| UNI EN ISO 25424 : 2011 | STERILIZATION OF MEDICAL DEVICES - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| 17/30338806 DC : 0 | BS EN ISO 25424 - STERILIZATION OF HEALTH CARE PRODUCTS - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| AAMI ISO 15882 : 2008 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - GUIDANCE FOR SELECTION, USE AND INTERPRETATION OF RESULTS |
| UNE-EN 16372:2015 | Aesthetic surgery services |
| CSA Z15882:09 (R2019) | Sterilization of health care products - Chemical indicators - Guidance for selection, use and interpretation of results (Adopted ISO 15882:2008, second edition, 2008-09-01) |
| 07/30166933 DC : DRAFT AUG 2007 | BS EN 868-5 - PACKAGING MATERIALS FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 5: SEALABLE POUCHES AND REELS OF POROUS MATERIALS AND PLASTIC FILM CONSTRUCTION - REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 25424:2011 | STERILIZATION OF MEDICAL DEVICES - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| EN 16844:2017 | Aesthetic medicine services - Non-surgical medical treatments |
| BS EN ISO 11607-1:2017 | Packaging for terminally sterilized medical devices Requirements for materials, sterile barrier systems and packaging systems |
| UNE-EN ISO 11140-1:2015 | Sterilization of health care products - Chemical indicators - Part 1: General requirements (ISO 11140-1:2014) |
| UNI EN ISO 15882 : 2009 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - GUIDANCE FOR SELECTION, USE AND INTERPRETATION OF RESULTS |
| CSA ISO 11607-1 : 2016 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS AND PACKAGING SYSTEMS |
| DIN EN ISO 25424:2011-09 | STERILIZATION OF MEDICAL DEVICES - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| PREN 17180 : DRAFT 2017 | STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE VAPORIZED HYDROGEN PEROXIDE STERILIZERS - REQUIREMENTS AND TESTING |
| BS EN ISO 25424:2011 | Sterilization of medical devices. Low temperature steam and formaldehyde. Requirements for development, validation and routine control of a sterilization process for medical devices |
| CSA Z15882 :2009 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - GUIDANCE FOR SELECTION, USE AND INTERPRETATION OF RESULTS |
| ANSI/AAMI/ISO 11607-1:2006/(R)2015 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS, AND PACKAGING SYSTEMS |
| 15/30321514 DC : 0 | BS EN ISO 11138-5 - STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - PART 5: BIOLOGICAL INDICATORS FOR LOW-TEMPERATURE STEAM AND FORMALDEHYDE STERILIZATION PROCESSES |
| CSA Z11140.1 : 2007 : R2012 : FR | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 1: GENERAL REQUIREMENTS |
| CSA Z11140.1 : 2007 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 1: GENERAL REQUIREMENTS |
| UNI EN ISO 11607-1 : 2014 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS AND PACKAGING SYSTEMS |
| BS EN ISO 11607-1:2020 | Packaging for terminally sterilized medical devices Requirements for materials, sterile barrier systems and packaging systems |
| ANSI/AAMI/ISO 15882:2008(R2013) | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - GUIDANCE FOR SELECTION, USE AND INTERPRETATION OF RESULTS |
| ISO 11138-5:2017 | Sterilization of health care products — Biological indicators — Part 5: Biological indicators for low-temperature steam and formaldehyde sterilization processes |
| BS EN ISO 15882:2008 | Sterilization of health care products. Chemical indicators. Guidance for selection, use and interpretation of results |
| EN 16372:2014 | Aesthetic surgery services |
| EN ISO 11138-5:2017 | Sterilization of health care products - Biological indicators - Part 5: Biological indicators for low-temperature steam and formaldehyde sterilization processes (ISO 11138-5:2017) |
| EN 15424:2007 | Sterilization of medical devices - Low temperature steam and formaldehyde - Requirements for development, validation and routine control of a sterilization process for medical devices |
| EN ISO 25424:2011 | Sterilization of medical devices - Low temperature steam and formaldehyde - Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 25424:2009) |
| EN ISO 15882:2008 | Sterilization of health care products - Chemical indicators - Guidance for selection, use and interpretation of results (ISO 15882:2008) |
| BS EN 16372:2014 | Aesthetic surgery services |
| 07/30156704 DC : DRAFT DEC 2007 | BS ISO GUIDE 64 - GUIDE FOR ADDRESSING ENVIRONMENTAL ISSUES IN PRODUCT STANDARDS |
| PREN 868-5 : DRAFT 2017 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 5: SEALABLE POUCHES AND REELS OF POROUS MATERIALS AND PLASTIC FILM CONSTRUCTION - REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 11607-1:2017 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS AND PACKAGING SYSTEMS (ISO 11607-1:2006, INCLUDING AMD 1:2014) |
| BS EN ISO 11607-1 : 2009 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS AND PACKAGING SYSTEMS |
| CSA ISO 11140-1 : 2016 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 1: GENERAL REQUIREMENTS |
| UNE-EN ISO 25424:2011 | Sterilization of medical devices - Low temperature steam and formaldehyde - Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 25424:2009) |
| BS EN 16844 : 2017 | AESTHETIC MEDICINE SERVICES - NON-SURGICAL MEDICAL TREATMENTS |
| ISO 11607-1:2006 | Packaging for terminally sterilized medical devices Part 1: Requirements for materials, sterile barrier systems and packaging systems |
| DIN EN ISO 11138-5:2015-10 (Draft) | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - PART 5: BIOLOGICAL INDICATORS FOR LOW-TEMPERATURE STEAM AND FORMALDEHYDE STERILIZATION PROCESSES (ISO 11138-5:2017) |
| UNE-EN ISO 11138-5:2017 | Sterilization of health care products - Biological indicators - Part 5: Biological indicators for low-temperature steam and formaldehyde sterilization processes (ISO 11138-5:2017) |
| ISO 15882:2008 | Sterilization of health care products — Chemical indicators — Guidance for selection, use and interpretation of results |
| ISO 11140-1:2014 | Sterilization of health care products Chemical indicators Part 1: General requirements |
| CAN/CSA-ISO 11138-5:17 | Sterilization of health care products — Biological indicators — Part 5: Biological indicators for low-temperature steam and formaldehyde sterilization processes (Adopted ISO 11138-5:2017, second edition, 2017-03) |
| IEC 61010-2-040:2015 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials |
| EN 61508-3:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements |
| EN 61010-2-040:2015 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-040 Particular requirements for sterilizers and washer-disinfectors used to treat medical materials |
| ISO 1874-1:2010 | Plastics Polyamide (PA) moulding and extrusion materials Part 1: Designation system and basis for specification |
| EN 61508-1:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements |
| EN 10027-2:2015 | Designation systems for steels - Part 2: Numerical system |
| EN 60584-2:1993 | Thermocouples - Part 2: Tolerances |
| EN 285:2015 | Sterilization - Steam sterilizers - Large sterilizers |
| EN ISO 1874-1:2010 | Plastics - Polyamide (PA) moulding and extrusion materials - Part 1: Designation system and basis for specification (ISO 1874-1:2010) |
| ISO 13732-1:2006 | Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces |
| EN 868-5:2009 | Packaging for terminally sterilized medical devices - Part 5: Sealable pouches and reels of porous materials and plastic film construction - Requirements and test methods |
| EN 1837:1999+A1:2009 | Safety of machinery - Integral lighting of machines |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| ISO 1762:2015 | Paper, board and pulps Determination of residue (ash) on ignition at 525 degrees C |
| ISO 13485:2016 | Medical devices Quality management systems Requirements for regulatory purposes |
| ISO 2758:2014 | Paper Determination of bursting strength |
| ISO 4017:2014 | Fasteners Hexagon head screws Product grades A and B |
| EN 867-5:2001 | Non-biological systems for use in sterilizers - Part 5: Specification for indicator systems and process challenge devices for use in performance testing for small sterilizers Type B and Type S |
| IEC 61508-3:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements (see Functional Safety and IEC 61508) |
| ISO 25424:2009 | Sterilization of medical devices Low temperature steam and formaldehyde Requirements for development, validation and routine control of a sterilization process for medical devices |
| EN 62304:2006/A1:2015 | MEDICAL DEVICE SOFTWARE - SOFTWARE LIFE-CYCLE PROCESSES (IEC 62304:2006/A1:2015) |
| ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
| EN ISO 13732-1:2008 | Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006) |
| EN ISO 228-1:2003 | Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000) |
| EN ISO 11138-1:2017 | Sterilization of health care products - Biological indicators - Part 1: General requirements (ISO 11138-1:2017) |
| ISO 8787:1986 | Paper and board — Determination of capillary rise — Klemm method |
| EN ISO 25424:2011 | Sterilization of medical devices - Low temperature steam and formaldehyde - Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 25424:2009) |
| EN 61326-1:2013 | Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements |
| EN 1041:2008+A1:2013 | Information supplied by the manufacturer of medical devices |
| IEC 62304:2006+AMD1:2015 CSV | Medical device software - Software life cycle processes |
| ISO 3746:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane |
| EN ISO 536:2012 | Paper and board - Determination of grammage (ISO 536:2012) |
| EN ISO 3746:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010) |
| EN 60751:2008 | INDUSTRIAL PLATINUM RESISTANCE THERMOMETERS AND PLATINUM TEMPERATURE SENSORS |
| ISO/TS 11139:2006 | Sterilization of health care products Vocabulary |
| AAMI RD47 : 2008 | REPROCESSING OF HEMODIALYZERS |
| ISO 3781:2011 | Paper and board — Determination of tensile strength after immersion in water |
| EN 62061:2005/A2:2015 | SAFETY OF MACHINERY - FUNCTIONAL SAFETY OF SAFETY-RELATED ELECTRICAL, ELECTRONIC AND PROGRAMMABLE ELECTRONIC CONTROL SYSTEMS (IEC 62061:2005/A2:2015) |
| ISO 13849-2:2012 | Safety of machinery — Safety-related parts of control systems — Part 2: Validation |
| ISO 536:2012 | Paper and board Determination of grammage |
| IEC 60751:2008 | Industrial platinum resistance thermometers and platinum temperature sensors |
| EN ISO 4017:2014 | Fasteners - Hexagon head screws - Product grades A and B (ISO 4017:2014) |
| EN ISO 12100:2010 | Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010) |
| EN ISO 2758:2014 | Paper - Determination of bursting strength (ISO 2758:2014) |
| EN ISO 14971:2012 | Medical devices - Application of risk management to medical devices (ISO 14971:2007, Corrected version 2007-10-01) |
| EN ISO 13849-2:2012 | Safety of machinery - Safety-related parts of control systems - Part 2: Validation (ISO 13849-2:2012) |
| ISO 534:2011 | Paper and board — Determination of thickness, density and specific volume |
| ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
| ISO 11138-1:2017 | Sterilization of health care products — Biological indicators — Part 1: General requirements |
| EN 14222:2003 | Stainless steel shell boilers |
| EN 61010-1:2010 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements |
| EN ISO 17665-1:2006 | Sterilization of health care products - Moist heat - Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 17665-1:2006) |
| IEC 61508-1:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements (see Functional Safety and IEC 61508) |
| ISO 14971:2007 | Medical devices Application of risk management to medical devices |
| IEC 62061:2005+AMD1:2012+AMD2:2015 CSV | Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems |
| ISO 15223-1:2016 | Medical devices Symbols to be used with medical device labels, labelling and information to be supplied Part 1: General requirements |
| IEC 61010-1:2010+AMD1:2016 CSV | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements |
| ISO 11138-5:2017 | Sterilization of health care products — Biological indicators — Part 5: Biological indicators for low-temperature steam and formaldehyde sterilization processes |
| EN 1422:2014 | Sterilizers for medical purposes - Ethylene oxide sterilizers - Requirements and test methods |
| ISO 228-1:2000 | Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
| EN ISO 11138-5:2017 | Sterilization of health care products - Biological indicators - Part 5: Biological indicators for low-temperature steam and formaldehyde sterilization processes (ISO 11138-5:2017) |
| EN ISO 9000:2015 | Quality management systems - Fundamentals and vocabulary (ISO 9000:2015) |
| ISO 17665-1:2006 | Sterilization of health care products — Moist heat — Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices |
| EN ISO 534:2011 | Paper and board - Determination of thickness, density and specific volume (ISO 534:2011) |
| 1997/23/EC : 1997 | DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT |
| EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.