EN 14035-36:2004
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Fireworks - Part 36: Wheels - Specification and test methods
01-09-2010
18-08-2004
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Construction
4.1 Means of ignition
4.2 Attachment of initial fuse
4.3 Protection of initial fuse
4.3.1 General
4.3.2 Initial fuse protected by fuse cover
4.3.3 Initial fuse protected by primary pack or
selection pack
4.3.4 Protruding fuse designed to resist side
ignition
4.4 Height of initial fuse
4.5 Materials of firework case
4.6 Integrity
4.7 Net explosive content
5 Performance
5.1 Initial fuse
5.2 Principal effects
5.3 Functioning
5.4 Explosions
5.5 Sound pressure level
5.6 Burning matter
6 Primary pack or selection pack
7 Minimum labelling requirements
7.1 General
7.2 Type name and category
7.3 Safety information
7.3.1 General
7.3.2 Category 2 wheels
7.3.3 Category 3 wheels
7.3.4 Mounting instructions
7.4 Name, address and telephone number of manufacturer
or distributor or importer
7.5 Reference to this standard
7.6 Printing
7.6.1 Labelling
7.6.2 Type size
7.7 Marking of very small wheels
7.7.1 Reduced size
7.7.2 Reduced information
7.8 Additional information on the primary pack (if
applicable)
8 Test methods
8.1 Attachment of protruding fuse (type test and batch
test)
8.1.1 Apparatus
8.1.2 Procedure
8.2 Performance (type test and batch test)
8.2.1 Test environment
8.2.2 Apparatus
8.2.3 Procedure
8.3 Determination of net explosive content (type test)
8.3.1 Apparatus
8.3.2 Procedure
8.4 Side ignition of initial fuse (type test)
8.4.1 Material
8.4.2 Test area
8.4.3 Apparatus
8.4.4 Test specimen
8.4.5 Procedure
8.5 Labelling (type test and batch test)
Annex A (normative) Type testing
A.1 General
A.2 Number of wheels to be tested
A.3 Thermal conditioning
A.4 Number of primary packs to be examined
A.5 Test report
Annex B (normative) Batch testing
B.1 General
B.2 Sampling plans
B.3 Unit of product
B.4 Nonconformities
B.5 Test report
B.6 Acceptance or rejection of a batch
B.6.1 Nonconforming units
B.6.2 Critical nonconforming units
B.6.3 Major nonconforming units
B.6.4 Minor nonconforming units
B.6.5 Wheels supplied in primary packs or selection
packs
Annex C (normative) Method for determination of smouldering
rate of cigarette
Annex D (informative) A-Deviations
This document specifies requirements for the construction, performance, primary packaging and labelling of wheels and the corresponding test methods. It is applicable to fireworks which are classified as wheels in categories 2 and 3 in EN 14035-2.It is not applicable to wheels containing report composition that includes any of the following substances:-arsenic or arsenic compounds;-mixtures containing a mass fraction of chlorates greater than 80 %;-mixtures of chlorates with metals;-mixtures of chlorates with red phosphorus;-mixtures of chlorates with potassium hexacyanoferrate(II);-mixtures of chlorates with sulfur;-mixtures of chlorates with sulfides;-lead or lead compounds;-mercury compounds;-white phosphorus;-picrates or picric acid;-potassium chlorate with a mass fraction of bromates greater than 0,15 %;-sulfur with an acidity, expressed in mass fraction of sulphuric acid, greater than 0,002 %;-zirconium with a particle size of less than 40 mm.NOTEIn EN 14035-2, wheels are classified as follows:- brief description: non-metallic tube or tubes containing pyrotechnic composition and provided with a means of attaching it to a support so it can rotate;- principal effects: rotation around a fixed point or axis and emission of sparks and flames, with or without aural effect(s).Schemes for type testing of wheels and batch testing of wheels are specified in annex A and annex B respectively.
Committee |
CEN/TC 212
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
BS EN 14035-36:2004 | Identical |
NEN EN 14035-36 : 2004 | Identical |
NF EN 14035-36 : 2005 | Identical |
PN EN 14035-36 : 2005 | Identical |
NS EN 14035-36 : 1ED 2004 | Identical |
UNI EN 14035-36 : 2004 | Identical |
DIN EN 14035-36:2004-11 | Identical |
NBN EN 14035-36 : 2004 | Identical |
SN EN 14035-36 : 2004 | Identical |
UNE-EN 14035-36:2005 | Identical |
I.S. EN 14035-36:2004 | Identical |
IEC 61672-2:2013+AMD1:2017 CSV | Electroacoustics - Sound level meters - Part 2: Pattern evaluation tests |
EN 61672-2:2013/A1:2017 | ELECTROACOUSTICS - SOUND LEVEL METERS - PART 2: PATTERN EVALUATION TESTS (IEC 61672-2:2013/A1:2017) |
EN 61672-1:2013 | Electroacoustics - Sound level meters - Part 1: Specifications |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.