EN 13954:2005+A1:2010
Current
The latest, up-to-date edition.
Food processing machinery - Bread slicers - Safety and hygiene requirements
03-03-2010
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and description
4 List of significant hazards
5 Safety and hygiene requirements and/or
protective measures
6 Verification of safety and hygiene requirements
and/or measures
7 Information for use
Annex A (normative) Noise test code for bread slicers
(Grade 2 of accuracy)
Annex B (normative) Principles of design to ensure the
cleanability of bread slicers
Annex ZA (informative) Relationship between this European
Standard and the Essential
Requirements of EU Directive
98/37/EC, amended by 98/79/EC
Annex ZB (informative) Relationship between this European
Standard and the Essential
Requirements of EU Directive
2006/42/EC
Bibliography
1.1This European Standard specifies safety and hygiene requirements for the design and manufacture of bread slicing machines of type 1 and 2 as defined in Clause 3.The intended use of these machines is to cut baked bread into slices.This European Standard deals with all significant hazards, hazardous situations and events relevant to bread slicers machines, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4).This European Standard covers requirements for the safe operation of the machine including: loading, cutting, unloading, cleaning, crumb removal and maintenance.These machines can be manually or automatically operated.1.2The following machines are excluded from the scope of this document:-experimental and testing machines under development by the manufacturer;-frame cutter machines with multiple blades moving horizontally;-domestic appliances and machines intended for use by the general public;-machines with horizontal circular cutting systems;-rectangular cutting machines for cutting or sawing of panel size products into small pieces.The significant hazards covered by this document are described in Clause 4.1.3In drafting this European Standard, it has been assumed that the bread slicers falling within the scope are operated only by trained personnel and that the machines are not intended to be cleaned with water jet.1.4This European Standard is not applicable to bread slicing machines which are manufactured before the date of publication of this European Standard.
Committee |
CEN/TC 153
|
DevelopmentNote |
2005 Edition Re-issued in March 2010 & incorporates AMD 1 2010. (03/2010)
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Current
|
Standards | Relationship |
NBN EN 13954 : 2006 + A1 2010 | Identical |
NEN EN 13954 : 2005 + A1 2010 | Identical |
NS EN 13954 : 2005 + A1 2010 | Identical |
I.S. EN 13954:2005 | Identical |
PN EN 13954 : 2007 + A1 2010 | Identical |
SN EN 13954+A1:2010 | Identical |
UNE-EN 13954:2006 | Identical |
UNI EN 13954 : 2010 | Identical |
BS EN 13954 : 2005 | Identical |
NF EN 13954 : 2006 + A1 2010 | Identical |
DIN EN 13954:2010-12 | Identical |
UNE-EN 13954:2006+A1:2010 | Identical |
BS EN 13954:2005+A1:2010 | Identical |
BS EN 1672-1:2014 | Food processing machinery. Basic concepts Safety requirements |
I.S. EN 1672-1:2014 | FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS |
UNE-EN 1672-1:2015 | Food processing machinery - Basic concepts - Part 1: Safety requirements |
EN 1672-1:2014 | Food processing machinery - Basic concepts - Part 1: Safety requirements |
DIN EN 1672-1:2014-12 | FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS |
UNI EN 1672-1 : 2014 | FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS |
ISO 4871:1996 | Acoustics — Declaration and verification of noise emission values of machinery and equipment |
CEN/TR 15623:2008 | Food processing machinery - Route map - Materials for food area |
ISO 4287:1997 | Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters |
ISO 12001:1996 | Acoustics — Noise emitted by machinery and equipment — Rules for the drafting and presentation of a noise test code |
ISO 3744:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
EN 1088:1995+A2:2008 | Safety of machinery - Interlocking devices associated with guards - Principles for design and selection |
ISO/TR 11688-1:1995 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning |
EN ISO 14121-1:2007 | Safety of machinery - Risk assessment - Part 1: Principles (ISO 14121-1:2007) |
EN 349:1993+A1:2008 | Safety of machinery - Minimum gaps to avoid crushing of parts of the human body |
IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
EN 1005-2:2003+A1:2008 | Safety of machinery - Human physical performance - Part 2: Manual handling of machinery and component parts of machinery |
EN 614-1:2006+A1:2009 | Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles |
EN ISO 13857:2008 | Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008) |
ISO 14121-1:2007 | Safety of machinery Risk assessment Part 1: Principles |
EN ISO 11201:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010) |
EN ISO 12001:2009 | Acoustics - Noise emitted by machinery and equipment - Rules for the drafting and presentation of a noise test code (ISO 12001:1996) |
EN 1672-2:2005+A1:2009 | Food processing machinery - Basic concepts - Part 2: Hygiene requirements |
EN 61496-1:2013/AC:2015 | SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS (IEC 61496-1:2012) |
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
EN ISO 3744:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) |
EN 14655:2005+A1:2010 | Food processing machinery - Baguette slicers - Safety and hygiene requirements |
EN 953:1997+A1:2009 | Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards |
ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
ISO 13857:2008 | Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs |
IEC 61496-1:2012 | Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests |
ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
EN ISO 13849-1:2015 | Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015) |
EN ISO 4871:2009 | Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) |
IEC 61310-1:2007 | Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals |
EN 1005-3:2002+A1:2008 | Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery operation |
EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
1998/37/EC : 1998 | DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY |
EN ISO 11688-1:2009 | Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995) |
ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
EN 61310-1:2008 | Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals |
ISO 11201:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections |
EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.